summaryrefslogtreecommitdiff
path: root/src/northbridge/via/cn400
diff options
context:
space:
mode:
Diffstat (limited to 'src/northbridge/via/cn400')
-rw-r--r--src/northbridge/via/cn400/northbridge.c6
-rw-r--r--src/northbridge/via/cn400/raminit.c180
-rw-r--r--src/northbridge/via/cn400/vga.c4
3 files changed, 95 insertions, 95 deletions
diff --git a/src/northbridge/via/cn400/northbridge.c b/src/northbridge/via/cn400/northbridge.c
index 80dcc8d1a9..3fbc358de5 100644
--- a/src/northbridge/via/cn400/northbridge.c
+++ b/src/northbridge/via/cn400/northbridge.c
@@ -45,7 +45,7 @@ static void memctrl_init(device_t dev)
/* vlink mirror */
vlink_dev = dev_find_device(PCI_VENDOR_ID_VIA,
PCI_DEVICE_ID_VIA_CN400_VLINK, 0);
-
+
/* Setup Low Memory Top */
/* 0x47 == HA(32:25) */
/* 0x84/85 == HA(31:20) << 4 | DRAM Granularity */
@@ -104,7 +104,7 @@ static void memctrl_init(device_t dev)
pci_write_config8(vlink_dev, 0x63, shadowreg);
/* Activate VGA Frame Buffer */
-
+
reg8 = pci_read_config8(dev, 0xA0);
reg8 |= 0x01;
pci_write_config8(dev, 0xA0, reg8);
@@ -268,7 +268,7 @@ static void cn400_domain_set_resources(device_t dev)
(tolmk - 768 - CONFIG_VIDEO_MB * 1024));
}
assign_resources(&dev->link[0]);
-
+
printk(BIOS_SPEW, "Leaving %s.\n", __func__);
}
diff --git a/src/northbridge/via/cn400/raminit.c b/src/northbridge/via/cn400/raminit.c
index a0b3aab1c5..7081c78744 100644
--- a/src/northbridge/via/cn400/raminit.c
+++ b/src/northbridge/via/cn400/raminit.c
@@ -19,7 +19,7 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-/*
+/*
Automatically detect and set up ddr dram on the CN400 chipset.
Assumes DDR400 memory as no attempt is made to clock
the chipset down if slower memory is installed.
@@ -33,9 +33,9 @@
#include <cpu/x86/mtrr.h>
#include "cn400.h"
-static void dimm_read(unsigned long bank,unsigned long x)
+static void dimm_read(unsigned long bank,unsigned long x)
{
- //unsigned long eax;
+ //unsigned long eax;
volatile unsigned long y;
//eax = x;
y = * (volatile unsigned long *) (x+ bank) ;
@@ -50,7 +50,7 @@ static void print_val(char *str, int val)
}
/**
- * Configure the bus between the CPU and the northbridge. This might be able to
+ * Configure the bus between the CPU and the northbridge. This might be able to
* be moved to post-ram code in the future. For the most part, these registers
* should not be messed around with. These are too complex to explain short of
* copying the datasheets into the comments, but most of these values are from
@@ -66,27 +66,27 @@ static void c3_cpu_setup(device_t dev)
/* Host bus interface registers (D0F2 0x50-0x67) */
/* Taken from CN700 and updated from running CN400 */
uint8_t reg8;
-
+
/* Host Bus I/O Circuit (see datasheet) */
/* Host Address Pullup/down Driving */
pci_write_config8(dev, 0x70, 0x33);
pci_write_config8(dev, 0x71, 0x44);
pci_write_config8(dev, 0x72, 0x33);
pci_write_config8(dev, 0x73, 0x44);
-
+
/* Output Delay Stagger Control */
pci_write_config8(dev, 0x74, 0x70);
-
+
/* AGTL+ I/O Circuit */
pci_write_config8(dev, 0x75, 0x08);
-
+
/* AGTL+ Compensation Status */
pci_write_config8(dev, 0x76, 0x74);
-
+
/* AGTL+ Auto Compensation Offest */
pci_write_config8(dev, 0x77, 0x00);
pci_write_config8(dev, 0x78, 0x94);
-
+
/* Request phase control */
pci_write_config8(dev, 0x50, 0xA8);
