diff options
Diffstat (limited to 'src/northbridge/amd/gx2/raminit.c')
| -rw-r--r-- | src/northbridge/amd/gx2/raminit.c | 12 |
1 files changed, 6 insertions, 6 deletions
diff --git a/src/northbridge/amd/gx2/raminit.c b/src/northbridge/amd/gx2/raminit.c index db10138b34..6e66d7dcf5 100644 --- a/src/northbridge/amd/gx2/raminit.c +++ b/src/northbridge/amd/gx2/raminit.c @@ -97,7 +97,7 @@ static void auto_size_dimm(unsigned int dimm) dimm_size <<= (dimm_setting >> CF07_UPPER_D0_MB_SHIFT) & 1; /* shift to multiply by # DIMM banks */ printk(BIOS_DEBUG, "BEFORT CTZ\n"); dimm_size = __builtin_ctz(dimm_size); - printk(BIOS_DEBUG, "TEST DIMM SIZE>7\n"); + printk(BIOS_DEBUG, "TEST DIMM SIZE > 7\n"); if (dimm_size > 7) { /* 7 is 512MB only support 512MB per DIMM */ printk(BIOS_EMERG, "Only support up to 512MB per DIMM\n"); post_code(ERROR_DENSITY_DIMM); @@ -130,7 +130,7 @@ static void auto_size_dimm(unsigned int dimm) * Remember that pa[2:0] are zeroed out since it's a 64-bit data bus (8 bytes), * so lower 3 address bits are dont_cares. So from the table above, * it's easier to see what the old code is doing: if for example, - * #col_addr_bits=7(06h), it adds 3 to get 10, then does 2^10=1K. + * #col_addr_bits = 7(06h), it adds 3 to get 10, then does 2^10 = 1K. */ spd_byte = NumColAddr[spd_read_byte(dimm, SPD_NUM_COLUMNS) & 0xF]; @@ -142,10 +142,10 @@ static void auto_size_dimm(unsigned int dimm) } printk(BIOS_DEBUG, ">11address test\n"); spd_byte -= 7; - if (spd_byte > 4) { /* if the value is above 4 it means >11 col address lines */ - spd_byte = 7; /* which means >16k so set to disabled */ + if (spd_byte > 4) { /* if the value is above 4 it means > 11 col address lines */ + spd_byte = 7; /* which means > 16k so set to disabled */ } - dimm_setting |= spd_byte << CF07_UPPER_D0_PSZ_SHIFT; /* 0=1k,1=2k,2=4k,etc */ + dimm_setting |= spd_byte << CF07_UPPER_D0_PSZ_SHIFT; /* 0 = 1k, 1 = 2k, 2 = 4k, etc */ printk(BIOS_DEBUG, "RDMSR CF07\n"); msr = rdmsr(MC_CF07_DATA); @@ -230,7 +230,7 @@ const uint8_t CASDDR[] = { 5, 5, 2, 6, 0 }; /* 1(1.5), 1.5, 2, 2.5, 0 */ static u8 getcasmap(u32 dimm, u16 glspeed) { u16 dimm_speed; - u8 spd_byte, casmap, casmap_shift=0; + u8 spd_byte, casmap, casmap_shift = 0; /************************** DIMM0 **********************************/ casmap = spd_read_byte(dimm, SPD_ACCEPTABLE_CAS_LATENCIES); |