summaryrefslogtreecommitdiff
path: root/src/northbridge
diff options
context:
space:
mode:
Diffstat (limited to 'src/northbridge')
-rw-r--r--src/northbridge/amd/amdk8/coherent_ht.c281
-rw-r--r--src/northbridge/amd/amdk8/raminit.c434
2 files changed, 422 insertions, 293 deletions
diff --git a/src/northbridge/amd/amdk8/coherent_ht.c b/src/northbridge/amd/amdk8/coherent_ht.c
index 81f044cc13..68d8b39e36 100644
--- a/src/northbridge/amd/amdk8/coherent_ht.c
+++ b/src/northbridge/amd/amdk8/coherent_ht.c
@@ -1,3 +1,11 @@
+#define COHERENT_AMD_SOLO 1 /* AMD Solo motherboard */
+#define COHERENT_ARIMA_HDAMA 2 /* Arima HDAMA motherboard */
+
+#ifndef COHERENT_CONFIG
+#define COHERENT_CONFIG COHERENT_AMD_SOLO
+#endif
+
+
static void setup_coherent_ht_domain(void)
{
static const unsigned int register_values[] = {
@@ -296,278 +304,6 @@ static void setup_coherent_ht_domain(void)
* F0:0xB8 i = 1,
* F0:0xD8 i = 2,
*/
- /* Careful set limit registers before base registers which contain the enables */
- /* DRAM Limit i Registers
- * F1:0x44 i = 0
- * F1:0x4C i = 1
- * F1:0x54 i = 2
- * F1:0x5C i = 3
- * F1:0x64 i = 4
- * F1:0x6C i = 5
- * F1:0x74 i = 6
- * F1:0x7C i = 7
- * [ 2: 0] Destination Node ID
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 7: 3] Reserved
- * [10: 8] Interleave select
- * specifies the values of A[14:12] to use with interleave enable.
- * [15:11] Reserved
- * [31:16] DRAM Limit Address i Bits 39-24
- * This field defines the upper address bits of a 40 bit address
- * that define the end of the DRAM region.
- */
-#if MEMORY_1024MB
- PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x003f0000,
-#endif
-#if MEMORY_512MB
- PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x001f0000,
-#endif
- PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
- PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002,
- PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003,
- PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004,
- PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005,
- PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006,
- PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007,
- /* DRAM Base i Registers
- * F1:0x40 i = 0
- * F1:0x48 i = 1
- * F1:0x50 i = 2
- * F1:0x58 i = 3
- * F1:0x60 i = 4
- * F1:0x68 i = 5
- * F1:0x70 i = 6
- * F1:0x78 i = 7
- * [ 0: 0] Read Enable
- * 0 = Reads Disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes Disabled
- * 1 = Writes Enabled
- * [ 7: 2] Reserved
- * [10: 8] Interleave Enable
- * 000 = No interleave
- * 001 = Interleave on A[12] (2 nodes)
- * 010 = reserved
- * 011 = Interleave on A[12] and A[14] (4 nodes)
- * 100 = reserved
- * 101 = reserved
- * 110 = reserved
- * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
- * [15:11] Reserved
- * [13:16] DRAM Base Address i Bits 39-24
- * This field defines the upper address bits of a 40-bit address
- * that define the start of the DRAM region.
