summaryrefslogtreecommitdiff
path: root/src/northbridge
diff options
context:
space:
mode:
Diffstat (limited to 'src/northbridge')
-rw-r--r--src/northbridge/amd/amdmct/mct/mctecc_d.c2
-rw-r--r--src/northbridge/amd/amdmct/mct/mctmtr_d.c6
-rw-r--r--src/northbridge/amd/amdmct/mct_ddr3/mctecc_d.c2
-rw-r--r--src/northbridge/amd/amdmct/mct_ddr3/mctmtr_d.c6
-rw-r--r--src/northbridge/amd/amdmct/mct_ddr3/mhwlc_d.c48
-rw-r--r--src/northbridge/amd/amdmct/mct_ddr3/mutilc_d.c15
-rw-r--r--src/northbridge/amd/amdmct/mct_ddr3/mwlc_d.h2
7 files changed, 37 insertions, 44 deletions
diff --git a/src/northbridge/amd/amdmct/mct/mctecc_d.c b/src/northbridge/amd/amdmct/mct/mctecc_d.c
index 167088f200..87ac3acf36 100644
--- a/src/northbridge/amd/amdmct/mct/mctecc_d.c
+++ b/src/northbridge/amd/amdmct/mct/mctecc_d.c
@@ -61,7 +61,7 @@ static u8 isDramECCEn_D(struct DCTStatStruc *pDCTstat);
* guarantee that the NB scrubs the entire dram on its node. Do do this, we
* simply sample the scrub ADDR once, for an initial value, then we sample and poll until the polled value of scrub ADDR
* has wrapped around at least once: Scrub ADDRi+1 < Scrub ADDRi. Since we let all
- * Nodes run in parallel, we need to gaurantee that all nodes have wrapped. To do
+ * Nodes run in parallel, we need to guarantee that all nodes have wrapped. To do
* this efficiently, we need only to sample one of the nodes, the node with the
* largest ammount of dram populated is the one which will take the longest amount
* of time (the scrub rate is set to max, the same rate, on all nodes). So,
diff --git a/src/northbridge/amd/amdmct/mct/mctmtr_d.c b/src/northbridge/amd/amdmct/mct/mctmtr_d.c
index 64500f0d58..bc8e944328 100644
--- a/src/northbridge/amd/amdmct/mct/mctmtr_d.c
+++ b/src/northbridge/amd/amdmct/mct/mctmtr_d.c
@@ -38,7 +38,7 @@ void CPUMemTyping_D(struct MCTStatStruc *pMCTstat,
u32 lo, hi;
/* Set temporary top of memory from Node structure data.
- * Adjust temp top of memory down to accomodate 32-bit IO space.
+ * Adjust temp top of memory down to accommodate 32-bit IO space.
