summaryrefslogtreecommitdiff
path: root/src/northbridge
diff options
context:
space:
mode:
Diffstat (limited to 'src/northbridge')
-rw-r--r--src/northbridge/intel/Kconfig1
-rw-r--r--src/northbridge/intel/Makefile.inc1
-rw-r--r--src/northbridge/intel/i5000/Kconfig26
-rw-r--r--src/northbridge/intel/i5000/Makefile.inc21
-rw-r--r--src/northbridge/intel/i5000/chip.h23
-rw-r--r--src/northbridge/intel/i5000/northbridge.c188
-rw-r--r--src/northbridge/intel/i5000/raminit.c1770
-rw-r--r--src/northbridge/intel/i5000/raminit.h337
-rw-r--r--src/northbridge/intel/i5000/udelay.c84
9 files changed, 2451 insertions, 0 deletions
diff --git a/src/northbridge/intel/Kconfig b/src/northbridge/intel/Kconfig
index 1809d113d1..31afe6a16a 100644
--- a/src/northbridge/intel/Kconfig
+++ b/src/northbridge/intel/Kconfig
@@ -10,3 +10,4 @@ source src/northbridge/intel/i82830/Kconfig
source src/northbridge/intel/i855/Kconfig
source src/northbridge/intel/i945/Kconfig
source src/northbridge/intel/sch/Kconfig
+source src/northbridge/intel/i5000/Kconfig
diff --git a/src/northbridge/intel/Makefile.inc b/src/northbridge/intel/Makefile.inc
index 0d116d0755..c599dabf22 100644
--- a/src/northbridge/intel/Makefile.inc
+++ b/src/northbridge/intel/Makefile.inc
@@ -11,3 +11,4 @@ subdirs-$(CONFIG_NORTHBRIDGE_INTEL_I855) += i855
subdirs-$(CONFIG_NORTHBRIDGE_INTEL_I945GC) += i945
subdirs-$(CONFIG_NORTHBRIDGE_INTEL_I945GM) += i945
subdirs-$(CONFIG_NORTHBRIDGE_INTEL_SCH) += sch
+subdirs-$(CONFIG_NORTHBRIDGE_INTEL_I5000) += i5000
diff --git a/src/northbridge/intel/i5000/Kconfig b/src/northbridge/intel/i5000/Kconfig
new file mode 100644
index 0000000000..0595a57638
--- /dev/null
+++ b/src/northbridge/intel/i5000/Kconfig
@@ -0,0 +1,26 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2011 Sven Schnelle <svens@stackframe.org>
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; version 2 of the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+##
+
+config NORTHBRIDGE_INTEL_I5000
+ bool
+ select HAVE_DEBUG_RAM_SETUP
+
+config NORTHBRIDGE_INTEL_I5000_RAM_CHECK
+ bool
+ prompt "Run ramcheck after RAM initialization"
diff --git a/src/northbridge/intel/i5000/Makefile.inc b/src/northbridge/intel/i5000/Makefile.inc
new file mode 100644
index 0000000000..a5623c02bd
--- /dev/null
+++ b/src/northbridge/intel/i5000/Makefile.inc
@@ -0,0 +1,21 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2007-2009 coresystems GmbH
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#
+
+driver-y += northbridge.c
+romstage-y += raminit.c udelay.c
diff --git a/src/northbridge/intel/i5000/chip.h b/src/northbridge/intel/i5000/chip.h
new file mode 100644
index 0000000000..a23be90df7
--- /dev/null
+++ b/src/northbridge/intel/i5000/chip.h
@@ -0,0 +1,23 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Sven Schnelle <svens@stackframe.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+struct northbridge_intel_i5000_config {
+};
+
+extern struct chip_operations northbridge_intel_i5000_ops;
diff --git a/src/northbridge/intel/i5000/northbridge.c b/src/northbridge/intel/i5000/northbridge.c
new file mode 100644
index 0000000000..3db755cb62
--- /dev/null
+++ b/src/northbridge/intel/i5000/northbridge.c
@@ -0,0 +1,188 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Sven Schnelle <svens@stackframe.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <arch/io.h>
+#include <stdint.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <stdlib.h>
+#include <string.h>
+#include <bitops.h>
+#include <cpu/cpu.h>
+#include <boot/tables.h>
+#include <arch/acpi.h>
+#include <cbmem.h>
+#include "chip.h"
+
+static void intel_set_subsystem(device_t dev, unsigned vendor, unsigned device)
+{
+ if (!vendor || !device) {
+ pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
+ pci_read_config32(dev, PCI_VENDOR_ID));
+ } else {
+ pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
+ ((device & 0xffff) << 16) | (vendor & 0xffff));
+ }
+}
+
+static struct pci_operations intel_pci_ops = {
+ .set_subsystem = intel_set_subsystem,
+};
+
+static struct device_operations mc_ops = {
+ .read_resources = pci_dev_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .scan_bus = 0,
+ .ops_pci = &intel_pci_ops,
+};
+
+static const struct pci_driver mc_driver __pci_driver = {
+ .ops = &mc_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x25d8,
+};
+
+static void cpu_bus_init(device_t dev)
+{
+ initialize_cpus(dev->link_list);
+}
+
+static void cpu_bus_noop(device_t dev)
+{
+}
+static struct device_operations cpu_bus_ops = {
+ .read_resources = cpu_bus_noop,
+ .set_resources = cpu_bus_noop,
+ .enable_resources = cpu_bus_noop,
+ .init = cpu_bus_init,
+ .scan_bus = 0,
+};
+
+#if CONFIG_WRITE_HIGH_TABLES
+#include <cbmem.h>
+#endif
+
+static void pci_domain_set_resources(device_t dev)
+{
+ struct resource *resource;
+ uint32_t hecbase, amsize, tolm;
+ uint64_t ambase, memsize;
+ int idx = 0;
+ device_t dev16_0 = dev_find_slot(0, PCI_DEVFN(16, 0));
+ device_t dev16_1 = dev_find_slot(0, PCI_DEVFN(16, 1));
+
+ tolm = pci_read_config16(dev_find_slot(0, PCI_DEVFN(16, 1)), 0x6c) << 16;
+ hecbase = pci_read_config16(dev16_0, 0x64) >> 12;
+ hecbase &= 0xffff;
+
+ ambase = ((u64)pci_read_config32(dev16_0, 0x48) |
+ (u64)pci_read_config32(dev16_0, 0x4c) << 32);
+
+ amsize = pci_read_config32(dev16_0, 0x50);
+ ambase &= 0x000000ffffff0000;
+
+ printk(BIOS_DEBUG, "TOLM: 0x%08x AMBASE: 0x%016llx\n", tolm, ambase);
+
+ /* Report the memory regions */
+ ram_resource(dev, idx++, 0, 640);
+ ram_resource(dev, idx++, 768, ((tolm >> 10) - 768));
+
+ memsize = MAX(pci_read_config16(dev16_1, 0x80) & ~3,
+ pci_read_config16(dev16_1, 0x84) & ~3);
+ memsize = MAX(memsize, pci_read_config16(dev16_1, 0x88) & ~3);
+
+ memsize <<= 24;
+ printk(BIOS_INFO, "MEMSIZE: %08llx\n", memsize);
+ if (memsize > 0xe0000000) {
+ memsize -= 0xe0000000;
+ printk(BIOS_INFO, "high memory: %lldMB\n", memsize / 1048576);
+ ram_resource(dev, idx++, 4096 * 1024, memsize / 1024);
+ }
+
+ if (hecbase) {
+ printk(BIOS_DEBUG, "Adding PCIe config bar at 0x%016llx\n", (u64)hecbase << 28);
+ resource = new_resource(dev, idx++);
+ resource->base = (resource_t)(uint64_t)hecbase << 28;
+ resource->size = (resource_t)256 * 1024 * 1024;
+ resource->flags = IORESOURCE_MEM | IORESOURCE_RESERVE |
+ IORESOURCE_FIXED | IORESOURCE_STORED | IORESOURCE_ASSIGNED;
+ }
+
+ resource = new_resource(dev, idx++);
+ resource->base = (resource_t)(uint64_t)0xffe00000;
+ resource->size = (resource_t)0x200000;
+ resource->flags = IORESOURCE_MEM | IORESOURCE_RESERVE |
+ IORESOURCE_FIXED | IORESOURCE_STORED | IORESOURCE_ASSIGNED;
+
+ if (ambase && amsize) {
+ resource = new_resource(dev, idx++);
+ resource->base = (resource_t)ambase;
+ resource->size = (resource_t)amsize;
+ resource->flags = IORESOURCE_MEM | IORESOURCE_RESERVE |
+ IORESOURCE_FIXED | IORESOURCE_STORED | IORESOURCE_ASSIGNED;
+ }
+
+ /* add resource for 0xfe6xxxxx range. This range is used by i5000 for
+ various fixed address registers (BOFL, SPAD, SPADS */
+ resource = new_resource(dev, idx++);
+ resource->base = (resource_t)0xfe600000;
+ resource->size = (resource_t)0x00100000;
+ resource->flags = IORESOURCE_MEM | IORESOURCE_RESERVE |
+ IORESOURCE_FIXED | IORESOURCE_STORED | IORESOURCE_ASSIGNED;
+
+ assign_resources(dev->link_list);
+
+#if CONFIG_WRITE_HIGH_TABLES
+ /* Leave some space for ACPI, PIRQ and MP tables */
+ high_tables_base = tolm - HIGH_MEMORY_SIZE;
+ high_tables_size = HIGH_MEMORY_SIZE;
+ printk(BIOS_DEBUG, "high_tables_base: %08llx, size %lld\n", high_tables_base, high_tables_size);
+#endif
+}
+
+static struct device_operations pci_domain_ops = {
+ .read_resources = pci_domain_read_resources,
+ .set_resources = pci_domain_set_resources,
+ .enable_resources = NULL,
+ .init = NULL,
+ .scan_bus = pci_domain_scan_bus,
+#if CONFIG_MMCONF_SUPPORT_DEFAULT
+ .ops_pci_bus = &pci_ops_mmconf,
+#else
+ .ops_pci_bus = &pci_cf8_conf1,
+#endif
+};
+
+static void enable_dev(device_t dev)
+{
+ /* Set the operations if it is a special bus type */
+ if (dev->path.type == DEVICE_PATH_PCI_DOMAIN) {
+ dev->ops = &pci_domain_ops;
+ } else if (dev->path.type == DEVICE_PATH_APIC_CLUSTER) {
+ dev->ops = &cpu_bus_ops;
+ }
+}
+
+struct chip_operations northbridge_intel_i5000_ops = {
+ CHIP_NAME("Intel i5000 Northbridge")
+ .enable_dev = enable_dev,
+};
diff --git a/src/northbridge/intel/i5000/raminit.c b/src/northbridge/intel/i5000/raminit.c
new file mode 100644
index 0000000000..95610ce563
--- /dev/null
+++ b/src/northbridge/intel/i5000/raminit.c
@@ -0,0 +1,1770 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Sven Schnelle <svens@stackframe.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include "raminit.h"
+#include <arch/io.h>
+#include <arch/romcc_io.h>
+#include <device/pci_def.h>
+#include <device/pnp_def.h>
+#include <cpu/x86/lapic.h>
+#include <console/console.h>
+#include <spd.h>
+#include <types.h>
+#include <southbridge/intel/i63xx/early_smbus.c>
+#include <string.h>
+#include <cbmem.h>
+#include <stdlib.h>
+#include <lib.h>
+#include <delay.h>
+
+static int i5000_for_each_channel(struct i5000_fbd_branch *branch,
+ int (*cb)(struct i5000_fbd_channel *))
+{
+ struct i5000_fbd_channel *c;
+ int ret;
+
+ for(c = branch->channel; c < branch->channel + I5000_MAX_CHANNEL; c++)
+ if (c->used && (ret = cb(c)))
+ return ret;
+ return 0;
+}
+
+static int i5000_for_each_branch(struct i5000_fbd_setup *setup,
+ int (*cb)(struct i5000_fbd_branch *))
+{
+ struct i5000_fbd_branch *b;
+ int ret;