@@ -94,71 +94,71 @@ static void c3_cpu_setup(device_t dev)
pci_write_config8(dev, 0x60, 0x00);
pci_write_config8(dev, 0x61, 0x00);
pci_write_config8(dev, 0x62, 0x00);
-
+
/* QW DRDY# Timing Control */
pci_write_config8(dev, 0x63, 0x00);
pci_write_config8(dev, 0x64, 0x00);
pci_write_config8(dev, 0x65, 0x00);
-
+
/* Read Line Burst DRDY# Timing Control */
pci_write_config8(dev, 0x66, 0x00);
pci_write_config8(dev, 0x67, 0x00);
-
+
/* CPU Interface Control */
pci_write_config8(dev, 0x51, 0xFE);
pci_write_config8(dev, 0x52, 0xEF);
-
+
/* Arbitration */
pci_write_config8(dev, 0x53, 0x88);
-
+
/* Write Policy & Reorder Latecy */
pci_write_config8(dev, 0x56, 0x00);
-
+
/* Delivery-Trigger Control */
pci_write_config8(dev, 0x58, 0x00);
-
+
/* IPI Control */
pci_write_config8(dev, 0x59, 0x30);
-
+
/* CPU Misc Control */
pci_write_config8(dev, 0x5C, 0x00);
-
+
/* Write Policy */
pci_write_config8(dev, 0x5d, 0xb2);
-
+
/* Bandwidth Timer */
pci_write_config8(dev, 0x5e, 0x88);
-
+
/* CPU Miscellaneous Control */
pci_write_config8(dev, 0x5f, 0xc7);
-
+
/* CPU Miscellaneous Control */
pci_write_config8(dev, 0x55, 0x28);
pci_write_config8(dev, 0x57, 0x69);
-
+
/* CPU Host Bus Final Setup */
reg8 = pci_read_config8(dev, 0x54);
reg8 |= 0x08;
pci_write_config8(dev, 0x54, reg8);
}
-
-static void ddr_ram_setup(void)
+
+static void ddr_ram_setup(void)
{
uint8_t b, c, bank, ma;
uint16_t i;
unsigned long bank_address;
-
-
- print_debug("CN400 RAM init starting\n");
+
+
+ print_debug("CN400 RAM init starting\n");
pci_write_config8(ctrl.d0f7, 0x75, 0x08);
-
-
+
+
/* No Interleaving or Multi Page */
pci_write_config8(ctrl.d0f3, 0x69, 0x00);
- pci_write_config8(ctrl.d0f3, 0x6b, 0x10);
-
+ pci_write_config8(ctrl.d0f3, 0x6b, 0x10);
+
/*
DRAM MA Map Type Device 0 Fn3 Offset 50-51
@@ -186,14 +186,14 @@ static void ddr_ram_setup(void)
bank = 0x40;
b = smbus_read_byte(0x50, SPD_NUM_ROWS);
//print_val("\nNumber of Rows ", b);
-
+
if( b >= 0x0d ){ // 256/512Mb
-
+
if (b == 0x0e)
bank = 0x48;
else
bank = 0x44;
-
+
/*
Read SPD byte 13, Primary DRAM width.
*/
@@ -205,7 +205,7 @@ static void ddr_ram_setup(void)
/*
Read SPD byte 4, Number of column addresses.
- */
+ */
b = smbus_read_byte(0x50, SPD_NUM_COLUMNS);
//print_val("\nNo Columns ",b);
if( b == 10 || b == 11 || b == 12) c |= 0x60; // 10/11 bit col addr
@@ -240,11 +240,11 @@ static void ddr_ram_setup(void)
//c = 0;
b = smbus_read_byte(0x50, SPD_DENSITY_OF_EACH_ROW_ON_MODULE);
if( b & 0x02 )
- {
+ {
c = 0x40; // 2GB
bank |= 0x02;
}
- else if( b & 0x01)
+ else if( b & 0x01)
{
c = 0x20; // 1GB
if (bank == 0x48) bank |= 0x01;
@@ -255,12 +255,12 @@ static void ddr_ram_setup(void)
c = 0x10; // 512MB
if (bank == 0x44) bank |= 0x02;
}
- else if( b & 0x40)
- {
+ else if( b & 0x40)
+ {
c = 0x08; // 256MB
if (bank == 0x44) bank |= 0x01;
else bank |= 0x03;
- }
+ }
else if( b & 0x20)
{
c = 0x04; // 128MB
@@ -276,7 +276,7 @@ static void ddr_ram_setup(void)
// set bank zero size
pci_write_config8(ctrl.d0f3, 0x40, c);
-
+
// SPD byte 5 # of physical banks
b = smbus_read_byte(0x50, SPD_NUM_DIMM_BANKS);
@@ -288,7 +288,7 @@ static void ddr_ram_setup(void)
}
/* else
{
- die("Only a single DIMM is supported by EPIA-N(L)\n");
+ die("Only a single DIMM is supported by EPIA-N(L)\n");
}
*/
// set banks 1,2,3...
