diff options
Diffstat (limited to 'src/mainboard')
| -rw-r--r-- | src/mainboard/google/rex/variants/karis/overridetree.cb | 838 |
1 files changed, 836 insertions, 2 deletions
diff --git a/src/mainboard/google/rex/variants/karis/overridetree.cb b/src/mainboard/google/rex/variants/karis/overridetree.cb index 6c284b305b..793a46d7c5 100644 --- a/src/mainboard/google/rex/variants/karis/overridetree.cb +++ b/src/mainboard/google/rex/variants/karis/overridetree.cb @@ -1,6 +1,840 @@ +fw_config + field AUDIO 0 3 + option AUDIO_UNKNOWN 0 + option MAX98360_ALC5682I_I2S 1 + option MAX98363_CS42L42_SNDW 2 + end + field CELLULAR 4 5 + option CELLULAR_ABSENT 0 + option CELLULAR_USB 1 + option CELLULAR_PCIE 2 + end + field UFC 6 7 + option UFC_USB 0 + option UFC_MIPI 1 + end + field WFC 8 9 + option WFC_USB 0 + option WFC_MIPI 1 + end + field DB_SD 10 11 + option SD_ABSENT 0 + option SD_GL9755S 1 + end + field DB_USB 12 14 + option USB_UNKNOWN 0 + option USB3_PS8815 1 + option USB4_KB8010 2 + option USB4_ANX7452 3 + option USB4_HAYDEN_BRIDGE 4 + option USB4_ANX7452_V2 5 + end + field FP 15 + option FP_PRESENT 0 + option FP_ABSENT 1 + end + field UWB 16 17 + option UWB_ABSENT 0 + option UWB_BITBANG 1 + option UWB_GSPI1 2 + end + field WIFI 18 + option WIFI_CNVI 0 + option WIFI_PCIE 1 + end + field TOUCHSCREEN 19 + option TOUCHSCREEN_I2C 0 + option TOUCHSCREEN_I2C_SPI 1 + end + field VPU 20 + option VPU_DIS 0 + option VPU_EN 1 + end + field ISH 21 + option ISH_DISABLE 0 + option ISH_ENABLE 1 + end +end + chip soc/intel/meteorlake - device domain 0 on - end + register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC_SKIP)" # USB2_C1 + register "usb2_ports[1]" = "USB2_PORT_TYPE_C(OC0)" # USB2_C0 + register "usb2_ports[4]" = "USB2_PORT_MID(OC_SKIP)" # M.2 WWAN + register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # M.2 Camera + register "usb2_ports[8]" = "USB2_PORT_MID(OC3)" # Type-A Port A0 + register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)" # M.2 Bluetooth + + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC3)" # USB3/2 Type A port A0 + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB3 port for WWAN + + register "tcss_ports[0]" = "TCSS_PORT_DEFAULT(OC0)" + register "tcss_ports[2]" = "TCSS_PORT_DEFAULT(OC_SKIP)" + + # Enable eDP in Port A + register "ddi_port_A_config" = "1" + # Enable HDMI in Port B + register "ddi_port_B_config" = "0" + + # Enable Display Port Configuration + register "ddi_ports_config" = "{ + [DDI_PORT_A] = DDI_ENABLE_HPD, + [DDI_PORT_B] = DDI_ENABLE_HPD | DDI_ENABLE_DDC, + [DDI_PORT_1] = DDI_ENABLE_HPD, + [DDI_PORT_2] = DDI_ENABLE_HPD, + [DDI_PORT_3] = DDI_ENABLE_HPD, + [DDI_PORT_4] = DDI_ENABLE_HPD, + }" + + register "serial_io_gspi_mode" = "{ + [PchSerialIoIndexGSPI0] = PchSerialIoPci, + [PchSerialIoIndexGSPI1] = PchSerialIoPci, + [PchSerialIoIndexGSPI2] = PchSerialIoDisabled, + }" + + register "serial_io_i2c_mode" = "{ + [PchSerialIoIndexI2C0] = PchSerialIoPci, + [PchSerialIoIndexI2C1] = PchSerialIoPci, + [PchSerialIoIndexI2C2] = PchSerialIoDisabled, + [PchSerialIoIndexI2C3] = PchSerialIoPci, + [PchSerialIoIndexI2C4] = PchSerialIoPci, + [PchSerialIoIndexI2C5] = PchSerialIoPci, + }" + + # Intel Common SoC Config + #+-------------------+---------------------------+ + #| Field | Value | + #+-------------------+---------------------------+ + #| I2C0 | Audio and WFC | + #| I2C1 | Touchscreen | + #| I2C3 | Touchpad | + #| I2C4 | cr50 TPM. Early init is | + #| | required to set up a BAR | + #| | for