diff options
Diffstat (limited to 'src/northbridge')
-rw-r--r-- | src/northbridge/via/cx700/cx700_registers.h | 238 | ||||
-rw-r--r-- | src/northbridge/via/cx700/cx700_vga.c | 84 | ||||
-rw-r--r-- | src/northbridge/via/cx700/raminit.c | 241 |
3 files changed, 305 insertions, 258 deletions
diff --git a/src/northbridge/via/cx700/cx700_registers.h b/src/northbridge/via/cx700/cx700_registers.h index 996c00f015..b63984f67f 100644 --- a/src/northbridge/via/cx700/cx700_registers.h +++ b/src/northbridge/via/cx700/cx700_registers.h @@ -36,237 +36,11 @@ #define SCRATCH_DRAM_256M_BIT 0xee #define SCRATCH_FLAGS 0xef -static const u8 Reg_Val[] = { -/* REG, VALUE */ - 0x70, 0x33, - 0x71, 0x11, - 0x72, 0x33, - 0x73, 0x11, - 0x74, 0x20, - 0x75, 0x2e, - 0x76, 0x64, - 0x77, 0x00, - 0x78, 0x44, - 0x79, 0xaa, - 0x7a, 0x33, - 0x7b, 0xaa, - 0x7c, 0x00, - 0x7e, 0x33, - 0x7f, 0x33, - 0x80, 0x44, - 0x81, 0x44, - 0x82, 0x44, - 0x83, 0x02, - 0x50, 0x88, - 0x51, 0x7b, - 0x52, 0x6f, - 0x53, 0x88, - 0x54, 0x0e, - 0x55, 0x00, - 0x56, 0x00, - 0x59, 0x00, - 0x5d, 0x72, - 0x5e, 0x88, - 0x5f, 0xc7, - 0x68, 0x01, -}; +#define DDRII_666 0x5 +#define DDRII_533 0x4 +#define DDRII_400 0x3 +#define DDRII_333 0x2 +#define DDRII_266 0x1 +#define DDRII_200 0x0 -/* Host registers initial value */ -static const u8 Host_Reg_Val[] = { -/* REG, VALUE */ - 0x60, 0xff, - 0x61, 0xff, - 0x62, 0x0f, - 0x63, 0xff, - 0x64, 0xff, - 0x65, 0x0f, - 0x66, 0xff, - 0x67, 0x30, -}; -static const u8 Mem_Reg_Init[] = { -/* REG, AND, OR */ - 0x50, 0x11, 0x66, - 0x51, 0x11, 0x66, - 0x52, 0x00, 0x11, - 0x53, 0x00, 0x0f, - 0x54, 0x00, 0x00, - 0x55, 0x00, 0x00, - 0x56, 0x00, 0x00, - 0x57, 0x00, 0x00, - 0x60, 0x00, 0x00, - 0x62, 0xf7, 0x08, - 0x65, 0x00, 0xd9, - 0x66, 0x00, 0x80, - 0x67, 0x00, 0x50, /* OR 0x00 ?? */ - 0x69, 0xf0, 0x00, - 0x6a, 0x00, 0x00, - 0x6d, 0xcf, 0xc0, - 0x6e, 0xff, 0x80, - 0x75, 0x0f, 0x40, - 0x77, 0x00, 0x00, - 0x80, 0x00, 0x00, - 0x81, 0x00, 0x00, - 0x82, 0x00, 0x00, - 0x83, 0x00, 0x00, - 0x84, 0x00, 0x00, - 0x85, 0x00, 0x00, - 0x86, 0xff, 0x2c, /* OR 0x28 if we don't want enable top 1M SM memory */ - 0x40, 0x00, 0x00, - 0x7c, 0x00, 0x00, - 0x7e, 0x00, 0x00, - 0xa4, 0xfe, 0x00, - 0xb0, 0x7f, 0x80, - 0xb1, 0x00, 0xaa, - 0xb4, 0xfd, 0x02, - 0xb8, 0xfe, 0x00, -}; - -static const u8 Dram_Driving_ODT_CTRL[] = { -/* REG, VALUE */ - 0xd6, 0xa8, - 0xd4, 0x80, - 0xd0, 0x88, - 0xd3, 0x01, - 0xd8, 0x00, - 0xda, 0x80, -}; - -#define Rank0_ODT 0x00 -#define Rank1_ODT 0x01 -#define Rank2_ODT 0x02 -#define Rank3_ODT 0x03 -#define NA_ODT 0x00 -#define NB_ODT_75ohm 0x00 -#define NB_ODT_150ohm 0x01 -#define DDR2_ODT_75ohm 0x20 -#define