diff options
Diffstat (limited to 'src/northbridge/amd/amdmct/mct/mct_d.h')
| -rw-r--r-- | src/northbridge/amd/amdmct/mct/mct_d.h | 804 |
1 files changed, 0 insertions, 804 deletions
diff --git a/src/northbridge/amd/amdmct/mct/mct_d.h b/src/northbridge/amd/amdmct/mct/mct_d.h deleted file mode 100644 index b985137987..0000000000 --- a/src/northbridge/amd/amdmct/mct/mct_d.h +++ /dev/null @@ -1,804 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2015-2017 Timothy Pearson <tpearson@raptorengineeringinc.com>, Raptor Engineering - * Copyright (C) 2007-2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* - * Description: Include file for all generic DDR 2 MCT files. - */ -#ifndef MCT_D_H -#define MCT_D_H - -#define DQS_TRAIN_DEBUG 0 - -#include <stdint.h> -#include <northbridge/amd/amdfam10/debug.h> -#include <northbridge/amd/amdfam10/raminit.h> - -#include "mct_d_gcc.h" - -extern const u8 Table_DQSRcvEn_Offset[]; -extern const u32 TestPattern0_D[]; -extern const u32 TestPattern1_D[]; -extern const u32 TestPattern2_D[]; - -/*=========================================================================== - CPU - K8/FAM10 -===========================================================================*/ -#define PT_L1 0 /* CPU Package Type */ -#define PT_M2 1 -#define PT_S1 2 -#define PT_GR 3 - -#define J_MIN 0 /* j loop constraint. 1 = CL 2.0 T*/ -#define J_MAX 5 /* j loop constraint. 5 = CL 7.0 T*/ -#define K_MIN 1 /* k loop constraint. 1 = 200 MHz*/ -#define K_MAX 5 /* k loop constraint. 5 = 533 MHz*/ -#define CL_DEF 2 /* Default value for failsafe operation. 2 = CL 4.0 T*/ -#define T_DEF 1 /* Default value for failsafe operation. 1 = 5ns (cycle time)*/ - -#define BSCRate 1 /* reg bit field = rate of dram scrubber for ecc*/ - /* memory initialization (ecc and check-bits).*/ - /* 1 = 40 ns/64 bytes.*/ -#define FirstPass 1 /* First pass through RcvEn training*/ -#define SecondPass 2 /* Second pass through Rcven training*/ - -#define RCVREN_MARGIN 6 /* number of DLL taps to delay beyond first passing position*/ -#define MAXASYNCLATCTL_2 2 /* Max Async Latency Control value*/ -#define MAXASYNCLATCTL_3 3 /* Max Async Latency Control value*/ - -#define DQS_FAIL 1 -#define DQS_PASS 0 -#define DQS_WRITEDIR 1 -#define DQS_READDIR 0 -#define MIN_DQS_WNDW 3 -#define secPassOffset 6 -#define Pass1MemClkDly 0x20 /* Add 1/2 Memlock delay */ -#define MAX_RD_LAT 0x3FF -#define MIN_FENCE 14 -#define MAX_FENCE 20 -#define MIN_DQS_WR_FENCE 14 -#define MAX_DQS_WR_FENCE 20 -#define FenceTrnFinDlySeed 19 -#define EarlyArbEn 19 - -#define PA_HOST(Node) ((((0x18+Node) << 3)+0) << 12) /* Node 0 Host Bus function PCI Address bits [15:0]*/ -#define PA_MAP(Node) ((((0x18+Node) << 3)+1) << 12) /* Node 0 MAP function PCI Address bits [15:0]*/ -#define PA_DCT(Node) ((((0x18+Node) << 3)+2) << 12) /* Node 0 DCT function PCI Address bits [15:0]*/ -//#define PA_EXT_DCT (((00 << 3)+4) << 8) /*Node 0 DCT extended configuration registers*/ -//#define PA_DCTADDL (((00 << 3)+2) << 8) /*Node x DCT function, Additional Registers PCI Address bits [15:0]*/ -//#define PA_EXT_DCTADDL (((00 << 3)+5) << 8) /*Node x DCT function, Additional Registers PCI Address bits [15:0]*/ - -#define PA_NBMISC(Node) ((((0x18+Node) << 3)+3) << 12) /*Node 0 Misc PCI Address bits [15:0]*/ -//#define PA_NBDEVOP (((00 << 3)+3) << 8) /*Node 0 Misc PCI Address bits [15:0]*/ - -#define DCC_EN 1 /* X:2:0x94[19]*/ -#define ILD_Lmt 3 /* X:2:0x94[18:16]*/ - -#define EncodedTSPD 0x00191709 /* encodes which SPD byte to get T from*/ - /* versus CL X, CL X-.5, and CL X-1*/ - -#define Bias_TrpT 3 /* bias to convert bus clocks to bit field value*/ -#define Bias_TrrdT 2 -#define Bias_TrcdT 3 -#define Bias_TrasT 3 -#define Bias_TrcT 11 -#define Bias_TrtpT 2 -#define Bias_TwrT 3 -#define Bias_TwtrT 0 -#define Bias_TfawT 7 - -#define Min_TrpT 3 /* min programmable value in busclocks*/ -#define Max_TrpT 6 /* max programmable value in busclocks*/ -#define Min_TrrdT 2 -#define Max_TrrdT 5 -#define Min_TrcdT 3 -#define Max_TrcdT 6 -#define Min_TrasT 5 -#define Max_TrasT 18 -#define Min_TrcT 11 -#define Max_TrcT 26 -#define Min_TrtpT 2 -#define Max_TrtpT 3 -#define Min_TwrT 3 -#define Max_TwrT 6 -#define Min_TwtrT 1 -#define Max_TwtrT 3 - -/*DDR2-1066 support*/ -#define Bias_TrcdT_1066 5 -#define Bias_TrasT_1066 15 -#define Bias_TrrdT_1066 4 -#define Bias_TwrT_1066 4 -#define Bias_TrpT_1066 5 -#define Bias_TwtrT_1066 4 -#define Bias_TfawT_1066 15 - -#define