diff options
Diffstat (limited to 'src/mainboard')
38 files changed, 4274 insertions, 243 deletions
diff --git a/src/mainboard/Iwill/DK8S2/Options.lb b/src/mainboard/Iwill/DK8S2/Options.lb index 373d1a98a9..d7b694d1f8 100644 --- a/src/mainboard/Iwill/DK8S2/Options.lb +++ b/src/mainboard/Iwill/DK8S2/Options.lb @@ -51,6 +51,8 @@ uses CC uses HOSTCC uses OBJCOPY +uses CONFIG_USE_INIT + ## ROM_SIZE is the size of boot ROM that this board will use. default ROM_SIZE=524288 diff --git a/src/mainboard/Iwill/DK8X/Options.lb b/src/mainboard/Iwill/DK8X/Options.lb index f9987d4392..0f413f0499 100644 --- a/src/mainboard/Iwill/DK8X/Options.lb +++ b/src/mainboard/Iwill/DK8X/Options.lb @@ -51,6 +51,8 @@ uses CC uses HOSTCC uses OBJCOPY +uses CONFIG_USE_INIT + ## ROM_SIZE is the size of boot ROM that this board will use. default ROM_SIZE=524288 diff --git a/src/mainboard/amd/quartet/Options.lb b/src/mainboard/amd/quartet/Options.lb index 052306ae05..7e2dc489ae 100644 --- a/src/mainboard/amd/quartet/Options.lb +++ b/src/mainboard/amd/quartet/Options.lb @@ -47,6 +47,8 @@ uses CC uses HOSTCC uses OBJCOPY +uses CONFIG_USE_INIT + ### ### Build options diff --git a/src/mainboard/amd/serenade/Options.lb b/src/mainboard/amd/serenade/Options.lb index 11bc28b232..fedc518d8a 100644 --- a/src/mainboard/amd/serenade/Options.lb +++ b/src/mainboard/amd/serenade/Options.lb @@ -47,6 +47,8 @@ uses CC uses HOSTCC uses OBJCOPY +uses CONFIG_USE_INIT + ### ### Build options ### diff --git a/src/mainboard/amd/solo/Options.lb b/src/mainboard/amd/solo/Options.lb index eec85778df..42611440f6 100644 --- a/src/mainboard/amd/solo/Options.lb +++ b/src/mainboard/amd/solo/Options.lb @@ -48,6 +48,8 @@ uses CC uses HOSTCC uses OBJCOPY +uses CONFIG_USE_INIT + ### ### Build options diff --git a/src/mainboard/arima/hdama/Options.lb b/src/mainboard/arima/hdama/Options.lb index 1972c39fe4..773d698ad2 100644 --- a/src/mainboard/arima/hdama/Options.lb +++ b/src/mainboard/arima/hdama/Options.lb @@ -53,6 +53,8 @@ uses OBJCOPY uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN +uses CONFIG_USE_INIT + ### ### Build options ### diff --git a/src/mainboard/ibm/e325/Options.lb b/src/mainboard/ibm/e325/Options.lb index 74f74a787e..9bad595658 100644 --- a/src/mainboard/ibm/e325/Options.lb +++ b/src/mainboard/ibm/e325/Options.lb @@ -47,6 +47,8 @@ uses CC uses HOSTCC uses OBJCOPY +uses CONFIG_USE_INIT + ### ### Build options diff --git a/src/mainboard/island/aruma/Options.lb b/src/mainboard/island/aruma/Options.lb index 4e2cef1ff1..fc9489a29d 100644 --- a/src/mainboard/island/aruma/Options.lb +++ b/src/mainboard/island/aruma/Options.lb @@ -53,6 +53,8 @@ uses CONFIG_GDB_STUB uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN +uses CONFIG_USE_INIT + ### ### Build options ### diff --git a/src/mainboard/newisys/khepri/Options.lb b/src/mainboard/newisys/khepri/Options.lb index c975e08c8f..d80f0c3904 100644 --- a/src/mainboard/newisys/khepri/Options.lb +++ b/src/mainboard/newisys/khepri/Options.lb @@ -47,6 +47,8 @@ uses CC uses HOSTCC uses OBJCOPY +uses CONFIG_USE_INIT + ### ### Build options ### diff --git a/src/mainboard/tyan/s2735/Config.lb b/src/mainboard/tyan/s2735/Config.lb index 6ce12ebfd3..37d6493e74 100644 --- a/src/mainboard/tyan/s2735/Config.lb +++ b/src/mainboard/tyan/s2735/Config.lb @@ -16,6 +16,7 @@ end ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default CONFIG_ROM_STREAM = 1 ## ## Compute where this copy of linuxBIOS will start in the boot rom @@ -34,6 +35,7 @@ default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE ) arch i386 end + ## ## Build the objects we have code for in this directory. ## @@ -42,7 +44,26 @@ driver mainboard.o if HAVE_MP_TABLE object mptable.o end if HAVE_PIRQ_TABLE object irq_tables.o end #object reset.o +if USE_DCACHE_RAM + +if CONFIG_USE_INIT + +makerule ./auto.o + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o auto.o" +end + +else +makerule ./auto.inc + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@" + action "perl -e 's/.rodata/.rom.data/g' -pi $@" + action "perl -e 's/.text/.section .rom.text/g' -pi $@" +end + +end +else ## ## Romcc output @@ -66,13 +87,24 @@ makerule ./auto.inc action "./romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" end +end + ## ## Build our 16 bit and 32 bit linuxBIOS entry code ## mainboardinit cpu/x86/16bit/entry16.inc mainboardinit cpu/x86/32bit/entry32.inc ldscript /cpu/x86/16bit/entry16.lds -ldscript /cpu/x86/32bit/entry32.lds +if USE_DCACHE_RAM + if CONFIG_USE_INIT + ldscript /cpu/x86/32bit/entry32.lds + end + + if CONFIG_USE_INIT + ldscript /cpu/intel/car/cache_as_ram.lds + end +end + ## ## Build our reset vector (This is where linuxBIOS is entered) @@ -85,8 +117,11 @@ else ldscript /cpu/x86/32bit/reset32.lds end +if USE_DCACHE_RAM +else ### Should this be in the northbridge code? mainboardinit arch/i386/lib/cpu_reset.inc +end ## ## Include an id string (For safe flashing) @@ -94,23 +129,40 @@ mainboardinit arch/i386/lib/cpu_reset.inc mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds +if USE_DCACHE_RAM +## +## Setup Cache-As-Ram +## +mainboardinit cpu/intel/car/cache_as_ram.inc +end + ### ### This is the early phase of linuxBIOS startup ### Things are delicate and we test to see if we should ### failover to another image. ### if USE_FALLBACK_IMAGE - ldscript /arch/i386/lib/failover.lds - mainboardinit ./failover.inc +if USE_DCACHE_RAM + ldscript /arch/i386/lib/failover.lds +else + ldscript /arch/i386/lib/failover.lds + mainboardinit ./failover.inc +end end - -### -### O.k. We aren't just an intermediary anymore! -### ## ## Setup RAM ## +if USE_DCACHE_RAM + +if CONFIG_USE_INIT +initobject auto.o +else +mainboardinit ./auto.inc +end + +else +# ROMCC mainboardinit cpu/x86/fpu/enable_fpu.inc mainboardinit cpu/x86/mmx/enable_mmx.inc mainboardinit cpu/x86/sse/enable_sse.inc @@ -118,15 +170,16 @@ mainboardinit ./auto.inc mainboardinit cpu/x86/sse/disable_sse.inc mainboardinit cpu/x86/mmx/disable_mmx.inc +end + ## ## Include the secondary Configuration files ## -dir /pc80 - if CONFIG_CHIP_NAME config chip.h end + # sample config for tyan/s2735 chip northbridge/intel/e7501 device pci_domain 0 on @@ -135,7 +188,12 @@ chip northbridge/intel/e7501 device pci 2.0 on chip southbridge/intel/i82870 device pci 1c.0 on end - device pci 1d.0 on end + device pci 1d.0 on + chip drivers/pci/onboard + device pci 1.0 on end # intel lan + device pci 1.1 on end + end + end device pci 1e.0 on end device pci 1f.0 on end end @@ -147,42 +205,55 @@ chip northbridge/intel/e7501 device pci 1d.2 on end device pci 1d.3 on end device pci 1d.7 on end - device pci 1e.0 on end + device pci 1e.0 on + chip drivers/pci/onboard + device pci 1.0 on end # intel lan 10/100 + end + chip drivers/pci/onboard + device pci 2.0 on end # ati + end + end device pci 1f.0 on - # device pci 8.0 end - chip superio/winbond/w83627hf - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.6 off end # CIR - device pnp 2e.7 off end # GAME_MIDI_GIPO1 - device pnp 2e.8 off end # GPIO2 - device pnp 2e.9 off end # GPIO3 - device pnp 2e.a off end # ACPI - device pnp 2e.b on # HW Monitor - io 0x60 = 0x290 - end - end + chip superio/winbond/w83627hf + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off # CIR + io 0x60 = 0x100 + end + device pnp 2e.7 off # GAME_MIDI_GIPO1 + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 off end # GPIO2 + device pnp 2e.9 off end # GPIO3 + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end end device pci 1f.1 off end device pci 1f.2 on end diff --git a/src/mainboard/tyan/s2735/Options.lb b/src/mainboard/tyan/s2735/Options.lb index 98c7e50f4f..16b23a66bd 100644 --- a/src/mainboard/tyan/s2735/Options.lb +++ b/src/mainboard/tyan/s2735/Options.lb @@ -9,7 +9,9 @@ uses HARD_RESET_FUNCTION uses IRQ_SLOT_COUNT uses HAVE_OPTION_TABLE uses CONFIG_MAX_CPUS +uses CONFIG_MAX_PHYSICAL_CPUS uses CONFIG_LOGICAL_CPUS +uses SERIAL_CPU_INIT uses CONFIG_IOAPIC uses CONFIG_SMP uses FALLBACK_SIZE @@ -33,8 +35,15 @@ uses LB_CKS_LOC uses MAINBOARD_PART_NUMBER uses MAINBOARD_VENDOR uses MAINBOARD +uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID +uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID uses LINUXBIOS_EXTRA_VERSION uses _RAMBASE +uses CONFIG_GDB_STUB +uses CROSS_COMPILE +uses CC +uses HOSTCC +uses OBJCOPY uses TTYS0_BAUD uses TTYS0_BASE uses TTYS0_LCS @@ -44,31 +53,35 @@ uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL uses CONFIG_CONSOLE_SERIAL8250 uses CONFIG_UDELAY_TSC uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 +uses CONFIG_CONSOLE_BTEXT uses HAVE_INIT_TIMER uses CONFIG_GDB_STUB -uses CROSS_COMPILE -uses CC -uses HOSTCC -uses OBJCOPY uses CONFIG_CHIP_NAME +uses CONFIG_CONSOLE_VGA +uses CONFIG_PCI_ROM_RUN -### -### Build options -### +uses USE_DCACHE_RAM +uses DCACHE_RAM_BASE +uses DCACHE_RAM_SIZE +uses CONFIG_USE_INIT -## ## ROM_SIZE is the size of boot ROM that this board will use. -#512K bytes -#default ROM_SIZE=524288 +#512K bytes +default ROM_SIZE=524288 #1M bytes -default ROM_SIZE=1048576 +#default ROM_SIZE=1048576 + ## ## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use ## default FALLBACK_SIZE=131072 +### +### Build options +### + ## ## Build code for the fallback boot ## @@ -79,23 +92,21 @@ default HAVE_FALLBACK_BOOT=1 ## default HAVE_HARD_RESET=1 -## -## Funky hard reset implementation -## -#default HARD_RESET_BUS=3 -#default HARD_RESET_DEVICE=4 -#default HARD_RESET_FUNCTION=0 +default HARD_RESET_BUS=1 +default HARD_RESET_DEVICE=4 +default HARD_RESET_FUNCTION=0 ## Delay timer options ## default CONFIG_UDELAY_TSC=1 default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1 + ## ## Build code to export a programmable irq routing table ## default HAVE_PIRQ_TABLE=1 -default IRQ_SLOT_COUNT=15 +default IRQ_SLOT_COUNT=11 ## ## Build code to export an x86 MP table @@ -121,8 +132,28 @@ default LB_CKS_LOC=123 ## default CONFIG_SMP=1 default CONFIG_MAX_CPUS=4 +default CONFIG_MAX_PHYSICAL_CPUS=2 default CONFIG_LOGICAL_CPUS=1 +default SERIAL_CPU_INIT=0 + +#BTEXT Console +#default CONFIG_CONSOLE_BTEXT=1 + +#VGA Console +#default CONFIG_CONSOLE_VGA=1 +#default CONFIG_PCI_ROM_RUN=1 + +## +## enable CACHE_AS_RAM specifics +## +default USE_DCACHE_RAM=1 +default DCACHE_RAM_BASE=0xF2000000 +#default DCACHE_RAM_BASE=0xcf000 +default DCACHE_RAM_SIZE=0x1000 +#default CONFIG_USE_INIT=1 + + ## ## Build code to setup a generic IOAPIC ## @@ -131,8 +162,10 @@ default CONFIG_IOAPIC=1 ## ## Clean up the motherboard id strings ## -default MAINBOARD_PART_NUMBER="Tyan" -default MAINBOARD_VENDOR="s2735" +default MAINBOARD_PART_NUMBER="s2735" +default MAINBOARD_VENDOR="Tyan" +default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 +default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2735 ### ### LinuxBIOS layout values diff --git a/src/mainboard/tyan/s2735/auto.c b/src/mainboard/tyan/s2735/auto.c index 5874d5ea35..9cf5e50187 100644 --- a/src/mainboard/tyan/s2735/auto.c +++ b/src/mainboard/tyan/s2735/auto.c @@ -10,7 +10,9 @@ #include "option_table.h" #include "pc80/mc146818rtc_early.c" #include "pc80/serial.c" + #include "arch/i386/lib/console.c" + #include "ram/ramtest.c" #include "southbridge/intel/i82801er/i82801er_early_smbus.c" #include "northbridge/intel/e7501/raminit.h" @@ -51,6 +53,7 @@ static inline int spd_read_byte(unsigned device, unsigned address) return smbus_read_byte(device, address); } + #include "northbridge/intel/e7501/raminit.c" #include "northbridge/intel/e7501/reset_test.c" #include "sdram/generic_sdram.c" @@ -87,7 +90,7 @@ static void main(unsigned long bist) #endif if(!bios_reset_detected()) { enable_smbus(); -#if 1 +#if 0 dump_spd_registers(&memctrl[0]); // dump_smbus_registers(); #endif @@ -126,17 +129,16 @@ static void main(unsigned long bist) print_debug_hex32(msr.lo); print_debug("\r\n"); #endif -/* -#if 0 + +#if 0 ram_check(0x00000000, msr.lo+(msr.hi<<32)); -#else -#if 1 +#endif + +#if 0 // Check 16MB of memory @ 0 ram_check(0x00000000, 0x01000000); -#else // Check 16MB of memory @ 2GB - ram_check(0x80000000, 0x81000000); -#endif +// ram_check(0x80000000, 0x81000000); #endif -*/ + } diff --git a/src/mainboard/tyan/s2735/cache_as_ram_auto.c b/src/mainboard/tyan/s2735/cache_as_ram_auto.c new file mode 100644 index 0000000000..ebfc647d10 --- /dev/null +++ b/src/mainboard/tyan/s2735/cache_as_ram_auto.c @@ -0,0 +1,343 @@ +#define ASSEMBLY 1 +#define __ROMCC__ + +#include <stdint.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/romcc_io.h> +#include <cpu/x86/lapic.h> +#include "option_table.h" +#include "pc80/mc146818rtc_early.c" +#include "pc80/serial.c" +#include "arch/i386/lib/console.c" +#include "ram/ramtest.c" + +#if 0 +static void post_code(uint8_t value) { +#if 1 + int i; + for(i=0;i<0x80000;i++) { + outb(value, 0x80); + } +#endif +} +#endif + +#include "southbridge/intel/i82801er/i82801er_early_smbus.c" +#include "northbridge/intel/e7501/raminit.h" + +#if CONFIG_USE_INIT == 0 +#include "lib/memcpy.c" +#endif + +#include "cpu/x86/lapic/boot_cpu.c" +#include "northbridge/intel/e7501/debug.c" +#include "superio/winbond/w83627hf/w83627hf_early_serial.c" + +#include "cpu/x86/mtrr/earlymtrr.c" +#include "cpu/x86/bist.h" + +#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) + +static void hard_reset(void) +{ + /* full reset */ + outb(0x0a, 0x0cf9); + outb(0x0e, 0x0cf9); +} + +static void soft_reset(void) +{ +#if 1 + /* link reset */ + outb(0x02, 0x0cf9); + outb(0x06, 0x0cf9); +#endif +} + +static void memreset_setup(void) +{ +} + +static void memreset(int controllers, const struct mem_controller *ctrl) +{ +} + +static inline void activate_spd_rom(const struct mem_controller *ctrl) +{ + /* nothing to do */ +} + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + + +#include "northbridge/intel/e7501/raminit.c" +#include "northbridge/intel/e7501/reset_test.c" +#include "sdram/generic_sdram.c" + + +#include "cpu/intel/car/copy_and_run.c" + +#if USE_FALLBACK_IMAGE == 1 + +#include "southbridge/intel/i82801er/cmos_failover.c" + +void real_main(unsigned long bist); + +void amd64_main(unsigned long bist) +{ +#if 1 +#if 0 + unsigned cmos_result; + int i; + for(i=0;i<2;i++) { + cmos_result = cmos_read(0x10); + outb(cmos_result, 0x80); + } +#endif +__asm__ volatile ( + "movl $(DCACHE_RAM_BASE+DCACHE_RAM_SIZE-4), %esi\n\t" +// "movl $(DCACHE_RAM_SIZE>>2), %ecx\n\t" + "movl $8, %ecx\n\t" +".yin1x:\n\t" + "movl %esi, %eax\n\t" + + "movl $0x2000, %edx\n\t" + "movb %ah, %al\n\t" +".testy1:\n\t" + "outb %al, $0x80\n\t" + "decl %edx\n\t" + "jnz .testy1\n\t" + + "movl (%esi), %eax\n\t" + "cmpb 0xff, %al\n\t" + "je .yin2\n\t" + + "movl $0x2000, %edx\n\t" +".testy2:\n\t" + "outb %al, $0x80\n\t" + "decl %edx\n\t" + "jnz .testy2\n\t" + +".yin2: decl %ecx\n\t" + "je .yout1x\n\t" + "sub $4, %esi\n\t" + "jmp .yin1x\n\t" +".yout1x:\n\t" +); +#endif + /* Is this a deliberate reset by the bios */ +// post_code(0x22); + if (bios_reset_detected() && last_boot_normal()) { + goto normal_image; + } + /* This is the primary cpu how should I boot? */ + else { + check_cmos_failed(); + if (do_normal_boot()) { + goto normal_image; + } + else { + goto fallback_image; + } + } + normal_image: +// post_code(0x23); + __asm__ volatile ("jmp __normal_image" + : /* outputs */ + : "a" (bist) /* inputs */ + ); + cpu_reset: +// post_code(0x24); +#if 0 + //CPU reset will reset memtroller ??? + asm volatile ("jmp __cpu_reset" + : /* outputs */ + : "a"(bist) /* inputs */ + ); +#endif + + fallback_image: +// post_code(0x25); + real_main(bist); +} +void real_main(unsigned long bist) +#else +void amd64_main(unsigned long bist) +#endif +{ + static const struct mem_controller memctrl[] = { + { + .d0 = PCI_DEV(0, 0, 0), + .d0f1 = PCI_DEV(0, 0, 1), + .channel0 = { (0xa<<3)|0, (0xa<<3)|1, (0xa<<3)|2, 0 }, + .channel1 = { (0xa<<3)|4, (0xa<<3)|5, (0xa<<3)|6, 0 }, + }, + }; + + unsigned cpu_reset = 0; +#if 1 +__asm__ volatile ( + "movl $(DCACHE_RAM_BASE+DCACHE_RAM_SIZE-4), %esi\n\t" +// "movl $(DCACHE_RAM_SIZE>>2), %ecx\n\t" + "movl $8, %ecx\n\t" +".zin1x:\n\t" + "movl %esi, %eax\n\t" + + "movl $0x2000, %edx\n\t" + "movb %ah, %al\n\t" +".testz1:\n\t" + "outb %al, $0x80\n\t" + "decl %edx\n\t" + "jnz .testz1\n\t" + + "movl (%esi), %eax\n\t" + "cmpb 0xff, %al\n\t" + "je .zin2\n\t" + + "movl $0x2000, %edx\n\t" +".testz2:\n\t" + "outb %al, $0x80\n\t" + "decl %edx\n\t" + "jnz .testz2\n\t" + +".zin2: decl %ecx\n\t" + "je .zout1x\n\t" + "sub $4, %esi\n\t" + "jmp .zin1x\n\t" +".zout1x:\n\t" +); +#endif + + if (bist == 0) + { +// early_mtrr_init(); + enable_lapic(); + + } + +// post_code(0x32); + + w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); + uart_init(); + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + +// setup_s2735_resource_map(); + + if(bios_reset_detected()) { + cpu_reset = 1; + goto cpu_reset_x; + } + + enable_smbus(); +#if 0 + dump_spd_registers(&memctrl[0]); +#endif +#if 0 + dump_smbus_registers(); +#endif + + memreset_setup(); + sdram_initialize(1, memctrl); + +#if 0 + dump_pci_devices(); +#endif + +#if 1 + dump_pci_device(PCI_DEV(0, 0, 0)); +#endif + + +#if 1 + { + /* Check value of esp to verify if we have enough rom for stack in Cache as RAM */ + unsigned v_esp; + __asm__ volatile ( + "movl %%esp, %0\n\t" + : "=a" (v_esp) + ); +#if CONFIG_USE_INIT + printk_debug("v_esp=%08x\r\n", v_esp); +#else + print_debug("v_esp="); print_debug_hex32(v_esp); print_debug("\r\n"); +#endif + } + +#endif +#if 1 + +cpu_reset_x: + +#if CONFIG_USE_INIT + printk_debug("cpu_reset = %08x\r\n",cpu_reset); +#else + print_debug("cpu_reset = "); print_debug_hex32(cpu_reset); print_debug("\r\n"); +#endif + + if(cpu_reset == 0) { + print_debug("Clearing initial memory region: "); + } + print_debug("No cache as ram now - "); + + /* store cpu_reset to ebx */ + __asm__ volatile ( + "movl %0, %%ebx\n\t" + ::"a" (cpu_reset) + ); + + if(cpu_reset==0) { +#define CLEAR_FIRST_1M_RAM 1 +#include "cpu/intel/car/cache_as_ram_post.c" + } + else { +#undef CLEAR_FIRST_1M_RAM +#include "cpu/intel/car/cache_as_ram_post.c" + } + + __asm__ volatile ( + /* set new esp */ /* before _RAMBASE */ + "movl %0, %%ebp\n\t" + "movl %0, %%esp\n\t" + ::"a"( _RAMBASE - 4 ) + ); + + { + unsigned new_cpu_reset; + + /* get back cpu_reset from ebx */ + __asm__ volatile ( + "movl %%ebx, %0\n\t" + :"=a" (new_cpu_reset) + ); + + /* We can not go back any more, we lost old stack data in cache as ram*/ + if(new_cpu_reset==0) { + print_debug("Use Ram as Stack now - done\r\n"); + } else + { + print_debug("Use Ram as Stack now - \r\n"); + } +#if CONFIG_USE_INIT + printk_debug("new_cpu_reset = %08x\r\n", new_cpu_reset); +#else + print_debug("new_cpu_reset = "); print_debug_hex32(new_cpu_reset); print_debug("\r\n"); +#endif + + /*copy and execute linuxbios_ram */ + copy_and_run(new_cpu_reset); + /* We will not return */ + } +#endif + + + print_debug("should not be here -\r\n"); + +} diff --git a/src/mainboard/tyan/s2850/Options.lb b/src/mainboard/tyan/s2850/Options.lb index c829098721..c9b56b2811 100644 --- a/src/mainboard/tyan/s2850/Options.lb +++ b/src/mainboard/tyan/s2850/Options.lb @@ -57,6 +57,8 @@ uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN uses K8_E0_MEM_HOLE_SIZEK +uses CONFIG_USE_INIT + ### ### Build options ### @@ -139,8 +141,8 @@ default CONFIG_IOAPIC=1 ## ## Clean up the motherboard id strings ## -default MAINBOARD_PART_NUMBER="Tyan" -default MAINBOARD_VENDOR="s2850" +default MAINBOARD_PART_NUMBER="s2850" +default MAINBOARD_VENDOR="Tyan" default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2850 diff --git a/src/mainboard/tyan/s2875/Options.lb b/src/mainboard/tyan/s2875/Options.lb index d1e22c0063..5851318be6 100644 --- a/src/mainboard/tyan/s2875/Options.lb +++ b/src/mainboard/tyan/s2875/Options.lb @@ -56,6 +56,8 @@ uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN uses K8_E0_MEM_HOLE_SIZEK +uses CONFIG_USE_INIT + ### ### Build options ### @@ -124,8 +126,8 @@ default CONFIG_LOGICAL_CPUS=0 default K8_E0_MEM_HOLE_SIZEK=0x100000 #VGA Console -default CONFIG_CONSOLE_VGA=1 -default CONFIG_PCI_ROM_RUN=1 +#default CONFIG_CONSOLE_VGA=1 +#default CONFIG_PCI_ROM_RUN=1 ## ## Build code to setup a generic IOAPIC @@ -135,8 +137,8 @@ default CONFIG_IOAPIC=1 ## ## Clean up the motherboard id strings ## -default MAINBOARD_PART_NUMBER="Tyan" -default MAINBOARD_VENDOR="s2875" +default MAINBOARD_PART_NUMBER="s2875" +default MAINBOARD_VENDOR="Tyan" default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2875 diff --git a/src/mainboard/tyan/s2880/Options.lb b/src/mainboard/tyan/s2880/Options.lb index af9aea7b36..a6b4e86f50 100644 --- a/src/mainboard/tyan/s2880/Options.lb +++ b/src/mainboard/tyan/s2880/Options.lb @@ -56,6 +56,8 @@ uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN uses K8_E0_MEM_HOLE_SIZEK +uses CONFIG_USE_INIT + ### ### Build options ### @@ -135,8 +137,8 @@ default CONFIG_IOAPIC=1 ## ## Clean up the motherboard id strings ## -default MAINBOARD_PART_NUMBER="Tyan" -default MAINBOARD_VENDOR="s2880" +default MAINBOARD_PART_NUMBER="s2880" +default MAINBOARD_VENDOR="Tyan" default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2880 diff --git a/src/mainboard/tyan/s2881/Config.lb b/src/mainboard/tyan/s2881/Config.lb index 47ab2df45a..2e564ce9ea 100644 --- a/src/mainboard/tyan/s2881/Config.lb +++ b/src/mainboard/tyan/s2881/Config.lb @@ -39,10 +39,33 @@ arch i386 end ## driver mainboard.o + +#dir /drivers/si/3114 + if HAVE_MP_TABLE object mptable.o end if HAVE_PIRQ_TABLE object irq_tables.o end #object reset.o +if USE_DCACHE_RAM + +if CONFIG_USE_INIT + +makerule ./auto.o + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o auto.o" +end + +else + +makerule ./auto.inc + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@" + action "perl -e 's/.rodata/.rom.data/g' -pi $@" + action "perl -e 's/.text/.section .rom.text/g' -pi $@" +end + +end +else ## ## Romcc output @@ -66,13 +89,22 @@ makerule ./auto.inc action "./romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" end +end ## ## Build our 16 bit and 32 bit linuxBIOS entry code ## mainboardinit cpu/x86/16bit/entry16.inc mainboardinit cpu/x86/32bit/entry32.inc ldscript /cpu/x86/16bit/entry16.lds -ldscript /cpu/x86/32bit/entry32.lds +if USE_DCACHE_RAM + if CONFIG_USE_INIT + ldscript /cpu/x86/32bit/entry32.lds + end + + if CONFIG_USE_INIT + ldscript /cpu/amd/car/cache_as_ram.lds + end +end ## ## Build our reset vector (This is where linuxBIOS is entered) @@ -85,8 +117,11 @@ else ldscript /cpu/x86/32bit/reset32.lds end +if USE_DCACHE_RAM +else ### Should this be in the northbridge code? mainboardinit arch/i386/lib/cpu_reset.inc +end ## ## Include an id string (For safe flashing) @@ -94,14 +129,25 @@ mainboardinit arch/i386/lib/cpu_reset.inc mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds +if USE_DCACHE_RAM +## +## Setup Cache-As-Ram +## +mainboardinit cpu/amd/car/cache_as_ram.inc +end + ### ### This is the early phase of linuxBIOS startup ### Things are delicate and we test to see if we should ### failover to another image. ### if USE_FALLBACK_IMAGE - ldscript /arch/i386/lib/failover.lds - mainboardinit ./failover.inc +if USE_DCACHE_RAM + ldscript /arch/i386/lib/failover.lds +else + ldscript /arch/i386/lib/failover.lds + mainboardinit ./failover.inc +end end ### @@ -111,6 +157,19 @@ end ## ## Setup RAM ## +if USE_DCACHE_RAM + +if CONFIG_USE_INIT +initobject auto.o +else +mainboardinit ./auto.inc +end + +else + +## +## Setup RAM +## mainboardinit cpu/x86/fpu/enable_fpu.inc mainboardinit cpu/x86/mmx/enable_mmx.inc mainboardinit cpu/x86/sse/enable_sse.inc @@ -118,11 +177,13 @@ mainboardinit ./auto.inc mainboardinit cpu/x86/sse/disable_sse.inc mainboardinit cpu/x86/mmx/disable_mmx.inc +end + ## ## Include the secondary Configuration files ## if CONFIG_CHIP_NAME - config chip.h + config chip.h end # sample config for tyan/s2881 diff --git a/src/mainboard/tyan/s2881/Options.lb b/src/mainboard/tyan/s2881/Options.lb index 53ae8db518..84fa34e568 100644 --- a/src/mainboard/tyan/s2881/Options.lb +++ b/src/mainboard/tyan/s2881/Options.lb @@ -47,6 +47,7 @@ uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL uses CONFIG_CONSOLE_SERIAL8250 uses HAVE_INIT_TIMER uses CONFIG_GDB_STUB +uses CONFIG_GDB_STUB uses CROSS_COMPILE uses CC uses HOSTCC @@ -56,6 +57,11 @@ uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN uses K8_E0_MEM_HOLE_SIZEK +uses USE_DCACHE_RAM +uses DCACHE_RAM_BASE +uses DCACHE_RAM_SIZE +uses CONFIG_USE_INIT + ### ### Build options ### @@ -120,6 +126,9 @@ default CONFIG_MAX_CPUS=4 default CONFIG_MAX_PHYSICAL_CPUS=2 default CONFIG_LOGICAL_CPUS=1 +#CHIP_NAME ? +default CONFIG_CHIP_NAME=1 + #1G memory hole default K8_E0_MEM_HOLE_SIZEK=0x100000 @@ -127,6 +136,15 @@ default K8_E0_MEM_HOLE_SIZEK=0x100000 default CONFIG_CONSOLE_VGA=1 default CONFIG_PCI_ROM_RUN=1 + +## +## enable CACHE_AS_RAM specifics +## +default USE_DCACHE_RAM=1 +default DCACHE_RAM_BASE=0xcf000 +default DCACHE_RAM_SIZE=0x1000 +default CONFIG_USE_INIT=1 + ## ## Build code to setup a generic IOAPIC ## @@ -135,8 +153,8 @@ default CONFIG_IOAPIC=1 ## ## Clean up the motherboard id strings ## -default MAINBOARD_PART_NUMBER="Tyan" -default MAINBOARD_VENDOR="s2881" +default MAINBOARD_PART_NUMBER="s2881" +default MAINBOARD_VENDOR="Tyan" default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2881 diff --git a/src/mainboard/tyan/s2881/cache_as_ram_auto.c b/src/mainboard/tyan/s2881/cache_as_ram_auto.c new file mode 100644 index 0000000000..b1e3719c72 --- /dev/null +++ b/src/mainboard/tyan/s2881/cache_as_ram_auto.c @@ -0,0 +1,393 @@ +#define ASSEMBLY 1 +#define __ROMCC__ + +#include <stdint.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/romcc_io.h> +#include <cpu/x86/lapic.h> +#include "option_table.h" +#include "pc80/mc146818rtc_early.c" +#include "pc80/serial.c" +#include "arch/i386/lib/console.c" +#include "ram/ramtest.c" + +#include "northbridge/amd/amdk8/cpu_rev.c" +#define K8_HT_FREQ_1G_SUPPORT 0 +#include "northbridge/amd/amdk8/incoherent_ht.c" +#include "southbridge/amd/amd8111/amd8111_early_smbus.c" +#include "northbridge/amd/amdk8/raminit.h" +#include "cpu/amd/model_fxx/apic_timer.c" +#include "lib/delay.c" + +#if CONFIG_USE_INIT == 0 +#include "lib/memcpy.c" +#endif + +#include "cpu/x86/lapic/boot_cpu.c" +#include "northbridge/amd/amdk8/reset_test.c" +#include "northbridge/amd/amdk8/debug.c" +#include "superio/winbond/w83627hf/w83627hf_early_serial.c" + +#include "cpu/amd/mtrr/amd_earlymtrr.c" +#include "cpu/x86/bist.h" + +#include "northbridge/amd/amdk8/setup_resource_map.c" + +#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) + +static void hard_reset(void) +{ + set_bios_reset(); + + /* enable cf9 */ + pci_write_config8(PCI_DEV(0, 0x04, 3), 0x41, 0xf1); + /* reset */ + outb(0x0e, 0x0cf9); +} + +static void soft_reset(void) +{ + set_bios_reset(); + pci_write_config8(PCI_DEV(0, 0x04, 0), 0x47, 1); +} + +static void memreset_setup(void) +{ + if (is_cpu_pre_c0()) { + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0 + } + else { + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1 + } + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17); +} + +static void memreset(int controllers, const struct mem_controller *ctrl) +{ + if (is_cpu_pre_c0()) { + udelay(800); + outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1 + udelay(90); + } +} + +static inline void activate_spd_rom(const struct mem_controller *ctrl) +{ + /* nothing to do */ +} + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#define K8_4RANK_DIMM_SUPPORT 1 + +#include "northbridge/amd/amdk8/raminit.c" +#include "resourcemap.c" +#include "northbridge/amd/amdk8/coherent_ht.c" +#include "sdram/generic_sdram.c" + +#if CONFIG_LOGICAL_CPUS==1 +#define SET_NB_CFG_54 1 +#include "cpu/amd/dualcore/dualcore.c" +#endif + +#define FIRST_CPU 1 +#define SECOND_CPU 1 +#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU) + +#include "cpu/amd/car/copy_and_run.c" + +#if USE_FALLBACK_IMAGE == 1 + +#include "southbridge/amd/amd8111/amd8111_enable_rom.c" +#include "northbridge/amd/amdk8/early_ht.c" + +void real_main(unsigned long bist); + +void amd64_main(unsigned long bist) +{ +#if CONFIG_LOGICAL_CPUS==1 + struct node_core_id id; +#else + unsigned nodeid; +#endif + /* Make cerain my local apic is useable */ +// enable_lapic(); + +#if CONFIG_LOGICAL_CPUS==1 + id = get_node_core_id_x(); + /* Is this a cpu only reset? */ + if (cpu_init_detected(id.nodeid)) { +#else +// nodeid = lapicid(); + nodeid = get_node_id(); + /* Is this a cpu only reset? */ + if (cpu_init_detected(nodeid)) { +#endif + if (last_boot_normal()) { + goto normal_image; + } else { + goto cpu_reset; + } + } + + /* Is this a secondary cpu? */ +// post_code(0x21); + if (!boot_cpu()) { + if (last_boot_normal()) { + goto normal_image; + } else { + goto fallback_image; + } + } + + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + enumerate_ht_chain(); + + /* Setup the ck804 */ + amd8111_enable_rom(); + + /* Is this a deliberate reset by the bios */ +// post_code(0x22); + if (bios_reset_detected() && last_boot_normal()) { + goto normal_image; + } + /* This is the primary cpu how should I boot? */ + else if (do_normal_boot()) { + goto normal_image; + } + else { + goto fallback_image; + } + normal_image: +// post_code(0x23); + __asm__ volatile ("jmp __normal_image" + : /* outputs */ + : "a" (bist) /* inputs */ + ); + cpu_reset: +// post_code(0x24); +#if 0 + //CPU reset will reset memtroller ??? + asm volatile ("jmp __cpu_reset" + : /* outputs */ + : "a"(bist) /* inputs */ + ); +#endif + + fallback_image: +// post_code(0x25); + real_main(bist); +} +void real_main(unsigned long bist) +#else +void amd64_main(unsigned long bist) +#endif +{ + static const struct mem_controller cpu[] = { +#if FIRST_CPU + { + .node_id = 0, + .f0 = PCI_DEV(0, 0x18, 0), + .f1 = PCI_DEV(0, 0x18, 1), + .f2 = PCI_DEV(0, 0x18, 2), + .f3 = PCI_DEV(0, 0x18, 3), + .channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 }, + .channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 }, + }, +#endif +#if SECOND_CPU + { + .node_id = 1, + .f0 = PCI_DEV(0, 0x19, 0), + .f1 = PCI_DEV(0, 0x19, 1), + .f2 = PCI_DEV(0, 0x19, 2), + .f3 = PCI_DEV(0, 0x19, 3), + .channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 }, + .channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 }, + }, +#endif + }; + + int needs_reset; + unsigned cpu_reset = 0; + + if (bist == 0) { +#if CONFIG_LOGICAL_CPUS==1 + struct node_core_id id; +#else + unsigned nodeid; +#endif + /* Skip this if there was a built in self test failure */ +// amd_early_mtrr_init(); # don't need, already done in cache_as_ram + +#if CONFIG_LOGICAL_CPUS==1 + set_apicid_cpuid_lo(); + id = get_node_core_id_x(); // that is initid +#else + nodeid = get_node_id(); +#endif + + enable_lapic(); + init_timer(); + + +#if CONFIG_LOGICAL_CPUS==1 + if(id.coreid == 0) { + if (cpu_init_detected(id.nodeid)) { + cpu_reset = 1; + goto cpu_reset_x; + } + distinguish_cpu_resets(id.nodeid); + } +#else + if (cpu_init_detected(nodeid)) { + cpu_reset = 1; + goto cpu_reset_x; + } + distinguish_cpu_resets(nodeid); +#endif + + + if (!boot_cpu() +#if CONFIG_LOGICAL_CPUS==1 + || (id.coreid != 0) +#endif + ) { + // We need stop the CACHE as RAM for this CPU too + #include "cpu/amd/car/cache_as_ram_post.c" + stop_this_cpu(); // it will stop all cores except core0 of cpu0 + } + } + + + w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); + uart_init(); + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + setup_s2881_resource_map(); +#if 0 + dump_pci_device(PCI_DEV(0, 0x18, 0)); + dump_pci_device(PCI_DEV(0, 0x19, 0)); +#endif + + needs_reset = setup_coherent_ht_domain(); + +#if CONFIG_LOGICAL_CPUS==1 + start_other_cores(); +#endif + + needs_reset |= ht_setup_chains_x(); + + if (needs_reset) { + print_info("ht reset -\r\n"); + soft_reset(); + } + + enable_smbus(); +#if 0 + dump_spd_registers(&cpu[0]); +#endif +#if 0 + dump_smbus_registers(); +#endif + + memreset_setup(); + sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu); + +#if 0 + dump_pci_devices(); +#endif + +#if 1 + { + /* Check value of esp to verify if we have enough rom for stack in Cache as RAM */ + unsigned v_esp; + __asm__ volatile ( + "movl %%esp, %0\n\t" + : "=a" (v_esp) + ); +#if CONFIG_USE_INIT + printk_debug("v_esp=%08x\r\n", v_esp); +#else + print_debug("v_esp="); print_debug_hex32(v_esp); print_debug("\r\n"); +#endif + } +#endif + + +cpu_reset_x: + +#if CONFIG_USE_INIT + printk_debug("cpu_reset = %08x\r\n",cpu_reset); +#else + print_debug("cpu_reset = "); print_debug_hex32(cpu_reset); print_debug("\r\n"); +#endif + + if(cpu_reset == 0) { + print_debug("Clearing initial memory region: "); + } + print_debug("No cache as ram now - "); + + /* store cpu_reset to ebx */ + __asm__ volatile ( + "movl %0, %%ebx\n\t" + ::"a" (cpu_reset) + ); + + if(cpu_reset==0) { +#define CLEAR_FIRST_1M_RAM 1 +#include "cpu/amd/car/cache_as_ram_post.c" + } + else { +#undef CLEAR_FIRST_1M_RAM +#include "cpu/amd/car/cache_as_ram_post.c" + } + + __asm__ volatile ( + /* set new esp */ /* before _RAMBASE */ + "movl %0, %%ebp\n\t" + "movl %0, %%esp\n\t" + ::"a"( _RAMBASE - 4 ) + ); + + { + unsigned new_cpu_reset; + + /* get back cpu_reset from ebx */ + __asm__ volatile ( + "movl %%ebx, %0\n\t" + :"=a" (new_cpu_reset) + ); + + print_debug("Use Ram as Stack now - "); /* but We can not go back any more, we lost old stack data in cache as ram*/ + if(new_cpu_reset==0) { + print_debug("done\r\n"); + } else + { + print_debug("\r\n"); + } + +#if CONFIG_USE_INIT + printk_debug("new_cpu_reset = %08x\r\n", new_cpu_reset); +#else + print_debug("new_cpu_reset = "); print_debug_hex32(new_cpu_reset); print_debug("\r\n"); +#endif + /*copy and execute linuxbios_ram */ + copy_and_run(new_cpu_reset); + /* We will not return */ + } + + + print_debug("should not be here -\r\n"); + +} diff --git a/src/mainboard/tyan/s2882/Config.lb b/src/mainboard/tyan/s2882/Config.lb index e708936f46..7739a67ca6 100644 --- a/src/mainboard/tyan/s2882/Config.lb +++ b/src/mainboard/tyan/s2882/Config.lb @@ -39,10 +39,34 @@ arch i386 end ## driver mainboard.o + +#dir /drivers/si/3114 + if HAVE_MP_TABLE object mptable.o end if HAVE_PIRQ_TABLE object irq_tables.o end #object reset.o +if USE_DCACHE_RAM + +if CONFIG_USE_INIT + +makerule ./auto.o + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o auto.o" +end + +else + +makerule ./auto.inc + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@" + action "perl -e 's/.rodata/.rom.data/g' -pi $@" + action "perl -e 's/.text/.section .rom.text/g' -pi $@" +end + +end +else + ## ## Romcc output ## @@ -65,13 +89,22 @@ makerule ./auto.inc action "./romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" end +end ## ## Build our 16 bit and 32 bit linuxBIOS entry code ## mainboardinit cpu/x86/16bit/entry16.inc mainboardinit cpu/x86/32bit/entry32.inc ldscript /cpu/x86/16bit/entry16.lds -ldscript /cpu/x86/32bit/entry32.lds +if USE_DCACHE_RAM + if CONFIG_USE_INIT + ldscript /cpu/x86/32bit/entry32.lds + end + + if CONFIG_USE_INIT + ldscript /cpu/amd/car/cache_as_ram.lds + end +end ## ## Build our reset vector (This is where linuxBIOS is entered) @@ -84,8 +117,11 @@ else ldscript /cpu/x86/32bit/reset32.lds end +if USE_DCACHE_RAM +else ### Should this be in the northbridge code? mainboardinit arch/i386/lib/cpu_reset.inc +end ## ## Include an id string (For safe flashing) @@ -93,14 +129,25 @@ mainboardinit arch/i386/lib/cpu_reset.inc mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds +if USE_DCACHE_RAM +## +## Setup Cache-As-Ram +## +mainboardinit cpu/amd/car/cache_as_ram.inc +end + ### ### This is the early phase of linuxBIOS startup ### Things are delicate and we test to see if we should ### failover to another image. ### if USE_FALLBACK_IMAGE - ldscript /arch/i386/lib/failover.lds - mainboardinit ./failover.inc +if USE_DCACHE_RAM + ldscript /arch/i386/lib/failover.lds +else + ldscript /arch/i386/lib/failover.lds + mainboardinit ./failover.inc +end end ### @@ -110,6 +157,19 @@ end ## ## Setup RAM ## +if USE_DCACHE_RAM + +if CONFIG_USE_INIT +initobject auto.o +else +mainboardinit ./auto.inc +end + +else + +## +## Setup RAM +## mainboardinit cpu/x86/fpu/enable_fpu.inc mainboardinit cpu/x86/mmx/enable_mmx.inc mainboardinit cpu/x86/sse/enable_sse.inc @@ -117,11 +177,13 @@ mainboardinit ./auto.inc mainboardinit cpu/x86/sse/disable_sse.inc mainboardinit cpu/x86/mmx/disable_mmx.inc +end + ## ## Include the secondary Configuration files ## if CONFIG_CHIP_NAME - config chip.h + config chip.h end # sample config for tyan/s2882 diff --git a/src/mainboard/tyan/s2882/Options.lb b/src/mainboard/tyan/s2882/Options.lb index 4f084c86ba..1249719210 100644 --- a/src/mainboard/tyan/s2882/Options.lb +++ b/src/mainboard/tyan/s2882/Options.lb @@ -47,6 +47,7 @@ uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL uses CONFIG_CONSOLE_SERIAL8250 uses HAVE_INIT_TIMER uses CONFIG_GDB_STUB +uses CONFIG_GDB_STUB uses CROSS_COMPILE uses CC uses HOSTCC @@ -56,6 +57,11 @@ uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN uses K8_E0_MEM_HOLE_SIZEK +uses USE_DCACHE_RAM +uses DCACHE_RAM_BASE +uses DCACHE_RAM_SIZE +uses CONFIG_USE_INIT + ### ### Build options ### @@ -120,6 +126,9 @@ default CONFIG_MAX_CPUS=4 default CONFIG_MAX_PHYSICAL_CPUS=2 default CONFIG_LOGICAL_CPUS=1 +#CHIP_NAME ? +default CONFIG_CHIP_NAME=1 + #1G memory hole default K8_E0_MEM_HOLE_SIZEK=0x100000 @@ -127,6 +136,15 @@ default K8_E0_MEM_HOLE_SIZEK=0x100000 default CONFIG_CONSOLE_VGA=1 default CONFIG_PCI_ROM_RUN=1 + +## +## enable CACHE_AS_RAM specifics +## +default USE_DCACHE_RAM=1 +default DCACHE_RAM_BASE=0xcf000 +default DCACHE_RAM_SIZE=0x1000 +default CONFIG_USE_INIT=1 + ## ## Build code to setup a generic IOAPIC ## @@ -135,8 +153,8 @@ default CONFIG_IOAPIC=1 ## ## Clean up the motherboard id strings ## -default MAINBOARD_PART_NUMBER="Tyan" -default MAINBOARD_VENDOR="s2882" +default MAINBOARD_PART_NUMBER="s2882" +default MAINBOARD_VENDOR="Tyan" default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2882 diff --git a/src/mainboard/tyan/s2882/cache_as_ram_auto.c b/src/mainboard/tyan/s2882/cache_as_ram_auto.c new file mode 100644 index 0000000000..5c92e8420c --- /dev/null +++ b/src/mainboard/tyan/s2882/cache_as_ram_auto.c @@ -0,0 +1,389 @@ +#define ASSEMBLY 1 +#define __ROMCC__ + +#include <stdint.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/romcc_io.h> +#include <cpu/x86/lapic.h> +#include "option_table.h" +#include "pc80/mc146818rtc_early.c" +#include "pc80/serial.c" +#include "arch/i386/lib/console.c" +#include "ram/ramtest.c" + +#include "northbridge/amd/amdk8/cpu_rev.c" +#define K8_HT_FREQ_1G_SUPPORT 0 +#include "northbridge/amd/amdk8/incoherent_ht.c" +#include "southbridge/amd/amd8111/amd8111_early_smbus.c" +#include "northbridge/amd/amdk8/raminit.h" +#include "cpu/amd/model_fxx/apic_timer.c" +#include "lib/delay.c" + +#if CONFIG_USE_INIT == 0 +#include "lib/memcpy.c" +#endif + +#include "cpu/x86/lapic/boot_cpu.c" +#include "northbridge/amd/amdk8/reset_test.c" +#include "northbridge/amd/amdk8/debug.c" +#include "superio/winbond/w83627hf/w83627hf_early_serial.c" + +#include "cpu/amd/mtrr/amd_earlymtrr.c" +#include "cpu/x86/bist.h" + +#include "northbridge/amd/amdk8/setup_resource_map.c" + +#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) + +static void hard_reset(void) +{ + set_bios_reset(); + + /* enable cf9 */ + pci_write_config8(PCI_DEV(0, 0x04, 3), 0x41, 0xf1); + /* reset */ + outb(0x0e, 0x0cf9); +} + +static void soft_reset(void) +{ + set_bios_reset(); + pci_write_config8(PCI_DEV(0, 0x04, 0), 0x47, 1); +} + +static void memreset_setup(void) +{ + if (is_cpu_pre_c0()) { + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0 + } + else { + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1 + } + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17); +} + +static void memreset(int controllers, const struct mem_controller *ctrl) +{ + if (is_cpu_pre_c0()) { + udelay(800); + outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1 + udelay(90); + } +} + +static inline void activate_spd_rom(const struct mem_controller *ctrl) +{ + /* nothing to do */ +} + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#define K8_4RANK_DIMM_SUPPORT 1 + +#include "northbridge/amd/amdk8/raminit.c" +#include "northbridge/amd/amdk8/resourcemap.c" +#include "northbridge/amd/amdk8/coherent_ht.c" +#include "sdram/generic_sdram.c" + +#if CONFIG_LOGICAL_CPUS==1 +#define SET_NB_CFG_54 1 +#include "cpu/amd/dualcore/dualcore.c" +#endif + +#define FIRST_CPU 1 +#define SECOND_CPU 1 +#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU) + +#include "cpu/amd/car/copy_and_run.c" + +#if USE_FALLBACK_IMAGE == 1 + +#include "southbridge/amd/amd8111/amd8111_enable_rom.c" +#include "northbridge/amd/amdk8/early_ht.c" + +void real_main(unsigned long bist); + +void amd64_main(unsigned long bist) +{ +#if CONFIG_LOGICAL_CPUS==1 + struct node_core_id id; +#else + unsigned nodeid; +#endif + /* Make cerain my local apic is useable */ +// enable_lapic(); + +#if CONFIG_LOGICAL_CPUS==1 + id = get_node_core_id_x(); + /* Is this a cpu only reset? */ + if (cpu_init_detected(id.nodeid)) { +#else +// nodeid = lapicid(); + nodeid = get_node_id(); + /* Is this a cpu only reset? */ + if (cpu_init_detected(nodeid)) { +#endif + if (last_boot_normal()) { + goto normal_image; + } else { + goto cpu_reset; + } + } + + /* Is this a secondary cpu? */ + if (!boot_cpu()) { + if (last_boot_normal()) { + goto normal_image; + } else { + goto fallback_image; + } + } + + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + enumerate_ht_chain(); + + /* Setup the ck804 */ + amd8111_enable_rom(); + + /* Is this a deliberate reset by the bios */ + if (bios_reset_detected() && last_boot_normal()) { + goto normal_image; + } + /* This is the primary cpu how should I boot? */ + else if (do_normal_boot()) { + goto normal_image; + } + else { + goto fallback_image; + } + normal_image: + __asm__ volatile ("jmp __normal_image" + : /* outputs */ + : "a" (bist) /* inputs */ + ); + cpu_reset: +#if 0 + //CPU reset will reset memtroller ??? + asm volatile ("jmp __cpu_reset" + : /* outputs */ + : "a"(bist) /* inputs */ + ); +#endif + + fallback_image: + real_main(bist); +} +void real_main(unsigned long bist) +#else +void amd64_main(unsigned long bist) +#endif +{ + static const struct mem_controller cpu[] = { +#if FIRST_CPU + { + .node_id = 0, + .f0 = PCI_DEV(0, 0x18, 0), + .f1 = PCI_DEV(0, 0x18, 1), + .f2 = PCI_DEV(0, 0x18, 2), + .f3 = PCI_DEV(0, 0x18, 3), + .channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 }, + .channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 }, + }, +#endif +#if SECOND_CPU + { + .node_id = 1, + .f0 = PCI_DEV(0, 0x19, 0), + .f1 = PCI_DEV(0, 0x19, 1), + .f2 = PCI_DEV(0, 0x19, 2), + .f3 = PCI_DEV(0, 0x19, 3), + .channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 }, + .channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 }, + }, +#endif + }; + + int needs_reset; + unsigned cpu_reset = 0; + + if (bist == 0) { +#if CONFIG_LOGICAL_CPUS==1 + struct node_core_id id; +#else + unsigned nodeid; +#endif + /* Skip this if there was a built in self test failure */ +// amd_early_mtrr_init(); # don't need, already done in cache_as_ram + +#if CONFIG_LOGICAL_CPUS==1 + set_apicid_cpuid_lo(); + id = get_node_core_id_x(); // that is initid +#else + nodeid = get_node_id(); +#endif + + enable_lapic(); + init_timer(); + + +#if CONFIG_LOGICAL_CPUS==1 + if(id.coreid == 0) { + if (cpu_init_detected(id.nodeid)) { + cpu_reset = 1; + goto cpu_reset_x; + } + distinguish_cpu_resets(id.nodeid); + } +#else + if (cpu_init_detected(nodeid)) { + cpu_reset = 1; + goto cpu_reset_x; + } + distinguish_cpu_resets(nodeid); +#endif + + + if (!boot_cpu() +#if CONFIG_LOGICAL_CPUS==1 + || (id.coreid != 0) +#endif + ) { + // We need stop the CACHE as RAM for this CPU too + #include "cpu/amd/car/cache_as_ram_post.c" + stop_this_cpu(); // it will stop all cores except core0 of cpu0 + } + } + + + w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); + uart_init(); + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + setup_default_resource_map(); +#if 0 + dump_pci_device(PCI_DEV(0, 0x18, 0)); + dump_pci_device(PCI_DEV(0, 0x19, 0)); +#endif + + needs_reset = setup_coherent_ht_domain(); + +#if CONFIG_LOGICAL_CPUS==1 + start_other_cores(); +#endif + needs_reset |= ht_setup_chains_x(); + + if (needs_reset) { + print_info("ht reset -\r\n"); + soft_reset(); + } + + enable_smbus(); +#if 0 + dump_spd_registers(&cpu[0]); +#endif +#if 0 + dump_smbus_registers(); +#endif + + memreset_setup(); + sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu); + +#if 0 + dump_pci_devices(); +#endif + + +#if 1 + { + /* Check value of esp to verify if we have enough rom for stack in Cache as RAM */ + unsigned v_esp; + __asm__ volatile ( + "movl %%esp, %0\n\t" + : "=a" (v_esp) + ); +#if CONFIG_USE_INIT + printk_debug("v_esp=%08x\r\n", v_esp); +#else + print_debug("v_esp="); print_debug_hex32(v_esp); print_debug("\r\n"); +#endif + } +#endif + + + +cpu_reset_x: + +#if CONFIG_USE_INIT + printk_debug("cpu_reset = %08x\r\n",cpu_reset); +#else + print_debug("cpu_reset = "); print_debug_hex32(cpu_reset); print_debug("\r\n"); +#endif + + if(cpu_reset == 0) { + print_debug("Clearing initial memory region: "); + } + print_debug("No cache as ram now - "); + + /* store cpu_reset to ebx */ + __asm__ volatile ( + "movl %0, %%ebx\n\t" + ::"a" (cpu_reset) + ); + + if(cpu_reset==0) { +#define CLEAR_FIRST_1M_RAM 1 +#include "cpu/amd/car/cache_as_ram_post.c" + } + else { +#undef CLEAR_FIRST_1M_RAM +#include "cpu/amd/car/cache_as_ram_post.c" + } + + __asm__ volatile ( + /* set new esp */ /* before _RAMBASE */ + "movl %0, %%ebp\n\t" + "movl %0, %%esp\n\t" + ::"a"( _RAMBASE - 4 ) + ); + + { + unsigned new_cpu_reset; + + /* get back cpu_reset from ebx */ + __asm__ volatile ( + "movl %%ebx, %0\n\t" + :"=a" (new_cpu_reset) + ); + + print_debug("Use Ram as Stack now - "); /* but We can not go back any more, we lost old stack data in cache as ram*/ + if(new_cpu_reset==0) { + print_debug("done\r\n"); + } else + { + print_debug("\r\n"); + } + +#if CONFIG_USE_INIT + printk_debug("new_cpu_reset = %08x\r\n", new_cpu_reset); +#else + print_debug("new_cpu_reset = "); print_debug_hex32(new_cpu_reset); print_debug("\r\n"); +#endif + /*copy and execute linuxbios_ram */ + copy_and_run(new_cpu_reset); + /* We will not return */ + } + + + print_debug("should not be here -\r\n"); + +} diff --git a/src/mainboard/tyan/s2885/Config.lb b/src/mainboard/tyan/s2885/Config.lb index f7374c24a7..a29c713ac6 100644 --- a/src/mainboard/tyan/s2885/Config.lb +++ b/src/mainboard/tyan/s2885/Config.lb @@ -46,6 +46,26 @@ if HAVE_MP_TABLE object mptable.o end if HAVE_PIRQ_TABLE object irq_tables.o end #object reset.o +if USE_DCACHE_RAM + +if CONFIG_USE_INIT + +makerule ./auto.o + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o auto.o" +end + +else + +makerule ./auto.inc + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@" + action "perl -e 's/.rodata/.rom.data/g' -pi $@" + action "perl -e 's/.text/.section .rom.text/g' -pi $@" +end + +end +else ## ## Romcc output @@ -69,13 +89,22 @@ makerule ./auto.inc action "./romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" end +end ## ## Build our 16 bit and 32 bit linuxBIOS entry code ## mainboardinit cpu/x86/16bit/entry16.inc mainboardinit cpu/x86/32bit/entry32.inc ldscript /cpu/x86/16bit/entry16.lds -ldscript /cpu/x86/32bit/entry32.lds +if USE_DCACHE_RAM + if CONFIG_USE_INIT + ldscript /cpu/x86/32bit/entry32.lds + end + + if CONFIG_USE_INIT + ldscript /cpu/amd/car/cache_as_ram.lds + end +end ## ## Build our reset vector (This is where linuxBIOS is entered) @@ -88,8 +117,11 @@ else ldscript /cpu/x86/32bit/reset32.lds end +if USE_DCACHE_RAM +else ### Should this be in the northbridge code? mainboardinit arch/i386/lib/cpu_reset.inc +end ## ## Include an id string (For safe flashing) @@ -97,14 +129,25 @@ mainboardinit arch/i386/lib/cpu_reset.inc mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds +if USE_DCACHE_RAM +## +## Setup Cache-As-Ram +## +mainboardinit cpu/amd/car/cache_as_ram.inc +end + ### ### This is the early phase of linuxBIOS startup ### Things are delicate and we test to see if we should ### failover to another image. ### if USE_FALLBACK_IMAGE - ldscript /arch/i386/lib/failover.lds - mainboardinit ./failover.inc +if USE_DCACHE_RAM + ldscript /arch/i386/lib/failover.lds +else + ldscript /arch/i386/lib/failover.lds + mainboardinit ./failover.inc +end end ### @@ -114,6 +157,19 @@ end ## ## Setup RAM ## +if USE_DCACHE_RAM + +if CONFIG_USE_INIT +initobject auto.o +else +mainboardinit ./auto.inc +end + +else + +## +## Setup RAM +## mainboardinit cpu/x86/fpu/enable_fpu.inc mainboardinit cpu/x86/mmx/enable_mmx.inc mainboardinit cpu/x86/sse/enable_sse.inc @@ -121,6 +177,8 @@ mainboardinit ./auto.inc mainboardinit cpu/x86/sse/disable_sse.inc mainboardinit cpu/x86/mmx/disable_mmx.inc +end + ## ## Include the secondary Configuration files ## diff --git a/src/mainboard/tyan/s2885/Options.lb b/src/mainboard/tyan/s2885/Options.lb index 74aaedbe69..7bc324e606 100644 --- a/src/mainboard/tyan/s2885/Options.lb +++ b/src/mainboard/tyan/s2885/Options.lb @@ -57,6 +57,11 @@ uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN uses K8_E0_MEM_HOLE_SIZEK +uses USE_DCACHE_RAM +uses DCACHE_RAM_BASE +uses DCACHE_RAM_SIZE +uses CONFIG_USE_INIT + ### ### Build options ### @@ -131,6 +136,15 @@ default K8_E0_MEM_HOLE_SIZEK=0x100000 default CONFIG_CONSOLE_VGA=1 default CONFIG_PCI_ROM_RUN=1 + +## +## enable CACHE_AS_RAM specifics +## +default USE_DCACHE_RAM=1 +default DCACHE_RAM_BASE=0xcf000 +default DCACHE_RAM_SIZE=0x1000 +default CONFIG_USE_INIT=1 + ## ## Build code to setup a generic IOAPIC ## @@ -139,8 +153,8 @@ default CONFIG_IOAPIC=1 ## ## Clean up the motherboard id strings ## -default MAINBOARD_PART_NUMBER="Tyan" -default MAINBOARD_VENDOR="s2885" +default MAINBOARD_PART_NUMBER="s2885" +default MAINBOARD_VENDOR="Tyan" default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2885 diff --git a/src/mainboard/tyan/s2885/cache_as_ram_auto.c b/src/mainboard/tyan/s2885/cache_as_ram_auto.c new file mode 100644 index 0000000000..4bbbdf0e5a --- /dev/null +++ b/src/mainboard/tyan/s2885/cache_as_ram_auto.c @@ -0,0 +1,472 @@ +#define ASSEMBLY 1 +#define __ROMCC__ + +#include <stdint.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/romcc_io.h> +#include <cpu/x86/lapic.h> +#include "option_table.h" +#include "pc80/mc146818rtc_early.c" +#include "pc80/serial.c" +#include "arch/i386/lib/console.c" +#include "ram/ramtest.c" + +#if 0 +static void post_code(uint8_t value) { +#if 1 + int i; + for(i=0;i<0x80000;i++) { + outb(value, 0x80); + } +#endif +} +#endif + +#include "northbridge/amd/amdk8/cpu_rev.c" +#define K8_HT_FREQ_1G_SUPPORT 0 +#include "northbridge/amd/amdk8/incoherent_ht.c" +#include "southbridge/amd/amd8111/amd8111_early_smbus.c" +#include "northbridge/amd/amdk8/raminit.h" +#include "cpu/amd/model_fxx/apic_timer.c" +#include "lib/delay.c" + +#if CONFIG_USE_INIT == 0 +#include "lib/memcpy.c" +#endif + +#include "cpu/x86/lapic/boot_cpu.c" +#include "northbridge/amd/amdk8/reset_test.c" +#include "northbridge/amd/amdk8/debug.c" +#include "superio/winbond/w83627hf/w83627hf_early_serial.c" + +#include "cpu/amd/mtrr/amd_earlymtrr.c" +#include "cpu/x86/bist.h" + +#include "northbridge/amd/amdk8/setup_resource_map.c" + +#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) + +static void hard_reset(void) +{ + set_bios_reset(); + + /* enable cf9 */ + pci_write_config8(PCI_DEV(0, 0x04, 3), 0x41, 0xf1); + /* reset */ + outb(0x0e, 0x0cf9); +} + +static void soft_reset(void) +{ + set_bios_reset(); + pci_write_config8(PCI_DEV(0, 0x04, 0), 0x47, 1); +} + +static void memreset_setup(void) +{ + if (is_cpu_pre_c0()) { + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0 + } + else { + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1 + } + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17); +} + +static void memreset(int controllers, const struct mem_controller *ctrl) +{ + if (is_cpu_pre_c0()) { + udelay(800); + outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1 + udelay(90); + } +} + +static inline void activate_spd_rom(const struct mem_controller *ctrl) +{ + /* nothing to do */ +} + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#define K8_4RANK_DIMM_SUPPORT 1 + +#include "northbridge/amd/amdk8/raminit.c" +#if 0 + #define ENABLE_APIC_EXT_ID 1 + #define APIC_ID_OFFSET 0x10 + #define LIFT_BSP_APIC_ID 0 +#else + #define ENABLE_APIC_EXT_ID 0 +#endif +#include "northbridge/amd/amdk8/coherent_ht.c" +#include "sdram/generic_sdram.c" + + /* tyan does not want the default */ +#include "resourcemap.c" + +#if CONFIG_LOGICAL_CPUS==1 +#define SET_NB_CFG_54 1 +#include "cpu/amd/dualcore/dualcore.c" +#endif + +#define FIRST_CPU 1 +#define SECOND_CPU 1 +#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU) + +#include "cpu/amd/car/copy_and_run.c" + +#if USE_FALLBACK_IMAGE == 1 + +#include "southbridge/amd/amd8111/amd8111_enable_rom.c" +#include "northbridge/amd/amdk8/early_ht.c" + +void real_main(unsigned long bist); + +void amd64_main(unsigned long bist) +{ +#if CONFIG_LOGICAL_CPUS==1 + struct node_core_id id; +#else + unsigned nodeid; +#endif + /* Make cerain my local apic is useable */ +// enable_lapic(); + +#if CONFIG_LOGICAL_CPUS==1 + id = get_node_core_id_x(); + /* Is this a cpu only reset? */ + if (cpu_init_detected(id.nodeid)) { +#else +// nodeid = lapicid(); + nodeid = get_node_id(); + /* Is this a cpu only reset? */ + if (cpu_init_detected(nodeid)) { +#endif + if (last_boot_normal()) { + goto normal_image; + } else { + goto cpu_reset; + } + } + + /* Is this a secondary cpu? */ +// post_code(0x21); + if (!boot_cpu()) { + if (last_boot_normal()) { + goto normal_image; + } else { + goto fallback_image; + } + } + + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + enumerate_ht_chain(); + + /* Setup the ck804 */ + amd8111_enable_rom(); + + /* Is this a deliberate reset by the bios */ +// post_code(0x22); + if (bios_reset_detected() && last_boot_normal()) { + goto normal_image; + } + /* This is the primary cpu how should I boot? */ + else if (do_normal_boot()) { + goto normal_image; + } + else { + goto fallback_image; + } + normal_image: +// post_code(0x23); + __asm__ volatile ("jmp __normal_image" + : /* outputs */ + : "a" (bist) /* inputs */ + ); + cpu_reset: +// post_code(0x24); +#if 0 + //CPU reset will reset memtroller ??? + asm volatile ("jmp __cpu_reset" + : /* outputs */ + : "a"(bist) /* inputs */ + ); +#endif + + fallback_image: +// post_code(0x25); + real_main(bist); +} +void real_main(unsigned long bist) +#else +void amd64_main(unsigned long bist) +#endif +{ + static const struct mem_controller cpu[] = { +#if FIRST_CPU + { + .node_id = 0, + .f0 = PCI_DEV(0, 0x18, 0), + .f1 = PCI_DEV(0, 0x18, 1), + .f2 = PCI_DEV(0, 0x18, 2), + .f3 = PCI_DEV(0, 0x18, 3), + .channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 }, + .channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 }, + }, +#endif +#if SECOND_CPU + { + .node_id = 1, + .f0 = PCI_DEV(0, 0x19, 0), + .f1 = PCI_DEV(0, 0x19, 1), + .f2 = PCI_DEV(0, 0x19, 2), + .f3 = PCI_DEV(0, 0x19, 3), + .channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 }, + .channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 }, + }, +#endif + }; + + int needs_reset; + unsigned cpu_reset = 0; + + if (bist == 0) { +#if CONFIG_LOGICAL_CPUS==1 + struct node_core_id id; +#else + unsigned nodeid; +#endif + /* Skip this if there was a built in self test failure */ +// amd_early_mtrr_init(); # don't need, already done in cache_as_ram + +#if CONFIG_LOGICAL_CPUS==1 + set_apicid_cpuid_lo(); + id = get_node_core_id_x(); // that is initid + #if ENABLE_APIC_EXT_ID == 1 + if(id.coreid == 0) { + enable_apic_ext_id(id.nodeid); + } + #endif +#else + nodeid = get_node_id(); + #if ENABLE_APIC_EXT_ID == 1 + enable_apic_ext_id(nodeid); + #endif +#endif + + enable_lapic(); + init_timer(); + +// post_code(0x30); + +#if CONFIG_LOGICAL_CPUS==1 + #if ENABLE_APIC_EXT_ID == 1 + #if LIFT_BSP_APIC_ID == 0 + if( id.nodeid != 0 ) //all except cores in node0 + #endif + lapic_write(LAPIC_ID, ( lapic_read(LAPIC_ID) | (APIC_ID_OFFSET<<24) ) ); + #endif + if(id.coreid == 0) { + if (cpu_init_detected(id.nodeid)) { +// __asm__ volatile ("jmp __cpu_reset"); + cpu_reset = 1; + goto cpu_reset_x; + } + distinguish_cpu_resets(id.nodeid); +// start_other_core(id.nodeid); + } +#else + #if ENABLE_APIC_EXT_ID == 1 + #if LIFT_BSP_APIC_ID == 0 + if(nodeid != 0) + #endif + lapic_write(LAPIC_ID, ( lapic_read(LAPIC_ID) | (APIC_ID_OFFSET<<24) ) ); // CPU apicid is from 0x10 + + #endif + if (cpu_init_detected(nodeid)) { +// __asm__ volatile ("jmp __cpu_reset"); + cpu_reset = 1; + goto cpu_reset_x; + } + distinguish_cpu_resets(nodeid); +#endif + +// post_code(0x31); + + if (!boot_cpu() +#if CONFIG_LOGICAL_CPUS==1 + || (id.coreid != 0) +#endif + ) { + // We need stop the CACHE as RAM for this CPU too + #include "cpu/amd/car/cache_as_ram_post.c" + stop_this_cpu(); // it will stop all cores except core0 of cpu0 + } + } + +// post_code(0x32); + + w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); + uart_init(); + console_init(); + +// dump_mem(DCACHE_RAM_BASE+DCACHE_RAM_SIZE-0x200, DCACHE_RAM_BASE+DCACHE_RAM_SIZE); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + setup_s2885_resource_map(); +#if 0 + dump_pci_device(PCI_DEV(0, 0x18, 0)); + dump_pci_device(PCI_DEV(0, 0x19, 0)); +#endif + + needs_reset = setup_coherent_ht_domain(); + +#if CONFIG_LOGICAL_CPUS==1 + // It is said that we should start core1 after all core0 launched + start_other_cores(); +#endif +#if 0 + + // You need to preset bus num in PCI_DEV(0, 0x18,1) 0xe0, 0xe4, 0xe8, 0xec + needs_reset |= ht_setup_chains(2); +#else + // automatically set that for you, but you might meet tight space + needs_reset |= ht_setup_chains_x(); +#endif + + if (needs_reset) { + print_info("ht reset -\r\n"); + soft_reset(); + } + + enable_smbus(); +#if 0 + dump_spd_registers(&cpu[0]); +#endif +#if 0 + dump_smbus_registers(); +#endif + + memreset_setup(); + sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu); + +#if 0 + dump_pci_devices(); +#endif + + /* Check all of memory */ +#if 0 + msr_t msr; + msr = rdmsr(TOP_MEM2); + print_debug("TOP_MEM2: "); + print_debug_hex32(msr.hi); + print_debug_hex32(msr.lo); + print_debug("\r\n"); +#endif +#if 0 + ram_check(0x00000000, msr.lo+(msr.hi<<32)); +#endif + +#if 0 + // Check 16MB of memory @ 0 + ram_check(0x00000000, 0x00100000); + // Check 16MB of memory @ 2GB + ram_check(0x80000000, 0x80100000); +#endif + +#if 1 + { + /* Check value of esp to verify if we have enough rom for stack in Cache as RAM */ + unsigned v_esp; + __asm__ volatile ( + "movl %%esp, %0\n\t" + : "=a" (v_esp) + ); +#if CONFIG_USE_INIT + printk_debug("v_esp=%08x\r\n", v_esp); +#else + print_debug("v_esp="); print_debug_hex32(v_esp); print_debug("\r\n"); +#endif + } +#endif + +#if 1 + + +cpu_reset_x: + +#if CONFIG_USE_INIT + printk_debug("cpu_reset = %08x\r\n",cpu_reset); +#else + print_debug("cpu_reset = "); print_debug_hex32(cpu_reset); print_debug("\r\n"); +#endif + + if(cpu_reset == 0) { + print_debug("Clearing initial memory region: "); + } + print_debug("No cache as ram now - "); + + /* store cpu_reset to ebx */ + __asm__ volatile ( + "movl %0, %%ebx\n\t" + ::"a" (cpu_reset) + ); + + if(cpu_reset==0) { +#define CLEAR_FIRST_1M_RAM 1 +#include "cpu/amd/car/cache_as_ram_post.c" + } + else { +#undef CLEAR_FIRST_1M_RAM +#include "cpu/amd/car/cache_as_ram_post.c" + } + + __asm__ volatile ( + /* set new esp */ /* before _RAMBASE */ + "movl %0, %%ebp\n\t" + "movl %0, %%esp\n\t" + ::"a"( _RAMBASE - 4 ) + ); + + { + unsigned new_cpu_reset; + + /* get back cpu_reset from ebx */ + __asm__ volatile ( + "movl %%ebx, %0\n\t" + :"=a" (new_cpu_reset) + ); + + print_debug("Use Ram as Stack now - "); /* but We can not go back any more, we lost old stack data in cache as ram*/ + if(new_cpu_reset==0) { + print_debug("done\r\n"); + } else + { + print_debug("\r\n"); + } + +#if CONFIG_USE_INIT + printk_debug("new_cpu_reset = %08x\r\n", new_cpu_reset); +#else + print_debug("new_cpu_reset = "); print_debug_hex32(new_cpu_reset); print_debug("\r\n"); +#endif + /*copy and execute linuxbios_ram */ + copy_and_run(new_cpu_reset); + /* We will not return */ + } +#endif + + + print_debug("should not be here -\r\n"); + +} diff --git a/src/mainboard/tyan/s2891/Config.lb b/src/mainboard/tyan/s2891/Config.lb index 0f428d10c1..53a7fee36e 100644 --- a/src/mainboard/tyan/s2891/Config.lb +++ b/src/mainboard/tyan/s2891/Config.lb @@ -47,26 +47,51 @@ driver mainboard.o if HAVE_MP_TABLE object mptable.o end if HAVE_PIRQ_TABLE object irq_tables.o end #object reset.o -## -## Romcc output -## -makerule ./failover.E - depends "$(MAINBOARD)/failover.c ./romcc" - action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" -end -makerule ./failover.inc - depends "$(MAINBOARD)/failover.c ./romcc" - action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" -end +if USE_DCACHE_RAM + + if CONFIG_USE_INIT + + makerule ./auto.o + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o auto.o" + end + + else + + makerule ./auto.inc + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@" + action "perl -e 's/.rodata/.rom.data/g' -pi $@" + action "perl -e 's/.text/.section .rom.text/g' -pi $@" + end + + end +else + + ## + ## Romcc output + ## + makerule ./failover.E + depends "$(MAINBOARD)/failover.c ./romcc" + action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" + end + + makerule ./failover.inc + depends "$(MAINBOARD)/failover.c ./romcc" + action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" + end + + makerule ./auto.E + depends "$(MAINBOARD)/auto.c option_table.h ./romcc" + action "./romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" + end + + makerule ./auto.inc + depends "$(MAINBOARD)/auto.c option_table.h ./romcc" + action "./romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" + end -makerule ./auto.E - depends "$(MAINBOARD)/auto.c option_table.h ./romcc" - action "./romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" -end -makerule ./auto.inc - depends "$(MAINBOARD)/auto.c option_table.h ./romcc" - action "./romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" end ## @@ -75,7 +100,16 @@ end mainboardinit