- */
- PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000003,
-#if MEMORY_1024MB
- PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00400000,
- PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00400000,
- PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00400000,
- PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00400000,
- PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00400000,
- PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00400000,
- PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00400000,
-#endif
-#if MEMORY_512MB
- PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00200000,
- PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00200000,
- PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00200000,
- PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00200000,
- PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00200000,
- PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00200000,
- PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00200000,
-#endif
-
- /* Memory-Mapped I/O Limit i Registers
- * F1:0x84 i = 0
- * F1:0x8C i = 1
- * F1:0x94 i = 2
- * F1:0x9C i = 3
- * F1:0xA4 i = 4
- * F1:0xAC i = 5
- * F1:0xB4 i = 6
- * F1:0xBC i = 7
- * [ 2: 0] Destination Node ID
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 3: 3] Reserved
- * [ 5: 4] Destination Link ID
- * 00 = Link 0
- * 01 = Link 1
- * 10 = Link 2
- * 11 = Reserved
- * [ 6: 6] Reserved
- * [ 7: 7] Non-Posted
- * 0 = CPU writes may be posted
- * 1 = CPU writes must be non-posted
- * [31: 8] Memory-Mapped I/O Limit Address i (39-16)
- * This field defines the upp adddress bits of a 40-bit address that
- * defines the end of a memory-mapped I/O region n
- */
- PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00e1ff00,
- PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00dfff00,
- PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00e3ff00,
- PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000b00,
- PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00fe0b00,
-
- /* Memory-Mapped I/O Base i Registers
- * F1:0x80 i = 0
- * F1:0x88 i = 1
- * F1:0x90 i = 2
- * F1:0x98 i = 3
- * F1:0xA0 i = 4
- * F1:0xA8 i = 5
- * F1:0xB0 i = 6
- * F1:0xB8 i = 7
- * [ 0: 0] Read Enable
- * 0 = Reads disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes disabled
- * 1 = Writes Enabled
- * [ 2: 2] Cpu Disable
- * 0 = Cpu can use this I/O range
- * 1 = Cpu requests do not use this I/O range
- * [ 3: 3] Lock
- * 0 = base/limit registers i are read/write
- * 1 = base/limit registers i are read-only
- * [ 7: 4] Reserved
- * [31: 8] Memory-Mapped I/O Base Address i (39-16)
- * This field defines the upper address bits of a 40bit address
- * that defines the start of memory-mapped I/O region i
- */
- PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00e00003,
- PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00d80003,
- PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00e20003,
- PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000a03,
-#if MEMORY_1024MB
- PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00400003,
-#endif
-#if MEMORY_512MB
- PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00200003,
-#endif
-
- /* PCI I/O Limit i Registers
- * F1:0xC4 i = 0
- * F1:0xCC i = 1
- * F1:0xD4 i = 2
- * F1:0xDC i = 3
- * [ 2: 0] Destination Node ID
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 3: 3] Reserved
- * [ 5: 4] Destination Link ID
- * 00 = Link 0
- * 01 = Link 1
- * 10 = Link 2
- * 11 = reserved
- * [11: 6] Reserved
- * [24:12] PCI I/O Limit Address i
- * This field defines the end of PCI I/O region n
- * [31:25] Reserved
- */
- PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x0000d000,
- PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x000ff000,
- PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000,
-
- /* PCI I/O Base i Registers
- * F1:0xC0 i = 0
- * F1:0xC8 i = 1
- * F1:0xD0 i = 2
- * F1:0xD8 i = 3
- * [ 0: 0] Read Enable
- * 0 = Reads Disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes Disabled
- * 1 = Writes Enabled
- * [ 3: 2] Reserved
- * [ 4: 4] VGA Enable
- * 0 = VGA matches Disabled
- * 1 = matches all address < 64K and where A[9:0] is in the
- * range 3B0-3BB or 3C0-3DF independen of the base & limit registers
- * [ 5: 5] ISA Enable
- * 0 = ISA matches Disabled
- * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block
- * from matching agains this base/limit pair
- * [11: 6] Reserved
- * [24:12] PCI I/O Base i
- * This field defines the start of PCI I/O region n
- * [31:25] Reserved
- */
- PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x0000d003,
- PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00001013,
- PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000,
-
- /* Config Base and Limit i Registers
- * F1:0xE0 i = 0
- * F1:0xE4 i = 1
- * F1:0xE8 i = 2
- * F1:0xEC i = 3
- * [ 0: 0] Read Enable
- * 0 = Reads Disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes Disabled
- * 1 = Writes Enabled
- * [ 2: 2] Device Number Compare Enable
- * 0 = The ranges are based on bus number
- * 1 = The ranges are ranges of devices on bus 0
- * [ 3: 3] Reserved
- * [ 6: 4] Destination Node
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 7: 7] Reserved
- * [ 9: 8] Destination Link
- * 00 = Link 0
- * 01 = Link 1
- * 10 = Link 2
- * 11 - Reserved
- * [15:10] Reserved
- * [23:16] Bus Number Base i
- * This field defines the lowest bus number in configuration region i
- * [31:24] Bus Number Limit i
- * This field defines the highest bus number in configuration regin i
- */
- PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000003,
- PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000,
-
};
int i;
int max;
@@ -598,4 +334,3 @@ static void setup_coherent_ht_domain(void)
}
print_debug("done.\r\n");
}
-
diff --git a/src/northbridge/amd/amdk8/raminit.c b/src/northbridge/amd/amdk8/raminit.c
index 1f43e48671..6c757c993e 100644
--- a/src/northbridge/amd/amdk8/raminit.c
+++ b/src/northbridge/amd/amdk8/raminit.c
@@ -1,9 +1,305 @@
-#define MEMORY_512MB 0 /* SuSE Solo configuration */
-#define MEMORY_1024MB 1 /* LNXI Solo configuration */
+#define MEMORY_SUSE_SOLO 1 /* SuSE Solo configuration */
+#define MEMORY_LNXI_SOLO 2 /* LNXI Solo configuration */
+#define MEMORY_LNXI_HDAMA 3 /* LNXI HDAMA configuration */
+
+
+#ifndef MEMORY_CONFIG
+#define MEMORY_CONFIG MEMORY_SUSE_SOLO
+#endif
+
+static void setup_resource_map(const unsigned int *register_values, int max)
+{
+ int i;
+ print_debug("setting up resource map....\r\n");
+ for(i = 0; i < max; i += 3) {
+ device_t dev;
+ unsigned where;
+ unsigned long reg;
+#if 0
+ print_debug_hex32(register_values[i]);
+ print_debug(" <-");
+ print_debug_hex32(register_values[i+2]);
+ print_debug("\r\n");
+#endif
+ dev = register_values[i] & ~0xff;
+ where = register_values[i] & 0xff;
+ reg = pci_read_config32(dev, where);
+ reg &= register_values[i+1];
+ reg |= register_values[i+2];
+ pci_write_config32(dev, where, reg);
+#if 0
+ reg = pci_read_config32(register_values[i]);
+ reg &= register_values[i+1];
+ reg |= register_values[i+2] & ~register_values[i+1];
+ pci_write_config32(register_values[i], reg);
+#endif
+ }
+ print_debug("done.\r\n");
+}
+
+static void setup_default_resource_map(void)
+{
+ static const unsigned int register_values[] = {
+ /* Careful set limit registers before base registers which contain the enables */
+ /* DRAM Limit i Registers
+ * F1:0x44 i = 0
+ * F1:0x4C i = 1
+ * F1:0x54 i = 2
+ * F1:0x5C i = 3
+ * F1:0x64 i = 4
+ * F1:0x6C i = 5
+ * F1:0x74 i = 6
+ * F1:0x7C i = 7
+ * [ 2: 0] Destination Node ID
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 7: 3] Reserved
+ * [10: 8] Interleave select
+ * specifies the values of A[14:12] to use with interleave enable.
+ * [15:11] Reserved
+ * [31:16] DRAM Limit Address i Bits 39-24
+ * This field defines the upper address bits of a 40 bit address
+ * that define the end of the DRAM region.
+ */
+ PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
+ PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002,
+ PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003,
+ PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004,
+ PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005,
+ PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006,
+ PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007,
+ /* DRAM Base i Registers
+ * F1:0x40 i = 0
+ * F1:0x48 i = 1
+ * F1:0x50 i = 2
+ * F1:0x58 i = 3
+ * F1:0x60 i = 4
+ * F1:0x68 i = 5
+ * F1:0x70 i = 6
+ * F1:0x78 i = 7
+ * [ 0: 0] Read Enable
+ * 0 = Reads Disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes Disabled
+ * 1 = Writes Enabled
+ * [ 7: 2] Reserved
+ * [10: 8] Interleave Enable
+ * 000 = No interleave
+ * 001 = Interleave on A[12] (2 nodes)
+ * 010 = reserved
+ * 011 = Interleave on A[12] and A[14] (4 nodes)
+ * 100 = reserved
+ * 101 = reserved
+ * 110 = reserved
+ * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
+ * [15:11] Reserved
+ * [13:16] DRAM Base Address i Bits 39-24
+ * This field defines the upper address bits of a 40-bit address
+ * that define the start of the DRAM region.