+
+ for(b = setup->branch; b < setup->branch + I5000_MAX_BRANCH; b++)
+ if (b->used && (ret = cb(b)))
+ return ret;
+ return 0;
+}
+
+static int i5000_for_each_dimm(struct i5000_fbd_setup *setup,
+ int (*cb)(struct i5000_fbdimm *))
+{
+ struct i5000_fbdimm *d;
+ int ret, i;
+
+ for(i = 0; i < I5000_MAX_DIMMS; i++) {
+ d = setup->dimms[i];
+ if ((ret = cb(d))) {
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static int i5000_for_each_dimm_present(struct i5000_fbd_setup *setup,
+ int (*cb)(struct i5000_fbdimm *))
+{
+ struct i5000_fbdimm *d;
+ int ret, i;
+
+ for(i = 0; i < I5000_MAX_DIMMS; i++) {
+ d = setup->dimms[i];
+ if (d->present && (ret = cb(d)))
+ return ret;
+ }
+ return 0;
+}
+
+static int spd_read_byte(struct i5000_fbdimm *d, u8 addr, int count, u8 *out)
+{
+ u16 status;
+ device_t dev = d->branch->branchdev;
+
+ int cmdreg = d->channel->num ? I5000_SPDCMD1 : I5000_SPDCMD0;
+ int stsreg = d->channel->num ? I5000_SPD1 : I5000_SPD0;
+
+ while(count-- > 0) {
+ pci_write_config32(dev, cmdreg, 0xa8000000 | \
+ (d->num & 0x03) << 24 | addr++ << 16);
+
+ int timeout = 1000;
+ while((status = pci_read_config16(dev, stsreg)) & I5000_SPD_BUSY && timeout--)
+ udelay(10);
+
+ if (status & I5000_SPD_SBE || !timeout)
+ return -1;
+
+ if (status & I5000_SPD_RDO) {
+ *out = status & 0xff;
+ out++;
+ }
+ }
+ return 0;
+}
+
+static void i5000_clear_fbd_errors(void)
+{
+ device_t dev16_1, dev16_2;
+
+ dev16_1 = PCI_ADDR(0, 16, 1, 0);
+ dev16_2 = PCI_ADDR(0, 16, 2, 0);
+
+ pci_mmio_write_config32(dev16_1, I5000_EMASK_FBD,
+ pci_mmio_read_config32(dev16_1, I5000_EMASK_FBD));
+
+ pci_mmio_write_config32(dev16_1, I5000_NERR_FAT_FBD,
+ pci_mmio_read_config32(dev16_1, I5000_NERR_FAT_FBD));
+
+ pci_mmio_write_config32(dev16_1, I5000_FERR_FAT_FBD,
+ pci_mmio_read_config32(dev16_1, I5000_FERR_FAT_FBD));
+
+ pci_mmio_write_config32(dev16_1, I5000_NERR_NF_FBD,
+ pci_mmio_read_config32(dev16_1, I5000_NERR_NF_FBD));
+
+ pci_mmio_write_config32(dev16_1, I5000_FERR_NF_FBD,
+ pci_mmio_read_config32(dev16_1, I5000_FERR_NF_FBD));
+
+ pci_mmio_write_config32(dev16_2, I5000_FERR_GLOBAL,
+ pci_mmio_read_config32(dev16_2, I5000_FERR_GLOBAL));
+
+ pci_mmio_write_config32(dev16_2, I5000_NERR_GLOBAL,
+ pci_mmio_read_config32(dev16_2, I5000_NERR_GLOBAL));
+}
+
+static int i5000_branch_reset(struct i5000_fbd_branch *b)
+{
+ device_t dev = b->branchdev;
+
+ pci_write_config8(dev, I5000_FBDRST, 0x00);
+
+ udelay(5000);
+
+ pci_write_config8(dev, I5000_FBDRST, 0x05);
+ udelay(1);
+ pci_write_config8(dev, I5000_FBDRST, 0x04);
+ udelay(2);
+ pci_write_config8(dev, I5000_FBDRST, 0x05);
+ pci_write_config8(dev, I5000_FBDRST, 0x07);
+ return 0;
+}
+
+static int delay_ns_to_clocks(struct i5000_fbdimm *d, int del)
+{
+ int div;
+
+ switch (d->setup->ddr_speed) {
+ case DDR_533MHZ:
+ div = 375;
+ break;
+
+ default:
+ printk(BIOS_ERR, "Invalid clock: %d, using 667MHz\n",
+ d->setup->ddr_speed);
+
+ case DDR_667MHZ:
+ div = 300;
+ break;
+ }
+
+ return (del * 100) / div;
+}
+
+static int mtb2clks(struct i5000_fbdimm *d, int del)
+{
+ int val, div;
+
+ switch (d->setup->ddr_speed) {
+ case DDR_533MHZ:
+ div = 375;
+ break;
+ default:
+ printk(BIOS_ERR, "Invalid clock: %d, using 667MHz\n",
+ d->setup->ddr_speed);
+
+ case DDR_667MHZ:
+ div = 300;
+ break;
+ }
+
+ val = (del * 1000 * d->mtb_dividend) / (d->mtb_divisor * div);
+ if ((val % 10) > 0)
+ val += 10;
+ return val / 10;
+}
+
+static int i5000_read_spd_data(struct i5000_fbdimm *d)
+{
+ struct i5000_fbd_setup *s = d->setup;
+ u8 addr, val, org, ftb, cas, t_ras_rc_h, t_rtp, t_wtr;
+ u8 bb, bl, t_wr, t_rp, t_rcd, t_rc, t_ras, t_aa_min;
+ u8 cmd2data_addr;
+ int t_ck_min, dimmsize;
+
+ if (spd_read_byte(d, SPD_MEMORY_TYPE, 1, &val)) {
+ printk(BIOS_DEBUG, "DIMM %d/%d/%d not present\n",
+ d->branch->num, d->channel->num, d->num);
+ return 0; // No FBDIMM present
+ }
+
+ if (val != 0x09)
+ return -1; // SDRAM type not FBDIMM
+
+ if (spd_read_byte(d, 0x65, 14, d->amb_personality_bytes))
+ return -1;
+
+ switch(s->ddr_speed) {
+ case DDR_533MHZ:
+ cmd2data_addr = FBDIMM_SPD_CMD2DATA_533;
+ break;
+
+ case DDR_667MHZ:
+ cmd2data_addr = FBDIMM_SPD_CMD2DATA_667;
+ break;
+
+ default:
+ printk(BIOS_ERR, "Unsupported FBDIMM clock\n");
+ return -1;
+ }
+
+ if (spd_read_byte(d, FBDIMM_SPD_SDRAM_ADDRESSING, 1, &addr) ||
+ spd_read_byte(d, FBDIMM_SPD_MODULE_ORGANIZATION, 1, &org) ||
+ spd_read_byte(d, FBDIMM_SPD_FTB, 1, &ftb) ||
+ spd_read_byte(d, FBDIMM_SPD_MTB_DIVIDEND, 1, &d->mtb_dividend) ||
+ spd_read_byte(d, FBDIMM_SPD_MTB_DIVISOR, 1, &d->mtb_divisor) ||
+ spd_read_byte(d, FBDIMM_SPD_MIN_TCK, 1, &d->t_ck_min) ||
+ spd_read_byte(d, FBDIMM_SPD_T_WR, 1, &t_wr) ||
+ spd_read_byte(d, FBDIMM_SPD_T_RCD, 1, &t_rcd) ||
+ spd_read_byte(d, FBDIMM_SPD_T_RRD, 1, &d->t_rrd) ||
+ spd_read_byte(d, FBDIMM_SPD_T_RP, 1, &t_rp) ||
+ spd_read_byte(d, FBDIMM_SPD_T_RAS_RC_MSB, 1, &t_ras_rc_h) ||
+ spd_read_byte(d, FBDIMM_SPD_T_RAS, 1, (u8 *)&t_ras) ||
+ spd_read_byte(d, FBDIMM_SPD_T_RC, 1, (u8 *)&t_rc) ||
+ spd_read_byte(d, FBDIMM_SPD_T_RFC, 2, (u8 *)&d->t_rfc) ||
+ spd_read_byte(d, FBDIMM_SPD_T_WTR, 1, &t_wtr) ||
+ spd_read_byte(d, FBDIMM_SPD_T_RTP, 1, &t_rtp) ||
+ spd_read_byte(d, FBDIMM_SPD_T_BB, 1, &bb) ||
+ spd_read_byte(d, FBDIMM_SPD_BURST_LENGTHS_SUPPORTED, 1, &bl) ||
+ spd_read_byte(d, FBDIMM_SPD_ODT, 1, &d->odt) ||
+ spd_read_byte(d, FBDIMM_SPD_T_REFI, 1, &d->t_refi) ||
+ spd_read_byte(d, FBDIMM_SPD_CAS_LATENCIES, 1, &cas) ||
+ spd_read_byte(d, FBDIMM_SPD_CMD2DATA_533, 1, &d->cmd2datanxt[DDR_533MHZ]) ||
+ spd_read_byte(d, FBDIMM_SPD_CMD2DATA_667, 1, &d->cmd2datanxt[DDR_667MHZ]) ||
+ spd_read_byte(d, FBDIMM_SPD_CAS_MIN_LATENCY, 1, &t_aa_min)) {
+ printk(BIOS_ERR, "failed to read data from SPD\n");
+ return 0;
+ }
+
+
+ t_ck_min = (d->t_ck_min * 100) / d->mtb_divisor;
+ if (t_ck_min <= 300)
+ d->speed = DDR_667MHZ;
+ else if (t_ck_min <= 375)
+ d->speed = DDR_533MHZ;
+ else {
+ printk(BIOS_ERR, "Unsupported t_ck_min: %d\n", t_ck_min);
+ return -1;
+ }
+
+ d->sdram_width = org & 0x07;
+ if (d->sdram_width > 1) {
+ printk(BIOS_ERR, "SDRAM width %d not supported\n", d->sdram_width);
+ return -1;
+ }
+
+ if (s->ddr_speed == DDR_667MHZ && d->speed == DDR_533MHZ)
+ s->ddr_speed = DDR_533MHZ;
+
+ d->banks = 4 << (addr & 0x03);
+ d->columns = 9 + ((addr >> 2) & 0x03);
+ d->rows = 12 + ((addr >> 5) & 0x03);
+ d->ranks = (org >> 3) & 0x03;
+ d->min_cas_latency = cas & 0x0f;
+
+ s->bl &= bl;
+
+ if (!s->bl) {
+ printk(BIOS_ERR, "no compatible burst length found\n");
+ return -1;
+ }
+
+ s->t_rc = MAX(s->t_rc, mtb2clks(d,
+ t_rc | ((t_ras_rc_h & 0xf0) << 4)));
+ s->t_rrd = MAX(s->t_rrd, mtb2clks(d, d->t_rrd));
+ s->t_rfc = MAX(s->t_rfc, mtb2clks(d, d->t_rfc));
+ s->t_rcd = MAX(s->t_rcd, mtb2clks(d, t_rcd));
+ s->t_cl = MAX(s->t_cl, mtb2clks(d, t_aa_min));
+ s->t_wr = MAX(s->t_wr, mtb2clks(d, t_wr));
+ s->t_rp = MAX(s->t_rp, mtb2clks(d, t_rp));
+ s->t_rtp = MAX(s->t_rtp, mtb2clks(d, t_rtp));
+ s->t_wtr = MAX(s->t_wtr, mtb2clks(d, t_wtr));
+ s->t_ras = MAX(s->t_ras, mtb2clks(d,
+ t_ras | ((t_ras_rc_h & 0x0f) << 8)));
+ s->t_r2r = MAX(s->t_r2r, bb & 3);
+ s->t_r2w = MAX(s->t_r2w, (bb >> 4) & 3);
+ s->t_w2r = MAX(s->t_w2r, (bb >> 2) & 3);
+
+ d->ranksize = (1 << (d->banks + d->columns + d->rows + 1)) >> 20;
+ dimmsize = d->ranksize * d->ranks;
+ d->branch->totalmem += dimmsize;
+ s->totalmem += dimmsize;
+
+ d->channel->columns = d->columns;
+ d->channel->rows = d->rows;
+ d->channel->ranks = d->ranks;
+ d->channel->banks = d->banks;
+ d->channel->width = d->sdram_width;
+
+ printk(BIOS_INFO, "DIMM %d/%d/%d %dMB: %d banks, "
+ "%d columns, %d rows, %d ranks\n",
+ d->branch->num, d->channel->num, d->num, dimmsize,
+ d->banks, d->columns, d->rows, d->ranks);
+
+ d->present = 1;
+ d->branch->used |= 1;
+ d->channel->used |= 1;
+ d->channel->highest_amb = d->num;
+ return 0;
+}
+
+static int i5000_amb_smbus_write(struct i5000_fbdimm *d, int byte1, int byte2)
+{
+ u16 status;
+ device_t dev = PCI_DEV(0, d->branch->num ? 22 : 21, 0);
+ int cmdreg = d->channel->num ? I5000_SPDCMD1 : I5000_SPDCMD0;
+ int stsreg = d->channel->num ? I5000_SPD1 : I5000_SPD0;
+ int timeout = 1000;
+
+ pci_write_config32(dev, cmdreg, 0xb8000000 | ((d->num & 0x03) << 24) |
+ (byte1 << 16) | (byte2 << 8) | 1);
+
+ while(((status = pci_read_config16(dev, stsreg)) & I5000_SPD_BUSY) && timeout--)
+ udelay(10);
+
+ if (status & I5000_SPD_WOD && timeout)
+ return 0;
+
+ printk(BIOS_ERR, "SMBus write failed: %d/%d/%d, byte1 %02x, byte2 %02x status %04x\n",
+ d->branch->num, d->channel->num, d->num, byte1, byte2, status);
+ for(;;);
+ return -1;
+}
+
+static int i5000_amb_smbus_read(struct i5000_fbdimm *d, int byte1, u8 *out)
+{
+ u16 status;
+ device_t dev = PCI_DEV(0, d->branch->num ? 22 : 21, 0);
+ int cmdreg = d->channel->num ? I5000_SPDCMD1 : I5000_SPDCMD0;
+ int stsreg = d->channel->num ? I5000_SPD1 : I5000_SPD0;
+ int timeout = 1000;
+
+ pci_write_config32(dev, cmdreg, 0xb8000000 | ((d->num & 0x03) << 24) |
+ (byte1 << 16));
+
+ while(((status = pci_read_config16(dev, stsreg)) & I5000_SPD_BUSY) && timeout--)
+ udelay(10);
+
+ if ((status & I5000_SPD_RDO) && timeout)
+ *out = status & 0xff;
+
+ if (status & I5000_SPD_SBE || !timeout) {
+ printk(BIOS_ERR, "SMBus write failed: %d/%d/%d, byte1 %02x status %04x\n",
+ d->branch->num, d->channel->num, d->num, byte1, status);
+ return -1;
+ }
+ return 0;
+
+}
+
+static int i5000_amb_smbus_write_config8(struct i5000_fbdimm *d,
+ int fn, int reg, u8 val)
+{
+ if (i5000_amb_smbus_write(d, 0x84, 00) ||