Min_TrcdT_1066 5 -#define Max_TrcdT_1066 12 -#define Min_TrasT_1066 15 -#define Max_TrasT_1066 30 -#define Min_TrcT_1066 11 -#define Max_TrcT_1066 42 -#define Min_TrrdT_1066 4 -#define Max_TrrdT_1066 7 -#define Min_TwrT_1066 5 -#define Max_TwrT_1066 8 -#define Min_TrpT_1066 5 -#define Max_TrpT_1066 12 -#define Min_TwtrT_1066 4 -#define Max_TwtrT_1066 7 - -/*common register bit names*/ -#define DramHoleValid 0 /* func 1, offset F0h, bit 0*/ -#define DramMemHoistValid 1 /* func 1, offset F0h, bit 1*/ -#define CSEnable 0 /* func 2, offset 40h-5C, bit 0*/ -#define Spare 1 /* func 2, offset 40h-5C, bit 1*/ -#define TestFail 2 /* func 2, offset 40h-5C, bit 2*/ -#define DqsRcvEnTrain 18 /* func 2, offset 78h, bit 18*/ -#define EnDramInit 31 /* func 2, offset 7Ch, bit 31*/ -#define DisAutoRefresh 18 /* func 2, offset 8Ch, bit 18*/ -#define InitDram 0 /* func 2, offset 90h, bit 0*/ -#define BurstLength32 10 /* func 2, offset 90h, bit 10*/ -#define Width128 11 /* func 2, offset 90h, bit 11*/ -#define X4Dimm 12 /* func 2, offset 90h, bit 12*/ -#define UnBuffDimm 16 /* func 2, offset 90h, bit 16*/ -#define DimmEcEn 19 /* func 2, offset 90h, bit 19*/ -#define MemClkFreqVal 3 /* func 2, offset 94h, bit 3*/ -#define RDqsEn 12 /* func 2, offset 94h, bit 12*/ -#define DisDramInterface 14 /* func 2, offset 94h, bit 14*/ -#define DctAccessWrite 30 /* func 2, offset 98h, bit 30*/ -#define DctAccessDone 31 /* func 2, offset 98h, bit 31*/ -#define MemClrStatus 0 /* func 2, offset A0h, bit 0*/ -#define PwrSavingsEn 10 /* func 2, offset A0h, bit 10*/ -#define Mod64BitMux 4 /* func 2, offset A0h, bit 4*/ -#define DisableJitter 1 /* func 2, offset A0h, bit 1*/ -#define MemClrDis 1 /* func 3, offset F8h, FNC 4, bit 1*/ -#define SyncOnUcEccEn 2 /* func 3, offset 44h, bit 2*/ -#define Dr_MemClrStatus 10 /* func 3, offset 110h, bit 10*/ -#define MemClrBusy 9 /* func 3, offset 110h, bit 9*/ -#define DctGangEn 4 /* func 3, offset 110h, bit 4*/ -#define MemClrInit 3 /* func 3, offset 110h, bit 3*/ -#define AssertCke 28 /* func 2, offset 7Ch, bit 28*/ -#define DeassertMemRstX 27 /* func 2, offset 7Ch, bit 27*/ -#define SendMrsCmd 26 /* func 2, offset 7Ch, bit 26*/ -#define SendAutoRefresh 25 /* func 2, offset 7Ch, bit 25*/ -#define SendPchgAll 24 /* func 2, offset 7Ch, bit 24*/ -#define DisDqsBar 6 /* func 2, offset 90h, bit 6*/ -#define DramEnabled 8 /* func 2, offset 110h, bit 8*/ -#define LegacyBiosMode 9 /* func 2, offset 94h, bit 9*/ -#define PrefDramTrainMode 28 /* func 2, offset 11Ch, bit 28*/ -#define FlushWr 30 /* func 2, offset 11Ch, bit 30*/ -#define DisAutoComp 30 /* func 2, offset 9Ch, Index 8, bit 30*/ -#define DqsRcvTrEn 13 /* func 2, offset 9Ch, Index 8, bit 13*/ -#define ForceAutoPchg 23 /* func 2, offset 90h, bit 23*/ -#define ClLinesToNbDis 15 /* Bu_CFG2, bit 15*/ -#define WbEnhWsbDis_D (48-32) -#define PhyFenceTrEn 3 /* func 2, offset 9Ch, Index 8, bit 3 */ -#define ParEn 8 /* func 2, offset 90h, bit 8 */ -#define DcqArbBypassEn 19 /* func 2, offset 94h, bit 19 */ -#define ActiveCmdAtRst 1 /* func 2, offset A8H, bit 1 */ -#define FlushWrOnStpGnt 29 /* func 2, offset 11Ch, bit 29 */ -#define BankSwizzleMode 22 /* func 2, offset 94h, bit 22 */ -#define ChSetupSync 15 /* func 2, offset 78h, bit 15 */ - - - -/*============================================================================= - SW Initialization -============================================================================*/ -#define DLL_Enable 1 -#define OCD_Default 2 -#define OCD_Exit 3 - - - -/*============================================================================= - Jedec DDR II -=============================================================================*/ -#define SPD_TYPE 2 /*SPD byte read location*/ - #define JED_DDRSDRAM 0x07 /*Jedec defined bit field*/ - #define JED_DDR2SDRAM 0x08 /*Jedec defined bit field*/ - -#define SPD_DIMMTYPE 20 -#define SPD_ATTRIB 21 - #define JED_DIFCKMSK 0x20 /*Differential Clock Input*/ - #define JED_REGADCMSK 0x11 /*Registered Address/Control*/ - #define JED_PROBEMSK 0x40 /*Analysis Probe installed*/ -#define SPD_DEVATTRIB 22 -#define SPD_EDCTYPE 11 - #define JED_ECC 0x02 - #define JED_ADRCPAR 0x04 -#define SPD_ROWSZ 3 -#define SPD_COLSZ 4 -#define SPD_LBANKS 17 /*number of [logical] banks on each device*/ -#define SPD_DMBANKS 5 /*number of physical banks on dimm*/ - #define SPDPLBit 4 /* Dram package bit*/ -#define SPD_BANKSZ 31 /*capacity of physical bank*/ -#define SPD_DEVWIDTH 13 -#define SPD_CASLAT 18 -#define SPD_TRP 27 -#define SPD_TRRD 28 -#define SPD_TRCD 29 -#define SPD_TRAS 30 -#define SPD_TWR 36 -#define SPD_TWTR 37 -#define SPD_TRTP 38 -#define SPD_TRCRFC 40 -#define SPD_TRC 41 -#define SPD_TRFC 42 - -#define SPD_MANID_START 64 -#define SPD_PARTN_START 73 -#define SPD_PARTN_LENGTH 18 -#define SPD_REVNO_START 91 - -#define SPD_MANDATEYR 93 /*Module Manufacturing Year (BCD)*/ - -#define SPD_MANDATEWK 94 /*Module Manufacturing Week (BCD)*/ - -#define SPD_SERIAL_START 95 - -/*----------------------------- - Jedec DDR II related equates ------------------------------*/ -#define MYEAR06 6 /* Manufacturing Year BCD encoding of 2006 - 06d*/ -#define MWEEK24 0x24 /* Manufacturing Week BCD encoding of June - 24d*/ - -/*============================================================================= - Macros -=============================================================================*/ - -#define _2GB_RJ8 (2<<(30-8)) -#define _4GB_RJ8 (4<<(30-8)) -#define _4GB_RJ4 (4<<(30-4)) - -#define BigPagex8_RJ8 (1<<(17+3-8)) /*128KB * 8 >> 8 */ - -/*============================================================================= - Global MCT Status Structure -=============================================================================*/ -struct MCTStatStruc { - u32 GStatus; /* Global Status bitfield*/ - u32 HoleBase; /* If not zero, BASE[39:8] (system address) - of sub 4GB dram hole for HW remapping.*/ - u32 Sub4GCacheTop; /* If not zero, the 32-bit top of cacheable memory.*/ - u32 SysLimit; /* LIMIT[39:8] (system address)*/ -} __packed; - -/*============================================================================= - Global MCT Configuration Status Word (GStatus) -=============================================================================*/ -/*These should begin at bit 0 of GStatus[31:0]*/ -#define GSB_MTRRshort 0 /* Ran out of MTRRs while mapping memory*/ -#define GSB_ECCDIMMs 1 /* All banks of all Nodes are ECC capable*/ -#define GSB_DramECCDis 2 /* Dram ECC requested but not enabled.*/ -#define GSB_SoftHole 3 /* A Node Base gap was created*/ -#define GSB_HWHole 4 /* A HW dram remap was created*/ -#define GSB_NodeIntlv 5 /* Node Memory interleaving was enabled*/ -#define GSB_SpIntRemapHole 16 /* Special condition for Node Interleave and HW remapping*/ -#define GSB_EnDIMMSpareNW 17 /* Indicates that DIMM Spare can be used without a warm reset */ - /* NOTE: This is a local bit used by memory code */ - - -/*=============================================================================== - Local DCT Status structure (a structure for each DCT) -===============================================================================*/ - -struct DCTPersistentStatStruc { - u8 CH_D_DIR_B_DQS[2][4][2][9]; /* [A/B] [DIMM1-4] [R/W] [DQS] */ - /* CHA DIMM0 Byte 0 - 7 and Check Write DQS Delay*/ - /* CHA DIMM0 Byte 0 - 7 and Check Read DQS Delay*/ - /* CHA DIMM1 Byte 0 - 7 and Check Write DQS Delay*/ - /* CHA DIMM1 Byte 0 - 7 and Check Read DQS Delay*/ - /* CHB DIMM0 Byte 0 - 7 and Check Write DQS Delay*/ - /* CHB DIMM0 Byte 0 - 7 and Check Read DQS Delay*/ - /* CHB DIMM1 Byte 0 - 7 and Check Write DQS Delay*/ - /* CHB DIMM1 Byte 0 - 7 and Check Read DQS Delay*/ - u8 CH_D_B_RCVRDLY[2][4][8]; /* [A/B] [DIMM0-3] [DQS] */ - /* CHA DIMM 0 Receiver Enable Delay*/ - /* CHA DIMM 1 Receiver Enable Delay*/ - /* CHA DIMM 2 Receiver Enable Delay*/ - /* CHA DIMM 3 Receiver Enable Delay*/ - - /* CHB DIMM 0 Receiver Enable Delay*/ - /* CHB DIMM 1 Receiver Enable Delay*/ - /* CHB DIMM 2 Receiver Enable Delay*/ - /* CHB DIMM 3 Receiver Enable Delay*/ - u8 CH_D_BC_RCVRDLY[2][4]; - /* CHA DIMM 0 - 4 Check Byte Receiver Enable Delay*/ - /* CHB DIMM 0 - 4 Check Byte Receiver Enable Delay*/ - u16 HostBiosSrvc1; /* Word sized general purpose field for use by host BIOS. Scratch space.*/ - u32 HostBiosSrvc2; /* Dword sized general purpose field for use by host BIOS. Scratch space.*/ -} __packed; - - -struct DCTStatStruc { /* A per Node structure*/ -/* DCTStatStruct_F - start */ - u8 Node_ID; /* Node ID of current controller*/ - uint8_t Internal_Node_ID; /* Internal Node ID of the current controller */ - uint8_t Dual_Node_Package; /* 1 = Dual node package (G34) */ - uint8_t stopDCT; /* Set if the DCT will be stopped */ - u8 ErrCode; /* Current error condition of Node - 0= no error - 1= Variance Error, DCT is running but not in an optimal configuration. - 2= Stop Error, DCT is NOT running - 3= Fatal Error, DCT/MCT initialization has been halted.