diff options
Diffstat (limited to 'src/northbridge/amd/amdk8/coherent_ht.c')
-rw-r--r-- | src/northbridge/amd/amdk8/coherent_ht.c | 591 |
1 files changed, 591 insertions, 0 deletions
diff --git a/src/northbridge/amd/amdk8/coherent_ht.c b/src/northbridge/amd/amdk8/coherent_ht.c new file mode 100644 index 0000000000..9b799b3d31 --- /dev/null +++ b/src/northbridge/amd/amdk8/coherent_ht.c @@ -0,0 +1,591 @@ +static void setup_coherent_ht_domain(void) +{ + static const unsigned int register_values[] = { + /* Routing Table Node i + * F0:0x40 i = 0, + * F0:0x44 i = 1, + * F0:0x48 i = 2, + * F0:0x4c i = 3, + * F0:0x50 i = 4, + * F0:0x54 i = 5, + * F0:0x58 i = 6, + * F0:0x5c i = 7 + * [ 0: 3] Request Route + * [0] Route to this node + * [1] Route to Link 0 + * [2] Route to Link 1 + * [3] Route to Link 2 + * [11: 8] Response Route + * [0] Route to this node + * [1] Route to Link 0 + * [2] Route to Link 1 + * [3] Route to Link 2 + * [19:16] Broadcast route + * [0] Route to this node + * [1] Route to Link 0 + * [2] Route to Link 1 + * [3] Route to Link 2 + */ + PCI_ADDR(0, 0x18, 0, 0x40), 0xfff0f0f0, 0x00010101, + PCI_ADDR(0, 0x18, 0, 0x44), 0xfff0f0f0, 0x00010101, + PCI_ADDR(0, 0x18, 0, 0x48), 0xfff0f0f0, 0x00010101, + PCI_ADDR(0, 0x18, 0, 0x4c), 0xfff0f0f0, 0x00010101, + PCI_ADDR(0, 0x18, 0, 0x50), 0xfff0f0f0, 0x00010101, + PCI_ADDR(0, 0x18, 0, 0x54), 0xfff0f0f0, 0x00010101, + PCI_ADDR(0, 0x18, 0, 0x58), 0xfff0f0f0, 0x00010101, + PCI_ADDR(0, 0x18, 0, 0x5c), 0xfff0f0f0, 0x00010101, + + /* Hypetransport Transaction Control Register + * F0:0x68 + * [ 0: 0] Disable read byte probe + * 0 = Probes issues + * 1 = Probes not issued + * [ 1: 1] Disable Read Doubleword probe + * 0 = Probes issued + * 1 = Probes not issued + * [ 2: 2] Disable write byte probes + * 0 = Probes issued + * 1 = Probes not issued + * [ 3: 3] Disable Write Doubleword Probes + * 0 = Probes issued + * 1 = Probes not issued. + * [ 4: 4] Disable Memroy Controller Target Start + * 0 = TgtStart packets are generated + * 1 = TgtStart packets are not generated. + * [ 5: 5] CPU1 Enable + * 0 = Second CPU disabled or not present + * 1 = Second CPU enabled. + * [ 6: 6] CPU Request PassPW + * 0 = CPU requests do not pass posted writes + * 1 = CPU requests pass posted writes. + * [ 7: 7] CPU read Respons PassPW + * 0 = CPU Responses do not pass posted writes + * 1 = CPU responses pass posted writes. + * [ 8: 8] Disable Probe Memory Cancel + * 0 = Probes may generate MemCancels + * 1 = Probes may not generate MemCancels + * [ 9: 9] Disable Remote Probe Memory Cancel. + * 0 = Probes hitting dirty blocks generate memory cancel packets + * 1 = Only probed caches on the same node as the memory controller + * generate cancel packets. + * [10:10] Disable Fill Probe + * 0 = Probes issued for cache fills + * 1 = Probes not issued for cache fills. + * [11:11] Response PassPw + * 0 = Downstream response PassPW based on original request + * 1 = Downstream response PassPW set to 1 + * [12:12] Change ISOC to Ordered + * 0 = Bit 1 of coherent HT RdSz/WrSz command used for iosynchronous prioritization + * 1 = Bit 1 of coherent HT RdSz/WrSz command used for ordering. + * [14:13] Buffer Release Priority select + * 00 = 64 + * 01 = 16 + * 10 = 8 + * 11 = 2 + * [15:15] Limit Coherent HT Configuration Space Range + * 0 = No coherent HT configuration space restrictions + * 1 = Limit coherent HT configuration space based on node count + * [16:16] Local Interrupt Conversion Enable. + * 0 = ExtInt/NMI interrups unaffected. + * 1 = ExtInt/NMI broadcat interrupts converted to LINT0/1 + * [17:17] APIC Extended Broadcast Enable. + * 0 = APIC broadcast is 