summaryrefslogtreecommitdiff
path: root/src/northbridge/amd
diff options
context:
space:
mode:
Diffstat (limited to 'src/northbridge/amd')
-rw-r--r--src/northbridge/amd/agesa/family14/Makefile.inc2
-rw-r--r--src/northbridge/amd/agesa/family14/chip.h42
-rw-r--r--src/northbridge/amd/agesa/family14/dimmSpd.c145
-rw-r--r--src/northbridge/amd/agesa/family14/dimmSpd.h83
4 files changed, 272 insertions, 0 deletions
diff --git a/src/northbridge/amd/agesa/family14/Makefile.inc b/src/northbridge/amd/agesa/family14/Makefile.inc
index 87f4927441..e7093fe483 100644
--- a/src/northbridge/amd/agesa/family14/Makefile.inc
+++ b/src/northbridge/amd/agesa/family14/Makefile.inc
@@ -17,4 +17,6 @@
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
#
+romstage-y += dimmSpd.c
+
ramstage-y += northbridge.c
diff --git a/src/northbridge/amd/agesa/family14/chip.h b/src/northbridge/amd/agesa/family14/chip.h
new file mode 100644
index 0000000000..56d9c92938
--- /dev/null
+++ b/src/northbridge/amd/agesa/family14/chip.h
@@ -0,0 +1,42 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef _NB_AGESA_CHIP_H_
+#define _NB_AGESA_CHIP_H_
+
+struct northbridge_amd_agesa_family14_config
+{
+ /*
+ * Here is an example of how this would be put into the devicetree.cb file
+ * Note that only Socket 0, Channel 0 is used for the Ontario
+ * (family 14, Fam 0x00-0x0F) parts.
+ * This should be placed after the device pci 18.x statements
+ *
+ * register "spdAddrLookup" = "
+ * { // Use 8-bit SPD addresses here
+ * { {0xA0, 0xA2}, {0x00, 0x00}, }, // socket 0 - Channel 0 & 1
+ * { {0x00, 0x00}, {0x00, 0x00}, }, // socket 1 - Channel 0 & 1 (Unused)
+ * }"
+ *
+ */
+
+ u8 spdAddrLookup[2][2][4];
+};
+
+#endif
diff --git a/src/northbridge/amd/agesa/family14/dimmSpd.c b/src/northbridge/amd/agesa/family14/dimmSpd.c
new file mode 100644
index 0000000000..a3f5bb3627
--- /dev/null
+++ b/src/northbridge/amd/agesa/family14/dimmSpd.c
@@ -0,0 +1,145 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <device/pci_def.h>
+#include <device/device.h>
+#include <stdlib.h>
+#include "OEM.h" /* SMBUS0_BASE_ADDRESS */
+
+/* warning: Porting.h includes an open #pragma pack(1) */
+#include "Porting.h"
+#include "AGESA.h"
+#include "amdlib.h"
+#include "dimmSpd.h"
+#include "chip.h"
+
+/* uncomment for source level debug - GDB gets really confused otherwise. */
+//#pragma optimize ("", off)
+
+/**
+ * Read a single SPD byte. If the first byte is being read, set up the
+ * address and offset. Following bytes auto increment.
+ */
+static UINT8 readSmbusByte(UINT16 iobase, UINT8 address, char *buffer,
+ int offset, int initial_offset)
+{
+ unsigned int status = -1;
+ UINT64 time_limit;
+
+ /* clear status register */
+ __outbyte(iobase + SMBUS_STATUS_REG, 0x1E);
+
+ if (offset == initial_offset) {
+ /* Clear slave status, set offset, set slave address and start reading */
+ __outbyte(iobase + SMBUS_SLAVE_STATUS_REG, 0x3E);
+ __outbyte(iobase + SMBUS_CONTROL_REG, offset);
+ __outbyte(iobase + SMBUS_HOST_CMD_REG, address | READ_BIT);
+ __outbyte(iobase + SMBUS_COMMAND_REG, SMBUS_READ_BYTE_COMMAND);
+ } else {
+ /* Issue read command - auto increments to next byte */
+ __outbyte(iobase + SMBUS_COMMAND_REG, SMBUS_READ_COMMAND);
+ }
+ /* time limit to avoid hanging for unexpected error status */
+ time_limit = __rdtsc() + MAX_READ_TSC_COUNT;
+ while (__rdtsc() <= time_limit) {
+ status = __inbyte(iobase + SMBUS_STATUS_REG);
+ if ((status & SMBUS_INTERRUPT_MASK) == 0)
+ continue; /* SMBusInterrupt not set, keep waiting */
+ if ((status & HOSTBUSY_MASK) != 0)
+ continue; /* HostBusy set, keep waiting */
+ break;
+ }
+
+ if (status != STATUS__COMPLETED_SUCCESSFULLY)
+ return AGESA_ERROR;
+
+ buffer[0] = __inbyte(iobase + SMBUS_DATA0_REG);
+ return AGESA_SUCCESS;
+}
+
+static void writePmReg(UINT8 reg, UINT8 data)
+{
+ __outbyte(PMIO_INDEX_REG, reg);
+ __outbyte(PMIO_DATA_REG, data);
+}
+
+static void setupFch(UINT16 ioBase)
+{
+ /* set up SMBUS - Set to SMBUS 0 & set base address */
+ /* For SB800 & Hudson1 to SB900 & Hudson 2/3 */
+ writePmReg(SMBUS_BAR_HIGH_BYTE, ioBase >> 8);
+ writePmReg(SMBUS_BAR_LOW_BYTE, (ioBase & 0xe0) | 1);
+
+ /* set SMBus clock to 400 KHz */
+ __outbyte(ioBase + SMBUS_CLOCK_REG, SMBUS_FREQUENCY_CONST / 400000);
+}
+
+/**
+ * Read one or more SPD bytes from a DIMM.