*/ - u32 ErrStatus; /* Error Status bit Field */ - u32 Status; /* Status bit Field*/ - u8 DIMMAddr[8]; /* SPD address of DIMM controlled by MA0_CS_L[0,1]*/ - /* SPD address of..MB0_CS_L[0,1]*/ - /* SPD address of..MA1_CS_L[0,1]*/ - /* SPD address of..MB1_CS_L[0,1]*/ - /* SPD address of..MA2_CS_L[0,1]*/ - /* SPD address of..MB2_CS_L[0,1]*/ - /* SPD address of..MA3_CS_L[0,1]*/ - /* SPD address of..MB3_CS_L[0,1]*/ - u16 DIMMPresent; /*For each bit n 0..7, 1 = DIMM n is present. - DIMM# Select Signal - 0 MA0_CS_L[0,1] - 1 MB0_CS_L[0,1] - 2 MA1_CS_L[0,1] - 3 MB1_CS_L[0,1] - 4 MA2_CS_L[0,1] - 5 MB2_CS_L[0,1] - 6 MA3_CS_L[0,1] - 7 MB3_CS_L[0,1]*/ - u16 DIMMValid; /* For each bit n 0..7, 1 = DIMM n is valid and is/will be configured*/ - u16 DIMMMismatch; /* For each bit n 0..7, 1 = DIMM n is mismatched, channel B is always considered the mismatch */ - u16 DIMMSPDCSE; /* For each bit n 0..7, 1 = DIMM n SPD checksum error*/ - u16 DimmECCPresent; /* For each bit n 0..7, 1 = DIMM n is ECC capable.*/ - u16 DimmPARPresent; /* For each bit n 0..7, 1 = DIMM n is ADR/CMD Parity capable.*/ - u16 Dimmx4Present; /* For each bit n 0..7, 1 = DIMM n contains x4 data devices.*/ - u16 Dimmx8Present; /* For each bit n 0..7, 1 = DIMM n contains x8 data devices.*/ - u16 Dimmx16Present; /* For each bit n 0..7, 1 = DIMM n contains x16 data devices.*/ - u16 DIMM2Kpage; /* For each bit n 0..7, 1 = DIMM n contains 1K page devices.*/ - u8 MAload[2]; /* Number of devices loading MAA bus*/ - /* Number of devices loading MAB bus*/ - u8 MAdimms[2]; /*Number of DIMMs loading CH A*/ - /* Number of DIMMs loading CH B*/ - u8 DATAload[2]; /*Number of ranks loading CH A DATA*/ - /* Number of ranks loading CH B DATA*/ - u8 DIMMAutoSpeed; /*Max valid Mfg. Speed of DIMMs - 1 = 200MHz - 2 = 266MHz - 3 = 333MHz - 4 = 400MHz - 5 = 533MHz*/ - u8 DIMMCASL; /* Min valid Mfg. CL bitfield - 0 = 2.0 - 1 = 3.0 - 2 = 4.0 - 3 = 5.0 - 4 = 6.0 */ - u16 DIMMTrcd; /* Minimax Trcd*40 (ns) of DIMMs*/ - u16 DIMMTrp; /* Minimax Trp*40 (ns) of DIMMs*/ - u16 DIMMTrtp; /* Minimax Trtp*40 (ns) of DIMMs*/ - u16 DIMMTras; /* Minimax Tras*40 (ns) of DIMMs*/ - u16 DIMMTrc; /* Minimax Trc*40 (ns) of DIMMs*/ - u16 DIMMTwr; /* Minimax Twr*40 (ns) of DIMMs*/ - u16 DIMMTrrd; /* Minimax Trrd*40 (ns) of DIMMs*/ - u16 DIMMTwtr; /* Minimax Twtr*40 (ns) of DIMMs*/ - u8 Speed; /* Bus Speed (to set Controller) - 1 = 200MHz - 2 = 266MHz - 3 = 333MHz - 4 = 400MHz */ - u8 CASL; /* CAS latency DCT setting - 0 = 2.0 - 1 = 3.0 - 2 = 4.0 - 3 = 5.0 - 4 = 6.0 */ - u8 Trcd; /* DCT Trcd (busclocks) */ - u8 Trp; /* DCT Trp (busclocks) */ - u8 Trtp; /* DCT Trtp (busclocks) */ - u8 Tras; /* DCT Tras (busclocks) */ - u8 Trc; /* DCT Trc (busclocks) */ - u8 Twr; /* DCT Twr (busclocks) */ - u8 Trrd; /* DCT Trrd (busclocks) */ - u8 Twtr; /* DCT Twtr (busclocks) */ - u8 Trfc[4]; /* DCT Logical DIMM0 Trfc - 0 = 75ns (for 256Mb devs) - 1 = 105ns (for 512Mb devs) - 2 = 127.5ns (for 1Gb devs) - 3 = 195ns (for 2Gb devs) - 4 = 327.5ns (for 4Gb devs) */ - /* DCT Logical DIMM1 Trfc (see Trfc0 for format) */ - /* DCT Logical DIMM2 Trfc (see Trfc0 for format) */ - /* DCT Logical DIMM3 Trfc (see Trfc0 for format) */ - u16 CSPresent; /* For each bit n 0..7, 1 = Chip-select n is present */ - u16 CSTestFail; /* For each bit n 0..7, 1 = Chip-select n is present but disabled */ - u32 DCTSysBase; /* BASE[39:8] (system address) of this Node's DCTs. */ - u32 DCTHoleBase; /* If not zero, BASE[39:8] (system address) of dram hole for HW remapping. Dram hole exists on this Node's DCTs. */ - u32 DCTSysLimit; /* LIMIT[39:8] (system address) of this Node's DCTs */ - u16 PresetmaxFreq; /* Maximum OEM defined DDR frequency - 200 = 200MHz (DDR400) - 266 = 266MHz (DDR533) - 333 = 333MHz (DDR667) - 400 = 400MHz (DDR800) */ - u8 _2Tmode; /* 1T or 2T CMD mode (slow access mode) - 1 = 1T - 2 = 2T */ - u8 TrwtTO; /* DCT TrwtTO (busclocks)*/ - u8 Twrrd; /* DCT Twrrd (busclocks)*/ - u8 Twrwr; /* DCT Twrwr (busclocks)*/ - u8 Trdrd; /* DCT Trdrd (busclocks)*/ - u32 CH_ODC_CTL[2]; /* Output Driver Strength (see BKDG FN2:Offset 9Ch, index 00h*/ - u32 CH_ADDR_TMG[2]; /* Address Bus Timing (see BKDG FN2:Offset 9Ch, index 04h*/ - /* Output Driver Strength (see BKDG FN2:Offset 9Ch, index 20h*/ - /* Address Bus Timing (see BKDG FN2:Offset 9Ch, index 24h*/ - u16 CH_EccDQSLike[2]; /* CHA DQS ECC byte like...*/ - u8 CH_EccDQSScale[2]; /* CHA DQS ECC byte scale*/ - /* CHA DQS ECC byte like...