+ */
+ PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000,
+
+ /* Memory-Mapped I/O Limit i Registers
+ * F1:0x84 i = 0
+ * F1:0x8C i = 1
+ * F1:0x94 i = 2
+ * F1:0x9C i = 3
+ * F1:0xA4 i = 4
+ * F1:0xAC i = 5
+ * F1:0xB4 i = 6
+ * F1:0xBC i = 7
+ * [ 2: 0] Destination Node ID
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 3: 3] Reserved
+ * [ 5: 4] Destination Link ID
+ * 00 = Link 0
+ * 01 = Link 1
+ * 10 = Link 2
+ * 11 = Reserved
+ * [ 6: 6] Reserved
+ * [ 7: 7] Non-Posted
+ * 0 = CPU writes may be posted
+ * 1 = CPU writes must be non-posted
+ * [31: 8] Memory-Mapped I/O Limit Address i (39-16)
+ * This field defines the upp adddress bits of a 40-bit address that
+ * defines the end of a memory-mapped I/O region n
+ */
+ PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00000000,
+
+ /* Memory-Mapped I/O Base i Registers
+ * F1:0x80 i = 0
+ * F1:0x88 i = 1
+ * F1:0x90 i = 2
+ * F1:0x98 i = 3
+ * F1:0xA0 i = 4
+ * F1:0xA8 i = 5
+ * F1:0xB0 i = 6
+ * F1:0xB8 i = 7
+ * [ 0: 0] Read Enable
+ * 0 = Reads disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes disabled
+ * 1 = Writes Enabled
+ * [ 2: 2] Cpu Disable
+ * 0 = Cpu can use this I/O range
+ * 1 = Cpu requests do not use this I/O range
+ * [ 3: 3] Lock
+ * 0 = base/limit registers i are read/write
+ * 1 = base/limit registers i are read-only
+ * [ 7: 4] Reserved
+ * [31: 8] Memory-Mapped I/O Base Address i (39-16)
+ * This field defines the upper address bits of a 40bit address
+ * that defines the start of memory-mapped I/O region i
+ */
+ PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00000000,
+
+ /* PCI I/O Limit i Registers
+ * F1:0xC4 i = 0
+ * F1:0xCC i = 1
+ * F1:0xD4 i = 2
+ * F1:0xDC i = 3
+ * [ 2: 0] Destination Node ID
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 3: 3] Reserved
+ * [ 5: 4] Destination Link ID
+ * 00 = Link 0
+ * 01 = Link 1
+ * 10 = Link 2
+ * 11 = reserved
+ * [11: 6] Reserved
+ * [24:12] PCI I/O Limit Address i
+ * This field defines the end of PCI I/O region n
+ * [31:25] Reserved
+ */
+ PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff000,
+ PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000,
+
+ /* PCI I/O Base i Registers
+ * F1:0xC0 i = 0
+ * F1:0xC8 i = 1
+ * F1:0xD0 i = 2
+ * F1:0xD8 i = 3
+ * [ 0: 0] Read Enable
+ * 0 = Reads Disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes Disabled
+ * 1 = Writes Enabled
+ * [ 3: 2] Reserved
+ * [ 4: 4] VGA Enable
+ * 0 = VGA matches Disabled
+ * 1 = matches all address < 64K and where A[9:0] is in the
+ * range 3B0-3BB or 3C0-3DF independen of the base & limit registers
+ * [ 5: 5] ISA Enable
+ * 0 = ISA matches Disabled
+ * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block
+ * from matching agains this base/limit pair
+ * [11: 6] Reserved
+ * [24:12] PCI I/O Base i
+ * This field defines the start of PCI I/O region n
+ * [31:25] Reserved
+ */
+ PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003,
+ PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000,
+
+ /* Config Base and Limit i Registers
+ * F1:0xE0 i = 0
+ * F1:0xE4 i = 1
+ * F1:0xE8 i = 2
+ * F1:0xEC i = 3
+ * [ 0: 0] Read Enable
+ * 0 = Reads Disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes Disabled
+ * 1 = Writes Enabled
+ * [ 2: 2] Device Number Compare Enable
+ * 0 = The ranges are based on bus number
+ * 1 = The ranges are ranges of devices on bus 0
+ * [ 3: 3] Reserved
+ * [ 6: 4] Destination Node
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 7: 7] Reserved
+ * [ 9: 8] Destination Link
+ * 00 = Link 0
+ * 01 = Link 1
+ * 10 = Link 2
+ * 11 - Reserved
+ * [15:10] Reserved
+ * [23:16] Bus Number Base i
