summaryrefslogtreecommitdiff
path: root/src/soc/amd/phoenix
diff options
context:
space:
mode:
Diffstat (limited to 'src/soc/amd/phoenix')
-rw-r--r--src/soc/amd/phoenix/Kconfig1
-rw-r--r--src/soc/amd/phoenix/fch.c41
-rw-r--r--src/soc/amd/phoenix/include/soc/southbridge.h13
3 files changed, 2 insertions, 53 deletions
diff --git a/src/soc/amd/phoenix/Kconfig b/src/soc/amd/phoenix/Kconfig
index 0acf62ba92..9d45b76203 100644
--- a/src/soc/amd/phoenix/Kconfig
+++ b/src/soc/amd/phoenix/Kconfig
@@ -43,6 +43,7 @@ config SOC_AMD_PHOENIX_BASE
select SOC_AMD_COMMON_BLOCK_DATA_FABRIC_DOMAIN
select SOC_AMD_COMMON_BLOCK_DATA_FABRIC_MULTI_PCI_SEGMENT
select SOC_AMD_COMMON_BLOCK_ESPI_EXTENDED_DECODE_RANGES
+ select SOC_AMD_COMMON_BLOCK_GPP_CLK
select SOC_AMD_COMMON_BLOCK_GRAPHICS # TODO: Check if this is still correct
select SOC_AMD_COMMON_BLOCK_HAS_ESPI
select SOC_AMD_COMMON_BLOCK_HAS_ESPI_ALERT_ENABLE
diff --git a/src/soc/amd/phoenix/fch.c b/src/soc/amd/phoenix/fch.c
index 1e03cda105..779d448682 100644
--- a/src/soc/amd/phoenix/fch.c
+++ b/src/soc/amd/phoenix/fch.c
@@ -128,46 +128,7 @@ static void fch_init_acpi_ports(void)
static void gpp_clk_setup(void)
{
struct soc_amd_phoenix_config *cfg = config_of_soc();
-
- /* look-up table to be able to iterate over the PCIe clock output settings */
- const uint8_t gpp_clk_shift_lut[GPP_CLK_OUTPUT_COUNT] = {
- GPP_CLK0_REQ_SHIFT,
- GPP_CLK1_REQ_SHIFT,
- GPP_CLK2_REQ_SHIFT,
- GPP_CLK3_REQ_SHIFT,
- GPP_CLK4_REQ_SHIFT,
- GPP_CLK5_REQ_SHIFT,
- GPP_CLK6_REQ_SHIFT,
- };
-
- uint32_t gpp_clk_ctl = misc_read32(GPP_CLK_CNTRL);
-
- pcie_gpp_dxio_update_clk_req_config(&cfg->gpp_clk_config[0],
- ARRAY_SIZE(cfg->gpp_clk_config));
- for (int i = 0; i < GPP_CLK_OUTPUT_COUNT; i++) {
- gpp_clk_ctl &= ~GPP_CLK_REQ_MASK(gpp_clk_shift_lut[i]);
- /*
- * The remapping of values is done so that the default of the enum used for the
- * devicetree settings is the clock being enabled, so that a missing devicetree
- * configuration for this will result in an always active clock and not an
- * inactive PCIe clock output. Only the configuration for the clock outputs
- * available on the package is provided via the devicetree; the rest is
- * switched off unconditionally.
- */
- switch (i < GPP_CLK_OUTPUT_AVAILABLE ? cfg->gpp_clk_config[i] : GPP_CLK_OFF) {
- case GPP_CLK_REQ:
- gpp_clk_ctl |= GPP_CLK_REQ_EXT(gpp_clk_shift_lut[i]);
- break;
- case GPP_CLK_OFF:
- gpp_clk_ctl |= GPP_CLK_REQ_OFF(gpp_clk_shift_lut[i]);
- break;
- case GPP_CLK_ON:
- default:
- gpp_clk_ctl |= GPP_CLK_REQ_ON(gpp_clk_shift_lut[i]);
- }
- }
-
- misc_write32(GPP_CLK_CNTRL, gpp_clk_ctl);
+ gpp_clk_setup_common(&cfg->gpp_clk_config[0], ARRAY_SIZE(cfg->gpp_clk_config));
}
static void cgpll_clock_gate_init(void)
diff --git a/src/soc/amd/phoenix/include/soc/southbridge.h b/src/soc/amd/phoenix/include/soc/southbridge.h
index 9b84934258..db0e30440d 100644
--- a/src/soc/amd/phoenix/include/soc/southbridge.h
+++ b/src/soc/amd/phoenix/include/soc/southbridge.h
@@ -84,20 +84,7 @@
#define FCH_LEGACY_UART_DECODE (ALINK_AHB_ADDRESS + 0x20) /* 0xfedc0020 */
/* FCH MISC Registers 0xfed80e00 */
-#define GPP_CLK_CNTRL 0x00
-#define GPP_CLK0_REQ_SHIFT 0
-#define GPP_CLK1_REQ_SHIFT 2
-#define GPP_CLK4_REQ_SHIFT 4
-#define GPP_CLK2_REQ_SHIFT 6
-#define GPP_CLK3_REQ_SHIFT 8
-#define GPP_CLK5_REQ_SHIFT 10
-#define GPP_CLK6_REQ_SHIFT 12
-#define GPP_CLK_OUTPUT_COUNT 7
#define GPP_CLK_OUTPUT_AVAILABLE 7
-#define GPP_CLK_REQ_MASK(clk_shift) (0x3 << (clk_shift))
-#define GPP_CLK_REQ_ON(clk_shift) (0x3 << (clk_shift))
-#define GPP_CLK_REQ_EXT(clk_shift) (0x1 << (clk_shift))
-#define GPP_CLK_REQ_OFF(clk_shift) (0x0 << (clk_shift))
#define MISC_CLKGATEDCNTL 0x2c
#define ALINKCLK_GATEOFFEN BIT(16)