*/ - /* CHA DQS ECC byte scale*/ - u8 MaxAsyncLat; /* Max Asynchronous Latency (ns)*/ - // NOTE: Not used in Barcelona - u8 CH_D_RCVRDLY[2][4]; - /* CHA DIMM 0 - 4 Receiver Enable Delay*/ - /* CHB DIMM 0 - 4 Receiver Enable Delay */ - // NOTE: Not used in Barcelona - u8 CH_D_B_DQS[2][2][8]; - /* CHA Byte 0-7 Write DQS Delay */ - /* CHA Byte 0-7 Read DQS Delay */ - /* CHB Byte 0-7 Write DQS Delay */ - /* CHB Byte 0-7 Read DQS Delay */ - u32 PtrPatternBufA; /* Ptr on stack to aligned DQS testing pattern*/ - u32 PtrPatternBufB; /* Ptr on stack to aligned DQS testing pattern*/ - u8 Channel; /* Current Channel (0= CH A, 1 = CH B)*/ - u8 ByteLane; /* Current Byte Lane (0..7)*/ - u8 Direction; /* Current DQS-DQ training write direction (0 = read, 1 = write)*/ - u8 Pattern; /* Current pattern*/ - u8 DQSDelay; /* Current DQS delay value*/ - u32 TrainErrors; /* Current Training Errors*/ - - u32 AMC_TSC_DeltaLo; /* Time Stamp Counter measurement of AMC, Low dword*/ - u32 AMC_TSC_DeltaHi; /* Time Stamp Counter measurement of AMC, High dword*/ - // NOTE: Not used in Barcelona - u8 CH_D_DIR_MaxMin_B_Dly[2][4][2][2][8]; - /* CH A byte lane 0 - 7 minimum filtered window passing DQS delay value*/ - /* CH A byte lane 0 - 7 maximum filtered window passing DQS delay value*/ - /* CH B byte lane 0 - 7 minimum filtered window passing DQS delay value*/ - /* CH B byte lane 0 - 7 maximum filtered window passing DQS delay value*/ - /* CH A byte lane 0 - 7 minimum filtered window passing DQS delay value*/ - /* CH A byte lane 0 - 7 maximum filtered window passing DQS delay value*/ - /* CH B byte lane 0 - 7 minimum filtered window passing DQS delay value*/ - /* CH B byte lane 0 - 7 maximum filtered window passing DQS delay value*/ - uint64_t LogicalCPUID; /* The logical CPUID of the node*/ - u16 DimmQRPresent; /* QuadRank DIMM present?*/ - u16 DimmTrainFail; /* Bitmap showing which dimms failed training*/ - u16 CSTrainFail; /* Bitmap showing which chipselects failed training*/ - u16 DimmYr06; /* Bitmap indicating which Dimms have a manufactur's year code <= 2006*/ - u16 DimmWk2406; /* Bitmap indicating which Dimms have a manufactur's week code <= 24 of 2006 (June)*/ - u16 DimmDRPresent; /* Bitmap indicating that Dual Rank Dimms are present*/ - u16 DimmPlPresent; /* Bitmap indicating that Planar (1) or Stacked (0) Dimms are present.*/ - u16 ChannelTrainFai; /* Bitmap showing the channel information about failed Chip Selects - 0 in any bit field indicates Channel 0 - 1 in any bit field indicates Channel 1 */ - u16 CSUsrTestFail; /* Chip selects excluded by user */ -/* DCTStatStruct_F - end */ - - u16 CH_MaxRdLat[2]; /* Max Read Latency (ns) for DCT 0*/ - /* Max Read Latency (ns) for DCT 1*/ - u8 DIMMValidDCT[2]; /* DIMM# in DCT0*/ - /* DIMM# in DCT1*/ - u8 MaxDCTs; /* Max number of DCTs in system*/ - // NOTE: removed u8 DCT. Use ->dev_ for pci R/W; /*DCT pointer*/ - u8 GangedMode; /* Ganged mode enabled, 0 = disabled, 1 = enabled*/ - u8 DRPresent; /* Family 10 present flag, 0 = not Fam10, 1 = Fam10*/ - u32 NodeSysLimit; /* BASE[39:8],for DCT0+DCT1 system address*/ - u8 WrDatGrossH; - u8 DqsRcvEnGrossL; - // NOTE: Not used - u8 NodeSpeed /* Bus Speed (to set Controller) - /* 1 = 200MHz */ - /* 2 = 266MHz */ - /* 3 = 333MHz */ - // NOTE: Not used - u8 NodeCASL /* CAS latency DCT setting - /* 0 = 2.0 */ - /* 1 = 3.0 */ - /* 2 = 4.0 */ - /* 3 = 5.0 */ - /* 4 = 6.0 */ - u8 TrwtWB; - u8 CurrRcvrCHADelay; /* for keep current RcvrEnDly of chA*/ - u16 T1000; /* get the T1000 figure (cycle time (ns)*1K)*/ - u8 DqsRcvEn_Pass; /* for TrainRcvrEn byte lane pass flag*/ - u8 DqsRcvEn_Saved; /* for TrainRcvrEn byte lane saved flag*/ - u8 SeedPass1Remainder; /* for Phy assisted DQS receiver enable training*/ - - /* for second pass - Second pass should never run for Fam10*/ - // NOTE: Not used for Barcelona - u8 CH_D_B_RCVRDLY_1[2][4][8]; /* CHA DIMM 0 Receiver Enable Delay*/ - /* CHA DIMM 1 Receiver Enable Delay*/ - /* CHA DIMM 2 Receiver Enable Delay*/ - /* CHA DIMM 3 Receiver Enable Delay*/ - - /* CHB DIMM 0 Receiver Enable Delay*/ - /* CHB DIMM 1 Receiver Enable Delay*/ - /* CHB DIMM 2 Receiver Enable Delay*/ - /* CHB DIMM 3 Receiver Enable Delay*/ - - u8 ClToNB_flag; /* is used to restore ClLinesToNbDis bit after memory */ - u32 NodeSysBase; /* for channel interleave usage */ - -/* New for LB Support */ - u8 NodePresent; - u32 dev_host; - u32 dev_map; - u32 dev_dct; - u32 dev_nbmisc; - - uint8_t