+ * This field defines the lowest bus number in configuration region i
+ * [31:24] Bus Number Limit i
+ * This field defines the highest bus number in configuration regin i
+ */
+ PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000003,
+ PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000,
+ };
+ int max;
+ max = sizeof(register_values)/sizeof(register_values[0]);
+ setup_resource_map(register_values, max);
+}
static void sdram_set_registers(void)
{
static const unsigned int register_values[] = {
+
/* Careful set limit registers before base registers which contain the enables */
/* DRAM Limit i Registers
* F1:0x44 i = 0
@@ -31,13 +327,18 @@ static void sdram_set_registers(void)
* This field defines the upper address bits of a 40 bit address
* that define the end of the DRAM region.
*/
-#if MEMORY_1024MB
+#if MEMORY_CONFIG == MEMORY_LNXI_SOLO
PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x003f0000,
+ PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
#endif
-#if MEMORY_512MB
+#if MEMORY_CONFIG == MEMORY_SUSE_SOLO
PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x001f0000,
-#endif
PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
+#endif
+#if MEMORY_CONFIG == MEMORY_LNXI_HDAMA
+ PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x003f0000,
+ PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x007f0001,
+#endif
PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002,
PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003,
PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004,
@@ -75,7 +376,7 @@ static void sdram_set_registers(void)
* that define the start of the DRAM region.
*/
PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000003,
-#if MEMORY_1024MB
+#if MEMORY_CONFIG == MEMORY_LNXI_SOLO
PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00400000,
PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00400000,
PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00400000,
@@ -84,7 +385,7 @@ static void sdram_set_registers(void)
PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00400000,
PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00400000,
#endif
-#if MEMORY_512MB
+#if MEMORY_CONFIG == MEMORY_SUSE_SOLO
PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00200000,
PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00200000,
PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00200000,
@@ -93,6 +394,16 @@ static void sdram_set_registers(void)
PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00200000,
PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00200000,
#endif
+#if MEMORY_CONFIG == MEMORY_LNXI_HDAMA
+ PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00400003,
+ PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00800000,
+ PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00800000,
+ PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00800000,
+ PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00800000,
+ PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00800000,
+ PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00800000,
+ PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00800000,
+#endif
/* Memory-Mapped I/O Limit i Registers
* F1:0x84 i = 0
@@ -126,6 +437,7 @@ static void sdram_set_registers(void)
* This field defines the upp adddress bits of a 40-bit address that
* defines the end of a memory-mapped I/O region n
*/
+#if (MEMORY_CONFIG == MEMORY_LNXI_SOLO) || (MEMORY_CONFIG == MEMORY_SUSE_SOLO)
PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00e1ff00,
PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00dfff00,
PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00e3ff00,
