aboutsummaryrefslogtreecommitdiff
path: root/src/northbridge/via/vx800/examples/chipset_init.c
diff options
context:
space:
mode:
Diffstat (limited to 'src/northbridge/via/vx800/examples/chipset_init.c')
-rw-r--r--src/northbridge/via/vx800/examples/chipset_init.c304
1 files changed, 152 insertions, 152 deletions
diff --git a/src/northbridge/via/vx800/examples/chipset_init.c b/src/northbridge/via/vx800/examples/chipset_init.c
index 9c00f96939..c04da9cbc8 100644
--- a/src/northbridge/via/vx800/examples/chipset_init.c
+++ b/src/northbridge/via/vx800/examples/chipset_init.c
@@ -93,12 +93,12 @@ static const struct VIA_PCI_REG_INIT_TABLE mNbStage2InitTable[] = {
0x00, 0xFF, NB_PXPTRF_REG(0x84), 0x00, 0x28,
0x00, 0xFF, NB_PXPTRF_REG(0x85), 0x00, 0xC0,
0x00, 0xFF, NB_MSGC_REG(0xA3), 0x00, 0x01, // RWAKEEN
-// 0x00, 0xFF, NB_PXPTRF_REG(0x64), 0x40, 0x00, //RTDNP2B32EN
+// 0x00, 0xFF, NB_PXPTRF_REG(0x64), 0x40, 0x00, //RTDNP2B32EN
0x00, 0xFF, NB_PXPTRF_REG(0xF3), 0xFC, 0x20,
0x00, 0xFF, NB_PXPTRF_REG(0x85), 0x00, 0x00, //RP2P1ABORT
-// fine-tune
+// fine-tune
// If no settings, C7 will hang or reboot in XP, but CN will not.
0x00, 0xFF, NB_HOST_REG(0x51), 0x84, 0x00,
0x00, 0xFF, NB_HOST_REG(0x52), 0x0F, 0x03,
@@ -108,8 +108,8 @@ static const struct VIA_PCI_REG_INIT_TABLE mNbStage2InitTable[] = {
0x00, 0xFF, NB_HOST_REG(0x5C), 0x10, 0x10,
0x00, 0xFF, NB_HOST_REG(0x5F), 0x0E, 0x08,
0x00, 0xFF, NB_HOST_REG(0x92), 0xFF, 0x04, // ACPI Base addr
- 0x00, 0xFF, NB_HOST_REG(0x97), 0x01, 0x01, // APIC MSI
- 0x00, 0xFF, NB_HOST_REG(0x99), 0x02, 0x00, // APIC MSI
+ 0x00, 0xFF, NB_HOST_REG(0x97), 0x01, 0x01, // APIC MSI
+ 0x00, 0xFF, NB_HOST_REG(0x99), 0x02, 0x00, // APIC MSI
//GTL
0x00, 0xFF, NB_HOST_REG(0x73), 0xFF, 0x66,
0x00, 0xFF, NB_HOST_REG(0xB2), 0xFF, 0x33,
@@ -163,9 +163,9 @@ static const struct VIA_PCI_REG_INIT_TABLE mBusControllerInitTable[] = {
0x00, 0xFF, SB_LPC_REG(0x67), 0x03, 0x01,
- 0x00, 0xFF, SB_LPC_REG(0x50), 0x7E, 0x00, // Setting PCI device enable
- 0x00, 0xFF, SB_LPC_REG(0x51), 0xD0, 0x00, // Setting PCI device enable
- 0x00, 0xFF, SB_VLINK_REG(0xD1), 0x04, 0x00, // Setting HDAC enable
+ 0x00, 0xFF, SB_LPC_REG(0x50), 0x7E, 0x00, // Setting PCI device enable
+ 0x00, 0xFF, SB_LPC_REG(0x51), 0xD0, 0x00, // Setting PCI device enable
+ 0x00, 0xFF, SB_VLINK_REG(0xD1), 0x04, 0x00, // Setting HDAC enable
{0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, // End of Table
};
@@ -249,8 +249,8 @@ void AcpiInit(void)
{
device_t_raw rawdevice = 0;
u8 sbchiprev;
- rawdevice = PCI_DEV(0, 0x11, 0);
- // Set the PMIO base io address
+ rawdevice = PCI_RAWDEV(0, 0x11, 0);
+ // Set the PMIO base io address
pci_rawmodify_config16(rawdevice, 0x88, VX800_ACPI_IO_BASE,
0xff80);
// Enable PMIO
@@ -277,13 +277,13 @@ void Stage2NbInit(void)
device_t_raw rawdevice = 0;
u8 nbchiprev;
u32 subid = 0;
- rawdevice = PCI_DEV(0, 0, 4);
+ rawdevice = PCI_RAWDEV(0, 0, 4);
nbchiprev = pci_rawread_config8(rawdevice, 0xf6);
printk_debug("NB chip revision =%x\n", nbchiprev);