DDR2_ODT_150ohm 0x40 - -static const u8 ODT_TBL[] = { -/* RankMap, ODT Control Bits, DRAM & NB ODT setting */ - 0x01, ((NA_ODT << 6) | (NA_ODT << 4) | (NA_ODT << 2) | Rank0_ODT), (DDR2_ODT_150ohm | NB_ODT_75ohm), - 0x03, ((NA_ODT << 6) | (NA_ODT << 4) | (Rank0_ODT << 2) | Rank1_ODT), (DDR2_ODT_150ohm | NB_ODT_75ohm), - 0x04, ((NA_ODT << 6) | (Rank2_ODT << 4) | (NA_ODT << 2) | NA_ODT), (DDR2_ODT_150ohm | NB_ODT_75ohm), - 0x05, ((NA_ODT << 6) | (Rank0_ODT << 4) | (NA_ODT << 2) | Rank2_ODT), (DDR2_ODT_75ohm | NB_ODT_150ohm), - 0x07, ((NA_ODT << 6) | (Rank0_ODT << 4) | (Rank2_ODT << 2) | Rank2_ODT), (DDR2_ODT_75ohm | NB_ODT_150ohm), - 0x0c, ((Rank2_ODT << 6) | (Rank3_ODT << 4) | (NA_ODT << 2) | NA_ODT), (DDR2_ODT_150ohm | NB_ODT_75ohm), - 0x0d, ((Rank0_ODT << 6) | (Rank0_ODT << 4) | (NA_ODT << 2) | Rank2_ODT), (DDR2_ODT_75ohm | NB_ODT_150ohm), - 0x0f, ((Rank0_ODT << 6) | (Rank0_ODT << 4) | (Rank2_ODT << 2) | Rank2_ODT), (DDR2_ODT_75ohm | NB_ODT_150ohm), -}; - -static const u8 DQS_DQ_TBL[] = { -/* RxE0: DRAM Timing DQS */ -/* RxE2: DRAM Timing DQ */ -/* RxE0, RxE2 */ - 0xee, 0xba, - 0xee, 0xba, - 0xcc, 0xba, - 0xcc, 0xba, -}; - -static const u8 Duty_Control_DDR2[] = { -/* RxEC, RxED, RxEE, RXEF */ - /* DDRII533 1~2 rank, DDRII400 */ - 0x84, 0x10, 0x00, 0x10, - /* DDRII533 3~4 rank */ - 0x44, 0x10, 0x00, 0x10, -}; - -static const u8 ChA_Clk_Phase_DDR2_Table[] = { -/* Rx91, Rx92, Rx93 */ - /* DDRII533 1 rank */ - 0x04, 0x05, 0x06, - /* DDRII533 2~4 rank */ - 0x04, 0x05, 0x05, - /* DDRII400 */ - 0x02, 0x04, 0x04, -}; - -static const u8 DQ_DQS_Table[] = { -/* REG, VALUE */ -/* DRAM DQ/DQS Output Delay Control */ - 0xdc, 0x65, - 0xdd, 0x01, - 0xde, 0xc0, -/* DRAM DQ/DQS input Capture Control */ - 0x78, 0x83, - 0x79, 0x83, - 0x7a, 0x00, -}; - -static const u8 DQSOChA_DDR2_Driving_Table[] = { -/* Rx70, Rx71 */ - /* DDRII533 1~2 rank */ - 0x00, 0x01, - /* DDRII533 3~4 rank */ - 0x03, 0x00, - /* DDRII400 1~2 rank */ - 0x00, 0x04, - /* DDRII400 3~4 rank */ - 0x00, 0x01, -}; - -/************************************************************************/ -/* Chipset Performance UP and other setting after DRAM Sizing Registers */ -/************************************************************************/ -static const u8 Dram_Table[] = { -/* REG, AND, OR */ - 0x60, 0xff, 0x03, - 0x66, 0xcf, 0x80, - 0x68, 0x00, 0x00, - 0x69, 0xfd, 0x03, - 0x6e, 0xff, 0x01, - 0x95, 0xff, 0x40, -}; - -static const u8 Host_Table[] = { -/* REG, AND, OR */ - 0x51, 0x81, 0x7a, - 0x55, 0xff, 0x06, - 0x5e, 0x00, 0x88, - 0x5d, 0xff, 0xb2, -}; - -static const u8 Init_Rank_Reg_Table[] = { - /* Rank Ending Address Registers */ - 0x40, 0x41, 0x42, 0x43, - /* Rank Beginning Address Registers */ - 0x48, 0x49, 0x4a, 0x4b, - /* Physical-to-Virtual Rank Mapping Registers */ - 0x54, 0x55, -}; - -static const u16 DDR2_MRS_table[] = { -/* CL: 2, 3, 4, 5 */ - 0x150, 0x1d0, 0x250, 0x2d0, /* BL=4 ;Use 1X-bandwidth MA table to init DRAM */ - 0x158, 0x1d8, 0x258, 0x2d8, /* BL=8 ;Use 1X-bandwidth MA table to init DRAM */ -}; - -#define MRS_DDR2_TWR2 ((0 << 15) | (0 << 20) | (1 << 12)) -#define MRS_DDR2_TWR3 ((0 << 15) | (1 << 20) | (0 << 12)) -#define MRS_DDR2_TWR4 ((0 << 15) | (1 << 20) | (1 << 12)) -#define MRS_DDR2_TWR5 ((1 << 15) | (0 << 20) | (0 << 12)) -static const u32 DDR2_Twr_table[] = { - MRS_DDR2_TWR2, - MRS_DDR2_TWR3, - MRS_DDR2_TWR4, - MRS_DDR2_TWR5, -}; - -static const u8 DQSI_Rate_Table[] = { - 8, /* DDRII 200 */ - 8, /* DDRII 266 */ - 8, /* DDRII 333 */ - 7, /* DDRII 400 */ - 8, /* DDRII 533 */ - 8, /* DDRII 666 */ -}; - -static const u8 REFC_Table[] = { - 0x65, 0x32, /* DDRII 100 */ - 0x86, 0x43, /* DDRII 266 */ - 0xa8, 0x54, /* DDRII 333 */ - 0xca, 0x65, /* DDRII 400 */ - 0xca, 0x86, /* DDRII 533 */ - 0xca, 0xa8, /* DDRII 666 */ -}; diff --git a/src/northbridge/via/cx700/cx700_vga.c b/src/northbridge/via/cx700/cx700_vga.c index 8cf107c955..c9d7465a84 100644 --- a/src/northbridge/via/cx700/cx700_vga.c +++ b/src/northbridge/via/cx700/cx700_vga.c @@ -30,6 +30,7 @@ #include <cpu/x86/mtrr.h> #include <cpu/x86/msr.h> #include <arch/interrupt.h> +#include "cx700_registers.h" #include "chip.h" #include "northbridge.h" @@ -45,34 +46,79 @@ static int via_cx700_int15_handler(struct eregs *regs) { int res=-1; + u8 mem_speed; + +#define MEMORY_SPEED_66MHZ (0 << 4) +#define MEMORY_SPEED_100MHZ (1 << 4) +#define MEMORY_SPEED_133MHZ (1 << 4) +#define MEMORY_SPEED_200MHZ (3 << 4) // DDR200 +#define MEMORY_SPEED_266MHZ (4 << 4) // DDR266 +#define MEMORY_SPEED_333MHZ (5 << 4) // DDR333 +#define MEMORY_SPEED_400MHZ (6 << 4) // DDR400 +#define MEMORY_SPEED_533MHZ (7 << 4) // DDR533 +#define MEMORY_SPEED_667MHZ (8 << 4) // DDR667 + + const u8 memory_mapping[6] = { + MEMORY_SPEED_200MHZ, MEMORY_SPEED_266MHZ, + MEMORY_SPEED_333MHZ, MEMORY_SPEED_400MHZ, + MEMORY_SPEED_533MHZ, MEMORY_SPEED_667MHZ + }; + printk(BIOS_DEBUG, "via_cx700_int15_handler\n"); + switch(regs->eax & 0xffff) { - case 0x5f19: + case 0x5f00: /* VGA POST Initialization Signal */ + regs->eax = (regs->eax & 0xffff0000 ) | 0x5f; + res = 0; break; - case 0x5f18: - regs->eax=0x5f; - regs->ebx=0x545; // MCLK = 133, 32M frame buffer, 256 M main memory - regs->ecx=0x060; - res=0; + + case 0x5f01: /* Software Panel Type Configuration */ + regs->eax = (regs->eax & 0xffff0000 ) | 0x5f; + // panel type = 2 = 1024 * 768 + regs->ecx = (regs->ecx & 0xffffff00 ) | 2; + res = 0; break; - case 0x5f00: - regs->eax = 0x8600; + + case 0x5f27: /* Boot Device Selection */ + regs->eax = (regs->eax & 0xffff0000 ) | 0x5f; + + regs->ebx = 0x00000000; // 0 -> default + regs->ecx = 0x00000000; // 0 -> default + // TV Layout - default + regs->edx = (regs->edx & 0xffffff00) | 0; + res=0; break; - case 0x5f01: - regs->eax = 0x5f; - regs->ecx = (regs->ecx & 0xffffff00 ) | 2; // panel type = 2 = 1024 * 768 - res = 0; + + case 0x5f0b: /* Get Expansion Setting */ + regs->eax = (regs->eax & 0xffff0000 ) | 0x5f; + + regs->ecx = regs->ecx & 0xffffff00; // non-expansion + // regs->ecx = regs->ecx & 0xffffff00 | 1; // expansion + res=0; break; - case 0x5f02: - regs->eax=0x5f; - regs->ebx= (regs->ebx & 0xffff0000) | 2; - regs->ecx= (regs->ecx & 0xffff0000) | 0x401; // PAL + crt only - regs->edx= (regs->edx & 0xffff0000) | 0; // TV Layout - default + + case 0x5f0f: /* VGA Post Completion */ + regs->eax = (regs->eax & 0xffff0000 ) | 0x5f; res=0; break; - case 0x5f0f: - regs->eax=0x860f; + + case 0x5f18: + regs->eax = (regs->eax & 0xffff0000 ) | 0x5f; +#define UMA_SIZE_8MB (3 << 0) +#define UMA_SIZE_16MB (4 << 0) +#define UMA_SIZE_32MB (5 << 0) + + regs->ebx = (regs->ebx & 0xffff0000 ) | MEMORY_SPEED_533MHZ | UMA_SIZE_32MB; + + mem_speed = pci_read_config8(dev_find_slot(0, PCI_DEVFN(0, 4)), SCRATCH_DRAM_FREQ); + if (mem_speed > 5) + mem_speed = 5; + + regs->ebx |= memory_mapping[mem_speed]; break; + + res=0; break; + default: printk(BIOS_DEBUG, "Unknown INT15 function %04x!\n", regs->eax & 0xffff); diff --git a/src/northbridge/via/cx700/raminit.c b/src/northbridge/via/cx700/raminit.c index b562a867b9..6693724ad4 100644 --- a/src/northbridge/via/cx700/raminit.c +++ b/src/northbridge/via/cx700/raminit.c @@ -39,13 +39,6 @@ #define HOSTCTRL PCI_DEV(0, 0, 2) #define MEMCTRL PCI_DEV(0, 0, 3) -#define DDRII_666 0x5 -#define DDRII_533 0x4 -#define DDRII_400 0x3 -#define DDRII_333 0x2 -#define DDRII_266 0x1 -#define DDRII_200 0x0 - #define OHM_150 1 #ifdef MEM_WIDTH_32BIT_MODE @@ -114,6 +107,240 @@ } \ } +static const u8 Reg_Val[] = { +/* REG, VALUE */ + 0x70, 0x33, + 0x71, 0x11, + 0x72, 0x33, + 0x73, 0x11, + 0x74, 0x20, + 0x75, 0x2e, + 0x76, 0x64, + 0x77, 0x00, + 0x78, 0x44, + 0x79, 0xaa, + 0x7a, 0x33, + 0x7b, 0xaa, + 0x7c, 0x00, + 0x7e, 0x33, + 0x7f, 0x33, + 0x80, 0x44, + 0x81, 0x44, + 0x82, 0x44, + 0x83, 0x02, + 0x50, 0x88, + 0x51, 0x7b, + 0x52, 0x6f, + 0x53, 0x88, + 0x54, 0x0e, + 0x55, 0x00, + 0x56, 0x00, + 0x59, 0x00, + 0x5d, 0x72, + 0x5e, 0x88, + 0x5f, 0xc7, + 