TPM communication | + #| I2C5 | UFC, SAR1, SAR2, HPS | + #+-------------------+---------------------------+ + register "common_soc_config" = "{ + .i2c[0] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 400, + .fall_time_ns = 350, + .data_hold_time_ns = 50, + }, + .i2c[1] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 600, + .fall_time_ns = 400, + .data_hold_time_ns = 50, + }, + .i2c[3] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 600, + .fall_time_ns = 400, + .data_hold_time_ns = 50, + }, + .i2c[4] = { + .early_init = 1, + .speed = I2C_SPEED_FAST, + .rise_time_ns = 550, + .fall_time_ns = 400, + .data_hold_time_ns = 50, + }, + .i2c[5] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 900, + .fall_time_ns = 400, + .data_hold_time_ns = 50, + }, + }" + + device domain 0 on + device ref igpu on + chip drivers/gfx/generic + register "device_count" = "6" + # DDIA for eDP + register "device[0].name" = ""LCD"" + # DDIB for HDMI + register "device[1].name" = ""DD01"" + # TCP0 (DP-1) for port C0 + register "device[2].name" = ""DD02"" + register "device[2].use_pld" = "true" + register "device[2].pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(1, 1))" + # TCP1 (DP-2) unused + register "device[3].name" = ""DD03"" + # TCP2 (DP-3) for port C1 + register "device[4].name" = ""DD04"" + register "device[4].use_pld" = "true" + register "device[4].pld" = "ACPI_PLD_TYPE_C(RIGHT, LEFT, ACPI_PLD_GROUP(2, 1))" + # TCP3 (DP-4) unused + register "device[5].name" = ""DD05"" + device generic 0 on end + end + end # Integrated Graphics Device + device ref dtt on + chip drivers/intel/dptf + ## sensor information + register "options.tsr[0].desc" = ""DDR_SOC"" + register "options.tsr[1].desc" = ""Ambient"" + register "options.tsr[2].desc" = ""Charger"" + register "options.tsr[3].desc" = ""wwan"" + + ## Active Policy + # FIXME: below values are initial reference values only + register "policies.active" = "{ + [0] = { + .target = DPTF_TEMP_SENSOR_0, + .thresholds = { + TEMP_PCT(75, 90), + TEMP_PCT(70, 80), + TEMP_PCT(65, 70), + TEMP_PCT(60, 60), + TEMP_PCT(55, 50), + TEMP_PCT(50, 40), + TEMP_PCT(45, 30), + } + }, + [1] = { + .target = DPTF_TEMP_SENSOR_1, + .thresholds = { + TEMP_PCT(75, 90), + TEMP_PCT(70, 80), + TEMP_PCT(65, 70), + TEMP_PCT(60, 60), + TEMP_PCT(55, 50), + TEMP_PCT(50, 40), + TEMP_PCT(45, 30), + } + }, + [2] = { + .target = DPTF_TEMP_SENSOR_2, + .thresholds = { + TEMP_PCT(75, 90), + TEMP_PCT(70, 80), + TEMP_PCT(65, 70), + TEMP_PCT(60, 50), + } + }, + [3] = { + .target = DPTF_TEMP_SENSOR_3, + .thresholds = { + TEMP_PCT(75, 90), + TEMP_PCT(70, 80), + TEMP_PCT(65, 70), + TEMP_PCT(60, 60), + TEMP_PCT(55, 50), + TEMP_PCT(50, 40), + TEMP_PCT(45, 30), + } + } + }" + + ## Passive Policy + # TODO: below values are initial reference values only + register "policies.passive" = "{ + [0] = DPTF_PASSIVE(CPU, CPU, 95, 5000), + [1] = DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 80, 5000), + [2] = DPTF_PASSIVE(CPU, TEMP_SENSOR_1, 80, 5000), + [3] = DPTF_PASSIVE(CHARGER, TEMP_SENSOR_2, 75, 5000), + [4] = DPTF_PASSIVE(CPU, TEMP_SENSOR_3, 80, 5000), + }" + + ## Critical Policy + # TODO: below values are initial reference values only + register "policies.critical" = "{ + [0] = DPTF_CRITICAL(CPU, 105, SHUTDOWN), + [1] = DPTF_CRITICAL(TEMP_SENSOR_0, 85, SHUTDOWN), + [2] = DPTF_CRITICAL(TEMP_SENSOR_1, 85, SHUTDOWN), + [3] = DPTF_CRITICAL(TEMP_SENSOR_2, 85, SHUTDOWN), + [4] = DPTF_CRITICAL(TEMP_SENSOR_3, 85, SHUTDOWN), + }" + + ## Power