diff options
Diffstat (limited to 'src/soc/amd/glinda/chip.h')
| -rw-r--r-- | src/soc/amd/glinda/chip.h | 113 |
1 files changed, 113 insertions, 0 deletions
diff --git a/src/soc/amd/glinda/chip.h b/src/soc/amd/glinda/chip.h new file mode 100644 index 0000000000..d33261fa19 --- /dev/null +++ b/src/soc/amd/glinda/chip.h @@ -0,0 +1,113 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +/* TODO: Update for Glinda */ + +#ifndef GLINDA_CHIP_H +#define GLINDA_CHIP_H + +#include <amdblocks/chip.h> +#include <amdblocks/i2c.h> +#include <gpio.h> +#include <soc/i2c.h> +#include <soc/southbridge.h> +#include <drivers/i2c/designware/dw_i2c.h> +#include <types.h> +#include <vendorcode/amd/fsp/glinda/FspUsb.h> + +struct soc_amd_glinda_config { + struct soc_amd_common_config common_config; + u8 i2c_scl_reset; + struct dw_i2c_bus_config i2c[I2C_CTRLR_COUNT]; + struct i2c_pad_control i2c_pad[I2C_CTRLR_COUNT]; + + /* Enable S0iX support */ + bool s0ix_enable; + + enum { + DOWNCORE_AUTO = 0, + DOWNCORE_1 = 1, /* Run with 1 physical core */ + DOWNCORE_2 = 3, /* Run with 2 physical cores */ + DOWNCORE_3 = 4, /* Run with 3 physical cores */ + DOWNCORE_4 = 6, /* Run with 4 physical cores */ + DOWNCORE_5 = 8, /* Run with 5 physical cores */ + DOWNCORE_6 = 9, /* Run with 6 physical cores */ + DOWNCORE_7 = 10, /* Run with 7 physical cores */ + } downcore_mode; + bool disable_smt; /* disable second thread on all physical cores */ + + uint8_t stt_control; + uint8_t stt_pcb_sensor_count; + uint16_t stt_min_limit; + uint16_t stt_m1; + uint16_t stt_m2; + uint16_t stt_m3; + uint16_t stt_m4; + uint16_t stt_m5; + uint16_t stt_m6; + uint16_t stt_c_apu; + uint16_t stt_c_gpu; + uint16_t stt_c_hs2; + uint16_t stt_alpha_apu; + uint16_t stt_alpha_gpu; + uint16_t stt_alpha_hs2; + uint16_t stt_skin_temp_apu; + uint16_t stt_skin_temp_gpu; + uint16_t stt_skin_temp_hs2; + uint16_t stt_error_coeff; + uint16_t stt_error_rate_coefficient; + + /* Default */ + uint8_t stapm_boost; + uint32_t stapm_time_constant_s; + uint32_t apu_only_sppt_limit; + uint32_t sustained_power_limit_mW; + uint32_t fast_ppt_limit_mW; + uint32_t slow_ppt_limit_mW; + uint32_t slow_ppt_time_constant_s; + uint32_t thermctl_limit_degreeC; + uint32_t vrm_current_limit_mA; + uint32_t vrm_maximum_current_limit_mA; + uint32_t vrm_soc_current_limit_mA; + /* Throttle (e.g., Low/No Battery) */ + uint32_t vrm_current_limit_throttle_mA; + uint32_t vrm_maximum_current_limit_throttle_mA; + uint32_t vrm_soc_current_limit_throttle_mA; + + uint8_t smartshift_enable; + + uint8_t system_configuration; + + uint8_t cppc_ctrl; + uint8_t cppc_perf_limit_max_range; + uint8_t cppc_perf_limit_min_range; + uint8_t cppc_epp_max_range; + uint8_t cppc_epp_min_range; + uint8_t cppc_preferred_cores; + + /* telemetry settings */ + uint32_t telemetry_vddcrvddfull_scale_current_mA; + uint32_t telemetry_vddcrvddoffset; + uint32_t telemetry_vddcrsocfull_scale_current_mA; + uint32_t telemetry_vddcrsocoffset; + + /* The array index is the general purpose PCIe clock output number. Values in here + aren't the values written to the register to have the default to be always on. */ + enum { + GPP_CLK_ON, /* GPP clock always on; default */ + GPP_CLK_REQ, /* GPP clock controlled by corresponding #CLK_REQx pin */ + GPP_CLK_OFF, /* GPP clk off */ + } gpp_clk_config[GPP_CLK_OUTPUT_AVAILABLE]; + + /* performance policy for the PCIe links: power consumption vs. link speed */ + enum { + DXIO_PSPP_DISABLED = 0, + DXIO_PSPP_PERFORMANCE, + DXIO_PSPP_BALANCED, + DXIO_PSPP_POWERSAVE, + } pspp_policy; + + uint8_t usb_phy_custom; + struct usb_phy_config usb_phy; +}; + +#endif /* GLINDA_CHIP_H */ |