2 files changed, 146 insertions, 0 deletions
diff --git a/src/mainboard/google/urara/Kconfig b/src/mainboard/google/urara/Kconfig
index 1386bc8f25..20cd11805e 100644
--- a/src/mainboard/google/urara/Kconfig
+++ b/src/mainboard/google/urara/Kconfig
@@ -40,6 +40,10 @@ config MAINBOARD_PART_NUMBER
 	string
 	default "ImgTec Pistachio Virtual Platform"
 
+config BOOTBLOCK_MAINBOARD_INIT
+	string
+	default "mainboard/google/urara/bootblock.c"
+
 config DRAM_SIZE_MB
 	int
 	default 256
diff --git a/src/mainboard/google/urara/bootblock.c b/src/mainboard/google/urara/bootblock.c
new file mode 100644
index 0000000000..56177da7f4
--- /dev/null
+++ b/src/mainboard/google/urara/bootblock.c
@@ -0,0 +1,142 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2014 Imagination Technologies
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <arch/io.h>
+#include <stdint.h>
+#include <soc/clocks.h>
+#include <console/console.h>
+
+#define GPIO_BIT_EN_ADDR(bank)		(0xB8101C00 + 0x200 + (0x24 * (bank)))
+
+/* MFIO definitions for UART0/1 */
+#define UART1_RXD_MFIO			59
+#define UART1_TXD_MFIO			60
+#define UART0_RXD_MFIO			55
+#define UART0_TXD_MFIO			56
+#define UART0_RTS_MFIO			57
+#define UART0_CTS_MFIO			58
+
+/* MFIO definitions for SPIM */
+#define SPIM1_D0_TXD_MFIO		5
+#define SPIM1_D1_RXD_MFIO		4
+#define SPIM1_MCLK_MFIO			3
+#define SPIM1_D2_MFIO			6
+#define SPIM1_D3_MFIO			7
+#define SPIM1_CS0_MFIO			0
+
+static void uart1_mfio_setup(void)
+{
+	u32 reg, mfio_mask;
+
+	/*
+	 * Disable GPIO for UART1 MFIOs
+	 * All UART MFIOs have MFIO/16 = 3, therefore we use GPIO pad 3
+	 * This is the primary function (0) of these MFIOs and therfore there
+	 * is no need to set up a function number in the corresponding
+	 * function select register.
+	 */
+	reg = read32(GPIO_BIT_EN_ADDR(3));
+	mfio_mask =  1 << (UART1_RXD_MFIO % 16);
+	mfio_mask |= 1 << (UART1_TXD_MFIO % 16);
+	/* Clear relevant bits */
+	reg &= ~mfio_mask;
+	/*
+	 * Set corresponding bits in the upper half word
+	 * in order to be able to modify the chosen pins
+	 */
+	reg |= mfio_mask << 16;
+	write32(GPIO_BIT_EN_ADDR(3), reg);
+}
+
+static void spim1_mfio_setup(void)
+{
+	u32 reg, mfio_mask;
+	/*
+	 * Disable GPIO for SPIM1 MFIOs
+	 * All SPFI1 MFIOs have MFIO/16 = 0, therefore we use GPIO pad 0
+	 * This is the primary function (0) of these MFIOs and therfore there
+	 * is no need to set up a function number in the corresponding
+	 * function select register.
+	 */
+	reg = read32(GPIO_BIT_EN_ADDR(0));
+
+	/* Disable GPIO for UART0 MFIOs */
+	mfio_mask = 1 << (SPIM1_D0_TXD_MFIO % 16);
+	mfio_mask |= 1 << (SPIM1_D1_RXD_MFIO % 16);
+	mfio_mask |= 1 << (SPIM1_MCLK_MFIO % 16);
+	mfio_mask |= 1 << (SPIM1_D2_MFIO % 16);
+	mfio_mask |= 1 << (SPIM1_D3_MFIO % 16);
+
+	/* TODO: for the moment it only sets up CS0 (NOR) */
+	/* There is no need for other CS lines in Coreboot */
+	mfio_mask |= 1 << (SPIM1_CS0_MFIO % 16);
+
+	/* Clear relevant bits */
+	reg &= ~mfio_mask;
+	/*
+	 * Set corresponding bits in the upper half word
+	 * in order to be able to modify the chosen pins
+	 */
+	reg |= mfio_mask << 16;
+	write32(GPIO_BIT_EN_ADDR(0), reg);
+}
+
+static int init_clocks(void)
+{
+	int ret;
+
+	/*
+	 * Set up dividers for peripherals before setting up PLLs
+	 * in order to not over-clock them when enabling PLLs
+	*/
+
+	/* System PLL divided by 2 -> 400 MHz */
+	/* The same frequency will be the input frequency for the SPFI block */
+	system_clk_setup(1);
+	/* System clock divided by 8 -> 50 MHz */
+	ret = usb_clk_setup(7, 2, 7);
+	if (ret != CLOCKS_OK)
+		return ret;
+	/* System PLL divided by 7 divided by 62 -> 1.8433 Mhz */
+	uart1_clk_setup(6, 61);
+
+	/* Setup system PLL at 800 MHz */
+	ret = sys_pll_setup(2, 1);
+	if (ret != CLOCKS_OK)
+		return ret;
+	/* Setup MIPS PLL at 550 MHz */
+	ret = mips_pll_setup(2, 1, 13, 275);
+	if (ret != CLOCKS_OK)
+		return ret;
+	return CLOCKS_OK;
+}
+
+static void bootblock_mainboard_init(void)
+{
+	if (!init_clocks()) {
+		/* Disable GPIO on the peripheral lines */
+		uart1_mfio_setup();
+		printk(BIOS_INFO, "Urara board: UART initialized!\n");
+
+		spim1_mfio_setup();
+	}
+
+}