@@ -134,6 +446,17 @@ static void sdram_set_registers(void)
PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000b00,
PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00fe0b00,
+#endif
+#if MEMORY_CONFIG == MEMORY_LNXI_HDAMA
+ PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00fe2f00,
+ PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00fec000,
+ PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x0000b000,
+ PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00000000,
+#endif
/* Memory-Mapped I/O Base i Registers
* F1:0x80 i = 0
@@ -161,6 +484,7 @@ static void sdram_set_registers(void)
* This field defines the upper address bits of a 40bit address
* that defines the start of memory-mapped I/O region i
*/
+#if (MEMORY_CONFIG == MEMORY_LNXI_SOLO) || (MEMORY_CONFIG == MEMORY_SUSE_SOLO)
PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00e00003,
PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00d80003,
PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00e20003,
@@ -168,12 +492,23 @@ static void sdram_set_registers(void)
PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000a03,
-#if MEMORY_1024MB
+#endif
+#if MEMORY_CONFIG == MEMORY_LNXI_SOLO
PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00400003,
#endif
-#if MEMORY_512MB
+#if MEMORY_CONFIG == MEMORY_SUSE_SOLO
PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00200003,
#endif
+#if MEMORY_CONFIG == MEMORY_LNXI_HDAMA
+ PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00fc0003,
+ PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00fec00e,
+ PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000a03,
+ PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00000000,
+#endif
/* PCI I/O Limit i Registers
* F1:0xC4 i = 0
@@ -200,10 +535,18 @@ static void sdram_set_registers(void)
* This field defines the end of PCI I/O region n
* [31:25] Reserved
*/
+#if (MEMORY_CONFIG == MEMORY_LNXI_SOLO) || (MEMORY_CONFIG == MEMORY_SUSE_SOLO)
PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x0000d000,
PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x000ff000,
PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000,
+#endif
+#if MEMORY_CONFIG == MEMORY_LNXI_HDAMA
+ PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff000,
+ PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000,
+#endif
/* PCI I/O Base i Registers
* F1:0xC0 i = 0
@@ -230,10 +573,18 @@ static void sdram_set_registers(void)
* This field defines the start of PCI I/O region n
* [31:25] Reserved
*/
+#if (MEMORY_CONFIG == MEMORY_LNXI_SOLO) || (MEMORY_CONFIG == MEMORY_SUSE_SOLO)
PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x0000d003,
PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00001013,
PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000,
+#endif
+#if MEMORY_CONFIG == MEMORY_LNXI_HDAMA
+ PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000033,
+ PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000,
+#endif
/* Config Base and Limit i Registers
* F1:0xE0 i = 0
@@ -271,10 +622,18 @@ static void sdram_set_registers(void)
* [31:24] Bus Number Limit i
* This field defines the highest bus number in configuration regin i
*/
+#if (MEMORY_CONFIG == MEMORY_LNXI_SOLO) || (MEMORY_CONFIG == MEMORY_SUSE_SOLO)
PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000003,
PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000,
+#endif
+#if MEMORY_CONFIG == MEMORY_LNXI_HDAMA
+ PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000003,
+ PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000,
+#endif
/* DRAM CS Base Address i Registers
* F2:0x40 i = 0
@@ -298,16 +657,21 @@ static void sdram_set_registers(void)
* bits decode 32-MByte blocks of memory.