+ i5000_amb_smbus_write(d, 0x04, fn) ||
+ i5000_amb_smbus_write(d, 0x04, (reg >> 8) & 0xff) ||
+ i5000_amb_smbus_write(d, 0x04, reg & 0xff) ||
+ i5000_amb_smbus_write(d, 0x44, val)) {
+ printk(BIOS_ERR, "AMB SMBUS write failed\n");
+ return 1;
+ }
+ return 0;
+}
+
+static int i5000_amb_smbus_write_config16(struct i5000_fbdimm *d,
+ int fn, int reg, u16 val)
+{
+ if (i5000_amb_smbus_write(d, 0x88, 00) ||
+ i5000_amb_smbus_write(d, 0x08, fn) ||
+ i5000_amb_smbus_write(d, 0x08, (reg >> 8) & 0xff) ||
+ i5000_amb_smbus_write(d, 0x08, reg & 0xff) ||
+ i5000_amb_smbus_write(d, 0x08, (val >> 8) & 0xff) ||
+ i5000_amb_smbus_write(d, 0x48, val & 0xff)) {
+ printk(BIOS_ERR, "AMB SMBUS write failed\n");
+ return 1;
+ }
+ return 0;
+}
+
+static int i5000_amb_smbus_write_config32(struct i5000_fbdimm *d,
+ int fn, int reg, u32 val)
+{
+ if (i5000_amb_smbus_write(d, 0x8c, 00) ||
+ i5000_amb_smbus_write(d, 0x0c, fn) ||
+ i5000_amb_smbus_write(d, 0x0c, (reg >> 8) & 0xff) ||
+ i5000_amb_smbus_write(d, 0x0c, reg & 0xff) ||
+ i5000_amb_smbus_write(d, 0x0c, (val >> 24) & 0xff) ||
+ i5000_amb_smbus_write(d, 0x0c, (val >> 16) & 0xff) ||
+ i5000_amb_smbus_write(d, 0x0c, (val >> 8) & 0xff) ||
+ i5000_amb_smbus_write(d, 0x4c, val & 0xff)) {
+ printk(BIOS_ERR, "AMB SMBUS write failed\n");
+ return 1;
+ }
+ return 0;
+}
+
+static int i5000_amb_smbus_read_config32(struct i5000_fbdimm *d,
+ int fn, int reg, u32 *val)
+{
+ u8 byte3, byte2, byte1, byte0;
+
+ if (i5000_amb_smbus_write(d, 0x80, 00) ||
+ i5000_amb_smbus_write(d, 0x00, fn) ||
+ i5000_amb_smbus_write(d, 0x00, (reg >> 8) & 0xff) ||
+ i5000_amb_smbus_write(d, 0x40, reg & 0xff) ||
+ i5000_amb_smbus_read(d, 0x80, &byte3) ||
+ i5000_amb_smbus_read(d, 0x00, &byte3) ||
+ i5000_amb_smbus_read(d, 0x00, &byte2) ||
+ i5000_amb_smbus_read(d, 0x00, &byte1) ||
+ i5000_amb_smbus_read(d, 0x40, &byte0)) {
+ printk(BIOS_ERR, "AMB SMBUS read failed\n");
+ return 1;
+ }
+ *val = (byte3 << 24) | (byte2 << 16) | (byte1 << 8) | byte0;
+ return 0;
+}
+
+static void i5000_amb_write_config8(struct i5000_fbdimm *d,
+ int fn, int reg, u32 val)
+{
+ write8(DEFAULT_AMBASE + AMB_ADDR(d->ambase, fn, reg), val);
+}
+
+static void i5000_amb_write_config16(struct i5000_fbdimm *d,
+ int fn, int reg, u32 val)
+{
+ write16(DEFAULT_AMBASE + AMB_ADDR(d->ambase, fn, reg), val);
+}
+
+static void i5000_amb_write_config32(struct i5000_fbdimm *d,
+ int fn, int reg, u32 val)
+{
+ write32(DEFAULT_AMBASE + AMB_ADDR(d->ambase, fn, reg), val);
+}
+
+static u32 i5000_amb_read_config32(struct i5000_fbdimm *d,
+ int fn, int reg)
+{
+ return read32(DEFAULT_AMBASE + AMB_ADDR(d->ambase, fn, reg));
+}
+
+static int ddr_command(struct i5000_fbdimm *d, int rank, u32 addr, u32 command)
+{
+ u32 drc, status;
+
+ printk(BIOS_SPEW, "DIMM %d/%d/%d: rank %d: sending command %x (addr %08x)...",
+ d->branch->num, d->channel->num, d->num, rank, command, addr);
+
+ drc = i5000_amb_read_config32(d, 3, AMB_DRC);
+ drc &= ~((3 << 9) | (1 << 12));
+ drc |= (rank << 9);
+
+ command &= 0x0f;
+ command |= AMB_DCALCSR_START | (rank << 21);
+
+ printk(BIOS_DEBUG, "%s: AMB_DCALADDR: %08x AMB_DCALCSR: %08x\n", __func__, addr, command);
+ i5000_amb_write_config32(d, 3, AMB_DRC, drc);
+ i5000_amb_write_config32(d, 4, AMB_DCALADDR, addr);
+ i5000_amb_write_config32(d, 4, AMB_DCALCSR, command);
+
+ udelay(1000);
+ while((status = (i5000_amb_read_config32(d, 4, AMB_DCALCSR)))
+ & (1 << 31));
+
+ if (status & (1 << 30)) {
+ printk(BIOS_SPEW, "failed (status 0x%08x)\n", status);
+ return -1;
+ }
+
+ printk(BIOS_SPEW, "done\n");
+ return 0;
+}
+
+static int i5000_ddr_calibration(struct i5000_fbdimm *d)
+{
+ u32 status;
+
+ i5000_amb_write_config32(d, 3, AMB_MBADDR, 0);
+ i5000_amb_write_config32(d, 3, AMB_MBCSR, 0x80100050);
+ while((status = i5000_amb_read_config32(d, 3, AMB_MBCSR)) & (1 << 31));
+
+ i5000_amb_write_config32(d, 3, AMB_MBCSR, 0x80200050);
+ while((status = i5000_amb_read_config32(d, 3, AMB_MBCSR)) & (1 << 31));
+
+ if (ddr_command(d, d->ranks == 2 ? 3 : 1, 0, AMB_DCALCSR_OPCODE_RECV_ENABLE_CAL) ||
+ ddr_command(d, d->ranks == 2 ? 3 : 1, 0, AMB_DCALCSR_OPCODE_DQS_DELAY_CAL))
+ return -1;
+ return 0;
+}
+
+static int i5000_ddr_init(struct i5000_fbdimm *d)
+{
+
+ int rank;
+ u32 val;
+ u8 odt;
+
+ for(rank = 0; rank < d->ranks; rank++) {
+ printk(BIOS_DEBUG, "%s: %d/%d/%d rank %d\n", __func__,
+ d->branch->num, d->channel->num, d->num, rank);
+
+ if (ddr_command(d, 1 << rank,
+ 0, AMB_DCALCSR_OPCODE_NOP))
+ return -1;
+
+ if (ddr_command(d, 1 << rank,
+ 0x4000000, AMB_DCALCSR_OPCODE_PRECHARGE))
+ return -1;
+
+ /* EMRS(2) */
+ if (ddr_command(d, 1 << rank,
+ 2, AMB_DCALCSR_OPCODE_MRS_EMRS))
+ return -1;
+
+ /* EMRS(3) */
+ if (ddr_command(d, 1 << rank,
+ 3, AMB_DCALCSR_OPCODE_MRS_EMRS))
+ return -1;
+
+ /* EMRS(1) */
+ if (ddr_command(d, 1 << rank,
+ 1, AMB_DCALCSR_OPCODE_MRS_EMRS))
+ return -1;
+
+ /* MRS: DLL reset */
+ if (ddr_command(d, 1 << rank,
+ 0x1000000, AMB_DCALCSR_OPCODE_MRS_EMRS))
+ return -1;
+
+ udelay(20);
+
+ if (ddr_command(d, 1 << rank,
+ 0x4000000, AMB_DCALCSR_OPCODE_PRECHARGE))
+ return -1;
+
+ if (ddr_command(d, 1 << rank,
+ 0, AMB_DCALCSR_OPCODE_REFRESH))
+ return -1;
+
+ if (ddr_command(d, 1 << rank, 0,
+ AMB_DCALCSR_OPCODE_REFRESH))
+ return -1;
+
+ /* burst length + cas latency */
+ val = (((d->setup->bl & BL_BL8) ? 3 : 2) << 16) |
+ (1 << 19) /* interleaved burst */ |
+ (d->setup->t_cl << 20) |
+ (((d->setup->t_wr - 1) & 7) << 25);
+
+ printk(BIOS_DEBUG, "MRS: 0x%08x\n", val);
+ if (ddr_command(d, 1 << rank,
+ val, AMB_DCALCSR_OPCODE_MRS_EMRS))
+ return -1;
+
+ /* OCD calibration default */
+ if (ddr_command(d, 1 << rank, 0x03800001,
+ AMB_DCALCSR_OPCODE_MRS_EMRS))
+ return -1;
+
+
+ odt = d->odt;
+ if (rank)
+ odt >>= 4;
+
+ val = (d->setup->t_al << 19) |
+ ((odt & 1) << 18) |
+ ((odt & 2) << 21) | 1;
+
+ printk(BIOS_DEBUG, "EMRS(1): 0x%08x\n", val);
+
+ /* ODT, OCD exit, additive latency */
+ if (ddr_command(d, 1 << rank, val, AMB_DCALCSR_OPCODE_MRS_EMRS))
+ return -1;
+ }
+ return 0;
+}
+
+static int i5000_amb_preinit(struct i5000_fbdimm *d)
+{
+ u32 *p32 = (u32 *)d->amb_personality_bytes;
+ u16 *p16 = (u16 *)d->amb_personality_bytes;
+ u32 id, drc, fbdsbcfg = 0x0909;
+
+ printk(BIOS_DEBUG, "%s: %d/%d/%d\n", __func__,
+ d->branch->num, d->channel->num, d->num);
+
+ i5000_amb_smbus_write_config32(d, 1, 0xb0, p32[0]);
+ i5000_amb_smbus_write_config16(d, 1, 0xb4, p16[2]);
+
+ drc = (d->setup->t_al << 4) | (d->setup->t_cl);
+ printk(BIOS_SPEW, "DRC: %02X, CMD2DATANXT: %02x\n", drc,
+ d->cmd2datanxt[d->setup->ddr_speed]);
+
+ switch(d->setup->ddr_speed) {
+ case DDR_533MHZ:
+ fbdsbcfg |= (1 << 16);
+ break;
+ case DDR_667MHZ:
+ fbdsbcfg |= (2 << 16);
+ break;
+ default:
+ return -1;
+ }
+
+ printk(BIOS_DEBUG, "FBDSBCFGNXT: %08x\n", fbdsbcfg);
+ i5000_amb_smbus_write_config32(d, 1, AMB_FBDSBCFGNXT, fbdsbcfg);
+ i5000_amb_smbus_write_config32(d, 1, AMB_FBDLOCKTO, 0x1651);
+ i5000_amb_smbus_write_config8(d, 1, AMB_CMD2DATANXT,
+ d->cmd2datanxt[d->setup->ddr_speed]);
+
+ i5000_amb_smbus_write_config8(d, 3, AMB_DRC, drc);
+
+ if (!i5000_amb_smbus_read_config32(d, 0, 0, &id)) {
+ d->vendor = id & 0xffff;
+ d->device = id >> 16;
+ }
+
+ pci_mmio_write_config8(d->branch->branchdev,
+ d->channel->num ? I5000_FBDSBTXCFG1 : I5000_FBDSBTXCFG0, 0x04);
+ return 0;
+}
+
+static void i5000_fbd_next_state(struct i5000_fbd_branch *b, int state)
+{
+ int timeout = 10000;
+ device_t dev = b->branchdev;
+
+ printk(BIOS_DEBUG, " FBD state branch %d: %02x,", b->num, state);
+
+ pci_mmio_write_config8(dev, I5000_FBDHPC, state);
+
+ printk(BIOS_DEBUG, "waiting for new state...");
+
+ while(pci_mmio_read_config8(dev, I5000_FBDST) != state && timeout--)
+ udelay(10);
+
+ if (timeout) {
+ printk(BIOS_DEBUG, "done\n");
+ return;
+ }
+
+ printk(BIOS_ERR, "timeout while entering state %02x on branch %d\n",
+ state, b->num);
+}
+
+static int i5000_wait_pattern_recognized(struct i5000_fbd_channel *c)
+{
+ int i = 10;
+ device_t dev = PCI_ADDR(0, c->branch->num ? 22 : 21, 0,
+ c->num ? I5000_FBDISTS1 : I5000_FBDISTS0);
+
+ printk(BIOS_DEBUG, " waiting for pattern recognition...");
+ while(pci_mmio_read_config16(dev, 0) != 0x1fff && --i > 0)
+ udelay(5000);
+
+ printk(BIOS_DEBUG, i ? "done\n" : "failed\n");
+ printk(BIOS_DEBUG, "%d/%d Round trip latency: %d\n", c->branch->num, c->num,
+ pci_mmio_read_config8(c->branch->branchdev, c->num ? I5000_FBDLVL1 : I5000_FBDLVL0) & 0x3f);
+ return !i;
+}
+
+static const char *pattern_names[16] = {
+ "EI", "EI", "EI", "EI",
+ "EI", "EI", "EI", "EI",
+ "TS0", "TS1", "TS2", "TS3",
+ "RESERVED", "TS2 (merge disabled)", "TS2 (merge enabled)","All ones",
+};
+
+static int i5000_drive_pattern(struct i5000_fbd_channel *c, int pattern, int wait)
+{
+ device_t dev = PCI_ADDR(0, c->branch->num ? 22 : 21, 0,
+ c->num ? I5000_FBDICMD1 : I5000_FBDICMD0);
+
+ printk(BIOS_DEBUG, " %d/%d driving pattern %s to AMB%d (%02x)\n",
+ c->branch->num, c->num,
+ pattern_names[(pattern >> 4) & 0xf], pattern & 3, pattern);
+ pci_mmio_write_config8(dev, 0, pattern);
+
+ if (!wait)
+ return 0;
+
+ return i5000_wait_pattern_recognized(c);
+}
+
+static int i5000_set_ambpresent(struct i5000_fbd_channel *c)
+{
+ int i;
+ device_t branchdev = c->branch->branchdev;
+ u16 ambpresent = 0x8000;
+
+ for(i = 0; i < I5000_MAX_DIMM_PER_CHANNEL; i++) {
+ if (c->dimm[i].present)
+ ambpresent |= (1 << i);
+ }
+
+ printk(BIOS_DEBUG, "AMBPRESENT: %04x\n", ambpresent);
+ pci_write_config16(branchdev,
+ c->num ?