via_pci_inittable(nbchiprev, mNbStage2InitTable);
- rawdevice = PCI_DEV(0, 0, 0);
+ rawdevice = PCI_RAWDEV(0, 0, 0);
subid = PCI_DEVICE_ID_VIA_VX855_D0F0 << 16 + PCI_VENDOR_ID_VIA;
pci_rawwrite_config32(rawdevice, 0x2C, subid);
@@ -295,15 +295,15 @@ void Stage2NbInit(void)
void IDECSupportOption(u8 sbchiprev)
{
- pci_rawmodify_config8(PCI_DEV(0, 0x11, 0), 0x50, 0, 0x08);
+ pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x50, 0, 0x08);
- pci_rawmodify_config8(PCI_DEV(0, 0xf, 0), 0x45, 0x00, 0x80);
- pci_rawmodify_config8(PCI_DEV(0, 0xf, 0), 0x0A, 0x01, 0xFF);
- pci_rawmodify_config8(PCI_DEV(0, 0xf, 0), 0x45, 0x80, 0x00);
- pci_rawmodify_config8(PCI_DEV(0, 0xf, 0), 0x40, 0x02, 0x00);
+ pci_rawmodify_config8(PCI_RAWDEV(0, 0xf, 0), 0x45, 0x00, 0x80);
+ pci_rawmodify_config8(PCI_RAWDEV(0, 0xf, 0), 0x0A, 0x01, 0xFF);
+ pci_rawmodify_config8(PCI_RAWDEV(0, 0xf, 0), 0x45, 0x80, 0x00);
+ pci_rawmodify_config8(PCI_RAWDEV(0, 0xf, 0), 0x40, 0x02, 0x00);
- pci_rawmodify_config8(PCI_DEV(0, 0xf, 0), 0x09, 0x00, 0x05); //COMPATIBLE MODE
-// pci_rawmodify_config8(PCI_DEV(0, 0xf, 0), 0x09, 0x05, 0x05);//native MODE
+ pci_rawmodify_config8(PCI_RAWDEV(0, 0xf, 0), 0x09, 0x00, 0x05); //COMPATIBLE MODE
+// pci_rawmodify_config8(PCI_RAWDEV(0, 0xf, 0), 0x09, 0x05, 0x05);//native MODE
via_pci_inittable(sbchiprev, IDEC_INIT);
}
@@ -350,23 +350,23 @@ void InitUHCI(u8 Number, u8 bEnable)
Mask = 0x0;
Value = 0x1 << BitShift;
}
- pci_rawmodify_config8(PCI_DEV(0, 0x11, 0), 0x50, Value, Mask);
+ pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x50, Value, Mask);
if (bEnable) {
D16 = 0;
- pci_rawwrite_config16(PCI_DEV(0, 0x10, BaseAddress),
+ pci_rawwrite_config16(PCI_RAWDEV(0, 0x10, BaseAddress),
0x20, D16);
// Config some Control Register
Mask = 0x00;
Value = 0x12;
- pci_rawmodify_config8(PCI_DEV(0, 0x10, BaseAddress),
+ pci_rawmodify_config8(PCI_RAWDEV(0, 0x10, BaseAddress),
0x41, Value, Mask);
Mask = 0x00;
Value = 0xEB;
- pci_rawmodify_config8(PCI_DEV(0, 0x10, BaseAddress),
+ pci_rawmodify_config8(PCI_RAWDEV(0, 0x10, BaseAddress),
0x4B, Value, Mask);
}
return;
@@ -407,13 +407,13 @@ void InitEHCI(u8 Number, u8 bEnable)
Mask = 0x0;
Value = 0x1 << 1;
}
- pci_rawmodify_config8(PCI_DEV(0, 0x11, 0), 0x50, Value, Mask);
+ pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x50, Value, Mask);
if (bEnable) {
// Get Chipset Revision
EHCIRevision =
- pci_rawread_config8(PCI_DEV(0, 0x10, 4), 0xF6);
+ pci_rawread_config8(PCI_RAWDEV(0, 0x10, 4), 0xF6);
printk_debug("EHCI Revision =%x\n", EHCIRevision);
via_pci_inittable(EHCIRevision, mEHCIInitTable);
}
@@ -475,9 +475,9 @@ void HpetInit(void)
{
u8 HpetEnable = HPET_ENABLE_BIT;
u16 HpetBase = HPET_BASE_ADDRESS;
- pci_rawwrite_config8(PCI_DEV(0, 0x11, 0), R_SB_HPET_CONTROL,
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), R_SB_HPET_CONTROL,
HpetEnable);
- pci_rawwrite_config16(PCI_DEV(0, 0x11, 0),
+ pci_rawwrite_config16(PCI_RAWDEV(0, 0x11, 0),
R_SB_HPET_ADDRESS + 1, HpetBase);
