diff options
Diffstat (limited to 'src/northbridge/intel/i855')
| -rw-r--r-- | src/northbridge/intel/i855/Kconfig | 35 | ||||
| -rw-r--r-- | src/northbridge/intel/i855/Makefile.inc | 5 | ||||
| -rw-r--r-- | src/northbridge/intel/i855/debug.c | 129 | ||||
| -rw-r--r-- | src/northbridge/intel/i855/i855.h | 77 | ||||
| -rw-r--r-- | src/northbridge/intel/i855/northbridge.c | 145 | ||||
| -rw-r--r-- | src/northbridge/intel/i855/raminit.c | 980 | ||||
| -rw-r--r-- | src/northbridge/intel/i855/raminit.h | 29 | ||||
| -rw-r--r-- | src/northbridge/intel/i855/reset_test.c | 35 |
8 files changed, 0 insertions, 1435 deletions
diff --git a/src/northbridge/intel/i855/Kconfig b/src/northbridge/intel/i855/Kconfig deleted file mode 100644 index a9439dcd40..0000000000 --- a/src/northbridge/intel/i855/Kconfig +++ /dev/null @@ -1,35 +0,0 @@ -config NORTHBRIDGE_INTEL_I855 - bool - select NO_MMCONF_SUPPORT - select HAVE_DEBUG_RAM_SETUP - select LATE_CBMEM_INIT - -choice - prompt "Onboard graphics" - default I855_VIDEO_MB_8MB - depends on NORTHBRIDGE_INTEL_I855 - -config I855_VIDEO_MB_OFF - bool "Disabled, 0KB" -config I855_VIDEO_MB_1MB - bool "Enabled, 1MB" -config I855_VIDEO_MB_4MB - bool "Enabled, 4MB" -config I855_VIDEO_MB_8MB - bool "Enabled, 8MB" -config I855_VIDEO_MB_16MB - bool "Enabled, 16MB" -config I855_VIDEO_MB_32MB - bool "Enabled, 32MB" - -endchoice - -config VIDEO_MB - int - default 0 if I855_VIDEO_MB_OFF - default 1 if I855_VIDEO_MB_1MB - default 4 if I855_VIDEO_MB_4MB - default 8 if I855_VIDEO_MB_8MB - default 16 if I855_VIDEO_MB_16MB - default 32 if I855_VIDEO_MB_32MB - depends on NORTHBRIDGE_INTEL_I855 diff --git a/src/northbridge/intel/i855/Makefile.inc b/src/northbridge/intel/i855/Makefile.inc deleted file mode 100644 index 4dfc358fa0..0000000000 --- a/src/northbridge/intel/i855/Makefile.inc +++ /dev/null @@ -1,5 +0,0 @@ -ifeq ($(CONFIG_NORTHBRIDGE_INTEL_I855),y) - -ramstage-y += northbridge.c - -endif diff --git a/src/northbridge/intel/i855/debug.c b/src/northbridge/intel/i855/debug.c deleted file mode 100644 index bdf25235e2..0000000000 --- a/src/northbridge/intel/i855/debug.c +++ /dev/null @@ -1,129 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2003 Ronald G. Minnich - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <spd.h> - -static void print_debug_pci_dev(unsigned dev) -{ - printk(BIOS_DEBUG, "PCI: %02x:%02x.%x", - (dev >> 20) & 0xff, (dev >> 15) & 0x1f, (dev >> 12) & 0x07); -} - -static inline void print_pci_devices(void) -{ - pci_devfn_t dev; - for (dev = PCI_DEV(0, 0, 0); - dev <= PCI_DEV(0, 0x1f, 0x7); - dev += PCI_DEV(0,0,1)) { - uint32_t id; - id = pci_read_config32(dev, PCI_VENDOR_ID); - if (((id & 0xffff) == 0x0000) || ((id & 0xffff) == 0xffff) || - (((id >> 16) & 0xffff) == 0xffff) || - (((id >> 16) & 0xffff) == 0x0000)) { - continue; - } - print_debug_pci_dev(dev); - printk(BIOS_DEBUG, "\n"); - } -} - -static void dump_pci_device(unsigned dev) -{ - int i; - print_debug_pci_dev(dev); - printk(BIOS_DEBUG, "\n"); - - for (i = 0; i <= 255; i++) { - unsigned char val; - if ((i & 0x0f) == 0) - printk(BIOS_DEBUG, "%02x:", i); - val = pci_read_config8(dev, i); - printk(BIOS_DEBUG, " %02x", val); - if ((i & 0x0f) == 0x0f) - printk(BIOS_DEBUG, "\n"); - } -} - -static inline void dump_pci_devices(void) -{ - pci_devfn_t dev; - for (dev = PCI_DEV(0, 0, 0); - dev <= PCI_DEV(0, 0x1f, 0x7); - dev += PCI_DEV(0,0,1)) { - uint32_t id; - id = pci_read_config32(dev, PCI_VENDOR_ID); - if (((id & 0xffff) == 0x0000) || ((id & 0xffff) == 0xffff) || - (((id >> 16) & 0xffff) == 0xffff) || - (((id >> 16) & 0xffff) == 0x0000)) { - continue; - } - dump_pci_device(dev); - } -} - -static inline void dump_spd_registers(void) -{ - int i; - printk(BIOS_DEBUG, "\n"); - for (i = 0; i < 2; i++) { - unsigned device; - device = DIMM0 + i; - if (device) { - int j; - printk(BIOS_DEBUG, "dimm: %02x.0: %02x", i, device); - for (j = 0; j < 256; j++) { - int status; - unsigned char byte; - if ((j & 0xf) == 0) - printk(BIOS_DEBUG, "\n%02x: ", j); - status = smbus_read_byte(device, j); - if (status < 0) { - printk(BIOS_DEBUG, "bad device\n"); - break; - } - byte = status & 0xff; - printk(BIOS_DEBUG, "%02x ", byte); - } - printk(BIOS_DEBUG, "\n"); - } - } -} - -static inline void dump_smbus_registers(void) -{ - int i; - printk(BIOS_DEBUG, "\n"); - for (i = 1; i < 0x80; i++) { - unsigned device; - device = i; - int j; - printk(BIOS_DEBUG, "smbus: %02x", device); - for (j = 0; j < 256; j++) { - int status; - unsigned char byte; - if ((j & 0xf) == 0) - printk(BIOS_DEBUG, "\n%02x: ", j); - status = smbus_read_byte(device, j); - if (status < 0) { - printk(BIOS_DEBUG, "bad device\n"); - break; - } - byte = status & 0xff; - printk(BIOS_DEBUG, "%02x ", byte); - } - printk(BIOS_DEBUG, "\n"); - } -} diff --git a/src/northbridge/intel/i855/i855.h b/src/northbridge/intel/i855/i855.h deleted file mode 100644 index 467875faf4..0000000000 --- a/src/northbridge/intel/i855/i855.h +++ /dev/null @@ -1,77 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Travelping GmbH <info@travelping.