+ I5000_AMBPRESENT1 : \
+ I5000_AMBPRESENT0, ambpresent);
+
+ return 0;
+}
+
+
+static int i5000_drive_test_patterns(struct i5000_fbd_channel *c, int highest_amb, int mchpad)
+{
+ device_t branchdev = c->branch->branchdev;
+ int off = c->num ? 0x100 : 0;
+ u32 portctl;
+ int i, cnt = 1000;
+
+ portctl = pci_mmio_read_config32(branchdev, I5000_FBD0IBPORTCTL + off);
+ portctl &= ~0x01000020;
+ if (mchpad)
+ portctl |= 0x00800000;
+ else
+ portctl &= ~0x00800000;
+ portctl &= ~0x01000020;
+ pci_mmio_write_config32(branchdev, I5000_FBD0IBPORTCTL + off, portctl);
+
+ /* drive calibration patterns */
+ if (i5000_drive_pattern(c, I5000_FBDICMD_TS0 | highest_amb, 1))
+ return -1;
+
+ if (i5000_drive_pattern(c, I5000_FBDICMD_TS1 | highest_amb, 1))
+ return -1;
+
+ while (!(pci_mmio_read_config32(branchdev, I5000_FBD0IBPORTCTL + off) & 4) && cnt--)
+ udelay(10);
+
+ if (!cnt) {
+ printk(BIOS_ERR, "IBIST timeout\n");
+ return -1;
+ }
+
+ if (i5000_drive_pattern(c, I5000_FBDICMD_TS2 | highest_amb, 1))
+ return -1;
+
+ for(i = 0; i < highest_amb; i++) {
+ if ((i5000_drive_pattern(c, I5000_FBDICMD_TS2_NOMERGE | i, 1)))
+ return -1;
+ }
+
+ if (i5000_drive_pattern(c, I5000_FBDICMD_TS2 | highest_amb, 1))
+ return -1;
+
+ if (i5000_drive_pattern(c, I5000_FBDICMD_TS3 | highest_amb, 1))
+ return -1;
+
+ if (i5000_set_ambpresent(c))
+ return -1;
+ return 0;
+}
+
+static int i5000_train_channel_idle(struct i5000_fbd_channel *c)
+{
+ int i;
+ u32 fbdsbcfg = 0x0b1b;
+
+ switch(c->setup->ddr_speed) {
+ case DDR_533MHZ:
+ fbdsbcfg |= (1 << 16);
+ break;
+ case DDR_667MHZ:
+ fbdsbcfg |= (2 << 16);
+ break;
+ default:
+ return -1;
+ }
+
+ pci_mmio_write_config8(c->branch->branchdev,
+ c->num ? I5000_FBDSBTXCFG1 : I5000_FBDSBTXCFG0, 0x05);
+
+ for(i = 0; i < 4; i++) {
+ if (c->dimm[i].present)
+ i5000_amb_smbus_write_config32(c->dimm + i, 1, AMB_FBDSBCFGNXT, i ? (fbdsbcfg | 0x1000) : fbdsbcfg);
+ }
+
+ return i5000_drive_pattern(c, I5000_FBDICMD_IDLE, 1);
+}
+
+static int i5000_drive_test_patterns0(struct i5000_fbd_channel *c)
+{
+ if (i5000_train_channel_idle(c))
+ return -1;
+
+ return i5000_drive_test_patterns(c, c->highest_amb, 0);
+}
+
+static int i5000_drive_test_patterns1(struct i5000_fbd_channel *c)
+{
+ if (i5000_train_channel_idle(c))
+ return -1;
+
+ return i5000_drive_test_patterns(c, c->highest_amb, 1);
+}
+
+static int i5000_setup_channel(struct i5000_fbd_channel *c)
+{
+ device_t branchdev = c->branch->branchdev;
+ int off = c->branch->num ? 0x100 : 0;
+ u32 val;
+
+ pci_mmio_write_config32(branchdev, I5000_FBD0IBTXPAT2EN + off, 0);
+ pci_mmio_write_config32(branchdev, I5000_FBD0IBTXPAT2EN + off, 0);
+ pci_mmio_write_config32(branchdev, I5000_FBD0IBTXMSK + off, 0x3ff);
+ pci_mmio_write_config32(branchdev, I5000_FBD0IBRXMSK + off, 0x1fff);
+
+ pci_mmio_write_config16(branchdev, off + 0x0162, c->used ? 0x20db : 0x18db);
+
+ /* unknown */
+ val = pci_mmio_read_config32(branchdev, off + 0x0164);
+ val &= 0xfffbcffc;
+ val |= 0x4004;
+ pci_mmio_write_config32(branchdev, off + 0x164, val);
+
+ pci_mmio_write_config32(branchdev, off + 0x15c, 0xff);
+ i5000_drive_pattern(c, I5000_FBDICMD_ALL_ONES, 0);
+ return 0;
+}
+
+static int i5000_link_training0(struct i5000_fbd_branch *b)
+{
+ device_t branchdev = b->branchdev;
+
+ pci_mmio_write_config8(branchdev, I5000_FBDPLLCTRL, b->used ? 0 : 1);
+
+ if (i5000_for_each_channel(b, i5000_setup_channel))
+ return -1;
+
+ if (i5000_for_each_channel(b, i5000_train_channel_idle))
+ return -1;
+
+ i5000_fbd_next_state(b, I5000_FBDHPC_STATE_INIT);
+
+ if (i5000_for_each_channel(b, i5000_drive_test_patterns0))
+ return -1;
+
+ i5000_fbd_next_state(b, I5000_FBDHPC_STATE_READY);
+ return 0;
+}
+
+static int i5000_link_training1(struct i5000_fbd_branch *b)
+{
+ if (i5000_for_each_channel(b, i5000_train_channel_idle))
+ return -1;
+
+ i5000_fbd_next_state(b, I5000_FBDHPC_STATE_INIT);
+
+ if (i5000_for_each_channel(b, i5000_drive_test_patterns1))
+ return -1;
+
+ i5000_fbd_next_state(b, I5000_FBDHPC_STATE_READY);
+ return 0;
+}
+
+
+static int i5000_amb_check(struct i5000_fbdimm *d)
+{
+ u32 id = i5000_amb_read_config32(d, 0, 0);
+
+ printk(BIOS_DEBUG, "AMB %d/%d/%d ID: %04x:%04x\n",
+ d->branch->num, d->channel->num, d->num,
+ id & 0xffff, id >> 16);
+
+ if ((id & 0xffff) != d->vendor || id >> 16 != d->device) {
+ printk(BIOS_ERR, "AMB mapping failed\n");
+ return -1;
+ }
+ return 0;
+}
+
+static int i5000_amb_postinit(struct i5000_fbdimm *d)
+{
+ u32 *p32 = (u32 *)d->amb_personality_bytes;
+ u16 *p16 = (u16 *)d->amb_personality_bytes;
+
+ i5000_amb_write_config16(d, 1, 0xb6, p16[3]);
+ i5000_amb_write_config32(d, 1, 0xb8, p32[2]);
+ i5000_amb_write_config16(d, 1, 0xbc, p16[6]);
+ return 0;
+}
+
+static int i5000_amb_dram_timing_init(struct i5000_fbdimm *d)
+{
+ struct i5000_fbd_setup *s;
+ u32 val, tref;
+ int refi;
+
+ s = d->setup;
+
+ printk(BIOS_DEBUG, "DIMM %d/%d/%d config:\n",
+ d->branch->num, d->channel->num, d->num);
+
+ val = 0x44;
+ printk(BIOS_DEBUG, "\tDDR2ODTC: 0x%02x\n", val);
+ i5000_amb_write_config8(d, 4, AMB_DDR2ODTC, val);
+
+ val = (0x0c << 24) | /* CLK control */
+ (1 << 18) | /* ODTZ enabled */
+ (((d->setup->bl & BL_BL8) ? 1 : 0) << 8) | /* 8 byte burst length supported */
+ ((d->setup->t_al & 0x0f) << 4) | /* additive latency */
+ (d->setup->t_cl & 0x0f); /* CAS latency */
+
+ if (d->ranks > 1) {
+ val |= (0x03 << 9);
+ } else {
+ val |= (0x01 << 9);
+ }
+
+ printk(BIOS_DEBUG, "AMB_DRC: %08x\n", val);
+ i5000_amb_write_config32(d, 3, AMB_DRC, val);
+
+ val = (d->sdram_width << 30) |
+ ((d->ranks == 2 ? 1 : 0) << 29) |
+ ((d->banks == 8 ? 1 : 0) << 28) |
+ ((d->rows - 13) << 26) |
+ ((d->columns - 10) << 24) |
+ (1 << 16) | /* Auto refresh exit */
+ (0x27 << 8) | /* t_xsnr */
+ (d->setup->t_rp << 4) |
+ (((d->t_ck_min * d->mtb_dividend) / d->mtb_divisor) & 0x0f);
+
+ printk(BIOS_DEBUG, "\tAMB_DSREFTC: %08x\n", val);
+ i5000_amb_write_config32(d, 3, AMB_DSREFTC, val);
+
+ tref = 15;
+
+ switch(d->t_refi & 0x0f) {
+ case 0:
+ refi = 15625;
+ break;
+ case 1:
+ refi = 3900;
+ tref = 3;
+ break;
+ case 2:
+ refi = 7800;
+ tref = 7;
+ break;
+ case 3:
+ refi = 31250;
+ break;
+ case 4:
+ refi = 62500;
+ break;
+ case 5:
+ refi = 125000;
+ break;
+ default:
+ printk(BIOS_ERR, "unsupported t_refi value: %d, using 7.8us\n",
+ d->t_refi & 0x0f);
+ refi = 7800;
+ break;
+ }
+
+ s->t_ref = tref;
+ val = delay_ns_to_clocks(d, refi) | (s->t_rfc << 16);
+
+ printk(BIOS_DEBUG, "\tAMB_DAREFTC: %08x\n", val);
+ i5000_amb_write_config32(d, 3, AMB_DAREFTC, val);
+
+ u8 t_r2w = ((s->bl & BL_BL8) ? 4 : 2) +
+ (((d->t_ck_min * d->mtb_dividend) / d->mtb_divisor));
+ u8 t_w2r = (s->t_cl - 1) + ((s->bl & BL_BL8) ? 4 : 2) + s->t_wtr;
+
+ val = ((6 - s->t_rp) << 8) | ((6 - s->t_rcd) << 10) |
+ ((26 - s->t_rc) << 12) | ((9 - s->t_wr) << 16) |
+ ((12 - t_w2r) << 20) | ((10 - t_r2w) << 24) |
+ ((s->t_rtp - 2) << 27);
+
+ switch(s->t_ras) {
+ case 15:
+ val |= (1 << 29);
+ break;
+ case 12:
+ val |= (2 << 29);
+ break;
+ default:
+ break;
+ }
+
+ printk(BIOS_DEBUG, "\tAMB_DRT: %08x\n", val);
+ i5000_amb_write_config32(d, 3, AMB_DRT, val);
+ return 0;
+}
+
+static int i5000_do_amb_membist_start(struct i5000_fbdimm *d, int rank, int pattern)
+{
+ printk(BIOS_DEBUG, "DIMM %d/%d/%d rank %d pattern %d\n",
+ d->branch->num, d->channel->num, d->num, rank, pattern);
+
+ i5000_amb_write_config32(d, 3, AMB_DAREFTC,
+ i5000_amb_read_config32(d, 3, AMB_DAREFTC) | 0x8000);
+
+ i5000_amb_write_config32(d, 3, AMB_MBLFSRSED, 0x12345678);
+ i5000_amb_write_config32(d, 3, AMB_MBADDR, 0);
+ i5000_amb_write_config32(d, 3, AMB_MBCSR, 0x800000f0 | (rank << 20) | ((pattern & 3) << 8));
+ return 0;
+}
+
+static int i5000_do_amb_membist_status(struct i5000_fbdimm *d, int rank)
+{
+ int cnt = 1000;
+ u32 res;
+