DimmRows[MAX_DIMMS_SUPPORTED]; - uint8_t DimmCols[MAX_DIMMS_SUPPORTED]; - uint8_t DimmRanks[MAX_DIMMS_SUPPORTED]; - uint8_t DimmBanks[MAX_DIMMS_SUPPORTED]; - uint8_t DimmWidth[MAX_DIMMS_SUPPORTED]; - uint8_t DimmRegistered[MAX_DIMMS_SUPPORTED]; - - uint64_t DimmManufacturerID[MAX_DIMMS_SUPPORTED]; - char DimmPartNumber[MAX_DIMMS_SUPPORTED][SPD_PARTN_LENGTH+1]; - uint16_t DimmRevisionNumber[MAX_DIMMS_SUPPORTED]; - uint32_t DimmSerialNumber[MAX_DIMMS_SUPPORTED]; - - /* NOTE: This must remain the last entry in this structure */ - struct DCTPersistentStatStruc persistentData; -} __packed; - -/*=============================================================================== - Local Error Status Codes (DCTStatStruc.ErrCode) -===============================================================================*/ -#define SC_RunningOK 0 -#define SC_VarianceErr 1 /* Running non-optimally*/ -#define SC_StopError 2 /* Not Running*/ -#define SC_FatalErr 3 /* Fatal Error, MCTB has exited immediately*/ - -/*=============================================================================== - Local Error Status (DCTStatStruc.ErrStatus[31:0]) -===============================================================================*/ -#define SB_NoDimms 0 -#define SB_DIMMChkSum 1 -#define SB_DimmMismatchM 2 /* dimm module type(buffer) mismatch*/ -#define SB_DimmMismatchT 3 /* dimm CL/T mismatch*/ -#define SB_DimmMismatchO 4 /* dimm organization mismatch (128-bit)*/ -#define SB_NoTrcTrfc 5 /* SPD missing Trc or Trfc info*/ -#define SB_NoCycTime 6 /* SPD missing byte 23 or 25*/ -#define SB_BkIntDis 7 /* Bank interleave requested but not enabled*/ -#define SB_DramECCDis 8 /* Dram ECC requested but not enabled*/ -#define SB_SpareDis 9 /* Online spare requested but not enabled*/ -#define SB_MinimumMode 10 /* Running in Minimum Mode*/ -#define SB_NORCVREN 11 /* No DQS Receiver Enable pass window found*/ -#define SB_CHA2BRCVREN 12 /* DQS Rcvr En pass window CHA to CH B too large*/ -#define SB_SmallRCVR 13 /* DQS Rcvr En pass window too small (far right of dynamic range)*/ -#define SB_NODQSPOS 14 /* No DQS-DQ passing positions*/ -#define SB_SMALLDQS 15 /* DQS-DQ passing window too small*/ -#define SB_DCBKScrubDis 16 /* DCache scrub requested but not enabled */ - -/*=============================================================================== - Local Configuration Status (DCTStatStruc.Status[31:0]) -===============================================================================*/ -#define SB_Registered 0 /* All DIMMs are Registered*/ -#define SB_ECCDIMMs 1 /* All banks ECC capable*/ -#define SB_PARDIMMs 2 /* All banks Addr/CMD Parity capable*/ -#define SB_DiagClks 3 /* Jedec ALL slots clock enable diag mode*/ -#define SB_128bitmode 4 /* DCT in 128-bit mode operation*/ -#define SB_64MuxedMode 5 /* DCT in 64-bit mux'ed mode.*/ -#define SB_2TMode 6 /* 2T CMD timing mode is enabled.*/ -#define SB_SWNodeHole 7 /* Remapping of Node Base on this Node to create a gap.*/ -#define SB_HWHole 8 /* Memory Hole created on this Node using HW remapping.*/ -#define SB_Over400MHz 9 /* DCT freq >= 400MHz flag*/ -#define SB_DQSPos_Pass2 10 /* Using for TrainDQSPos DIMM0/1, when freq >= 400MHz*/ -#define SB_DQSRcvLimit 11 /* Using for DQSRcvEnTrain to know we have reached to upper bound.*/ -#define SB_ExtConfig 12 /* Indicator the default setting for extend PCI configuration support*/ - - - - -/*=============================================================================== - NVRAM/run-time-configurable Items -===============================================================================*/ -/*Platform Configuration*/ -#define NV_PACK_TYPE 0 /* CPU Package Type (2-bits) - 0 = NPT L1 - 1 = NPT M2 - 2 = NPT S1*/ -#define NV_MAX_NODES 1 /* Number of Nodes/Sockets (4-bits)*/ -#define NV_MAX_DIMMS 2 /* Number of DIMM slots for the specified Node ID (4-bits)*/ -#define NV_MAX_MEMCLK 3 /* Maximum platform demonstrated Memclock (10-bits) - 200 = 200MHz (DDR400) - 266 = 266MHz (DDR533) - 333 = 333MHz (DDR667) - 400 = 400MHz (DDR800)*/ -#define NV_MIN_MEMCLK 4 /* Minimum platform demonstrated Memclock (10-bits) */ -#define NV_ECC_CAP 5 /* Bus ECC capable (1-bits) - 0 = Platform not capable - 1 = Platform is capable*/ -#define NV_4RANKType 6 /* Quad Rank DIMM slot type (2-bits) - 0 = Normal - 1 = R4 (4-Rank Registered DIMMs in AMD server configuration) - 2 = S4 (Unbuffered SO-DIMMs)*/ -#define NV_BYPMAX 7 /* Value to set DcqBypassMax field (See Function 2, Offset 94h, [27:24] of BKDG for field definition). - 4 = 4 times bypass (normal for non-UMA systems) - 7 = 7 times bypass (normal for UMA systems)*/ -#define NV_RDWRQBYP 8 /* Value to set RdWrQByp field (See Function 2, Offset A0h, [3:2] of BKDG for field definition). - 2 = 8 times (normal for non-UMA systems) - 3 = 16 times (normal for UMA systems)*/ - - -/*Dram Timing*/ -#define NV_MCTUSRTMGMODE 10 /* User Memclock Mode (2-bits) - 0 = Auto, no user limit - 1 = Auto, user limit provided in NV_MemCkVal - 2 = Manual, user value provided in NV_MemCkVal*/ -#define NV_MemCkVal 11 /* Memory Clock Value (2-bits) - 0 = 200MHz - 1 = 266MHz - 2 = 333MHz - 3 = 400MHz*/ - -/*Dram Configuration*/ -#define NV_BankIntlv 20 /* Dram Bank (chip-select) Interleaving (1-bits) - 0 = disable - 1 = enable*/ -#define NV_AllMemClks 21 /* Turn on All DIMM clocks (1-bits) - 0 = normal - 1 = enable all memclocks*/ -#define NV_SPDCHK_RESTRT 22 /* SPD Check control bitmap (1-bits) - 0 = Exit current node init if any DIMM has SPD checksum error - 1 = Ignore faulty SPD checksums (Note: DIMM cannot be enabled)*/ -#define NV_DQSTrainCTL 23 /* DQS Signal Timing Training Control - 0 = skip DQS training - 1 = perform DQS training*/ -#define NV_NodeIntlv 24 /* Node Memory Interleaving (1-bits) - 0 = disable - 1 = enable*/ -#define NV_BurstLen32 25 /* BurstLength32 for 64-bit mode (1-bits) - 0 = disable (normal) - 1 = enable (4 beat burst when width is 64-bits)*/ - -/*Dram Power*/ -#define NV_CKE_PDEN 30 /* CKE based power down mode (1-bits) - 0 = disable - 1 = enable*/ -#define NV_CKE_CTL 31 /* CKE based power down control (1-bits) - 0 = per Channel control - 1 = per Chip select control*/ -#define NV_CLKHZAltVidC3 32 /* Memclock tri-stating during C3 and Alt VID (1-bits) - 0 = disable - 1 = enable*/ - -/*Memory Map/Mgt.*/ -#define NV_BottomIO 40 /* Bottom of 32-bit IO space (8-bits) - NV_BottomIO[7:0]=Addr[31:24]*/ -#define NV_BottomUMA 41 /* Bottom of shared graphics dram (8-bits) - NV_BottomUMA[7:0]=Addr[31:24]*/ -#define NV_MemHole 42 /* Memory Hole Remapping (1-bits) - 0 = disable - 1 = enable */ - -/*ECC*/ -#define NV_ECC 50 /* Dram ECC enable*/ -#define NV_NBECC 52 /* ECC MCE enable*/ -#define NV_ChipKill 53 /* Chip-Kill ECC Mode enable*/ -#define NV_ECCRedir 54 /* Dram ECC Redirection enable*/ -#define NV_DramBKScrub 55 /* Dram ECC Background Scrubber CTL*/ -#define NV_L2BKScrub 56 /* L2 ECC Background Scrubber CTL*/ -#define NV_L3BKScrub 57 /* L3 ECC Background Scrubber CTL*/ -#define NV_DCBKScrub 58 /* DCache ECC Background Scrubber CTL*/ -#define NV_CS_SpareCTL 59 /* Chip Select Spare Control bit 0: - 0 = disable Spare - 1 = enable Spare */ - /* Chip Select Spare Control bit 1-4: - Reserved, must be zero*/ -#define NV_SyncOnUnEccEn 61 /* SyncOnUnEccEn control - 0 = disable - 1 = enable*/ -#define NV_Unganged 62 - -#define NV_ChannelIntlv 63 /* Channel Interleaving (3-bits) - xx0b = disable - yy1b = enable with DctSelIntLvAddr set to yyb */ - -#define NV_MAX_DIMMS_PER_CH 64 /* Maximum number of DIMMs per channel */ - -#include <northbridge/amd/amdfam10/amdfam10.h> - -/*=============================================================================== - CBMEM storage -===============================================================================*/ -struct amdmct_memory_info { - struct MCTStatStruc mct_stat; - struct DCTStatStruc dct_stat[MAX_NODES_SUPPORTED]; - uint16_t ecc_enabled; - uint16_t ecc_scrub_rate; -} __packed; - -u32 Get_NB32(u32 dev, u32 reg); -void Set_NB32(u32 dev, u32 reg, u32 val); -u32 Get_NB32_index(u32 dev, u32 index_reg, u32 index); -void Set_NB32_index(u32 dev, u32 index_reg, u32 index, u32 data); -u32 Get_NB32_index_wait(u32 dev, u32 index_reg, u32 index); -void Set_NB32_index_wait(u32 dev, u32 index_reg, u32 index, u32 data); -u32 OtherTiming_A_D(struct DCTStatStruc *pDCTstat, u32 val); -void mct_ForceAutoPrecharge_D(struct DCTStatStruc *pDCTstat, u32 dct); -u32 Modify_D3CMP(struct DCTStatStruc *pDCTstat, u32 dct, u32 value); -u8 mct_checkNumberOfDqsRcvEn_1Pass(u8 pass); -u32 SetupDqsPattern_1PassA(u8 Pass); -u32 SetupDqsPattern_1PassB(u8 Pass); -u8 mct_Get_Start_RcvrEnDly_1Pass(u8 Pass); -u8 mct_Average_RcvrEnDly_Pass(struct DCTStatStruc *pDCTstat, u8 RcvrEnDly, u8 RcvrEnDlyLimit, u8 Channel, u8 Receiver, u8 Pass); -void CPUMemTyping_D(struct MCTStatStruc *pMCTstat, struct DCTStatStruc *pDCTstatA); -void UMAMemTyping_D(struct MCTStatStruc *pMCTstat, struct