@@ -299,13 +299,13 @@ static void ddr_ram_setup(void)
pci_write_config8(ctrl.d0f3, 0x45,c);
pci_write_config8(ctrl.d0f3, 0x46,c);
pci_write_config8(ctrl.d0f3, 0x47,c);
-
+
/* Top Rank Address Mirrored to the South Bridge */
/* over the VLink */
pci_write_config8(ctrl.d0f7, 0x57, (c << 1));
ma = bank;
-
+
/* Read SPD byte 18 CAS Latency */
b = smbus_read_byte(0x50, SPD_ACCEPTABLE_CAS_LATENCIES);
/* print_debug("\nCAS Supported ");
@@ -322,7 +322,7 @@ static void ddr_ram_setup(void)
print_val("\nCycle time at CL X-0.5 (nS)", c);
c = smbus_read_byte(0x50, SPD_SDRAM_CYCLE_TIME_3RD);
print_val("\nCycle time at CL X-1 (nS)", c);
-*/
+*/
/* Scaling of Cycle Time SPD data */
/* 7 4 3 0 */
/* ns x0.1ns */
@@ -353,7 +353,7 @@ static void ddr_ram_setup(void)
c = 0x10;
}
}
- }
+ }
/* Scale DRAM Cycle Time to tRP/tRCD */
/* 7 2 1 0 */
@@ -384,7 +384,7 @@ static void ddr_ram_setup(void)
*/
b = smbus_read_byte(0x50, SPD_MIN_ROW_PRECHARGE_TIME);
-
+
//print_val("\ntRP ",b);
if ( b >= (5 * bank)) {
c |= 0x03; // set tRP = 5T
@@ -425,16 +425,16 @@ static void ddr_ram_setup(void)
if ( b >= (9 * bank)) c |= 0xC0; // set tRAS = 9T
else if ( b >= (8 * bank)) c |= 0x80; // set tRAS = 8T
else if ( b >= (7 * bank)) c |= 0x40; // set tRAS = 7T
-
+
/* Write DRAM Timing All Banks I */
pci_write_config8(ctrl.d0f3, 0x56, c);
-
+
/* TWrite DRAM Timing All Banks II */
pci_write_config8(ctrl.d0f3, 0x57, 0x1a);
-
+
/* DRAM arbitration timer */
pci_write_config8(ctrl.d0f3, 0x65, 0x99);
-
+
/*
DRAM Clock Device 0 Fn 3 Offset 68
*/
@@ -453,7 +453,7 @@ static void ddr_ram_setup(void)
/* 133MHz FSB / DDR333. See also c3_cpu_setup */
pci_write_config8(ctrl.d0f3, 0x68, 0x81);
}
- else
+ else
{
/* DRAM DDR Control Alert! Alert! This hardwires to */
/* 133MHz FSB / DDR266. See also c3_cpu_setup */
@@ -475,7 +475,7 @@ static void ddr_ram_setup(void)
/* 4-Way Interleave With Multi-Paging (From Running System)*/
pci_write_config8(ctrl.d0f3, 0x69, c);
-
+
/*DRAM Controller Internal Options */
pci_write_config8(ctrl.d0f3, 0x54, 0x01);
@@ -484,7 +484,7 @@ static void ddr_ram_setup(void)
/* DRAM Control */
pci_write_config8(ctrl.d0f3, 0x6e, 0x80);
-
+
/* Disable refresh for now */
pci_write_config8(ctrl.d0f3, 0x6a, 0x00);
@@ -497,7 +497,7 @@ static void ddr_ram_setup(void)
/* DRAM Bus Turn-Around Setting */
pci_write_config8(ctrl.d0f3, 0x60, 0x01);
-
+
/* Disable DRAM refresh */
pci_write_config8(ctrl.d0f3,0x6a,0x0);
@@ -524,7 +524,7 @@ static void ddr_ram_setup(void)
c = b | 0x40;
pci_write_config8(ctrl.d0f3, 0xb0, c);
-
+
/* Set RAM Decode method */
pci_write_config8(ctrl.d0f3, 0x55, 0x0a);
@@ -542,14 +542,14 @@ static void ddr_ram_setup(void)
CPU FSB Operating Frequency (bits 7:5)
000 : 100MHz 001 : 133MHz
- 010 : 200MHz
+ 010 : 200MHz
011->111 : Reserved
-
+
SDRAM BL8 (4)
-
+
Don't change Frequency from power up defaults
This seems to lockup the RAM interface
- */
+ */
c = pci_read_config8(ctrl.d0f2, 0x54);
c |= 0x10;