+ while((res = i5000_amb_read_config32(d, 3, AMB_MBCSR)) & (1 << 31) && cnt--)
+ udelay(1000);
+
+ if (cnt && !(res & (1 << 30)))
+ return 0;
+
+ printk(BIOS_ERR, "DIMM %d/%d/%d rank %d failed membist check\n",
+ d->branch->num, d->channel->num, d->num, rank);
+ return -1;
+}
+
+static int i5000_amb_membist_zero1_start(struct i5000_fbdimm *d)
+{
+ if (i5000_do_amb_membist_start(d, 1, 0))
+ return -1;
+ return 0;
+}
+
+static int i5000_amb_membist_zero2_start(struct i5000_fbdimm *d)
+{
+
+ if (d->ranks < 2)
+ return 0;
+ if (i5000_do_amb_membist_start(d, 2, 0))
+ return -1;
+ return 0;
+}
+
+static int i5000_amb_membist_status1(struct i5000_fbdimm *d)
+{
+ if (i5000_do_amb_membist_status(d, 1))
+ return -1;
+ return 0;
+}
+
+static int i5000_amb_membist_status2(struct i5000_fbdimm *d)
+{
+ if (d->ranks < 2)
+ return 0;
+
+ if (i5000_do_amb_membist_status(d, 2))
+ return -1;
+ return 0;
+}
+
+static int i5000_amb_membist_end(struct i5000_fbdimm *d)
+{
+ printk(BIOS_DEBUG, "AMB_DRC MEMBIST: %08x\n", i5000_amb_read_config32(d, 3, AMB_DRC));
+ return 0;
+}
+
+static int i5000_membist(struct i5000_fbd_setup *setup)
+{
+ return i5000_for_each_dimm_present(setup, i5000_amb_membist_zero1_start) ||
+ i5000_for_each_dimm_present(setup, i5000_amb_membist_status1) ||
+ i5000_for_each_dimm_present(setup, i5000_amb_membist_zero2_start) ||
+ i5000_for_each_dimm_present(setup, i5000_amb_membist_status2) ||
+ i5000_for_each_dimm_present(setup, i5000_amb_membist_end);
+}
+
+static int i5000_enable_mc_autorefresh(struct i5000_fbdimm *d)
+{
+ u32 tmp = i5000_amb_read_config32(d, 3, AMB_DSREFTC);
+ tmp &= ~(1 << 16);
+ printk(BIOS_DEBUG, "new AMB_DSREFTC: 0x%08x\n", tmp);
+ i5000_amb_write_config32(d, 3, AMB_DSREFTC, tmp);
+ return 0;
+}
+
+static int i5000_amb_clear_error_status(struct i5000_fbdimm *d)
+{
+ i5000_amb_write_config32(d, 1, AMB_FERR, 9);
+ i5000_amb_write_config32(d, 1, AMB_NERR, 9);
+ i5000_amb_write_config32(d, 1, AMB_EMASK, 0xf2);
+ i5000_amb_write_config8(d, 3, 0x80, 0xcf);
+ i5000_amb_write_config8(d, 3, 0x81, 0xd3);
+ i5000_amb_write_config8(d, 3, 0x82, 0xf8);
+ return 0;
+}
+
+static void i5000_program_mtr(struct i5000_fbd_channel *c, int mtr)
+{
+ u32 val;
+
+ if (c->dimm[0].present || c->dimm[1].present) {
+ val = (((c->columns - 10) & 3) |
+ (((c->rows - 13) & 3) << 2) |
+ (((c->ranks == 2) ? 1 : 0) << 4) |
+ (((c->banks == 8) ? 1 : 0) << 5) |
+ ((c->width ? 1 : 0) << 6) |
+ (1 << 7) | /* Electrical Throttling enabled */
+ (1 << 8)); /* DIMM present and compatible */
+ printk(BIOS_DEBUG, "MTR0: %04x\n", val);
+ pci_mmio_write_config16(c->branch->branchdev, mtr, val);
+ }
+
+ if (c->dimm[2].present || c->dimm[3].present) {
+ val = (((c->columns - 10) & 3) |
+ (((c->rows - 13) & 3) << 4) |
+ ((c->ranks ? 1 : 0) << 4) |
+ (((c->banks == 8) ? 1 : 0) << 5) |
+ ((c->width ? 1 : 0) << 6) |
+ (1 << 7) | /* Electrical Throttling enabled */
+ (1 << 8)); /* DIMM present and compatible */
+ printk(BIOS_DEBUG, "MTR1: %04x\n", val);
+ pci_mmio_write_config16(c->branch->branchdev, mtr+2, val);
+ }
+}
+
+static int get_dmir(u8 *rankmap, int *_set, int limit)
+{
+ int i, dmir = 0, set = 0;
+
+ for(i = 7; set < limit && i >= 0; i--) {
+ if (!(*rankmap & (1 << i)))
+ continue;
+
+ *rankmap &= ~(1 << i);
+
+ switch(limit) {
+ case 1:
+ dmir |= (i |
+ (i << 3) |
+ (i << 6) |
+ (i << 9));
+ break;
+ case 2:
+ dmir |= (i << (set * 3)) |
+ (i << (6 + set * 3));
+ break;
+ case 4:
+ dmir |= (i << (set * 3));
+ break;
+
+ default:
+ break;
+ }
+ set++;
+ }
+ *_set = set;
+ return dmir;
+}
+
+static int i5000_setup_dmir(struct i5000_fbd_branch *b)
+{
+ struct i5000_fbdimm *d;
+ device_t dev = b->branchdev;
+ u8 rankmap = 0, dmir = 0;
+ u32 dmirval = 0;
+ int i, set, rankoffset = 0, ranksize = 0, ranks = 0;
+
+ if (!b->used)
+ return 0;
+
+ for(i = 0; i < I5000_MAX_DIMM_PER_CHANNEL; i++) {
+ rankmap >>= 2;
+ d = b->channel[0].dimm + i;
+
+ if (!d->present)
+ continue;
+
+ if (d->ranks == 2) {
+ rankmap |= 0xc0;
+ ranks += 2;
+ } else {
+ rankmap |= 0x40;
+ ranks++;
+ }
+ }
+
+ printk(BIOS_DEBUG, "total ranks: %d, rankmap: %02x\n", ranks, rankmap);
+
+ dmir = I5000_DMIR0;
+
+ ranksize = b->channel[0].dimm[0].ranksize << 8;
+
+ if (!b->setup->single_channel)
+ ranksize <<= 1;
+
+ while(ranks) {
+
+ if (ranks >= 4)
+ dmirval = get_dmir(&rankmap, &set, 4);
+ else if (ranks >= 2)
+ dmirval = get_dmir(&rankmap, &set, 2);
+ else
+ dmirval = get_dmir(&rankmap, &set, 1);
+
+ ranks -= set;
+
+ dmirval |= rankoffset + (set * ranksize);
+
+ rankoffset += (set * ranksize);
+
+ printk(BIOS_DEBUG, "DMIR%d: %08x\n", (dmir - I5000_DMIR0) >> 2,
+ dmirval);
+ pci_mmio_write_config32(dev, dmir, dmirval);
+ dmir += 4;
+ }
+
+ for(; dmir <= I5000_DMIR4; dmir += 4) {
+ printk(BIOS_DEBUG, "DMIR%d: %08x\n", (dmir - I5000_DMIR0) >> 2,
+ dmirval);
+ pci_mmio_write_config32(dev, dmir, dmirval);
+ }
+ return rankoffset;
+}
+
+static void i5000_setup_interleave(struct i5000_fbd_setup *setup)
+{
+ device_t dev16 = PCI_ADDR(0, 16, 1, 0);
+ u32 mir0, mir1, mir2, size0, size1, minsize, tmp;
+
+ size0 = i5000_setup_dmir(&setup->branch[1]) >> 12;
+ size1 = i5000_setup_dmir(&setup->branch[0]) >> 12;
+
+ minsize = MIN(size0, size1);
+
+ if (size0 > size1) {
+ tmp = size1;
+ size1 = size0;
+ size0 = tmp;
+ }
+
+ if (size0 == size1) {
+ mir0 = (size0 << 1) | 3;
+ mir1 = (size0 << 1);
+ mir2 = (size0 << 1);
+ } else if (!size0) {
+ mir0 = size1 | 1;
+ mir1 = size1;
+ mir2 = size1;
+ } else {
+ mir0 = (size0 << 1) | 3;
+ mir1 = (size1 + size0) | 1;
+ mir2 = size1 + size0;
+ }
+
+ printk(BIOS_DEBUG, "MIR0: %04x\n", mir0);
+ printk(BIOS_DEBUG, "MIR1: %04x\n", mir1);;
+ printk(BIOS_DEBUG, "MIR2: %04x\n", mir2);;
+
+ pci_mmio_write_config16(dev16, I5000_MIR0, mir0);
+ pci_mmio_write_config16(dev16, I5000_MIR1, mir1);
+ pci_mmio_write_config16(dev16, I5000_MIR2, mir2);
+}
+
+static int i5000_dram_timing_init(struct i5000_fbd_setup *setup)
+{
+ device_t dev16 = PCI_ADDR(0, 16, 1, 0);
+ u32 tolm, drta, drtb, mc, mca;
+ int t_wrc, bl2;
+
+ bl2 = (setup->bl & BL_BL8) ? 4 :2;
+ t_wrc = setup->t_rcd + (setup->t_cl - 1) + bl2 +
+ setup->t_wr + setup->t_rp;
+
+ drta = (setup->t_ref & 0x0f) |
+ ((setup->t_rrd & 0x0f) << 4) |
+ ((setup->t_rfc & 0xff) << 8) |
+ ((setup->t_rc & 0x3f) << 16) |
+ ((t_wrc & 0x3f) << 22) |
+ (setup->t_al & 0x07) << 28;
+
+ drtb = (bl2) |
+ (((1 + bl2 + setup->t_r2r) & 0x0f) << 4) |
+ (((setup->t_cl - 1 + bl2 + setup->t_wtr) & 0x0f) << 8) |
+ (((2 + bl2 + setup->t_r2w) & 0x0f) << 12) |
+ (((bl2 + setup->t_w2rdr) & 0x07) << 16);
+
+ mc = (1 << 30) | /* enable retry */
+ (3 << 25) | /* bad RAM threshold */
+ (1 << 21) | /* INITDONE */
+ (1 << 20) | /* FSB enable */
+ /* Electrical throttling: 20 clocks */
+ ((setup->ddr_speed == DDR_667MHZ ? 1 : 0) << 18) |
+ (1 << 8) | /* enhanced scrub mode */
+ (1 << 7) | /* enable patrol scrub */
+ (1 << 6) | /* enable demand scrubing */
+ (1 << 5); /* enable northbound error detection */
+
+ printk(BIOS_DEBUG, "DRTA: 0x%08x DRTB: 0x%08x MC: 0x%08x\n", drta, drtb, mc);
+ pci_mmio_write_config32(dev16, I5000_DRTA, drta);
+ pci_mmio_write_config32(dev16, I5000_DRTB, drtb);
+ pci_mmio_write_config32(dev16, I5000_MC, mc);
+
+ mca = pci_mmio_read_config32(dev16, I5000_MCA);
+
+ mca |= (7 << 28);
+ if (setup->single_channel)
+ mca |= (1 << 14);
+ else
+ mca &= ~(1 << 14);
+ printk(BIOS_DEBUG, "MCA: 0x%08x\n", mca);
+ pci_mmio_write_config32(dev16, I5000_MCA, mca);
+
+ pci_mmio_write_config32(dev16, I5000_ERRPERR, 0xffffffff);
+
+ i5000_program_mtr(&setup->branch[0].channel[0], I5000_MTR0);
+ i5000_program_mtr(&setup->branch[0].channel[1], I5000_MTR1);
+ i5000_program_mtr(&setup->branch[1].channel[0], I5000_MTR0);
+ i5000_program_mtr(&setup->branch[1].channel[1], I5000_MTR1);
+
+ i5000_setup_interleave(setup);
+
+ if ((tolm = MIN(setup->totalmem, 0xe00)) > 0xe00)