Limits Control + register "controls.power_limits" = "{ + .pl1 = { + .min_power = 15000, + .max_power = 15000, + .time_window_min = 28 * MSECS_PER_SEC, + .time_window_max = 32 * MSECS_PER_SEC, + .granularity = 200, + }, + .pl2 = { + .min_power = 57000, + .max_power = 57000, + .time_window_min = 28 * MSECS_PER_SEC, + .time_window_max = 32 * MSECS_PER_SEC, + .granularity = 1000, + } + }" + + ## Charger Performance Control (Control, mA) + register "controls.charger_perf" = "{ + [0] = { 255, 3000 }, + [1] = { 24, 1500 }, + [2] = { 16, 1000 }, + [3] = { 8, 500 } + }" + + ## Fan Performance Control (Percent, Speed, Noise, Power) + register "controls.fan_perf" = "{ + [0] = { 90, 6700, 220, 2200, }, + [1] = { 80, 5800, 180, 1800, }, + [2] = { 70, 5000, 145, 1450, }, + [3] = { 60, 4900, 115, 1150, }, + [4] = { 50, 3838, 90, 900, }, + [5] = { 40, 2904, 55, 550, }, + [6] = { 30, 2337, 30, 300, }, + [7] = { 20, 1608, 15, 150, }, + [8] = { 10, 800, 10, 100, }, + [9] = { 0, 0, 0, 50, } + }" + + ## Fan options + register "options.fan.fine_grained_control" = "1" + register "options.fan.step_size" = "2" + + device generic 0 alias dptf_policy on end + end + end + device ref pcie_rp9 on + # Enable SSD Card PCIE 9 using clk 4 + register "pcie_rp[PCH_RP(9)]" = "{ + .clk_src = 4, + .clk_req = 4, + .flags = PCIE_RP_LTR | PCIE_RP_AER, + }" + end #PCIE9 SSD card + device ref ish on + probe ISH ISH_ENABLE + chip drivers/intel/ish + register "firmware_name" = ""rex_ish.bin"" + device generic 0 on end + end + end + device ref tbt_pcie_rp0 on end + device ref tbt_pcie_rp2 on end + device ref vpu on + probe VPU VPU_EN + end + device ref tcss_xhci on + chip drivers/usb/acpi + device ref tcss_root_hub on + chip drivers/usb/acpi + register "desc" = ""USB3 Type-C Port C0 (MLB)"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(1, 1))" + device ref tcss_usb3_port0 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-C Port C1 (DB)"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, LEFT, ACPI_PLD_GROUP(2, 1))" + device ref tcss_usb3_port2 on end + end + end + end + end + device ref tcss_dma0 on + chip drivers/intel/usb4/retimer + register "dfp[0].power_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B22)" + use tcss_usb3_port0 as dfp[0].typec_port + device generic 0 on end + end + end + device ref tcss_dma1 on + chip drivers/intel/usb4/retimer + register "dfp[0].power_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B22)" + use tcss_usb3_port2 as dfp[0].typec_port + device generic 0 on end + end + end + device ref xhci on + chip drivers/usb/acpi + device ref xhci_root_hub on + chip drivers/usb/acpi + register "desc" = ""USB2 Type-C Port C1 (DB)"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, LEFT, ACPI_PLD_GROUP(2, 1))" + device ref usb2_port1 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-C Port C0 (MLB)"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(1, 1))" + device ref usb2_port2 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 WWAN"" + register "type" = "UPC_TYPE_INTERNAL" + device ref usb2_port5 on + probe CELLULAR CELLULAR_USB + end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Camera"" + register "type" = "UPC_TYPE_INTERNAL" + register "has_power_resource" = "1" + register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B09)" + device ref usb2_port6 on + probe UFC UFC_USB + end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Port A0 (DB)"" + register "type" = "UPC_TYPE_A" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, RIGHT, ACPI_PLD_GROUP(3, 