* Bottom40bIO=top of memory, right justified 8 bits
* (defines dram versus IO space type)
* Bottom32bIO=sub 4GB top of memory, right justified 8 bits
@@ -151,7 +151,7 @@ static void SetMTRRrange_D(u32 Base, u32 *pLimit, u32 *pMtrrAddr, u16 MtrrType)
* 2. Each range must be naturally aligned (Base is same as size)
*
* There are two code paths: the ascending path and descending path
- * (analogous to bsf and bsr), where the next limit is a funtion of the
+ * (analogous to bsf and bsr), where the next limit is a function of the
* next set bit in a forward or backward sequence of bits (as a function
* of the Limit). We start with the ascending path, to ensure that
* regions are naturally aligned, then we switch to the descending path
@@ -219,7 +219,7 @@ void UMAMemTyping_D(struct MCTStatStruc *pMCTstat, struct DCTStatStruc *pDCTstat
u32 lo, hi;
/*======================================================================
- * Adjust temp top of memory down to accomodate UMA memory start
+ * Adjust temp top of memory down to accommodate UMA memory start
*======================================================================*/
/* Bottom32bIO=sub 4GB top of memory, right justified 8 bits
* (defines dram versus IO space type)
diff --git a/src/northbridge/amd/amdmct/mct_ddr3/mctecc_d.c b/src/northbridge/amd/amdmct/mct_ddr3/mctecc_d.c
index 288093c73b..ca03f4b5ac 100644
--- a/src/northbridge/amd/amdmct/mct_ddr3/mctecc_d.c
+++ b/src/northbridge/amd/amdmct/mct_ddr3/mctecc_d.c
@@ -56,7 +56,7 @@ static u8 isDramECCEn_D(struct DCTStatStruc *pDCTstat);
* guarantee that the NB scrubs the entire dram on its node. Do do this, we
* simply sample the scrub ADDR once, for an initial value, then we sample and poll until the polled value of scrub ADDR
* has wrapped around at least once: Scrub ADDRi+1 < Scrub ADDRi. Since we let all
- * Nodes run in parallel, we need to gaurantee that all nodes have wrapped. To do
+ * Nodes run in parallel, we need to guarantee that all nodes have wrapped. To do
* this efficiently, we need only to sample one of the nodes, the node with the
* largest ammount of dram populated is the one which will take the longest amount
* of time (the scrub rate is set to max, the same rate, on all nodes). So,
diff --git a/src/northbridge/amd/amdmct/mct_ddr3/mctmtr_d.c b/src/northbridge/amd/amdmct/mct_ddr3/mctmtr_d.c
index 947da43ef2..8812dd9bd7 100644
--- a/src/northbridge/amd/amdmct/mct_ddr3/mctmtr_d.c
+++ b/src/northbridge/amd/amdmct/mct_ddr3/mctmtr_d.c
@@ -36,7 +36,7 @@ void CPUMemTyping_D(struct MCTStatStruc *pMCTstat,
u32 lo, hi;
/* Set temporary top of memory from Node structure data.
- * Adjust temp top of memory down to accomodate 32-bit IO space.
+ * Adjust temp top of memory down to accommodate 32-bit IO space.
* Bottom40bIO=top of memory, right justified 8 bits
* (defines dram versus IO space type)
* Bottom32bIO=sub 4GB top of memory, right justified 8 bits
@@ -145,7 +145,7 @@ static void SetMTRRrange_D(u32 Base, u32 *pLimit, u32 *pMtrrAddr, u16 MtrrType)
* 2. Each range must be naturally aligned (Base is same as size)
*
* There are two code paths: the ascending path and descending path
- * (analogous to bsf and bsr), where the next limit is a funtion of the
+ * (analogous to bsf and bsr), where the next limit is a function of the
* next set bit in a forward or backward sequence of bits (as a function
* of the Limit). We start with the ascending path, to ensure that
* regions are naturally aligned, then we switch to the descending path
@@ -213,7 +213,7 @@ void UMAMemTyping_D(struct MCTStatStruc *pMCTstat, struct DCTStatStruc *pDCTstat