+ * Start with offset zero and read sequentially.
+ * Reads 128 bytes in 7-8 ms at 400 KHz.
+ */
+static UINT8 readspd(UINT16 iobase, UINT8 SmbusSlaveAddress, char *buffer,
+ UINT16 count)
+{
+ UINT16 index;
+ UINT8 status;
+ UINT8 initial_offset = 0;
+
+ setupFch(iobase);
+
+ for (index = initial_offset; index < count; index++) {
+ status = readSmbusByte(iobase, SmbusSlaveAddress, &buffer[index], index,
+ initial_offset);
+ if (status != AGESA_SUCCESS)
+ return status;
+ }
+
+ return status;
+}
+
+/**
+ * Gets the SMBUS address for an SPD from the array in devicetree.cb
+ * then read the SPD into the supplied buffer.
+ */
+AGESA_STATUS agesa_ReadSPD(UINT32 unused1, UINT32 unused2, void *infoptr)
+{
+ UINT8 spdAddress;
+ AGESA_READ_SPD_PARAMS *info = infoptr;
+ ROMSTAGE_CONST struct device *dev = dev_find_slot(0, PCI_DEVFN(0x18, 2));
+ ROMSTAGE_CONST struct northbridge_amd_agesa_family14_config *config = NULL;
+
+ if ((dev == 0) || (dev->chip_info == 0))
+ return AGESA_ERROR;
+
+ config = dev->chip_info;
+ if (info->SocketId >= ARRAY_SIZE(config->spdAddrLookup))
+ return AGESA_ERROR;
+ if (info->MemChannelId >= ARRAY_SIZE(config->spdAddrLookup[0]))
+ return AGESA_ERROR;
+ if (info->DimmId >= ARRAY_SIZE(config->spdAddrLookup[0][0]))
+ return AGESA_ERROR;
+
+ spdAddress = config->spdAddrLookup
+ [info->SocketId][info->MemChannelId][info->DimmId];
+
+ if (spdAddress == 0)
+ return AGESA_ERROR;
+ return readspd(SMBUS0_BASE_ADDRESS, spdAddress, (void *)info->Buffer, 128);
+}
diff --git a/src/northbridge/amd/agesa/family14/dimmSpd.h b/src/northbridge/amd/agesa/family14/dimmSpd.h
new file mode 100644
index 0000000000..57512c72bb
--- /dev/null
+++ b/src/northbridge/amd/agesa/family14/dimmSpd.h
@@ -0,0 +1,83 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA02110-1301 USA
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+
+#ifndef _DIMMSPD_H_
+#define _DIMMSPD_H_
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+#define READ_BIT 0x01
+
+#define SMBUS_INTERRUPT_MASK 0x02
+#define HOSTBUSY_MASK 0x01
+
+#define SMBUS_READ_BYTE_COMMAND 0x48
+#define SMBUS_READ_COMMAND 0x44
+
+#define MAX_READ_TSC_COUNT (2000000000 / 10)
+
+#define PMIO_INDEX_REG 0xCD6
+#define PMIO_DATA_REG 0xCD7
+
+#define SMBUS_BAR_LOW_BYTE 0x2C
+#define SMBUS_BAR_HIGH_BYTE 0x2D
+
+#define SMBUS_STATUS_REG 0x00
+#define SMBUS_SLAVE_STATUS_REG 0x01
+#define SMBUS_COMMAND_REG 0x02
+#define SMBUS_CONTROL_REG 0x03
+#define SMBUS_HOST_CMD_REG 0x04
+#define SMBUS_DATA0_REG 0x05
+#define SMBUS_CLOCK_REG 0x0E
+
+#define STATUS__COMPLETED_SUCCESSFULLY 0x02
+
+#define SMBUS_FREQUENCY_CONST 66000000 / 4
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+AGESA_STATUS
+agesa_ReadSPD (IN UINT32 Func, IN UINT32 Data, IN OUT void *SpdData);
+
+/*---------------------------------------------------------------------------------------
+ * L O C A L F U N C T I O N S
+ *---------------------------------------------------------------------------------------
+ */
+
+#endif
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 17:46:57 +0000