0F + * 1 = APIC broadcast is FF + * [18:18] APIC Extended ID Enable + * 0 = APIC ID is 4 bits. + * 1 = APIC ID is 8 bits. + * [19:19] APIC Extended Spurious Vector Enable + * 0 = Lower 4 bits of spurious vector are read-only 1111 + * 1 = Lower 4 bits of spurious vecotr are writeable. + * [20:20] Sequence ID Source Node Enable + * 0 = Normal operation + * 1 = Keep SeqID on routed packets for debugging. + * [22:21] Downstream non-posted request limit + * 00 = No limit + * 01 = Limited to 1 + * 10 = Limited to 4 + * 11 = Limited to 8 + * [23:23] RESERVED + * [25:24] Medium-Priority Bypass Count + * - Maximum # of times a medium priority access can pass a low + * priority access before Medium-Priority mode is disabled for one access. + * [27:26] High-Priority Bypass Count + * - Maximum # of times a high prioirty access can pass a medium or low + * priority access before High-prioirty mode is disabled for one access. + * [28:28] Enable High Priority CPU Reads + * 0 = Cpu reads are medium prioirty + * 1 = Cpu reads are high prioirty + * [29:29] Disable Low Priority Writes + * 0 = Non-isochronous writes are low priority + * 1 = Non-isochronous writes are medium prioirty + * [30:30] Disable High Priority Isochronous writes + * 0 = Isochronous writes are high priority + * 1 = Isochronous writes are medium priority + * [31:31] Disable Medium Priority Isochronous writes + * 0 = Isochronous writes are medium are high + * 1 = With bit 30 set makes Isochrouns writes low priority. + */ + PCI_ADDR(0, 0x18, 0, 0x68), 0x00800000, 0x0f00840f, + /* HT Initialization Control Register + * F0:0x6C + * [ 0: 0] Routing Table Disable + * 0 = Packets are routed according to routing tables + * 1 = Packets are routed according to the default link field + * [ 1: 1] Request Disable (BSP should clear this) + * 0 = Request packets may be generated + * 1 = Request packets may not be generated. + * [ 3: 2] Default Link (Read-only) + * 00 = LDT0 + * 01 = LDT1 + * 10 = LDT2 + * 11 = CPU on same node + * [ 4: 4] Cold Reset + * - Scratch bit cleared by a cold reset + * [ 5: 5] BIOS Reset Detect + * - Scratch bit cleared by a cold reset + * [ 6: 6] INIT Detect + * - Scratch bit cleared by a warm or cold reset not by an INIT + * + */ + PCI_ADDR(0, 0x18, 0, 0x6C), 0xffffff8c, 0x00000000 | (1 << 6) |(1 << 5)| (1 << 4), + /* LDTi Capabilities Registers + * F0:0x80 i = 0, + * F0:0xA0 i = 1, + * F0:0xC0 i = 2, + */ + /* LDTi Link Control Registrs + * F0:0x84 i = 0, + * F0:0xA4 i = 1, + * F0:0xC4 i = 2, + * [ 1: 1] CRC Flood Enable + * 0 = Do not generate sync packets on CRC error + * 1 = Generate sync packets on CRC error + * [ 2: 2] CRC Start Test (Read-Only) + * [ 3: 3] CRC Force Frame Error + * 0 = Do not generate bad CRC + * 1 = Generate bad CRC + * [ 4: 4] Link Failure + * 0 = No link failure detected + * 1 = Link failure detected + * [ 5: 5] Initialization Complete + * 0 = Initialization not complete + * 1 = Initialization complete + * [ 6: 6] Receiver off + * 0 = Recevier on + * 1 = Receiver off + * [ 7: 7] Transmitter Off + * 0 = Transmitter on + * 1 = Transmitter off + * [ 9: 8] CRC_Error + * 00 = No error + * [0] = 1 Error on byte lane 0 + * [1] = 1 Error on byte lane 1 + * [12:12] Isochrnous Enable (Read-Only) + * [13:13] HT Stop Tristate Enable + * 0 = Driven during an LDTSTOP_L + * 1 = Tristated during and LDTSTOP_L + * [14:14] Extended CTL Time + * 0 = CTL is asserted for 16 bit times during link initialization + * 1 = CTL is asserted for 50us during link initialization + * [18:16] Max Link Width In (Read-Only?) + * 000 = 8 bit link + * 001 = 16bit link + * [19:19] Doubleword Flow Control in (Read-Only) + * 