u32 lo, hi;
/*======================================================================
- * Adjust temp top of memory down to accomodate UMA memory start
+ * Adjust temp top of memory down to accommodate UMA memory start
*======================================================================*/
/* Bottom32bIO=sub 4GB top of memory, right justified 8 bits
* (defines dram versus IO space type)
diff --git a/src/northbridge/amd/amdmct/mct_ddr3/mhwlc_d.c b/src/northbridge/amd/amdmct/mct_ddr3/mhwlc_d.c
index fdc35e3bfb..d46a4c6199 100644
--- a/src/northbridge/amd/amdmct/mct_ddr3/mhwlc_d.c
+++ b/src/northbridge/amd/amdmct/mct_ddr3/mhwlc_d.c
@@ -91,7 +91,7 @@ void AgesaHwWlPhase1(sMCTStruct *pMCTData, sDCTStruct *pDCTData,
DRAM_ADD_DCT_PHY_CONTROL_REG, WrtLvTrEn, WrtLvTrEn, 1);
else
{
- /* Broadcast write to all D3Dbyte chiplet register offset 0xc
+ /* Broadcast write to all D3Dbyte chipset register offset 0xc
* Set bit 0 (wrTrain)
* Program bit 4 to nibble being trained (only matters for x4dimms)
* retain value of 3:2 (Trdimmsel)
@@ -114,7 +114,7 @@ void AgesaHwWlPhase1(sMCTStruct *pMCTData, sDCTStruct *pDCTData,
AmdMemPCIReadBits(MAKE_SBDFO(0,0,24+(pDCTData->NodeId),FUN_DCT,Addl_Data_Port), 31, 0, &Value);
Value = bitTestSet(Value, 0); /* enable WL training */
Value = bitTestReset(Value, 4); /* for x8 only */
- Value = bitTestReset(Value, 5); /* for harward WL training */
+ Value = bitTestReset(Value, 5); /* for hardware WL training */
AmdMemPCIWriteBits(MAKE_SBDFO(0,0,24+(pDCTData->NodeId),FUN_DCT,Addl_Data_Port), 31, 0, &Value);
Addr=0x4D030F0C;
AmdMemPCIWriteBits(MAKE_SBDFO(0,0,24+(pDCTData->NodeId),FUN_DCT,Addl_Data_Offset), 31, 0, &Addr);
@@ -172,7 +172,7 @@ void AgesaHwWlPhase1(sMCTStruct *pMCTData, sDCTStruct *pDCTData,
* Parameters:
* IN OUT *DCTData - Pointer to buffer with information about each DCT
* IN u32: MRS value
- * OUT u32: sWAPPED BANK BITS
+ * OUT u32: Swapped BANK BITS
*
* ----------------------------------------------------------------------------
*/
@@ -208,7 +208,7 @@ u32 swapAddrBits_wl(sDCTStruct *pDCTData, u32 MRSValue)
* Parameters:
* IN OUT *DCTData - Pointer to buffer with information about each DCT
* IN u32: MRS value
- * OUT u32: sWAPPED BANK BITS
+ * OUT u32: Swapped BANK BITS
*
* ----------------------------------------------------------------------------
*/
@@ -262,7 +262,7 @@ void prepareDimms(sMCTStruct *pMCTData, sDCTStruct *pDCTData, u8 dimm, BOOL wl)
MemClkFreq = get_Bits(pDCTData, pDCTData->CurrDct, pDCTData->NodeId,
FUN_DCT, DRAM_CONFIG_HIGH, 0, 2);
/* Configure the DCT to send initialization MR commands to the target DIMM
- * ;by programming the F2x[1,0]7C register using the following steps.
+ * by programming the F2x[1,0]7C register using the following steps.
*/
rank = 0;
while ((rank < pDCTData->DimmRanks[dimm]) && (rank < 2))
@@ -271,14 +271,14 @@ void prepareDimms(sMCTStruct *pMCTData, sDCTStruct *pDCTData, u8 dimm, BOOL wl)
set_Bits(pDCTData, pDCTData->CurrDct, pDCTData->NodeId, FUN_DCT,
DRAM_INIT, MrsChipSelStart, MrsChipSelEnd, dimm*2+rank);
/* Program F2x[1, 0]7C[MrsBank[2:0]] for the appropriate internal DRAM
- * ;register that defines the required DDR3-defined function for write
- * ; levelization.
+ * register that defines the required DDR3-defined function for write
+ * levelization.
*/
MrsBank = swapBankBits(pDCTData,1);
set_Bits(pDCTData, pDCTData->CurrDct, pDCTData->NodeId, FUN_DCT,
DRAM_INIT, MrsBankStart, MrsBankEnd, MrsBank);
/* Program F2x[1, 0]7C[MrsAddress[15:0]] to the required DDR3-defined function
- * ; for write levelization.
+ * for write levelization.
