diff options
Diffstat (limited to 'src/soc/amd/picasso/data_fabric.c')
-rw-r--r-- | src/soc/amd/picasso/data_fabric.c | 169 |
1 files changed, 169 insertions, 0 deletions
diff --git a/src/soc/amd/picasso/data_fabric.c b/src/soc/amd/picasso/data_fabric.c new file mode 100644 index 0000000000..23cb94c837 --- /dev/null +++ b/src/soc/amd/picasso/data_fabric.c @@ -0,0 +1,169 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <acpi/acpi_device.h> +#include <console/console.h> +#include <cpu/x86/lapic_def.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <device/pci_ops.h> +#include <soc/data_fabric.h> +#include <soc/iomap.h> +#include <soc/pci_devs.h> +#include <stdbool.h> + +static void disable_mmio_reg(int reg) +{ + pci_write_config32(SOC_DF_F0_DEV, NB_MMIO_CONTROL(reg), + IOMS0_FABRIC_ID << MMIO_DST_FABRIC_ID_SHIFT); + pci_write_config32(SOC_DF_F0_DEV, NB_MMIO_BASE(reg), 0); + pci_write_config32(SOC_DF_F0_DEV, NB_MMIO_LIMIT(reg), 0); +} + +static bool is_mmio_reg_disabled(int reg) +{ + uint32_t val = pci_read_config32(SOC_DF_F0_DEV, NB_MMIO_CONTROL(reg)); + return !(val & ((MMIO_WE | MMIO_RE))); +} + +static int find_unused_mmio_reg(void) +{ + unsigned int i; + + for (i = 0; i < NUM_NB_MMIO_REGS; i++) { + if (is_mmio_reg_disabled(i)) + return i; + } + return -1; +} + +void data_fabric_set_mmio_np(void) +{ + /* + * Mark region from HPET-LAPIC or 0xfed00000-0xfee00000-1 as NP. + * + * AGESA has already programmed the NB MMIO routing, however nothing + * is yet marked as non-posted. + * + * If there exists an overlapping routing base/limit pair, trim its + * base or limit to avoid the new NP region. If any pair exists + * completely within HPET-LAPIC range, remove it. If any pair surrounds + * HPET-LAPIC, it must be split into two regions. + * + * TODO(b/156296146): Remove the settings from AGESA and allow coreboot + * to own everything. If not practical, consider erasing all settings + * and have coreboot reprogram them. At that time, make the source + * below more flexible. + * * Note that the code relies on the granularity of the HPET and + * LAPIC addresses being sufficiently large that the shifted limits + * +/-1 are always equivalent to the non-shifted values +/-1. + */ + + unsigned int i; + int reg; + uint32_t base, limit, ctrl; + const uint32_t np_bot = HPET_BASE_ADDRESS >> D18F0_MMIO_SHIFT; + const uint32_t np_top = (LOCAL_APIC_ADDR - 1) >> D18F0_MMIO_SHIFT; + + for (i = 0; i < NUM_NB_MMIO_REGS; i++) { + /* Adjust all registers that overlap */ + ctrl = pci_read_config32(SOC_DF_F0_DEV, NB_MMIO_CONTROL(i)); + if (!(ctrl & (MMIO_WE | MMIO_RE))) + continue; /* not enabled */ + + base = pci_read_config32(SOC_DF_F0_DEV, NB_MMIO_BASE(i)); + limit = pci_read_config32(SOC_DF_F0_DEV, NB_MMIO_LIMIT(i)); + + if (base > np_top || limit < np_bot) + continue; /* no overlap at all */ + + if (base >= np_bot && limit <= np_top) { + disable_mmio_reg(i); /* 100% within, so remove */ + continue; + } + + if (base < np_bot && limit > np_top) { + /* Split the configured region */ + pci_write_config32(SOC_DF_F0_DEV, NB_MMIO_LIMIT(i), np_bot - 1); + reg = find_unused_mmio_reg(); + if (reg < 0) { + /* Although a pair could be freed later, this condition is + * very unusual and deserves analysis. Flag an error and + * leave the topmost part unconfigured. */ + printk(BIOS_ERR, + "Error: Not enough NB MMIO routing registers\n"); + continue; + } + pci_write_config32(SOC_DF_F0_DEV, NB_MMIO_BASE(reg), np_top + 1); + pci_write_config32(SOC_DF_F0_DEV, NB_MMIO_LIMIT(reg), limit); + pci_write_config32(SOC_DF_F0_DEV, NB_MMIO_CONTROL(reg), ctrl); + continue; + } + + /* If still here, adjust only the base or limit */ + if (base <= np_bot) + pci_write_config32(SOC_DF_F0_DEV, NB_MMIO_LIMIT(i), np_bot - 1); + else + pci_write_config32(SOC_DF_F0_DEV, NB_MMIO_BASE(i), np_top + 1); + } + + reg = find_unused_mmio_reg(); + if (reg < 0) { + printk(BIOS_ERR, "Error: cannot configure region as NP\n"); + return; + } + + pci_write_config32(SOC_DF_F0_DEV, NB_MMIO_BASE(reg), np_bot); + pci_write_config32(SOC_DF_F0_DEV, NB_MMIO_LIMIT(reg), np_top); + pci_write_config32(SOC_DF_F0_DEV, NB_MMIO_CONTROL(reg), + (IOMS0_FABRIC_ID << MMIO_DST_FABRIC_ID_SHIFT) | MMIO_NP | MMIO_WE + | MMIO_RE); +} + +static const char *data_fabric_acpi_name(const struct device *dev) +{ + switch (dev->device) { + case PCI_DEVICE_ID_AMD_FAM17H_DF0: + return "DFD0"; + case PCI_DEVICE_ID_AMD_FAM17H_DF1: + return "DFD1"; + case PCI_DEVICE_ID_AMD_FAM17H_DF2: + return "DFD2"; + case PCI_DEVICE_ID_AMD_FAM17H_DF3: + return "DFD3"; + case PCI_DEVICE_ID_AMD_FAM17H_DF4: + return "DFD4"; + case PCI_DEVICE_ID_AMD_FAM17H_DF5: + return "DFD5"; + case PCI_DEVICE_ID_AMD_FAM17H_DF6: + return "DFD6"; + default: + printk(BIOS_ERR, "%s: Unhandled device id 0x%x\n", __func__, dev->device); + } + + return NULL; +} + +static struct device_operations data_fabric_ops = { + .read_resources = noop_read_resources, + .set_resources = noop_set_resources, + .acpi_name = data_fabric_acpi_name, + .acpi_fill_ssdt = acpi_device_write_pci_dev, +}; + +static const unsigned short pci_device_ids[] = { + PCI_DEVICE_ID_AMD_FAM17H_DF0, + PCI_DEVICE_ID_AMD_FAM17H_DF1, + PCI_DEVICE_ID_AMD_FAM17H_DF2, + PCI_DEVICE_ID_AMD_FAM17H_DF3, + PCI_DEVICE_ID_AMD_FAM17H_DF4, + PCI_DEVICE_ID_AMD_FAM17H_DF5, + PCI_DEVICE_ID_AMD_FAM17H_DF6, + 0 +}; + +static const struct pci_driver data_fabric_driver __pci_driver = { + .ops = &data_fabric_ops, + .vendor = PCI_VENDOR_ID_AMD, + .devices = pci_device_ids, +}; |