0 = This link does not support doubleword flow control + * 1 = This link supports doubleword flow control + * [22:20] Max Link Width Out (Read-Only?) + * 000 = 8 bit link + * 001 = 16bit link + * [23:23] Doubleworld Flow Control out (Read-Only) + * 0 = This link does not support doubleword flow control + * 1 = This link supports doubleworkd flow control + * [26:24] Link Width In + * 000 = Use 8 bits + * 001 = Use 16 bits + * 010 = reserved + * 011 = Use 32 bits + * 100 = Use 2 bits + * 101 = Use 4 bits + * 110 = reserved + * 111 = Link physically not connected + * [27:27] Doubleword Flow Control In Enable + * 0 = Doubleword flow control disabled + * 1 = Doubleword flow control enabled (Not currently supported) + * [30:28] Link Width Out + * 000 = Use 8 bits + * 001 = Use 16 bits + * 010 = reserved + * 011 = Use 32 bits + * 100 = Use 2 bits + * 101 = Use 4 bits + * 110 = reserved + * 111 = Link physically not connected + * [31:31] Doubleworld Flow Control Out Enable + * 0 = Doubleworld flow control disabled + * 1 = Doubleword flow control enabled (Not currently supported) + */ + PCI_ADDR(0, 0x18, 0, 0x84), 0x00009c05, 0x11110020, + /* LDTi Frequency/Revision Registers + * F0:0x88 i = 0, + * F0:0xA8 i = 1, + * F0:0xC8 i = 2, + * [ 4: 0] Minor Revision + * Contains the HT Minor revision + * [ 7: 5] Major Revision + * Contains the HT Major revision + * [11: 8] Link Frequency (Takes effect the next time the link is reconnected) + * 0000 = 200Mhz + * 0001 = reserved + * 0010 = 400Mhz + * 0011 = reserved + * 0100 = 600Mhz + * 0101 = 800Mhz + * 0110 = 1000Mhz + * 0111 = reserved + * 1000 = reserved + * 1001 = reserved + * 1010 = reserved + * 1011 = reserved + * 1100 = reserved + * 1101 = reserved + * 1110 = reserved + * 1111 = 100 Mhz + * [15:12] Error (Not currently Implemented) + * [31:16] Indicates the frequency capabilities of the link + * [16] = 1 encoding 0000 of freq supported + * [17] = 1 encoding 0001 of freq supported + * [18] = 1 encoding 0010 of freq supported + * [19] = 1 encoding 0011 of freq supported + * [20] = 1 encoding 0100 of freq supported + * [21] = 1 encoding 0101 of freq supported + * [22] = 1 encoding 0110 of freq supported + * [23] = 1 encoding 0111 of freq supported + * [24] = 1 encoding 1000 of freq supported + * [25] = 1 encoding 1001 of freq supported + * [26] = 1 encoding 1010 of freq supported + * [27] = 1 encoding 1011 of freq supported + * [28] = 1 encoding 1100 of freq supported + * [29] = 1 encoding 1101 of freq supported + * [30] = 1 encoding 1110 of freq supported + * [31] = 1 encoding 1111 of freq supported + */ + PCI_ADDR(0, 0x18, 0, 0x88), 0xfffff0ff, 0x00000200, + /* LDTi Feature Capability + * F0:0x8C i = 0, + * F0:0xAC i = 1, + * F0:0xCC i = 2, + */ + /* LDTi Buffer Count Registers + * F0:0x90 i = 0, + * F0:0xB0 i = 1, + * F0:0xD0 i = 2, + */ + /* LDTi Bus Number Registers + * F0:0x94 i = 0, + * F0:0xB4 i = 1, + * F0:0xD4 i = 2, + * For NonCoherent HT specifies the bus number downstream (behind the host bridge) + * [ 0: 7] Primary Bus Number + * [15: 8] Secondary Bus Number + * [23:15] Subordiante Bus Number + * [31:24] reserved + */ + PCI_ADDR(0, 0x18, 0, 0x94), 0xff000000, 0x00ff0000, + /* LDTi Type Registers + * F0:0x98 i = 0, + * F0:0xB8 i = 1, + * F0:0xD8 i = 2, + */ + /* Careful set limit registers before base registers which contain the enables */ + /* DRAM Limit i Registers + * F1:0x44 i = 0 + * F1:0x4C i = 1 + * F1:0x54 i = 2 + * F1:0x5C i = 3 + * F1:0x64 i = 4 + * F1:0x6C i = 5 + * F1:0x74 i = 6 + * F1:0x7C i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 3] Reserved + * [10: 8] Interleave select + * specifies