DCTStatStruc *pDCTstatA); -uint64_t mctGetLogicalCPUID(u32 Node); -u8 ECCInit_D(struct MCTStatStruc *pMCTstat, struct DCTStatStruc *pDCTstatA); -void TrainReceiverEn_D(struct MCTStatStruc *pMCTstat, struct DCTStatStruc *pDCTstatA, u8 Pass); -void mct_TrainDQSPos_D(struct MCTStatStruc *pMCTstat, struct DCTStatStruc *pDCTstatA); -void mctSetEccDQSRcvrEn_D(struct MCTStatStruc *pMCTstat, struct DCTStatStruc *pDCTstatA); -void TrainMaxReadLatency_D(struct MCTStatStruc *pMCTstat, struct DCTStatStruc *pDCTstatA); -void mct_EndDQSTraining_D(struct MCTStatStruc *pMCTstat,struct DCTStatStruc *pDCTstatA); -void mct_SetRcvrEnDly_D(struct DCTStatStruc *pDCTstat, u8 RcvrEnDly, u8 FinalValue, u8 Channel, u8 Receiver, u32 dev, u32 index_reg, u8 Addl_Index, u8 Pass); -void SetEccDQSRcvrEn_D(struct DCTStatStruc *pDCTstat, u8 Channel); -void mctGet_PS_Cfg_D(struct MCTStatStruc *pMCTstat, struct DCTStatStruc *pDCTstat, u32 dct); -void InterleaveBanks_D(struct MCTStatStruc *pMCTstat, struct DCTStatStruc *pDCTstat, u8 dct); -void mct_SetDramConfigHi_D(struct DCTStatStruc *pDCTstat, u32 dct, u32 DramConfigHi); -void mct_DramInit_Hw_D(struct MCTStatStruc *pMCTstat, struct DCTStatStruc *pDCTstat, u8 dct); -void SyncSetting(struct DCTStatStruc *pDCTstat); -void mct_SetClToNB_D(struct MCTStatStruc *pMCTstat, struct DCTStatStruc *pDCTstat); -void mct_SetWbEnhWsbDis_D(struct MCTStatStruc *pMCTstat, struct DCTStatStruc *pDCTstat); -void mct_TrainRcvrEn_D(struct MCTStatStruc *pMCTstat, struct DCTStatStruc *pDCTstat, u8 Pass); -void mct_EnableDimmEccEn_D(struct MCTStatStruc *pMCTstat, struct DCTStatStruc *pDCTstat, u8 _DisableDramECC); -u32 procOdtWorkaround(struct DCTStatStruc *pDCTstat, u32 dct, u32 val); -void mct_BeforeDramInit_D(struct DCTStatStruc *pDCTstat, u32 dct); -void InterleaveNodes_D(struct MCTStatStruc *pMCTstat, struct DCTStatStruc *pDCTstatA); -void InterleaveChannels_D(struct MCTStatStruc *pMCTstat, struct DCTStatStruc *pDCTstatA); -void mct_BeforeDQSTrain_Samp_D(struct MCTStatStruc *pMCTstat, struct DCTStatStruc *pDCTstat); -void StoreDQSDatStrucVal_D(struct MCTStatStruc *pMCTstat, struct DCTStatStruc *pDCTstat, u8 ChipSel); -void phyAssistedMemFnceTraining(struct MCTStatStruc *pMCTstat, struct DCTStatStruc *pDCTstatA); -u8 mct_SaveRcvEnDly_D_1Pass(struct DCTStatStruc *pDCTstat, u8 pass); -u32 CheckNBCOFAutoPrechg(struct DCTStatStruc *pDCTstat, u32 dct); -u8 mct_AdjustDQSPosDelay_D(struct DCTStatStruc *pDCTstat, u8 dly); -void mct_AdjustScrub_D(struct DCTStatStruc *pDCTstat, u16 *scrub_request); -u8 mct_InitReceiver_D(struct DCTStatStruc *pDCTstat, u8 dct); -void mct_Wait(u32 cycles); -u8 mct_RcvrRankEnabled_D(struct MCTStatStruc *pMCTstat, struct DCTStatStruc *pDCTstat, u8 Channel, u8 ChipSel); -u32 mct_GetRcvrSysAddr_D(struct MCTStatStruc *pMCTstat, struct DCTStatStruc *pDCTstat, u8 channel, u8 receiver, u8 *valid); -void mct_Read1LTestPattern_D(struct MCTStatStruc *pMCTstat, struct DCTStatStruc *pDCTstat, u32 addr); -void EarlySampleSupport_D(void); - -void mctAutoInitMCT_D(struct MCTStatStruc *pMCTstat, struct DCTStatStruc *pDCTstatA); -void mct_AdjustDelayRange_D(struct MCTStatStruc *pMCTstat, - struct DCTStatStruc *pDCTstat, u8 *dqs_pos); -void mct_EnableDatIntlv_D(struct MCTStatStruc *pMCTstat, - struct DCTStatStruc *pDCTstat); -void MCTMemClrSync_D(struct MCTStatStruc *pMCTstat, - struct DCTStatStruc *pDCTstatA); -void beforeInterleaveChannels_D(struct DCTStatStruc *pDCTstatA, u8 *enabled); -u8 mct_checkFenceHoleAdjust_D(struct MCTStatStruc *pMCTstat, - struct DCTStatStruc *pDCTstat, u8 DQSDelay, - u8 ChipSel, u8 *result); -void proc_IOCLFLUSH_D(u32 addr_hi); -void mct_Write1LTestPattern_D(struct MCTStatStruc *pMCTstat, - struct DCTStatStruc *pDCTstat, - u32 TestAddr, u8 pattern); -u8 NodePresent_D(u8 Node); -void DCTMemClr_Init_D(struct MCTStatStruc *pMCTstat, - struct DCTStatStruc *pDCTstat); -void MCTMemClr_D(struct MCTStatStruc *pMCTstat, - struct DCTStatStruc *pDCTstatA); -void print_debug_dqs(const char *str, u32 val, u8 level); -void print_debug_dqs_pair(const char *str, u32 val, const char *str2, u32 val2, u8 level); -u8 mct_DisableDimmEccEn_D(struct MCTStatStruc *pMCTstat, - struct DCTStatStruc *pDCTstat); -void ResetDCTWrPtr_D(u32 dev, u32 index_reg, u32 index); -void SetTargetWTIO_D(u32 TestAddr); -void ResetTargetWTIO_D(void); -u32 mct_GetMCTSysAddr_D(struct MCTStatStruc *pMCTstat, - struct DCTStatStruc *pDCTstat, u8 Channel, - u8 receiver, u8 *valid); -#endif |