}
@@ -499,7 +499,7 @@ static const struct VIA_PCI_REG_INIT_TABLE mPMUInitTable[] = {
0x00, 0xFF, SB_LPC_REG(0xE2), 0x00, 0xEA,
0x00, 0xFF, SB_LPC_REG(0xE7), 0x00, 0x80,
- {0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, // End of Table
+ {0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, // End of Table
};
void InitPMU(u8 sbchiprev)
@@ -512,7 +512,7 @@ void InitPMU(u8 sbchiprev)
// Set SCI IRQ and its level trigger
Mask = 0x0F;
Value = 0x09;
- pci_rawmodify_config8(PCI_DEV(0, 0x11, 0), 0x82, Value, Mask);
+ pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x82, Value, Mask);
Mask = 0x02;
Value = 0x02;
@@ -533,7 +533,7 @@ void InitCPUCStatueSupport()
// Now it is C2 & C4 Up Down Mode
Mask = 0xFF;
Value = 0x30;
- pci_rawmodify_config8(PCI_DEV(0, 0x11, 0), R_SB_CX_STATE_BREAK_EVENT_ENABLE_1, Value, Mask); //SB_LPC_REG
+ pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), R_SB_CX_STATE_BREAK_EVENT_ENABLE_1, Value, Mask); //SB_LPC_REG
Mask = 0xFF;
Value = 0x1F;
@@ -542,15 +542,15 @@ void InitCPUCStatueSupport()
Mask = 0x00;
Value = 0x80;
- pci_rawmodify_config8(PCI_DEV(0, 0x11, 7), R_SB_PCI_ARBITRATION_2, Value, Mask); //SB_VLINK_REG
+ pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 7), R_SB_PCI_ARBITRATION_2, Value, Mask); //SB_VLINK_REG
Mask = 0xFF;
Value = 0x00;
- pci_rawmodify_config8(PCI_DEV(0, 0x11, 0), R_SB_MULTI_FUNCTION_SELECT_1, Value, Mask); //SB_VLINK_REG
+ pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), R_SB_MULTI_FUNCTION_SELECT_1, Value, Mask); //SB_VLINK_REG
Mask = 0xFF;
Value = 0x1F;
- pci_rawmodify_config8(PCI_DEV(0, 0x11, 0), R_SB_AUTO_SWITCH_P_STATE, Value, Mask); //SB_VLINK_REG
+ pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), R_SB_AUTO_SWITCH_P_STATE, Value, Mask); //SB_VLINK_REG
}
void InitSBPM(u8 sbchiprev)
@@ -565,7 +565,7 @@ void Stage2SbInit(void)
device_t_raw rawdevice = 0;
u8 sbchiprev;
- rawdevice = PCI_DEV(0, 11, 0);
+ rawdevice = PCI_RAWDEV(0, 11, 0);
sbchiprev = pci_rawread_config8(rawdevice, 0xf6);
printk_debug("SB chip revision =%x\n", sbchiprev);
@@ -585,7 +585,7 @@ void Stage2SbInit(void)
HpetInit();
- //pci_rawmodify_config8(PCI_DEV(0, 0x11, 0), 0x50, 0x76, 0);//SB_VLINK_REG
+ //pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x50, 0x76, 0);//SB_VLINK_REG
}
@@ -593,8 +593,8 @@ void Stage2SbInit(void)
void init_VIA_chipset(void)
{
printk_debug("In: init_VIA_chipset\n");
- //1.nbstage1 is done in raminit.
- //2.sbstage1
+ //1.nbstage1 is done in raminit.
+ //2.sbstage1
AcpiInit();
//3.nbstage2
Stage2NbInit();
@@ -603,18 +603,18 @@ void init_VIA_chipset(void)
Stage2SbInit();
//5.open hdac
- pci_rawmodify_config32(PCI_DEV(0, 0x11, 7), 0xd1, 0, 0x04);
+ pci_rawmodify_config32(PCI_RAWDEV(0, 0x11, 7), 0xd1, 0, 0x04);
printk_debug("End: init_VIA_chipset\n");
}
/**
* @brief Main function of the DRAM part of coreboot.
*
- * Coreboot is divided into Pre-DRAM part and DRAM part.
+ * Coreboot is divided into Pre-DRAM part and DRAM part.