the values of A[14:12] to use with interleave enable. + * [15:11] Reserved + * [31:16] DRAM Limit Address i Bits 39-24 + * This field defines the upper address bits of a 40 bit address + * that define the end of the DRAM region. + */ +#if MEMORY_1024MB + PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x003f0000, +#endif +#if MEMORY_512MB + PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x001f0000, +#endif + PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, + PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, + PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, + PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, + PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, + PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, + PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, + /* DRAM Base i Registers + * F1:0x40 i = 0 + * F1:0x48 i = 1 + * F1:0x50 i = 2 + * F1:0x58 i = 3 + * F1:0x60 i = 4 + * F1:0x68 i = 5 + * F1:0x70 i = 6 + * F1:0x78 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 7: 2] Reserved + * [10: 8] Interleave Enable + * 000 = No interleave + * 001 = Interleave on A[12] (2 nodes) + * 010 = reserved + * 011 = Interleave on A[12] and A[14] (4 nodes) + * 100 = reserved + * 101 = reserved + * 110 = reserved + * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) + * [15:11] Reserved + * [13:16] DRAM Base Address i Bits 39-24 + * This field defines the upper address bits of a 40-bit address + * that define the start of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000003, +#if MEMORY_1024MB + PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00400000, + PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00400000, + PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00400000, + PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00400000, + PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00400000, + PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00400000, + PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00400000, +#endif +#if MEMORY_512MB + PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00200000, + PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00200000, + PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00200000, + PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00200000, + PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00200000, + PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00200000, + PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00200000, +#endif + + /* Memory-Mapped I/O Limit i Registers + * F1:0x84 i = 0 + * F1:0x8C i = 1 + * F1:0x94 i = 2 + * F1:0x9C i = 3 + * F1:0xA4 i = 4 + * F1:0xAC i = 5 + * F1:0xB4 i = 6 + * F1:0xBC i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = Reserved + * [ 6: 6] Reserved + * [ 7: 7] Non-Posted + * 0 = CPU writes may be posted + * 1 = CPU writes must be non-posted + * [31: 8] Memory-Mapped I/O Limit Address i (39-16) + * This field defines the upp adddress bits of a 40-bit address that + * defines the end of a memory-mapped I/O region n + */ + PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00e1ff00, + PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00dfff00, + PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00e3ff00, + PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000b00, + PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00fe0b00, + + /* Memory-Mapped I/O Base i Registers + * F1:0x80 i = 0 + * F1:0x88 i = 1 + * F1:0x90 i = 2 + * F1:0x98 i = 3 + * F1:0xA0 i = 4 + * F1:0xA8 i = 5 + * F1:0xB0 i = 6 + * F1:0xB8 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes