diff options
Diffstat (limited to 'src/northbridge')
-rw-r--r-- | src/northbridge/via/cx700/cx700_lpc.c | 96 |
1 files changed, 3 insertions, 93 deletions
diff --git a/src/northbridge/via/cx700/cx700_lpc.c b/src/northbridge/via/cx700/cx700_lpc.c index 90e453945e..115d66c235 100644 --- a/src/northbridge/via/cx700/cx700_lpc.c +++ b/src/northbridge/via/cx700/cx700_lpc.c @@ -31,102 +31,11 @@ #include <pc80/isa-dma.h> #include <cpu/x86/lapic.h> +#include <arch/ioapic.h> #include <stdlib.h> #define ACPI_IO_BASE 0x400 #define HPET_ADDR 0xfe800000UL -#define IOAPIC_ADDR 0xfec00000ULL - -#if CONFIG_IOAPIC -struct ioapicreg { - unsigned int reg; - unsigned int value_low, value_high; -}; - -static struct ioapicreg ioapicregvalues[] = { -#define ALL (0xff << 24) -#define NONE (0) -#define DISABLED (1 << 16) -#define ENABLED (0 << 16) -#define TRIGGER_EDGE (0 << 15) -#define TRIGGER_LEVEL (1 << 15) -#define POLARITY_HIGH (0 << 13) -#define POLARITY_LOW (1 << 13) -#define PHYSICAL_DEST (0 << 11) -#define LOGICAL_DEST (1 << 11) -#define ExtINT (7 << 8) -#define NMI (4 << 8) -#define SMI (2 << 8) -#define INT (1 << 8) - /* IO-APIC virtual wire mode configuration */ - /* mask, trigger, polarity, destination, delivery, vector */ - { 0, ENABLED | TRIGGER_EDGE | POLARITY_HIGH | PHYSICAL_DEST | ExtINT, NONE}, - { 1, DISABLED, NONE}, - { 2, DISABLED, NONE}, - { 3, DISABLED, NONE}, - { 4, DISABLED, NONE}, - { 5, DISABLED, NONE}, - { 6, DISABLED, NONE}, - { 7, DISABLED, NONE}, - { 8, DISABLED, NONE}, - { 9, DISABLED, NONE}, - {10, DISABLED, NONE}, - {11, DISABLED, NONE}, - {12, DISABLED, NONE}, - {13, DISABLED, NONE}, - {14, DISABLED, NONE}, - {15, DISABLED, NONE}, - {16, DISABLED, NONE}, - {17, DISABLED, NONE}, - {18, DISABLED, NONE}, - {19, DISABLED, NONE}, - {20, DISABLED, NONE}, - {21, DISABLED, NONE}, - {22, DISABLED, NONE}, - {23, DISABLED, NONE}, -}; - -static void setup_ioapic(void) -{ - int i; - unsigned long value_low, value_high, val; - unsigned long ioapic_base = IOAPIC_ADDR; - volatile unsigned long *l; - struct ioapicreg *a = ioapicregvalues; - unsigned long bsp_lapicid = lapicid(); - - l = (unsigned long *)ioapic_base; - - /* Set APIC ADDR */ - l[0] = 0; - val = l[4]; - l[4] = (val & 0xF0FFFF) | (2 << 24); // 2 == ID as programmed elsewhere. should be a define? XXX - - /* Set APIC to FSB message bus. */ - l[0] = 0x3; - val = l[4]; - l[4] = (val & 0xFFFFFE) | 1; - - ioapicregvalues[0].value_high = bsp_lapicid << (56 - 32); - - printk_debug("IOAPIC: Bootstrap Processor Local APIC ID = %02x\n", bsp_lapicid); - - for (i = 0; i < ARRAY_SIZE(ioapicregvalues); i++, a++) { - l[0] = (a->reg * 2) + 0x10; - l[4] = a->value_low; - value_low = l[4]; - l[0] = (a->reg * 2) + 0x11; - l[4] = a->value_high; - value_high = l[4]; - if ((i == 0) && (value_low == 0xffffffff)) { - printk_warning("IOAPIC is not responding.\n"); - return; - } - printk_debug("IOAPIC: IRQ reg 0x%08x value 0x%08x 0x%08x\n", - a->reg, a->value_low, a->value_high); - } -} -#endif static const unsigned char pci_irqs[4] = { 11, 11, 10, 10 }; @@ -369,7 +278,8 @@ static void cx700_lpc_init(struct device *dev) cx700_set_lpc_registers(dev); #if CONFIG_IOAPIC - setup_ioapic(); +#define IO_APIC_ID 2 + setup_ioapic(IO_APIC_ADDR, IO_APIC_ID); #endif /* Initialize interrupts */ |