+ tolm = 0xe00;
+
+ tolm <<= 4;
+ printk(BIOS_DEBUG, "TOLM: 0x%04x\n", tolm);
+ pci_mmio_write_config16(dev16, I5000_TOLM, tolm);
+ return 0;
+}
+
+static void i5000_init_setup(struct i5000_fbd_setup *setup)
+{
+ int branch, channel, dimm, i = 0;
+ struct i5000_fbdimm *d;
+ struct i5000_fbd_channel *c;
+ struct i5000_fbd_branch *b;
+
+ setup->bl = 3;
+ /* default to highest memory frequency. If a module doesn't
+ support it, it will decrease this setting in spd_read */
+ setup->ddr_speed = DDR_667MHZ;
+
+ for(branch = 0; branch < I5000_MAX_BRANCH; branch++) {
+ b = setup->branch + branch;
+ b->branchdev = PCI_ADDR(0, branch ? 22 : 21, 0, 0);
+ b->setup = setup;
+ b->num = branch;
+
+ for(channel = 0; channel < I5000_MAX_CHANNEL; channel++) {
+ c = b->channel + channel;
+ c->branch = b;
+ c->setup = setup;
+ c->num = channel;
+
+ for(dimm = 0; dimm < I5000_MAX_DIMM_PER_CHANNEL; dimm++) {
+ d = c->dimm + dimm;
+ setup->dimms[i++] = d;
+ d->channel = c;
+ d->branch = b;
+ d->setup = setup;
+ d->num = dimm;
+ d->ambase = (b->num << 16) | (c->num << 15) | (dimm << 11);
+ }
+ }
+ }
+}
+
+static void i5000_reserved_register_init(struct i5000_fbd_setup *setup)
+{
+ /* register write captured from vendor BIOS, but undocument by Intel */
+ pci_mmio_write_config32(PCI_ADDR(0, 16, 0, 0), I5000_PROCENABLE, 0x487f7c);
+
+ pci_mmio_write_config32(PCI_ADDR(0, 16, 0, 0), 0xf4, 0x1588106);
+ pci_mmio_write_config32(PCI_ADDR(0, 16, 0, 0), 0xfc, 0x80);
+ pci_mmio_write_config32(PCI_ADDR(0, 16, 1, 0), 0x5c, 0x08);
+ pci_mmio_write_config32(PCI_ADDR(0, 16, 0, 0), 0x70, 0xfe2c08d);
+ pci_mmio_write_config32(PCI_ADDR(0, 16, 0, 0), 0x78, 0xfe2c08d);
+
+ pci_mmio_write_config32(PCI_ADDR(0, 16, 0, 0), 0x140, 0x18000000);
+ pci_mmio_write_config32(PCI_ADDR(0, 16, 0, 0), 0x440, 0x18000000);
+ pci_mmio_write_config32(PCI_ADDR(0, 17, 0, 0), 0x18c, 0x18000000);
+ pci_mmio_write_config32(PCI_ADDR(0, 16, 1, 0), 0x180, 0x18000000);
+ pci_mmio_write_config32(PCI_ADDR(0, 17, 0, 0), 0x180, 0x87ffffff);
+
+ pci_mmio_write_config32(PCI_ADDR(0, 0, 0, 0), 0x200, 0x18000000);
+ pci_mmio_write_config32(PCI_ADDR(0, 4, 0, 0), 0x200, 0x18000000);
+ pci_mmio_write_config32(PCI_ADDR(0, 0, 0, 0), 0x208, 0x18000000);
+ pci_mmio_write_config32(PCI_ADDR(0, 4, 0, 0), 0x208, 0x18000000);
+
+ pci_mmio_write_config32(PCI_ADDR(0, 17, 0, 0), 0x184, 0x01249249);
+ pci_mmio_write_config32(PCI_ADDR(0, 17, 0, 0), 0x154, 0x00000000);
+ pci_mmio_write_config32(PCI_ADDR(0, 17, 0, 0), 0x158, 0x02492492);
+ pci_mmio_write_config32(PCI_ADDR(0, 17, 0, 0), 0x15c, 0x00000000);
+ pci_mmio_write_config32(PCI_ADDR(0, 17, 0, 0), 0x160, 0x00000000);
+
+ pci_mmio_write_config16(PCI_ADDR(0, 19, 0, 0), 0x0090, 0x00000007);
+ pci_mmio_write_config16(PCI_ADDR(0, 19, 0, 0), 0x0092, 0x0000000f);
+
+ pci_mmio_write_config8(PCI_ADDR(0, 16, 0, 0), 0x0154, 0x10);
+ pci_mmio_write_config8(PCI_ADDR(0, 16, 0, 0), 0x0454, 0x10);
+
+ pci_mmio_write_config32(PCI_ADDR(0, 19, 0, 0), 0x007C, 0x00000001);
+ pci_mmio_write_config32(PCI_ADDR(0, 19, 0, 0), 0x007C, 0x00000000);
+ pci_mmio_write_config32(PCI_ADDR(0, 17, 0, 0), 0x0108, 0x000003F0);
+ pci_mmio_write_config32(PCI_ADDR(0, 17, 0, 0), 0x010C, 0x00000042);
+ pci_mmio_write_config16(PCI_ADDR(0, 17, 0, 0), 0x0112, 0x0000);
+ pci_mmio_write_config32(PCI_ADDR(0, 17, 0, 0), 0x0114, 0x00A0494C);
+ pci_mmio_write_config32(PCI_ADDR(0, 17, 0, 0), 0x0118, 0x0002134C);
+ pci_mmio_write_config32(PCI_ADDR(0, 17, 0, 0), 0x013C, 0x0C008000);
+ pci_mmio_write_config32(PCI_ADDR(0, 17, 0, 0), 0x0140, 0x0C008000);
+ pci_mmio_write_config32(PCI_ADDR(0, 17, 0, 0), 0x0144, 0x00008000);
+ pci_mmio_write_config32(PCI_ADDR(0, 17, 0, 0), 0x0148, 0x00008000);
+ pci_mmio_write_config32(PCI_ADDR(0, 19, 0, 0), 0x007C, 0x00000002);
+ pci_mmio_write_config32(PCI_ADDR(0, 16, 1, 0), 0x01F4, 0x00000800);
+
+ if (setup->branch[0].channel[0].used)
+ pci_mmio_write_config32(PCI_ADDR(0, 21, 0, 0), 0x010C, 0x004C0C10);
+
+ if (setup->branch[0].channel[1].used)
+ pci_mmio_write_config32(PCI_ADDR(0, 21, 0, 0), 0x020C, 0x004C0C10);
+
+ if (setup->branch[1].channel[0].used)
+ pci_mmio_write_config32(PCI_ADDR(0, 22, 0, 0), 0x010C, 0x004C0C10);
+
+ if (setup->branch[1].channel[1].used)
+ pci_mmio_write_config32(PCI_ADDR(0, 22, 0, 0), 0x020C, 0x004C0C10);
+}
+static void i5000_dump_error_registers(void)
+{
+ device_t dev = PCI_ADDR(0, 16, 1, 0);
+
+ printk(BIOS_ERR, "Dump of FBD error registers:\n"
+ "FERR_FAT_FBD: 0x%08x NERR_FAT_FBD: 0x%08x\n"
+ "FERR_NF_FBD: 0x%08x NERR_NF_FBD: 0x%08x\n"
+ "EMASK_FBD: 0x%08x\n"
+ "ERR0_FBD: 0x%08x\n"
+ "ERR1_FBD: 0x%08x\n"
+ "ERR2_FBD: 0x%08x\n"
+ "MC_ERR_FBD: 0x%08x\n",
+ pci_mmio_read_config32(dev, I5000_FERR_FAT_FBD),
+ pci_mmio_read_config32(dev, I5000_NERR_FAT_FBD),
+ pci_mmio_read_config32(dev, I5000_FERR_NF_FBD),
+ pci_mmio_read_config32(dev, I5000_NERR_NF_FBD),
+ pci_mmio_read_config32(dev, I5000_EMASK_FBD),
+ pci_mmio_read_config32(dev, I5000_ERR0_FBD),
+ pci_mmio_read_config32(dev, I5000_ERR1_FBD),
+ pci_mmio_read_config32(dev, I5000_ERR2_FBD),
+ pci_mmio_read_config32(dev, I5000_MCERR_FBD));
+
+ printk(BIOS_ERR, "Non recoverable error registers:\n"
+ "NRECMEMA: 0x%08x NRECMEMB: 0x%08x\n"
+ "NRECFGLOG: 0x%08x\n",
+ pci_mmio_read_config32(dev, I5000_NRECMEMA),
+ pci_mmio_read_config32(dev, I5000_NRECMEMB),
+ pci_mmio_read_config32(dev, I5000_NRECFGLOG));
+
+ printk(BIOS_ERR, "Packet data:\n"
+ "NRECFBDA: 0x%08x\n"
+ "NRECFBDB: 0x%08x\n"
+ "NRECFBDC: 0x%08x\n"
+ "NRECFBDD: 0x%08x\n"
+ "NRECFBDE: 0x%08x\n",
+ pci_mmio_read_config32(dev, I5000_NRECFBDA),
+ pci_mmio_read_config32(dev, I5000_NRECFBDB),
+ pci_mmio_read_config32(dev, I5000_NRECFBDC),
+ pci_mmio_read_config32(dev, I5000_NRECFBDD),
+ pci_mmio_read_config32(dev, I5000_NRECFBDE));
+
+ printk(BIOS_ERR, "recoverable error registers:\n"
+ "RECMEMA: 0x%08x RECMEMB: 0x%08x\n"
+ "RECFGLOG: 0x%08x\n",
+ pci_mmio_read_config32(dev, I5000_RECMEMA),
+ pci_mmio_read_config32(dev, I5000_RECMEMB),
+ pci_mmio_read_config32(dev, I5000_RECFGLOG));
+
+ printk(BIOS_ERR, "Packet data:\n"
+ "RECFBDA: 0x%08x\n"
+ "RECFBDB: 0x%08x\n"
+ "RECFBDC: 0x%08x\n"
+ "RECFBDD: 0x%08x\n"
+ "RECFBDE: 0x%08x\n",
+ pci_mmio_read_config32(dev, I5000_RECFBDA),
+ pci_mmio_read_config32(dev, I5000_RECFBDB),
+ pci_mmio_read_config32(dev, I5000_RECFBDC),
+ pci_mmio_read_config32(dev, I5000_RECFBDD),
+ pci_mmio_read_config32(dev, I5000_RECFBDE));
+
+}
+
+static void i5000_try_restart(const char *msg)
+{
+ printk(BIOS_INFO, msg);
+ i5000_dump_error_registers();
+// outb(0x06, 0xcf9);
+ for(;;) asm volatile("hlt");
+}
+
+static void i5000_pam_setup(void)
+{
+ pci_mmio_write_config8(PCI_ADDR(0, 16, 0, 0), 0x59, 0x30);
+ pci_mmio_write_config8(PCI_ADDR(0, 16, 0, 0), 0x5a, 0x33);
+ pci_mmio_write_config8(PCI_ADDR(0, 16, 0, 0), 0x5b, 0x33);
+ pci_mmio_write_config8(PCI_ADDR(0, 16, 0, 0), 0x5c, 0x33);
+ pci_mmio_write_config8(PCI_ADDR(0, 16, 0, 0), 0x5d, 0x33);
+ pci_mmio_write_config8(PCI_ADDR(0, 16, 0, 0), 0x5e, 0x33);
+ pci_mmio_write_config8(PCI_ADDR(0, 16, 0, 0), 0x5f, 0x33);
+}
+
+static int i5000_setup_clocking(struct i5000_fbd_setup *setup)
+{
+ int fbd, fsb, ddrfrq, ddrfrqnow;
+ msr_t msr;
+ device_t dev = PCI_ADDR(0, 16, 1, 0);
+
+ switch(setup->ddr_speed) {
+ case DDR_667MHZ:
+ fbd = 667;
+ break;
+ case DDR_533MHZ:
+ fbd = 533;
+ break;
+ default:
+ printk(BIOS_ERR, "%s: unsupported FBD speed\n", __func__);
+ return 1;
+ }
+
+ /* mainboard specific callback */
+ if (mainboard_set_fbd_clock(fbd)) {
+ printk(BIOS_ERR, "%s: failed to set FBD speed\n", __func__);
+ return 1;
+ }
+
+ msr = rdmsr(0xcd);
+
+ switch(msr.lo & 7) {
+ case 1:
+ fsb = 533;
+ break;
+ case 4:
+ fsb = 667;
+ break;
+ default:
+ printk(BIOS_ERR, "%s: unsupported FSB speed: %d\n", __func__, msr.lo & 7);
+ return 1;
+ }
+
+
+ ddrfrq = pci_mmio_read_config8(PCI_ADDR(0, 16, 1, 0), 0x56);
