diff options
Diffstat (limited to 'src/northbridge/via/vx900/sata.c')
-rw-r--r-- | src/northbridge/via/vx900/sata.c | 6 |
1 files changed, 3 insertions, 3 deletions
diff --git a/src/northbridge/via/vx900/sata.c b/src/northbridge/via/vx900/sata.c index 98e4bd2f00..e0a54bdaee 100644 --- a/src/northbridge/via/vx900/sata.c +++ b/src/northbridge/via/vx900/sata.c @@ -199,7 +199,7 @@ static void vx900_sata_init(device_t dev) /* Resend COMRESET When Recovering SATA Gen2 Device Error */ pci_mod_config8(dev, 0x62, 1 << 1, 1 << 7); - /* Fix "PMP Device Can’t Detect HDD Normally" (VIA Porting Guide) + /* Fix "PMP Device Can't Detect HDD Normally" (VIA Porting Guide) * SATA device detection will not work unless we clear these bits. * Without doing this, SeaBIOS (and potentially other payloads) will * timeout when detecting SATA devices */ @@ -211,8 +211,8 @@ static void vx900_sata_init(device_t dev) * reset and check the BSY bit of one port only, and the BSY bit of * other port would be 1, then it does another software reset * immediately and causes the system hang. - * This is because the first software reset doesn’t finish, and the - * state machine of the host controller conflicts, it can’t finish the + * This is because the first software reset doesn't finish, and the + * state machine of the host controller conflicts, it can't finish the * second one anymore. The BSY bit of slave port would be always 1 after * the second software reset issues. BIOS should set the following * bit to avoid this issue. */ |