cpu/x86/16bit/entry16.inc mainboardinit cpu/x86/32bit/entry32.inc ldscript /cpu/x86/16bit/entry16.lds -ldscript /cpu/x86/32bit/entry32.lds + +if USE_DCACHE_RAM + if CONFIG_USE_INIT + ldscript /cpu/x86/32bit/entry32.lds + end + + if CONFIG_USE_INIT + ldscript /cpu/amd/car/cache_as_ram.lds + end +end ## ## Build our reset vector (This is where linuxBIOS is entered) @@ -88,8 +122,11 @@ else ldscript /cpu/x86/32bit/reset32.lds end -### Should this be in the northbridge code? -mainboardinit arch/i386/lib/cpu_reset.inc +if USE_DCACHE_RAM +else + ### Should this be in the northbridge code? + mainboardinit arch/i386/lib/cpu_reset.inc +end ## ## Include an id string (For safe flashing) @@ -105,14 +142,24 @@ if USE_FALLBACK_IMAGE ldscript /southbridge/nvidia/ck804/romstrap.lds end +if USE_DCACHE_RAM + ## + ## Setup Cache-As-Ram + ## + mainboardinit cpu/amd/car/cache_as_ram.inc +end + ### ### This is the early phase of linuxBIOS startup ### Things are delicate and we test to see if we should ### failover to another image. ### if USE_FALLBACK_IMAGE - ldscript /arch/i386/lib/failover.lds - mainboardinit ./failover.inc + ldscript /arch/i386/lib/failover.lds + if USE_DCACHE_RAM + else + mainboardinit ./failover.inc + end end ### @@ -122,12 +169,25 @@ end ## ## Setup RAM ## -mainboardinit cpu/x86/fpu/enable_fpu.inc -mainboardinit cpu/x86/mmx/enable_mmx.inc -mainboardinit cpu/x86/sse/enable_sse.inc -mainboardinit ./auto.inc -mainboardinit cpu/x86/sse/disable_sse.inc -mainboardinit cpu/x86/mmx/disable_mmx.inc +if USE_DCACHE_RAM + + if CONFIG_USE_INIT + initobject auto.o + else + mainboardinit ./auto.inc + end + +else + # ROMCC + mainboardinit cpu/x86/fpu/enable_fpu.inc + mainboardinit cpu/x86/mmx/enable_mmx.inc + mainboardinit cpu/x86/sse/enable_sse.inc + mainboardinit ./auto.inc + mainboardinit cpu/x86/sse/disable_sse.inc + mainboardinit cpu/x86/mmx/disable_mmx.inc + +end + ## ## Include the secondary Configuration files @@ -247,7 +307,8 @@ chip northbridge/amd/amdk8/root_complex # chip drivers/ati/ragexl chip drivers/pci/onboard device pci 7.0 on end - register "rom_address" = "0xfff80000" + register "rom_address" = "0xfff80000" #for 512K + #register "rom_address" = "0xfff00000" #for 1M end end device pci a.0 off end # NIC @@ -283,13 +344,14 @@ chip northbridge/amd/amdk8/root_complex end #mc0 end # pci_domain - -# chip drivers/generic/debug -# device pnp 0.0 off end -# device pnp 0.1 off end -# device pnp 0.2 off end -# device pnp 0.3 off end -# device pnp 0.4 off end -# device pnp 0.5 on end -# end +# chip drivers/generic/debug +# device pnp 0.0 off end # chip name +# device pnp 0.1 on end # pci_regs_all +# device pnp 0.2 off end # mem +# device pnp 0.3 off end # cpuid +# device pnp 0.4 on end # smbus_regs_all +# device pnp 0.5 off end # dual core msr +# device pnp 0.6 off end # cache size +# device pnp 0.7 off end # tsc +# end end # root_complex diff --git a/src/mainboard/tyan/s2891/Options.lb b/src/mainboard/tyan/s2891/Options.lb index b4a374db74..7147c69d76 100644 --- a/src/mainboard/tyan/s2891/Options.lb +++ b/src/mainboard/tyan/s2891/Options.lb @@ -60,10 +60,19 @@ uses K8_E0_MEM_HOLE_SIZEK uses CK804_DEVN_BASE +uses USE_DCACHE_RAM +uses DCACHE_RAM_BASE +uses DCACHE_RAM_SIZE +uses CONFIG_USE_INIT + ## ROM_SIZE is the size of boot ROM that this board will use. #512K bytes default ROM_SIZE=524288 +#1M bytes +#default ROM_SIZE=1048576 + + ## ## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use ## @@ -83,9 +92,9 @@ default HAVE_FALLBACK_BOOT=1 ## default HAVE_HARD_RESET=1 -default HARD_RESET_BUS=1 -default HARD_RESET_DEVICE=4 -default HARD_RESET_FUNCTION=0 +#default HARD_RESET_BUS=1 +#default HARD_RESET_DEVICE=4 +#default HARD_RESET_FUNCTION=0 ## ## Build code to export a programmable irq routing table @@ -131,8 +140,17 @@ default CK804_DEVN_BASE=0 #default CONFIG_CONSOLE_BTEXT=1 #VGA Console -default CONFIG_CONSOLE_VGA=1 -default CONFIG_PCI_ROM_RUN=1 +#default CONFIG_CONSOLE_VGA=1 +#default CONFIG_PCI_ROM_RUN=1 + +## +## enable CACHE_AS_RAM specifics +## +default USE_DCACHE_RAM=1 +default DCACHE_RAM_BASE=0xcf000 +default DCACHE_RAM_SIZE=0x1000 +default CONFIG_USE_INIT=1 + ## ## Build code to setup a generic IOAPIC @@ -142,8 +160,8 @@ default CONFIG_IOAPIC=1 ## ## Clean up the motherboard id strings ## -default MAINBOARD_PART_NUMBER="Tyan" -default MAINBOARD_VENDOR="s2891" +default MAINBOARD_PART_NUMBER="s2891" +default MAINBOARD_VENDOR="Tyan" default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2891 diff --git a/src/mainboard/tyan/s2891/cache_as_ram_auto.c b/src/mainboard/tyan/s2891/cache_as_ram_auto.c new file mode 100644 index 0000000000..b0ddb837a5 --- /dev/null +++ b/src/mainboard/tyan/s2891/cache_as_ram_auto.c @@ -0,0 +1,411 @@ +#define ASSEMBLY 1 +#define __ROMCC__ + +#include <stdint.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/romcc_io.h> +#include <cpu/x86/lapic.h> +#include "option_table.h" +#include "pc80/mc146818rtc_early.c" +#include "pc80/serial.c" +#include "arch/i386/lib/console.c" +#include "ram/ramtest.c" + +#include "northbridge/amd/amdk8/cpu_rev.c" +//#define K8_HT_FREQ_1G_SUPPORT 1 +#include "northbridge/amd/amdk8/incoherent_ht.c" +#include "southbridge/nvidia/ck804/ck804_early_smbus.c" +#include "northbridge/amd/amdk8/raminit.h" +#include "cpu/amd/model_fxx/apic_timer.c" +#include "lib/delay.c" +#if CONFIG_USE_INIT == 0 +#include "lib/memcpy.c" +#endif +#include "cpu/x86/lapic/boot_cpu.c" +#include "northbridge/amd/amdk8/reset_test.c" +#include "northbridge/amd/amdk8/debug.c" +#include "superio/winbond/w83627hf/w83627hf_early_serial.c" + +#include "cpu/amd/mtrr/amd_earlymtrr.c" +#include "cpu/x86/bist.h" + +#include "northbridge/amd/amdk8/setup_resource_map.c" + +#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) + +static void hard_reset(void) +{ + set_bios_reset(); + + /* full reset */ + outb(0x0a, 0x0cf9); + outb(0x0e, 0x0cf9); +} + +static void soft_reset(void) +{ + set_bios_reset(); +#if 1 + /* link reset */ + outb(0x02, 0x0cf9); + outb(0x06, 0x0cf9); +#endif +} + +static void memreset_setup(void) +{ +} + +static void memreset(int controllers, const struct mem_controller *ctrl) +{ +} + +static inline void activate_spd_rom(const struct mem_controller *ctrl) +{ + /* nothing to do */ +} + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#define K8_4RANK_DIMM_SUPPORT 1 + +#include "northbridge/amd/amdk8/raminit.c" +#include "northbridge/amd/amdk8/coherent_ht.c" +#include "sdram/generic_sdram.c" + + /* tyan does not want the default */ +#include "resourcemap.c" + +#if CONFIG_LOGICAL_CPUS==1 +#define SET_NB_CFG_54 1 +#include "cpu/amd/dualcore/dualcore.c" +#endif + +#define FIRST_CPU 1 +#define SECOND_CPU 1 +#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU) + +#define CK804_NUM 1 +#include "southbridge/nvidia/ck804/ck804_early_setup_ss.h" +#include "southbridge/nvidia/ck804/ck804_early_setup.c" + +#include "cpu/amd/car/copy_and_run.c" + +#if USE_FALLBACK_IMAGE == 1 + +#include "southbridge/nvidia/ck804/ck804_enable_rom.c" +#include "northbridge/amd/amdk8/early_ht.c" + +static void sio_setup(void) +{ + + unsigned value; + uint32_t dword; + uint8_t byte; + + byte = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b); + byte |= 0x20; + pci_write_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b, byte); + + dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0); + dword |= (1<<0) | (1<<1); + pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0, dword); + +#if 1 + dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa4); + dword |= (1<<16); + pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa4, dword); + +#endif + +} +void real_main(unsigned long bist); + +void amd64_main(unsigned long bist) +{ +#if CONFIG_LOGICAL_CPUS==1 + struct node_core_id id; +#else + unsigned nodeid; +#endif + /* Make cerain my local apic is useable */ +// enable_lapic(); + +#if CONFIG_LOGICAL_CPUS==1 + id = get_node_core_id_x(); + /* Is this a cpu only reset? */ + if (cpu_init_detected(id.nodeid)) { +#else +// nodeid = lapicid() & 0xf; + nodeid = get_node_id(); + /* Is this a cpu only reset? */ + if (cpu_init_detected(nodeid)) { +#endif + if (last_boot_normal()) { + goto normal_image; + } else { + goto cpu_reset; + } + } + + /* Is this a secondary cpu? */ + if (!boot_cpu()) { + if (last_boot_normal()) { + goto normal_image; + } else { + goto fallback_image; + } + } + + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + enumerate_ht_chain(); + + sio_setup(); + + /* Setup the ck804 */ + ck804_enable_rom(); + + /* Is this a deliberate reset by the bios */ + if (bios_reset_detected() && last_boot_normal()) { + goto normal_image; + } + /* This is the primary cpu how should I boot? */ + else if (do_normal_boot()) { + goto normal_image; + } + else { + goto fallback_image; + } + normal_image: + __asm__ volatile ("jmp __normal_image" + : /* outputs */ + : "a" (bist) /* inputs */ + ); + cpu_reset: +#if 0 + //CPU reset will reset memtroller ??? + asm volatile ("jmp __cpu_reset" + : /* outputs */ + : "a"(bist) /* inputs */ + ); +#endif + + fallback_image: + real_main(bist); +} +void real_main(unsigned long bist) +#else +void amd64_main(unsigned long bist) +#endif +{ + static const struct mem_controller cpu[] = { +#if FIRST_CPU + { + .node_id = 0, + .f0 = PCI_DEV(0, 0x18, 0), + .f1 = PCI_DEV(0, 0x18, 1), + .f2 = PCI_DEV(0, 0x18, 2), + .f3 = PCI_DEV(0, 0x18, 3), + .channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 }, + .channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 }, + }, +#endif +#if SECOND_CPU + { + .node_id = 1, + .f0 = PCI_DEV(0, 0x19, 0), + .f1 = PCI_DEV(0, 0x19, 1), + .f2 = PCI_DEV(0, 0x19, 2), + .f3 = PCI_DEV(0, 0x19, 3), + .channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 }, + .channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 }, + }, +#endif + }; + + int needs_reset; + unsigned cpu_reset = 0; + + if (bist == 0) { +#if CONFIG_LOGICAL_CPUS==1 + struct node_core_id id; +#else + unsigned nodeid; +#endif + /* Skip this if there was a built in self test failure */ +// amd_early_mtrr_init(); # don't need, already done in cache_as_ram + +#if CONFIG_LOGICAL_CPUS==1 + set_apicid_cpuid_lo(); + id = get_node_core_id_x(); // that is initid +#else + nodeid = get_node_id(); +#endif + + enable_lapic(); +// init_timer(); + +#if CONFIG_LOGICAL_CPUS==1 + if(id.coreid == 0) { + if (cpu_init_detected(id.nodeid)) { + cpu_reset = 1; + goto cpu_reset_x; + } + distinguish_cpu_resets(id.nodeid); + } +#else + if (cpu_init_detected(nodeid)) { + cpu_reset = 1; + goto cpu_reset_x; + } + distinguish_cpu_resets(nodeid); +#endif + + + if (!boot_cpu() +#if CONFIG_LOGICAL_CPUS==1 + || (id.coreid != 0) +#endif + ) { + // We need stop the CACHE as RAM for this CPU too + #include "cpu/amd/car/cache_as_ram_post.c" + stop_this_cpu(); // it will stop all cores except core0 of cpu0 + } + + } + + init_timer(); // only do it it first CPU + + + w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); + uart_init(); + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + setup_s2891_resource_map(); +#if 0 + dump_pci_device(PCI_DEV(0, 0x18, 0)); + dump_pci_device(PCI_DEV(0, 0x19, 0)); +#endif + + needs_reset = setup_coherent_ht_domain(); + +#if CONFIG_LOGICAL_CPUS==1 + start_other_cores(); +#endif + needs_reset |= ht_setup_chains_x(); + + needs_reset |= ck804_early_setup_x(); + + if (needs_reset) { + print_info("ht reset -\r\n"); + soft_reset(); + } + + enable_smbus(); +#if 0 + dump_spd_registers(&cpu[0]); +#endif +#if 0 + dump_smbus_registers(); +#endif + + memreset_setup(); + sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu); + +#if 0 + dump_pci_devices(); +#endif + +#if 1 + { + /* Check value of esp to verify if we have enough rom for stack in Cache as RAM */ + unsigned v_esp; + __asm__ volatile ( + "movl %%esp, %0\n\t" + : "=a" (v_esp) + ); +#if CONFIG_USE_INIT + printk_debug("v_esp=%08x\r\n", v_esp); +#else + print_debug("v_esp="); print_debug_hex32(v_esp); print_debug("\r\n"); +#endif + } + +#endif + +cpu_reset_x: + +#if CONFIG_USE_INIT + printk_debug("cpu_reset = %08x\r\n",cpu_reset); +#else + print_debug("cpu_reset = "); print_debug_hex32(cpu_reset); print_debug("\r\n"); +#endif + + if(cpu_reset == 0) { + print_debug("Clearing initial memory region: "); + } + print_debug("No cache as ram now - "); + + /* store cpu_reset to ebx */ + __asm__ volatile ( + "movl %0, %%ebx\n\t" + ::"a" (cpu_reset) + ); + + if(cpu_reset==0) { +#define CLEAR_FIRST_1M_RAM 1 +#include "cpu/amd/car/cache_as_ram_post.c" + } + else { +#undef CLEAR_FIRST_1M_RAM +#include "cpu/amd/car/cache_as_ram_post.c" + } + + __asm__ volatile ( + /* set new esp */ /* before _RAMBASE */ + "movl %0, %%ebp\n\t" + "movl %0, %%esp\n\t" + ::"a"( _RAMBASE - 4 ) + ); + + { + unsigned new_cpu_reset; + + /* get back cpu_reset from ebx */ + __asm__ volatile ( + "movl %%ebx, %0\n\t" + :"=a" (new_cpu_reset) + ); + + /* We can not go back any more, we lost old stack data in cache as ram*/ + if(new_cpu_reset==0) { + print_debug("Use Ram as Stack now - done\r\n"); + } else + { + print_debug("Use Ram as Stack now - \r\n"); + } +#if CONFIG_USE_INIT + printk_debug("new_cpu_reset = %08x\r\n", new_cpu_reset); +#else + print_debug("new_cpu_reset = "); print_debug_hex32(new_cpu_reset); print_debug("\r\n"); +#endif + + /*copy and execute linuxbios_ram */ + copy_and_run(new_cpu_reset); + /* We will not return */ + } + + + print_debug("should not be here -\r\n"); + +} diff --git a/src/mainboard/tyan/s2892/Config.lb b/src/mainboard/tyan/s2892/Config.lb index 215c4a80db..504f12d270 100644 --- a/src/mainboard/tyan/s2892/Config.lb +++ b/src/mainboard/tyan/s2892/Config.lb @@ -47,6 +47,28 @@ driver mainboard.o if HAVE_MP_TABLE object mptable.o end if HAVE_PIRQ_TABLE object irq_tables.o end #object reset.o + +if USE_DCACHE_RAM + +if CONFIG_USE_INIT + +makerule ./auto.o + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o auto.o" +end + +else + +makerule ./auto.inc + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@" + action "perl -e 's/.rodata/.rom.data/g' -pi $@" + action "perl -e 's/.text/.section .rom.text/g' -pi $@" +end + +end +else + ## ## Romcc output ## @@ -69,13 +91,25 @@ makerule ./auto.inc action "./romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" end + +end + ## ## Build our 16 bit and 32 bit linuxBIOS entry code ## mainboardinit cpu/x86/16bit/entry16.inc mainboardinit cpu/x86/32bit/entry32.inc ldscript /cpu/x86/16bit/entry16.lds -ldscript /cpu/x86/32bit/entry32.lds + +if USE_DCACHE_RAM + if CONFIG_USE_INIT + ldscript /cpu/x86/32bit/entry32.lds + end + + if CONFIG_USE_INIT + ldscript /cpu/amd/car/cache_as_ram.lds + end +end ## ## Build our reset vector (This is where linuxBIOS is entered) @@ -88,8 +122,11 @@ else ldscript /cpu/x86/32bit/reset32.lds end +if USE_DCACHE_RAM +else ### Should this be in the northbridge code? mainboardinit arch/i386/lib/cpu_reset.inc +end ## ## Include an id string (For safe flashing) @@ -105,15 +142,26 @@ if USE_FALLBACK_IMAGE ldscript /southbridge/nvidia/ck804/romstrap.lds end +if USE_DCACHE_RAM +## +## Setup Cache-As-Ram +## +mainboardinit cpu/amd/car/cache_as_ram.inc +end + ### ### This is the early phase of linuxBIOS startup ### Things are delicate and we test to see if we should ### failover to another image. ### if USE_FALLBACK_IMAGE - ldscript /arch/i386/lib/failover.lds +if USE_DCACHE_RAM + ldscript /arch/i386/lib/failover.lds +else + ldscript /arch/i386/lib/failover.lds mainboardinit ./failover.inc end +end ### ### O.k. We aren't just an intermediary anymore! @@ -122,6 +170,16 @@ end ## ## Setup RAM ## +if USE_DCACHE_RAM + +if CONFIG_USE_INIT +initobject auto.o +else +mainboardinit ./auto.inc +end + +else +# ROMCC mainboardinit cpu/x86/fpu/enable_fpu.inc mainboardinit cpu/x86/mmx/enable_mmx.inc mainboardinit cpu/x86/sse/enable_sse.inc @@ -129,6 +187,8 @@ mainboardinit ./auto.inc mainboardinit cpu/x86/sse/disable_sse.inc mainboardinit cpu/x86/mmx/disable_mmx.inc +end + ## ## Include the secondary Configuration files ## diff --git a/src/mainboard/tyan/s2892/Options.lb b/src/mainboard/tyan/s2892/Options.lb index 6423773a27..20b58bce85 100644 --- a/src/mainboard/tyan/s2892/Options.lb +++ b/src/mainboard/tyan/s2892/Options.lb @@ -60,10 +60,19 @@ uses K8_E0_MEM_HOLE_SIZEK uses CK804_DEVN_BASE +uses USE_DCACHE_RAM +uses DCACHE_RAM_BASE +uses DCACHE_RAM_SIZE +uses CONFIG_USE_INIT + ## ROM_SIZE is the size of boot ROM that this board will use. #512K bytes default ROM_SIZE=524288 +#1M bytes +#default ROM_SIZE=1048576 + + ## ## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use ## @@ -83,9 +92,9 @@ default HAVE_FALLBACK_BOOT=1 ## default HAVE_HARD_RESET=1 -default HARD_RESET_BUS=1 -default HARD_RESET_DEVICE=4 -default HARD_RESET_FUNCTION=0 +#default HARD_RESET_BUS=1 +#default HARD_RESET_DEVICE=4 +#default HARD_RESET_FUNCTION=0 ## ## Build code to export a programmable irq routing table @@ -134,6 +143,14 @@ default CK804_DEVN_BASE=0 default CONFIG_CONSOLE_VGA=1 default CONFIG_PCI_ROM_RUN=1 +## +## enable CACHE_AS_RAM specifics +## +default USE_DCACHE_RAM=1 +default DCACHE_RAM_BASE=0xcf000 +default DCACHE_RAM_SIZE=0x1000 +default CONFIG_USE_INIT=1 + ## ## Build code to setup a generic IOAPIC @@ -143,8 +160,8 @@ default CONFIG_IOAPIC=1 ## ## Clean up the motherboard id strings ## -default MAINBOARD_PART_NUMBER="Tyan" -default MAINBOARD_VENDOR="s2892" +default MAINBOARD_PART_NUMBER="s2892" +default MAINBOARD_VENDOR="Tyan" default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2892 diff --git a/src/mainboard/tyan/s2892/cache_as_ram_auto.c b/src/mainboard/tyan/s2892/cache_as_ram_auto.c new file mode 100644 index 0000000000..14b15d4775 --- /dev/null +++ b/src/mainboard/tyan/s2892/cache_as_ram_auto.c @@ -0,0 +1,415 @@ +#define ASSEMBLY 1 +#define __ROMCC__ + +#include <stdint.