*/
tempW = 0;/* DLL_DIS = 0, DIC = 0, AL = 0, TDQS = 0 */
@@ -347,7 +347,7 @@ void prepareDimms(sMCTStruct *pMCTData, sDCTStruct *pDCTData, u8 dimm, BOOL wl)
tempW1 = bitTestSet(tempW, MRS_Level);
if (rank == 0)
{
- /* ?Enable the output driver of the first rank of the target DIMM. */
+ /* Enable the output driver of the first rank of the target DIMM. */
tempW = tempW1;
}
else
@@ -371,7 +371,7 @@ void prepareDimms(sMCTStruct *pMCTData, sDCTStruct *pDCTData, u8 dimm, BOOL wl)
set_Bits(pDCTData, pDCTData->CurrDct, pDCTData->NodeId, FUN_DCT,
DRAM_INIT, MrsAddressStart, MrsAddressEnd, tempW);
/* Program F2x[1, 0]7C[SendMrsCmd]=1 to initiate the command to
- * ;the specified DIMM.
+ * the specified DIMM.
*/
set_Bits(pDCTData, pDCTData->CurrDct, pDCTData->NodeId, FUN_DCT,
DRAM_INIT, SendMrsCmd, SendMrsCmd, 1);
@@ -381,13 +381,13 @@ void prepareDimms(sMCTStruct *pMCTData, sDCTStruct *pDCTData, u8 dimm, BOOL wl)
{
}
/* Program F2x[1, 0]7C[MrsBank[2:0]] for the appropriate internal DRAM
- * ;register that defines the required DDR3-defined function for Rtt_WR.
+ * register that defines the required DDR3-defined function for Rtt_WR.
*/
MrsBank = swapBankBits(pDCTData,2);
set_Bits(pDCTData, pDCTData->CurrDct, pDCTData->NodeId, FUN_DCT,
DRAM_INIT, MrsBankStart, MrsBankEnd, MrsBank);
/* Program F2x[1, 0]7C[MrsAddress[15:0]] to the required DDR3-defined function
- * ; for Rtt_WR (DRAMTermDyn).
+ * for Rtt_WR (DRAMTermDyn).
*/
tempW = 0;/* PASR = 0,*/
/* program MrsAddress[7,6,5:3]=SRT,ASR,CWL,
@@ -457,19 +457,19 @@ void prepareDimms(sMCTStruct *pMCTData, sDCTStruct *pDCTData, u8 dimm, BOOL wl)
{
/* Program F2x[1, 0]7C[MrsChipSel[2:0]] for the current rank
- * ;to be trained.
+ * to be trained.
*/
set_Bits(pDCTData, pDCTData->CurrDct, pDCTData->NodeId,
FUN_DCT, DRAM_INIT, MrsChipSelStart, MrsChipSelEnd, currDimm*2+rank);
/* Program F2x[1, 0]7C[MrsBank[2:0]] for the appropriate internal
- * ;DRAM register that defines the required DDR3-defined function
- * ; for write levelization.
+ * DRAM register that defines the required DDR3-defined function
+ * for write levelization.
*/
MrsBank = swapBankBits(pDCTData,1);
set_Bits(pDCTData, pDCTData->CurrDct, pDCTData->NodeId,
FUN_DCT, DRAM_INIT, MrsBankStart, MrsBankEnd, MrsBank);
/* Program F2x[1, 0]7C[MrsAddress[15:0]] to the required
- * ;DDR3-defined function for write levelization.
+ * DDR3-defined function for write levelization.
*/
tempW = 0;/* DLL_DIS = 0, DIC = 0, AL = 0, TDQS = 0, Level=0, Qoff=0 */
@@ -528,7 +528,7 @@ void prepareDimms(sMCTStruct *pMCTData, sDCTStruct *pDCTData, u8 dimm, BOOL wl)
set_Bits(pDCTData, pDCTData->CurrDct, pDCTData->NodeId,
FUN_DCT, DRAM_INIT, MrsAddressStart, MrsAddressEnd, tempW);
/* Program F2x[1, 0]7C[SendMrsCmd]=1 to initiate the command
- * ; to the specified DIMM.