disabled + * 1 = Writes Enabled + * [ 2: 2] Cpu Disable + * 0 = Cpu can use this I/O range + * 1 = Cpu requests do not use this I/O range + * [ 3: 3] Lock + * 0 = base/limit registers i are read/write + * 1 = base/limit registers i are read-only + * [ 7: 4] Reserved + * [31: 8] Memory-Mapped I/O Base Address i (39-16) + * This field defines the upper address bits of a 40bit address + * that defines the start of memory-mapped I/O region i + */ + PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00e00003, + PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00d80003, + PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00e20003, + PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000a03, +#if MEMORY_1024MB + PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00400003, +#endif +#if MEMORY_512MB + PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00200003, +#endif + + /* PCI I/O Limit i Registers + * F1:0xC4 i = 0 + * F1:0xCC i = 1 + * F1:0xD4 i = 2 + * F1:0xDC i = 3 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = reserved + * [11: 6] Reserved + * [24:12] PCI I/O Limit Address i + * This field defines the end of PCI I/O region n + * [31:25] Reserved + */ + PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x0000d000, + PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x000ff000, + PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, + + /* PCI I/O Base i Registers + * F1:0xC0 i = 0 + * F1:0xC8 i = 1 + * F1:0xD0 i = 2 + * F1:0xD8 i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 3: 2] Reserved + * [ 4: 4] VGA Enable + * 0 = VGA matches Disabled + * 1 = matches all address < 64K and where A[9:0] is in the + * range 3B0-3BB or 3C0-3DF independen of the base & limit registers + * [ 5: 5] ISA Enable + * 0 = ISA matches Disabled + * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block + * from matching agains this base/limit pair + * [11: 6] Reserved + * [24:12] PCI I/O Base i + * This field defines the start of PCI I/O region n + * [31:25] Reserved + */ + PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x0000d003, + PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00001013, + PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, + + /* Config Base and Limit i Registers + * F1:0xE0 i = 0 + * F1:0xE4 i = 1 + * F1:0xE8 i = 2 + * F1:0xEC i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 2: 2] Device Number Compare Enable + * 0 = The ranges are based on bus number + * 1 = The ranges are ranges of devices on bus 0 + * [ 3: 3] Reserved + * [ 6: 4] Destination Node + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 7] Reserved + * [ 9: 8] Destination Link + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 - Reserved + * [15:10] Reserved + * [23:16] Bus Number Base i + * This field defines the lowest bus number in configuration region i + * [31:24] Bus Number Limit i + * This field defines the highest bus number in configuration regin i + */ + PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000003, + PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, + + }; + int i; + int max; + print_debug("setting up coherent ht domain....\r\n"); + max = sizeof(register_values)/sizeof(register_values[0]); + for(i = 0; i < max; i += 3) { + unsigned long reg; +#if 0 + print_debug_hex32(register_values[i]); + print_debug(" <-"); + print_debug_hex32(register_values[i+2]); + print_debug("\r\n"); +#endif + reg = pci_read_config32(register_values[i]); + reg &= register_values[i+1]; + reg |= register_values[i+2] & ~register_values[i+1]; + pci_write_config32(register_values[i], reg); + } + print_debug("done.\r\n"); +} + |