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/romcc_io.h> +#include <cpu/x86/lapic.h> +#include "option_table.h" +#include "pc80/mc146818rtc_early.c" +#include "pc80/serial.c" +#include "arch/i386/lib/console.c" +#include "ram/ramtest.c" + +#include "northbridge/amd/amdk8/cpu_rev.c" +#define K8_HT_FREQ_1G_SUPPORT 0 +#include "northbridge/amd/amdk8/incoherent_ht.c" +#include "southbridge/nvidia/ck804/ck804_early_smbus.c" +#include "northbridge/amd/amdk8/raminit.h" +#include "cpu/amd/model_fxx/apic_timer.c" +#include "lib/delay.c" + +#if CONFIG_USE_INIT == 0 +#include "lib/memcpy.c" +#endif + +#include "cpu/x86/lapic/boot_cpu.c" +#include "northbridge/amd/amdk8/reset_test.c" +#include "northbridge/amd/amdk8/debug.c" +#include "superio/winbond/w83627hf/w83627hf_early_serial.c" + +#include "cpu/amd/mtrr/amd_earlymtrr.c" +#include "cpu/x86/bist.h" + +#include "northbridge/amd/amdk8/setup_resource_map.c" + +#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) + +static void hard_reset(void) +{ + set_bios_reset(); + + /* full reset */ + outb(0x0a, 0x0cf9); + outb(0x0e, 0x0cf9); +} + +static void soft_reset(void) +{ + set_bios_reset(); +#if 1 + /* link reset */ + outb(0x02, 0x0cf9); + outb(0x06, 0x0cf9); +#endif +} + +static void memreset_setup(void) +{ +} + +static void memreset(int controllers, const struct mem_controller *ctrl) +{ +} + +static inline void activate_spd_rom(const struct mem_controller *ctrl) +{ + /* nothing to do */ +} + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#define K8_4RANK_DIMM_SUPPORT 1 + +#include "northbridge/amd/amdk8/raminit.c" +#include "northbridge/amd/amdk8/coherent_ht.c" +#include "sdram/generic_sdram.c" + + /* tyan does not want the default */ +#include "resourcemap.c" + +#if CONFIG_LOGICAL_CPUS==1 +#define SET_NB_CFG_54 1 +#include "cpu/amd/dualcore/dualcore.c" +#endif + +#define FIRST_CPU 1 +#define SECOND_CPU 1 +#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU) + +#define CK804_NUM 1 +#include "southbridge/nvidia/ck804/ck804_early_setup_ss.h" +//set GPIO to input mode +#define CK804_MB_SETUP \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+15, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* M8,GPIO16, PCIXA_PRSNT2_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+44, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* P5,GPIO45, PCIXA_PRSNT1_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+16, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* K4,GPIO17, PCIXB_PRSNT1_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+45, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* P7,GPIO46, PCIXB_PRSNT2_L*/ \ + +#include "southbridge/nvidia/ck804/ck804_early_setup.c" + +#include "cpu/amd/car/copy_and_run.c" + +#if USE_FALLBACK_IMAGE == 1 + +#include "southbridge/nvidia/ck804/ck804_enable_rom.c" +#include "northbridge/amd/amdk8/early_ht.c" + +static void sio_setup(void) +{ + + unsigned value; + uint32_t dword; + uint8_t byte; + + byte = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b); + byte |= 0x20; + pci_write_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b, byte); + + dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0); + dword |= (1<<0); + pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0, dword); + + +} +void real_main(unsigned long bist); + +void amd64_main(unsigned long bist) +{ +#if CONFIG_LOGICAL_CPUS==1 + struct node_core_id id; +#else + unsigned nodeid; +#endif + /* Make cerain my local apic is useable */ +// enable_lapic(); + +#if CONFIG_LOGICAL_CPUS==1 + id = get_node_core_id_x(); + /* Is this a cpu only reset? */ + if (cpu_init_detected(id.nodeid)) { +#else +// nodeid = lapicid() & 0xf; + nodeid = get_node_id(); + /* Is this a cpu only reset? */ + if (cpu_init_detected(nodeid)) { +#endif + if (last_boot_normal()) { + goto normal_image; + } else { + goto cpu_reset; + } + } + + /* Is this a secondary cpu? */ + if (!boot_cpu()) { + if (last_boot_normal()) { + goto normal_image; + } else { + goto fallback_image; + } + } + + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + enumerate_ht_chain(); + + sio_setup(); + + /* Setup the ck804 */ + ck804_enable_rom(); + + /* Is this a deliberate reset by the bios */ + if (bios_reset_detected() && last_boot_normal()) { + goto normal_image; + } + /* This is the primary cpu how should I boot? */ + else if (do_normal_boot()) { + goto normal_image; + } + else { + goto fallback_image; + } + normal_image: + __asm__ volatile ("jmp __normal_image" + : /* outputs */ + : "a" (bist) /* inputs */ + ); + cpu_reset: +#if 0 + //CPU reset will reset memtroller ??? + asm volatile ("jmp __cpu_reset" + : /* outputs */ + : "a"(bist) /* inputs */ + ); +#endif + + fallback_image: + real_main(bist); +} +void real_main(unsigned long bist) +#else +void amd64_main(unsigned long bist) +#endif +{ + static const struct mem_controller cpu[] = { +#if FIRST_CPU + { + .node_id = 0, + .f0 = PCI_DEV(0, 0x18, 0), + .f1 = PCI_DEV(0, 0x18, 1), + .f2 = PCI_DEV(0, 0x18, 2), + .f3 = PCI_DEV(0, 0x18, 3), + .channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 }, + .channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 }, + }, +#endif +#if SECOND_CPU + { + .node_id = 1, + .f0 = PCI_DEV(0, 0x19, 0), + .f1 = PCI_DEV(0, 0x19, 1), + .f2 = PCI_DEV(0, 0x19, 2), + .f3 = PCI_DEV(0, 0x19, 3), + .channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 }, + .channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 }, + }, +#endif + }; + + int needs_reset; + unsigned cpu_reset = 0; + + if (bist == 0) { +#if CONFIG_LOGICAL_CPUS==1 + struct node_core_id id; +#else + unsigned nodeid; +#endif + /* Skip this if there was a built in self test failure */ +// amd_early_mtrr_init(); # don't need, already done in cache_as_ram + +#if CONFIG_LOGICAL_CPUS==1 + set_apicid_cpuid_lo(); + id = get_node_core_id_x(); // that is initid +#else + nodeid = get_node_id(); +#endif + + enable_lapic(); +// init_timer(); + +#if CONFIG_LOGICAL_CPUS==1 + if(id.coreid == 0) { + if (cpu_init_detected(id.nodeid)) { + cpu_reset = 1; + goto cpu_reset_x; + } + distinguish_cpu_resets(id.nodeid); + } +#else + if (cpu_init_detected(nodeid)) { + cpu_reset = 1; + goto cpu_reset_x; + } + distinguish_cpu_resets(nodeid); +#endif + + + if (!boot_cpu() +#if CONFIG_LOGICAL_CPUS==1 + || (id.coreid != 0) +#endif + ) { + // We need stop the CACHE as RAM for this CPU too + #include "cpu/amd/car/cache_as_ram_post.c" + stop_this_cpu(); // it will stop all cores except core0 of cpu0 + } + + } + + init_timer(); // only do it it first CPU + + + w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); + uart_init(); + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + setup_s2892_resource_map(); +#if 0 + dump_pci_device(PCI_DEV(0, 0x18, 0)); + dump_pci_device(PCI_DEV(0, 0x19, 0)); +#endif + + needs_reset = setup_coherent_ht_domain(); + +#if CONFIG_LOGICAL_CPUS==1 + // It is said that we should start core1 after all core0 launched + start_other_cores(); +#endif + needs_reset |= ht_setup_chains_x(); + + needs_reset |= ck804_early_setup_x(); + + if (needs_reset) { + print_info("ht reset -\r\n"); + soft_reset(); + } + + enable_smbus(); +#if 0 + dump_spd_registers(&cpu[0]); +#endif +#if 0 + dump_smbus_registers(); +#endif + + memreset_setup(); + sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu); + +#if 0 + dump_pci_devices(); +#endif + +#if 1 + { + /* Check value of esp to verify if we have enough rom for stack in Cache as RAM */ + unsigned v_esp; + __asm__ volatile ( + "movl %%esp, %0\n\t" + : "=a" (v_esp) + ); +#if CONFIG_USE_INIT + printk_debug("v_esp=%08x\r\n", v_esp); +#else + print_debug("v_esp="); print_debug_hex32(v_esp); print_debug("\r\n"); +#endif + } + +#endif + +cpu_reset_x: + +#if CONFIG_USE_INIT + printk_debug("cpu_reset = %08x\r\n",cpu_reset); +#else + print_debug("cpu_reset = "); print_debug_hex32(cpu_reset); print_debug("\r\n"); +#endif + + if(cpu_reset == 0) { + print_debug("Clearing initial memory region: "); + } + print_debug("No cache as ram now - "); + + /* store cpu_reset to ebx */ + __asm__ volatile ( + "movl %0, %%ebx\n\t" + ::"a" (cpu_reset) + ); + + if(cpu_reset==0) { +#define CLEAR_FIRST_1M_RAM 1 +#include "cpu/amd/car/cache_as_ram_post.c" + } + else { +#undef CLEAR_FIRST_1M_RAM +#include "cpu/amd/car/cache_as_ram_post.c" + } + + __asm__ volatile ( + /* set new esp */ /* before _RAMBASE */ + "movl %0, %%ebp\n\t" + "movl %0, %%esp\n\t" + ::"a"( _RAMBASE - 4 ) + ); + + { + unsigned new_cpu_reset; + + /* get back cpu_reset from ebx */ + __asm__ volatile ( + "movl %%ebx, %0\n\t" + :"=a" (new_cpu_reset) + ); + + /* We can not go back any more, we lost old stack data in cache as ram*/ + if(new_cpu_reset==0) { + print_debug("Use Ram as Stack now - done\r\n"); + } else + { + print_debug("Use Ram as Stack now - \r\n"); + } +#if CONFIG_USE_INIT + printk_debug("new_cpu_reset = %08x\r\n", new_cpu_reset); +#else + print_debug("new_cpu_reset = "); print_debug_hex32(new_cpu_reset); print_debug("\r\n"); +#endif + + /*copy and execute linuxbios_ram */ + copy_and_run(new_cpu_reset); + /* We will not return */ + } + + + print_debug("should not be here -\r\n"); + +} diff --git a/src/mainboard/tyan/s2895/Config.lb b/src/mainboard/tyan/s2895/Config.lb index 09448facc8..3bf8508369 100644 --- a/src/mainboard/tyan/s2895/Config.lb +++ b/src/mainboard/tyan/s2895/Config.lb @@ -44,27 +44,46 @@ driver mainboard.o if HAVE_MP_TABLE object mptable.o end if HAVE_PIRQ_TABLE object irq_tables.o end #object reset.o +if USE_DCACHE_RAM -## -## Romcc output -## -makerule ./failover.E - depends "$(MAINBOARD)/failover.c ./romcc" - action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" -end + if CONFIG_USE_INIT + makerule ./auto.o + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o auto.o" + end + else + makerule ./auto.inc + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@" + action "perl -e 's/.rodata/.rom.data/g' -pi $@" + action "perl -e 's/.text/.section .rom.text/g' -pi $@" + end + end -makerule ./failover.inc - depends "$(MAINBOARD)/failover.c ./romcc" - action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" -end +else + ## + ## Romcc output + ## + makerule ./failover.E + depends "$(MAINBOARD)/failover.c ./romcc" + action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" + end + + makerule ./failover.inc + depends "$(MAINBOARD)/failover.c ./romcc" + action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" + end + + makerule ./auto.E + depends "$(MAINBOARD)/auto.c option_table.h ./romcc" + action "./romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" + end + + makerule ./auto.inc + depends "$(MAINBOARD)/auto.c option_table.h ./romcc" + action "./romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" + end -makerule ./auto.E - depends "$(MAINBOARD)/auto.c option_table.h ./romcc" - action "./romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" -end -makerule ./auto.inc - depends "$(MAINBOARD)/auto.c option_table.h ./romcc" - action "./romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" end ## @@ -73,7 +92,16 @@ end mainboardinit cpu/x86/16bit/entry16.inc mainboardinit cpu/x86/32bit/entry32.inc ldscript /cpu/x86/16bit/entry16.lds -ldscript /cpu/x86/32bit/entry32.lds +if USE_DCACHE_RAM + if CONFIG_USE_INIT + ldscript /cpu/x86/32bit/entry32.lds + end + + if CONFIG_USE_INIT + ldscript /cpu/amd/car/cache_as_ram.lds + end +end + ## ## Build our reset vector (This is where linuxBIOS is entered) @@ -86,8 +114,11 @@ else ldscript /cpu/x86/32bit/reset32.lds end -### Should this be in the northbridge code? -mainboardinit arch/i386/lib/cpu_reset.inc +if USE_DCACHE_RAM +else + ### Should this be in the northbridge code? + mainboardinit arch/i386/lib/cpu_reset.inc +end ## ## Include an id string (For safe flashing) @@ -103,29 +134,49 @@ if USE_FALLBACK_IMAGE ldscript /southbridge/nvidia/ck804/romstrap.lds end + + +if USE_DCACHE_RAM + ## + ## Setup Cache-As-Ram + ## + mainboardinit cpu/amd/car/cache_as_ram.inc +end + ### ### This is the early phase of linuxBIOS startup ### Things are delicate and we test to see if we should ### failover to another image. ### if USE_FALLBACK_IMAGE - ldscript /arch/i386/lib/failover.lds - mainboardinit ./failover.inc + ldscript /arch/i386/lib/failover.lds + if USE_DCACHE_RAM + else + mainboardinit ./failover.inc + end end -### -### O.k. We aren't just an intermediary anymore! -### - ## ## Setup RAM ## -mainboardinit cpu/x86/fpu/enable_fpu.inc -mainboardinit cpu/x86/mmx/enable_mmx.inc -mainboardinit cpu/x86/sse/enable_sse.inc -mainboardinit ./auto.inc -mainboardinit cpu/x86/sse/disable_sse.inc -mainboardinit cpu/x86/mmx/disable_mmx.inc +if USE_DCACHE_RAM + + if CONFIG_USE_INIT + initobject auto.o + else + mainboardinit ./auto.inc + end + +else + # ROMCC + mainboardinit cpu/x86/fpu/enable_fpu.inc + mainboardinit cpu/x86/mmx/enable_mmx.inc + mainboardinit cpu/x86/sse/enable_sse.inc + mainboardinit ./auto.inc + mainboardinit cpu/x86/sse/disable_sse.inc + mainboardinit cpu/x86/mmx/disable_mmx.inc + +end ## ## Include the secondary Configuration files diff --git a/src/mainboard/tyan/s2895/Options.lb b/src/mainboard/tyan/s2895/Options.lb index 22812e9a20..e2d220201b 100644 --- a/src/mainboard/tyan/s2895/Options.lb +++ b/src/mainboard/tyan/s2895/Options.lb @@ -59,6 +59,11 @@ uses K8_E0_MEM_HOLE_SIZEK uses CK804_DEVN_BASE +uses USE_DCACHE_RAM +uses DCACHE_RAM_BASE +uses DCACHE_RAM_SIZE +uses CONFIG_USE_INIT + ## ROM_SIZE is the size of boot ROM that this board will use. #512K bytes default ROM_SIZE=524288 @@ -85,9 +90,9 @@ default HAVE_FALLBACK_BOOT=1 ## default HAVE_HARD_RESET=1 -default HARD_RESET_BUS=1 -default HARD_RESET_DEVICE=4 -default HARD_RESET_FUNCTION=0 +#default HARD_RESET_BUS=1 +#default HARD_RESET_DEVICE=4 +#default HARD_RESET_FUNCTION=0 ## ## Build code to export a programmable irq routing table @@ -136,6 +141,14 @@ default CONFIG_CONSOLE_VGA=1 default CONFIG_PCI_ROM_RUN=1 ## +## enable CACHE_AS_RAM specifics +## +default USE_DCACHE_RAM=1 +default DCACHE_RAM_BASE=0xcf000 +default DCACHE_RAM_SIZE=0x1000 +default CONFIG_USE_INIT=1 + +## ## Build code to setup a generic IOAPIC ## default CONFIG_IOAPIC=1 @@ -143,8 +156,8 @@ default CONFIG_IOAPIC=1 ## ## Clean up the motherboard id strings ## -default MAINBOARD_PART_NUMBER="Tyan" -default MAINBOARD_VENDOR="s2895" +default MAINBOARD_PART_NUMBER="s2895" +default MAINBOARD_VENDOR="Tyan" default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2895 @@ -233,7 +246,7 @@ default TTYS0_LCS=0x3 ## SPEW 9 Way too many details ## Request this level of debugging output -default DEFAULT_CONSOLE_LOGLEVEL=7 +default DEFAULT_CONSOLE_LOGLEVEL=8 ## At a maximum only compile in this level of debugging default MAXIMUM_CONSOLE_LOGLEVEL=8 diff --git a/src/mainboard/tyan/s2895/cache_as_ram_auto.c b/src/mainboard/tyan/s2895/cache_as_ram_auto.c new file mode 100644 index 0000000000..dfe11ae546 --- /dev/null +++ b/src/mainboard/tyan/s2895/cache_as_ram_auto.c @@ -0,0 +1,492 @@ +#define ASSEMBLY 1 +#define __ROMCC__ + +#include <stdint.