diff options
Diffstat (limited to 'src/northbridge')
| -rw-r--r-- | src/northbridge/amd/lx/pll_reset.c | 2 | ||||
| -rw-r--r-- | src/northbridge/amd/lx/raminit.c | 18 |
2 files changed, 10 insertions, 10 deletions
diff --git a/src/northbridge/amd/lx/pll_reset.c b/src/northbridge/amd/lx/pll_reset.c index 8462e64a67..ecd482f603 100644 --- a/src/northbridge/amd/lx/pll_reset.c +++ b/src/northbridge/amd/lx/pll_reset.c @@ -30,7 +30,7 @@ static void pll_reset(char manualconf) print_debug_hex32(msrGlcpSysRstpll.hi); print_debug(":"); print_debug_hex32(msrGlcpSysRstpll.lo); - print_debug("\r\n"); + print_debug("\n"); POST_CODE(POST_PLL_INIT); if (!(msrGlcpSysRstpll.lo & (1 << RSTPLL_LOWER_SWFLAGS_SHIFT))) { diff --git a/src/northbridge/amd/lx/raminit.c b/src/northbridge/amd/lx/raminit.c index fd496d80f4..819a01670c 100644 --- a/src/northbridge/amd/lx/raminit.c +++ b/src/northbridge/amd/lx/raminit.c @@ -45,7 +45,7 @@ static void auto_size_dimm(unsigned int dimm) /* EEPROM byte usage: (5) Number of DIMM Banks */ spd_byte = spd_read_byte(dimm, SPD_NUM_DIMM_BANKS); if ((MIN_MOD_BANKS > spd_byte) && (spd_byte > MAX_MOD_BANKS)) { - print_debug("Number of module banks not compatible\r\n"); + print_debug("Number of module banks not compatible\n"); POST_CODE(ERROR_BANK_SET); __asm__ __volatile__("hlt\n"); } @@ -55,7 +55,7 @@ static void auto_size_dimm(unsigned int dimm) /* EEPROM byte usage: (17) Number of Banks on SDRAM Device */ spd_byte = spd_read_byte(dimm, SPD_NUM_BANKS_PER_SDRAM); if ((MIN_DEV_BANKS > spd_byte) && (spd_byte > MAX_DEV_BANKS)) { - print_debug("Number of device banks not compatible\r\n"); + print_debug("Number of device banks not compatible\n"); POST_CODE(ERROR_BANK_SET); __asm__ __volatile__("hlt\n"); } @@ -70,7 +70,7 @@ static void auto_size_dimm(unsigned int dimm) */ if ((spd_read_byte(dimm, SPD_NUM_ROWS) & 0xF0) || (spd_read_byte(dimm, SPD_NUM_COLUMNS) & 0xF0)) { - print_debug("Assymetirc DIMM not compatible\r\n"); + print_debug("Assymetirc DIMM not compatible\n"); POST_CODE(ERROR_UNSUPPORTED_DIMM); __asm__ __volatile__("hlt\n"); } @@ -83,7 +83,7 @@ static void auto_size_dimm(unsigned int dimm) dimm_size <<= (dimm_setting >> CF07_UPPER_D0_MB_SHIFT) & 1; /* shift to multiply by # DIMM banks */ dimm_size = __builtin_ctz(dimm_size); if (dimm_size > 8) { /* 8 is 1GB only support 1GB per DIMM */ - print_debug("Only support up to 1 GB per DIMM\r\n"); + print_debug("Only support up to 1 GB per DIMM\n"); POST_CODE(ERROR_DENSITY_DIMM); __asm__ __volatile__("hlt\n"); } @@ -114,7 +114,7 @@ static void auto_size_dimm(unsigned int dimm) spd_byte = NumColAddr[spd_read_byte(dimm, SPD_NUM_COLUMNS) & 0xF]; if (spd_byte > MAX_COL_ADDR) { - print_debug("DIMM page size not compatible\r\n"); + print_debug("DIMM page size not compatible\n"); POST_CODE(ERROR_SET_PAGE); __asm__ __volatile__("hlt\n"); } @@ -152,7 +152,7 @@ static void checkDDRMax(void) /* I don't think you need this check. if (spd_byte0 < 0xA0 || spd_byte0 < 0xA0){ - print_debug("DIMM overclocked. Check GeodeLink Speed\r\n"); + print_debug("DIMM overclocked. Check GeodeLink Speed\n"); POST_CODE(POST_PLL_MEM_FAIL); __asm__ __volatile__("hlt\n"); } */ @@ -549,7 +549,7 @@ static void sdram_set_spd_registers(const struct mem_controller *ctrl) } spd_byte = spd_read_byte(DIMM1, SPD_MODULE_ATTRIBUTES); if ((spd_byte != 0xFF) && (spd_byte & 3)) { - print_debug("DIMM1 NOT COMPATIBLE\r\n"); + print_debug("DIMM1 NOT COMPATIBLE\n"); POST_CODE(ERROR_UNSUPPORTED_DIMM); __asm__ __volatile__("hlt\n"); } @@ -718,7 +718,7 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl) msr.lo |= (209 << 8); /* bits[15:8] = 209 */ wrmsr(msrnum, msr); - print_debug("DRAM controller init done.\r\n"); + print_debug("DRAM controller init done.\n"); POST_CODE(POST_MEM_SETUP_GOOD); //0x7E /* make sure there is nothing stale in the cache */ @@ -750,6 +750,6 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl) msr.lo |= 1; wrmsr(msrnum, msr); } - print_debug("RAM DLL lock\r\n"); + print_debug("RAM DLL lock\n"); } |