+ *
*
- *
* Device Enumeration:
- * In the dev_enumerate() phase,
+ * In the dev_enumerate() phase,
*/
void hardwaremain(int boot_complete)
@@ -634,27 +634,27 @@ void hardwaremain(int boot_complete)
#if 0
- pci_rawwrite_config8(PCI_DEV(0, 0, 4), 0xa3, 0x80);
- pci_rawwrite_config8(PCI_DEV(0, 17, 7), 0x60, 0x20);
- pci_rawwrite_config8(PCI_DEV(0, 17, 7), 0xE5,
- pci_rawread_config8(PCI_DEV(0, 3, 0),
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0, 4), 0xa3, 0x80);
+ pci_rawwrite_config8(PCI_RAWDEV(0, 17, 7), 0x60, 0x20);
+ pci_rawwrite_config8(PCI_RAWDEV(0, 17, 7), 0xE5,
+ pci_rawread_config8(PCI_RAWDEV(0, 3, 0),
0x88));
#endif
- pci_rawmodify_config8(PCI_DEV(0, 0x11, 0), 0x51, 0x40, 0x40); //close CE-ATA (Consumer Electronics-ATA) and NFC
+ pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x51, 0x40, 0x40); //close CE-ATA (Consumer Electronics-ATA) and NFC
- //pci_rawmodify_config8(PCI_DEV(0, 0x11, 0), 0x50, 0x0, 0x40);//open USB Device Mode Enable
- pci_rawmodify_config8(PCI_DEV(0, 0x11, 0), 0x50, 0x40, 0x40); //close USB Device Mode
+ //pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x50, 0x0, 0x40);//open USB Device Mode Enable
+ pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x50, 0x40, 0x40); //close USB Device Mode
- //pci_rawmodify_config8(PCI_DEV(0, 0x11, 0), 0x50, 0x04, 0x04);//close USB 1.1 UHCI Port 4-5
- //pci_rawmodify_config8(PCI_DEV(0, 0x11, 0), 0x50, 0x02, 0x02);//close USB 2.0 ehci
+ //pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x50, 0x04, 0x04);//close USB 1.1 UHCI Port 4-5
+ //pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x50, 0x02, 0x02);//close USB 2.0 ehci
- //pci_rawmodify_config8(PCI_DEV(0, 0x11, 0), 0x50, 0x00, 0x76);//open all usb and usb mode
- //pci_rawmodify_config8(PCI_DEV(0, 0x11, 0), 0x50, 0x76, 0x76);//close all usb
+ //pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x50, 0x00, 0x76);//open all usb and usb mode
+ //pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x50, 0x76, 0x76);//close all usb
printk_info("=================SB 50h=%02x \n",
- pci_rawread_config8(PCI_DEV(0, 0x11, 0), 0x50));
+ pci_rawread_config8(PCI_RAWDEV(0, 0x11, 0), 0x50));
/* FIXME: Is there a better way to handle this? */
@@ -671,7 +671,7 @@ void hardwaremain(int boot_complete)
y = 0;
for (; y < 16; y++) {
printk_info("%02x ",
- pci_rawread_config8(PCI_DEV
+ pci_rawread_config8(PCI_RAWDEV
(0, 0x10, 4),
x * 16 + y));
}
@@ -690,7 +690,7 @@ void hardwaremain(int boot_complete)
y = 0;
for (; y < 16; y++) {
printk_info("%02x ",
- pci_rawread_config8(PCI_DEV
+ pci_rawread_config8(PCI_RAWDEV
(0, 0x10, 4),
x * 16 + y));
}
@@ -710,7 +710,7 @@ void hardwaremain(int boot_complete)
y = 0;
for (; y < 16; y++) {
printk_info("%02x ",
- pci_rawread_config8(PCI_DEV
+ pci_rawread_config8(PCI_RAWDEV
(0, 0x10, 4),
x * 16 + y));
}
@@ -723,7 +723,7 @@ void hardwaremain(int boot_complete)
printk_emerg("file '%s', line %d\n\n", __FILE__, __LINE__);
-// pci_rawwrite_config16(PCI_DEV(0, 0xf, 0), 0xBA, 0x0571);
+// pci_rawwrite_config16(PCI_RAWDEV(0, 0xf, 0), 0xBA, 0x0571);
#if 0
x = y = 0;
@@ -732,7 +732,7 @@ void hardwaremain(int boot_complete)
y = 0;
for (; y < 16; y++) {
printk_info("%02x ",
- pci_rawread_config8(PCI_DEV
+ pci_rawread_config8(PCI_RAWDEV
(0, 0x10, 4),
x * 16 + y));
}
@@ -743,10 +743,10 @@ void hardwaremain(int boot_complete)
#if 0
- y = pci_rawread_config8(PCI_DEV(0, 0xf, 0), 0x0d);
+ y = pci_rawread_config8(PCI_RAWDEV(0, 0xf, 0), 0x0d);
y &= 0x0f;
y |= 0x40;
- pci_rawwrite_config8(PCI_DEV(0, 0xf, 0), 0x0d, y);
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0xf, 0), 0x0d, y);
#endif
#if 0
@@ -948,41 +948,41 @@ void hardwaremain(int boot_complete)
u8 i;
/* error form ---- but add the chance to resume
for(i=0;i<5;i++){
- pci_rawwrite_config8(PCI_DEV(0, 0, 0), i, d0f0pcitable[i+0xcb]);
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0, 0), i, d0f0pcitable[i+0xcb]);
}
-
+
*/
/* RO reg
for(i=0;i<5;i++){
- pci_rawwrite_config8(PCI_DEV(0, 0, 0), i+0xcb, d0f0pcitable[i]);
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0, 0), i+0xcb, d0f0pcitable[i]);
}
*/
-//boot ok, resume still err in linux
+//boot ok, resume still err in linux
#if 1
for (i = 0; i < 9; i++) {
- pci_rawwrite_config8(PCI_DEV(0, 0, 2), i + 0x50,
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0, 2), i + 0x50,
d0f2pcitable[i]);
}
//9 is warm reset reg, // boot err in coreboot
for (i = 10; i < 64; i++) {
- pci_rawwrite_config8(PCI_DEV(0, 0, 2), i + 0x50,
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0, 2), i + 0x50,
d0f2pcitable[i]);
}
//0x90 look d0f2 appendixA1 , if set this to 09 or 0b, then some ddr2 will crash.
