summaryrefslogtreecommitdiff
path: root/src/northbridge
diff options
context:
space:
mode:
Diffstat (limited to 'src/northbridge')
-rw-r--r--src/northbridge/intel/855pm/855pm.h0
-rw-r--r--src/northbridge/intel/855pm/Config.lb4
-rw-r--r--src/northbridge/intel/855pm/chip.h5
-rw-r--r--src/northbridge/intel/855pm/debug.c164
-rw-r--r--src/northbridge/intel/855pm/northbridge.c119
-rw-r--r--src/northbridge/intel/855pm/raminit.c2091
-rw-r--r--src/northbridge/intel/855pm/raminit.h11
-rw-r--r--src/northbridge/intel/855pm/reset_test.c18
8 files changed, 0 insertions, 2412 deletions
diff --git a/src/northbridge/intel/855pm/855pm.h b/src/northbridge/intel/855pm/855pm.h
deleted file mode 100644
index e69de29bb2..0000000000
--- a/src/northbridge/intel/855pm/855pm.h
+++ /dev/null
diff --git a/src/northbridge/intel/855pm/Config.lb b/src/northbridge/intel/855pm/Config.lb
deleted file mode 100644
index f101a921fd..0000000000
--- a/src/northbridge/intel/855pm/Config.lb
+++ /dev/null
@@ -1,4 +0,0 @@
-config chip.h
-object northbridge.o
-#driver misc_control.o
-
diff --git a/src/northbridge/intel/855pm/chip.h b/src/northbridge/intel/855pm/chip.h
deleted file mode 100644
index d68c782f24..0000000000
--- a/src/northbridge/intel/855pm/chip.h
+++ /dev/null
@@ -1,5 +0,0 @@
-struct northbridge_intel_855pm_config
-{
-};
-
-extern struct chip_operations northbridge_intel_855pm_control;
diff --git a/src/northbridge/intel/855pm/debug.c b/src/northbridge/intel/855pm/debug.c
deleted file mode 100644
index 67670f9844..0000000000
--- a/src/northbridge/intel/855pm/debug.c
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- * generic K8 debug code, used by mainboard specific auto.c
- *
- */
-#if 1
-static void print_debug_pci_dev(unsigned dev)
-{
- print_debug("PCI: ");
- print_debug_hex8((dev >> 16) & 0xff);
- print_debug_char(':');
- print_debug_hex8((dev >> 11) & 0x1f);
- print_debug_char('.');
- print_debug_hex8((dev >> 8) & 7);
-}
-
-static void print_pci_devices(void)
-{
- device_t dev;
- for(dev = PCI_DEV(0, 0, 0);
- dev <= PCI_DEV(0, 0x1f, 0x7);
- dev += PCI_DEV(0,0,1)) {
- uint32_t id;
- id = pci_read_config32(dev, PCI_VENDOR_ID);
- if (((id & 0xffff) == 0x0000) || ((id & 0xffff) == 0xffff) ||
- (((id >> 16) & 0xffff) == 0xffff) ||
- (((id >> 16) & 0xffff) == 0x0000)) {
- continue;
- }
- print_debug_pci_dev(dev);
- print_debug("\r\n");
- }
-}
-
-static void dump_pci_device(unsigned dev)
-{
- int i;
- print_debug_pci_dev(dev);
- print_debug("\r\n");
-
- for(i = 0; i <= 255; i++) {
- unsigned char val;
- if ((i & 0x0f) == 0) {
- print_debug_hex8(i);
- print_debug_char(':');
- }
- val = pci_read_config8(dev, i);
- print_debug_char(' ');
- print_debug_hex8(val);
- if ((i & 0x0f) == 0x0f) {
- print_debug("\r\n");
- }
- }
-}
-
-static void dump_pci_devices(void)
-{
- device_t dev;
- for(dev = PCI_DEV(0, 0, 0);
- dev <= PCI_DEV(0, 0x1f, 0x7);
- dev += PCI_DEV(0,0,1)) {
- uint32_t id;
- id = pci_read_config32(dev, PCI_VENDOR_ID);
- if (((id & 0xffff) == 0x0000) || ((id & 0xffff) == 0xffff) ||
- (((id >> 16) & 0xffff) == 0xffff) ||
- (((id >> 16) & 0xffff) == 0x0000)) {
- continue;
- }
- dump_pci_device(dev);
- }
-}
-
-static void dump_spd_registers(const struct mem_controller *ctrl)
-{
- int i;
- print_debug("\r\n");
- for(i = 0; i < 4; i++) {
- unsigned device;
- device = ctrl->channel0[i];
- if (device) {
- int j;
- print_debug("dimm: ");
- print_debug_hex8(i);
- print_debug(".0: ");
- print_debug_hex8(device);
- for(j = 0; j < 256; j++) {
- int status;
- unsigned char byte;
- if ((j & 0xf) == 0) {
- print_debug("\r\n");
- print_debug_hex8(j);
- print_debug(": ");
- }
- status = smbus_read_byte(device, j);
- if (status < 0) {
- print_debug("bad device\r\n");
- break;
- }
- byte = status & 0xff;
- print_debug_hex8(byte);
- print_debug_char(' ');
- }
- print_debug("\r\n");
- }
-#if 0
- device = ctrl->channel1[i];
- if (device) {
- int j;
- print_debug("dimm: ");
- print_debug_hex8(i);
- print_debug(".1: ");
- print_debug_hex8(device);
- for(j = 0; j < 256; j++) {
- int status;
- unsigned char byte;
- if ((j & 0xf) == 0) {
- print_debug("\r\n");
- print_debug_hex8(j);
- print_debug(": ");
- }
- status = smbus_read_byte(device, j);
- if (status < 0) {
- print_debug("bad device\r\n");
- break;
- }
- byte = status & 0xff;
- print_debug_hex8(byte);
- print_debug_char(' ');
- }
- print_debug("\r\n");
- }
-#endif
- }
-}
-static void dump_smbus_registers(void)
-{
- int i;
- print_debug("\r\n");
- for(i = 1; i < 0x80; i++) {
- unsigned device;
- device = i;
- int j;
- print_debug("smbus: ");
- print_debug_hex8(device);
- for(j = 0; j < 256; j++) {
- int status;
- unsigned char byte;
- if ((j & 0xf) == 0) {
- print_debug("\r\n");
- print_debug_hex8(j);
- print_debug(": ");
- }
- status = smbus_read_byte(device, j);
- if (status < 0) {
- print_debug("bad device\r\n");
- break;
- }
- byte = status & 0xff;
- print_debug_hex8(byte);
- print_debug_char(' ');
- }
- print_debug("\r\n");
- }
-}
-#endif
diff --git a/src/northbridge/intel/855pm/northbridge.c b/src/northbridge/intel/855pm/northbridge.c
deleted file mode 100644
index 20bc17fea1..0000000000
--- a/src/northbridge/intel/855pm/northbridge.c
+++ /dev/null
@@ -1,119 +0,0 @@
-#include <console/console.h>
-#include <arch/io.h>
-#include <stdint.h>
-#include <mem.h>
-#include <part/sizeram.h>
-#include <device/device.h>
-#include <device/pci.h>
-#include <stdlib.h>
-#include <string.h>
-#include <bitops.h>
-#include "chip.h"
-
-struct mem_range *sizeram(void)
-{
- static struct mem_range mem[4];
- /* the units of tolm are 64 KB */
- /* the units of drb16 are 64 MB */
- uint16_t tolm, remapbase, remaplimit, drb16;
- uint16_t tolm_r, remapbase_r, remaplimit_r;
- uint8_t drb;
- int remap_high;
- device_t dev;
-
- dev = dev_find_slot(0, 0); // d0f0
- if (!dev) {
- printk_err("Cannot find PCI: 0:0\n");
- return 0;
- }
-
- /* Calculate and report the top of low memory and
- * any remapping.
- */
- /* Test if the remap memory high option is set */
- remap_high = 0;
-// if(get_option(&remap_high, "remap_memory_high")){
-// remap_high = 0;
-// }
- printk_debug("remap_high is %d\n", remap_high);
- /* get out the value of the highest DRB. This tells the end of
- * physical memory. The units are ticks of 64 MB i.e. 1 means
- * 64 MB.
- */
- drb = pci_read_config8(dev, 0x67);
- drb16 = (uint16_t)drb;
- if(remap_high && (drb16 > 0x08)) {
- /* We only come here if we have at least 512MB of memory,
- * so it is safe to hard code tolm.
- * 0x2000 means 512MB
- */
-
- tolm = 0x2000;
- /* i.e 0x40 * 0x40 is 0x1000 which is 4 GB */
- if(drb16 > 0x0040) {
- /* There is more than 4GB of memory put
- * the remap window at the end of ram.
- */
- remapbase = drb16;
- remaplimit = remapbase + 0x38;
- }
- else {
- remapbase = 0x0040;
- remaplimit = remapbase + (drb16-8);
- }
- }
- else {
- tolm = (uint16_t)((dev_root.resource[1].base >> 16)&0x0f800);
- if((tolm>>8) >= (drb16<<2)) {
- tolm = (drb16<<10);
- remapbase = 0x3ff;
- remaplimit = 0;
- }
- else {
- remapbase = drb16;
- remaplimit = remapbase + ((0x0040-(tolm>>10))-1);
- }
- }
- /* Write the ram configruation registers,
- * preserving the reserved bits.
- */
- tolm_r = pci_read_config16(dev, 0xc4);
- tolm |= (tolm_r & 0x7ff);
- pci_write_config16(dev, 0xc4, tolm);
- remapbase_r = pci_read_config16(dev, 0xc6);
- remapbase |= (remapbase_r & 0xfc00);
- pci_write_config16(dev, 0xc6, remapbase);
- remaplimit_r = pci_read_config16(dev, 0xc8);
- remaplimit |= (remaplimit_r & 0xfc00);
- pci_write_config16(dev, 0xc8, remaplimit);
-
-#if 0
- printk_debug("mem info tolm = %x, drb = %x, pci_memory_base = %x, remap = %x-%x\n",tolm,drb,pci_memory_base,remapbase,remaplimit);
-#endif
-
- mem[0].basek = 0;
- mem[0].sizek = 640;
- mem[1].basek = 768;
- /* Convert size in 64K bytes to size in K bytes */
- mem[1].sizek = (tolm << 6) - mem[1].basek;
- mem[2].basek = 0;
- mem[2].sizek = 0;
- if ((drb << 16) > (tolm << 6)) {
- /* We don't need to consider the remap window
- * here because we put it immediately after the
- * rest of ram.
- * All we must do is calculate the amount
- * of unused memory and report it at 4GB.
