diff options
Diffstat (limited to 'src/northbridge/intel/sandybridge')
| -rw-r--r-- | src/northbridge/intel/sandybridge/Kconfig | 12 | ||||
| -rw-r--r-- | src/northbridge/intel/sandybridge/raminit_common.c | 3 |
2 files changed, 15 insertions, 0 deletions
diff --git a/src/northbridge/intel/sandybridge/Kconfig b/src/northbridge/intel/sandybridge/Kconfig index 2d13f286e9..7c954fbbcb 100644 --- a/src/northbridge/intel/sandybridge/Kconfig +++ b/src/northbridge/intel/sandybridge/Kconfig @@ -44,6 +44,18 @@ config USE_NATIVE_RAMINIT Select if you want to use coreboot implementation of raminit rather than System Agent/MRC.bin. You should answer Y. +config NATIVE_RAMINIT_IGNORE_MAX_MEM_FUSES + bool "Ignore vendor programmed fuses that limit max. DRAM frequency" + default n + depends on USE_NATIVE_RAMINIT + help + Ignore the mainboard's vendor programmed fuses that might limit the + maximum DRAM frequency. By selecting this option the fuses will be + ignored and the only limits on DRAM frequency are set by RAM's SPD and + hard fuses in southbridge's clockgen. + Disabled by default as it might causes system instability. + Handle with care! + config CBFS_SIZE hex default 0x100000 diff --git a/src/northbridge/intel/sandybridge/raminit_common.c b/src/northbridge/intel/sandybridge/raminit_common.c index c6ff551fbf..3e69f4da72 100644 --- a/src/northbridge/intel/sandybridge/raminit_common.c +++ b/src/northbridge/intel/sandybridge/raminit_common.c @@ -402,6 +402,9 @@ unsigned int get_mem_min_tck(void) /* If this is zero, it just means devicetree.cb didn't set it */ if (!cfg || cfg->max_mem_clock_mhz == 0) { + if (IS_ENABLED(CONFIG_NATIVE_RAMINIT_IGNORE_MAX_MEM_FUSES)) + return TCK_1333MHZ; + rev = pci_read_config8(PCI_DEV(0, 0, 0), PCI_DEVICE_ID); if ((rev & BASE_REV_MASK) == BASE_REV_SNB) { |