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef NORTHBRIDGE_INTEL_I855_I855_H -#define NORTHBRIDGE_INTEL_I855_I855_H - -/* Host-Hub Interface Bridge */ -#define GMC 0x50 /* GMCH Misc. Control (0x0000) */ -#define GGC 0x52 /* GMCH Graphics Control (0x0030) */ -#define DAFC 0x54 /* Device and Function Control (0x0000) */ -#define FDHC 0x58 /* Fixed Dram Hole Control */ -#define PAM0 0x59 /* Programmable Attribute Map #0 (0x00) */ -#define PAM1 0x5a /* Programmable Attribute Map #1 (0x00) */ -#define PAM2 0x5b /* Programmable Attribute Map #2 (0x00) */ -#define PAM3 0x5c /* Programmable Attribute Map #3 (0x00) */ -#define PAM4 0x5d /* Programmable Attribute Map #4 (0x00) */ -#define PAM5 0x5e /* Programmable Attribute Map #5 (0x00) */ -#define PAM6 0x5f /* Programmable Attribute Map #6 (0x00) */ -#define SMRAM 0x60 /* System Management RAM Control (0x02) */ -#define ESMRAMC 0x61 /* Extended System Management RAM Control (0x38) */ -#define ERRSTS 0x62 /* Error Status (0x0000) */ -#define ERRCMD 0x64 /* Error Command (0x0000) */ -#define SMICMD 0x66 /* SMI Command (0x00) */ -#define SCICMD 0x67 /* SCI Command (0x00) */ -#define SHIC 0x74 /* Secondary Host Interface Control Register (0x00006010) */ -#define ACAPID 0xA0 /* AGP Capability Identifier (0x00200002) */ -#define AGPSTAT 0xA4 /* AGP Status Register (0x1f000217) */ -#define AGPCMD 0xA8 /* AGP Command (0x0000) */ -#define AGPCTRL 0xB0 /* AGP Control (0x0000) */ -#define AFT 0xB2 /* AGP Functional Test (0xe9f0) */ -#define ATTBASE 0xB8 /* Aperture Translation Table Base (0x00000000) */ -#define AMTT 0xBC /* AGP Interface Multi Transaction Timer (0x00) */ -#define LPTT 0xBD /* Low Priority Transaction Timer (0x00) */ -#define HEM 0xF0 /* Host Error Control/Status/Obs (0x00000000) */ - -/* Main Memory Control */ -#define DRB 0x40 /* DRAM Row 0-3 Boundary (0x00000000) */ -#define DRA 0x50 /* DRAM Row 0-3 Attribute (0x7777) */ -#define DRT 0x60 /* DRAM Timing (0x18004425) */ -#define PWRMG 0x68 /* DRAM Controller Power Management Control (0x00000000) */ -#define DRC 0x70 /* DRAM Controller Mode (0x00000081) */ -#define DTC 0xA0 /* DRAM Throttling Control (0x00000000) */ - -#define DRT_CAS_MASK (3 << 5) -#define DRT_CAS_2_0 (1 << 5) -#define DRT_CAS_2_5 (0 << 5) - -#define DRT_TRP_MASK 3 -#define DRT_TRP_4 0 -#define DRT_TRP_3 1 -#define DRT_TRP_2 2 - -#define DRT_RCD_MASK (3 << 2) -#define DRT_RCD_4 (0 << 2) -#define DRT_RCD_3 (1 << 2) -#define DRT_RCD_2 (2 << 2) - -#define DRT_TRAS_MIN_MASK (3 << 9) -#define DRT_TRAS_MIN_8 (0 << 9) -#define DRT_TRAS_MIN_7 (1 << 9) -#define DRT_TRAS_MIN_6 (2 << 9) -#define DRT_TRAS_MIN_5 (3 << 9) - -#endif /* NORTHBRIDGE_INTEL_I855_I855_H */ diff --git a/src/northbridge/intel/i855/northbridge.c b/src/northbridge/intel/i855/northbridge.c deleted file mode 100644 index 3398d66ff4..0000000000 --- a/src/northbridge/intel/i855/northbridge.c +++ /dev/null @@ -1,145 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2003 Ronald G. Minnich - * Copyright (C) 2003-2004 Eric W. Biederman - * Copyright (C) 2006 Jon Dufresne <jon.dufresne@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <arch/io.h> -#include <stdint.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <stdlib.h> -#include <string.h> -#include <cbmem.h> -#include <cpu/x86/cache.h> -#include <cpu/cpu.h> - -static void northbridge_init(device_t dev) -{ - printk(BIOS_SPEW, "Northbridge init\n"); -} - -static struct device_operations northbridge_operations = { - .read_resources = pci_dev_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_dev_enable_resources, - .init = northbridge_init, - .enable = 0, - .ops_pci = 0, -}; - -static const struct pci_driver northbridge_driver __pci_driver = { - .ops = &northbridge_operations, - .vendor = PCI_VENDOR_ID_INTEL, - .device = 0x3580, -}; - -static void pci_domain_set_resources(device_t dev) -{ - device_t mc_dev; - uint32_t pci_tolm; - - printk(BIOS_DEBUG, "Entered with dev vid = %x\n", dev->vendor); - printk(BIOS_DEBUG, "Entered with dev did = %x\n", dev->device); - - pci_tolm = find_pci_tolm(dev->link_list); - mc_dev = dev->link_list->children->sibling; - printk(BIOS_DEBUG, "MC dev vendor = %x\n", mc_dev->vendor); - printk(BIOS_DEBUG, "MC dev device = %x\n", mc_dev->device); - - if (mc_dev) { - /* Figure out which areas are/should be occupied by RAM. - * This is all computed in kilobytes and converted to/from - * the memory controller right at the edges. - * Having different variables in different units is - * too confusing to get right. Kilobytes are good up to - * 4 Terabytes of RAM... - */ - unsigned long tomk, tolmk; - int idx; - - /* Get the value of the highest DRB. This tells the end of - * the physical memory. The units are ticks of 32MB - * i.e. 1 means 32MB. - */ - tomk = (unsigned long)pci_read_config8(mc_dev, 0x43); - tomk = tomk * 32 * 1024; - /* add vga_mem detection */ - tomk = tomk - 16 * 1024; - /* Compute the top of Low memory */ - tolmk = pci_tolm >> 10; - if (tolmk >= tomk) { - /* The PCI hole does not overlap memory - */ - tolmk = tomk; - } - /* Write the RAM configuration registers, - * preserving the reserved bits. - */ - - /* Report the memory regions */ - printk(BIOS_DEBUG, "tomk = %ld\n", tomk); - printk(BIOS_DEBUG, "tolmk = %ld\n", tolmk); - - idx = 10; - /* avoid