0x68, 0x01, +}; + +/* Host registers initial value */ +static const u8 Host_Reg_Val[] = { +/* REG, VALUE */ + 0x60, 0xff, + 0x61, 0xff, + 0x62, 0x0f, + 0x63, 0xff, + 0x64, 0xff, + 0x65, 0x0f, + 0x66, 0xff, + 0x67, 0x30, +}; + +static const u8 Mem_Reg_Init[] = { +/* REG, AND, OR */ + 0x50, 0x11, 0x66, + 0x51, 0x11, 0x66, + 0x52, 0x00, 0x11, + 0x53, 0x00, 0x0f, + 0x54, 0x00, 0x00, + 0x55, 0x00, 0x00, + 0x56, 0x00, 0x00, + 0x57, 0x00, 0x00, + 0x60, 0x00, 0x00, + 0x62, 0xf7, 0x08, + 0x65, 0x00, 0xd9, + 0x66, 0x00, 0x80, + 0x67, 0x00, 0x50, /* OR 0x00 ?? */ + 0x69, 0xf0, 0x00, + 0x6a, 0x00, 0x00, + 0x6d, 0xcf, 0xc0, + 0x6e, 0xff, 0x80, + 0x75, 0x0f, 0x40, + 0x77, 0x00, 0x00, + 0x80, 0x00, 0x00, + 0x81, 0x00, 0x00, + 0x82, 0x00, 0x00, + 0x83, 0x00, 0x00, + 0x84, 0x00, 0x00, + 0x85, 0x00, 0x00, + 0x86, 0xff, 0x2c, /* OR 0x28 if we don't want enable top 1M SM memory */ + 0x40, 0x00, 0x00, + 0x7c, 0x00, 0x00, + 0x7e, 0x00, 0x00, + 0xa4, 0xfe, 0x00, + 0xb0, 0x7f, 0x80, + 0xb1, 0x00, 0xaa, + 0xb4, 0xfd, 0x02, + 0xb8, 0xfe, 0x00, +}; + +static const u8 Dram_Driving_ODT_CTRL[] = { +/* REG, VALUE */ + 0xd6, 0xa8, + 0xd4, 0x80, + 0xd0, 0x88, + 0xd3, 0x01, + 0xd8, 0x00, + 0xda, 0x80, +}; + +#define Rank0_ODT 0x00 +#define Rank1_ODT 0x01 +#define Rank2_ODT 0x02 +#define Rank3_ODT 0x03 +#define NA_ODT 0x00 +#define NB_ODT_75ohm 0x00 +#define NB_ODT_150ohm 0x01 +#define DDR2_ODT_75ohm 0x20 +#define DDR2_ODT_150ohm 0x40 + +static const u8 ODT_TBL[] = { +/* RankMap, ODT Control Bits, DRAM & NB ODT setting */ + 0x01, ((NA_ODT << 6) | (NA_ODT << 4) | (NA_ODT << 2) | Rank0_ODT), (DDR2_ODT_150ohm | NB_ODT_75ohm), + 0x03, ((NA_ODT << 6) | (NA_ODT << 4) | (Rank0_ODT << 2) | Rank1_ODT), (DDR2_ODT_150ohm | NB_ODT_75ohm), + 0x04, ((NA_ODT << 6) | (Rank2_ODT << 4) | (NA_ODT << 2) | NA_ODT), (DDR2_ODT_150ohm | NB_ODT_75ohm), + 0x05, ((NA_ODT << 6) | (Rank0_ODT << 4) | (NA_ODT << 2) | Rank2_ODT), (DDR2_ODT_75ohm | NB_ODT_150ohm), + 0x07, ((NA_ODT << 6) | (Rank0_ODT << 4) | (Rank2_ODT << 2) | Rank2_ODT), (DDR2_ODT_75ohm | NB_ODT_150ohm), + 0x0c, ((Rank2_ODT << 6) | (Rank3_ODT << 4) | (NA_ODT << 2) | NA_ODT), (DDR2_ODT_150ohm | NB_ODT_75ohm), + 0x0d, ((Rank0_ODT << 6) | (Rank0_ODT << 4) | (NA_ODT << 2) | Rank2_ODT), (DDR2_ODT_75ohm | NB_ODT_150ohm), + 0x0f, ((Rank0_ODT << 6) | (Rank0_ODT << 4) | (Rank2_ODT << 2) | Rank2_ODT), (DDR2_ODT_75ohm | NB_ODT_150ohm), +}; + +static const u8 DQS_DQ_TBL[] = { +/* RxE0: DRAM Timing DQS */ +/* RxE2: DRAM Timing DQ */ +/* RxE0, RxE2 */ + 0xee, 0xba, + 0xee, 0xba, + 0xcc, 0xba, + 0xcc, 0xba, +}; + +static const u8 Duty_Control_DDR2[] = { +/* RxEC, RxED, RxEE, RXEF */ + /* DDRII533 1~2 rank, DDRII400 */ + 0x84, 0x10, 0x00, 0x10, + /* DDRII533 3~4 rank */ + 0x44, 0x10, 0x00, 0x10, +}; + +static const u8 ChA_Clk_Phase_DDR2_Table[] = { +/* Rx91, Rx92, Rx93 */ + /* DDRII533 1 rank */ + 0x04, 0x05, 0x06, + /* DDRII533 2~4 rank */ + 0x04, 0x05, 0x05, + /* DDRII400 */ + 0x02, 0x04, 0x04, +}; + +static const u8 DQ_DQS_Table[] = { +/* REG, VALUE */ +/* DRAM DQ/DQS Output Delay Control */ + 0xdc, 0x65, + 0xdd, 0x01, + 0xde, 0xc0, +/* DRAM DQ/DQS input Capture Control */ + 0x78, 0x83, + 0x79, 0x83, + 0x7a, 0x00, +}; + +static const u8 DQSOChA_DDR2_Driving_Table[] = { +/* Rx70, Rx71 */ + /* DDRII533 1~2 rank */ + 0x00, 0x01, + /* DDRII533 3~4 rank */ + 0x03, 0x00, + /* DDRII400 1~2 rank */ + 0x00, 0x04, + /* DDRII400 3~4 rank */ + 0x00, 0x01, +}; + +/************************************************************************/ +/* Chipset Performance UP and other setting after DRAM Sizing Registers */ +/************************************************************************/ +static const u8 Dram_Table[] = { +/* REG, AND, OR */ + 0x60, 0xff, 0x03, + 0x66, 0xcf, 0x80, + 0x68, 0x00, 0x00, + 0x69, 0xfd, 0x03, + 0x6e, 0xff, 0x01, + 0x95, 0xff, 0x40, +}; + +static const u8 Host_Table[] = { +/* REG, AND, OR */ + 0x51, 0x81, 0x7a, + 0x55, 0xff, 0x06, + 0x5e, 0x00, 0x88, + 0x5d, 0xff, 0xb2, +}; + +static const u8 Init_Rank_Reg_Table[] = { + /* Rank Ending Address Registers */ + 0x40, 0x41, 0x42, 0x43, + /* Rank Beginning Address Registers */ + 0x48, 0x49, 0x4a, 0x4b, + /* Physical-to-Virtual Rank Mapping Registers */ + 0x54, 0x55, +}; + +static const u16 DDR2_MRS_table[] = { +/* CL: 2, 3, 4, 5 */ + 0x150, 0x1d0, 0x250, 0x2d0, /* BL=4 ;Use 1X-bandwidth MA table to init DRAM */ + 0x158, 0x1d8, 0x258, 0x2d8, /* BL=8 ;Use 1X-bandwidth MA table to init DRAM */ +}; + +#define MRS_DDR2_TWR2 ((0 << 15) | (0 << 20) | (1 << 12)) +#define MRS_DDR2_TWR3 ((0 << 15) | (1 << 20) | (0 << 12)) +#define MRS_DDR2_TWR4 ((0 << 15) | (1 << 20) | (1 << 12)) +#define MRS_DDR2_TWR5 ((1 << 15) | (0 << 20) | (0 << 12)) +static const u32 DDR2_Twr_table[] = { + MRS_DDR2_TWR2, + MRS_DDR2_TWR3, + MRS_DDR2_TWR4, + MRS_DDR2_TWR5, +}; + +static const u8 DQSI_Rate_Table[] = { + 8, /* DDRII 200 */ + 8, /* DDRII 266 */ + 8, /* DDRII 333 */ + 7, /* DDRII 400 */ + 8, /* DDRII 533 */ + 8, /* DDRII 666 */ +}; + +static const u8 REFC_Table[] = { + 0x65, 0x32, /* DDRII 100 */ + 0x86, 0x43, /* DDRII 266 */ + 0xa8, 0x54, /* DDRII 333 */ + 0xca, 0x65, /* DDRII 400 */ + 0xca, 0x86, /* DDRII 533 */ + 0xca, 0xa8, /* DDRII 666 */ +}; static void do_ram_command(const struct mem_controller *ctrl, u8 command) { |