summaryrefslogtreecommitdiff
path: root/src/mainboard
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard')
-rw-r--r--src/mainboard/tyan/s2891/Config.lb12
-rw-r--r--src/mainboard/tyan/s2891/Options.lb32
-rw-r--r--src/mainboard/tyan/s2891/acpi_tables.c180
-rw-r--r--src/mainboard/tyan/s2891/dsdt.dsl280
-rw-r--r--src/mainboard/tyan/s2891/mainboard.c16
-rw-r--r--src/mainboard/tyan/s2891/mptable.c5
-rw-r--r--src/mainboard/tyan/s2892/Config.lb15
-rw-r--r--src/mainboard/tyan/s2892/Options.lb32
-rw-r--r--src/mainboard/tyan/s2892/acpi_tables.c180
-rw-r--r--src/mainboard/tyan/s2892/dsdt.dsl293
-rw-r--r--src/mainboard/tyan/s2892/mainboard.c16
-rw-r--r--src/mainboard/tyan/s2892/mptable.c7
-rw-r--r--src/mainboard/tyan/s2895/Config.lb18
-rw-r--r--src/mainboard/tyan/s2895/Options.lb32
-rw-r--r--src/mainboard/tyan/s2895/acpi_tables.c191
-rw-r--r--src/mainboard/tyan/s2895/dsdt.dsl344
-rw-r--r--src/mainboard/tyan/s2895/mainboard.c16
-rw-r--r--src/mainboard/tyan/s2895/mptable.c8
18 files changed, 1648 insertions, 29 deletions
diff --git a/src/mainboard/tyan/s2891/Config.lb b/src/mainboard/tyan/s2891/Config.lb
index 21263b99b9..476872404e 100644
--- a/src/mainboard/tyan/s2891/Config.lb
+++ b/src/mainboard/tyan/s2891/Config.lb
@@ -51,6 +51,18 @@ if HAVE_MP_TABLE object mptable.o end
if HAVE_PIRQ_TABLE object irq_tables.o end
#object reset.o
+if HAVE_ACPI_TABLES
+ object acpi_tables.o
+ makerule dsdt.c
+ depends "$(MAINBOARD)/dsdt.dsl"
+ action "iasl -p $(PWD)/dsdt -tc $(MAINBOARD)/dsdt.dsl"
+ action "mv dsdt.hex dsdt.c"
+ end
+ object ./dsdt.o
+ #./ssdt.o is moved to northbridge/amd/amdk8/Config.lb
+ #./fadt.o is moved to southbridge/nvidia/ck804/Config.lb
+end
+
if USE_DCACHE_RAM
if CONFIG_USE_INIT
diff --git a/src/mainboard/tyan/s2891/Options.lb b/src/mainboard/tyan/s2891/Options.lb