1))" + device ref usb2_port9 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Bluetooth"" + register "type" = "UPC_TYPE_INTERNAL" + register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_B01)" + device ref usb2_port10 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Port A0 (DB)"" + register "type" = "UPC_TYPE_USB3_A" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, RIGHT, ACPI_PLD_GROUP(3, 1))" + device ref usb3_port1 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 WWAN"" + register "type" = "UPC_TYPE_INTERNAL" + device ref usb3_port2 on + probe CELLULAR CELLULAR_USB + end + end + end + end + end + device ref cnvi_wifi on + chip drivers/wifi/generic + register "wake" = "GPE0_PME_B0" + register "add_acpi_dma_property" = "true" + register "enable_cnvi_ddr_rfim" = "true" + device generic 0 on + probe WIFI WIFI_CNVI + end + end + end + device ref ipu on + chip drivers/intel/mipi_camera + register "acpi_uid" = "0x50000" + register "acpi_name" = ""IPU0"" + register "device_type" = "INTEL_ACPI_CAMERA_CIO2" + + register "cio2_num_ports" = "2" + register "cio2_lanes_used" = "{4,2}" # 4 and 2 CSI Camera lanes are used + register "cio2_lane_endpoint[0]" = ""^I2C0.CAM0"" + register "cio2_lane_endpoint[1]" = ""^I2C5.CAM1"" + register "cio2_prt[0]" = "4" + register "cio2_prt[1]" = "0" + + device generic 0 on + probe UFC UFC_MIPI + probe WFC WFC_MIPI + end + end + end + device ref i2c0 on + chip drivers/i2c/generic + register "hid" = ""RTL5682"" + register "name" = ""RT58"" + register "desc" = ""Headset Codec"" + register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_B06)" + # Set the jd_src to RT5668_JD1 for jack detection + register "property_count" = "1" + register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER" + register "property_list[0].name" = ""realtek,jd-src"" + register "property_list[0].integer" = "1" + device i2c 1a on + probe AUDIO MAX98360_ALC5682I_I2S + end + end + chip drivers/intel/mipi_camera + register "acpi_hid" = ""OVTIDB10"" + register "acpi_uid" = "0" + register "acpi_name" = ""CAM0"" + register "chip_name" = ""Ov 13b10 Camera"" + register "device_type" = "INTEL_ACPI_CAMERA_SENSOR" + + register "ssdb.lanes_used" = "4" + register "ssdb.link_used" = "0" + register "ssdb.vcm_type" = "0x0C" + register "vcm_name" = ""VCM0"" + register "num_freq_entries" = "1" + register "link_freq[0]" = "560 * MHz" # 560 MHz + register "remote_name" = ""IPU0"" + register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD" + + register "has_power_resource" = "1" + #Controls + register "clk_panel.clks[0].clknum" = "1" # IMGCLKOUT_1 + register "clk_panel.clks[0].freq" = "1" # FREQ_19_2_MHZ + + register "gpio_panel.gpio[0].gpio_num" = "GPP_C03" #EN_WCAM_SENR_PWR + register "gpio_panel.gpio[1].gpio_num" = "GPP_C04" #EN_WCAM_PWR + register "gpio_panel.gpio[2].gpio_num" = "GPP_V22" #WCAM_RST_L + + #_ON + register "on_seq.ops_cnt" = "5" + register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)" + register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 0)" + register "on_seq.ops[2]" = "SEQ_OPS_GPIO_ENABLE(1, 0)" + register "on_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(2, 0)" + register "on_seq.ops[4]" = "SEQ_OPS_GPIO_ENABLE(2, 10)" + + #_OFF + register "off_seq.ops_cnt" = "4" + register "off_seq.ops[0]" = "SEQ_OPS_CLK_DISABLE(0, 0)" + register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(2, 0)" + register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 