diff options
Diffstat (limited to 'src/mainboard')
| -rw-r--r-- | src/mainboard/cubietech/cubieboard/bootblock.c | 14 |
1 files changed, 7 insertions, 7 deletions
diff --git a/src/mainboard/cubietech/cubieboard/bootblock.c b/src/mainboard/cubietech/cubieboard/bootblock.c index 360f914aa7..79d00189e8 100644 --- a/src/mainboard/cubietech/cubieboard/bootblock.c +++ b/src/mainboard/cubietech/cubieboard/bootblock.c @@ -38,12 +38,12 @@ static void cubieboard_set_sys_clock(void) struct a10_ccm *ccm = (void *)A1X_CCM_BASE; /* Switch CPU clock to main oscillator */ - write32(CPU_AHB_APB0_DEFAULT, &ccm->cpu_ahb_apb0_cfg); + writel(CPU_AHB_APB0_DEFAULT, &ccm->cpu_ahb_apb0_cfg); /* Configure the PLL1. The value is the same one used by u-boot * P = 1, N = 16, K = 1, M = 1 --> Output = 384 MHz */ - write32(0xa1005000, &ccm->pll1_cfg); + writel(0xa1005000, &ccm->pll1_cfg); /* FIXME: Delay to wait for PLL to lock */ u32 wait = 1000; @@ -53,7 +53,7 @@ static void cubieboard_set_sys_clock(void) reg32 = read32(&ccm->cpu_ahb_apb0_cfg); reg32 &= ~CPU_CLK_SRC_MASK; reg32 |= CPU_CLK_SRC_PLL1; - write32(reg32, &ccm->cpu_ahb_apb0_cfg); + writel(reg32, &ccm->cpu_ahb_apb0_cfg); } static void cubieboard_setup_clocks(void) @@ -62,12 +62,12 @@ static void cubieboard_setup_clocks(void) cubieboard_set_sys_clock(); /* Configure the clock source for APB1. This drives our UART */ - write32(APB1_CLK_SRC_OSC24M | APB1_RAT_N(0) | APB1_RAT_M(0), - &ccm->apb1_clk_div_cfg); + writel(APB1_CLK_SRC_OSC24M | APB1_RAT_N(0) | APB1_RAT_M(0), + &ccm->apb1_clk_div_cfg); /* Configure the clock for SD0 */ - write32(SDx_CLK_GATE | SDx_CLK_SRC_OSC24M | SDx_RAT_EXP_N(0) - | SDx_RAT_M(1), &ccm->sd0_clk_cfg); + writel(SDx_CLK_GATE | SDx_CLK_SRC_OSC24M | SDx_RAT_EXP_N(0) | SDx_RAT_M(1), + &ccm->sd0_clk_cfg); /* Enable clock to SD0 */ a1x_periph_clock_enable(A1X_CLKEN_MMC0); |