pci_write_config8(ctrl.d0f2, 0x54, c);
@@ -566,7 +566,7 @@ static void ddr_ram_setup(void)
c = pci_read_config8(ctrl.d0f3, DRAM_MISC_CTL);
c &= 0xf8; /* Clear bits 2-0. */
c |= RAM_COMMAND_NOP;
- pci_write_config8(ctrl.d0f3, DRAM_MISC_CTL, c);
+ pci_write_config8(ctrl.d0f3, DRAM_MISC_CTL, c);
/* read a double word from any address of the dimm */
dimm_read(bank_address,0x1f000);
@@ -576,7 +576,7 @@ static void ddr_ram_setup(void)
c = pci_read_config8(ctrl.d0f3, DRAM_MISC_CTL);
c &= 0xf8; /* Clear bits 2-0. */
c |= RAM_COMMAND_PRECHARGE;
- pci_write_config8(ctrl.d0f3, DRAM_MISC_CTL, c);
+ pci_write_config8(ctrl.d0f3, DRAM_MISC_CTL, c);
dimm_read(bank_address,0x1f000);
@@ -584,8 +584,8 @@ static void ddr_ram_setup(void)
c = pci_read_config8(ctrl.d0f3, DRAM_MISC_CTL);
c &= 0xf8; /* Clear bits 2-0. */
c |= RAM_COMMAND_MSR_LOW;
- pci_write_config8(ctrl.d0f3, DRAM_MISC_CTL, c);
- /* TODO: Bank Addressing for Different Numbers of Row Addresses */
+ pci_write_config8(ctrl.d0f3, DRAM_MISC_CTL, c);
+ /* TODO: Bank Addressing for Different Numbers of Row Addresses */
dimm_read(bank_address,0x2000);
udelay(1);
dimm_read(bank_address,0x800);
@@ -595,14 +595,14 @@ static void ddr_ram_setup(void)
c = pci_read_config8(ctrl.d0f3, DRAM_MISC_CTL);
c &= 0xf8; /* Clear bits 2-0. */
c |= RAM_COMMAND_PRECHARGE;
- pci_write_config8(ctrl.d0f3, DRAM_MISC_CTL, c);
+ pci_write_config8(ctrl.d0f3, DRAM_MISC_CTL, c);
dimm_read(bank_address,0x1f200);
/* CBR Cycle Enable */
c = pci_read_config8(ctrl.d0f3, DRAM_MISC_CTL);
c &= 0xf8; /* Clear bits 2-0. */
c |= RAM_COMMAND_CBR;
- pci_write_config8(ctrl.d0f3, DRAM_MISC_CTL, c);
+ pci_write_config8(ctrl.d0f3, DRAM_MISC_CTL, c);
/* Read 8 times */
for (c=0;c<8;c++) {
@@ -614,10 +614,10 @@ static void ddr_ram_setup(void)
c = pci_read_config8(ctrl.d0f3, DRAM_MISC_CTL);
c &= 0xf8; /* Clear bits 2-0. */
c |= RAM_COMMAND_MSR_LOW;
- pci_write_config8(ctrl.d0f3, DRAM_MISC_CTL, c);
+ pci_write_config8(ctrl.d0f3, DRAM_MISC_CTL, c);
-/*
+/*
Mode Register Definition
with adjustement so that address calculation is correct - 64 bit technology, therefore
a0-a2 refer to byte within a 64 bit long word, and a3 is the first address line presented
@@ -626,9 +626,9 @@ static void ddr_ram_setup(void)
MR[9-7] CAS Latency
MR[6] Burst Type 0 = sequential, 1 = interleaved
MR[5-3] burst length 001 = 2, 010 = 4, 011 = 8, others reserved
- MR[0-2] dont care
+ MR[0-2] dont care
- CAS Latency
+ CAS Latency
000 reserved
001 reserved
010 2
@@ -657,24 +657,24 @@ static void ddr_ram_setup(void)
c &= 0xf8; /* Clear bits 2-0. */
c |= RAM_COMMAND_NORMAL;
pci_write_config8(ctrl.d0f3, DRAM_MISC_CTL, c);
-
+
bank_address = pci_read_config8(ctrl.d0f3,0x40+bank) * 0x2000000;
} // end of for each bank
-
+
/* Set DRAM DQS Output Control */
pci_write_config8(ctrl.d0f3, 0x79, 0x11);
-
+
/* Set DQS A/B Input delay to defaults */
pci_write_config8(ctrl.d0f3, 0x7A, 0xA1);
- pci_write_config8(ctrl.d0f3, 0x7B, 0x62);