0)" + register "off_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" + + device i2c 36 on + probe WFC WFC_MIPI + end + end + chip drivers/intel/mipi_camera + register "acpi_uid" = "2" + register "acpi_name" = ""VCM0"" + register "chip_name" = ""DW9714 VCM"" + register "device_type" = "INTEL_ACPI_CAMERA_VCM" + + register "vcm_compat" = ""dongwoon,dw9714"" + + register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D0" + + register "has_power_resource" = "1" + + #Controls + register "gpio_panel.gpio[0].gpio_num" = "GPP_C04" #EN_WCAM_PWR + + #_ON + register "on_seq.ops_cnt" = "1" + register "on_seq.ops[0]" = "SEQ_OPS_GPIO_ENABLE(0, 0)" + + #_OFF + register "off_seq.ops_cnt" = "1" + register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" + + device i2c 0C on + probe WFC WFC_MIPI + end + end + chip drivers/intel/mipi_camera + register "acpi_uid" = "1" + register "acpi_name" = ""NVM0"" + register "chip_name" = ""ST M24C64X"" + register "device_type" = "INTEL_ACPI_CAMERA_NVM" + + register "nvm_compat" = ""atmel,24c64"" + + register "nvm_size" = "0x2000" + register "nvm_pagesize" = "0x01" + register "nvm_readonly" = "0x01" + register "nvm_width" = "0x10" + + register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D0" + + register "has_power_resource" = "1" + + #Controls + register "gpio_panel.gpio[0].gpio_num" = "GPP_C04" #EN_WCAM_PWR + + #_ON + register "on_seq.ops_cnt" = "1" + register "on_seq.ops[0]" = "SEQ_OPS_GPIO_ENABLE(0, 0)" + + #_OFF + register "off_seq.ops_cnt" = "1" + register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" + + device i2c 50 on + probe WFC WFC_MIPI + end + end + end #I2C0 + device ref i2c1 on + chip drivers/i2c/hid + register "generic.hid" = ""ELAN6918"" + register "generic.desc" = ""ELAN Touchscreen"" + register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C07_IRQ)" + register "generic.probed" = "1" + register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C01)" + register "generic.reset_delay_ms" = "20" + register "generic.reset_off_delay_ms" = "2" + register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C00)" + register "generic.enable_delay_ms" = "1" + register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C06)" + register "generic.stop_off_delay_ms" = "2" + register "generic.has_power_resource" = "1" + register "hid_desc_reg_offset" = "0x01" + device i2c 10 on + probe TOUCHSCREEN TOUCHSCREEN_I2C + end + end + chip drivers/generic/gpio_keys + register "name" = ""PENH"" + # GPP_E04 is the IRQ source + register "gpio" = "ACPI_GPIO_INPUT_ACTIVE_LOW(GPP_E04)" + register "key.dev_name" = ""EJCT"" + register "key.linux_code" = "SW_PEN_INSERTED" + register "key.linux_input_type" = "EV_SW" + register "key.label" = ""pen_eject"" + device generic 0 on end + end + end + device ref i2c2 on end + device ref i2c3 on + chip drivers/i2c/generic + register "hid" = ""ELAN0000"" + register "desc" = ""ELAN Touchpad"" + register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_B00_IRQ)" + register "wake" = "GPE0_DW0_00" + register "detect" = "1" + device i2c 15 on end + end + end + device ref i2c4 on + chip drivers/i2c/tpm + register "hid" = ""GOOG0005"" + register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E03_IRQ)" + device i2c 50 on end + end + end + device ref i2c5 on + chip drivers/intel/mipi_camera + register "acpi_hid" = ""INT3537"" + register "acpi_uid" = "0" + register "acpi_name" = ""CAM1"" + register "chip_name" = ""Hi-556 