diff options
Diffstat (limited to 'src/northbridge/amd/amdk8/raminit.c')
-rw-r--r-- | src/northbridge/amd/amdk8/raminit.c | 16 |
1 files changed, 8 insertions, 8 deletions
diff --git a/src/northbridge/amd/amdk8/raminit.c b/src/northbridge/amd/amdk8/raminit.c index e55f4b898f..83ae83032a 100644 --- a/src/northbridge/amd/amdk8/raminit.c +++ b/src/northbridge/amd/amdk8/raminit.c @@ -553,7 +553,7 @@ static void hw_enable_ecc(const struct mem_controller *ctrl) if (nbcap & NBCAP_ECC) { dcl |= DCL_DimmEccEn; } - if (HAVE_OPTION_TABLE && + if (CONFIG_HAVE_OPTION_TABLE && read_option(CMOS_VSTART_ECC_memory, CMOS_VLEN_ECC_memory, 1) == 0) { dcl &= ~DCL_DimmEccEn; } @@ -867,7 +867,7 @@ static void set_top_mem(unsigned tom_k, unsigned hole_startk) * so I can see my rom chip and other I/O devices. */ if (tom_k >= 0x003f0000) { -#if HW_MEM_HOLE_SIZEK != 0 +#if CONFIG_HW_MEM_HOLE_SIZEK != 0 if (hole_startk != 0) { tom_k = hole_startk; } else @@ -1104,7 +1104,7 @@ static void order_dimms(const struct mem_controller *ctrl) { unsigned long tom_k, base_k; - if ((!HAVE_OPTION_TABLE) || + if ((!CONFIG_HAVE_OPTION_TABLE) || read_option(CMOS_VSTART_interleave_chip_selects, CMOS_VLEN_interleave_chip_selects, 1) != 0) { tom_k = interleave_chip_selects(ctrl); } else { @@ -1408,7 +1408,7 @@ static struct spd_set_memclk_result spd_set_memclk(const struct mem_controller * min_cycle_time = min_cycle_times[(value >> NBCAP_MEMCLK_SHIFT) & NBCAP_MEMCLK_MASK]; bios_cycle_time = min_cycle_times[ read_option(CMOS_VSTART_max_mem_clock, CMOS_VLEN_max_mem_clock, 0)]; - if (HAVE_OPTION_TABLE && bios_cycle_time > min_cycle_time) { + if (CONFIG_HAVE_OPTION_TABLE && bios_cycle_time > min_cycle_time) { min_cycle_time = bios_cycle_time; } min_latency = 2; @@ -2111,7 +2111,7 @@ static void sdram_set_spd_registers(const struct mem_controller *ctrl) return; } -#if HW_MEM_HOLE_SIZEK != 0 +#if CONFIG_HW_MEM_HOLE_SIZEK != 0 static uint32_t hoist_memory(int controllers, const struct mem_controller *ctrl,unsigned hole_startk, int i) { int ii; @@ -2170,10 +2170,10 @@ static void set_hw_mem_hole(int controllers, const struct mem_controller *ctrl) uint32_t hole_startk; int i; - hole_startk = 4*1024*1024 - HW_MEM_HOLE_SIZEK; + hole_startk = 4*1024*1024 - CONFIG_HW_MEM_HOLE_SIZEK; printk_spew("Handling memory hole at 0x%08x (default)\n", hole_startk); -#if HW_MEM_HOLE_SIZE_AUTO_INC == 1 +#if CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC == 1 /* We need to double check if hole_startk is valid. * If it is equal to the dram base address in K (base_k), * we need to decrease it. @@ -2328,7 +2328,7 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl) printk_debug(" done\n"); } -#if HW_MEM_HOLE_SIZEK != 0 +#if CONFIG_HW_MEM_HOLE_SIZEK != 0 // init hw mem hole here /* DramHoleValid bit only can be set after MemClrStatus is set by Hardware */ if (!is_cpu_pre_e0()) |