*/
PCI_ADDR(0, 0x18, 2, 0x40), 0x001f01fe, 0x00000001,
-#if MEMORY_1024MB
+#if MEMORY_CONFIG == MEMORY_LNXI_SOLO
PCI_ADDR(0, 0x18, 2, 0x44), 0x001f01fe, 0x01000001,
PCI_ADDR(0, 0x18, 2, 0x48), 0x001f01fe, 0x02000001,
PCI_ADDR(0, 0x18, 2, 0x4C), 0x001f01fe, 0x03000001,
#endif
-#if MEMORY_512MB
+#if MEMORY_CONFIG == MEMORY_SUSE_SOLO
PCI_ADDR(0, 0x18, 2, 0x44), 0x001f01fe, 0x00800001,
PCI_ADDR(0, 0x18, 2, 0x48), 0x001f01fe, 0x01000001,
PCI_ADDR(0, 0x18, 2, 0x4C), 0x001f01fe, 0x01800001,
#endif
+#if MEMORY_CONFIG == MEMORY_LNXI_HDAMA
+ PCI_ADDR(0, 0x18, 2, 0x44), 0x001f01fe, 0x00001001,
+ PCI_ADDR(0, 0x18, 2, 0x48), 0x001f01fe, 0x00000000,
+ PCI_ADDR(0, 0x18, 2, 0x4C), 0x001f01fe, 0x00000000,
+#endif
PCI_ADDR(0, 0x18, 2, 0x50), 0x001f01fe, 0x00000000,
PCI_ADDR(0, 0x18, 2, 0x54), 0x001f01fe, 0x00000000,
PCI_ADDR(0, 0x18, 2, 0x58), 0x001f01fe, 0x00000000,
@@ -331,18 +695,24 @@ static void sdram_set_registers(void)
* [31:30] Reserved
*
*/
-#if MEMORY_1024MB
+#if MEMORY_CONFIG == MEMORY_LNXI_SOLO
PCI_ADDR(0, 0x18, 2, 0x60), 0xC01f01ff, 0x00e0fe00,
PCI_ADDR(0, 0x18, 2, 0x64), 0xC01f01ff, 0x00e0fe00,
PCI_ADDR(0, 0x18, 2, 0x68), 0xC01f01ff, 0x00e0fe00,
PCI_ADDR(0, 0x18, 2, 0x6C), 0xC01f01ff, 0x00e0fe00,
#endif
-#if MEMORY_512MB
+#if MEMORY_CONFIG == MEMORY_SUSE_SOLO
PCI_ADDR(0, 0x18, 2, 0x60), 0xC01f01ff, 0x0060fe00,
PCI_ADDR(0, 0x18, 2, 0x64), 0xC01f01ff, 0x0060fe00,
PCI_ADDR(0, 0x18, 2, 0x68), 0xC01f01ff, 0x0060fe00,
PCI_ADDR(0, 0x18, 2, 0x6C), 0xC01f01ff, 0x0060fe00,
#endif
+#if MEMORY_CONFIG == MEMORY_LNXI_HDAMA
+ PCI_ADDR(0, 0x18, 2, 0x60), 0xC01f01ff, 0x03e0ee00,
+ PCI_ADDR(0, 0x18, 2, 0x64), 0xC01f01ff, 0x03e0ee00,
+ PCI_ADDR(0, 0x18, 2, 0x68), 0xC01f01ff, 0x00000000,
+ PCI_ADDR(0, 0x18, 2, 0x6C), 0xC01f01ff, 0x00000000,
+#endif
PCI_ADDR(0, 0x18, 2, 0x70), 0xC01f01ff, 0x00000000,
PCI_ADDR(0, 0x18, 2, 0x74), 0xC01f01ff, 0x00000000,
PCI_ADDR(0, 0x18, 2, 0x78), 0xC01f01ff, 0x00000000,
@@ -367,12 +737,15 @@ static void sdram_set_registers(void)
* [11:11] Reserved
* [31:15]
*/
-#if MEMORY_1024MB
+#if MEMORY_CONFIG == MEMORY_LNXI_SOLO
PCI_ADDR(0, 0x18, 2, 0x80), 0xffff8888, 0x00000033,
#endif
-#if MEMORY_512MB
+#if MEMORY_CONFIG == MEMORY_SUSE_SOLO
PCI_ADDR(0, 0x18, 2, 0x80), 0xffff8888, 0x00000022,
#endif
+#if MEMORY_CONFIG == MEMORY_LNXI_HDAMA
+ PCI_ADDR(0, 0x18, 2, 0x80), 0xffff8888, 0x00000003,
+#endif
/* DRAM Timing Low Register
* F2:0x88