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/romcc_io.h> +#include <cpu/x86/lapic.h> +#include "option_table.h" +#include "pc80/mc146818rtc_early.c" +#include "pc80/serial.c" +#include "arch/i386/lib/console.c" +#include "ram/ramtest.c" + + +#include "northbridge/amd/amdk8/cpu_rev.c" +#define K8_HT_FREQ_1G_SUPPORT 0 +#include "northbridge/amd/amdk8/incoherent_ht.c" +#include "southbridge/nvidia/ck804/ck804_early_smbus.c" +#include "northbridge/amd/amdk8/raminit.h" +#include "cpu/amd/model_fxx/apic_timer.c" +#include "lib/delay.c" + +#if CONFIG_USE_INIT == 0 +#include "lib/memcpy.c" +#endif + +#include "cpu/x86/lapic/boot_cpu.c" +#include "northbridge/amd/amdk8/reset_test.c" +#include "northbridge/amd/amdk8/debug.c" +#include "superio/smsc/lpc47b397/lpc47b397_early_serial.c" + +#include "cpu/amd/mtrr/amd_earlymtrr.c" +#include "cpu/x86/bist.h" + +#include "superio/smsc/lpc47b397/lpc47b397_early_gpio.c" + +#include "northbridge/amd/amdk8/setup_resource_map.c" + +#define SERIAL_DEV PNP_DEV(0x2e, LPC47B397_SP1) + +static void hard_reset(void) +{ + set_bios_reset(); + + /* full reset */ + outb(0x0a, 0x0cf9); + outb(0x0e, 0x0cf9); +} + +static void soft_reset(void) +{ + set_bios_reset(); +#if 1 + /* link reset */ + outb(0x02, 0x0cf9); + outb(0x06, 0x0cf9); +#endif +} + +static void memreset_setup(void) +{ +} + +static void memreset(int controllers, const struct mem_controller *ctrl) +{ +} + +#define SUPERIO_GPIO_DEV PNP_DEV(0x2e, LPC47B397_RT) + +#define SUPERIO_GPIO_IO_BASE 0x400 + +static void sio_gpio_setup(void){ + + unsigned value; + + +#if 1 + /*Enable onboard scsi*/ + lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x2c, (1<<7)|(0<<2)|(0<<1)|(0<<0)); // GP21, offset 0x2c, DISABLE_SCSI_L + value = lpc47b397_gpio_offset_in(SUPERIO_GPIO_IO_BASE, 0x4c); + lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x4c, (value|(1<<1))); +#endif + +} + +static inline void activate_spd_rom(const struct mem_controller *ctrl) +{ + /* nothing to do */ +} + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#define K8_4RANK_DIMM_SUPPORT 1 + +#include "northbridge/amd/amdk8/raminit.c" +#if 0 + #define ENABLE_APIC_EXT_ID 1 + #define APIC_ID_OFFSET 0x10 + #define LIFT_BSP_APIC_ID 0 +#else + #define ENABLE_APIC_EXT_ID 0 +#endif +#include "northbridge/amd/amdk8/coherent_ht.c" +#include "sdram/generic_sdram.c" + + /* tyan does not want the default */ +#include "resourcemap.c" + +#if CONFIG_LOGICAL_CPUS==1 +#define SET_NB_CFG_54 1 +#include "cpu/amd/dualcore/dualcore.c" +#endif + +#define FIRST_CPU 1 +#define SECOND_CPU 1 +#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU) + +#define CK804_NUM 2 +//#define CK804B_BUSN 0x80 +#define CK804B_BUSN 0xc +#define CK804_USE_NIC 1 +#define CK804_USE_ACI 1 + +#include "southbridge/nvidia/ck804/ck804_early_setup_ss.h" + +//set GPIO to input mode +#define CK804_MB_SETUP \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 5, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M9,GPIO6, PCIXB2_PRSNT1_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+15, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M8,GPIO16, PCIXB2_PRSNT2_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+44, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* P5,GPIO45, PCIXA_PRSNT1_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 7, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M5,GPIO8, PCIXA_PRSNT2_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+16, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* K4,GPIO17, PCIXB_PRSNT1_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+45, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* P7,GPIO46, PCIXB_PRSNT2_L*/ + +#include "southbridge/nvidia/ck804/ck804_early_setup.c" + +#include "cpu/amd/car/copy_and_run.c" + +#if USE_FALLBACK_IMAGE == 1 + +#include "southbridge/nvidia/ck804/ck804_enable_rom.c" +#include "northbridge/amd/amdk8/early_ht.c" + + +static void sio_setup(void) +{ + + unsigned value; + uint32_t dword; + uint8_t byte; + + + pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1, 0), 0xac, 0x047f0400); + + byte = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b); + byte |= 0x20; + pci_write_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b, byte); + + dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0); + dword |= (1<<29)|(1<<0); + pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0, dword); + +#if 1 + lpc47b397_enable_serial(SUPERIO_GPIO_DEV, SUPERIO_GPIO_IO_BASE); + + value = lpc47b397_gpio_offset_in(SUPERIO_GPIO_IO_BASE, 0x77); + value &= 0xbf; + lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x77, value); +#endif + +} + +void real_main(unsigned long bist); + +void amd64_main(unsigned long bist) +{ +#if CONFIG_LOGICAL_CPUS==1 + struct node_core_id id; +#else + unsigned nodeid; +#endif + /* Make cerain my local apic is useable */ +// enable_lapic(); + +#if CONFIG_LOGICAL_CPUS==1 + id = get_node_core_id_x(); + /* Is this a cpu only reset? */ + if (cpu_init_detected(id.nodeid)) { +#else +// nodeid = lapicid() & 0xf; + nodeid = get_node_id(); + /* Is this a cpu only reset? */ + if (cpu_init_detected(nodeid)) { +#endif + if (last_boot_normal()) { + goto normal_image; + } else { + goto cpu_reset; + } + } + + /* Is this a secondary cpu? */ + if (!boot_cpu()) { + if (last_boot_normal()) { + goto normal_image; + } else { + goto fallback_image; + } + } + + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + enumerate_ht_chain(); + + sio_setup(); + + /* Setup the ck804 */ + ck804_enable_rom(); + + /* Is this a deliberate reset by the bios */ + if (bios_reset_detected() && last_boot_normal()) { + goto normal_image; + } + /* This is the primary cpu how should I boot? */ + else if (do_normal_boot()) { + goto normal_image; + } + else { + goto fallback_image; + } + normal_image: + __asm__ volatile ("jmp __normal_image" + : /* outputs */ + : "a" (bist) /* inputs */ + ); + cpu_reset: +#if 0 + //CPU reset will reset memtroller ??? + asm volatile ("jmp __cpu_reset" + : /* outputs */ + : "a"(bist) /* inputs */ + ); +#endif + + fallback_image: + real_main(bist); +} +void real_main(unsigned long bist) +#else +void amd64_main(unsigned long bist) +#endif +{ + static const struct mem_controller cpu[] = { +#if FIRST_CPU + { + .node_id = 0, + .f0 = PCI_DEV(0, 0x18, 0), + .f1 = PCI_DEV(0, 0x18, 1), + .f2 = PCI_DEV(0, 0x18, 2), + .f3 = PCI_DEV(0, 0x18, 3), + .channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 }, + .channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 }, + }, +#endif +#if SECOND_CPU + { + .node_id = 1, + .f0 = PCI_DEV(0, 0x19, 0), + .f1 = PCI_DEV(0, 0x19, 1), + .f2 = PCI_DEV(0, 0x19, 2), + .f3 = PCI_DEV(0, 0x19, 3), + .channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 }, + .channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 }, + }, +#endif + }; + + int needs_reset; + + unsigned cpu_reset = 0; + + if (bist == 0) { +#if CONFIG_LOGICAL_CPUS==1 + struct node_core_id id; +#else + unsigned nodeid; +#endif + /* Skip this if there was a built in self test failure */ +// amd_early_mtrr_init(); # don't need, already done in cache_as_ram + +#if CONFIG_LOGICAL_CPUS==1 + set_apicid_cpuid_lo(); + id = get_node_core_id_x(); // that is initid + #if ENABLE_APIC_EXT_ID == 1 + if(id.coreid == 0) { + enable_apic_ext_id(id.nodeid); + } + #endif +#else + nodeid = get_node_id(); + #if ENABLE_APIC_EXT_ID == 1 + enable_apic_ext_id(nodeid); + #endif +#endif + + enable_lapic(); + + init_timer(); + + +#if CONFIG_LOGICAL_CPUS==1 + #if ENABLE_APIC_EXT_ID == 1 + #if LIFT_BSP_APIC_ID == 0 + if( id.nodeid != 0 ) //all except cores in node0 + #endif + lapic_write(LAPIC_ID, ( lapic_read(LAPIC_ID) | (APIC_ID_OFFSET<<24) ) ); + #endif + if(id.coreid == 0) { + if (cpu_init_detected(id.nodeid)) { + cpu_reset = 1; + goto cpu_reset_x; + } + distinguish_cpu_resets(id.nodeid); + } +#else + #if ENABLE_APIC_EXT_ID == 1 + #if LIFT_BSP_APIC_ID == 0 + if(nodeid != 0) + #endif + lapic_write(LAPIC_ID, ( lapic_read(LAPIC_ID) | (APIC_ID_OFFSET<<24) ) ); // CPU apicid is from 0x10 + + #endif + if (cpu_init_detected(nodeid)) { + cpu_reset = 1; + goto cpu_reset_x; + } + distinguish_cpu_resets(nodeid); +#endif + + + if (!boot_cpu() +#if CONFIG_LOGICAL_CPUS==1 + || (id.coreid != 0) +#endif + ) { + // We need stop the CACHE as RAM for this CPU too + #include "cpu/amd/car/cache_as_ram_post.c" + stop_this_cpu(); // it will stop all cores except core0 of cpu0 + } + } + + + lpc47b397_enable_serial(SERIAL_DEV, TTYS0_BASE); + uart_init(); + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + setup_s2895_resource_map(); +#if 0 + dump_pci_device(PCI_DEV(0, 0x18, 0)); + dump_pci_device(PCI_DEV(0, 0x19, 0)); +#endif + + needs_reset = setup_coherent_ht_domain(); + +#if CONFIG_LOGICAL_CPUS==1 + // It is said that we should start core1 after all core0 launched + start_other_cores(); +#endif + +#if CK804B_BUSN == 0x80 + // You need to preset bus num in PCI_DEV(0, 0x18,1) 0xe0, 0xe4, 0xe8, 0xec + needs_reset |= ht_setup_chains(3); +#else + // automatically set that for you, but you might meet tight space + // Bcause it has two Ck804, we need to set CK804B_BUSN to 0xc (ht_setup_chains_x will let second CK804 use that bus num. + // otherwise ck804_eary_setup can not work rightly. + needs_reset |= ht_setup_chains_x(); +#endif + + needs_reset |= ck804_early_setup_x(); + + if (needs_reset) { + print_info("ht reset -\r\n"); + soft_reset(); + } + + enable_smbus(); +#if 0 + dump_spd_registers(&cpu[0]); +#endif +#if 0 + dump_smbus_registers(); +#endif + + memreset_setup(); + sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu); + +#if 0 + dump_pci_devices(); +#endif + +#if 1 + { + /* Check value of esp to verify if we have enough rom for stack in Cache as RAM */ + unsigned v_esp; + __asm__ volatile ( + "movl %%esp, %0\n\t" + : "=a" (v_esp) + ); +#if CONFIG_USE_INIT + printk_debug("v_esp=%08x\r\n", v_esp); +#else + print_debug("v_esp="); print_debug_hex32(v_esp); print_debug("\r\n"); +#endif + } + +#endif + +cpu_reset_x: + +#if CONFIG_USE_INIT + printk_debug("cpu_reset = %08x\r\n",cpu_reset); +#else + print_debug("cpu_reset = "); print_debug_hex32(cpu_reset); print_debug("\r\n"); +#endif + + if(cpu_reset == 0) { + print_debug("Clearing initial memory region: "); + } + print_debug("No cache as ram now - "); + + /* store cpu_reset to ebx */ + __asm__ volatile ( + "movl %0, %%ebx\n\t" + ::"a" (cpu_reset) + ); + + if(cpu_reset==0) { +#define CLEAR_FIRST_1M_RAM 1 +#include "cpu/amd/car/cache_as_ram_post.c" + } + else { +#undef CLEAR_FIRST_1M_RAM +#include "cpu/amd/car/cache_as_ram_post.c" + } + + __asm__ volatile ( + /* set new esp */ /* before _RAMBASE */ + "movl %0, %%ebp\n\t" + "movl %0, %%esp\n\t" + ::"a"( _RAMBASE - 4 ) + ); + + { + unsigned new_cpu_reset; + + /* get back cpu_reset from ebx */ + __asm__ volatile ( + "movl %%ebx, %0\n\t" + :"=a" (new_cpu_reset) + ); + + /* We can not go back any more, we lost old stack data in cache as ram*/ + if(new_cpu_reset==0) { + print_debug("Use Ram as Stack now - done\r\n"); + } else + { + print_debug("Use Ram as Stack now - \r\n"); + } +#if CONFIG_USE_INIT + printk_debug("new_cpu_reset = %08x\r\n", new_cpu_reset); +#else + print_debug("new_cpu_reset = "); print_debug_hex32(new_cpu_reset); print_debug("\r\n"); +#endif + + /*copy and execute linuxbios_ram */ + copy_and_run(new_cpu_reset); + /* We will not return */ + } + + + print_err("should not be here -\r\n"); +} diff --git a/src/mainboard/tyan/s4880/Options.lb b/src/mainboard/tyan/s4880/Options.lb index 4cadb725c4..42284e422d 100644 --- a/src/mainboard/tyan/s4880/Options.lb +++ b/src/mainboard/tyan/s4880/Options.lb @@ -11,6 +11,7 @@ uses HAVE_OPTION_TABLE uses CONFIG_MAX_CPUS uses CONFIG_MAX_PHYSICAL_CPUS uses CONFIG_LOGICAL_CPUS +uses SERIAL_CPU_INIT uses CONFIG_IOAPIC uses CONFIG_SMP uses FALLBACK_SIZE @@ -56,6 +57,8 @@ uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN uses K8_E0_MEM_HOLE_SIZEK +uses CONFIG_USE_INIT + ### ### Build options ### @@ -120,6 +123,9 @@ default CONFIG_MAX_CPUS=4 default CONFIG_MAX_PHYSICAL_CPUS=4 default CONFIG_LOGICAL_CPUS=0 + +#default SERIAL_CPU_INIT=0 + #1G memory hole default K8_E0_MEM_HOLE_SIZEK=0x100000 @@ -135,8 +141,8 @@ default CONFIG_IOAPIC=1 ## ## Clean up the motherboard id strings ## -default MAINBOARD_PART_NUMBER="Tyan" -default MAINBOARD_VENDOR="s4880" +default MAINBOARD_PART_NUMBER="s4880" +default MAINBOARD_VENDOR="Tyan" default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x4880 diff --git a/src/mainboard/tyan/s4882/Config.lb b/src/mainboard/tyan/s4882/Config.lb index 67ee157f6e..95ef0464fe 100644 --- a/src/mainboard/tyan/s4882/Config.lb +++ b/src/mainboard/tyan/s4882/Config.lb @@ -16,6 +16,7 @@ end ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default CONFIG_ROM_STREAM = 1 ## ## Compute where this copy of linuxBIOS will start in the boot rom @@ -34,6 +35,7 @@ default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE ) arch i386 end + ## ## Build the objects we have code for in this directory. ## @@ -42,39 +44,61 @@ driver mainboard.o if HAVE_MP_TABLE object mptable.o end if HAVE_PIRQ_TABLE object irq_tables.o end #object reset.o +if USE_DCACHE_RAM -## -## Romcc output -## -makerule ./failover.E - depends "$(MAINBOARD)/failover.c ./romcc" - action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" -end + if CONFIG_USE_INIT -makerule ./failover.inc - depends "$(MAINBOARD)/failover.c ./romcc" - action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" -end + makerule ./auto.o + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o auto.o" + end -makerule ./auto.E - depends "$(MAINBOARD)/auto.c option_table.h ./romcc" - action "./romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" -end -makerule ./auto.inc - depends "$(MAINBOARD)/auto.c option_table.h ./romcc" - action "./romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" -end + else -## -## Setup RAM -## -mainboardinit cpu/x86/fpu/enable_fpu.inc -mainboardinit cpu/x86/mmx/enable_mmx.inc -mainboardinit cpu/x86/sse/enable_sse.inc -mainboardinit ./auto.inc -mainboardinit cpu/x86/sse/disable_sse.inc -mainboardinit cpu/x86/mmx/disable_mmx.inc -mainboardinit arch/i386/lib/jmp_auto_out.inc + makerule ./auto.inc + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@" + action "perl -e 's/.rodata/.rom.data/g' -pi $@" + action "perl -e 's/.text/.section .rom.text/g' -pi $@" + end + end +else + + ## + ## Romcc output + ## + makerule ./failover.E + depends "$(MAINBOARD)/failover.c ./romcc" + action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" + end + + makerule ./failover.inc + depends "$(MAINBOARD)/failover.c ./romcc" + action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" + end + + makerule ./auto.E + depends "$(MAINBOARD)/auto.c option_table.h ./romcc" + action "./romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" + end + + makerule ./auto.inc + depends "$(MAINBOARD)/auto.c option_table.h ./romcc" + action "./romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" + end + + ## + ## Setup RAM + ## + mainboardinit cpu/x86/fpu/enable_fpu.inc + mainboardinit cpu/x86/mmx/enable_mmx.inc + mainboardinit cpu/x86/sse/enable_sse.inc + mainboardinit ./auto.inc + mainboardinit cpu/x86/sse/disable_sse.inc + mainboardinit cpu/x86/mmx/disable_mmx.inc + mainboardinit arch/i386/lib/jmp_auto_out.inc + +end ## ## Build our 16 bit and 32 bit linuxBIOS entry code @@ -82,7 +106,16 @@ mainboardinit arch/i386/lib/jmp_auto_out.inc mainboardinit cpu/x86/16bit/entry16.inc mainboardinit cpu/x86/32bit/entry32.inc ldscript /cpu/x86/16bit/entry16.lds -ldscript /cpu/x86/32bit/entry32.lds +if USE_DCACHE_RAM + if CONFIG_USE_INIT + ldscript /cpu/x86/32bit/entry32.lds + end + + if CONFIG_USE_INIT + ldscript /cpu/amd/car/cache_as_ram.lds + end +end + ## ## Build our reset vector (This is where linuxBIOS is entered) @@ -95,8 +128,11 @@ else ldscript /cpu/x86/32bit/reset32.lds end -### Should this be in the northbridge code? -mainboardinit arch/i386/lib/cpu_reset.inc +if USE_DCACHE_RAM +else + ### Should this be in the northbridge code? + mainboardinit arch/i386/lib/cpu_reset.inc +end ## ## Include an id string (For safe flashing) @@ -104,27 +140,51 @@ mainboardinit arch/i386/lib/cpu_reset.inc mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds + +if USE_DCACHE_RAM + ## + ## Setup Cache-As-Ram + ## + mainboardinit cpu/amd/car/cache_as_ram.inc +end + ### ### This is the early phase of linuxBIOS startup ### Things are delicate and we test to see if we should ### failover to another image. ### if USE_FALLBACK_IMAGE - ldscript /arch/i386/lib/failover.lds - mainboardinit ./failover.inc + if USE_DCACHE_RAM + ldscript /arch/i386/lib/failover.lds + else + ldscript /arch/i386/lib/failover.lds + mainboardinit ./failover.inc + end end -### -### O.k. We aren't just an intermediary anymore! -### +## +## Setup RAM +## +if USE_DCACHE_RAM + + if CONFIG_USE_INIT + initobject auto.o + else + mainboardinit ./auto.inc + end -mainboardinit arch/i386/lib/jmp_auto.inc +else + + # ROMCC + mainboardinit arch/i386/lib/jmp_auto.inc + +end ## ## Include the secondary Configuration files ## if CONFIG_CHIP_NAME - config chip.h + config chip.h end # sample config for tyan/s4882 diff --git a/src/mainboard/tyan/s4882/Options.lb b/src/mainboard/tyan/s4882/Options.lb index e1a431bde3..56a2548228 100644 --- a/src/mainboard/tyan/s4882/Options.lb +++ b/src/mainboard/tyan/s4882/Options.lb @@ -11,7 +11,6 @@ uses HAVE_OPTION_TABLE uses CONFIG_MAX_CPUS uses CONFIG_MAX_PHYSICAL_CPUS uses CONFIG_LOGICAL_CPUS -uses SERIAL_CPU_INIT uses CONFIG_IOAPIC uses CONFIG_SMP uses FALLBACK_SIZE @@ -48,16 +47,21 @@ uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL uses CONFIG_CONSOLE_SERIAL8250 uses HAVE_INIT_TIMER uses CONFIG_GDB_STUB +uses CONFIG_GDB_STUB uses CROSS_COMPILE uses CC uses HOSTCC uses OBJCOPY uses CONFIG_CHIP_NAME -uses CONFIG_CONSOLE_BTEXT uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN uses K8_E0_MEM_HOLE_SIZEK +uses USE_DCACHE_RAM +uses DCACHE_RAM_BASE +uses DCACHE_RAM_SIZE +uses CONFIG_USE_INIT + ### ### Build options ### @@ -85,7 +89,7 @@ default HAVE_HARD_RESET=1 ## ## Funky hard reset implementation ## -default HARD_RESET_BUS=1 +default HARD_RESET_BUS=3 default HARD_RESET_DEVICE=4 default HARD_RESET_FUNCTION=0 @@ -122,18 +126,25 @@ default CONFIG_MAX_CPUS=8 default CONFIG_MAX_PHYSICAL_CPUS=4 default CONFIG_LOGICAL_CPUS=1 -#default SERIAL_CPU_INIT=0 +#CHIP_NAME ? +default CONFIG_CHIP_NAME=1 #1G memory hole default K8_E0_MEM_HOLE_SIZEK=0x100000 -#BTEXT Console -#default CONFIG_CONSOLE_BTEXT=1 - #VGA Console default CONFIG_CONSOLE_VGA=1 default CONFIG_PCI_ROM_RUN=1 + +## +## enable CACHE_AS_RAM specifics +## +default USE_DCACHE_RAM=1 +default DCACHE_RAM_BASE=0xcf000 +default DCACHE_RAM_SIZE=0x1000 +default CONFIG_USE_INIT=1 + ## ## Build code to setup a generic IOAPIC ## @@ -142,8 +153,8 @@ default CONFIG_IOAPIC=1 ## ## Clean up the motherboard id strings ## -default MAINBOARD_PART_NUMBER="Tyan" -default MAINBOARD_VENDOR="s4882" +default MAINBOARD_PART_NUMBER="s4882" +default MAINBOARD_VENDOR="Tyan" default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x4882 @@ -232,9 +243,9 @@ default TTYS0_LCS=0x3 ## SPEW 9 Way too many details ## Request this level of debugging output -default DEFAULT_CONSOLE_LOGLEVEL=7 +default DEFAULT_CONSOLE_LOGLEVEL=8 ## At a maximum only compile in this level of debugging -default MAXIMUM_CONSOLE_LOGLEVEL=7 +default MAXIMUM_CONSOLE_LOGLEVEL=8 ## ## Select power on after power fail setting diff --git a/src/mainboard/tyan/s4882/cache_as_ram_auto.c b/src/mainboard/tyan/s4882/cache_as_ram_auto.c new file mode 100644 index 0000000000..4e1b8483fc --- /dev/null +++ b/src/mainboard/tyan/s4882/cache_as_ram_auto.c @@ -0,0 +1,457 @@ +#define ASSEMBLY 1 +#define __ROMCC__ + +#include <stdint.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/romcc_io.h> +#include <cpu/x86/lapic.h> +#include "option_table.h" +#include "pc80/mc146818rtc_early.c" +#include "pc80/serial.c" +#include "arch/i386/lib/console.c" +#include "ram/ramtest.c" + +#include "northbridge/amd/amdk8/cpu_rev.c" +#define K8_HT_FREQ_1G_SUPPORT 0 +#include "northbridge/amd/amdk8/incoherent_ht.c" +#include "southbridge/amd/amd8111/amd8111_early_smbus.c" +#include "northbridge/amd/amdk8/raminit.h" +#include "cpu/amd/model_fxx/apic_timer.c" +#include "lib/delay.c" + +#if CONFIG_USE_INIT == 0 +#include "lib/memcpy.c" +#endif + +#include "cpu/x86/lapic/boot_cpu.c" +#include "northbridge/amd/amdk8/reset_test.c" +#include "northbridge/amd/amdk8/debug.c" +#include "superio/winbond/w83627hf/w83627hf_early_serial.c" + +#include "cpu/amd/mtrr/amd_earlymtrr.c" +#include "cpu/x86/bist.h" + +#include "northbridge/amd/amdk8/setup_resource_map.c" + +#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) + +static void hard_reset(void) +{ + set_bios_reset(); + + /* enable cf9 */ + pci_write_config8(PCI_DEV(0, 0x04, 3), 0x41, 0xf1); + /* reset */ + outb(0x0e, 0x0cf9); +} + +static void soft_reset(void) +{ + set_bios_reset(); + pci_write_config8(PCI_DEV(0, 0x04, 0), 0x47, 1); +} + +static void memreset_setup(void) +{ + if (is_cpu_pre_c0()) { + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0 + } + else { + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1 + } + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17); +} + +static void memreset(int controllers, const struct mem_controller *ctrl) +{ + if (is_cpu_pre_c0()) { + udelay(800); + outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1 + udelay(90); + } +} +static inline void activate_spd_rom(const struct mem_controller *ctrl) +{ +#define SMBUS_HUB 0x18 + int ret,i; + unsigned device=(ctrl->channel0[0])>>8; + i=2; + do { + ret = smbus_write_byte(SMBUS_HUB, 0x01, device); + } while ((ret!=0) && (i-->0)); + + smbus_write_byte(SMBUS_HUB, 0x03, 0); +} + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#define K8_4RANK_DIMM_SUPPORT 1 + +#include "northbridge/amd/amdk8/raminit.c" +#if 0 + #define ENABLE_APIC_EXT_ID 1 + #define APIC_ID_OFFSET 0x10 + #define LIFT_BSP_APIC_ID 0 +#else + #define ENABLE_APIC_EXT_ID 0 +#endif +#include "northbridge/amd/amdk8/coherent_ht.c" +#include "sdram/generic_sdram.c" + + /* tyan does not want the default */ +#include "resourcemap.c" + +#if CONFIG_LOGICAL_CPUS==1 +#define SET_NB_CFG_54 1 +#include "cpu/amd/dualcore/dualcore.c" +#endif +#define FIRST_CPU 1 +#define SECOND_CPU 1 + +#define THIRD_CPU 1 +#define FOURTH_CPU 1 + +#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU + THIRD_CPU + FOURTH_CPU) + +#define RC0 ((1<<2)<<8) +#define RC1 ((1<<1)<<8) +#define RC2 ((1<<4)<<8) +#define RC3 ((1<<3)<<8) + +#define DIMM0 0x50 +#define DIMM1 0x51 +#define DIMM2 0x52 +#define DIMM3 0x53 + +#include "cpu/amd/car/copy_and_run.c" + +#if USE_FALLBACK_IMAGE == 1 + +#include "southbridge/amd/amd8111/amd8111_enable_rom.c" +#include "northbridge/amd/amdk8/early_ht.c" + +void real_main(unsigned long bist); + +void amd64_main(unsigned long bist) +{ +#if CONFIG_LOGICAL_CPUS==1 + struct node_core_id id; +#else + unsigned nodeid; +#endif + /* Make cerain my local apic is useable */ +// enable_lapic(); + +#if CONFIG_LOGICAL_CPUS==1 + id = get_node_core_id_x(); + /* Is this a cpu only reset? */ + if (cpu_init_detected(id.nodeid)) { +#else +// nodeid = lapicid(); + nodeid = get_node_id(); + /* Is this a cpu only reset? */ + if (cpu_init_detected(nodeid)) { +#endif + if (last_boot_normal()) { + goto normal_image; + } else { + goto cpu_reset; + } + } + + /* Is this a secondary cpu? */ + if (!boot_cpu()) { + if (last_boot_normal()) { + goto normal_image; + } else { + goto fallback_image; + } + } + + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + enumerate_ht_chain(); + + /* Setup the ck804 */ + amd8111_enable_rom(); + + /* Is this a deliberate reset by the bios */ + if (bios_reset_detected() && last_boot_normal()) { + goto normal_image; + } + /* This is the primary cpu how should I boot? */ + else if (do_normal_boot()) { + goto normal_image; + } + else { + goto fallback_image; + } + normal_image: + __asm__ volatile ("jmp __normal_image" + : /* outputs */ + : "a" (bist) /* inputs */ + ); + cpu_reset: +#if 0 + //CPU reset will reset memtroller ??? + asm volatile ("jmp __cpu_reset" + : /* outputs */ + : "a"(bist) /* inputs */ + ); +#endif + + fallback_image: + real_main(bist); +} +void real_main(unsigned long bist) +#else +void amd64_main(unsigned long bist) +#endif +{ + static const struct mem_controller cpu[] = { +#if FIRST_CPU + { + .node_id = 0, + .f0 = PCI_DEV(0, 0x18, 0), + .f1 = PCI_DEV(0, 0x18, 1), + .f2 = PCI_DEV(0, 0x18, 2), + .f3 = PCI_DEV(0, 0x18, 3), + .channel0 = { RC0|DIMM0, RC0|DIMM2, 0, 0 }, + .channel1 = { RC0|DIMM1, RC0|DIMM3, 0, 0 }, + }, +#endif +#if SECOND_CPU + { + .node_id = 1, + .f0 = PCI_DEV(0, 0x19, 0), + .f1 = PCI_DEV(0, 0x19, 1), + .f2 = PCI_DEV(0, 0x19, 2), + .f3 = PCI_DEV(0, 0x19, 3), + .channel0 = { RC1|DIMM0, RC1|DIMM2 , 0, 0 }, + .channel1 = { RC1|DIMM1, RC1|DIMM3 , 0, 0 }, + + }, +#endif + +#if THIRD_CPU + { + .node_id = 2, + .f0 = PCI_DEV(0, 0x1a, 0), + .f1 = PCI_DEV(0, 0x1a, 1), + .f2 = PCI_DEV(0, 0x1a, 2), + .f3 = PCI_DEV(0, 0x1a, 3), + .channel0 = { RC2|DIMM0, RC2|DIMM2, 0, 0 }, + .channel1 = { RC2|DIMM1, RC2|DIMM3, 0, 0 }, + + }, +#endif +#if FOURTH_CPU + { + .node_id = 3, + .f0 = PCI_DEV(0, 0x1b, 0), + .f1 = PCI_DEV(0, 0x1b, 1), + .f2 = PCI_DEV(0, 0x1b, 2), + .f3 = PCI_DEV(0, 0x1b, 3), + .channel0 = { RC3|DIMM0, RC3|DIMM2, 0, 0 }, + .channel1 = { RC3|DIMM1, RC3|DIMM3, 0, 0 }, + + }, +#endif + }; + + int needs_reset; + unsigned cpu_reset = 0; + + if (bist == 0) { +#if CONFIG_LOGICAL_CPUS==1 + struct node_core_id id; +#else + unsigned nodeid; +#endif + /* Skip this if there was a built in self test failure */ +// amd_early_mtrr_init(); # don't need, already done in cache_as_ram + +#if CONFIG_LOGICAL_CPUS==1 + set_apicid_cpuid_lo(); + id = get_node_core_id_x(); // that is initid + #if ENABLE_APIC_EXT_ID == 1 + if(id.coreid == 0) { + enable_apic_ext_id(id.nodeid); + } + #endif +#else + nodeid = get_node_id(); + #if ENABLE_APIC_EXT_ID == 1 + enable_apic_ext_id(nodeid); + #endif +#endif + + enable_lapic(); + init_timer(); + + +#if CONFIG_LOGICAL_CPUS==1 + #if ENABLE_APIC_EXT_ID == 1 + #if LIFT_BSP_APIC_ID == 0 + if( id.nodeid != 0 ) //all except cores in node0 + #endif + lapic_write(LAPIC_ID, ( lapic_read(LAPIC_ID) | (APIC_ID_OFFSET<<24) ) ); + #endif + if(id.coreid == 0) { + if (cpu_init_detected(id.nodeid)) { + cpu_reset = 1; + goto cpu_reset_x; + } + distinguish_cpu_resets(id.nodeid); + } +#else + #if ENABLE_APIC_EXT_ID == 1 + #if LIFT_BSP_APIC_ID == 0 + if(nodeid != 0) + #endif + lapic_write(LAPIC_ID, ( lapic_read(LAPIC_ID) | (APIC_ID_OFFSET<<24) ) ); // CPU apicid is from 0x10 + + #endif + if (cpu_init_detected(nodeid)) { + cpu_reset = 1; + goto cpu_reset_x; + } + distinguish_cpu_resets(nodeid); +#endif + + + if (!boot_cpu() +#if CONFIG_LOGICAL_CPUS==1 + || (id.coreid != 0) +#endif + ) { + // We need stop the CACHE as RAM for this CPU too + #include "cpu/amd/car/cache_as_ram_post.c" + stop_this_cpu(); // it will stop all cores except core0 of cpu0 + } + } + + + w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); + uart_init(); + console_init(); + + dump_mem(DCACHE_RAM_BASE+DCACHE_RAM_SIZE-0x200, DCACHE_RAM_BASE+DCACHE_RAM_SIZE); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + setup_s4882_resource_map(); +#if 0 + dump_pci_device(PCI_DEV(0, 0x18, 0)); + dump_pci_device(PCI_DEV(0, 0x19, 0)); +#endif + + needs_reset = setup_coherent_ht_domain(); + +#if CONFIG_LOGICAL_CPUS==1 + // It is said that we should start core1 after all core0 launched + start_other_cores(); +#endif + needs_reset |= ht_setup_chains_x(); + + if (needs_reset) { + print_info("ht reset -\r\n"); + soft_reset(); + } + + enable_smbus(); + + memreset_setup(); + sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu); + +#if 1 + { + /* Check value of esp to verify if we have enough rom for stack in Cache as RAM */ + unsigned v_esp; + __asm__ volatile ( + "movl %%esp, %0\n\t" + : "=a" (v_esp) + ); +#if CONFIG_USE_INIT + printk_debug("v_esp=%08x\r\n", v_esp); +#else + print_debug("v_esp="); print_debug_hex32(v_esp); print_debug("\r\n"); +#endif + } +#endif + + + +cpu_reset_x: + +#if CONFIG_USE_INIT + printk_debug("cpu_reset = %08x\r\n",cpu_reset); +#else + print_debug("cpu_reset = "); print_debug_hex32(cpu_reset); print_debug("\r\n"); +#endif + + if(cpu_reset == 0) { + print_debug("Clearing initial memory region: "); + } + print_debug("No cache as ram now - "); + + /* store cpu_reset to ebx */ + __asm__ volatile ( + "movl %0, %%ebx\n\t" + ::"a" (cpu_reset) + ); + + if(cpu_reset==0) { +#define CLEAR_FIRST_1M_RAM 1 +#include "cpu/amd/car/cache_as_ram_post.c" + } + else { +#undef CLEAR_FIRST_1M_RAM +#include "cpu/amd/car/cache_as_ram_post.c" + } + + __asm__ volatile ( + /* set new esp */ /* before _RAMBASE */ + "movl %0, %%ebp\n\t" + "movl %0, %%esp\n\t" + ::"a"( _RAMBASE - 4 ) + ); + + { + unsigned new_cpu_reset; + + /* get back cpu_reset from ebx */ + __asm__ volatile ( + "movl %%ebx, %0\n\t" + :"=a" (new_cpu_reset) + ); + + print_debug("Use Ram as Stack now - "); /* but We can not go back any more, we lost old stack data in cache as ram*/ + if(new_cpu_reset==0) { + print_debug("done\r\n"); + } else + { + print_debug("\r\n"); + } + +#if CONFIG_USE_INIT + printk_debug("new_cpu_reset = %08x\r\n", new_cpu_reset); +#else + print_debug("new_cpu_reset = "); print_debug_hex32(new_cpu_reset); print_debug("\r\n"); +#endif + /*copy and execute linuxbios_ram */ + copy_and_run(new_cpu_reset); + /* We will not return */ + } + + + print_debug("should not be here -\r\n"); + +} |