+ pci_write_config8(ctrl.d0f3, 0x7B, 0x62);
/* DQS Duty Cycle Control */
pci_write_config8(ctrl.d0f3, 0xED, 0x11);
/* SPD byte 5 # of physical banks */
b = smbus_read_byte(0x50, SPD_NUM_DIMM_BANKS) -1;
-
+
/* determine low bond */
if( b == 2)
bank_address = pci_read_config8(ctrl.d0f3,0x40) * 0x2000000;
@@ -720,10 +720,10 @@ static void ddr_ram_setup(void)
// if everything verified then found low bond
break;
-
+
}
- print_val("\nLow Bond ",i);
- if( i < 0xff ){
+ print_val("\nLow Bond ",i);
+ if( i < 0xff ){
c = i++;
for( ; i <0xff ; i++){
pci_write_config8(ctrl.d0f3,0x70, i);
@@ -774,24 +774,24 @@ static void ddr_ram_setup(void)
/* Set DQS ChA Data Output Delay to the default */
pci_write_config8(ctrl.d0f3, 0x71, 0x65);
-
+
/* Set Ch B DQS Output Delays */
pci_write_config8(ctrl.d0f3, 0x72, 0x2a);
pci_write_config8(ctrl.d0f3, 0x73, 0x29);
-
+
pci_write_config8(ctrl.d0f3, 0x78, 0x03);
/* Mystery Value */
pci_write_config8(ctrl.d0f3, 0x67, 0x50);
-
+
/* Enable Toggle Limiting */
pci_write_config8(ctrl.d0f4, 0xA3, 0x80);
-
+
/*
DRAM refresh rate Device 0 F3 Offset 6a
- TODO :: Fix for different DRAM technologies
- other than 512Mb and DRAM Freq
- Units of 16 DRAM clock cycles - 1.
+ TODO :: Fix for different DRAM technologies
+ other than 512Mb and DRAM Freq
+ Units of 16 DRAM clock cycles - 1.
*/
//c = pci_read_config8(ctrl.d0f3, 0x68);
//c &= 0x07;
@@ -799,13 +799,13 @@ static void ddr_ram_setup(void)
//print_val("SPD_REFRESH = ", b);
pci_write_config8(ctrl.d0f3,0x6a,0x65);
-
+
/* SMM and APIC decoding, we do not use SMM */
b = 0x29;
pci_write_config8(ctrl.d0f3, 0x86, b);
/* SMM and APIC decoding mirror */
pci_write_config8(ctrl.d0f7, 0xe6, b);
-
+
/* Open Up the Rest of the Shadow RAM */
pci_write_config8(ctrl.d0f3,0x80,0xff);
pci_write_config8(ctrl.d0f3,0x81,0xff);
@@ -816,10 +816,10 @@ static void ddr_ram_setup(void)
pci_write_config8(ctrl.d0f7,0x76,0x50);
pci_write_config8(ctrl.d0f7,0x71,0xc8);
-
+
/* VGA device. */
pci_write_config16(ctrl.d0f3, 0xa0, (1 << 15));
pci_write_config16(ctrl.d0f3, 0xa4, 0x0010);
print_debug("CN400 raminit.c done\n");
-}
+}
diff --git a/src/northbridge/via/cn400/vga.c b/src/northbridge/via/cn400/vga.c
index cf9c54be23..511079b03a 100644
--- a/src/northbridge/via/cn400/vga.c
+++ b/src/northbridge/via/cn400/vga.c
@@ -62,7 +62,7 @@ static int via_cn400_int15_handler(struct eregs *regs)
case 0x5f02:
regs->eax=0x5f;
regs->ebx= (regs->ebx & 0xffff0000) | 2;
- regs->ecx= (regs->ecx & 0xffff0000) | 0x401; // PAL + crt only
+ regs->ecx= (regs->ecx & 0xffff0000) | 0x401; // PAL + crt only
regs->edx= (regs->edx & 0xffff0000) | 0; // TV Layout - default
res=0;
break;
@@ -70,7 +70,7 @@ static int via_cn400_int15_handler(struct eregs *regs)
regs->eax=0x860f;
break;
default:
- printk(BIOS_DEBUG, "Unknown INT15 function %04x!\n",
+ printk(BIOS_DEBUG, "Unknown INT15 function %04x!\n",
regs->eax & 0xffff);
break;
}
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 14:33:09 +0000