- */
- mem[2].basek = 4096*1024;
- mem[2].sizek = (drb << 16) - (tolm << 6);
- }
- mem[3].basek = 0;
- mem[3].sizek = 0;
-
- return mem;
-}
-
-struct chip_operations northbridge_intel_855pm_control = {
- .name = "intel 855pm Northbridge",
-};
diff --git a/src/northbridge/intel/855pm/raminit.c b/src/northbridge/intel/855pm/raminit.c
deleted file mode 100644
index eb357f6468..0000000000
--- a/src/northbridge/intel/855pm/raminit.c
+++ /dev/null
@@ -1,2091 +0,0 @@
-
-/* This was originally for the e7500, modified for 855pm
- */
-
-/* converted to C 6/2004 yhlu */
-
-#define DEBUG_RAM_CONFIG 1
-
-#define dumpnorth() dump_pci_device(PCI_DEV(0, 0, 0))
-
-/* DDR DIMM Mode register Definitions */
-
-#define BURST_2 (1<<0)
-#define BURST_4 (2<<0)
-#define BURST_8 (3<<0)
-
-#define BURST_SEQUENTIAL (0<<3)
-#define BURST_INTERLEAVED (1<<3)
-
-#define CAS_2_0 (0x2<<4)
-#define CAS_3_0 (0x3<<4)
-#define CAS_1_5 (0x5<<4)
-#define CAS_2_5 (0x6<<4)
-
-#define MODE_NORM (0 << 7)
-#define MODE_DLL_RESET (2 << 7)
-#define MODE_TEST (1 << 7)
-
-#define BURST_LENGTH BURST_4
-#define BURST_TYPE BURST_INTERLEAVED
-#define CAS_LATENCY CAS_2_0
-//#define CAS_LATENCY CAS_2_5
-//#define CAS_LATENCY CAS_1_5
-
-#define MRS_VALUE (MODE_NORM | CAS_LATENCY | BURST_TYPE | BURST_LENGTH)
-#define EMRS_VALUE 0x000
-
-#define MD_SHIFT 4
-
-#define RAM_COMMAND_NONE 0x0
-#define RAM_COMMAND_NOP 0x1
-#define RAM_COMMAND_PRECHARGE 0x2
-#define RAM_COMMAND_MRS 0x3
-#define RAM_COMMAND_EMRS 0x4
-#define RAM_COMMAND_CBR 0x6
-#define RAM_COMMAND_NORMAL 0x7
-
-
-static inline void do_ram_command (const struct mem_controller *ctrl, uint32_t value) {
- uint32_t dword;
- uint8_t byte;
- int i;
- uint32_t result;
-#if DEBUG_RAM_CONFIG >= 2
- print_debug("P:");
- print_debug_hex8(value);
- print_debug("\r\n");
-#endif
- /* %ecx - initial address to read from */
- /* Compute the offset */
- dword = value >> 16;
- for(i=0;i<8;i++) {
- /* Set the ram command */
- byte = pci_read_config8(ctrl->d0, 0x7c);
- byte &= 0x8f;
- byte |= (uint8_t)(value & 0xff);
- pci_write_config8(ctrl->d0, 0x7c, byte);
-
- /* Assert the command to the memory */
-#if DEBUG_RAM_CONFIG >= 2
- print_debug("R:");
- print_debug_hex32(dword);
- print_debug("\r\n");
-#endif
-
- result = read32(dword);
-
- /* Go to the next base address */
- dword += 0x04000000;
-
- }
-
- /* The command has been sent to all dimms so get out */
-}
-
-
-static inline void RAM_CMD(const struct mem_controller *ctrl, uint32_t command, uint32_t offset) {
- uint32_t value = ((offset) << (MD_SHIFT + 16))|((command << 4) & 0x70) ;
- do_ram_command(ctrl, value);
-}
-
-#define RAM_NOP(ctrl) RAM_CMD(ctrl, RAM_COMMAND_NOP, 0)
-#define RAM_PRECHARGE(ctrl) RAM_CMD(ctrl, RAM_COMMAND_PRECHARGE, 0)
-#define RAM_CBR(ctrl) RAM_CMD(ctrl, RAM_COMMAND_CBR, 0)
-#define RAM_EMRS(ctrl) RAM_CMD(ctrl, RAM_COMMAND_EMRS, EMRS_VALUE)
-
-static const uint8_t ram_cas_latency[] = {
- CAS_2_5, CAS_2_0, CAS_1_5, CAS_2_5
- };
-
-static inline void ram_mrs(const struct mem_controller *ctrl, uint32_t value){
- /* Read the cas latency setting */
- uint8_t byte;
- uint32_t dword;
- byte = pci_read_config8(ctrl->d0, 0x78);
- /* Transform it into the form expected by SDRAM */
- dword = ram_cas_latency[(byte>>4) & 3];
-
- value |= (dword<<(16+MD_SHIFT));
-
- value |= (MODE_NORM | BURST_TYPE | BURST_LENGTH) << (16+MD_SHIFT);
-
- do_ram_command(ctrl, value);
-}
-
-#define RAM_MRS(ctrl, dll_reset) ram_mrs( ctrl, (dll_reset << (8+MD_SHIFT+ 16)) | ((RAM_COMMAND_MRS <<4)& 0x70) )
-
-static void RAM_NORMAL(const struct mem_controller *ctrl) {
- uint8_t byte;
- byte = pci_read_config8(ctrl->d0, 0x7c);
- byte &= 0x8f;
- byte |= (RAM_COMMAND_NORMAL << 4);
- pci_write_config8(ctrl->d0, 0x7c, byte);
-}
-
-static void RAM_RESET_DDR_PTR(const struct mem_controller *ctrl) {
- uint8_t byte;
- byte = pci_read_config8(ctrl->d0, 0x88);
- byte |= (1 << 4 );
- pci_write_config8(ctrl->d0, 0x88, byte);
- byte = pci_read_config8(ctrl->d0, 0x88);
- byte &= ~(1 << 4);
- pci_write_config8(ctrl->d0, 0x88, byte);
-}
-
-static void ENABLE_REFRESH(const struct mem_controller *ctrl)
-{
- uint32_t dword;
- dword = pci_read_config32(ctrl->d0, 0x7c);
- dword |= (1 << 29);
- pci_write_config32(ctrl->d0, 0x7c, dword);
-}
-
- /*
- * Table: constant_register_values
- */
-static const long register_values[] = {
- /* SVID - Subsystem Vendor Identification Register
- * 0x2c - 0x2d
- * [15:00] Subsytem Vendor ID (Indicates system board vendor)
- */
- /* SID - Subsystem Identification Register
- * 0x2e - 0x2f
- * [15:00] Subsystem ID
- */
- 0x2c, 0, (0x15d9 << 0) | (0x3580 << 16),
-
- /* Undocumented
- * 0x80 - 0x80
- * This register has something to do with CAS latencies,
- * possibily this is the real chipset control.
- * At 0x00 CAS latency 1.5 works.
- * At 0x06 CAS latency 2.5 works.
- * At 0x01 CAS latency 2.0 works.
- */
- /* This is still undocumented in e7501, but with different values
- * CAS 2.0 values taken from Intel BIOS settings, others are a guess
- * and may be terribly wrong. Old values preserved as comments until I
- * figure this out for sure.
- * e7501 docs claim that CAS1.5 is unsupported, so it may or may not
- * work at all.
- * Steven James 02/06/2003
- */
-#if CAS_LATENCY == CAS_2_5
-// 0x80, 0xfffffe00, 0x06 /* Intel E7500 recommended */
- 0x80, 0xfffff000, 0x0662, /* from Factory Bios */
-#elif CAS_LATENCY == CAS_2_0
-// 0x80, 0xfffffe00, 0x0d /* values for register 0x80 */
- 0x80, 0xfffff000, 0x0bb1, /* values for register 0x80 */
-#endif
-
- /* Enable periodic memory recalibration */
- 0x88, 0xffffff00, 0x80,
-
- /* FDHC - Fixed DRAM Hole Control
- * 0x58
- * [7:7] Hole_Enable
- * 0 == No memory Hole
- * 1 == Memory Hole from 15MB to 16MB
- * [6:0] Reserved
- *
- * PAM - Programmable Attribute Map
- * 0x59 [1:0] Reserved
- * 0x59 [5:4] 0xF0000 - 0xFFFFF
- * 0x5A [1:0] 0xC0000 - 0xC3FFF
- * 0x5A [5:4] 0xC4000 - 0xC7FFF
- * 0x5B [1:0] 0xC8000 - 0xCBFFF
- * 0x5B [5:4] 0xCC000 - 0xCFFFF
- * 0x5C [1:0] 0xD0000 - 0xD3FFF
- * 0x5C [5:4] 0xD4000 - 0xD7FFF
- * 0x5D [1:0] 0xD8000 - 0xDBFFF
- * 0x5D [5:4] 0xDC000 - 0xDFFFF
- * 0x5E [1:0] 0xE0000 - 0xE3FFF
- * 0x5E [5:4] 0xE4000 - 0xE7FFF
- * 0x5F [1:0] 0xE8000 - 0xEBFFF
- * 0x5F [5:4] 0xEC000 - 0xEFFFF
- * 00 == DRAM Disabled (All Access go to memory mapped I/O space)
- * 01 == Read Only (Reads to DRAM, Writes to memory mapped I/O space)
- * 10 == Write Only (Writes to DRAM, Reads to memory mapped I/O space)
- * 11 == Normal (All Access go to DRAM)
- */
- 0x58, 0xcccccf7f, (0x00 << 0) | (0x30 << 8) | (0x33 << 16) | (0x33 << 24),
- 0x5C, 0xcccccccc, (0x33 << 0) | (0x33 << 8) | (0x33 << 16) | (0x33 << 24),
-
- /* DRB - DRAM Row Boundary Registers
- * 0x60 - 0x6F
- * An array of 8 byte registers, which hold the ending
- * memory address assigned to each pair of DIMMS, in 64MB
- * granularity.