+ * to the specified DIMM.
*/
set_Bits(pDCTData, pDCTData->CurrDct, pDCTData->NodeId,
FUN_DCT, DRAM_INIT, SendMrsCmd, SendMrsCmd, 1);
@@ -537,13 +537,13 @@ void prepareDimms(sMCTStruct *pMCTData, sDCTStruct *pDCTData, u8 dimm, BOOL wl)
pDCTData->NodeId, FUN_DCT, DRAM_INIT,
SendMrsCmd, SendMrsCmd)) == 1);
/* Program F2x[1, 0]7C[MrsBank[2:0]] for the appropriate internal DRAM
- * ;register that defines the required DDR3-defined function for Rtt_WR.
+ * register that defines the required DDR3-defined function for Rtt_WR.
*/
MrsBank = swapBankBits(pDCTData,2);
set_Bits(pDCTData, pDCTData->CurrDct, pDCTData->NodeId, FUN_DCT,
DRAM_INIT, MrsBankStart, MrsBankEnd, MrsBank);
/* Program F2x[1, 0]7C[MrsAddress[15:0]] to the required DDR3-defined function
- * ; for Rtt_WR (DRAMTermDyn).
+ * for Rtt_WR (DRAMTermDyn).
*/
tempW = 0;/* PASR = 0,*/
/* program MrsAddress[7,6,5:3]=SRT,ASR,CWL,
@@ -651,7 +651,7 @@ void procConifg(sMCTStruct *pMCTData,sDCTStruct *pDCTData, u8 dimm, u8 pass)
u16 Addl_Data_Offset, Addl_Data_Port;
/* Program F2x[1, 0]9C_x08[WrLvOdt[3:0]] to the proper ODT settings for the
- * ;current memory subsystem configuration.
+ * current memory subsystem configuration.
*/
programODT(pMCTData, pDCTData, dimm);
@@ -711,12 +711,12 @@ void procConifg(sMCTStruct *pMCTData,sDCTStruct *pDCTData, u8 dimm, u8 pass)
while(ByteLane < MAX_BYTE_LANES)
{
/* Program an initialization value to registers F2x[1, 0]9C_x[51:50] and
- * ;F2x[1, 0]9C_x52 to set the gross and fine delay for all the byte lane fields
- * ; If the target frequency is different than 400MHz, BIOS must
+ * F2x[1, 0]9C_x52 to set the gross and fine delay for all the byte lane fields
+ * If the target frequency is different than 400MHz, BIOS must
* execute two training passes for each DIMM.
* For pass 1 at a 400MHz MEMCLK frequency, use an initial total delay value
- * ; of 01Fh. This represents a 1UI (UI=.5MEMCLK) delay and is determined
- * ;by design.
+ * of 01Fh. This represents a 1UI (UI=.5MEMCLK) delay and is determined
+ * by design.