pam region */ - ram_resource(dev, idx++, 0, 640); - /* ram_resource(dev, idx++, 1024, tolmk - 1024); */ - ram_resource(dev, idx++, 768, tolmk - 768); - - set_late_cbmem_top(tomk * 1024); - } - assign_resources(dev->link_list); -} - -static struct device_operations pci_domain_ops = { - .read_resources = pci_domain_read_resources, - .set_resources = pci_domain_set_resources, - .enable_resources = NULL, - .init = NULL, - .scan_bus = pci_domain_scan_bus, - .ops_pci_bus = pci_bus_default_ops, -}; - -static void cpu_bus_init(device_t dev) -{ - initialize_cpus(dev->link_list); -} - -static struct device_operations cpu_bus_ops = { - .read_resources = DEVICE_NOOP, - .set_resources = DEVICE_NOOP, - .enable_resources = DEVICE_NOOP, - .init = cpu_bus_init, - .scan_bus = 0, -}; - -static void enable_dev(struct device *dev) -{ - /* Set the operations if it is a special bus type */ - if (dev->path.type == DEVICE_PATH_DOMAIN) { - dev->ops = &pci_domain_ops; - } - else if (dev->path.type == DEVICE_PATH_CPU_CLUSTER) { - dev->ops = &cpu_bus_ops; - } -} - -struct chip_operations northbridge_intel_i855_ops = { - CHIP_NAME("Intel 855 Northbridge") - .enable_dev = enable_dev, -}; diff --git a/src/northbridge/intel/i855/raminit.c b/src/northbridge/intel/i855/raminit.c deleted file mode 100644 index 8041951c6f..0000000000 --- a/src/northbridge/intel/i855/raminit.c +++ /dev/null @@ -1,980 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 Jon Dufresne <jon.dufresne@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <assert.h> -#include <lib.h> -#include <spd.h> -#include <sdram_mode.h> -#include <stdlib.h> -#include <delay.h> -#include "i855.h" - -/*----------------------------------------------------------------------------- -Macros and definitions: ------------------------------------------------------------------------------*/ - -#define VALIDATE_DIMM_COMPATIBILITY - -/* Debugging macros. */ -#if IS_ENABLED(CONFIG_DEBUG_RAM_SETUP) -#define PRINTK_DEBUG(x...) printk(BIOS_DEBUG, x) -#define DUMPNORTH() dump_pci_device(NORTHBRIDGE_MMC) -#else -#define PRINTK_DEBUG(x...) -#define DUMPNORTH() -#endif - -#define delay() udelay(200) - -#define VG85X_MODE (SDRAM_BURST_4 | SDRAM_BURST_INTERLEAVED | SDRAM_CAS_2_5) - -/* DRC[10:8] - Refresh Mode Select (RMS). - * 0x0 for Refresh Disabled (Self Refresh) - * 0x1 for Refresh interval 15.6 us for 133MHz - * 0x2 for Refresh interval 7.8 us for 133MHz - * 0x7 for Refresh interval 64 Clocks. (Fast Refresh Mode) - */ -#define RAM_COMMAND_REFRESH 0x1 - -/* DRC[6:4] - SDRAM Mode Select (SMS). */ -#define RAM_COMMAND_SELF_REFRESH 0x0 -#define RAM_COMMAND_NOP 0x1 -#define RAM_COMMAND_PRECHARGE 0x2 -#define RAM_COMMAND_MRS 0x3 -#define RAM_COMMAND_EMRS 0x4 -#define RAM_COMMAND_CBR 0x6 -#define RAM_COMMAND_NORMAL 0x7 - -/* DRC[29] - Initialization Complete (IC). */ -#define RAM_COMMAND_IC 0x1 - -struct dimm_size { - unsigned int side1; - unsigned int side2; -}; - -static const uint32_t refresh_frequency[] = { - /* Relative frequency (array value) of each E7501 Refresh Mode Select - * (RMS) value (array index) - * 0 == least frequent refresh (longest interval between refreshes) - * [0] disabled -> 0 - * [1] 15.6 usec -> 2 - * [2] 7.8 usec -> 3 - * [3] 64 usec -> 1 - * [4] reserved -> 0 - * [5] reserved -> 0 - * [6] reserved -> 0 - * [7] 64 clocks -> 4 - */ - 0, 2, 3, 1, 0, 0, 0, 4 -}; - -static const uint32_t refresh_rate_map[] = { - /* Map the JEDEC spd refresh rates (array index) to i855 Refresh Mode - * Select values (array value) - * These are all the rates defined by JESD21-C Appendix D, Rev. 1.0 - * The i855 supports only 15.6 us (1), 7.8 us (2) and - * 64 clock (481 ns) (7) refresh. - * [0] == 15.625 us -> 15.6 us - * [1] == 3.9 us -> 481 ns - * [2] == 7.8 us -> 7.8 us - * [3] == 31.3 us -> 15.6 us - * [4] == 62.5 us -> 15.6 us - * [5] == 125 us -> 15.6 us - */ - 1, 7, 2, 1, 1, 1 -}; - -#define MAX_SPD_REFRESH_RATE ((sizeof(refresh_rate_map) / sizeof(uint32_t)) - 1) - -/*----------------------------------------------------------------------------- -SPD functions: ------------------------------------------------------------------------------*/ - -static void die_on_spd_error(int spd_return_value) -{ - if (spd_return_value < 0) - PRINTK_DEBUG("Error reading SPD info: got %d\n", spd_return_value); -/* - if (spd_return_value < 0) - die("Error reading SPD info\n"); -*/ -} - -/** - * Calculate the page size for each physical bank of the DIMM: - * - * log2(page size) = (# columns) + log2(data width) - * - * NOTE: Page size is the total number of data bits in a row. - * - * @param dimm_socket_address SMBus address of DIMM socket to interrogate. - * @return log2(page size) for each side of the DIMM. - */ -static struct dimm_size sdram_spd_get_page_size(u8 dimm_socket_address) -{ - uint16_t module_data_width; - int value; - struct dimm_size pgsz; - - pgsz.side1 = 0; - pgsz.side2 = 0; - - // Side 1 - value = spd_read_byte(dimm_socket_address, SPD_NUM_COLUMNS); - die_on_spd_error(value); - - pgsz.side1 = value & 0xf; // # columns in bank 1 - - /* Get the module data width and convert it to a power of two */ - value = spd_read_byte(dimm_socket_address, SPD_MODULE_DATA_WIDTH_MSB); - die_on_spd_error(value); - - module_data_width = (value & 0xff) << 8; - - value = spd_read_byte(dimm_socket_address, SPD_MODULE_DATA_WIDTH_LSB); - die_on_spd_error(value); - - module_data_width |= (value & 0xff); - - pgsz.side1 += log2(module_data_width); - - /* side two */ - value = spd_read_byte(dimm_socket_address, SPD_NUM_DIMM_BANKS); - die_on_spd_error(value); - -/* - if (value > 2) - die("Bad SPD value\n"); -*/ - if (value > 2) - PRINTK_DEBUG("Bad SPD value\n"); - - if (value == 2) { - pgsz.side2 = pgsz.side1; // Assume symmetric banks until we know differently - value = spd_read_byte(dimm_socket_address, SPD_NUM_COLUMNS); - die_on_spd_error(value); - - if ((value & 0xf0) != 0) { - // Asymmetric banks - pgsz.side2 -= value & 0xf; /* Subtract out columns on side 1 */ - pgsz.side2 += (value >> 4) & 0xf; /* Add in columns on side 2 */ - } - } - - return pgsz; -} - -/** - * Read the width in bits of each DIMM side's DRAMs via SPD (i.e. 4, 8, 16). - * - * @param dimm_socket_address SMBus address of DIMM socket to interrogate. - * @return Width in bits of each DIMM side's DRAMs. - */ -static struct dimm_size sdram_spd_get_width(u8 dimm_socket_address) -{ - int value; - struct dimm_size width; - - width.side1 = 0; - width.side2 = 0; - - value = spd_read_byte(dimm_socket_address, SPD_PRIMARY_SDRAM_WIDTH); - die_on_spd_error(value); - - width.side1 = value & 0x7f; // Mask off bank 2 flag - - if (value & 0x80) { - width.side2 = width.side1 << 1; // Bank 2 exists and is double-width - } else { - // If bank 2 exists, it's the same width as bank 1 - value = spd_read_byte(dimm_socket_address, SPD_NUM_DIMM_BANKS); - die_on_spd_error(value); - -#ifdef ROMCC_IF_BUG_FIXED - if (value == 2) - width.side2 = width.side1; -#else - switch (value) { - case 2: - width.side2 = width.side1; - break; - - default: - break; - } -#endif - } - - return width; -} - -/** - * Calculate the log base 2 size in bits of both DIMM sides. - * - * log2(# bits) = (# columns) + log2(data width) + - * (# rows) + log2(banks per SDRAM) - * - * Note that it might be easier to use SPD byte 31 here, it has the DIMM size - * as a multiple of 4MB. The way we do it now we can size both sides of an - * asymmetric DIMM. - * - * @param dimm SMBus address of DIMM socket to interrogate. - * @return log2(number of bits) for each side of the DIMM. - */ -static struct dimm_size spd_get_dimm_size(unsigned dimm) -{ - int value; - - // Start with log2(page size) - struct dimm_size sz = sdram_spd_get_page_size(dimm); - - if (sz.side1 > 0) { - value = spd_read_byte(dimm, SPD_NUM_ROWS); - die_on_spd_error(value); - - sz.side1 += value & 0xf; - - if (sz.side2 > 0) { - // Double-sided DIMM - if (value & 0xF0) - sz.side2 += value >> 4; // Asymmetric - else - sz.side2 += value; // Symmetric - } - - value = spd_read_byte(dimm, SPD_NUM_BANKS_PER_SDRAM); - die_on_spd_error(value); - - value = log2(value); - sz.side1 += value; - if (sz.side2 > 0) - sz.side2 += value; - } - - return sz; -} - -/** - * Scan for compatible DIMMs. - * - * @return A bitmask indicating which sockets contain a compatible DIMM. - */ -static uint8_t spd_get_supported_dimms(void) -{ - int i; - uint8_t dimm_mask = 0; - - for (i = 0; i < DIMM_SOCKETS; i++) { - u8 dimm = DIMM0 + i; - -#ifdef VALIDATE_DIMM_COMPATIBILITY - struct dimm_size page_size; - struct dimm_size sdram_width; -#endif - int spd_value; - - if (dimm == 0) - continue; // No such socket on this mainboard - - if (spd_read_byte(dimm, SPD_MEMORY_TYPE) != SPD_MEMORY_TYPE_SDRAM_DDR) - continue; - -#ifdef VALIDATE_DIMM_COMPATIBILITY - if ((spd_value = spd_read_byte(dimm, SPD_MODULE_VOLTAGE)) != SPD_VOLTAGE_SSTL2) { - PRINTK_DEBUG("Skipping DIMM with unsupported voltage: %02x\n", spd_value); - continue; // Unsupported voltage - } - -/* - // E7501 does not support unregistered DIMMs - spd_value = spd_read_byte(dimm, SPD_MODULE_ATTRIBUTES); - if (!(spd_value & MODULE_REGISTERED) || (spd_value < 0)) { - PRINTK_DEBUG("Skipping unregistered DIMM: %02x\n", spd_value); - continue; - } -*/ - - page_size = sdram_spd_get_page_size(dimm); - sdram_width = sdram_spd_get_width(dimm); - - // Validate DIMM page size - // The i855 only supports page sizes of 4, 8, 16 KB per channel - // NOTE: 4 KB = 32 Kb = 2^15 - // 16 KB = 128 Kb = 2^17 - - if ((page_size.side1 < 15) || (page_size.side1 > 17)) { - PRINTK_DEBUG("Skipping DIMM with unsupported page size: %d\n", page_size.side1); - continue; - } - - // If DIMM is double-sided, verify side2 page size - if (page_size.side2 != 0) { - if ((page_size.side2 < 15) || (page_size.side2 > 17)) { - PRINTK_DEBUG("Skipping DIMM with unsupported page size: %d\n", page_size.side2); - continue; - } - } - // Validate SDRAM width - // The i855 only supports x8 and x16 devices - if ((sdram_width.side1 != 8) && (sdram_width.side1 != 16)) { - PRINTK_DEBUG("Skipping DIMM with unsupported width: %d\n", sdram_width.side2); - continue; - } - - // If DIMM is double-sided, verify side2 width - if (sdram_width.side2 != 0) { - if ((sdram_width.side2 != 8) - && (sdram_width.side2 != 16)) { - PRINTK_DEBUG("Skipping DIMM with unsupported width: %d\n", sdram_width.side2); - continue; - } - } -#endif - // Made it through all the checks, this DIMM is usable - dimm_mask |= (1 << i); - } - - return dimm_mask; -} - -/*----------------------------------------------------------------------------- -SDRAM configuration functions: ------------------------------------------------------------------------------*/ - -static void do_ram_command(uint8_t command, uint16_t jedec_mode_bits) -{ - int i; - u32 reg32; - uint8_t dimm_start_32M_multiple = 0; - uint16_t i855_mode_bits = jedec_mode_bits; - - /* Configure the RAM command. */ - reg32 = pci_read_config32(NORTHBRIDGE_MMC, DRC); - reg32 &= ~(7 << 4); - reg32 |= (command << 4); - PRINTK_DEBUG(" Sending RAM command 0x%08x\n", reg32); - pci_write_config32(NORTHBRIDGE_MMC, DRC, reg32); - - // RAM_COMMAND_NORMAL is an exception. - // It affects only the memory controller and does not need to be "sent" to the DIMMs. - - if (command != RAM_COMMAND_NORMAL) { - - // Send the command to all DIMMs by accessing a memory location within each - // NOTE: for mode select commands, some of the location address bits - // are part of the command - - // Map JEDEC mode bits to i855 - if (command == RAM_COMMAND_MRS || command == RAM_COMMAND_EMRS) { - /* Host address lines [13:3] map to DIMM address lines [11, 9:0] */ - i855_mode_bits = ((jedec_mode_bits & 0x800) << (13 - 11)) | ((jedec_mode_bits & 0x3ff) << (12 - 9)); - } - - for (i = 0; i < (DIMM_SOCKETS * 2); ++i) { - uint8_t dimm_end_32M_multiple = pci_read_config8(NORTHBRIDGE_MMC, DRB + i); - if (dimm_end_32M_multiple > dimm_start_32M_multiple) { - - uint32_t dimm_start_address = dimm_start_32M_multiple << 25; - PRINTK_DEBUG(" Sending RAM command to 0x%08x\n", dimm_start_address + i855_mode_bits); - read32((void *)(dimm_start_address + i855_mode_bits)); - - // Set the start of the next DIMM - dimm_start_32M_multiple = dimm_end_32M_multiple; - } - } - } -} - -static void set_initialize_complete(void) -{ - uint32_t drc_reg; - - drc_reg = pci_read_config32(NORTHBRIDGE_MMC, DRC); - drc_reg |= (1 << 29); - pci_write_config32(NORTHBRIDGE_MMC, DRC, drc_reg); -} - -static void sdram_enable(void) -{ - int i; - - printk(BIOS_DEBUG, "Ram enable 1\n"); - delay(); - delay(); - - /* NOP command */ - PRINTK_DEBUG(" NOP\n"); - do_ram_command(RAM_COMMAND_NOP, 0); - delay(); - delay(); - delay(); - - /* Pre-charge all banks (at least 200 us after NOP) */ - PRINTK_DEBUG(" Pre-charging all banks\n"); - do_ram_command(RAM_COMMAND_PRECHARGE, 0); - delay(); - delay(); - delay(); - - printk(BIOS_DEBUG, "Ram enable 4\n"); - do_ram_command(RAM_COMMAND_EMRS, SDRAM_EXTMODE_DLL_ENABLE); - delay(); - delay(); - delay(); - - printk(BIOS_DEBUG, "Ram enable 5\n"); - do_ram_command(RAM_COMMAND_MRS, VG85X_MODE | SDRAM_MODE_DLL_RESET); - - printk(BIOS_DEBUG, "Ram enable 6\n"); - do_ram_command(RAM_COMMAND_PRECHARGE, 0); - delay(); - delay(); - delay(); - - /* 8 CBR refreshes (Auto Refresh) */ - PRINTK_DEBUG(" 8 CBR refreshes\n"); - for (i = 0; i < 8; i++) { - do_ram_command(RAM_COMMAND_CBR, 0); - delay(); - delay(); - delay(); - } - - printk(BIOS_DEBUG, "Ram enable 8\n"); - do_ram_command(RAM_COMMAND_MRS, VG85X_MODE | SDRAM_MODE_NORMAL); - - /* Set GME-M Mode Select bits back to NORMAL operation mode */ - PRINTK_DEBUG(" Normal operation mode\n"); - do_ram_command(RAM_COMMAND_NORMAL, 0); - delay(); - delay(); - delay(); - - printk(BIOS_DEBUG, "Ram enable 9\n"); - set_initialize_complete(); - - delay(); - delay(); - delay(); - delay(); - delay(); - - printk(BIOS_DEBUG, "After configuration:\n"); - /* dump_pci_devices(); */ - - /* - printk(BIOS_DEBUG, "\n\n***** RAM TEST *****\n"); - ram_check(0, 0xa0000); - ram_check(0x100000, 0x40000000); - */ -} - -/*----------------------------------------------------------------------------- -DIMM-independent configuration functions: ------------------------------------------------------------------------------*/ - -/** - * Set only what I need until it works, then make it figure things out on boot - * assumes only one DIMM is populated. - */ -static void sdram_set_registers(void) -{ - /* - printk(BIOS_DEBUG, "Before configuration:\n"); - dump_pci_devices(); - */ -} - -static void spd_set_row_attributes(uint8_t dimm_mask) -{ - int i; - uint16_t row_attributes = 0; - - for (i = 0; i < DIMM_SOCKETS; i++) { - u8 dimm = DIMM0 + i; - struct dimm_size page_size; - struct dimm_size sdram_width; - - if (!(dimm_mask & (1 << i))) { - row_attributes |= 0x77 << (i << 3); - continue; // This DIMM not usable - } - - // Get the relevant parameters via SPD - page_size = sdram_spd_get_page_size(dimm); - sdram_width = sdram_spd_get_width(dimm); - - // Update the DRAM Row Attributes. - // Page size is encoded as log2(page size in bits) - log2(2 KB) or 4 KB == 1, 8 KB == 3, 16KB == 3 - // NOTE: 2 KB = 16 Kb = 2^14 - row_attributes |= (page_size.side1 - 14) << (i << 3); // Side 1 of each DIMM is an EVEN row - - if (sdram_width.side2 > 0) - row_attributes |= (page_size.side2 - 14) << ((i << 3) + 4); // Side 2 is ODD - else - row_attributes |= 7 << ((i << 3) + 4); - /* go to the next DIMM */ - } - - PRINTK_DEBUG("DRA: %04x\n", row_attributes); - - /* Write the new row attributes register */ - pci_write_config16(NORTHBRIDGE_MMC, DRA, row_attributes); -} - -static void spd_set_dram_controller_mode(uint8_t dimm_mask) -{ - int i; - - // Initial settings - u32 controller_mode = pci_read_config32(NORTHBRIDGE_MMC, DRC); - u32 system_refresh_mode = (controller_mode >> 7) & 7; - - controller_mode |= (1 << 20); // ECC - controller_mode |= (1 << 15); // RAS lockout - controller_mode |= (1 << 12); // Address Tri-state enable (ADRTRIEN), FIXME: how is this detected????? - controller_mode |= (2 << 10); // FIXME: Undocumented, really needed????? - - for (i = 0; i < DIMM_SOCKETS; i++) { - u8 dimm = DIMM0 + i; - uint32_t dimm_refresh_mode; - int value; - u8 tRCD, tRP; - - if (!