- */
- /* Conservatively say each row has 64MB of ram, we will fix this up later */
- 0x60, 0x00000000, (0x01 << 0) | (0x02 << 8) | (0x03 << 16) | (0x04 << 24),
- 0x64, 0x00000000, (0x05 << 0) | (0x06 << 8) | (0x07 << 16) | (0x08 << 24),
- 0x68, 0xffffffff, 0,
- 0x6C, 0xffffffff, 0,
-
- /* DRA - DRAM Row Attribute Register
- * 0x70 Row 0,1
- * 0x71 Row 2,3
- * 0x72 Row 4,5
- * 0x73 Row 6,7
- * [7:7] Device width for Odd numbered rows
- * 0 == 8 bits wide x8
- * 1 == 4 bits wide x4
- * [6:4] Row Attributes for Odd numbered rows
- * 010 == 8KB
- * 011 == 16KB
- * 100 == 32KB
- * 101 == 64KB
- * Others == Reserved
- * [3:3] Device width for Even numbered rows
- * 0 == 8 bits wide x8
- * 1 == 4 bits wide x4
- * [2:0] Row Attributes for Even numbered rows
- * 010 == 8KB
- * 011 == 16KB
- * 100 == 32KB
- * 101 == 64KB (This page size appears broken)
- * Others == Reserved
- */
- 0x70, 0x00000000,
- (((0<<3)|(0<<0))<< 0) |
- (((0<<3)|(0<<0))<< 4) |
- (((0<<3)|(0<<0))<< 8) |
- (((0<<3)|(0<<0))<<12) |
- (((0<<3)|(0<<0))<<16) |
- (((0<<3)|(0<<0))<<20) |
- (((0<<3)|(0<<0))<<24) |
- (((0<<3)|(0<<0))<<28),
- 0x74, 0xffffffff, 0,
-
- /* DRT - DRAM Time Register
- * 0x78
- * [31:30] Reserved
- * [29:29] Back to Back Write-Read Turn Around
- * 0 == 3 clocks between WR-RD commands
- * 1 == 2 clocks between WR-RD commands
- * [28:28] Back to Back Read-Write Turn Around
- * 0 == 5 clocks between RD-WR commands
- * 1 == 4 clocks between RD-WR commands
- * [27:27] Back to Back Read Turn Around
- * 0 == 4 clocks between RD commands
- * 1 == 3 clocks between RD commands
- * [26:24] Read Delay (tRD)
- * 000 == 7 clocks
- * 001 == 6 clocks
- * 010 == 5 clocks
- * Others == Reserved
- * [23:19] Reserved
- * [18:16] DRAM idle timer
- * 000 == infinite
- * 011 == 16 dram clocks
- * 001 == Datasheet says reserved, but Intel BIOS sets it
- * [15:11] Reserved
- * [10:09] Active to Precharge (tRAS)
- * 00 == 7 clocks
- * 01 == 6 clocks
- * 10 == 5 clocks
- * 11 == Reserved
- * [08:06] Reserved
- * [05:04] Cas Latency (tCL)
- * 00 == 2.5 Clocks
- * 01 == 2.0 Clocks
- * 10 == 1.5 Clocks
- * 11 == Reserved
- * [03:03] Write Ras# to Cas# Delay (tRCD)
- * 0 == 3 DRAM Clocks
- * 1 == 2 DRAM Clocks
- * [02:01] Read RAS# to CAS# Delay (tRCD)
- * 00 == reserved
- * 01 == reserved
- * 10 == 3 DRAM Clocks
- * 11 == 2 DRAM Clocks
- * [00:00] DRAM RAS# to Precharge (tRP)
- * 0 == 3 DRAM Clocks
- * 1 == 2 DRAM Clocks
- */
-#define DRT_CAS_2_5 (0<<4)
-#define DRT_CAS_2_0 (1<<4)
-#define DRT_CAS_1_5 (2<<4)
-#define DRT_CAS_MASK (3<<4)
-
-#if CAS_LATENCY == CAS_2_5
-#define DRT_CL DRT_CAS_2_5
-#elif CAS_LATENCY == CAS_2_0
-#define DRT_CL DRT_CAS_2_0
-#elif CAS_LATENCY == CAS_1_5
-#define DRT_CL DRT_CAS_1_5
-#endif
-
- /* Most aggressive settings possible */
-// 0x78, 0xc0fff8c4, (1<<29)|(1<<28)|(1<<27)|(2<<24)|(2<<9)|DRT_CL|(1<<3)|(1<<1)|(1<<0),
-// 0x78, 0xc0f8f8c0, (1<<29)|(1<<28)|(1<<27)|(1<<24)|(1<<16)|(2<<9)|DRT_CL|(1<<3)|(3<<1)|(1<<0),
- 0x78, 0xc0f8f9c0, (1<<29)|(1<<28)|(1<<27)|(1<<24)|(1<<16)|(2<<9)|DRT_CL|(1<<3)|(3<<1)|(1<<0),
-
- /* FIXME why was I attempting to set a reserved bit? */
- /* 0x0100040f */
-
- /* DRC - DRAM Contoller Mode Register
- * 0x7c
- * [31:30] Reserved
- * [29:29] Initialization Complete
- * 0 == Not Complete
- * 1 == Complete
- * [28:23] Reserved
- * [22:22] Channels
- * 0 == Single channel
- * 1 == Dual Channel
- * [21:20] DRAM Data Integrity Mode
- * 00 == Disabled, no ECC
- * 01 == Reserved
- * 10 == Error checking, using chip-kill, with correction
- * 11 == Reserved
- * [19:18] Reserved
- * Must equal 01
- * [17:17] (Intel Undocumented) should always be set to 1
- * [16:16] Command Per Clock - Address/Control Assertion Rule (CPC)
- * 0 == 2n Rule
- * 1 == 1n rule
- * [15:11] Reserved
- * [10:08] Refresh mode select
- * 000 == Refresh disabled
- * 001 == Refresh interval 15.6 usec
- * 010 == Refresh interval 7.8 usec
- * 011 == Refresh interval 64 usec
- * 111 == Refresh every 64 clocks (fast refresh)
- * [07:07] Reserved
- * [06:04] Mode Select (SMS)
- * 000 == Self Refresh Mode
- * 001 == NOP Command
- * 010 == All Banks Precharge
- * 011 == Mode Register Set
- * 100 == Extended Mode Register Set
- * 101 == Reserved
- * 110 == CBR Refresh
- * 111 == Normal Operation
- * [03:00] Reserved
- */
-// .long 0x7c, 0xffcefcff, (1<<22)|(2 << 20)|(1 << 16)| (0 << 8),
-// .long 0x7c, 0xff8cfcff, (1<<22)|(2 << 20)|(1 << 17)|(1 << 16)| (0 << 8),
-// .long 0x7c, 0xff80fcff, (1<<22)|(2 << 20)|(1 << 18)|(1 << 17)|(1 << 16)| (0 << 8),
- 0x7c, 0xff82fcff, (1<<22)|(2 << 20)|(1 << 18)|(1 << 16)| (0 << 8),
-
-
- /* Another Intel undocumented register */
- 0x88, 0x080007ff, (1<<31)|(1 << 30)|(1<<28)|(0 << 26)|(0x10 << 21)|(10 << 16)|(0x13 << 11),
-
- /* CLOCK_DIS - CK/CK# Disable Register
- * 0x8C
- * [7:4] Reserved
- * [3:3] CK3
- * 0 == Enable
- * 1 == Disable
- * [2:2] CK2
- * 0 == Enable
- * 1 == Disable
- * [1:1] CK1
- * 0 == Enable
- * 1 == Disable
- * [0:0] CK0
- * 0 == Enable
- * 1 == Disable
- */
- 0x8C, 0xfffffff0, 0xf,
-
- /* TOLM - Top of Low Memory Register
- * 0xC4 - 0xC5
- * [15:11] Top of low memory (TOLM)
- * The address below 4GB that should be treated as RAM,
- * on a 128MB granularity.
- * [10:00] Reserved
- */
- /* REMAPBASE - Remap Base Address Regsiter
- * 0xC6 - 0xC7
- * [15:10] Reserved
- * [09:00] Remap Base Address [35:26] 64M aligned
- * Bits [25:0] are assumed to be 0.
- */
- 0xc4, 0xfc0007ff, (0x2000 << 0) | (0x3ff << 16),
- /* REMAPLIMIT - Remap Limit Address Register
- * 0xC8 - 0xC9
- * [15:10] Reserved
- * [09:00] Remap Limit Address [35:26] 64M aligned
- * When remaplimit < remapbase this register is disabled.
- */
- 0xc8, 0xfffffc00, 0,
-
- /* DVNP - Device Not Present Register
- * 0xE0 - 0xE1
- * [15:05] Reserved
- * [04:04] Device 4 Function 1 Present
- * 0 == Present
- * 1 == Absent
- * [03:03] Device 3 Function 1 Present
- * 0 == Present
- * 1 == Absent
- * [02:02] Device 2 Function 1 Present
- * 0 == Present
- * 1 == Absent
- * [01:01] Reserved
- * [00:00] Device 0 Function 1 Present
- * 0 == Present
- * 1 == Absent
- */
- 0xe0, 0xffffffe2, (1<<4)|(1<<3)|(1<<2)|(0<<0),
- 0xd8, 0xffff9fff, 0x00000000,
- 0xf4, 0x3f8ffffd, 0x40300002,
- 0x1050, 0xffffffcf, 0x00000030,
-};
-
-
- /*
- * Routine: ram_set_registers
- * Arguments: none
- * Results: none
- * Trashed: %eax, %ebx, %ecx, %edx, %esi, %eflags
- * Effects: Do basic ram setup that does not depend on serial
- * presence detect information.
- * This sets PCI configuration registers to known good
- * values based on the table:
- * constant_register_values
- * Which are a triple of configuration regiser, mask, and value.