Camera"" + register "device_type" = "INTEL_ACPI_CAMERA_SENSOR" + register "has_power_resource" = "1" + + register "ssdb.lanes_used" = "2" + register "ssdb.link_used" = "1" + register "num_freq_entries" = "1" + register "link_freq[0]" = "437 * MHz" + register "remote_name" = ""IPU0"" + register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD" + + #Controls + register "gpio_panel.gpio[0].gpio_num" = "GPP_A11" #EN_UCAM_SENR_PWR + register "gpio_panel.gpio[1].gpio_num" = "GPP_B09" #EN_FCAM_PWR + register "gpio_panel.gpio[2].gpio_num" = "GPP_V23" #UCAM_RST_L + register "clk_panel.clks[0].clknum" = "IMGCLKOUT_3" + register "clk_panel.clks[0].freq" = "FREQ_19_2_MHZ" + + #_ON + register "on_seq.ops_cnt" = "5" + register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)" + register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 5)" + register "on_seq.ops[2]" = "SEQ_OPS_GPIO_ENABLE(1, 5)" + register "on_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(2, 5)" + register "on_seq.ops[4]" = "SEQ_OPS_GPIO_ENABLE(2, 5)" + + #_OFF + register "off_seq.ops_cnt" = "4" + register "off_seq.ops[0]" = "SEQ_OPS_CLK_DISABLE(0, 0)" + register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(2, 0)" + register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 0)" + register "off_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" + device i2c 20 on + probe UFC UFC_MIPI + end + end + chip drivers/intel/mipi_camera + register "acpi_hid" = "ACPI_DT_NAMESPACE_HID" + register "acpi_uid" = "1" + register "acpi_name" = ""NVM1"" + register "chip_name" = ""ST M24C64X"" + register "device_type" = "INTEL_ACPI_CAMERA_NVM" + + register "nvm_size" = "0x2000" + register "nvm_pagesize" = "1" + register "nvm_readonly" = "1" + register "nvm_width" = "0x10" + register "nvm_compat" = ""atmel,24c64"" + + register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D0" + + register "has_power_resource" = "1" + + #Controls + register "gpio_panel.gpio[0].gpio_num" = "GPP_B09" #EN_FCAM_PWR + + #_ON + register "on_seq.ops_cnt" = "1" + register "on_seq.ops[0]" = "SEQ_OPS_GPIO_ENABLE(0, 0)" + + #_OFF + register "off_seq.ops_cnt" = "1" + register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" + device i2c 50 on + probe UFC UFC_MIPI + end + end + end #I2C5 + device ref pcie_rp5 on + probe WIFI WIFI_PCIE + # Enable WLAN Card PCIE 5 using clk 5 + register "pcie_rp[PCH_RP(5)]" = "{ + .clk_src = 5, + .clk_req = 5, + .flags = PCIE_RP_HOTPLUG | PCIE_RP_LTR | PCIE_RP_AER, + }" + chip drivers/wifi/generic + register "wake" = "GPE0_DW2_09" + register "add_acpi_dma_property" = "true" + device pci 00.0 on + probe WIFI WIFI_PCIE + end + end + chip soc/intel/common/block/pcie/rtd3 + register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E22)" + register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_F08)" + register "srcclk_pin" = "5" + device generic 0 on + probe WIFI WIFI_PCIE + end + end + end #PCIE5 WLAN card + device ref pcie_rp6 on + probe CELLULAR CELLULAR_PCIE + # Enable WWAN Card PCIE 6 using clk 3 + register "pcie_rp[PCH_RP(6)]" = "{ + .clk_src = 3, + .clk_req = 3, + .flags = PCIE_RP_HOTPLUG | PCIE_RP_LTR | PCIE_RP_AER, + }" + chip soc/intel/common/block/pcie/rtd3 + register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C05)" + register "reset_off_delay_ms" = "20" + register "srcclk_pin" = "3" + register "ext_pm_support" = "ACPI_PCIE_RP_EMIT_ALL" + register "skip_on_off_support" = "true" + device generic 0 alias rp6_rtd3 on + probe CELLULAR