summaryrefslogtreecommitdiff
path: root/src/mainboard
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard')
-rw-r--r--src/mainboard/google/gale/chromeos.c2
-rw-r--r--src/mainboard/google/gale/mainboard.c73
2 files changed, 34 insertions, 41 deletions
diff --git a/src/mainboard/google/gale/chromeos.c b/src/mainboard/google/gale/chromeos.c
index d01fbbe44f..c4af04853c 100644
--- a/src/mainboard/google/gale/chromeos.c
+++ b/src/mainboard/google/gale/chromeos.c
@@ -78,8 +78,10 @@ enum switch_state {
static void display_pattern(int pattern)
{
+#if IS_ENABLED(notyet)
if (board_id() == BOARD_ID_WHIRLWIND_SP5)
ww_ring_display_pattern(GSBI_ID_7, pattern);
+#endif
}
#define WIPEOUT_MODE_DELAY_MS (8 * 1000)
diff --git a/src/mainboard/google/gale/mainboard.c b/src/mainboard/google/gale/mainboard.c
index 9d99a2c963..a8117af1e3 100644
--- a/src/mainboard/google/gale/mainboard.c
+++ b/src/mainboard/google/gale/mainboard.c
@@ -31,62 +31,53 @@
static void setup_usb(void)
{
-#if !CONFIG_BOARD_VARIANT_AP148
- gpio_tlmm_config_set(USB_ENABLE_GPIO, FUNC_SEL_GPIO,
- GPIO_PULL_UP, GPIO_10MA, GPIO_ENABLE);
- gpio_set(USB_ENABLE_GPIO, 1);
-#endif
usb_clock_config();
setup_usb_host1();
}
-#define TPM_RESET_GPIO 22
-static void setup_tpm(void)
+#define TPM_RESET_GPIO 19
+static void ipq_setup_tpm(void)
{
- if (board_id() != BOARD_ID_PROTO_0)
- return; /* Only proto0 have TPM reset connected to GPIO22 */
-
- gpio_tlmm_config_set(TPM_RESET_GPIO, FUNC_SEL_GPIO, GPIO_PULL_UP,
- GPIO_4MA, GPIO_ENABLE);
- /*
- * Generate a reset pulse. The spec calls for 80 us minimum, let's
- * make it twice as long. If the output was driven low originally, the
- * reset pulse will be even longer.
- */
+#ifdef CONFIG_I2C_TPM
+ gpio_tlmm_config_set(TPM_RESET_GPIO, FUNC_SEL_GPIO,
+ GPIO_PULL_UP, GPIO_6MA, 1);
gpio_set(TPM_RESET_GPIO, 0);
- udelay(160);
+ udelay(100);
gpio_set(TPM_RESET_GPIO, 1);
-}
-
-#define SW_RESET_GPIO 26
-static void assert_sw_reset(void)
-{
- if (board_id() == BOARD_ID_PROTO_0)
- return;
/*
- * only proto0.2 and later care about this. We want to keep the
- * ethernet switch in reset, otherwise it comes up in default
- * (bridging) mode.
+ * ----- Per the SLB 9615XQ1.2 spec -----
+ *
+ * 4.7.1 Reset Timing
+ *
+ * The TPM_ACCESS_x.tpmEstablishment bit has the correct value
+ * and the TPM_ACCESS_x.tpmRegValidSts bit is typically set
+ * within 8ms after RESET# is deasserted.
+ *
+ * The TPM is ready to receive a command after less than 30 ms.
+ *
+ * --------------------------------------
+ *
+ * I'm assuming this means "wait for 30ms"
+ *
+ * If we don't wait here, subsequent QUP I2C accesses
+ * to the TPM either fail or timeout.
*/
- gpio_tlmm_config_set(SW_RESET_GPIO, FUNC_SEL_GPIO,
- GPIO_PULL_UP, GPIO_4MA, GPIO_ENABLE);
+ mdelay(30);
- gpio_set(SW_RESET_GPIO, 1);
+#endif /* CONFIG_I2C_TPM */
}
static void mainboard_init(device_t dev)
{
- /* disable mmu and d-cache before setting up secure world.*/
- dcache_mmu_disable();
- start_tzbsp();
- /* Setup mmu and d-cache again as non secure entries. */
- setup_mmu(DRAM_INITIALIZED);
- start_rpm();
- setup_usb();
- assert_sw_reset();
- setup_tpm();
+ /* disable mmu and d-cache before setting up secure world.*/
+ dcache_mmu_disable();
+ start_tzbsp();
+ /* Setup mmu and d-cache again as non secure entries. */
+ setup_mmu(DRAM_INITIALIZED);
+ setup_usb();
+ ipq_setup_tpm();
#if IS_ENABLED(CONFIG_CHROMEOS)
/* Copy WIFI calibration data into CBMEM. */
@@ -99,7 +90,7 @@ static void mainboard_init(device_t dev)
*
* 48000 * 2 * 16 * 4 = 6144000
*/
- audio_clock_config(6144000);
+ //audio_clock_config(6144000);
}
static void mainboard_enable(device_t dev)