- *
- */
-/* from 1M or 512K */
-#define RCOMP_MMIO 0x100000
-
- /* DDR RECOMP table */
-
-static const long ddr_rcomp_1[] = {
- 0x44332211, 0xc9776655, 0xffffffff, 0xffffffff,
- 0x22111111, 0x55444332, 0xfffca876, 0xffffffff,
-};
-static const long ddr_rcomp_2[] = {
- 0x00000000, 0x76543210, 0xffffeca8, 0xffffffff,
- 0x21000000, 0xa8765432, 0xffffffec, 0xffffffff,
-};
-static const long ddr_rcomp_3[] = {
- 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
- 0x88888888, 0x88888888, 0x88888888, 0x88888888,
-};
-
-#define rcomp_init_str "Setting RCOMP registers.\r\n"
-
-static void write_8dwords(uint32_t src_addr, uint32_t dst_addr) {
- int i;
- uint32_t dword;
- for(i=0;i<8;i++) {
- dword = read32(src_addr);
- write32(dst_addr, dword);
- src_addr+=4;
- dst_addr+=4;
-
- }
-}
-
-//#define SLOW_DOWN_IO inb(0x80);
-#define SLOW_DOWN_IO udelay(40);
-
-static void ram_set_rcomp_regs(const struct mem_controller *ctrl) {
- uint32_t dword;
-#if DEBUG_RAM_CONFIG
- print_debug(rcomp_init_str);
-#endif
-
- /*enable access to the rcomp bar */
- dword = pci_read_config32(ctrl->d0, 0x0f4);
- dword &= ~(1<<31);
- dword |=((1<<30)|1<<22);
- pci_write_config32(ctrl->d0, 0x0f4, dword);
-
-
- /* Set the MMIO address to 512K */
- pci_write_config32(ctrl->d0, 0x14, RCOMP_MMIO);
-
- dword = read32(RCOMP_MMIO + 0x20);
- dword |= (1<<9);
- write32(RCOMP_MMIO + 0x20, dword);
-
-
- /* Begin to write the RCOMP registers */
-
- write8(RCOMP_MMIO + 0x2c, 0xff);
- write32(RCOMP_MMIO + 0x30, 0x01040444);
- write8(RCOMP_MMIO + 0x34, 0x04);
- write32(RCOMP_MMIO + 0x40, 0);
- write16(RCOMP_MMIO + 0x44, 0);
- write16(RCOMP_MMIO + 0x48, 0);
- write16(RCOMP_MMIO + 0x50, 0);
- write_8dwords((uint32_t)ddr_rcomp_1, RCOMP_MMIO + 0x60);
- write_8dwords((uint32_t)ddr_rcomp_2, RCOMP_MMIO + 0x80);
- write_8dwords((uint32_t)ddr_rcomp_2, RCOMP_MMIO + 0xa0);
- write_8dwords((uint32_t)ddr_rcomp_2, RCOMP_MMIO + 0x140);
- write_8dwords((uint32_t)ddr_rcomp_2, RCOMP_MMIO + 0x1c0);
- write_8dwords((uint32_t)ddr_rcomp_3, RCOMP_MMIO + 0x180);
-
-#if 0 /* Print the RCOMP registers */
- movl $RCOMP_MMIO, %ecx
-1: movl %ecx, %eax
- andb $0x0f, %al
- jnz 2f
- CONSOLE_INFO_TX_CHAR($'\r')
- CONSOLE_INFO_TX_CHAR($'\n')
- CONSOLE_INFO_TX_HEX32(%ecx)
- CONSOLE_INFO_TX_CHAR($' ')
- CONSOLE_INFO_TX_CHAR($'-')
- CONSOLE_INFO_TX_CHAR($' ')
-2: movl (%ecx), %eax
- CONSOLE_INFO_TX_HEX32(%eax)
- CONSOLE_INFO_TX_CHAR($' ')
- addl $4, %ecx
- cmpl $(RCOMP_MMIO + 0x1e0), %ecx
- jnz 1b
- CONSOLE_INFO_TX_CHAR($'\r')
- CONSOLE_INFO_TX_CHAR($'\n')
-#endif
-
- dword = read32(RCOMP_MMIO + 0x20);
- dword &= ~(3);
- dword |= 1;
- write32(RCOMP_MMIO + 0x20, dword);
-
- /* Wait 40 usec */
- SLOW_DOWN_IO;
-
- /* unblock updates */
- dword = read32(RCOMP_MMIO + 0x20);
- dword &= ~(1<<9);
- write32(RCOMP_MMIO+0x20, dword);
- dword |= (1<<8);
- write32(RCOMP_MMIO+0x20, dword);
- dword &= ~(1<<8);
- write32(RCOMP_MMIO+0x20, dword);
-
- /* Wait 40 usec */
- SLOW_DOWN_IO;
-
- /*disable access to the rcomp bar */
- dword = pci_read_config32(ctrl->d0, 0x0f4);
- dword &= ~(1<<22);
- pci_write_config32(ctrl->d0, 0x0f4, dword);
-
-}
-
-static void ram_set_d0f0_regs(const struct mem_controller *ctrl) {
-#if DEBUG_RAM_CONFIG
- dumpnorth();
-#endif
- int i;
- int max;
- max = sizeof(register_values)/sizeof(register_values[0]);
- for(i = 0; i < max; i += 3) {
- uint32_t reg;
-#if DEBUG_RAM_CONFIG
- print_debug_hex32(register_values[i]);
- print_debug(" <-");
- print_debug_hex32(register_values[i+2]);
- print_debug("\r\n");
-#endif
- reg = pci_read_config32(ctrl->d0,register_values[i]);
- reg &= register_values[i+1];
- reg |= register_values[i+2] & ~(register_values[i+1]);
- pci_write_config32(ctrl->d0,register_values[i], reg);
-
-
- }
-#if DEBUG_RAM_CONFIG
- dumpnorth();
-#endif
-}
-static void sdram_set_registers(const struct mem_controller *ctrl){
- ram_set_rcomp_regs(ctrl);
- ram_set_d0f0_regs(ctrl);
-}
-
-
- /*
- * Routine: sdram_spd_get_page_size
- * Arguments: %bl SMBUS_MEM_DEVICE
- * Results:
- * %edi log base 2 page size of DIMM side 1 in bits
- * %esi log base 2 page size of DIMM side 2 in bits
- *
- * Preserved: %ebx (except %bh), %ebp
- *
- * Trashed: %eax, %bh, %ecx, %edx, %esp, %eflags
- * Used: %eax, %ebx, %ecx, %edx, %esi, %edi, %esp, %eflags
- *
- * Effects: Uses serial presence detect to set %edi & %esi
- * to the page size of a dimm.
- * Notes:
- * %bl SMBUS_MEM_DEVICE
- * %edi holds the page size for the first side of the DIMM.
- * %esi holds the page size for the second side of the DIMM.
- * memory size is represent as a power of 2.
- *
- * This routine may be worth moving into generic code somewhere.
- */
-struct dimm_page_size {
- unsigned long side1;
- unsigned long side2;
-};
-
-static struct dimm_page_size sdram_spd_get_page_size(unsigned device) {
-
- uint32_t ecx;
- int value;
- struct dimm_page_size pgsz;
-
- pgsz.side1 = 0;
- pgsz.side2 = 0;
-
- value = spd_read_byte(device, 4); /* columns */
- if(value < 0) goto hw_err;
- pgsz.side1 = value & 0xf;
-
- /* Get the module data width and convert it to a power of two */
- value = spd_read_byte(device,7); /* (high byte) */
- if(value < 0) goto hw_err;
- ecx = value & 0xff;
- ecx <<= 8;
-
- value = spd_read_byte(device, 6); /* (low byte) */
- if(value < 0) goto hw_err;
- ecx |= (value & 0xff);
-
- pgsz.side1 += log2(ecx); /* compute cheap log base 2 */
-
- /* side two */
- value = spd_read_byte(device, 5); /* number of physical banks */
- if(value < 0) goto hw_err;
- if(value==1) goto out;
- if(value!=2) goto val_err;
-
- /* Start with the symmetrical case */
- pgsz.side2 = pgsz.side1;
- value = spd_read_byte(device,4); /* columns */
- if(value < 0) goto hw_err;
- if((value & 0xf0)==0 ) goto out;
- pgsz.side2 -=value & 0xf; /* Subtract out columns on side 1 */
- pgsz.side2 +=(value>>4)& 0xf; /* Add in columns on side 2 */
- goto out;
-
- val_err:
- die("Bad SPD value\r\n");
- /* If an hw_error occurs report that I have no memory */
-hw_err:
- pgsz.side1 = 0;
- pgsz.side2 = 0;
-out:
- return pgsz;
-}
-
-
- /*
- * Routine: sdram_spd_get_width
- * Arguments: %bl SMBUS_MEM_DEVICE
- * Results:
- * %edi width of SDRAM chips on DIMM side 1 in bits
- * %esi width of SDRAM chips on DIMM side 2 in bits
- *
- * Preserved: %ebx (except %bh), %ebp
- *
- * Trashed: %eax, %bh, %ecx, %edx, %esp, %eflags
- * Used: %eax, %ebx, %ecx, %edx, %esi, %edi, %esp, %eflags
- *
- * Effects: Uses serial presence detect to set %edi & %esi
- * to the width of a dimm.
- * Notes:
- * %bl SMBUS_MEM_DEVICE
- * %edi holds the width for the first side of the DIMM.
- * %esi holds the width for the second side of the DIMM.
- * memory size is represent as a power of 2.
- *
- * This routine may be worth moving into generic code somewhere.
- */
-struct dimm_width {
- unsigned side1;
- unsigned side2;
-};
-
-static struct dimm_width sdram_spd_get_width(unsigned device) {
- int value;
- struct dimm_width wd;
- uint32_t ecx;
-
- wd.side1 = 0;
- wd.side2 = 0;
-
- value = spd_read_byte(device, 13); /* sdram width */
- if(value < 0 ) goto hw_err;
- ecx = value;
-
- wd.side1 = value & 0x7f;
-
- /* side two */
- value = spd_read_byte(device, 5); /* number of physical banks */
- if(value < 0 ) goto hw_err;
- if(value <=1 ) goto out;
-
- /* Start with the symmetrical case */
- wd.side2 = wd.side1;
-
- if((ecx & 0x80)==0) goto out;
-
- wd.side2 <<=1;
-hw_err:
- wd.side1 = 0;
- wd.side2 = 0;
-
- out:
- return wd;
-}
-
- /*
- * Routine: sdram_spd_get_dimm_size
- * Arguments: %bl SMBUS_MEM_DEVICE
- * Results:
- * %edi log base 2 size of DIMM side 1 in bits
- * %esi log base 2 size of DIMM side 2 in bits
- *
- * Preserved: %ebx (except %bh), %ebp
- *
- * Trashed: %eax, %bh, %ecx, %edx, %esp, %eflags
- * Used: %eax, %ebx, %ecx, %edx, %esi, %edi, %esp, %eflags
- *
- * Effects: Uses serial presence detect to set %edi & %esi
- * the size of a dimm.
- * Notes:
- * %bl SMBUS_MEM_DEVICE
- * %edi holds the memory size for the first side of the DIMM.
- * %esi holds the memory size for the second side of the DIMM.
- * memory size is represent as a power of 2.
- *
- * This routine may be worth moving into generic code somewhere.
- */
-
-struct dimm_size {
- unsigned long side1;
- unsigned long side2;
-};
-
-static struct dimm_size spd_get_dimm_size(unsigned device)
-{
- /* Calculate the log base 2 size of a DIMM in bits */
- struct dimm_size sz;
- int value, low;
- sz.side1 = 0;
- sz.side2 = 0;
-
- /* Note it might be easier to use byte 31 here, it has the DIMM size as
- * a multiple of 4MB. The way we do it now we can size both
- * sides of an assymetric dimm.