CELLULAR_PCIE + end + end + chip drivers/wwan/fm + register "fcpo_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_E07)" + register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A15)" + register "perst_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C05)" + register "wake_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_F10)" + register "add_acpi_dma_property" = "true" + use rp6_rtd3 as rtd3dev + device generic 0 alias rp6_wwan on + probe CELLULAR CELLULAR_PCIE + end + end + end #PCIE6 WWAN card + device ref pcie_rp7 on + # Enable SD Card PCIE 7 using clk 2 + register "pcie_rp[PCH_RP(7)]" = "{ + .clk_src = 2, + .clk_req = 2, + .flags = PCIE_RP_HOTPLUG | PCIE_RP_LTR | PCIE_RP_AER, + }" + chip soc/intel/common/block/pcie/rtd3 + register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D03)" + register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D02)" + register "srcclk_pin" = "2" + device generic 0 on end + end + probe DB_SD SD_GL9755S + end + device ref gspi0 on + probe TOUCHSCREEN TOUCHSCREEN_I2C_SPI + end + device ref gspi1 on + chip drivers/spi/acpi + register "name" = ""CRFP"" + register "hid" = "ACPI_DT_NAMESPACE_HID" + register "uid" = "1" + register "compat_string" = ""google,cros-ec-spi"" + register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_E10_IRQ)" + register "wake" = "GPE0_DW1_10" + register "has_power_resource" = "1" + register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C23)" + register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B11)" + register "enable_delay_ms" = "3" + device spi 0 on end + end # FPMCU + end + device ref soc_espi on + chip ec/google/chromeec + use conn0 as mux_conn[0] + use conn1 as mux_conn[1] + device pnp 0c09.0 on end + end + end + device ref pmc hidden + chip drivers/intel/pmc_mux + device generic 0 on + chip drivers/intel/pmc_mux/conn + use usb2_port2 as usb2_port + use tcss_usb3_port0 as usb3_port + device generic 0 alias conn0 on end + end + chip drivers/intel/pmc_mux/conn + use usb2_port1 as usb2_port + use tcss_usb3_port2 as usb3_port + device generic 1 alias conn1 on end + end + end + end + end + device ref hda on + chip drivers/generic/max98357a + register "hid" = ""MX98360A"" + register "sdmode_gpio" = + "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D04)" + register "sdmode_delay" = "5" + device generic 0 on + probe AUDIO MAX98360_ALC5682I_I2S + end + end + chip drivers/intel/soundwire + device generic 0 on + probe AUDIO MAX98363_CS42L42_SNDW + chip drivers/soundwire/cs42l42 + # SoundWire Link 0 ID 0 + register "desc" = ""Headset Codec"" + register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B07)" + register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_B06)" + register "ts_inv" = "true" + register "ts_dbnc_rise" = "RISE_DEB_1000_MS" + register "ts_dbnc_fall" = "FALL_DEB_0_MS" + register "btn_det_init_dbnce" = "100" + register "btn_det_event_dbnce" = "10" + register "bias_lvls[0]" = "15" + register "bias_lvls[1]" = "8" + register "bias_lvls[2]" = "4" + register "bias_lvls[3]" = "1" + register "hs_bias_ramp_rate" = "HSBIAS_RAMP_SLOW" + register "hs_bias_sense_disable" = "true" + device generic 0.0 on end + end + chip drivers/soundwire/max98363 + # SoundWire Link 2 ID 0 + register "desc" = ""Left Speaker Amp"" + device generic 2.0 on end + end + chip drivers/soundwire/max98363 + # SoundWire Link 2 ID 1 + register "desc" = ""Right Speaker Amp"" + device generic 2.1 on end + end + end + end + end + end end |