diff options
Diffstat (limited to 'src/northbridge/intel/i855pm/raminit.c')
-rw-r--r-- | src/northbridge/intel/i855pm/raminit.c | 314 |
1 files changed, 108 insertions, 206 deletions
diff --git a/src/northbridge/intel/i855pm/raminit.c b/src/northbridge/intel/i855pm/raminit.c index 5bb3b7f653..8d029920cf 100644 --- a/src/northbridge/intel/i855pm/raminit.c +++ b/src/northbridge/intel/i855pm/raminit.c @@ -145,109 +145,25 @@ static void ENABLE_REFRESH(const struct mem_controller *ctrl) * Table: constant_register_values */ static const long register_values[] = { - /* SVID - Subsystem Vendor Identification Register - * 0x2c - 0x2d - * [15:00] Subsytem Vendor ID (Indicates system board vendor) - */ - /* SID - Subsystem Identification Register - * 0x2e - 0x2f - * [15:00] Subsystem ID - */ - 0x2c, 0, (0x15d9 << 0) | (0x3580 << 16), - - /* Undocumented - * 0x80 - 0x80 - * This register has something to do with CAS latencies, - * possibily this is the real chipset control. - * At 0x00 CAS latency 1.5 works. - * At 0x06 CAS latency 2.5 works. - * At 0x01 CAS latency 2.0 works. - */ - /* This is still undocumented in e7501, but with different values - * CAS 2.0 values taken from Intel BIOS settings, others are a guess - * and may be terribly wrong. Old values preserved as comments until I - * figure this out for sure. - * e7501 docs claim that CAS1.5 is unsupported, so it may or may not - * work at all. - * Steven James 02/06/2003 - */ -#if CAS_LATENCY == CAS_2_5 -// 0x80, 0xfffffe00, 0x06 /* Intel E7500 recommended */ - 0x80, 0xfffff000, 0x0662, /* from Factory Bios */ -#elif CAS_LATENCY == CAS_2_0 -// 0x80, 0xfffffe00, 0x0d /* values for register 0x80 */ - 0x80, 0xfffff000, 0x0bb1, /* values for register 0x80 */ -#endif - - /* Enable periodic memory recalibration */ - 0x88, 0xffffff00, 0x80, - - /* FDHC - Fixed DRAM Hole Control - * 0x58 - * [7:7] Hole_Enable - * 0 == No memory Hole - * 1 == Memory Hole from 15MB to 16MB - * [6:0] Reserved - * - * PAM - Programmable Attribute Map - * 0x59 [1:0] Reserved - * 0x59 [5:4] 0xF0000 - 0xFFFFF - * 0x5A [1:0] 0xC0000 - 0xC3FFF - * 0x5A [5:4] 0xC4000 - 0xC7FFF - * 0x5B [1:0] 0xC8000 - 0xCBFFF - * 0x5B [5:4] 0xCC000 - 0xCFFFF - * 0x5C [1:0] 0xD0000 - 0xD3FFF - * 0x5C [5:4] 0xD4000 - 0xD7FFF - * 0x5D [1:0] 0xD8000 - 0xDBFFF - * 0x5D [5:4] 0xDC000 - 0xDFFFF - * 0x5E [1:0] 0xE0000 - 0xE3FFF - * 0x5E [5:4] 0xE4000 - 0xE7FFF - * 0x5F [1:0] 0xE8000 - 0xEBFFF - * 0x5F [5:4] 0xEC000 - 0xEFFFF - * 00 == DRAM Disabled (All Access go to memory mapped I/O space) - * 01 == Read Only (Reads to DRAM, Writes to memory mapped I/O space) - * 10 == Write Only (Writes to DRAM, Reads to memory mapped I/O space) - * 11 == Normal (All Access go to DRAM) - */ - 0x58, 0xcccccf7f, (0x00 << 0) | (0x30 << 8) | (0x33 << 16) | (0x33 << 24), - 0x5C, 0xcccccccc, (0x33 << 0) | (0x33 << 8) | (0x33 << 16) | (0x33 << 24), - /* DRB - DRAM Row Boundary Registers - * 0x60 - 0x6F + * 0x60 - 0x63 * An array of 8 byte registers, which hold the ending - * memory address assigned to each pair of DIMMS, in 64MB + * memory address assigned to each pair of DIMMS, in 32MB * granularity. */ - /* Conservatively say each row has 64MB of ram, we will fix this up later */ + /* Conservatively say each row has 32MB of ram, we will fix this up later */ 0x60, 0x00000000, (0x01 << 0) | (0x02 << 8) | (0x03 << 16) | (0x04 << 24), - 0x64, 0x00000000, (0x05 << 0) | (0x06 << 8) | (0x07 << 16) | (0x08 << 24), - 0x68, 0xffffffff, 0, - 0x6C, 0xffffffff, 0, - /* DRA - DRAM Row Attribute Register * 0x70 Row 0,1 * 0x71 Row 2,3 - * 0x72 Row 4,5 - * 0x73 Row 6,7 - * [7:7] Device width for Odd numbered rows - * 0 == 8 bits wide x8 - * 1 == 4 bits wide x4 - * [6:4] Row Attributes for Odd numbered rows - * 010 == 8KB - * 011 == 16KB - * 100 == 32KB - * 101 == 64KB - * Others == Reserved - * [3:3] Device width for Even numbered rows - * 0 == 8 bits wide x8 - * 1 == 4 bits wide x4 - * [2:0] Row Attributes for Even numbered rows - * 010 == 8KB - * 011 == 16KB - * 100 == 32KB - * 101 == 64KB (This page size appears broken) + * [2:0] Row Attributes for both rows + * 001 == 2KB + * 010 == 4KB + * 011 == 8KB + * 100 == 16KB * Others == Reserved */ + /* leave it alone for now -- seems bad to set it at all 0x70, 0x00000000, (((0<<3)|(0<<0))<< 0) | (((0<<3)|(0<<0))<< 4) | @@ -257,31 +173,45 @@ static const long register_values[] = { (((0<<3)|(0<<0))<<20) | (((0<<3)|(0<<0))<<24) | (((0<<3)|(0<<0))<<28), - 0x74, 0xffffffff, 0, - + */ /* DRT - DRAM Time Register * 0x78 - * [31:30] Reserved + * [31:31] Additional CKE to CS Clock for Read/Write + * [30:30] Additional CKE to CS clock for Precharge/Activate * [29:29] Back to Back Write-Read Turn Around - * 0 == 3 clocks between WR-RD commands - * 1 == 2 clocks between WR-RD commands + * Intel recommends set to 1 + * * [28:28] Back to Back Read-Write Turn Around - * 0 == 5 clocks between RD-WR commands - * 1 == 4 clocks between RD-WR commands + * Intel recommends 0 for CL 2.5 and 1 for CL 2 + * * [27:27] Back to Back Read Turn Around - * 0 == 4 clocks between RD commands - * 1 == 3 clocks between RD commands + * Intel recommends 1 for all configs + * * [26:24] Read Delay (tRD) - * 000 == 7 clocks - * 001 == 6 clocks - * 010 == 5 clocks + * 000 == 9 clocks + * 001 == 8 clocks + * 010 == 7 clocks + * 011 == 6 clocks + * 100 == 5 clocks + * 101 == 4 clocks + * 110 == 3 clocks * Others == Reserved - * [23:19] Reserved - * [18:16] DRAM idle timer + * [23:20] Reserved + * [19:19] No Wake for DDR page closes + * 0 is default + * [18:16] Page Close Counter * 000 == infinite - * 011 == 16 dram clocks - * 001 == Datasheet says reserved, but Intel BIOS sets it - * [15:11] Reserved + * 010 == 8-15 clocks + * 011 == 16-31 clocks + * 100 == 64-127 clocks + * 101 == 128-255 clocks + * 110 == 192-383 clocks + * 111 == 255-510 clocks + * + * [15:12] Reserved + * [11:11] DQS Slave DLL Dynamic Management + * power saving, when set to 1, slave DLLS disabled + * we'll leave it at 0 for now * [10:09] Active to Precharge (tRAS) * 00 == 7 clocks * 01 == 6 clocks @@ -290,21 +220,19 @@ static const long register_values[] = { * [08:06] Reserved * [05:04] Cas Latency (tCL) * 00 == 2.5 Clocks - * 01 == 2.0 Clocks + * 01 == 2.0 Clocks (default) * 10 == 1.5 Clocks * 11 == Reserved - * [03:03] Write Ras# to Cas# Delay (tRCD) + * [03:03] Reserved + * [02:02] Ras# to Cas# Delay (tRCD) * 0 == 3 DRAM Clocks * 1 == 2 DRAM Clocks - * [02:01] Read RAS# to CAS# Delay (tRCD) - * 00 == reserved - * 01 == reserved - * 10 == 3 DRAM Clocks - * 11 == 2 DRAM Clocks + * [01:01] Reserved * [00:00] DRAM RAS# to Precharge (tRP) * 0 == 3 DRAM Clocks * 1 == 2 DRAM Clocks */ + #define DRT_CAS_2_5 (0<<4) #define DRT_CAS_2_0 (1<<4) #define DRT_CAS_1_5 (2<<4) @@ -318,42 +246,79 @@ static const long register_values[] = { #define DRT_CL DRT_CAS_1_5 #endif - /* Most aggressive settings possible */ + /* Most unaggressive settings possible */ + /* clear bits 26:24,18:16,11,10:9,5:4,2:2,0 */ + /* ~ (7<<26)|(7<<18)|(1<<11)|(3<<10)|(3<<5)|(1<<2)|1 */ // 0x78, 0xc0fff8c4, (1<<29)|(1<<28)|(1<<27)|(2<<24)|(2<<9)|DRT_CL|(1<<3)|(1<<1)|(1<<0), // 0x78, 0xc0f8f8c0, (1<<29)|(1<<28)|(1<<27)|(1<<24)|(1<<16)|(2<<9)|DRT_CL|(1<<3)|(3<<1)|(1<<0), - 0x78, 0xc0f8f9c0, (1<<29)|(1<<28)|(1<<27)|(1<<24)|(1<<16)|(2<<9)|DRT_CL|(1<<3)|(3<<1)|(1<<0), +// 0x78, 0xc0f8f9c0, (1<<29)|(1<<28)|(1<<27)|(1<<24)|(1<<16)|(2<<9)|DRT_CL|(1<<3)|(3<<1)|(1<<0), + 0x78, ~((7<<26)|(7<<18)|(1<<11)|(3<<10)|(3<<5)|(1<<2)|1), + (1<<29)|(1<<28)|(9<<26)|(0<<18)|(0<<11)|(0<<10)|(0<<5)|(0<<2)|(0<<0), + + /* FDHC - Fixed DRAM Hole Control + * 0x97 + * [7:7] Hole_Enable + * 0 == No memory Hole + * 1 == Memory Hole from 15MB to 16MB + * [6:0] Reserved + * + * PAM - Programmable Attribute Map + * 0x90 [3:0] Reserved + * 0x90 [5:4] 0xF0000 - 0xFFFFF + * 0x91 [1:0] 0xC0000 - 0xC3FFF + * 0x91 [5:4] 0xC4000 - 0xC7FFF + * 0x92 [1:0] 0xC8000 - 0xCBFFF + * 0x92 [5:4] 0xCC000 - 0xCFFFF + * 0x93 [1:0] 0xD0000 - 0xD3FFF + * 0x93 [5:4] 0xD4000 - 0xD7FFF + * 0x94 [1:0] 0xD8000 - 0xDBFFF + * 0x94 [5:4] 0xDC000 - 0xDFFFF + * 0x95 [1:0] 0xE0000 - 0xE3FFF + * 0x95 [5:4] 0xE4000 - 0xE7FFF + * 0x96 [1:0] 0xE8000 - 0xEBFFF + * 0x96 [5:4] 0xEC000 - 0xEFFFF + * 00 == DRAM Disabled (All Access go to memory mapped I/O space) + * 01 == Read Only (Reads to DRAM, Writes to memory mapped I/O space) + * 10 == Write Only (Writes to DRAM, Reads to memory mapped I/O space) + * 11 == Normal (All Access go to DRAM) + */ + 0x90, 0xcccccf7f, (0x00 << 0) | (0x30 << 8) | (0x33 << 16) | (0x33 << 24), + 0x94, 0xcccccccc, (0x33 << 0) | (0x33 << 8) | (0x33 << 16) | (0x33 << 24), + /* FIXME why was I attempting to set a reserved bit? */ /* 0x0100040f */ /* DRC - DRAM Contoller Mode Register * 0x7c - * [31:30] Reserved + * [31:30] Rev # * [29:29] Initialization Complete * 0 == Not Complete * 1 == Complete - * [28:23] Reserved - * [22:22] Channels - * 0 == Single channel - * 1 == Dual Channel - * [21:20] DRAM Data Integrity Mode - * 00 == Disabled, no ECC - * 01 == Reserved - * 10 == Error checking, using chip-kill, with correction - * 11 == Reserved + * [28:27] Dynamic Power Down Enable (leave at 0 for now) + * [27:24] Reserved + * [23:23] Reduced Comamnd Drive Delay (leave at 0 for now) + * [22:22] Reduced Command Drive Enable (leave at 0 for now) + * [21:21] DRAM Data Integrity Mode + * 0 == Disabled, no ECC + * 1 == Error checking, with correction + * [20:20] Reserved * [19:18] Reserved - * Must equal 01 - * [17:17] (Intel Undocumented) should always be set to 1 - * [16:16] Command Per Clock - Address/Control Assertion Rule (CPC) + * Must equal 00 + * [17:17] (Intel Undocumented) should always be set to + * [16:16] Disable SCK Tri-state in C3/S1-m * 0 == 2n Rule * 1 == 1n rule - * [15:11] Reserved + * [15:14] Reserved + * [13:13] Dynamic CS Disable + * [12:12] SM Interface Tristate enable + * [11:11] Reserved * [10:08] Refresh mode select * 000 == Refresh disabled * 001 == Refresh interval 15.6 