diff options
Diffstat (limited to 'src/northbridge/via/cx700/early_smbus.c')
-rw-r--r-- | src/northbridge/via/cx700/early_smbus.c | 266 |
1 files changed, 266 insertions, 0 deletions
diff --git a/src/northbridge/via/cx700/early_smbus.c b/src/northbridge/via/cx700/early_smbus.c new file mode 100644 index 0000000000..4766e59a29 --- /dev/null +++ b/src/northbridge/via/cx700/early_smbus.c @@ -0,0 +1,266 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +// other bioses use this, too: +#define SMBUS_IO_BASE 0x0500 + +#define SMBHSTSTAT SMBUS_IO_BASE + 0x0 +#define SMBSLVSTAT SMBUS_IO_BASE + 0x1 +#define SMBHSTCTL SMBUS_IO_BASE + 0x2 +#define SMBHSTCMD SMBUS_IO_BASE + 0x3 +#define SMBXMITADD SMBUS_IO_BASE + 0x4 +#define SMBHSTDAT0 SMBUS_IO_BASE + 0x5 +#define SMBHSTDAT1 SMBUS_IO_BASE + 0x6 + +#define SMBBLKDAT SMBUS_IO_BASE + 0x7 +#define SMBSLVCTL SMBUS_IO_BASE + 0x8 +#define SMBTRNSADD SMBUS_IO_BASE + 0x9 +#define SMBSLVDATA SMBUS_IO_BASE + 0xa +#define SMLINK_PIN_CTL SMBUS_IO_BASE + 0xe +#define SMBUS_PIN_CTL SMBUS_IO_BASE + 0xf + +/* Define register settings */ +#define HOST_RESET 0xff +#define READ_CMD 0x01 // 1 in the 0 bit of SMBHSTADD states to READ + +#define SMBUS_TIMEOUT (100*1000*10) + +#define I2C_TRANS_CMD 0x40 +#define CLOCK_SLAVE_ADDRESS 0x69 + +#define SMBUS_DELAY() outb(0x80, 0x80) + +/* Debugging macros. */ +#if CONFIG_DEBUG_SMBUS +#define PRINT_DEBUG(x) print_debug(x) +#define PRINT_DEBUG_HEX16(x) print_debug_hex16(x) +#else +#define PRINT_DEBUG(x) +#define PRINT_DEBUG_HEX16(x) +#endif + +/* Internal functions */ +#if CONFIG_DEBUG_SMBUS +static void smbus_print_error(unsigned char host_status_register, int loops) +{ + /* Check if there actually was an error */ + if (host_status_register == 0x00 || host_status_register == 0x40 || + host_status_register == 0x42) + return; + print_err("SMBus Error: "); + print_err_hex8(host_status_register); + + print_err("\n"); + if (loops >= SMBUS_TIMEOUT) { + print_err("SMBus Timout\n"); + } + if (host_status_register & (1 << 4)) { + print_err("Interrup/SMI# was Failed Bus Transaction\n"); + } + if (host_status_register & (1 << 3)) { + print_err("Bus Error\n"); + } + if (host_status_register & (1 << 2)) { + print_err("Device Error\n"); + } + if (host_status_register & (1 << 1)) { + /* This isn't a real error... */ + print_debug("Interrupt/SMI# was Successful Completion\n"); + } + if (host_status_register & (1 << 0)) { + print_err("Host Busy\n"); + } +} +#endif + +static void smbus_wait_until_ready(void) +{ + int loops; + + loops = 0; + + /* Yes, this is a mess, but it's the easiest way to do it */ + while (((inb(SMBHSTSTAT) & 1) == 1) && (loops <= SMBUS_TIMEOUT)) { + SMBUS_DELAY(); + ++loops; + } +#if CONFIG_DEBUG_SMBUS + /* Some systems seem to have a flakey SMBus. No need to spew a lot of + * errors on those, once we know that SMBus access is principally + * working. + */ + smbus_print_error(inb(SMBHSTSTAT), loops); +#endif +} + +static void smbus_reset(void) +{ + outb(HOST_RESET, SMBHSTSTAT); +} + +/* Public functions */ +static void set_ics_data(unsigned char dev, int data, char len) +{ + //int i; + smbus_reset(); + /* clear host data port */ + outb(0x00, SMBHSTDAT0); + SMBUS_DELAY(); + smbus_wait_until_ready(); + + /* read to reset block transfer counter */ + inb(SMBHSTCTL); + + /* fill blocktransfer array */ + if (dev == 0xd2) { + //char d2_data[] = {0x0d,0x00,0x3f,0xcd,0x7f,0xbf,0x1a,0x2a,0x01,0x0f,0x0b,0x00,0x8d,0x9b}; + outb(0x0d, SMBBLKDAT); + outb(0x00, SMBBLKDAT); + outb(0x3f, SMBBLKDAT); + outb(0xcd, SMBBLKDAT); + outb(0x7f, SMBBLKDAT); + outb(0xbf, SMBBLKDAT); + outb(0x1a, SMBBLKDAT); + outb(0x2a, SMBBLKDAT); + outb(0x01, SMBBLKDAT); + outb(0x0f, SMBBLKDAT); + outb(0x0b, SMBBLKDAT); + outb(0x80, SMBBLKDAT); + outb(0x8d, SMBBLKDAT); + outb(0x9b, SMBBLKDAT); + } else { + //char d4_data[] = {0x08,0xff,0x3f,0x00,0x00,0xff,0xff,0xff,0xff}; + outb(0x08, SMBBLKDAT); + outb(0xff, SMBBLKDAT); + outb(0x3f, SMBBLKDAT); + outb(0x00, SMBBLKDAT); + outb(0x00, SMBBLKDAT); + outb(0xff, SMBBLKDAT); + outb(0xff, SMBBLKDAT); + outb(0xff, SMBBLKDAT); + outb(0xff, SMBBLKDAT); + } + + //for (i=0; i < len; i++) + // outb(data[i],SMBBLKDAT); + + outb(dev, SMBXMITADD); + outb(0, SMBHSTCMD); + outb(len, SMBHSTDAT0); + outb(0x74, SMBHSTCTL); + + SMBUS_DELAY(); + + smbus_wait_until_ready(); + + smbus_reset(); + +} + +static unsigned int get_spd_data(const struct mem_controller *ctrl, unsigned int dimm, + unsigned int offset) +{ + unsigned int val, addr; + + smbus_reset(); + + /* clear host data port */ + outb(0x00, SMBHSTDAT0); + SMBUS_DELAY(); + smbus_wait_until_ready(); + + /* Fetch the SMBus address of the SPD ROM from + * the ctrl struct in romstage.c in case they are at + * non-standard positions. + * SMBus Address shifted by 1 + */ + addr = (ctrl->channel0[dimm]) << 1; + + outb(addr | 0x1, SMBXMITADD); + outb(offset, SMBHSTCMD); + outb(0x48, SMBHSTCTL); + + SMBUS_DELAY(); + + smbus_wait_until_ready(); + + val = inb(SMBHSTDAT0); + smbus_reset(); + return val; +} + +static void enable_smbus(void) +{ + device_t dev; + + /* The CX700 ISA Bridge (0x1106, 0x8324) is hardcoded to this location, + * no need to probe. + */ + dev = PCI_DEV(0, 17, 0); + + /* SMBus Clock Select: Divider fof 14.318MHz */ + pci_write_config8(dev, 0x94, 0x20); + + /* SMBus I/O Base, enable SMBus */ + pci_write_config16(dev, 0xd0, SMBUS_IO_BASE | 1); + + /* SMBus Clock from 128K Source, Enable SMBus Host Controller */ + pci_write_config8(dev, 0xd2, 0x05); + + /* Enable I/O decoding */ + pci_write_config16(dev, 0x04, 0x0003); + + /* Setup clock chips */ + set_ics_data(0xd2, 0, 14); + set_ics_data(0xd4, 0, 9); +} + +/* Debugging Function */ +#if CONFIG_DEBUG_SMBUS +static void dump_spd_data(const struct mem_controller *ctrl) +{ + int dimm, offset, regs; + unsigned int val; + + for (dimm = 0; dimm < DIMM_SOCKETS; dimm++) { + print_debug("SPD Data for DIMM "); + print_debug_hex8(dimm); + print_debug("\n"); + + val = get_spd_data(ctrl, dimm, 0); + if (val == 0xff) { + regs = 256; + } else if (val == 0x80) { + regs = 128; + } else { + print_debug("No DIMM present\n"); + regs = 0; + } + for (offset = 0; offset < regs; offset++) { + print_debug(" Offset "); + print_debug_hex8(offset); + print_debug(" = 0x"); + print_debug_hex8(get_spd_data(ctrl, dimm, offset)); + print_debug("\n"); + } + } +} +#else +#define dump_spd_data(ctrl) +#endif |