(dimm_mask & (1 << i))) { - continue; // This DIMM not usable - } - - // Disable ECC mode if any one of the DIMMs does not support ECC - value = spd_read_byte(dimm, SPD_DIMM_CONFIG_TYPE); - die_on_spd_error(value); - if (value != ERROR_SCHEME_ECC) - controller_mode &= ~(3 << 20); - - value = spd_read_byte(dimm, SPD_REFRESH); - die_on_spd_error(value); - value &= 0x7f; // Mask off self-refresh bit - if (value > MAX_SPD_REFRESH_RATE) { - printk(BIOS_ERR, "unsupported refresh rate\n"); - continue; - } - // Get the appropriate i855 refresh mode for this DIMM - dimm_refresh_mode = refresh_rate_map[value]; - if (dimm_refresh_mode > 7) { - printk(BIOS_ERR, "unsupported refresh rate\n"); - continue; - } - // If this DIMM requires more frequent refresh than others, - // update the system setting - if (refresh_frequency[dimm_refresh_mode] > - refresh_frequency[system_refresh_mode]) - system_refresh_mode = dimm_refresh_mode; - - /* FIXME: is this correct? */ - tRCD = spd_read_byte(dimm, SPD_tRCD); - tRP = spd_read_byte(dimm, SPD_tRP); - if (tRCD != tRP) { - PRINTK_DEBUG(" Disabling RAS lockout due to tRCD (%d) != tRP (%d)\n", tRCD, tRP); - controller_mode &= ~(1 << 15); - } - - /* go to the next DIMM */ - } - - controller_mode &= ~(7 << 7); - controller_mode |= (system_refresh_mode << 7); - PRINTK_DEBUG("DRC: %08x\n", controller_mode); - - pci_write_config32(NORTHBRIDGE_MMC, DRC, controller_mode); -} - -static void spd_set_dram_timing(uint8_t dimm_mask) -{ - int i; - u32 dram_timing; - - // CAS# latency bitmasks in SPD_ACCEPTABLE_CAS_LATENCIES format - // NOTE: i82822 supports only 2.0 and 2.5 - uint32_t system_compatible_cas_latencies = SPD_CAS_LATENCY_2_0 | SPD_CAS_LATENCY_2_5; - uint8_t slowest_row_precharge = 0; - uint8_t slowest_ras_cas_delay = 0; - uint8_t slowest_active_to_precharge_delay = 0; - - for (i = 0; i < DIMM_SOCKETS; i++) { - u8 dimm = DIMM0 + i; - int value; - uint32_t current_cas_latency; - uint32_t dimm_compatible_cas_latencies; - if (!(dimm_mask & (1 << i))) - continue; // This DIMM not usable - - value = spd_read_byte(dimm, SPD_ACCEPTABLE_CAS_LATENCIES); - PRINTK_DEBUG("SPD_ACCEPTABLE_CAS_LATENCIES: %d\n", value); - die_on_spd_error(value); - - dimm_compatible_cas_latencies = value & 0x7f; // Start with all supported by DIMM - PRINTK_DEBUG("dimm_compatible_cas_latencies #1: %d\n", dimm_compatible_cas_latencies); - - current_cas_latency = 1 << log2(dimm_compatible_cas_latencies); // Max supported by DIMM - PRINTK_DEBUG("current_cas_latency: %d\n", current_cas_latency); - - // Can we support the highest CAS# latency? - value = spd_read_byte(dimm, SPD_MIN_CYCLE_TIME_AT_CAS_MAX); - die_on_spd_error(value); - PRINTK_DEBUG("SPD_MIN_CYCLE_TIME_AT_CAS_MAX: %d.%d\n", value >> 4, value & 0xf); - - // NOTE: At 133 MHz, 1 clock == 7.52 ns - if (value > 0x75) { - // Our bus is too fast for this CAS# latency - // Remove it from the bitmask of those supported by the DIMM that are compatible - dimm_compatible_cas_latencies &= ~current_cas_latency; - PRINTK_DEBUG("dimm_compatible_cas_latencies #2: %d\n", dimm_compatible_cas_latencies); - } - // Can we support the next-highest CAS# latency (max - 0.5)? - - current_cas_latency >>= 1; - if (current_cas_latency != 0) { - value = spd_read_byte(dimm, SPD_SDRAM_CYCLE_TIME_2ND); - die_on_spd_error(value); - PRINTK_DEBUG("SPD_SDRAM_CYCLE_TIME_2ND: %d.%d\n", value >> 4, value & 0xf); - if (value > 0x75) { - dimm_compatible_cas_latencies &= ~current_cas_latency; - PRINTK_DEBUG("dimm_compatible_cas_latencies #2: %d\n", dimm_compatible_cas_latencies); - } - } - // Can we support the next-highest CAS# latency (max - 1.0)? - current_cas_latency >>= 1; - if (current_cas_latency != 0) { - value = spd_read_byte(dimm, SPD_SDRAM_CYCLE_TIME_3RD); - PRINTK_DEBUG("SPD_SDRAM_CYCLE_TIME_3RD: %d.