summaryrefslogtreecommitdiff
path: root/src/northbridge/intel
diff options
context:
space:
mode:
Diffstat (limited to 'src/northbridge/intel')
-rw-r--r--src/northbridge/intel/e7501/northbridge.c340
1 files changed, 76 insertions, 264 deletions
diff --git a/src/northbridge/intel/e7501/northbridge.c b/src/northbridge/intel/e7501/northbridge.c
index 6b35eaf720..5922a1f34e 100644
--- a/src/northbridge/intel/e7501/northbridge.c
+++ b/src/northbridge/intel/e7501/northbridge.c
@@ -9,113 +9,8 @@
#include <string.h>
#include <bitops.h>
#include "chip.h"
-#if 0
-struct mem_range *sizeram(void)
-{
- static struct mem_range mem[4];
- /* the units of tolm are 64 KB */
- /* the units of drb16 are 64 MB */
- uint16_t tolm, remapbase, remaplimit, drb16;
- uint16_t tolm_r, remapbase_r, remaplimit_r;
- uint8_t drb;
- int remap_high;
- device_t dev;
-
- dev = dev_find_slot(0, 0); // d0f0
- if (!dev) {
- printk_err("Cannot find PCI: 0:0\n");
- return 0;
- }
-
- /* Calculate and report the top of low memory and
- * any remapping.
- */
- /* Test if the remap memory high option is set */
- remap_high = 0;
-// if(get_option(&remap_high, "remap_memory_high")){
-// remap_high = 0;
-// }
- printk_debug("remap_high is %d\n", remap_high);
- /* get out the value of the highest DRB. This tells the end of
- * physical memory. The units are ticks of 64 MB i.e. 1 means
- * 64 MB.
- */
- drb = pci_read_config8(dev, 0x67);
- drb16 = (uint16_t)drb;
- if(remap_high && (drb16 > 0x08)) {
- /* We only come here if we have at least 512MB of memory,
- * so it is safe to hard code tolm.
- * 0x2000 means 512MB
- */
-
- tolm = 0x2000;
- /* i.e 0x40 * 0x40 is 0x1000 which is 4 GB */
- if(drb16 > 0x0040) {
- /* There is more than 4GB of memory put
- * the remap window at the end of ram.
- */
- remapbase = drb16;
- remaplimit = remapbase + 0x38;
- }
- else {
- remapbase = 0x0040;
- remaplimit = remapbase + (drb16-8);
- }
- }
- else {
- tolm = (uint16_t)((dev_root.resource[1].base >> 16)&0x0f800);
- if((tolm>>8) >= (drb16<<2)) {
- tolm = (drb16<<10);
- remapbase = 0x3ff;
- remaplimit = 0;
- }
- else {
- remapbase = drb16;
- remaplimit = remapbase + ((0x0040-(tolm>>10))-1);
- }
- }
- /* Write the ram configruation registers,
- * preserving the reserved bits.
- */
- tolm_r = pci_read_config16(dev, 0xc4);
- tolm |= (tolm_r & 0x7ff);
- pci_write_config16(dev, 0xc4, tolm);
- remapbase_r = pci_read_config16(dev, 0xc6);
- remapbase |= (remapbase_r & 0xfc00);
- pci_write_config16(dev, 0xc6, remapbase);
- remaplimit_r = pci_read_config16(dev, 0xc8);
- remaplimit |= (remaplimit_r & 0xfc00);
- pci_write_config16(dev, 0xc8, remaplimit);
-
-#if 0
- printk_debug("mem info tolm = %x, drb = %x, pci_memory_base = %x, remap = %x-%x\n",tolm,drb,pci_memory_base,remapbase,remaplimit);
-#endif
-
- mem[0].basek = 0;
- mem[0].sizek = 640;
- mem[1].basek = 768;
- /* Convert size in 64K bytes to size in K bytes */
- mem[1].sizek = (tolm << 6) - mem[1].basek;
- mem[2].basek = 0;
- mem[2].sizek = 0;
- if ((drb << 16) > (tolm << 6)) {
- /* We don't need to consider the remap window
- * here because we put it immediately after the
- * rest of ram.
- * All we must do is calculate the amount
- * of unused memory and report it at 4GB.