usec * 010 == Refresh interval 7.8 usec * 011 == Refresh interval 64 usec - * 111 == Refresh every 64 clocks (fast refresh) + * 111 == Reserved * [07:07] Reserved * [06:04] Mode Select (SMS) * 000 == Self Refresh Mode @@ -364,78 +329,15 @@ static const long register_values[] = { * 101 == Reserved * 110 == CBR Refresh * 111 == Normal Operation - * [03:00] Reserved + * [03:01] Reserved + * [00:00] DRAM type --hardwired to 1 to indicate DDR */ // .long 0x7c, 0xffcefcff, (1<<22)|(2 << 20)|(1 << 16)| (0 << 8), // .long 0x7c, 0xff8cfcff, (1<<22)|(2 << 20)|(1 << 17)|(1 << 16)| (0 << 8), // .long 0x7c, 0xff80fcff, (1<<22)|(2 << 20)|(1 << 18)|(1 << 17)|(1 << 16)| (0 << 8), - 0x7c, 0xff82fcff, (1<<22)|(2 << 20)|(1 << 18)|(1 << 16)| (0 << 8), - - - /* Another Intel undocumented register */ - 0x88, 0x080007ff, (1<<31)|(1 << 30)|(1<<28)|(0 << 26)|(0x10 << 21)|(10 << 16)|(0x13 << 11), - - /* CLOCK_DIS - CK/CK# Disable Register - * 0x8C - * [7:4] Reserved - * [3:3] CK3 - * 0 == Enable - * 1 == Disable - * [2:2] CK2 - * 0 == Enable - * 1 == Disable - * [1:1] CK1 - * 0 == Enable - * 1 == Disable - * [0:0] CK0 - * 0 == Enable - * 1 == Disable - */ - 0x8C, 0xfffffff0, 0xf, - - /* TOLM - Top of Low Memory Register - * 0xC4 - 0xC5 - * [15:11] Top of low memory (TOLM) - * The address below 4GB that should be treated as RAM, - * on a 128MB granularity. - * [10:00] Reserved - */ - /* REMAPBASE - Remap Base Address Regsiter - * 0xC6 - 0xC7 - * [15:10] Reserved - * [09:00] Remap Base Address [35:26] 64M aligned - * Bits [25:0] are assumed to be 0. - */ - 0xc4, 0xfc0007ff, (0x2000 << 0) | (0x3ff << 16), - /* REMAPLIMIT - Remap Limit Address Register - * 0xC8 - 0xC9 - * [15:10] Reserved - * [09:00] Remap Limit Address [35:26] 64M aligned - * When remaplimit < remapbase this register is disabled. - */ - 0xc8, 0xfffffc00, 0, - - /* DVNP - Device Not Present Register - * 0xE0 - 0xE1 - * [15:05] Reserved - * [04:04] Device 4 Function 1 Present - * 0 == Present - * 1 == Absent - * [03:03] Device 3 Function 1 Present - * 0 == Present - * 1 == Absent - * [02:02] Device 2 Function 1 Present - * 0 == Present - * 1 == Absent - * [01:01] Reserved - * [00:00] Device 0 Function 1 Present - * 0 == Present - * 1 == Absent - */ - 0xe0, 0xffffffe2, (1<<4)|(1<<3)|(1<<2)|(0<<0), - 0xd8, 0xffff9fff, 0x00000000, - 0xf4, 0x3f8ffffd, 0x40300002, - 0x1050, 0xffffffcf, 0x00000030, +// 0x7c, 0xff82fcff, (1<<22)|(2 << 20)|(1 << 18)|(1 << 16)| (0 << 8), + 0x7c, 0xff82f8ff, (1<<22)|(2 << 20)|(1 << 18)|(1 << 16)| (0 << 8), + }; @@ -494,9 +396,9 @@ static void ram_set_rcomp_regs(const struct mem_controller *ctrl) { #endif /*enable access to the rcomp bar */ + /* for e7501 they also set bit 31 ... */ dword = pci_read_config32(ctrl->d0, 0x0f4); - dword &= ~(1<<31); - dword |=((1<<30)|1<<22); + dword |= 1<<22; pci_write_config32(ctrl->d0, 0x0f4, dword); @@ -507,7 +409,7 @@ static void ram_set_rcomp_regs(const struct mem_controller *ctrl) { dword |= (1<<9); write32(RCOMP_MMIO + 0x20, dword); - +#ifdef NOTNOW /* Begin to write the RCOMP registers */ write8(RCOMP_MMIO + 0x2c, 0xff); @@ -564,7 +466,7 @@ static void ram_set_rcomp_regs(const struct mem_controller *ctrl) { /* Wait 40 usec */ SLOW_DOWN_IO; - +#endif /*disable access to the rcomp bar */ dword = pci_read_config32(ctrl->d0, 0x0f4); dword &= ~(1<<22); |