- */
- value = spd_read_byte(device, 3); /* rows */
- if (value < 0) goto hw_err;
-// if ((value & 0xf) == 0) goto val_err;
- sz.side1 += value & 0xf;
-
- value = spd_read_byte(device, 4); /* columns */
- if (value < 0) goto hw_err;
-// if ((value & 0xf) == 0) goto val_err;
- sz.side1 += value & 0xf;
-
- value = spd_read_byte(device, 17); /* banks */
- if (value < 0) goto hw_err;
-// if ((value & 0xff) == 0) goto val_err;
- value &=0xff;
- sz.side1 += log2(value);
-
- /* Get the module data width and convert it to a power of two */
- value = spd_read_byte(device, 7); /* (high byte) */
- if (value < 0) goto hw_err;
- value &= 0xff;
- value <<= 8;
-
- low = spd_read_byte(device, 6); /* (low byte) */
- if (low < 0) goto hw_err;
- value |= (low & 0xff);
-// if ((value != 72) && (value != 64)) goto val_err;
- sz.side1 += log2(value);
-
- /* side 2 */
- value = spd_read_byte(device, 5); /* number of physical banks */
- if (value < 0) goto hw_err;
- if (value == 1) goto out;
-// if (value != 2) goto val_err;
-
- /* Start with the symmetrical case */
- sz.side2 = sz.side1;
-
- value = spd_read_byte(device, 3); /* rows */
- if (value < 0) goto hw_err;
- if ((value & 0xf0) == 0) goto out; /* If symmetrical we are done */
- sz.side2 -= (value & 0x0f); /* Subtract out rows on side 1 */
- sz.side2 += ((value >> 4) & 0x0f); /* Add in rows on side 2 */
-
- value = spd_read_byte(device, 4); /* columns */
- if (value < 0) goto hw_err;
-// if ((value & 0xff) == 0) goto val_err;
- sz.side2 -= (value & 0x0f); /* Subtract out columns on side 1 */
- sz.side2 += ((value >> 4) & 0x0f); /* Add in columsn on side 2 */
- goto out;
-
- val_err:
- die("Bad SPD value\r\n");
- /* If an hw_error occurs report that I have no memory */
-hw_err:
- sz.side1 = 0;
- sz.side2 = 0;
- out:
- return sz;
-}
-
-
-
- /*
- * This is a place holder fill this out
- * Routine: spd_set_row_attributes
- * Arguments: %bl SMBUS_MEM_DEVICE
- * Results:
- * %edi log base 2 size of DIMM side 1 in bits
- * %esi log base 2 size of DIMM side 2 in bits
- *
- * Preserved: %ebx (except %bh), %ebp
- *
- * Trashed: %eax, %bh, %ecx, %edx, %esp, %eflags
- * Used: %eax, %ebx, %ecx, %edx, %esi, %edi, %esp, %eflags
- *
- * Effects: Uses serial presence detect to set %edi & %esi
- * the size of a dimm.
- * Notes:
- * %bl SMBUS_MEM_DEVICE
- * %edi holds the memory size for the first side of the DIMM.
- * %esi holds the memory size for the second side of the DIMM.
- * memory size is represent as a power of 2.
- *
- * This routine may be worth moving into generic code somewhere.
- */
-static long spd_set_row_attributes(const struct mem_controller *ctrl, long dimm_mask) {
- int i;
- uint32_t dword=0;
- int value;
-
-
- /* Walk through all dimms and find the interesection of the support
- * for ecc sdram and refresh rates
- */
-
-
- for(i = 0; i < DIMM_SOCKETS; i++) {
- if (!(dimm_mask & (1 << i))) {
- continue;
- }
- /* Test to see if I have ecc sdram */
- struct dimm_page_size sz;
- sz = sdram_spd_get_page_size(ctrl->channel0[i]); /* SDRAM type */
-#if DEBUG_RAM_CONFIG
- print_debug("page size =");
- print_debug_hex32(sz.side1);
- print_debug(" ");
- print_debug_hex32(sz.side2);
- print_debug("\r\n");
-#endif
-
- /* Test to see if the dimm is present */
- if( sz.side1 !=0) {
-
- /* Test for a valid dimm width */
- if((sz.side1 <15) || (sz.side1>18) ) {
- print_err("unsupported page size\r\n");
- }
-
- /* double because I have 2 channels */
- sz.side1++;
-
- /* Convert to the format needed for the DRA register */
- sz.side1-=14;
-
- /* Place in the %ebp the dra place holder */ //i
- dword |= sz.side1<<(i<<3);
-
- /* Test to see if the second side is present */
-
- if( sz.side2 !=0) {
-
- /* Test for a valid dimm width */
- if((sz.side2 <15) || (sz.side2>18) ) {
- print_err("unsupported page size\r\n");
- }
-
- /* double because I have 2 channels */
- sz.side2++;
-
- /* Convert to the format needed for the DRA register */
- sz.side2-=14;
-
- /* Place in the %ebp the dra place holder */ //i
- dword |= sz.side2<<((i<<3) + 4 );
-
- }
- }
-
- /* Now add the SDRAM chip width to the DRA */
- struct dimm_width wd;
- wd = sdram_spd_get_width(ctrl->channel0[i]);
-
-#if DEBUG_RAM_CONFIG
- print_debug("width =");
- print_debug_hex32(wd.side1);
- print_debug(" ");
- print_debug_hex32(wd.side2);
- print_debug("\r\n");
-#endif
-
- if(wd.side1 == 0) continue;
- if(wd.side1 == 4) {
- /* Enable an x4 device */
- dword |= 0x08 << (i<<3);
- }
-
- if(wd.side2 == 0) continue;
- if(wd.side2 == 4) {
- /* Enable an x4 device */
- dword |= 0x08 << ((i<<3 ) + 4);
- }
-
- /* go to the next DIMM */
- }
-
- /* Write the new row attributes register */
- pci_write_config32(ctrl->d0, 0x70, dword);
-
- return dimm_mask;
-
-}
-#if 0
- /*
- * Routine: sdram_read_paired_byte
- * Arguments: %esp return address
- * %bl device on the smbus to read from
- * %bh address on the smbus to read
- * Results:
- * zf clear
- * byte read in %al
- * On Error:
- * zf set
- * %eax trashed
- *
- * Preserved: %ebx, %esi, %edi
- *
- * Trashed: %eax, %ecx, %edx, %ebp, %esp, %eflags
- * Used: %eax, %ebx, %ecx, %edx, %esp, %eflags
- *
- * Effects: Reads two spd bytes from both ram channesl
- * and errors if they are not equal.
- * It then returns the equal result.
- */
-static spd_read_paired_byte () {
- movl %esp, %ebp
- CALLSP(smbus_read_byte)
- setnz %cl
- movb %al, %ch
- addb $(SMBUS_MEM_CHANNEL_OFF), %bl
- CALLSP(smbus_read_byte)
- movb %ch, %ah
- setnz %ch
- subb $(SMBUS_MEM_CHANNEL_OFF), %bl
-
- /* See if dimms on both sides are equally present */
- cmp %cl, %ch
- jne sdram_presence_mismatch
-
- /* Leave if I have no data */
- testb %cl, %cl
- jz spd_verify_byte_out
-
- /* Verify the data is identical */
- cmp %ah, %al
- jne sdram_value_mismatch
-
- /* Clear the zero flag */
- testb %cl, %cl
-spd_verify_byte_out:
- movl %ebp, %esp
- RETSP
-}
-
- /*
- * Routine: spd_verify_dimms
- * Arguments: none
- * Results: none
- * Preserved: none
- * Trashed: %eax, %ebx, %ecx, %edx, %ebp, %esi, %edi, %esp, %eflags
- * Used: %eax, %ebx, %ecx, %edx, %ebp, %esi, %edi, %esp, %eflags
- *
- * Effects:
- * - Verify all interesting spd information
- * matches for both dimm channels.
- * - Additional error checks that can be easily done
- * here are computed as well, so I don't need to
- * worry about them later.
- */
-static spd_verify_dimms() {
- movl $(SMBUS_MEM_DEVICE_START), %ebx
-spd_verify_dimm:
- /* Verify this is DDR SDRAM */
- movb $2, %bh
- CALLSP(spd_read_paired_byte)
- jz spd_verify_next_dimm
- cmpb $7, %al
- jne invalid_dimm_type
-
- /* Verify the row addresses */
- movb $3, %bh
- CALLSP(spd_read_paired_byte)
- jz spd_missing_data
- testb $0x0f, %al
- jz spd_invalid_data
-
- /* Column addresses */
- movb $4, %bh
- CALLSP(spd_read_paired_byte)
- jz spd_missing_data
- testb $0xf, %al
- jz spd_invalid_data
-
- /* Physical Banks */
- movb $5, %bh
- CALLSP(spd_read_paired_byte)
- jz spd_missing_data
- cmp $1, %al
- jb spd_invalid_data
- cmp $2, %al
- ja spd_invalid_data
-
- /* Module Data Width */
- movb $7, %bh
- CALLSP(spd_read_paired_byte)
- jz spd_missing_data
- cmpb $0, %al
- jne spd_invalid_data
-
- movb $6, %bh
- CALLSP(spd_read_paired_byte)
- jz spd_missing_data
- cmpb $64, %al
- je 1f
- cmpb $72, %al
- je 1f
- jmp spd_unsupported_data
-1:
-
- /* Cycle time at highest CAS latency CL=X */
- movb $9, %bh
- CALLSP(spd_read_paired_byte)
- jz spd_missing_data
-
- /* SDRAM type */
- movb $11, %bh
- CALLSP(spd_read_paired_byte)
- jz spd_missing_data
-
- /* Refresh Interval */
- movb $12, %bh
- CALLSP(spd_read_paired_byte)
- jz spd_missing_data
-
- /* SDRAM Width */
- movb $13, %bh
- CALLSP(spd_read_paired_byte)
- jz spd_missing_data
- andb $0x7f, %al
- cmpb $4, %al
- je 1f
- cmpb $8, %al
- je 1f
- jmp spd_unsupported_data
-1:
-
- /* Back-to-Back Random Column Accesses */
- movb $15, %bh
- CALLSP(spd_read_paired_byte)
- jz spd_missing_data
- testb %al, %al
- jz spd_invalid_data
- cmpb $4, %al
- ja spd_unsupported_data
-
- /* Burst Lengths */
- movb $16, %bh
- CALLSP(spd_read_paired_byte)
- jz spd_missing_data
- testb $(1<<2), %al
- jz spd_unsupported_data
-
- /* Logical Banks */
- movb $17, %bh
- CALLSP(spd_read_paired_byte)
- jz spd_missing_data
- testb %al, %al
- jz spd_invalid_data
-
- /* Supported CAS Latencies */
- movb $18, %bh
- CALLSP(spd_read_paired_byte)
- jz spd_missing_data
- testb $(1 << 1), %al /* CL 1.5 */
- jnz 1f
- testb $(1 << 2), %al /* CL 2.0 */
- jnz 1f
- testb $(1 << 3), %al /* CL 2.5 */
- jnz 1f
- jmp spd_unsupported_data
-1:
-
- /* Cycle time at Cas Latency (CLX - 0.5) */
- movb $23, %bh
- CALLSP(spd_read_paired_byte)
- jz spd_missing_data
-
- /* Cycle time at Cas Latency (CLX - 1.0) */
- movb $26, %bh