for (i = 65; i < 113; i++) {
- pci_rawwrite_config8(PCI_DEV(0, 0, 2), i + 0x50,
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0, 2), i + 0x50,
d0f2pcitable[i]);
}
#endif
#ifdef OPTION_1
- pci_rawwrite_config8(PCI_DEV(0, 0, 2), 0x66, 0x09);
- pci_rawwrite_config8(PCI_DEV(0, 0, 2), 0x70, 0xdd);
- // pci_rawwrite_config8(PCI_DEV(0, 0, 2), 0x90, 0x09);
- pci_rawwrite_config8(PCI_DEV(0, 0, 2), 0x92, 0x40);
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0, 2), 0x66, 0x09);
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0, 2), 0x70, 0xdd);
+ // pci_rawwrite_config8(PCI_RAWDEV(0, 0, 2), 0x90, 0x09);
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0, 2), 0x92, 0x40);
#endif
@@ -991,63 +991,63 @@ for(i=0;i<5;i++){
#if 1
-//d0f3
+//d0f3
/* */
- // pci_rawwrite_config8(PCI_DEV(0, 0, 3), 0x86, 0x3b); setting, my lspci is 0x29
+ // pci_rawwrite_config8(PCI_RAWDEV(0, 0, 3), 0x86, 0x3b); setting, my lspci is 0x29
//set bit4 cause the ide not be found
-// pci_rawwrite_config8(PCI_DEV(0, 0, 3), 0x86, 0x2b);
+// pci_rawwrite_config8(PCI_RAWDEV(0, 0, 3), 0x86, 0x2b);
//set bit1 cause the ide not be found
-// pci_rawwrite_config8(PCI_DEV(0, 0, 3), 0x86, 0x29);
- pci_rawwrite_config8(PCI_DEV(0, 0, 3), 0x95, 0x05);
- pci_rawwrite_config8(PCI_DEV(0, 0, 3), 0x99, 0x12);
+// pci_rawwrite_config8(PCI_RAWDEV(0, 0, 3), 0x86, 0x29);
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0, 3), 0x95, 0x05);
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0, 3), 0x99, 0x12);
- pci_rawwrite_config8(PCI_DEV(0, 0, 3), 0xde, 0x00);
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0, 3), 0xde, 0x00);
#endif
-//boot ok, resume err in coreboot
+//boot ok, resume err in coreboot
#if 1
for (i = 0; i < 99; i++) {
- pci_rawwrite_config8(PCI_DEV(0, 0, 4), i + 0x8d,
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0, 4), i + 0x8d,
d0f4pcitable[i]);
}
#endif
#ifdef OPTION_1
- pci_rawwrite_config8(PCI_DEV(0, 0, 4), 0xe9, 0x90);
- pci_rawwrite_config8(PCI_DEV(0, 0, 4), 0xec, 0x0);
- pci_rawwrite_config8(PCI_DEV(0, 0, 4), 0xed, 0x0);
- pci_rawwrite_config8(PCI_DEV(0, 0, 4), 0xee, 0x0);
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0, 4), 0xe9, 0x90);
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0, 4), 0xec, 0x0);
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0, 4), 0xed, 0x0);
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0, 4), 0xee, 0x0);
#endif
#if 1
-//boot ok, resume still err in linux
+//boot ok, resume still err in linux
for (i = 0; i < 160; i++) {
- pci_rawwrite_config8(PCI_DEV(0, 0, 5), i + 0x60,
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0, 5), i + 0x60,
d0f5pcitable[i]);
}
for (i = 0; i < 144; i++) {
- pci_rawwrite_config8(PCI_DEV(0, 0, 7), i + 0x60,
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0, 7), i + 0x60,
d0f7pcitable[i]);
}
for (i = 0; i < 3; i++) {
- pci_rawwrite_config8(PCI_DEV(0, 1, 0), i + 0xb0,
+ pci_rawwrite_config8(PCI_RAWDEV(0, 1, 0), i + 0xb0,
d1f0pcitable[i]);
}
for (i = 0; i < 96; i++) {
- pci_rawwrite_config8(PCI_DEV(0, 0xc, 0), i + 0x40,
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0xc, 0), i + 0x40,
dcf0pcitable[i]);
}
#endif
#ifdef OPTION_1
- pci_rawwrite_config8(PCI_DEV(0, 0, 7), 0x61, 0x0);
- pci_rawwrite_config8(PCI_DEV(0, 0, 7), 0x63, 0x0);
- pci_rawwrite_config8(PCI_DEV(0, 0, 7), 0x76, 0xd0);
- pci_rawwrite_config8(PCI_DEV(0, 0xc, 0), 0x88, 0x81);
- pci_rawwrite_config8(PCI_DEV(0, 0xc, 0), 0x89, 0x01);
- pci_rawwrite_config8(PCI_DEV(0, 0xc, 0), 0x8A, 0x60);
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0, 7), 0x61, 0x0);
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0, 7), 0x63, 0x0);
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0, 7), 0x76, 0xd0);
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0xc, 0), 0x88, 0x81);
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0xc, 0), 0x89, 0x01);
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0xc, 0), 0x8A, 0x60);
#endif
//d15f0
@@ -1057,24 +1057,24 @@ for(i=0;i<5;i++){
#if 1
- pci_rawwrite_config8(PCI_DEV(0, 0x10, 0), 0x4a, 0xa2); // no affect.
