diff options
Diffstat (limited to 'src/northbridge/via/vx800/lpc.c')
-rw-r--r-- | src/northbridge/via/vx800/lpc.c | 18 |
1 files changed, 0 insertions, 18 deletions
diff --git a/src/northbridge/via/vx800/lpc.c b/src/northbridge/via/vx800/lpc.c index 427979646c..1ab11c05f7 100644 --- a/src/northbridge/via/vx800/lpc.c +++ b/src/northbridge/via/vx800/lpc.c @@ -83,11 +83,9 @@ static void pci_routing_fixup(struct device *dev) /* PCI slot */ printk(BIOS_INFO, "setting ide\n"); - //pci_assign_irqs(0, 0x0f, pin_to_irq(idePins)); /* Standard usb components */ printk(BIOS_INFO, "setting usb1-2\n"); -// pci_assign_irqs(0, 0x10, pin_to_irq(usbPins)); /* sound hardware */ printk(BIOS_INFO, "setting hdac audio\n"); @@ -109,7 +107,6 @@ static void setup_pm(device_t dev) pci_write_config8(dev, 0x82, 0x49); /* Primary interupt channel, define wake events 0 = IRQ0 15 = IRQ15 1 = en. */ -// pci_write_config16(dev, 0x84, 0x30f2); pci_write_config16(dev, 0x84, 0x609a); // 0x609a?? /* SMI output level to low, 7.5us throttle clock */ @@ -131,8 +128,6 @@ static void setup_pm(device_t dev) /* GP2 Timer Counter */ pci_write_config8(dev, 0x99, 0xfb); - /* GP3 Timer Counter */ - //pci_write_config8(dev, 0x9a, 0x20); /* Multi Function Select 1 */ pci_write_config8(dev, 0xe4, 0x00); @@ -178,16 +173,6 @@ static void setup_pm(device_t dev) * Will work for C3 and for FID/VID change. */ outb(0x1, VX800_ACPI_IO_BASE + 0x11); -/* - outw(0x0, 0x424); - outw(0x0, 0x42a); - outw(0x1, 0x42c); - outl(0x0, 0x434); - outl(0x01, 0x438); - outb(0x0, 0x442); - outl(0xffff7fff, 0x448); - outw(0x001, 0x404); -*/ } static void S3_ps2_kb_ms_wakeup(struct device *dev) @@ -234,7 +219,6 @@ static void vx800_sb_init(struct device *dev) pci_write_config8(dev, 0x6C, enables); // Map 4MB of FLASH into the address space -// pci_write_config8(dev, 0x41, 0x7f); // Set bit 6 of 0x40, because Award does it (IO recovery time) // IMPORTANT FIX - EISA 0x4d0 decoding must be on so that PCI @@ -255,7 +239,6 @@ static void vx800_sb_init(struct device *dev) pci_write_config8(dev, 0x59, 0x80); /* Set 0x5b to 0x01 to match Award */ - //pci_write_config8(dev, 0x5b, 0x01); enables = pci_read_config8(dev, 0x5b); enables |= 0x01; pci_write_config8(dev, 0x5b, enables); @@ -264,7 +247,6 @@ static void vx800_sb_init(struct device *dev) pci_write_config8(dev, 0x48, 0x0c); /* Set 0x58 to 0x42 APIC and RTC. */ - //pci_write_config8(dev, 0x58, 0x42); this cmd cause the irq0 can not be triggerd,since bit 5 was set to 0. enables = pci_read_config8(dev, 0x58); enables |= 0x41; // pci_write_config8(dev, 0x58, enables); |