- CALLSP(spd_read_paired_byte)
- jz spd_missing_data
-
- /* tRP Row precharge time */
- movb $27, %bh
- CALLSP(spd_read_paired_byte)
- jz spd_missing_data
- testb $0xfc, %al
- jz spd_invalid_data
-
-
- /* tRCD RAS to CAS */
- movb $29, %bh
- CALLSP(spd_read_paired_byte)
- jz spd_missing_data
- testb $0xfc, %al
- jz spd_invalid_data
-
- /* tRAS Activate to Precharge */
- movb $30, %bh
- CALLSP(spd_read_paired_byte)
- jz spd_missing_data
- testb %al, %al
- jz spd_invalid_data
-
- /* Module Bank Density */
- movb $31, %bh
- CALLSP(spd_read_paired_byte)
- jz spd_missing_data
- testb $(1<<2), %al /* 16MB */
- jnz spd_unsupported_data
- testb $(1<<3), %al
- jnz spd_unsupported_data /* 32MB */
-
- /* Address and Command Hold Time After Clock */
- movb $33, %bh
- CALLSP(spd_read_paired_byte)
- jz spd_missing_data
-
-spd_verify_next_dimm:
- /* go to the next DIMM */
- addb $(SMBUS_MEM_DEVICE_INC), %bl /* increment the smbus device */
- cmpb $SMBUS_MEM_DEVICE_END, %bl
- jbe spd_verify_dimm
-spd_verify_dimms_out:
- RET_LABEL(spd_verify_dimms)
-}
-#endif
-#define spd_pre_init "Reading SPD data...\r\n"
-#define spd_pre_set "setting based on SPD data...\r\n"
-#define spd_post_init "done\r\n"
-
-
-static const uint32_t refresh_rate_rank[]= {
- /* Refresh rates ordered from most conservative (lowest)
- * to most agressive (highest)
- * disabled 0 -> rank 3
- * 15.6usec 1 -> rank 1
- * 7.8 usec 2 -> rank 0
- * 64usec 3 -> rank 2
- */
- 3, 1, 0, 2 };
-static const uint32_t refresh_rate_index[] = {
- /* Map the spd refresh rates to memory controller settings
- * 15.625us -> 15.6us
- * 3.9us -> err
- * 7.8us -> 7.8us
- * 31.3s -> 15.6us
- * 62.5us -> 15.6us
- * 125us -> 64us
- */
- 1, 0xff, 2, 1, 1, 3
-};
-#define MAX_SPD_REFRESH_RATE 5
-
-static long spd_set_dram_controller_mode (const struct mem_controller *ctrl, long dimm_mask) {
-
- int i;
- uint32_t dword;
- int value;
- uint32_t ecx;
- uint32_t edx;
-
- /* Read the inititial state */
- dword = pci_read_config32(ctrl->d0, 0x7c);
-
-#if 0
- /* Test if ECC cmos option is enabled */
- movb $RTC_BOOT_BYTE, %al
- outb %al, $0x70
- inb $0x71, %al
- testb $(1<<2), %al
- jnz 1f
- /* Clear the ecc enable */
- andl $~(3 << 20), %esi
-1:
-#endif
-
-
- /* Walk through all dimms and find the interesection of the support
- * for ecc sdram and refresh rates
- */
-
-
- for(i = 0; i < DIMM_SOCKETS; i++) {
- if (!(dimm_mask & (1 << i))) {
- continue;
- }
- /* Test to see if I have ecc sdram */
- value = spd_read_byte(ctrl->channel0[i], 11); /* SDRAM type */
- if(value < 0) continue;
- if(value !=2 ) {
- /* Clear the ecc enable */
- dword &= ~(3 << 20);
- }
- value = spd_read_byte(ctrl->channel0[i], 12); /* SDRAM refresh rate */
- if(value < 0 ) continue;
- value &= 0x7f;
- if(value > MAX_SPD_REFRESH_RATE) { print_err("unsupported refresh rate\r\n");}
-// if(value == 0xff) { print_err("unsupported refresh rate\r\n");}
-
- ecx = refresh_rate_index[value];
-
- /* Isolate the old refresh rate setting */
- /* Load the refresh rate ranks */
- edx = refresh_rate_rank[(dword >> 8) & 3]<<8;
- edx |= refresh_rate_rank[ecx] & 0xff;
-
- /* See if the new refresh rate is more conservative than the old
- * refresh rate setting. (Lower ranks are more conservative)
- */
- if((edx & 0xff)< ((edx >> 8) & 0xff) ) {
- /* Clear the old refresh rate */
- dword &= ~(3<<8);
- /* Move in the new refresh rate */
- dword |= (ecx<<8);
- }
-
- value = spd_read_byte(ctrl->channel0[i], 33); /* Address and command hold time after clock */
- if(value < 0) continue;
- if(value >= 0xa0) { /* At 133Mhz this constant should be 0x75 */
- dword &= ~(1<<16); /* Use two clock cyles instead of one */
- }
-
- /* go to the next DIMM */
- }
-
- /* Now write the controller mode */
- pci_write_config32(ctrl->d0, 0x7c, dword);
-
- return dimm_mask;
-
-}
-static long spd_enable_clocks(const struct mem_controller *ctrl, long dimm_mask)
-{
- int i;
- uint32_t dword;
- int value;
-
- /* Read the inititial state */
- dword = pci_read_config32(ctrl->d0, 0x8c);
-#if 0
-# Intel clears top bit here, should we?
-# No the default is on and for normal timming it should be on. Tom Z
- andl $0x7f, %esi
-#endif
-
-
- for(i = 0; i < DIMM_SOCKETS; i++) {
- if (!(dimm_mask & (1 << i))) {
- continue;
- }
- /* Read any spd byte to see if the dimm is present */
- value = spd_read_byte(ctrl->channel0[i], 5); /* Physical Banks */
- if(value < 0) continue;
-
- dword &= ~(1<<i);
- }
-
- pci_write_config32(ctrl->d0, 0x8c, dword);
-
- return dimm_mask;
-}
-
-static const uint16_t cas_latency_80[] = {
- /* For cas latency 2.0 0x01 works and until I see a large test sample
- * I am not prepared to change this value, to the intel recommended value
- * of 0x0d. Eric Biederman
- */
- /* The E7501 requires b1 rather than 01 for CAS2 or memory will be hosed
- * CAS 1.5 is claimed to be unsupported, will try to test that
- * will need to determine correct values for other CAS values
- * (perhaps b5, b1, b6?)
- * Steven James 02/06/2003
- */
-
-//# .byte 0x05, 0x01, 0x06
-//# .byte 0xb5, 0xb1, 0xb6
- 0x0, 0x0bb1, 0x0662 /* RCVEN */
-};
-static const uint16_t cas_latency_80_4dimms[] = {
- 0x0, 0x0bb1, 0x0882
-};
-
-
-static const uint8_t cas_latency_78[] = {
- DRT_CAS_1_5, DRT_CAS_2_0, DRT_CAS_2_5
-};
-
-static long spd_set_cas_latency(const struct mem_controller *ctrl, long dimm_mask) {
- /* Walk through all dimms and find the interesection of the
- * supported cas latencies.
- */
- int i;
- /* Initially allow cas latencies 2.5, 2.0
- * which the chipset supports.
- */
- uint32_t dword = (1<<3)| (1<<2);// esi
- uint32_t edi;
- uint32_t ecx;
- unsigned device;
- int value;
- uint8_t byte;
- uint16_t word;
-
-
- for(i = 0; i < DIMM_SOCKETS; i++) {
- if (!(dimm_mask & (1 << i))) {
- continue;
- }
- value = spd_read_byte(ctrl->channel0[i], 18);
- if(value < 0) continue;
- /* Find the highest supported cas latency */
- ecx = log2(value & 0xff);
- edi = (1<< ecx);
-
- /* Remember the supported cas latencies */
- ecx = (value & 0xff);
-
- /* Verify each cas latency at 133Mhz */
- /* Verify slowest/highest CAS latency */
- value = spd_read_byte(ctrl->channel0[i], 9);
- if(value < 0 ) continue;
- if(value > 0x75 ) {
- /* The bus is too fast so we cannot support this case latency */
- ecx &= ~edi;
- }
-
- /* Verify the highest CAS latency - 0.5 clocks */
- edi >>= 1;
- if(edi != 0) {
- value = spd_read_byte(ctrl->channel0[i], 23);
- if(value < 0 ) continue;
- if(value > 0x75) {
- /* The bus is too fast so we cannot support this cas latency */
- ecx &= ~edi;
- }
- }
-
- /* Verify the highest CAS latency - 1.0 clocks */
- edi >>=1;
- if(edi !=0) {
- value = spd_read_byte(ctrl->channel0[i], 25);
- if(value < 0 ) continue;
- if(value > 0x75) {
- /* The bus is too fast so we cannot support this cas latency */
- ecx &= ~edi;
- }
- }
-
- /* Now find which cas latencies are supported for the bus */
- dword &= ecx;
- /* go to the next DIMM */
- }
-
- /* After all of the arduous calculation setup with the fastest
- * cas latency I can use.
- */
- value = __builtin_bsf(dword); // bsrl = log2 how about bsfl?
- if(value ==0 ) return -1;
- ecx = value -1;
-
- byte = pci_read_config8(ctrl->d0, 0x78);
- byte &= ~(DRT_CAS_MASK);
- byte |= cas_latency_78[ecx];
- pci_write_config8(ctrl->d0,0x78, byte);
-
- /* set master DLL reset */
- dword = pci_read_config32(ctrl->d0, 0x88);
- dword |= (1<<26);
-
- /* the rest of the references are words */
-// ecx<<=1; // don't need shift left, because we already define that in u16 array
- pci_write_config32(ctrl->d0, 0x88, dword);
-
-
- dword &= 0x0c0000ff; /* patch try register 88 is undocumented tnz */
- dword |= 0xd2109800;
-
- pci_write_config32(ctrl->d0, 0x88, dword);
-
- word = pci_read_config16(ctrl->d0, 0x80);
- word &= ~(0x0fff);
- word |= cas_latency_80[ecx];
-
- dword = pci_read_config32(ctrl->d0, 0x70);
-
- if((dword & 0xff) !=0 ) {
- dword >>=8;
- if((dword & 0xff)!=0) {
- dword >>=8;
- if((dword & 0xff)!=0) {
- dword >>= 8;
- if( (dword & 0xff)!=0) {
- word &=~(0x0fff); /* we have dimms in all 4 slots */
- word |=cas_latency_80_4dimms[ecx];
- }
- }
- }
- }
-
- pci_write_config16(ctrl->d0, 0x80, word);
-
- dword = pci_read_config32(ctrl->d0, 0x88); /* reset master DLL reset */
- dword &= ~(1<<26);
- pci_write_config32(ctrl->d0, 0x88, dword);
-
- RAM_RESET_DDR_PTR(ctrl);
-
- return dimm_mask;
-
-}
-
-static long spd_set_dram_timing(const struct mem_controller *ctrl, long dimm_mask) {
- /* Walk through all dimms and find the interesection of the
- * supported dram timings.
- */
-
- int i;
- uint32_t dword;
- int value;
-
- /* Read the inititial state */
- dword = pci_read_config32(ctrl->d0, 0x78);
-#if 0
-# Intel clears top bit here, should we?