- pci_rawwrite_config8(PCI_DEV(0, 0x10, 1), 0x4a, 0xa2);
- pci_rawwrite_config8(PCI_DEV(0, 0x10, 2), 0x4a, 0xa2);
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0x10, 0), 0x4a, 0xa2); // no affect.
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0x10, 1), 0x4a, 0xa2);
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0x10, 2), 0x4a, 0xa2);
//boot ok, resume still err in linux, and if disable USB, then all ok
// for(i=0;i<48;i++){
for (i = 0; i < 44; i++) {
- pci_rawwrite_config8(PCI_DEV(0, 0x10, 4), i + 0x40,
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0x10, 4), i + 0x40,
d10f4pcitable[i]);
}
#endif
//#ifdef NOOPTION_1
#if 0
- pci_rawwrite_config8(PCI_DEV(0, 0x10, 4), 0x6b, 0x01);
- pci_rawwrite_config8(PCI_DEV(0, 0x10, 4), 0x6d, 0x00);
- pci_rawwrite_config8(PCI_DEV(0, 0x10, 4), 0x6e, 0x08);
- pci_rawwrite_config8(PCI_DEV(0, 0x10, 4), 0x6f, 0x80);
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0x10, 4), 0x6b, 0x01);
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0x10, 4), 0x6d, 0x00);
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0x10, 4), 0x6e, 0x08);
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0x10, 4), 0x6f, 0x80);
#endif
@@ -1083,171 +1083,171 @@ for(i=0;i<5;i++){
//before (11.0)is add, s3 resume has already always dead in first resume(more frequenly), and sleep ok
// for(i=0;i<192;i++){
for (i = 0; i < 6; i++) {
- pci_rawwrite_config8(PCI_DEV(0, 0x11, 0), i + 0x40,
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
d11f0pcitable[i]);
}
//6 is uart and dvp vcp, will have // HAVE no com1 ,and no gui show,textmode ok ,s3 sleep ok, resume fail
//7-18 is my familar part
- for (i = 7; i < 18; i++) { //sleep ok ,resume sleep err 2
- pci_rawwrite_config8(PCI_DEV(0, 0x11, 0), i + 0x40,
+ for (i = 7; i < 18; i++) { //sleep ok ,resume sleep err 2
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
d11f0pcitable[i]);
}
- for (i = 18; i < 21; i++) { //sleep ok , sleep err 1, resume
- pci_rawwrite_config8(PCI_DEV(0, 0x11, 0), i + 0x40,
+ for (i = 18; i < 21; i++) { //sleep ok , sleep err 1, resume
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
d11f0pcitable[i]);
}
//0x55 56 57 irq intA#B#C# linkA#linkB#linkC#
for (i = 24; i < 27; i++) { //sleep ok , resume sleep err 1 resume 1
- pci_rawwrite_config8(PCI_DEV(0, 0x11, 0), i + 0x40,
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
d11f0pcitable[i]);
}
//5b port 80h
- pci_rawmodify_config8(PCI_DEV(0, 0x11, 0), 0x5b, 0x0, 0x08);
+ pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x5b, 0x0, 0x08);
// i++;
- // pci_rawwrite_config8(PCI_DEV(0, 0x11, 0), i+0x40, d11f0pcitable[i]);
+ // pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i+0x40, d11f0pcitable[i]);
for (i = 28; i < 72; i++) { //sleep ok , resume sleep err 1 , resume 1ci
- pci_rawwrite_config8(PCI_DEV(0, 0x11, 0), i + 0x40,
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
d11f0pcitable[i]);
}
//7273ACPI BASE
for (i = 74; i < 112; i++) { //boot ok, resume still err in linux
- pci_rawwrite_config8(PCI_DEV(0, 0x11, 0), i + 0x40,
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
d11f0pcitable[i]);
}
//B0B4B5 dvp vcp, if copy this ,then no uart, no gui(of unbuntu)
- // pci_rawwrite_config8(PCI_DEV(0, 0x11, 0), 0xb0, d11f0pcitable[112]);
- i = pci_rawread_config8(PCI_DEV(0, 17, 0), 0xB0);
+ // pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), 0xb0, d11f0pcitable[112]);
+ i = pci_rawread_config8(PCI_RAWDEV(0, 17, 0), 0xB0);
//multiplex with VCP
// i = i | 0x30;
i = i & 0xf7;
- pci_rawwrite_config8(PCI_DEV(0, 17, 0), 0xB0, i);
+ pci_rawwrite_config8(PCI_RAWDEV(0, 17, 0), 0xB0, i);
for (i = 113; i < 114; i++) { //boot ok, resume still err in linux
- pci_rawwrite_config8(PCI_DEV(0, 0x11, 0), i + 0x40,
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
d11f0pcitable[i]);
}
for (i = 115; i < 116; i++) { //boot ok, resume still err in linux
- pci_rawwrite_config8(PCI_DEV(0, 0x11, 0), i + 0x40,
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
d11f0pcitable[i]);
}
for (i = 118; i < 192; i++) { //boot ok, resume still err in linux
- pci_rawwrite_config8(PCI_DEV(0, 0x11, 0), i + 0x40,
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
d11f0pcitable[i]);
}
#endif
#ifdef NOOPTION_1
// for(i=0;i<192;i++){
for (i = 0; i < 6; i++) {
- pci_rawwrite_config8(PCI_DEV(0, 0x11, 0), i + 0x40,
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
OPTION_1_d11f0pcitable[i]);
}
//6 is uart and dvp vcp, will have // HAVE no com1 ,and no gui show,textmode ok ,s3 sleep ok, resume fail
//7-18 is my familar part
for (i = 7; i < 18; i++) { // sleep err 2
- pci_rawwrite_config8(PCI_DEV(0, 0x11, 0), i + 0x40,
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
OPTION_1_d11f0pcitable[i]);
}
for (i = 18; i < 21; i++) { //sleep ok , resume ???
- pci_rawwrite_config8(PCI_DEV(0, 0x11, 0), i + 0x40,
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
d11f0pcitable[i]);
}
//0x55 56 57 irq intA#B#C# linkA#linkB#linkC#
for (i = 24; i < 27; i++) { //sleep ok , resume ???
- pci_rawwrite_config8(PCI_DEV(0, 0x11, 0), i + 0x40,
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
d11f0pcitable[i]);
}
//5b port 80h
i++;
- pci_rawwrite_config8(PCI_DEV(0, 0x11, 0), i + 0x40,
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
OPTION_1_d11f0pcitable[i]);
for (i = 28; i < 72; i++) { //sleep ok , resume???
- pci_rawwrite_config8(PCI_DEV(0, 0x11, 0), i + 0x40,
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
OPTION_1_d11f0pcitable[i]);
}
//7273ACPI BASE
for (i = 74; i < 112; i++) { //boot ok, resume still err in linux
- pci_rawwrite_config8(PCI_DEV(0, 0x11, 0), i + 0x40,
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
OPTION_1_d11f0pcitable[i]);
}
//B0B4B5 dvp vcp, if copy this ,then no uart, no gui(of unbuntu)
- // pci_rawwrite_config8(PCI_DEV(0, 0x11, 0), 0xb0, OPTION_1_d11f0pcitable[112]);
- i = pci_rawread_config8(PCI_DEV(0, 17, 0), 0xB0);
+ // pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), 0xb0, OPTION_1_d11f0pcitable[112]);
+ i = pci_rawread_config8(PCI_RAWDEV(0, 17, 0), 0xB0);
//multiplex with VCP
// i = i | 0x30;
i = i & 0xf7;
- pci_rawwrite_config8(PCI_DEV(0, 17, 0), 0xB0, i);
+ pci_rawwrite_config8(PCI_RAWDEV(0, 17, 0), 0xB0, i);
for (i = 113; i < 114; i++) { //boot ok, resume still err in linux
- pci_rawwrite_config8(PCI_DEV(0, 0x11, 0), i + 0x40,
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
OPTION_1_d11f0pcitable[i]);
}
for (i = 115; i < 116; i++) { //boot ok, resume still err in linux
- pci_rawwrite_config8(PCI_DEV(0, 0x11, 0), i + 0x40,
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
OPTION_1_d11f0pcitable[i]);
}
for (i = 118; i < 192; i++) { //boot ok, resume still err in linux