- */
- mem[2].basek = 4096*1024;
- mem[2].sizek = (drb << 16) - (tolm << 6);
- }
- mem[3].basek = 0;
- mem[3].sizek = 0;
-
- return mem;
-}
-#endif
-#define BRIDGE_IO_MASK (IORESOURCE_IO | IORESOURCE_MEM | IORESOURCE_PREFETCH)
+#define BRIDGE_IO_MASK (IORESOURCE_IO | IORESOURCE_MEM)
static void pci_domain_read_resources(device_t dev)
{
@@ -130,21 +25,12 @@ static void pci_domain_read_resources(device_t dev)
compute_allocate_resource(&dev->link[0], resource,
IORESOURCE_IO, IORESOURCE_IO);
- /* Initialize the system wide prefetchable memory resources constraints */
- resource = new_resource(dev, 1);
- resource->limit = 0xfcffffffffULL;
- resource->flags = IORESOURCE_MEM | IORESOURCE_PREFETCH;
- compute_allocate_resource(&dev->link[0], resource,
- IORESOURCE_MEM | IORESOURCE_PREFETCH,
- IORESOURCE_MEM | IORESOURCE_PREFETCH);
-
/* Initialize the system wide memory resources constraints */
- resource = new_resource(dev, 2);
- resource->limit = 0xfcffffffffULL;
+ resource = new_resource(dev, 1);
+ resource->limit = 0xffffffffULL;
resource->flags = IORESOURCE_MEM;
compute_allocate_resource(&dev->link[0], resource,
- IORESOURCE_MEM | IORESOURCE_PREFETCH,
- IORESOURCE_MEM);
+ IORESOURCE_MEM, IORESOURCE_MEM);
}
static void ram_resource(device_t dev, unsigned long index,
@@ -164,72 +50,14 @@ static void ram_resource(device_t dev, unsigned long index,
static void pci_domain_set_resources(device_t dev)
{
- struct resource *io, *mem1, *mem2;
struct resource *resource, *last;
- unsigned long mmio_basek;
+ device_t mc_dev;
uint32_t pci_tolm;
- int idx;
- uint8_t drb;
- unsigned basek, sizek;
- device_t dev_memctrl;
-
-#if 0
- /* Place the IO devices somewhere safe */
- io = find_resource(dev, 0);
- io->base = DEVICE_IO_START;
-#endif
-#if 1
- /* Now reallocate the pci resources memory with the
- * highest addresses I can manage.
- */
- mem1 = find_resource(dev, 1);
- mem2 = find_resource(dev, 2);
-#if 1
- printk_debug("base1: 0x%08Lx limit1: 0x%08Lx size: 0x%08Lx align: %d\n",
- mem1->base, mem1->limit, mem1->size, mem1->align);
- printk_debug("base2: 0x%08Lx limit2: 0x%08Lx size: 0x%08Lx align: %d\n",
- mem2->base, mem2->limit, mem2->size, mem2->align);
-#endif
-
- /* See if both resources have roughly the same limits */
- if (((mem1->limit <= 0xffffffff) && (mem2->limit <= 0xffffffff)) ||
- ((mem1->limit > 0xffffffff) && (mem2->limit > 0xffffffff)))
- {
- /* If so place the one with the most stringent alignment first
- */
- if (mem2->align > mem1->align) {
- struct resource *tmp;
- tmp = mem1;
- mem1 = mem2;
- mem2 = tmp;
- }
- /* Now place the memory as high up as it will go */
- mem2->base = resource_max(mem2);
- mem1->limit = mem2->base - 1;
- mem1->base = resource_max(mem1);
- }
- else {
- /* Place the resources as high up as they will go */
- mem2->base = resource_max(mem2);
- mem1->base = resource_max(mem1);
- }
-
-#if 1
- printk_debug("base1: 0x%08Lx limit1: 0x%08Lx size: 0x%08Lx align: %d\n",
- mem1->base, mem1->limit, mem1->size, mem1->align);
- printk_debug("base2: 0x%08Lx limit2: 0x%08Lx size: 0x%08Lx align: %d\n",
- mem2->base, mem2->limit, mem2->size, mem2->align);
-#endif
-#endif
pci_tolm = 0xffffffffUL;
last = &dev->resource[dev->resources];
for(resource = &dev->resource[0]; resource < last; resource++)
{
-#if 1
- resource->flags |= IORESOURCE_ASSIGNED;
- resource->flags &= ~IORESOURCE_STORED;
-#endif
compute_allocate_resource(&dev->link[0], resource,
BRIDGE_IO_MASK, resource->flags & BRIDGE_IO_MASK);
@@ -243,43 +71,77 @@ static void pci_domain_set_resources(device_t dev)
}
}
-#warning "FIXME handle interleaved nodes"
- mmio_basek = pci_tolm >> 10;
- /* Round mmio_basek to something the processor can support */
- mmio_basek &= ~((1 << 6) -1);
-
-#if 1
-#warning "FIXME improve mtrr.c so we don't use up all of the mtrrs with a 64M MMIO hole"
- /* Round the mmio hold to 64M */
- mmio_basek &= ~((64*1024) - 1);
-#endif
-
- dev_memctrl = dev_find_slot(0, 0); // d0f0
- drb = pci_read_config8(dev_memctrl, 0x67);
-
- idx = 10;
-
- basek = 0;
- sizek = 640;
- ram_resource(dev, idx++, basek, sizek);
-
- basek = 768;
- sizek = mmio_basek - basek;
- ram_resource(dev, idx++, basek, sizek);
-
- if ((drb << 16) > mmio_basek) {
- /* We don't need to consider the remap window
- * here because we put it immediately after the
- * rest of ram.
- * All we must do is calculate the amount
- * of unused memory and report it at 4GB.
- */
- basek = 4096*1024;
- sizek = (drb << 16) - mmio_basek;
- ram_resource(dev, idx++, basek, sizek);
+ mc_dev = dev->link[0].children;
+ if (mc_dev) {
+ /* Figure out which areas are/should be occupied by RAM.