-# No the default is on and for normal timming it should be on. Tom Z
- andl $0x7f, %esi
-#endif
-
-
- for(i = 0; i < DIMM_SOCKETS; i++) {
- if (!(dimm_mask & (1 << i))) {
- continue;
- }
- /* Trp */
- value = spd_read_byte(ctrl->channel0[i], 27);
- if(value < 0) continue;
- if(value > (15<<2)) {
- /* At 133Mhz if row precharge time is above than 15ns than we
- * need 3 clocks not 2 clocks.
- */
- dword &= ~(1<<0);
- }
- /* Trcd */
- value = spd_read_byte(ctrl->channel0[i],29);
- if(value < 0 ) continue;
- if(value > (15<<2)) {
- /* At 133Mhz if the Minimum ras to cas delay is about 15ns we
- * need 3 clocks not 2 clocks.
- */
- dword &= ~((1<<3)|(1<<1));
- }
- /* Tras */
- value = spd_read_byte(ctrl->channel0[i],30);
- if(value < 0 ) continue;
- /* Convert tRAS from ns to 133Mhz clock cycles */
- value <<=1; /* mult by 2 to make 7.5 15 */
- value += 15; /* Make certain we round up */
- value --;
- value &= 0xff; /* Clear the upper bits of eax */
- value /= 15;
-
- /* Don't even process small timings */
- if(value >5) {
- uint32_t tmp;
- /* Die if the value is to large */
- if(value>7) {
- die ("unsupported_rcd\r\n");
- }
- /* Convert to clocks - 5 */
- value -=5;
- /* Convert the existing value into clocks - 5 */
- tmp = (~((dword>>9) & 3) - 1) & 3;
- /* See if we need a slower timing */
- if(value > tmp ) {
- /* O.k. put in our slower timing */
- dword &= ~(3<<9);
- dword |= ((~(value + 1)) & 3)<<9 ;
- }
- }
-
- /* Trd */
- /* Set to a 7 clock read delay. This is for 133Mhz
- * with a CAS latency of 2.5 if 2.0 a 6 clock
- * delay is good */
- if( (pci_read_config8(ctrl->d0, 0x78) & 0x30) ==0 ){
- dword &= ~(7<<24); /* CAS latency is 2.5, make 7 clks */
- }
-
- /*
- * Back to Back Read Turn Around
- */
- /* Set to a 3 clock back to back read turn around. This
- * is good for CAS latencys 2.5 and 2.0 */
- dword |= (1<<27);
- /*
- * Back to Back Read-Write Turn Around
- */
- /* Set to a 5 clock back to back read to write turn around.
- * 4 is a good delay if the CAS latency is 2.0 */
- if( ( pci_read_config8(ctrl->d0, 0x78) & (1<<4)) == 0) {
- dword &= ~(1<<28);
- }
- /*
- * Back to Back Write-Read Turn Around
- */
- /* Set to a 2 clock back to back write to read turn around.
- * This is good for 2.5 and 2.0 CAS Latencies. */
- dword |= (1<<29);
- }
-
- pci_write_config32(ctrl->d0, 0x78, dword);
-
- return dimm_mask;
-
-}
-static unsigned int spd_detect_dimms(const struct mem_controller *ctrl)
-{
- unsigned dimm_mask;
- int i;
- dimm_mask = 0;
-#if DEBUG_RAM_CONFIG
- print_debug("spd_detect_dimms:\r\n");
-#endif
- for(i = 0; i < DIMM_SOCKETS; i++) {
- int byte;
- unsigned device;
-#if DEBUG_RAM_CONFIG
- print_debug_hex32(i);
- print_debug("\r\n");
-#endif
- device = ctrl->channel0[i];
- if (device) {
- byte = spd_read_byte(ctrl->channel0[i], 2); /* Type */
- if (byte == 7) {
- dimm_mask |= (1 << i);
- }
- }
-#if 1
- device = ctrl->channel1[i];
- if (device) {
- byte = spd_read_byte(ctrl->channel1[i], 2);
- if (byte == 7) {
- dimm_mask |= (1 << (i + DIMM_SOCKETS));
- }
- }
-#endif
- }
-#if 1
- i = (dimm_mask>>DIMM_SOCKETS);
- if(i != (dimm_mask & ( (1<<DIMM_SOCKETS) - 1) ) ) {
- die("now we only support dual channel\r\n");
- }
-
-#endif
-
- return dimm_mask;
-}
-
-static uint32_t set_dimm_size(const struct mem_controller *ctrl, struct dimm_size sz, uint32_t memsz, unsigned index)
-{
- int i;
- uint32_t base0, base1;
- uint32_t dch;
- uint8_t byte;
-
- /* Double the size if we are using dual channel memory */
-// if (is_dual_channel(ctrl)) {
- /* Since I have 2 identical channels double the sizes */
- sz.side1++ ;
- sz.side2++;
-// }
-
- if (sz.side1 != sz.side2) {
- sz.side2 = 0;
- }
-
- /* Make certain side1 of the dimm is at least 64MB */
- if (sz.side1 >= (25 + 4)) {
- memsz += (1 << (sz.side1 - (25 + 4)) ) ;
- }
- /* Write the size of side 1 of the dimm */
- byte = memsz;
- pci_write_config8(ctrl->d0, 0x60+(index<<1), byte);
-
- /* Make certain side2 of the dimm is at least 64MB */
- if (sz.side2 >= (25 + 4)) {
- memsz += (1 << (sz.side2 - (25 + 4)) ) ;
- }
-
- /* Write the size of side 2 of the dimm */
- byte = memsz;
- pci_write_config8(ctrl->d0, 0x61+(index<<1), byte);
-
- /* now, fill in DRBs where no physical slot exists */
-
- for(i=index+1;i<4;i++) {
- pci_write_config8(ctrl->d0, 0x60+(i<<1),byte);
- pci_write_config8(ctrl->d0, 0x61+(i<<1),byte);
-
- }
-
- return memsz;
-
-}
-/* LAST_DRB_SLOT is a constant for any E7500 board */
-#define LAST_DRB_SLOT 0x67
-
-static long spd_set_ram_size(const struct mem_controller *ctrl, long dimm_mask)
-{
- int i;
- uint32_t memsz=0;
- uint16_t word;
-
- for(i = 0; i < DIMM_SOCKETS; i++) {
- struct dimm_size sz;
- if (!(dimm_mask & (1 << i))) {
- continue;
- }
- sz = spd_get_dimm_size(ctrl->channel0[i]);
-#if DEBUG_RAM_CONFIG
- print_debug("dimm size =");
- print_debug_hex32(sz.side1);
- print_debug(" ");
- print_debug_hex32(sz.side2);
- print_debug("\r\n");
-#endif
-
- if (sz.side1 == 0) {
- return -1; /* Report SPD error */
- }
- memsz = set_dimm_size(ctrl, sz, memsz, i);
- }
- /* For now hardset everything at 128MB boundaries */
- /* %ebp has the ram size in multiples of 64MB */
-// cmpl $0, %ebp /* test if there is no mem - smbus went bad */
-// jz no_memory_bad_smbus
- if(memsz < 0x30) {
- /* I should really adjust all of this in C after I have resources
- * to all of the pcie devices.
- */
-
- /* Round up to 128M granularity */
- memsz++;
- memsz &= 0xfe;
- memsz<<= 10;
- word = memsz;
- pci_write_config16(ctrl->d0, 0xc4, word);
- } else {
-
- /* FIXME will this work with 3.5G of ram? */
- /* Put TOLM at 3G */
- pci_write_config16(ctrl->d0, 0xc4, 0xc000);
- /* Hard code a 1G remap window, right after the ram */
- if(memsz< 0x40){
- word = 0x40; /* Ensure we are over 4G */
- } else {
- word = memsz;
- }
- pci_write_config16(ctrl->d0, 0xc6, word);
- word += 0x10;
- pci_write_config16(ctrl->d0, 0xc8, word);
-
- }
-
- return dimm_mask;
-}
-
-static void sdram_set_spd_registers(const struct mem_controller *ctrl) {
- long dimm_mask;
-#if DEBUG_RAM_CONFIG
- print_debug(spd_pre_init);
-#endif
- //activate_spd_rom(ctrl);
- dimm_mask = spd_detect_dimms(ctrl);
- if (!(dimm_mask & ((1 << DIMM_SOCKETS) - 1))) {
- print_debug("No memory for this controller\n");
- return;
- }
- dimm_mask = spd_enable_clocks(ctrl, dimm_mask);
- if (dimm_mask < 0)
- goto hw_spd_err;
- //spd_verify_dimms(ctrl);
-#if DEBUG_RAM_CONFIG
- print_debug(spd_pre_set);
-#endif
- dimm_mask = spd_set_row_attributes(ctrl,dimm_mask);
- if (dimm_mask < 0)
- goto hw_spd_err;
- dimm_mask = spd_set_dram_controller_mode(ctrl,dimm_mask);
- if (dimm_mask < 0)
- goto hw_spd_err;
- dimm_mask = spd_set_cas_latency(ctrl,dimm_mask);
- if (dimm_mask < 0)
- goto hw_spd_err;
- dimm_mask = spd_set_dram_timing(ctrl,dimm_mask);
- if (dimm_mask < 0)
- goto hw_spd_err;
-#if DEBUG_RAM_CONFIG
- print_debug(spd_post_init);
-#endif
- //moved from dram_post_init
- spd_set_ram_size(ctrl, dimm_mask);
- return;
- hw_spd_err:
- /* Unrecoverable error reading SPD data */
- print_err("SPD error - reset\r\n");
- hard_reset();
- return;
-}
-
-
- /* I have finally seen ram bad enough to cause LinuxBIOS
- * to die in mysterious ways, before booting up far
- * enough to run a memory tester. This code attempts
- * to catch this blatantly bad ram, with a spot check.
- * For most cases you should boot all of the way up
- * and run a memory tester.
- */
- /* Ensure I read/write each stick of bank of memory &&
- * that I do more than 1000 bytes to avoid the northbridge cache.
- * Only 64M of each side of each DIMM is currently mapped,
- * so we can handle > 4GB of ram here.
- */
-#if 0
-#define bank_msg "Bank "
-#define side_msg " Side "
-static void verify_ram() {
- xorl %ecx, %ecx
- /* Check to see if the RAM is present,
- * in the specified bank and side.
- */
-1: movl %ecx, %ebx
- shrl $1, %ebx
- addl $((5<<8) | SMBUS_MEM_DEVICE_START), %ebx
- CALLSP(smbus_read_byte)
- jz 5f
- testl $1, %ecx
- jz 2f
- cmpb $2, %al
- jne 5f
-
- /* Display the bank and side we are spot checking.