* [ 2: 0] Tcl (Cas# Latency, Cas# to read-data-valid)
@@ -437,7 +810,12 @@ static void sdram_set_registers(void)
* 1 = 3 bus clocks
* [31:29] Reserved
*/
+#if (MEMORY_CONFIG == MEMORY_LNXI_SOLO) || (MEMORY_CONFIG == MEMORY_SUSE_SOLO)
PCI_ADDR(0, 0x18, 2, 0x88), 0xe8088008, 0x03623125,
+#endif
+#if MEMORY_CONFIG == MEMORY_LNXI_HDAMA
+ PCI_ADDR(0, 0x18, 2, 0x88), 0xe8088008, 0x13723335,
+#endif
/* DRAM Timing High Register
* F2:0x8C
* [ 0: 0] Twtr (Write to Read Delay)
@@ -467,13 +845,15 @@ static void sdram_set_registers(void)
* 001 = 2 Mem clocks after CAS# (Registered Dimms)
* [31:23] Reserved
*/
-#if MEMORY_1024MB
+#if MEMORY_CONFIG == MEMORY_LNXI_SOLO
PCI_ADDR(0, 0x18, 2, 0x8c), 0xff8fe08e, 0x00000930,
#endif
-#if MEMORY_512MB
+#if MEMORY_CONFIG == MEMORY_SUSE_SOLO
PCI_ADDR(0, 0x18, 2, 0x8c), 0xff8fe08e, 0x00000130,
#endif
-
+#if MEMORY_CONFIG == MEMORY_LNXI_HDAMA
+ PCI_ADDR(0, 0x18, 2, 0x8c), 0xff8fe08e, 0x00100a20,
+#endif
/* DRAM Config Low Register
* F2:0x90
* [ 0: 0] DLL Disable
@@ -544,6 +924,7 @@ static void sdram_set_registers(void)
* 111 = Oldest entry in DCQ can be bypassed 7 times
* [31:28] Reserved
*/
+#if (MEMORY_CONFIG == MEMORY_LNXI_SOLO) || (MEMORY_CONFIG == MEMORY_SUSE_SOLO)
PCI_ADDR(0, 0x18, 2, 0x90), 0xf0000000,
(4 << 25)|(0 << 24)|
(0 << 23)|(0 << 22)|(0 << 21)|(0 << 20)|
@@ -551,6 +932,16 @@ static void sdram_set_registers(void)
(2 << 14)|(0 << 13)|(0 << 12)|
(0 << 11)|(0 << 10)|(0 << 9)|(0 << 8)|
(0 << 3) |(0 << 1) |(0 << 0),
+#endif
+#if MEMORY_CONFIG == MEMORY_LNXI_HDAMA
+ PCI_ADDR(0, 0x18, 2, 0x90), 0xf0000000,
+ (4 << 25)|(0 << 24)|
+ (0 << 23)|(0 << 22)|(0 << 21)|(0 << 20)|
+ (0 << 19)|(0 << 18)|(0 << 17)|(1 << 16)|
+ (2 << 14)|(0 << 13)|(0 << 12)|
+ (0 << 11)|(0 << 10)|(0 << 9)|(0 << 8)|
+ (0 << 3) |(0 << 1) |(0 << 0),
+#endif
/* DRAM Config High Register
* F2:0x94
* [ 0: 3] Maximum Asynchronous Latency
@@ -615,12 +1006,15 @@ static void sdram_set_registers(void)
* 1 = Enabled
* [31:30] Reserved
*/
-#if MEMORY_1024MB
+#if MEMORY_CONFIG == MEMORY_LNXI_SOLO
PCI_ADDR(0, 0x18, 2, 0x94), 0xc180f0f0, 0x0e2b0a05,
#endif
-#if MEMORY_512MB
+#if MEMORY_CONFIG == MEMORY_SUSE_SOLO
PCI_ADDR(0, 0x18, 2, 0x94), 0xc180f0f0, 0x0e2b0a06,
#endif
+#if MEMORY_CONFIG == MEMORY_LNXI_HDAMA
+ PCI_ADDR(0, 0x18, 2, 0x94), 0xc180f0f0, 0x065b0b08,
+#endif
/* DRAM Delay Line Register
* F2:0x98
* Adjust the skew of the input DQS strobe relative to DATA