%d\n", value >> 4, value & 0xf); - die_on_spd_error(value); - if (value > 0x75) { - dimm_compatible_cas_latencies &= ~current_cas_latency; - PRINTK_DEBUG("dimm_compatible_cas_latencies #2: %d\n", dimm_compatible_cas_latencies); - } - } - // Restrict the system to CAS# latencies compatible with this DIMM - system_compatible_cas_latencies &= dimm_compatible_cas_latencies; - - value = spd_read_byte(dimm, SPD_MIN_ROW_PRECHARGE_TIME); - die_on_spd_error(value); - if (value > slowest_row_precharge) - slowest_row_precharge = value; - - value = spd_read_byte(dimm, SPD_MIN_RAS_TO_CAS_DELAY); - die_on_spd_error(value); - if (value > slowest_ras_cas_delay) - slowest_ras_cas_delay = value; - - value = spd_read_byte(dimm, SPD_MIN_ACTIVE_TO_PRECHARGE_DELAY); - die_on_spd_error(value); - if (value > slowest_active_to_precharge_delay) - slowest_active_to_precharge_delay = value; - - /* go to the next DIMM */ - } - PRINTK_DEBUG("CAS latency: %d\n", system_compatible_cas_latencies); - - dram_timing = pci_read_config32(NORTHBRIDGE_MMC, DRT); - dram_timing &= ~(DRT_CAS_MASK | DRT_TRP_MASK | DRT_RCD_MASK); - PRINTK_DEBUG("DRT: %08x\n", dram_timing); - - if (system_compatible_cas_latencies & SPD_CAS_LATENCY_2_0) { - dram_timing |= DRT_CAS_2_0; - } else if (system_compatible_cas_latencies & SPD_CAS_LATENCY_2_5) { - dram_timing |= DRT_CAS_2_5; - } else - die("No CAS# latencies compatible with all DIMMs!!\n"); - - uint32_t current_cas_latency = dram_timing & DRT_CAS_MASK; - - /* tRP */ - - PRINTK_DEBUG("slowest_row_precharge: %d.%d\n", slowest_row_precharge >> 2, slowest_row_precharge & 0x3); - // i855 supports only 2, 3 or 4 clocks for tRP - if (slowest_row_precharge > ((30 << 2))) - die("unsupported DIMM tRP"); // > 30.0 ns: 5 or more clocks - else if (slowest_row_precharge > ((22 << 2) | (2 << 0))) - dram_timing |= DRT_TRP_4; // > 22.5 ns: 4 or more clocks - else if (slowest_row_precharge > (15 << 2)) - dram_timing |= DRT_TRP_3; // > 15.0 ns: 3 clocks - else - dram_timing |= DRT_TRP_2; // <= 15.0 ns: 2 clocks - - /* tRCD */ - - PRINTK_DEBUG("slowest_ras_cas_delay: %d.%d\n", slowest_ras_cas_delay >> 2, slowest_ras_cas_delay & 0x3); - // i855 supports only 2, 3 or 4 clocks for tRCD - if (slowest_ras_cas_delay > ((30 << 2))) - die("unsupported DIMM tRCD"); // > 30.0 ns: 5 or more clocks - else if (slowest_ras_cas_delay > ((22 << 2) | (2 << 0))) - dram_timing |= DRT_RCD_4; // > 22.5 ns: 4 or more clocks - else if (slowest_ras_cas_delay > (15 << 2)) - dram_timing |= DRT_RCD_3; // > 15.0 ns: 3 clocks - else - dram_timing |= DRT_RCD_2; // <= 15.0 ns: 2 clocks - - /* tRAS, min */ - - PRINTK_DEBUG("slowest_active_to_precharge_delay: %d\n", slowest_active_to_precharge_delay); - // i855 supports only 5, 6, 7 or 8 clocks for tRAS - // 5 clocks ~= 37.6 ns, 6 clocks ~= 45.1 ns, 7 clocks ~= 52.6 ns, 8 clocks ~= 60.1 ns - if (slowest_active_to_precharge_delay > 60) - die("unsupported DIMM tRAS"); // > 52 ns: 8 or more clocks - else if (slowest_active_to_precharge_delay > 52) - dram_timing |= DRT_TRAS_MIN_8; // 46-52 ns: 7 clocks - else if (slowest_active_to_precharge_delay > 45) - dram_timing |= DRT_TRAS_MIN_7; // 46-52 ns: 7 clocks - else if (slowest_active_to_precharge_delay > 37) - dram_timing |= DRT_TRAS_MIN_6; // 38-45 ns: 6 clocks - else - dram_timing |= DRT_TRAS_MIN_5; // < 38 ns: 5 clocks - - /* FIXME: guess work starts here... - * - * Intel refers to DQ turn-around values for back to calculate the values, - * but i have no idea what this means - */ - - /* - * Back to Back Read-Write command spacing (DDR, different Rows/Bank) - */ - /* Set to a 3 clock back to back read to write turn around. - * 2 is a good delay if the CAS latency is 2.0 */ - dram_timing &= ~(3 << 28); - if (current_cas_latency == DRT_CAS_2_0) - dram_timing |= (2 << 28); // 2 clocks - else - dram_timing |= (1 << 28); // 3 clocks - - /* - * Back to Back Read-Write command spacing (DDR, same or different Rows/Bank) - */ - dram_timing &= ~(3 << 26); - if (current_cas_latency == DRT_CAS_2_0) - dram_timing |= (2 << 26); // 5 clocks - else - dram_timing |= (1 << 26); // 6 clocks - - /* - * Back To Back Read-Read commands spacing (DDR, different Rows): - */ - dram_timing &= ~(1 << 25); - dram_timing |= (1 << 25); // 3 clocks - - PRINTK_DEBUG("DRT: %08x\n", dram_timing); - pci_write_config32(NORTHBRIDGE_MMC, DRT, dram_timing); -} - -static void spd_set_dram_size(uint8_t dimm_mask) -{ - int i; - int total_dram = 0; - uint32_t drb_reg = 0; - - for (i = 0; i < DIMM_SOCKETS; i++) { - u8 dimm = DIMM0 + i; - struct dimm_size sz; - - if (!(dimm_mask & (1 << i))) { - /* fill values even for not present DIMMs */ - drb_reg |= (total_dram << (i * 16)); - drb_reg |= (total_dram << ((i * 16) + 8)); - - continue; // This DIMM not usable - } - sz = spd_get_dimm_size(dimm); - - total_dram += (1 << (sz.side1 - 28)); - drb_reg |= (total_dram << (i * 16)); - - total_dram += (1 << (sz.side2 - 28)); - drb_reg |= (total_dram << ((i * 16) + 8)); - } - PRINTK_DEBUG("DRB: %08x\n", drb_reg); - pci_write_config32(NORTHBRIDGE_MMC, DRB, drb_reg); -} - - -static void spd_set_dram_pwr_management(void) -{ - uint32_t pwrmg_reg; - - pwrmg_reg = 0x10f10430; - pci_write_config32(NORTHBRIDGE_MMC, PWRMG, pwrmg_reg); -} - -static void spd_set_dram_throttle_control(void) -{ - uint32_t dtc_reg = 0; - - /* DDR SDRAM Throttle Mode (TMODE): - * 0011 = Both Rank and GMCH Thermal Sensor based throttling is enabled. When the external SO- - * DIMM Thermal Sensor is Tripped DDR SDRAM Throttling begins based on the setting in RTT - */ - dtc_reg |= (3 << 28); - - /* Read Counter Based Power Throttle Control (RCTC): - * 0 = 85% - */ - dtc_reg |= (0 << 24); - - /* Write Counter Based Power Throttle Control (WCTC): - * 0 = 85% - */ - dtc_reg |= (0 << 20); - - /* Read Thermal Based Power Throttle Control (RTTC): - * 0xA = 20% - */ - dtc_reg |= (0xA << 16); - - /* Write