diff options
Diffstat (limited to 'src/northbridge/intel/e7505/raminit.c')
| -rw-r--r-- | src/northbridge/intel/e7505/raminit.c | 164 |
1 files changed, 103 insertions, 61 deletions
diff --git a/src/northbridge/intel/e7505/raminit.c b/src/northbridge/intel/e7505/raminit.c index 29eb42b133..e98a04258a 100644 --- a/src/northbridge/intel/e7505/raminit.c +++ b/src/northbridge/intel/e7505/raminit.c @@ -486,51 +486,109 @@ static inline void local_mdelay(int i) #define EXTRA_DELAY DO_DELAY /*----------------------------------------------------------------------------- -Handle (undocumented) control bits in device 0:6.0 +Handle (undocumented) control bits MCHTST and PCI_DEV(0,6,0) -----------------------------------------------------------------------------*/ +typedef enum { + MCHTST_CMD_0, + D060_ENABLE, + D060_DISABLE, + RCOMP_BAR_ENABLE, + RCOMP_BAR_DISABLE, +} mchtst_cc; + +typedef enum { + D060_CMD_0, + D060_CMD_1, +} d060_cc; + +typedef enum { + RCOMP_HOLD, + RCOMP_RELEASE, + RCOMP_SMR_00, + RCOMP_SMR_01, +} rcomp_smr_cc; /** + * MCHTST - 0xF4 - 0xF7 -- Based on similarity to 855PM * + * [31:31] Purpose unknown + * [30:30] Purpose unknown + * [29:23] Unknown - not used? + * [22:22] System Memory MMR Enable + * 0 == Disable: mem space and BAR at 0x14 are not accessible + * 1 == Enable: mem space and BAR at 0x14 are accessible + * [21:20] Purpose unknown + * [19:02] Unknown - not used? + * [01:01] D6EN (Device #6 enable) + * 0 == Disable + * 1 == Enable + * [00:00] Unknown - not used? */ -static void ram_handle_d060_1(void) +static inline void mchtest_control(mchtst_cc cmd) { - uint32_t dword; - - dword = pci_read_config32(MCHDEV, MCHTST); - dword |= 0x02; + uint32_t dword = pci_read_config32(MCHDEV, MCHTST); + switch (cmd) { + case MCHTST_CMD_0: + dword &= ~(3 << 30); + break; + case RCOMP_BAR_ENABLE: + dword |= (1 << 22); + break; + case RCOMP_BAR_DISABLE: + dword &= ~(1 << 22); + break; + case D060_ENABLE: + dword |= (1 << 1); + break; + case D060_DISABLE: + dword &= ~(1 << 1); + break; + }; pci_write_config32(MCHDEV, MCHTST, dword); +} - dword = pci_read_config32(D060DEV, 0xf0); - dword |= 0x04; - pci_write_config32(D060DEV, 0xf0, dword); - dword = pci_read_config32(MCHDEV, MCHTST); - dword &= ~0x02; - pci_write_config32(MCHDEV, MCHTST, dword); +/** + * + */ +static inline void d060_control(d060_cc cmd) +{ + mchtest_control(D060_ENABLE); + uint32_t dword = pci_read_config32(D060DEV, 0xf0); + switch (cmd) { + case D060_CMD_0: + dword |= (1 << 2); + break; + case D060_CMD_1: + dword |= (3 << 27); + break; + } + pci_write_config32(D060DEV, 0xf0, dword); + mchtest_control(D060_DISABLE); } /** * */ -static void ram_handle_d060_2(void) +static inline void rcomp_smr_control(rcomp_smr_cc cmd) { - uint32_t dword; - uint8_t revision; - - revision = pci_read_config8(MCHDEV, 0x08); - if (revision >= 3) { - dword = pci_read_config32(MCHDEV, MCHTST); - dword |= 0x02; - pci_write_config32(MCHDEV, MCHTST, dword); - - dword = pci_read_config32(D060DEV, 0xf0); - dword |= 0x18000000; - pci_write_config32(D060DEV, 0xf0, dword); - - dword = pci_read_config32(MCHDEV, MCHTST); - dword &= ~0x02; - pci_write_config32(MCHDEV, MCHTST, dword); + uint32_t dword = read32(RCOMP_MMIO + SMRCTL); + switch (cmd) { + case RCOMP_HOLD: + dword |= (1 << 9); + break; + case RCOMP_RELEASE: + dword &= ~((1 << 9) | (3 << 0)); + dword |= (1 << 10) | (1 << 0); + break; + case RCOMP_SMR_00: + dword &= ~(1 << 8); + break; + case RCOMP_SMR_01: + dword |= (1 << 10) | (1 << 8); + break; } + write32(RCOMP_MMIO + SMRCTL, dword); } /*----------------------------------------------------------------------------- @@ -1771,18 +1829,12 @@ static void ram_set_rcomp_regs(void) RAM_DEBUG_MESSAGE("Setting RCOMP registers.\n"); - /*enable access to the rcomp bar */ - dword = pci_read_config32(MCHDEV, MCHTST); - dword |= (1 << 22); - pci_write_config32(MCHDEV, MCHTST, dword); - - // Set the RCOMP MMIO base address + /* Set the RCOMP MMIO base address */ + mchtest_control(RCOMP_BAR_ENABLE); pci_write_config32(MCHDEV, SMRBASE, RCOMP_MMIO); - // Block RCOMP updates while we configure the registers - dword = read32(RCOMP_MMIO + SMRCTL); - dword |= (1 << 9); - write32(RCOMP_MMIO + SMRCTL, dword); + /* Block RCOMP updates while we configure the registers */ + rcomp_smr_control(RCOMP_HOLD); /* Begin to write the RCOMP registers */ write8(RCOMP_MMIO + 0x2c, 0x0); @@ -1859,36 +1911,23 @@ static void ram_set_rcomp_regs(void) dword &= 0x7f7fffff; write32(RCOMP_MMIO + 0x408, dword); - ram_handle_d060_1(); - - dword = pci_read_config32(MCHDEV, MCHTST); - dword &= 0x3fffffff; - pci_write_config32(MCHDEV, MCHTST, dword); + d060_control(D060_CMD_0); + mchtest_control(MCHTST_CMD_0); revision = pci_read_config8(MCHDEV, 0x08); if (revision >= 3) { - dword = read32(RCOMP_MMIO + SMRCTL); - dword &= ~0x100; - write32(RCOMP_MMIO + SMRCTL, dword); - dword = read32(RCOMP_MMIO + SMRCTL); - dword |= 0x500; - write32(RCOMP_MMIO + SMRCTL, dword); + rcomp_smr_control(RCOMP_SMR_00); + rcomp_smr_control(RCOMP_SMR_01); } - dword = read32(RCOMP_MMIO + SMRCTL); - dword &= ~0x203; - dword |= 0x401; - write32(RCOMP_MMIO + SMRCTL, dword); + rcomp_smr_control(RCOMP_RELEASE); + /* Wait 40 usec */ SLOW_DOWN_IO; - // Clear the RCOMP MMIO base address + /* Clear the RCOMP MMIO base address */ pci_write_config32(MCHDEV, SMRBASE, 0); - /*disable access to the rcomp bar */ - dword = pci_read_config32(MCHDEV, MCHTST); - dword &= ~(1 << 22); - pci_write_config32(MCHDEV, MCHTST, dword); - + mchtest_control(RCOMP_BAR_DISABLE); } /*----------------------------------------------------------------------------- @@ -2050,7 +2089,10 @@ static void sdram_set_registers(const struct mem_controller *ctrl) ram_set_rcomp_regs(); ram_set_d0f0_regs(); - ram_handle_d060_2(); + + uint8_t revision = pci_read_config8(MCHDEV, 0x08); + if (revision >= 3) + d060_control(D060_CMD_1); } /** |