*/
pDCTData->WLGrossDelay[MAX_BYTE_LANES*dimm+ByteLane] = Seed_Gross;
pDCTData->WLFineDelay[MAX_BYTE_LANES*dimm+ByteLane] = Seed_Fine;
diff --git a/src/northbridge/amd/amdmct/mct_ddr3/mutilc_d.c b/src/northbridge/amd/amdmct/mct_ddr3/mutilc_d.c
index b153eef71e..c921e3dcf1 100644
--- a/src/northbridge/amd/amdmct/mct_ddr3/mutilc_d.c
+++ b/src/northbridge/amd/amdmct/mct_ddr3/mutilc_d.c
@@ -64,7 +64,6 @@ static void AmdMemPCIWriteBits(SBDFO loc, u8 highbit, u8 lowbit, u32 *pValue)
}
/*-----------------------------------------------------------------------------
- * uint 32
* u32 bitTestSet(u32 csMask,u32 tempD)
*
* Description:
@@ -86,7 +85,6 @@ static u32 bitTestSet(u32 csMask,u32 tempD)
}
/*-----------------------------------------------------------------------------
- * uint 32
* u32 bitTestReset(u32 csMask,u32 tempD)
*
* Description:
@@ -110,12 +108,11 @@ static u32 bitTestReset(u32 csMask,u32 tempD)
}
/*-----------------------------------------------------------------------------
- * uint 32
* u32 get_Bits(DCTStruct *DCTData, u8 DCT, u8 Node, u8 func, u16 offset,
* u8 low, u8 high)
*
* Description:
- * This routine Gets the PCT bits from the specidfied Node, DCT and PCI address
+ * This routine Gets the PCT bits from the specified Node, DCT and PCI address
*
* Parameters:
* IN OUT *DCTData - Pointer to buffer with information about each DCT
@@ -161,12 +158,11 @@ static u32 get_Bits(sDCTStruct *pDCTData,
}
/*-----------------------------------------------------------------------------
- * uint 32
* void set_Bits(DCTStruct *DCTData,u8 DCT,u8 Node,u8 func, u16 offset,
* u8 low, u8 high, u32 value)
*
* Description:
- * This routine Sets the PCT bits from the specidfied Node, DCT and PCI address
+ * This routine Sets the PCT bits from the specified Node, DCT and PCI address
*
* Parameters:
* IN OUT *DCTData - Pointer to buffer with information about each DCT
@@ -212,12 +208,11 @@ static void set_Bits(sDCTStruct *pDCTData,
}
/*-------------------------------------------------
- * uint 32
* u32 get_ADD_DCT_Bits(DCTStruct *DCTData,u8 DCT,u8 Node,u8 func,
* u16 offset,u8 low, u8 high)
*
* Description:
- * This routine gets the Additional PCT register from Function 2 by specidfied
+ * This routine gets the Additional PCT register from Function 2 by specified
* Node, DCT and PCI address
*
* Parameters:
@@ -251,12 +246,11 @@ static u32 get_ADD_DCT_Bits(sDCTStruct *pDCTData,
}
/*-------------------------------------------------
- * uint 32
* void set_DCT_ADDR_Bits(DCTStruct *DCTData, u8 DCT,u8 Node,u8 func,
* u16 offset,u8 low, u8 high, u32 value)
*
* Description:
- * This routine sets the Additional PCT register from Function 2 by specidfied
+ * This routine sets the Additional PCT register from Function 2 by specified
* Node, DCT and PCI address
*
* Parameters:
@@ -297,7 +291,6 @@ static void set_DCT_ADDR_Bits(sDCTStruct *pDCTData,
}
/*-------------------------------------------------
- * uint 32
* BOOL bitTest(u32 value, u8 bitLoc)
*
* Description:
diff --git a/src/northbridge/amd/amdmct/mct_ddr3/mwlc_d.h b/src/northbridge/amd/amdmct/mct_ddr3/mwlc_d.h
index 9b20699224..993bd69690 100644
--- a/src/northbridge/amd/amdmct/mct_ddr3/mwlc_d.h
+++ b/src/northbridge/amd/amdmct/mct_ddr3/mwlc_d.h
@@ -23,7 +23,7 @@
#define MAX_TOTAL_DIMMS 8 /* Maximum Number of DIMMs in systems */
/* (DCT0 + DCT1) */
#define MAX_DIMMS 4 /* Maximum Number of DIMMs on each DCT */
-#define MAX_LDIMMS 4 /* Maximum number of Logial DIMMs per DCT */
+#define MAX_LDIMMS 4 /* Maximum number of Logical DIMMs per DCT */
/*MCT Max variables */
#define MAX_ERRORS 32 /* Maximum number of Errors Reported */