Thermal Based Power Throttle Control (WTTC): - * 0xA = 20% - */ - dtc_reg |= (0xA << 12); - - /* Counter Based Throttle Lock (CTLOCK): */ - dtc_reg |= (0 << 11); - - /* Thermal Throttle Lock (TTLOCK): */ - dtc_reg |= (0 << 10); - - /* Thermal Power Throttle Control fields Enable: */ - dtc_reg |= (1 << 9); - - /* High Priority Stream Throttling Enable: */ - dtc_reg |= (0 << 8); - - /* Global DDR SDRAM Sampling Window (GDSW): */ - dtc_reg |= 0xff; - PRINTK_DEBUG("DTC: %08x\n", dtc_reg); - pci_write_config32(NORTHBRIDGE_MMC, DTC, dtc_reg); -} - -static void spd_update(u8 reg, u32 new_value) -{ -#if IS_ENABLED(CONFIG_DEBUG_RAM_SETUP) - u32 value1 = pci_read_config32(NORTHBRIDGE_MMC, reg); -#endif - pci_write_config32(NORTHBRIDGE_MMC, reg, new_value); -#if IS_ENABLED(CONFIG_DEBUG_RAM_SETUP) - u32 value2 = pci_read_config32(NORTHBRIDGE_MMC, reg); - PRINTK_DEBUG("update reg %02x, old: %08x, new: %08x, read back: %08x\n", reg, value1, new_value, value2); -#endif -} - -/* if RAM still doesn't work do this function */ -static void spd_set_undocumented_registers(void) -{ - spd_update(0x74, 0x00000001); - spd_update(0x78, 0x001fe974); - spd_update(0x80, 0x00af0039); - spd_update(0x84, 0x0000033c); - spd_update(0x88, 0x00000010); - - spd_update(0xc0, 0x00000003); -} - -static void northbridge_set_registers(void) -{ - u16 value; - int video_memory = 0; - - printk(BIOS_DEBUG, "Setting initial Northbridge registers....\n"); - - /* Set the value for Fixed DRAM Hole Control Register */ - pci_write_config8(NORTHBRIDGE, FDHC, 0x00); - - /* Set the value for Programmable Attribute Map Registers - * Ideally, this should be R/W for as many ranges as possible. - */ - pci_write_config8(NORTHBRIDGE, PAM0, 0x30); - pci_write_config8(NORTHBRIDGE, PAM1, 0x33); - pci_write_config8(NORTHBRIDGE, PAM2, 0x33); - pci_write_config8(NORTHBRIDGE, PAM3, 0x33); - pci_write_config8(NORTHBRIDGE, PAM4, 0x33); - pci_write_config8(NORTHBRIDGE, PAM5, 0x33); - pci_write_config8(NORTHBRIDGE, PAM6, 0x33); - - /* Set the value for System Management RAM Control Register */ - pci_write_config8(NORTHBRIDGE, SMRAM, 0x02); - - /* Set the value for GMCH Control Register #1 */ - switch (CONFIG_VIDEO_MB) { - case 1: /* 1M of memory */ - video_memory = 0x1; - break; - case 4: /* 4M of memory */ - video_memory = 0x2; - break; - case 8: /* 8M of memory */ - video_memory = 0x3; - break; - case 16: /* 16M of memory */ - video_memory = 0x4; - break; - case 32: /* 32M of memory */ - video_memory = 0x5; - break; - default: /* No memory */ - pci_write_config16(NORTHBRIDGE, GMC, pci_read_config16(NORTHBRIDGE, GMC) | 1); - video_memory = 0x0; - } - - value = pci_read_config16(NORTHBRIDGE, GGC); - value |= video_memory << 4; - if (video_memory == 0) { - value &= ~(1 < 1); - } else - value |= (1 < 1); - pci_write_config16(NORTHBRIDGE, GGC, value); - - /* AGPCMD: disable AGP, Data-Rate: 1x */ - pci_write_config32(NORTHBRIDGE, AGPCMD, 0x00000001); - - pci_write_config8(NORTHBRIDGE, AMTT, 0x20); - pci_write_config8(NORTHBRIDGE, LPTT, 0x10); - - printk(BIOS_DEBUG, "Initial Northbridge registers have been set.\n"); -} - -static void sdram_set_spd_registers(void) -{ - uint8_t dimm_mask; - - PRINTK_DEBUG("Reading SPD data...\n"); - - dimm_mask = spd_get_supported_dimms(); - - if (dimm_mask == 0) { - printk(BIOS_DEBUG, "No usable memory for this controller\n"); - } else { - PRINTK_DEBUG("DIMM MASK: %02x\n", dimm_mask); - - spd_set_row_attributes(dimm_mask); - spd_set_dram_controller_mode(dimm_mask); - spd_set_dram_timing(dimm_mask); - spd_set_dram_size(dimm_mask); - spd_set_dram_pwr_management(); - spd_set_dram_throttle_control(); - spd_set_undocumented_registers(); - } - - /* Setup Initial Northbridge Registers */ - northbridge_set_registers(); -} diff --git a/src/northbridge/intel/i855/raminit.h b/src/northbridge/intel/i855/raminit.h deleted file mode 100644 index 31f57a1fe3..0000000000 --- a/src/northbridge/intel/i855/raminit.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 Jon Dufresne <jon.dufresne@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef NORTHBRIDGE_INTEL_I855_RAMINIT_H -#define NORTHBRIDGE_INTEL_I855_RAMINIT_H - -/* i855 Northbridge PCI devices */ -#define NORTHBRIDGE PCI_DEV(0, 0, 0) -#define NORTHBRIDGE_MMC PCI_DEV(0, 0, 1) - -/* The i855 supports max. 2 dual-sided SO-DIMMs. */ -#define DIMM_SOCKETS 2 - -void sdram_initialize(void); - -#endif /* NORTHBRIDGE_INTEL_I855_RAMINIT_H */ diff --git a/src/northbridge/intel/i855/reset_test.c b/src/northbridge/intel/i855/reset_test.c deleted file mode 100644 index 9ca7854d47..0000000000 --- a/src/northbridge/intel/i855/reset_test.c +++ /dev/null @@ -1,35 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 Jon Dufresne <jon.dufresne@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#define MCH_DRC 0x70 -#define DRC_DONE (1 << 29) - - /* If I have already booted once skip a bunch of initialization */ - /* To see if I have already booted I check to see if memory - * has been enabled. - */ -static int bios_reset_detected(void) -{ - uint32_t dword; - - dword = pci_read_config32(PCI_DEV(0, 0, 0), MCH_DRC); - - if ( (dword & DRC_DONE) != 0 ) { - return 1; - } - - return 0; -} |