- */
-2: CONSOLE_INFO_TX_STRING($bank_msg)
- movl %ecx, %ebx
- shrl $1, %ebx
- incl %ebx
- CONSOLE_INFO_TX_HEX8(%bl)
- CONSOLE_INFO_TX_STRING($side_msg)
- movl %ecx, %ebx
- andl $1, %ebx
- CONSOLE_INFO_TX_HEX8(%bl)
-
- /* Compute the memory address to spot check. */
- movl %ecx, %ebx
- xorl %eax, %eax
-3: testl %ebx, %ebx
- jz 4f
- addl $0x04000000, %eax
- decl %ebx
- jmp 3b
-4:
- /* Spot check 512K of RAM */
- movl %eax, %ebx
- addl $0x0007ffff, %ebx
- CALLSP(spot_check)
-5:
- /* Now find the next bank and side to spot check */
- incl %ecx
- cmpl $((SMBUS_MEM_DEVICE_END - SMBUS_MEM_DEVICE_START)<<1), %ecx
- jb 1b
- RET_LABEL(verify_ram)
-
-}
-#endif
-
-#if 0
-static void ram_postinit(const struct mem_controller *ctrl) {
-#if DEBUG_RAM_CONFIG
- dumpnorth();
-#endif
- /* Include a test to verify that memory is more or less working o.k.
- * This test is to catch programming errors and hardware that is out of
- * spec, not a test to see if the memory dimms are working 100%
- */
-//# CALL_LABEL(verify_ram)
- spd_set_ram_size(ctrl);
-}
-#define FIRST_NORMAL_REFERENCE() CALL_LABEL(ram_postinit)
-
-#define SPECIAL_FINISHUP() CALL_LABEL(dram_finish)
-
-#endif
-
-#define ecc_pre_init "Initializing ECC state...\r\n"
-#define ecc_post_init "ECC state initialized.\r\n"
-static void dram_finish(const struct mem_controller *ctrl)
-{
- uint32_t dword;
- uint8_t byte;
- /* Test to see if ECC support is enabled */
- dword = pci_read_config32(ctrl->d0, 0x7c);
- dword >>=20;
- dword &=3;
- if(dword == 2) {
-
-#if DEBUG_RAM_CONFIG
- print_debug(ecc_pre_init);
-#endif
- /* Initialize ECC bits , use ECC zero mode (new to 7501)*/
- pci_write_config8(ctrl->d0, 0x52, 0x06);
- pci_write_config8(ctrl->d0, 0x52, 0x07);
- do {
- byte = pci_read_config8(ctrl->d0, 0x52);
-
- } while ( (byte & 0x08 ) == 0);
-
- pci_write_config8(ctrl->d0, 0x52, byte & 0xfc);
-#if DEBUG_RAM_CONFIG
- print_debug(ecc_post_init);
-#endif
-
- /* Clear the ECC error bits */
- pci_write_config8(ctrl->d0f1, 0x80, 0x03); /* dev 0, function 1, offset 80 */
- pci_write_config8(ctrl->d0f1, 0x82, 0x03); /* dev 0, function 1, offset 82 */
-
- pci_write_config32(ctrl->d0f1, 0x40, 1<<18); /* clear dev 0, function 1, offset 40; bit 18 by writing a 1 to it */
- pci_write_config32(ctrl->d0f1, 0x44, 1<<18); /* clear dev 0, function 1, offset 44; bit 18 by writing a 1 to it */
-
- pci_write_config8(ctrl->d0, 0x52, 0x0d);
- }
-
- dword = pci_read_config32(ctrl->d0, 0x7c); /* FCS_EN */
- dword |= (1<<17);
- pci_write_config32(ctrl->d0, 0x7c, dword);
-
-
-#if DEBUG_RAM_CONFIG
- dumpnorth();
-#endif
-
-// verify_ram();
-}
-#if 0
-#define ERRFUNC(x, str) mem_err(x, str)
-
-
-ERRFUNC(invalid_dimm_type, "Invalid dimm type")
-ERRFUNC(spd_missing_data, "Missing sdram spd data")
-ERRFUNC(spd_invalid_data, "Invalid sdram spd data")
-ERRFUNC(spd_unsupported_data, "Unsupported sdram spd value")
-ERRFUNC(unsupported_page_size, "Unsupported page size")
-ERRFUNC(sdram_presence_mismatch, "DIMM presence mismatch")
-ERRFUNC(sdram_value_mismatch, "spd data does not match")
-ERRFUNC(unsupported_refresh_rate, "Unsuported spd refresh rate")
-ERRFUNC(inconsistent_cas_latencies, "No cas latency supported by all dimms")
-ERRFUNC(unsupported_rcd, "Unsupported ras to cas delay")
-#undef ERRFUNC
-
-#define mem_err_err "ERROR: "
-#define mem_err_pair " on dimm pair "
-#define mem_err_byte " spd byte "
-static void mem_err {
- movl %ebx, %edi
- CONSOLE_ERR_TX_STRING($mem_err_err)
- CONSOLE_ERR_TX_STRING(%esi)
- CONSOLE_ERR_TX_STRING($mem_err_pair)
- movl %edi, %ebx
- subb $(SMBUS_MEM_DEVICE_START), %bl
- CONSOLE_ERR_TX_HEX8(%bl)
- CONSOLE_ERR_TX_STRING($mem_err_byte)
- movl %edi, %ebx
- CONSOLE_ERR_TX_HEX8(%bh)
- jmp mem_stop
-
-}
-
-#endif
-
-
-#if ASM_CONSOLE_LOGLEVEL > BIOS_DEBUG
-#define ram_enable_1 "Ram Enable 1\r\n"
-#define ram_enable_2 "Ram Enable 2\r\n"
-#define ram_enable_3 "Ram Enable 3\r\n"
-#define ram_enable_4 "Ram Enable 4\r\n"
-#define ram_enable_5 "Ram Enable 5\r\n"
-#define ram_enable_6 "Ram Enable 6\r\n"
-#define ram_enable_7 "Ram Enable 7\r\n"
-#define ram_enable_8 "Ram Enable 8\r\n"
-#define ram_enable_9 "Ram Enable 9\r\n"
-#define ram_enable_10 "Ram Enable 10\r\n"
-#define ram_enable_11 "Ram Enable 11\r\n"
-#endif
-
- /* Estimate that SLOW_DOWN_IO takes about 50&76us*/
- /* delay for 200us */
-
-#define DO_DELAY \
- udelay(200);
-// for(i=0; i<16;i++) { SLOW_DOWN_IO }
-
-
-#define EXTRA_DELAY DO_DELAY
-
-static void sdram_enable(int controllers, const struct mem_controller *ctrl)
-{
- int i;
- /* 1 & 2 Power up and start clocks */
-#if DEBUG_RAM_CONFIG
- print_debug(ram_enable_1);
- print_debug(ram_enable_2);
-#endif
-
- /* A 200us delay is needed */
-
- DO_DELAY
- EXTRA_DELAY
-
- /* 3. Apply NOP */
-#if DEBUG_RAM_CONFIG
- print_debug(ram_enable_3);
-#endif
- RAM_NOP(ctrl);
- EXTRA_DELAY
-
- /* 4 Precharge all */
-#if DEBUG_RAM_CONFIG
- print_debug(ram_enable_4);
-#endif
- RAM_PRECHARGE(ctrl);
- EXTRA_DELAY
-
- /* wait until the all banks idle state... */
- /* 5. Issue EMRS to enable DLL */
-#if DEBUG_RAM_CONFIG
- print_debug(ram_enable_5);
-#endif
- RAM_EMRS(ctrl);
- EXTRA_DELAY
-
- /* 6. Reset DLL */
-#if DEBUG_RAM_CONFIG
- print_debug(ram_enable_6);
-#endif
- RAM_MRS(ctrl,1);
- EXTRA_DELAY
-
- /* Ensure a 200us delay between the DLL reset in step 6 and the final
- * mode register set in step 9.
- * Infineon needs this before any other command is sent to the ram.
- */
- DO_DELAY
- EXTRA_DELAY
-
- /* 7 Precharge all */
-#if DEBUG_RAM_CONFIG
- print_debug(ram_enable_7);
-#endif
- RAM_PRECHARGE(ctrl);
- EXTRA_DELAY
-
- /* 8 Now we need 2 AUTO REFRESH / CBR cycles to be performed */
-#if DEBUG_RAM_CONFIG
- print_debug(ram_enable_8);
-#endif
- RAM_CBR(ctrl);
- EXTRA_DELAY
- RAM_CBR(ctrl);
- EXTRA_DELAY
- /* And for good luck 6 more CBRs */
- RAM_CBR(ctrl);
- EXTRA_DELAY
- RAM_CBR(ctrl);
- EXTRA_DELAY
- RAM_CBR(ctrl);
- EXTRA_DELAY
- RAM_CBR(ctrl);
- EXTRA_DELAY
- RAM_CBR(ctrl);
- EXTRA_DELAY
- RAM_CBR(ctrl);
- EXTRA_DELAY
-
- /* 9 mode register set */
-#if DEBUG_RAM_CONFIG
- print_debug(ram_enable_9);
-#endif
- RAM_MRS(ctrl,0);
- EXTRA_DELAY
-
- /* 10 DDR Receive FIFO RE-Sync */
-#if DEBUG_RAM_CONFIG
- print_debug(ram_enable_10);
-#endif
- RAM_RESET_DDR_PTR(ctrl);
- EXTRA_DELAY
-
- /* 11 normal operation */
-#if DEBUG_RAM_CONFIG
- print_debug(ram_enable_11);
-#endif
- RAM_NORMAL(ctrl);
-
-
- // special from v1
- //FIRST_NORMAL_REFERENCE();
- //spd_set_ram_size(ctrl, 0x03);
-
- /* Finally enable refresh */
- ENABLE_REFRESH(ctrl);
-
- //SPECIAL_FINISHUP();
- dram_finish(ctrl);
-
-}
-
diff --git a/src/northbridge/intel/855pm/raminit.h b/src/northbridge/intel/855pm/raminit.h
deleted file mode 100644
index 6e40683066..0000000000
--- a/src/northbridge/intel/855pm/raminit.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef RAMINIT_H
-#define RAMINIT_H
-
-#define DIMM_SOCKETS 4
-struct mem_controller {
- device_t d0;
- uint16_t channel0[DIMM_SOCKETS];
-};
-
-
-#endif /* RAMINIT_H */
diff --git a/src/northbridge/intel/855pm/reset_test.c b/src/northbridge/intel/855pm/reset_test.c
deleted file mode 100644
index 79a5cdaee1..0000000000
--- a/src/northbridge/intel/855pm/reset_test.c
+++ /dev/null
@@ -1,18 +0,0 @@
-/* Convert to C by yhlu */
-#define MCH_DRC 0x7c
-#define DRC_DONE (1 << 29)
- /* If I have already booted once skip a bunch of initialization */
- /* To see if I have already booted I check to see if memory
- * has been enabled.
- */
-static int bios_reset_detected(void) {
- uint32_t dword;
-
- dword = pci_read_config32(PCI_DEV(0, 0, 0), MCH_DRC);
-
- if( (dword & DRC_DONE) != 0 ) {
- return 1;
- }
-
- return 0;
-}
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 01:10:12 +0000