+ * This is all computed in kilobytes and converted to/from
+ * the memory controller right at the edges.
+ * Having different variables in different units is
+ * too confusing to get right. Kilobytes are good up to
+ * 4 Terabytes of RAM...
+ */
+ uint16_t tolm_r, remapbase_r, remaplimit_r;
+ unsigned long tomk, tolmk;
+ unsigned long remapbasek, remaplimitk;
+ int idx;
+
+ /* Get the value of the highest DRB. This tells the end of
+ * the physical memory. The units are ticks of 64MB
+ * i.e. 1 means 64MB.
+ */
+ tomk = ((unsigned long)pci_read_config8(mc_dev, 0x67)) << 16;
+ /* Compute the top of Low memory */
+ tolmk = pci_tolm >> 10;
+ if (tolmk >= tomk) {
+ /* The PCI hole does not overlap memory
+ * we won't use the remap window.
+ */
+ tolmk = tomk;
+ remapbasek = 0x3ff << 16;
+ remaplimitk = 0 << 16;
+ }
+ else {
+ /* The PCI memory hole overlaps memory
+ * setup the remap window.
+ */
+ /* Find the bottom of the remap window
+ * is it above 4G?
+ */
+ remapbasek = 4*1024*1024;
+ if (tomk > remapbasek) {
+ remapbasek = tomk;
+ }
+ /* Find the limit of the remap window */
+ remaplimitk = (remapbasek + (4*1024*1024 - tolmk) - (1 << 16));
+ }
+ /* Write the ram configuration registers,
+ * preserving the reserved bits.
+ */
+ tolm_r = pci_read_config16(mc_dev, 0xc4);
+ tolm_r = ((tolmk >> 17) << 11) | (tolm_r & 0x7ff);
+ pci_write_config16(mc_dev, 0xc4, tolm_r);
+
+ remapbase_r = pci_read_config16(mc_dev, 0xc6);
+ remapbase_r = (remapbasek >> 16) | (remapbase_r & 0xfc00);
+ pci_write_config16(mc_dev, 0xc6, remapbase_r);
+
+ remaplimit_r = pci_read_config16(mc_dev, 0xc8);
+ remaplimit_r = (remaplimitk >> 16) | (remaplimit_r & 0xfc00);
+ pci_write_config16(mc_dev, 0xc8, rempaplimit_r);
+
+ /* Report the memory regions */
+ idx = 10;
+ ram_resource(dev, idx++, 0, 640);
+ ram_resource(dev, idx++, 768, tolmk - 768);
+ if (tomk > 4*1024*1024) {
+ ram_resource(dev, idx++, 4096*1024, tomk - 4*1024*1024);
+ }
+ if (remaplimitk >= remapbasek) {
+ ram_resource(dev, idx++, ramapbasek,
+ (reamplimitk + 64*1024) = remapbasek);
+ }
}
-
- assign_resources(&dev->link[0]);
+ assign_resources(&dev->link[0]);
}
static unsigned int pci_domain_scan_bus(device_t dev, unsigned int max)
@@ -296,56 +158,6 @@ static struct device_operations pci_domain_ops = {
.scan_bus = pci_domain_scan_bus,
};
-static unsigned int cpu_bus_scan(device_t dev, unsigned int max)
-{
- struct bus *cpu_bus;
- unsigned reg;
- int i;
-
- /* Find which cpus are present */
- cpu_bus = &dev->link[0];
- for(i = 0; i < 7; i+=6) {
- device_t dev, cpu;
- struct device_path cpu_path;
-#if 0
-//How to identify Intel CPU
- /* Find the cpu's memory controller */
- dev = dev_find_slot(0, PCI_DEVFN(0x18 + i, 0));
-#endif
-
- /* Build the cpu device path */
- cpu_path.type = DEVICE_PATH_APIC;
- cpu_path.u.apic.apic_id = i;
-
- /* See if I can find the cpu */
- cpu = find_dev_path(cpu_bus, &cpu_path);
-#if 0
- /* Enable the cpu if I have the processor */
- if (dev && dev->enabled) {
- if (!cpu) {
- cpu = alloc_dev(cpu_bus, &cpu_path);
- }
- if (cpu) {
- cpu->enabled = 1;
- }
- }
-
- /* Disable the cpu if I don't have the processor */
- if (cpu && (!dev || !dev->enabled)) {
- cpu->enabled = 0;
- }
-#else
- cpu->enabled = 1;
-#endif
- /* Report what I have done */
- if (cpu) {
- printk_debug("CPU: %s %s\n",
- dev_path(cpu), cpu->enabled?"enabled":"disabled");
- }
- }
- return max;
-}
-
static void cpu_bus_init(device_t dev)
{
initialize_cpus(&dev->link[0]);
@@ -360,7 +172,7 @@ static struct device_operations cpu_bus_ops = {
.set_resources = cpu_bus_noop,
.enable_resources = cpu_bus_noop,
.init = cpu_bus_init,
- .scan_bus = cpu_bus_scan,
+ .scan_bus = cpu_bus_noop,
};
static void enable_dev(struct device *dev)
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-25 04:50:02 +0000