1 files changed, 102 insertions, 0 deletions
diff --git a/src/northbridge/via/cx700/early_serial.c b/src/northbridge/via/cx700/early_serial.c
new file mode 100644
index 0000000000..3f5020f670
--- /dev/null
+++ b/src/northbridge/via/cx700/early_serial.c
@@ -0,0 +1,102 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/*
+ * Enable the serial devices on the VIA CX700
+ */
+
+#include <arch/romcc_io.h>
+
+static void cx700_writepnpaddr(u8 val)
+{
+	outb(val, 0x2e);
+	outb(val, 0xeb);
+}
+
+static void cx700_writepnpdata(u8 val)
+{
+	outb(val, 0x2f);
+	outb(val, 0xeb);
+}
+
+static void cx700_writesiobyte(u16 reg, u8 val)
+{
+	outb(val, reg);
+}
+
+static void cx700_writesioword(u16 reg, u16 val)
+{
+	outw(val, reg);
+}
+
+static void enable_cx700_serial(void)
+{
+	outb(6, 0x80);
+
+	// WTH?
+	outb(0x03, 0x22);
+
+	// Set UART1 I/O Base Address
+	pci_write_config8(PCI_DEV(0, 17, 0), 0xb4, 0x7e);
+
+	// UART1 Enable
+	pci_write_config8(PCI_DEV(0, 17, 0), 0xb0, 0x10);
+
+	// turn on pnp
+	cx700_writepnpaddr(0x87);
+	cx700_writepnpaddr(0x87);
+	// now go ahead and set up com1.
+	// set address
+	cx700_writepnpaddr(0x7);
+	cx700_writepnpdata(0x2);
+	// enable serial out
+	cx700_writepnpaddr(0x30);
+	cx700_writepnpdata(0x1);
+	// serial port 1 base address (FEh)
+	cx700_writepnpaddr(0x60);
+	cx700_writepnpdata(0xfe);
+	// serial port 1 IRQ (04h)
+	cx700_writepnpaddr(0x70);
+	cx700_writepnpdata(0x4);
+	// serial port 1 control
+	cx700_writepnpaddr(0xf0);
+	cx700_writepnpdata(0x2);
+	// turn of pnp
+	cx700_writepnpaddr(0xaa);
+
+	// XXX This part should be fully taken care of by
+	// src/pc80/serial.c:uart_init
+
+	// set up reg to set baud rate.
+	cx700_writesiobyte(0x3fb, 0x80);
+	// Set 115 kb
+	cx700_writesioword(0x3f8, 1);
+	// Set 9.6 kb
+	// cx700_writesioword(0x3f8, 12)
+	// now set no parity, one stop, 8 bits
+	cx700_writesiobyte(0x3fb, 3);
+	// now turn on RTS, DRT
+	cx700_writesiobyte(0x3fc, 3);
+	// Enable interrupts
+	cx700_writesiobyte(0x3f9, 0xf);
+	// should be done. Dump a char for fun.
+	cx700_writesiobyte(0x3f8, 48);
+
+	outb(7, 0x80);
+}