+ ddrfrqnow = ddrfrq;
+ ddrfrq &= ~0x3;
+
+ if (fsb < fbd)
+ ddrfrq |= 2;
+ else if (fsb > fbd)
+ ddrfrq |= 3;
+
+ switch((ddrfrq >> 4) & 3) {
+ case 0: /* 1:1 mapping */
+ pci_mmio_write_config32(dev, I5000_FBDTOHOSTGRCFG0, 0xffffffff);
+ pci_mmio_write_config32(dev, I5000_FBDTOHOSTGRCFG1, 0x00000000);
+ pci_mmio_write_config32(dev, I5000_HOSTTOFBDGRCFG, 0xffffffff);
+ pci_mmio_write_config8(dev, I5000_GRFBDLVLDCFG, 0x00);
+ pci_mmio_write_config8(dev, I5000_GRHOSTFULLCFG, 0x00);
+ pci_mmio_write_config8(dev, I5000_GRBUBBLECFG, 0x00);
+ pci_mmio_write_config8(dev, I5000_GRFBDTOHOSTDBLCFG, 0x00);
+ break;
+ case 2: /* 4:5 mapping */
+ pci_mmio_write_config32(dev, I5000_FBDTOHOSTGRCFG0, 0x00002323);
+ pci_mmio_write_config32(dev, I5000_FBDTOHOSTGRCFG1, 0x00000400);
+ pci_mmio_write_config32(dev, I5000_HOSTTOFBDGRCFG, 0x23023);
+ pci_mmio_write_config8(dev, I5000_GRFBDLVLDCFG, 0x04);
+ pci_mmio_write_config8(dev, I5000_GRHOSTFULLCFG, 0x08);
+ pci_mmio_write_config8(dev, I5000_GRBUBBLECFG, 0x00);
+ pci_mmio_write_config8(dev, I5000_GRFBDTOHOSTDBLCFG, 0x04);
+ break;
+ case 3:
+ /* 5:4 mapping */
+ pci_mmio_write_config32(dev, I5000_FBDTOHOSTGRCFG0, 0x00023230);
+ pci_mmio_write_config32(dev, I5000_FBDTOHOSTGRCFG1, 0x00000000);
+ pci_mmio_write_config32(dev, I5000_HOSTTOFBDGRCFG, 0x4323);
+ pci_mmio_write_config8(dev, I5000_GRFBDLVLDCFG, 0x00);
+ pci_mmio_write_config8(dev, I5000_GRHOSTFULLCFG, 0x02);
+ pci_mmio_write_config8(dev, I5000_GRBUBBLECFG, 0x10);
+ pci_mmio_write_config8(dev, I5000_GRFBDTOHOSTDBLCFG, 0x00);
+ break;
+ default:
+ printk(BIOS_DEBUG, "invalid DDRFRQ: %02x\n", ddrfrq);
+ return -1;
+ }
+
+ if (ddrfrq != ddrfrqnow) {
+ printk(BIOS_DEBUG, "old DDRFRQ: 0x%02x new DDRFRQ: 0x%02x\n",
+ ddrfrqnow, ddrfrq);
+ pci_mmio_write_config8(PCI_ADDR(0, 16, 1, 0), 0x56, ddrfrq);
+ /* FSB:FBD mapping changed, needs hard reset */
+ outb(0x06, 0xcf9);
+ for(;;) asm volatile("hlt");
+ }
+ return 0;
+}
+
+void i5000_fbdimm_init(void)
+{
+ struct i5000_fbd_setup setup;
+ u32 mca, mc;
+
+ memset(&setup, 0, sizeof(setup));
+
+ pci_mmio_write_config16(PCI_ADDR(0, 0, 0, 0), 0x4, 0x144);
+
+ i5000_init_setup(&setup);
+
+ pci_write_config32(PCI_DEV(0, 16, 0), 0xf0,
+ pci_mmio_read_config32(PCI_ADDR(0, 16, 0, 0), 0xf0) | 0x8000);
+
+ i5000_clear_fbd_errors();
+
+ printk(BIOS_INFO, "detecting memory modules\n");
+ if (i5000_for_each_dimm(&setup, i5000_read_spd_data)) {
+ printk(BIOS_ERR, "%s: failed to read SPD data\n", __func__);
+ return;
+ }
+
+ if (i5000_setup_clocking(&setup)) {
+ printk(BIOS_ERR, "%s: failed to set FBD clock\n", __func__);
+ return;
+ }
+
+ /* posted CAS requires t_AL = t_RCD - 1 */
+ setup.t_al = setup.t_rcd - 1;
+
+ printk(BIOS_DEBUG, "global timing parameters:\n"
+ "CL: %d RAS: %d WRC: %d RC: %d RFC: %d RRD: %d REF: %d W2RDR: %d\n"
+ "R2W: %d W2R: %d R2R: %d W2W: %d WTR: %d RCD: %d RP %d WR: %d RTP: %d AL: %d\n",
+ setup.t_cl, setup.t_ras, setup.t_wrc, setup.t_rc, setup.t_rfc,
+ setup.t_rrd, setup.t_ref, setup.t_w2rdr, setup.t_r2w, setup.t_w2r,
+ setup.t_r2r, setup.t_w2w, setup.t_wtr, setup.t_rcd,
+ setup.t_rp, setup.t_wr, setup.t_rtp, setup.t_al);
+
+ setup.single_channel = (!(setup.branch[0].channel[1].used ||
+ setup.branch[1].channel[0].used ||
+ setup.branch[1].channel[1].used));
+
+ pci_mmio_write_config32(PCI_ADDR(0, 16, 1, 0), 0x019C, 0x8010c);
+ pci_mmio_write_config32(PCI_ADDR(0, 16, 1, 0), 0x01F4, 0);
+
+ /* enable or disable single channel mode */
+ mca = pci_mmio_read_config32(PCI_ADDR(0, 16, 1, 0), I5000_MCA);
+ if (setup.single_channel)
+ mca |= (1 << 14);
+ else
+ mca &= ~(1 << 14);
+ pci_mmio_write_config32(PCI_ADDR(0, 16, 1, 0), I5000_MCA, mca);
+
+ /*
+ * i5000 supports burst length 8 only in single channel mode
+ * so strip BL_BL8 if we're operating in multichannel mode
+ */
+
+ if (!setup.single_channel)
+ setup.bl &= ~BL_BL8;
+
+ if (!setup.bl)
+ die("No supported burst length found\n");
+
+ mc = pci_mmio_read_config32(PCI_ADDR(0, 16, 1, 0), I5000_MC);
+ /* disable error checking for training */
+ pci_mmio_write_config32(PCI_ADDR(0, 16, 1, 0), I5000_MC, mc & ~0x20);
+
+ printk(BIOS_INFO, "performing fbd link initialization...");
+ if (i5000_for_each_branch(&setup, i5000_branch_reset) ||
+ i5000_for_each_dimm_present(&setup, i5000_amb_preinit) ||
+ i5000_for_each_branch(&setup, i5000_link_training0) ||
+ i5000_for_each_dimm_present(&setup, i5000_amb_check) ||
+ i5000_for_each_dimm_present(&setup, i5000_amb_postinit) ||
+ i5000_for_each_branch(&setup, i5000_link_training1)) {
+ i5000_try_restart("failed\n");
+ }
+ printk(BIOS_INFO, "done\n");
+ printk(BIOS_INFO, "initializing memory...");
+
+ if (i5000_for_each_dimm_present(&setup, i5000_ddr_init) ||
+ i5000_for_each_dimm_present(&setup, i5000_amb_dram_timing_init) ||
+ i5000_for_each_dimm_present(&setup, i5000_ddr_calibration)) {
+ i5000_try_restart("failed\n");
+ }
+ printk(BIOS_INFO,"done\n");
+ printk(BIOS_INFO, "clearing memory...");
+
+ if (i5000_membist(&setup))
+ i5000_try_restart("failed\n");
+ else
+ printk(BIOS_INFO, "done\n");
+
+ if (i5000_for_each_dimm_present(&setup, i5000_enable_mc_autorefresh))
+ i5000_try_restart("failed to enable auto refresh\n");
+
+ i5000_fbd_next_state(&setup.branch[0], I5000_FBDHPC_STATE_INIT);
+ i5000_fbd_next_state(&setup.branch[1], I5000_FBDHPC_STATE_INIT);
+
+ if (i5000_for_each_branch(&setup, i5000_link_training0))
+ i5000_try_restart("Channel training failed\n");
+
+ if (setup.branch[0].used)
+ i5000_fbd_next_state(&setup.branch[0], I5000_FBDHPC_STATE_READY);
+
+ if (setup.branch[1].used)
+ i5000_fbd_next_state(&setup.branch[1], I5000_FBDHPC_STATE_READY);
+
+ i5000_clear_fbd_errors();
+
+ /* enable error checking */
+ pci_mmio_write_config32(PCI_ADDR(0, 16, 1, 0), I5000_MC, mc | 0x20);
+
+ i5000_dram_timing_init(&setup);
+
+ i5000_reserved_register_init(&setup);
+
+ i5000_pam_setup();
+
+ if (i5000_for_each_dimm_present(&setup, i5000_amb_clear_error_status))
+ i5000_try_restart("failed to clear error status\n");
+
+ if (setup.branch[0].used)
+ i5000_fbd_next_state(&setup.branch[0], I5000_FBDHPC_STATE_ACTIVE);
+
+ if (setup.branch[1].used)
+ i5000_fbd_next_state(&setup.branch[1], I5000_FBDHPC_STATE_ACTIVE);
+
+#if CONFIG_NORTHBRIDGE_INTEL_I5000_RAM_CHECK
+ if (ram_check_nodie(0x000000, 0x0a0000) ||
+ ram_check_nodie(0x100000, MIN(setup.totalmem * 1048576, 0xe0000000))) {
+ i5000_try_restart("RAM verification failed");
+
+ }
+#endif
+
+ printk(BIOS_INFO, "Memory initialization finished\n");
+}
diff --git a/src/northbridge/intel/i5000/raminit.h b/src/northbridge/intel/i5000/raminit.h
new file mode 100644
index 0000000000..d3fa16a6ef
--- /dev/null
+++ b/src/northbridge/intel/i5000/raminit.h
@@ -0,0 +1,337 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Sven Schnelle <svens@stackframe.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#ifndef NORTHBRIDGE_I5000_RAMINIT_H
+#define NORTHBRIDGE_I5000_RAMINIT_H
+
+#include <types.h>
+#include <arch/io.h>
+#include <arch/romcc_io.h>
+
+#define I5000_MAX_BRANCH 2
+#define I5000_MAX_CHANNEL 2
+#define I5000_MAX_DIMM_PER_CHANNEL 4
+#define I5000_MAX_DIMMS (I5000_MAX_BRANCH * I5000_MAX_CHANNEL * I5000_MAX_DIMM_PER_CHANNEL)
+
+#define I5000_FBDRST 0x53
+
+#define I5000_SPD_BUSY (1 << 12)
+#define I5000_SPD_SBE (1 << 13)
+#define I5000_SPD_WOD (1 << 14)
+#define I5000_SPD_RDO (1 << 15)
+
+#define I5000_SPD0 0x74
+#define I5000_SPD1 0x76
+
+#define I5000_SPDCMD0 0x78
+#define I5000_SPDCMD1 0x7c
+
+#define I5000_FBDHPC 0x4f
+#define I5000_FBDST 0x4b
+
+#define I5000_FBDHPC_STATE_RESET 0x00
+#define I5000_FBDHPC_STATE_INIT 0x10
+#define I5000_FBDHPC_STATE_READY 0x20
+#define I5000_FBDHPC_STATE_ACTIVE 0x30
+
+#define I5000_FBDISTS0 0x58
+#define I5000_FBDISTS1 0x5a
+
+#define I5000_FBDLVL0 0x44
+#define I5000_FBDLVL1 0x45
+