- pci_rawwrite_config8(PCI_DEV(0, 0x11, 0), i + 0x40,
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
OPTION_1_d11f0pcitable[i]);
}
#endif
#if 1
- pci_rawwrite_config16(PCI_DEV(0, 0xf, 0), 0xBA, PCI_DEVICE_ID_VIA_VX855_IDE); //5324
- pci_rawwrite_config16(PCI_DEV(0, 0xf, 0), 0xBE,
+ pci_rawwrite_config16(PCI_RAWDEV(0, 0xf, 0), 0xBA, PCI_DEVICE_ID_VIA_VX855_IDE); //5324
+ pci_rawwrite_config16(PCI_RAWDEV(0, 0xf, 0), 0xBE,
PCI_DEVICE_ID_VIA_VX855_IDE);
- pci_rawwrite_config16(PCI_DEV(0, 0x11, 0), 0xA0,
+ pci_rawwrite_config16(PCI_RAWDEV(0, 0x11, 0), 0xA0,
PCI_VENDOR_ID_VIA);
- pci_rawwrite_config16(PCI_DEV(0, 0x11, 0), 0xA2, PCI_DEVICE_ID_VIA_VX855_LPC); //8353
- i = pci_rawread_config8(PCI_DEV(0, 0x11, 0), 0x79);
+ pci_rawwrite_config16(PCI_RAWDEV(0, 0x11, 0), 0xA2, PCI_DEVICE_ID_VIA_VX855_LPC); //8353
+ i = pci_rawread_config8(PCI_RAWDEV(0, 0x11, 0), 0x79);
i &= ~0x40;
i |= 0x40;
- pci_rawwrite_config8(PCI_DEV(0, 0x11, 0), 0x79, i);
- pci_rawwrite_config16(PCI_DEV(0, 0x11, 0), 0x72,
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), 0x79, i);
+ pci_rawwrite_config16(PCI_RAWDEV(0, 0x11, 0), 0x72,
PCI_DEVICE_ID_VIA_VX855_LPC);
//boot ok, resume still err in linux
for (i = 0; i < 192; i++) {
- pci_rawwrite_config8(PCI_DEV(0, 0x11, 7), i + 0x40,
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 7), i + 0x40,
d11f7pcitable[i]);
}
#endif
#ifdef OPTION_1
- pci_rawwrite_config8(PCI_DEV(0, 0x11, 7), 0x61, 0x2a);
- pci_rawwrite_config8(PCI_DEV(0, 0x11, 7), 0x63, 0xa0);
- pci_rawwrite_config8(PCI_DEV(0, 0x11, 7), 0x64, 0xaa);
- pci_rawwrite_config8(PCI_DEV(0, 0x11, 7), 0x84, 0x0);
- pci_rawwrite_config8(PCI_DEV(0, 0x11, 7), 0x88, 0x02);
- pci_rawwrite_config8(PCI_DEV(0, 0x11, 7), 0xe6, 0x3f);
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 7), 0x61, 0x2a);
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 7), 0x63, 0xa0);
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 7), 0x64, 0xaa);
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 7), 0x84, 0x0);
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 7), 0x88, 0x02);
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 7), 0xe6, 0x3f);
#endif
- pci_rawwrite_config8(PCI_DEV(0, 0x14, 0), 0x40, 0x20);
- pci_rawwrite_config8(PCI_DEV(0, 0x14, 0), 0x41, 0x31);
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0x14, 0), 0x40, 0x20);
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0x14, 0), 0x41, 0x31);
#ifdef OPTION_1
- pci_rawwrite_config8(PCI_DEV(0, 0x14, 0), 0x40, 0x00);
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0x14, 0), 0x40, 0x00);
#endif
@@ -1256,11 +1256,11 @@ for(i=0;i<5;i++){
u8 i911;
//disable CHB L.L
//set VGA memory selection
- i911 = pci_rawread_config8(PCI_DEV(0, 0x1, 0), 0xb0);
+ i911 = pci_rawread_config8(PCI_RAWDEV(0, 0x1, 0), 0xb0);
i911 &= 0xF8;
//ByteVal |= 0x03;
i911 |= 0x01;
- pci_rawwrite_config8(PCI_DEV(0, 0x1, 0), 0xb0, i911);
+ pci_rawwrite_config8(PCI_RAWDEV(0, 0x1, 0), 0xb0, i911);
#if 1
@@ -1290,8 +1290,8 @@ for(i=0;i<5;i++){
- //pci_rawmodify_config8(PCI_DEV(0, 0x10, 4), 0x04, 0x17, 0x17);//
-// pci_rawmodify_config8(PCI_DEV(0, 0x10, 4), 0x0c, 0x08, 0xff);///
+ //pci_rawmodify_config8(PCI_RAWDEV(0, 0x10, 4), 0x04, 0x17, 0x17);//
+// pci_rawmodify_config8(PCI_RAWDEV(0, 0x10, 4), 0x0c, 0x08, 0xff);///
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-24 02:40:39 +0000