diff options
Diffstat (limited to 'src/northbridge')
| -rw-r--r-- | src/northbridge/intel/sandybridge/ram_calc.c | 72 |
1 files changed, 15 insertions, 57 deletions
diff --git a/src/northbridge/intel/sandybridge/ram_calc.c b/src/northbridge/intel/sandybridge/ram_calc.c index 0253defa8e..43442f1acb 100644 --- a/src/northbridge/intel/sandybridge/ram_calc.c +++ b/src/northbridge/intel/sandybridge/ram_calc.c @@ -19,7 +19,7 @@ #include <arch/cpu.h> #include <arch/io.h> #include <cbmem.h> -#include <cpu/cpu.h> +#include <console/console.h> #include <cpu/intel/romstage.h> #include <cpu/x86/mtrr.h> #include <program_loading.h> @@ -44,83 +44,41 @@ void *cbmem_top(void) return (void *) smm_region_start(); } -static inline u32 *stack_push(u32 *stack, u32 value) -{ - stack = &stack[-1]; - *stack = value; - return stack; -} +#define ROMSTAGE_RAM_STACK_SIZE 0x5000 /* setup_stack_and_mtrrs() determines the stack to use after * cache-as-ram is torn down as well as the MTRR settings to use. */ void *setup_stack_and_mtrrs(void) { - int num_mtrrs; - u32 *slot; - u32 mtrr_mask_upper; - u32 top_of_ram; + struct postcar_frame pcf; + uintptr_t top_of_ram; - /* Top of stack needs to be aligned to a 4-byte boundary. */ - slot = (void *)romstage_ram_stack_top(); - num_mtrrs = 0; - - /* The upper bits of the MTRR mask need to set according to the number - * of physical address bits. */ - mtrr_mask_upper = (1 << (cpu_phys_address_size() - 32)) - 1; - - /* The order for each MTRR is value then base with upper 32-bits of - * each value coming before the lower 32-bits. The reasoning for - * this ordering is to create a stack layout like the following: - * +0: Number of MTRRs - * +4: MTRR base 0 31:0 - * +8: MTRR base 0 63:32 - * +12: MTRR mask 0 31:0 - * +16: MTRR mask 0 63:32 - * +20: MTRR base 1 31:0 - * +24: MTRR base 1 63:32 - * +28: MTRR mask 1 31:0 - * +32: MTRR mask 1 63:32 - */ + if (postcar_frame_init(&pcf, ROMSTAGE_RAM_STACK_SIZE)) + die("Unable to initialize postcar frame.\n"); /* Cache the ROM as WP just below 4GiB. */ - slot = stack_push(slot, mtrr_mask_upper); /* upper mask */ - slot = stack_push(slot, ~(CACHE_ROM_SIZE - 1) | MTRR_PHYS_MASK_VALID); - slot = stack_push(slot, 0); /* upper base */ - slot = stack_push(slot, ~(CACHE_ROM_SIZE - 1) | MTRR_TYPE_WRPROT); - num_mtrrs++; + postcar_frame_add_mtrr(&pcf, -CACHE_ROM_SIZE, CACHE_ROM_SIZE, + MTRR_TYPE_WRPROT); /* Cache RAM as WB from 0 -> CACHE_TMP_RAMTOP. */ - slot = stack_push(slot, mtrr_mask_upper); /* upper mask */ - slot = stack_push(slot, ~(CACHE_TMP_RAMTOP - 1) | MTRR_PHYS_MASK_VALID); - slot = stack_push(slot, 0); /* upper base */ - slot = stack_push(slot, 0 | MTRR_TYPE_WRBACK); - num_mtrrs++; + postcar_frame_add_mtrr(&pcf, 0, CACHE_TMP_RAMTOP, MTRR_TYPE_WRBACK); - top_of_ram = (uint32_t)cbmem_top(); + top_of_ram = (uintptr_t)cbmem_top(); /* Cache 8MiB below the top of ram. On sandybridge systems the top of * ram under 4GiB is the start of the TSEG region. It is required to * be 8MiB aligned. Set this area as cacheable so it can be used later * for ramstage before setting up the entire RAM as cacheable. */ - slot = stack_push(slot, mtrr_mask_upper); /* upper mask */ - slot = stack_push(slot, ~((8 << 20) - 1) | MTRR_PHYS_MASK_VALID); - slot = stack_push(slot, 0); /* upper base */ - slot = stack_push(slot, (top_of_ram - (8 << 20)) | MTRR_TYPE_WRBACK); - num_mtrrs++; + postcar_frame_add_mtrr(&pcf, top_of_ram - 8*MiB, 8*MiB, MTRR_TYPE_WRBACK); /* Cache 8MiB at the top of ram. Top of ram on sandybridge systems * is where the TSEG region resides. However, it is not restricted * to SMM mode until SMM has been relocated. By setting the region * to cacheable it provides faster access when relocating the SMM * handler as well as using the TSEG region for other purposes. */ - slot = stack_push(slot, mtrr_mask_upper); /* upper mask */ - slot = stack_push(slot, ~((8 << 20) - 1) | MTRR_PHYS_MASK_VALID); - slot = stack_push(slot, 0); /* upper base */ - slot = stack_push(slot, top_of_ram | MTRR_TYPE_WRBACK); - num_mtrrs++; + postcar_frame_add_mtrr(&pcf, top_of_ram, 8*MiB, MTRR_TYPE_WRBACK); /* Save the number of MTRRs to setup. Return the stack location - * pointing to the number of MTRRs. */ - slot = stack_push(slot, num_mtrrs); - - return slot; + * pointing to the number of MTRRs. + */ + return postcar_commit_mtrrs(&pcf); } |