+#define I5000_FBDICMD0 0x46
+#define I5000_FBDICMD1 0x47
+
+#define I5000_FBDICMD_IDLE 0x00
+#define I5000_FBDICMD_TS0 0x80
+#define I5000_FBDICMD_TS1 0x90
+#define I5000_FBDICMD_TS2 0xa0
+#define I5000_FBDICMD_TS3 0xb0
+#define I5000_FBDICMD_TS2_MERGE 0xd0
+#define I5000_FBDICMD_TS2_NOMERGE 0xe0
+#define I5000_FBDICMD_ALL_ONES 0xf0
+
+#define I5000_AMBPRESENT0 0x64
+#define I5000_AMBPRESENT1 0x66
+
+#define I5000_FBDSBTXCFG0 0xc0
+#define I5000_FBDSBTXCFG1 0xc1
+
+#define I5000_PROCENABLE 0xf0
+#define I5000_FBD0IBPORTCTL 0x180
+#define I5000_FBD0IBTXPAT2EN 0x1a8
+#define I5000_FBD0IBRXPAT2EN 0x1ac
+
+#define I5000_FBD0IBTXMSK 0x18c
+#define I5000_FBD0IBRXMSK 0x190
+
+#define I5000_FBDPLLCTRL 0x1c0
+
+/* dev 16, function 1 registers */
+#define I5000_MC 0x40
+#define I5000_DRTA 0x48
+#define I5000_DRTB 0x4c
+#define I5000_ERRPERR 0x50
+#define I5000_MCA 0x58
+#define I5000_TOLM 0x6c
+#define I5000_MIR0 0x80
+#define I5000_MIR1 0x84
+#define I5000_MIR2 0x88
+#define I5000_AMIR0 0x8c
+#define I5000_AMIR1 0x90
+#define I5000_AMIR2 0x94
+
+#define I5000_FERR_FAT_FBD 0x98
+#define I5000_NERR_FAT_FBD 0x9c
+#define I5000_FERR_NF_FBD 0xa0
+#define I5000_NERR_NF_FBD 0xa4
+#define I5000_EMASK_FBD 0xa8
+#define I5000_ERR0_FBD 0xac
+#define I5000_ERR1_FBD 0xb0
+#define I5000_ERR2_FBD 0xb4
+#define I5000_MCERR_FBD 0xb8
+#define I5000_NRECMEMA 0xbe
+#define I5000_NRECMEMB 0xc0
+#define I5000_NRECFGLOG 0xc4
+#define I5000_NRECMEMA 0xbe
+#define I5000_NRECFBDA 0xc8
+#define I5000_NRECFBDB 0xcc
+#define I5000_NRECFBDC 0xd0
+#define I5000_NRECFBDD 0xd4
+#define I5000_NRECFBDE 0xd8
+
+#define I5000_REDMEMB 0x7c
+#define I5000_RECMEMA 0xe2
+#define I5000_RECMEMB 0xe4
+#define I5000_RECFGLOG 0xe8
+#define I5000_RECFBDA 0xec
+#define I5000_RECFBDB 0xf0
+#define I5000_RECFBDC 0xf4
+#define I5000_RECFBDD 0xf8
+#define I5000_RECFBDE 0xfc
+
+#define I5000_FBDTOHOSTGRCFG0 0x160
+#define I5000_FBDTOHOSTGRCFG1 0x164
+#define I5000_HOSTTOFBDGRCFG 0x168
+#define I5000_GRFBDLVLDCFG 0x16c
+#define I5000_GRHOSTFULLCFG 0x16d
+#define I5000_GRBUBBLECFG 0x16e
+#define I5000_GRFBDTOHOSTDBLCFG 0x16f
+
+/* dev 16, function 2 registers */
+#define I5000_FERR_GLOBAL 0x40
+#define I5000_NERR_GLOBAL 0x44
+
+/* dev 21, function 0 registers */
+#define I5000_MTR0 0x80
+#define I5000_MTR1 0x84
+#define I5000_MTR2 0x88
+#define I5000_MTR3 0x8c
+#define I5000_DMIR0 0x90
+#define I5000_DMIR1 0x94
+#define I5000_DMIR2 0x98
+#define I5000_DMIR3 0x9c
+#define I5000_DMIR4 0xa0
+
+#define DEFAULT_AMBASE 0xfe000000
+
+/* AMB function 1 registers */
+#define AMB_FBDSBCFGNXT 0x54
+#define AMB_FBDLOCKTO 0x68
+#define AMB_EMASK 0x8c
+#define AMB_FERR 0x90
+#define AMB_NERR 0x94
+#define AMB_CMD2DATANXT 0xe8
+
+/* AMB function 3 registers */
+#define AMB_DAREFTC 0x70
+#define AMB_DSREFTC 0x74
+#define AMB_DRT 0x78
+#define AMB_DRC 0x7c
+
+#define AMB_MBCSR 0x40
+#define AMB_MBADDR 0x44
+#define AMB_MBLFSRSED 0xa4
+
+/* AMB function 4 registers */
+#define AMB_DCALCSR 0x40
+#define AMB_DCALADDR 0x44
+#define AMB_DCALCSR_START (1 << 31)
+
+#define AMB_DCALCSR_OPCODE_NOP 0x00
+#define AMB_DCALCSR_OPCODE_REFRESH 0x01
+#define AMB_DCALCSR_OPCODE_PRECHARGE 0x02
+#define AMB_DCALCSR_OPCODE_MRS_EMRS 0x03
+#define AMB_DCALCSR_OPCODE_DQS_DELAY_CAL 0x05
+#define AMB_DCALCSR_OPCODE_RECV_ENABLE_CAL 0x0c
+#define AMB_DCALCSR_OPCODE_SELF_REFRESH_ENTRY 0x0d
+
+#define AMB_DDR2ODTC 0xfc
+
+#define FBDIMM_SPD_SDRAM_ADDRESSING 0x04
+#define FBDIMM_SPD_MODULE_ORGANIZATION 0x07
+#define FBDIMM_SPD_FTB 0x08
+#define FBDIMM_SPD_MTB_DIVIDEND 0x09
+#define FBDIMM_SPD_MTB_DIVISOR 0x0a
+#define FBDIMM_SPD_MIN_TCK 0x0b
+#define FBDIMM_SPD_CAS_LATENCIES 0x0d
+#define FBDIMM_SPD_CAS_MIN_LATENCY 0x0e
+#define FBDIMM_SPD_T_WR 0x10
+#define FBDIMM_SPD_T_RCD 0x13
+#define FBDIMM_SPD_T_RRD 0x14
+#define FBDIMM_SPD_T_RP 0x15
+#define FBDIMM_SPD_T_RAS_RC_MSB 0x16
+#define FBDIMM_SPD_T_RAS 0x17
+#define FBDIMM_SPD_T_RC 0x18
+#define FBDIMM_SPD_T_RFC 0x19
+#define FBDIMM_SPD_T_WTR 0x1b
+#define FBDIMM_SPD_T_RTP 0x1c
+#define FBDIMM_SPD_BURST_LENGTHS_SUPPORTED 0x1d
+#define FBDIMM_SPD_ODT 0x4f
+#define FBDIMM_SPD_T_REFI 0x20
+#define FBDIMM_SPD_T_BB 0x83
+#define FBDIMM_SPD_CMD2DATA_800 0x54
+#define FBDIMM_SPD_CMD2DATA_667 0x55
+#define FBDIMM_SPD_CMD2DATA_533 0x56
+
+void i5000_fbdimm_init(void);
+
+#define I5000_BURST4 0x01
+#define I5000_BURST8 0x02
+#define I5000_BURST_CHOP 0x80
+
+#define I5000_ODT_50 4
+#define I5000_ODT_75 2
+#define I5000_ODT_150 1
+
+enum ddr_speeds {
+ DDR_533MHZ,
+ DDR_667MHZ,
+ DDR_MAX,
+};
+
+struct i5000_fbdimm {
+ struct i5000_fbd_branch *branch;
+ struct i5000_fbd_channel *channel;
+ struct i5000_fbd_setup *setup;
+ enum ddr_speeds speed;
+ int num;
+ int present:1;
+ u32 ambase;
+
+ /* SPD data */
+ u8 amb_personality_bytes[14];
+ u8 banks;
+ u8 rows;
+ u8 columns;
+ u8 ranks;
+ u8 odt;
+ u8 sdram_width;
+ u8 mtb_divisor;
+ u8 mtb_dividend;
+ u8 t_ck_min;
+ u8 min_cas_latency;
+ u8 t_rrd;
+ u16 t_rfc;
+ u8 t_wtr;
+ u8 t_refi;
+ u8 cmd2datanxt[DDR_MAX];
+
+ u16 vendor;
+ u16 device;
+
+ /* memory rank size in MB */
+ int ranksize;
+};
+
+struct i5000_fbd_channel {
+ struct i5000_fbdimm dimm[I5000_MAX_DIMM_PER_CHANNEL];
+ struct i5000_fbd_branch *branch;
+ struct i5000_fbd_setup *setup;
+ int num;
+ int used;
+ int highest_amb;
+ int columns;
+ int rows;
+ int ranks;
+ int banks;
+ int width;
+ /* memory size in MB on this channel */
+ int totalmem;
+};
+
+struct i5000_fbd_branch {
+ struct i5000_fbd_channel channel[I5000_MAX_CHANNEL];
+ struct i5000_fbd_setup *setup;
+ device_t branchdev;
+ int num;
+ int used;
+ /* memory size in MB on this branch */
+ int totalmem;
+};
+
+enum odt {
+ ODT_150OHM=1,
+ ODT_50OHM=4,
+ ODT_75OHM=2,
+};
+
+enum bl {
+ BL_BL4=1,
+ BL_BL8=2,
+};
+
+struct i5000_fbd_setup {
+ struct i5000_fbd_branch branch[I5000_MAX_BRANCH];
+ struct i5000_fbdimm *dimms[I5000_MAX_DIMMS];
+ enum bl bl;
+ enum ddr_speeds ddr_speed;
+
+ int single_channel:1;
+ u32 tolm;
+
+ /* global SDRAM timing parameters */
+ u8 t_al;
+ u8 t_cl;
+ u8 t_ras;
+ u8 t_wrc;
+ u8 t_rc;
+ u8 t_rfc;
+ u8 t_rrd;
+ u8 t_ref;
+ u8 t_w2rdr;
+ u8 t_r2w;
+ u8 t_w2r;
+ u8 t_r2r;
+ u8 t_w2w;
+ u8 t_wtr;
+ u8 t_rcd;
+ u8 t_rp;
+ u8 t_wr;
+ u8 t_rtp;
+ /* memory size in MB */
+ int totalmem;
+};
+
+int mainboard_set_fbd_clock(int);
+#define AMB_ADDR(base, fn, reg) (base | ((fn & 7) << 8) | ((reg & 0xff)))
+#endif
diff --git a/src/northbridge/intel/i5000/udelay.c b/src/northbridge/intel/i5000/udelay.c
new file mode 100644
index 0000000000..6462fe0316
--- /dev/null
+++ b/src/northbridge/intel/i5000/udelay.c
@@ -0,0 +1,84 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2008 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <delay.h>
+#include <stdint.h>
+#include <cpu/x86/tsc.h>
+#include <cpu/x86/msr.h>
+#include <console/console.h>
+/**
+ * Intel Core(tm) cpus always run the TSC at the maximum possible CPU clock
+ */
+
+void udelay(u32 us)
+{
+ u32 dword;
+ tsc_t tsc, tsc1, tscd;
+ msr_t msr;
+ u32 fsb = 0, divisor;
+ u32 d; /* ticks per us */
+ u32 dn = 0x1000000 / 2; /* how many us before we need to use hi */
+
+ msr = rdmsr(0xcd);
+ switch (msr.lo & 0x07) {
+ case 5:
+ fsb = 400;
+ break;
+ case 1:
+ fsb = 533;
+ break;
+ case 3:
+ fsb = 667;
+ break;
+ case 2:
+ fsb = 800;
+ break;
+ case 0:
+ fsb = 1067;
+ break;
+ case 4:
+ fsb = 1333;
+ break;
+ case 6:
+ fsb = 1600;
+ break;
+ }
+
+ msr = rdmsr(0x198);
+ divisor = (msr.hi >> 8) & 0x1f;
+
+ d = fsb * divisor;
+
+ tscd.hi = us / dn;
+ tscd.lo = (us - tscd.hi * dn) * d;
+
+ tsc1 = rdtsc();
+ dword = tsc1.lo + tscd.lo;
+ if ((dword < tsc1.lo) || (dword < tscd.lo)) {
+ tsc1.hi++;
+ }
+ tsc1.lo = dword;
+ tsc1.hi += tscd.hi;
+
+ tsc = rdtsc();
+
+ do {
+ tsc = rdtsc();
+ } while ((tsc.hi < tsc1.hi) || ((tsc.hi == tsc1.hi) && (tsc.lo < tsc1.lo)));
+}