diff options
Diffstat (limited to 'src/northbridge/intel/sandybridge/chip.h')
-rw-r--r-- | src/northbridge/intel/sandybridge/chip.h | 66 |
1 files changed, 66 insertions, 0 deletions
diff --git a/src/northbridge/intel/sandybridge/chip.h b/src/northbridge/intel/sandybridge/chip.h index d002824287..7dddb8abd0 100644 --- a/src/northbridge/intel/sandybridge/chip.h +++ b/src/northbridge/intel/sandybridge/chip.h @@ -52,6 +52,72 @@ struct northbridge_intel_sandybridge_config { * Maximum PCI mmio size in MiB. */ u16 pci_mmio_size; + + /* Data for RAM init */ + + /* DIMM SPD address. Use 8bit notation where BIT0 is always zero. */ + u8 spd_addresses[4]; + + /* PEI data for RAM init and early silicon init */ + u8 ts_addresses[4]; + + bool ec_present; + bool ddr3lv_support; + + /* N mode functionality. Leave this setting at 0. + * 0 Auto + * 1 1N + * 2 2N + */ + enum { + DDR_NMODE_AUTO = 0, + DDR_NMODE_1N, + DDR_NMODE_2N, + } nmode; + + /* DDR refresh rate config. JEDEC Standard No.21-C Annex K allows + * for DIMM SPD data to specify whether double-rate is required for + * extended operating temperature range. + * 0 Enable double rate based upon temperature thresholds + * 1 Normal rate + * 2 Always enable double rate + */ + enum { + DDR_REFRESH_RATE_TEMP_THRES = 0, + DDR_REFRESH_REATE_NORMAL, + DDR_REFRESH_RATE_DOUBLE, + } ddr_refresh_rate_config; + + /* + * USB Port Configuration: + * [0] = enable + * [1] = overcurrent pin + * [2] = length + * + * Ports 0-7 can be mapped to OC0-OC3 + * Ports 8-13 can be mapped to OC4-OC7 + * + * Port Length + * MOBILE: + * < 0x050 = Setting 1 (back panel, 1-5in, lowest tx amplitude) + * < 0x140 = Setting 2 (back panel, 5-14in, highest tx amplitude) + * DESKTOP: + * < 0x080 = Setting 1 (front/back panel, <8in, lowest tx amplitude) + * < 0x130 = Setting 2 (back panel, 8-13in, higher tx amplitude) + * < 0x150 = Setting 3 (back panel, 13-15in, highest tx amplitude) + */ + u16 usb_port_config[16][3]; + + struct { + /* 0: Disable, 1: Enable, 2: Auto, 3: Smart Auto */ + u8 mode : 2; + /* 4 bit mask, 1: switchable, 0: not switchable */ + u8 hs_port_switch_mask : 4; + /* 0: No xHCI preOS driver, 1: xHCI preOS driver */ + u8 preboot_support : 1; + /* 0: Disable, 1: Enable */ + u8 xhci_streams : 1; + } usb3; }; #endif /* NORTHBRIDGE_INTEL_SANDYBRIDGE_CHIP_H */ |