index fa38f84a0b..d8ffb3d11c 100644
--- a/src/mainboard/tyan/s2891/Options.lb
+++ b/src/mainboard/tyan/s2891/Options.lb
@@ -30,6 +30,12 @@ uses USE_OPTION_TABLE
uses LB_CKS_RANGE_START
uses LB_CKS_RANGE_END
uses LB_CKS_LOC
+uses HAVE_ACPI_TABLES
+uses HAVE_MAINBOARD_RESOURCES
+uses HAVE_HIGH_TABLES
+uses HAVE_LOW_TABLES
+uses CONFIG_MULTIBOOT
+uses HAVE_SMI_HANDLER
uses MAINBOARD
uses MAINBOARD_PART_NUMBER
uses MAINBOARD_VENDOR
@@ -54,6 +60,7 @@ uses HAVE_INIT_TIMER
uses CONFIG_GDB_STUB
uses CONFIG_CHIP_NAME
uses CONFIG_CONSOLE_VGA
+uses CONFIG_VGA_ROM_RUN
uses CONFIG_PCI_ROM_RUN
uses HW_MEM_HOLE_SIZEK
@@ -77,11 +84,7 @@ uses SB_HT_CHAIN_UNITID_OFFSET_ONLY
uses CONFIG_LB_MEM_TOPK
## ROM_SIZE is the size of boot ROM that this board will use.
-#512K bytes
-default ROM_SIZE=524288
-
-#1M bytes
-#default ROM_SIZE=1048576
+default ROM_SIZE=512*1024
##
## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
@@ -105,6 +108,11 @@ default HAVE_FALLBACK_BOOT=1
default HAVE_HARD_RESET=1
##
+## Build SMI handler
+##
+default HAVE_SMI_HANDLER=0
+
+##
## Build code to export a programmable irq routing table
##
default HAVE_PIRQ_TABLE=1
@@ -117,6 +125,15 @@ default IRQ_SLOT_COUNT=11
default HAVE_MP_TABLE=1
##
+## Build code to provide ACPI support
+##
+default HAVE_ACPI_TABLES=1
+default HAVE_LOW_TABLES=1
+default HAVE_MAINBOARD_RESOURCES=1
+default HAVE_HIGH_TABLES=0
+default CONFIG_MULTIBOOT=0
+
+##
## Build code to export a CMOS option table
##
default HAVE_OPTION_TABLE=1
@@ -128,6 +145,11 @@ default LB_CKS_RANGE_START=49
default LB_CKS_RANGE_END=122
default LB_CKS_LOC=123
+#VGA Console
+default CONFIG_CONSOLE_VGA=1
+default CONFIG_PCI_ROM_RUN=1
+default CONFIG_VGA_ROM_RUN=1
+
##
## Build code for SMP support
## Only worry about 2 micro processors
diff --git a/src/mainboard/tyan/s2891/acpi_tables.c b/src/mainboard/tyan/s2891/acpi_tables.c
new file mode 100644
index 0000000000..cc3b5c2364
--- /dev/null
+++ b/src/mainboard/tyan/s2891/acpi_tables.c
@@ -0,0 +1,180 @@
+/*
+ * Island Aruma ACPI support
+ * written by Stefan Reinauer <stepan@openbios.org>
+ * (C) 2005 Stefan Reinauer
+ *
+ *
+ * Copyright 2005 AMD
+ * 2005.9 yhlu modify that to more dynamic for AMD Opteron Based MB
+ */
+
+#include <console/console.h>
+#include <string.h>
+#include <arch/acpi.h>
+#include <arch/smp/mpspec.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <cpu/x86/msr.h>
+#include <cpu/amd/mtrr.h>
+#include <cpu/amd/amdk8_sysconf.h>
+#include <../../../northbridge/amd/amdk8/amdk8_acpi.h>
+#include <cpu/amd/model_fxx_powernow.h>
+
+extern unsigned char AmlCode[];
+
+unsigned long acpi_fill_mcfg(unsigned long current)
+{
+ return current;
+}
+
+/* APIC */
+unsigned long acpi_fill_madt(unsigned long current)
+{
+ unsigned long apic_addr;
+ device_t dev;
+
+ /* create all subtables for processors */
+ current = acpi_create_madt_lapics(current);
+
+ /* Write NVIDIA CK804 IOAPIC. */
+ dev = dev_find_slot(0x0, PCI_DEVFN(0x1,0));
+ if (dev) {
+ apic_addr = pci_read_config32(dev, PCI_BASE_ADDRESS_1) & ~0xf;
+ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 4,
+ apic_addr, 0);
+ }
+
+ /* Write AMD 8131 two IOAPICs. */
+ dev = dev_find_slot(0x40, PCI_DEVFN(0x0,1));
+ if (dev) {
+ apic_addr = pci_read_config32(dev, PCI_BASE_ADDRESS_0) & ~0xf;
+ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 5,
+ apic_addr, 0x18);
+ }
+
+ dev = dev_find_slot(0x40, PCI_DEVFN(0x1, 1));
+ if (dev) {
+ apic_addr = pci_read_config32(dev, PCI_BASE_ADDRESS_0) & ~0xf;
+ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 6,
+ apic_addr, 0x1C);
+ }
+
+ /* IRQ9 ACPI active low. */
+ current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
+ current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW);
+
+ /* 0: mean bus 0--->ISA */
+ /* 0: PIC 0 */
+ /* 2: APIC 2 */
+ /* 5 mean: 0101 --> Edge-triggered, Active high */
+
+ /* create all subtables for processors */
+ /* acpi_create_madt_lapic_nmis returns current, not size. */
+ current = acpi_create_madt_lapic_nmis(current, 5, 1);
+
+ return current;
+}
+
+unsigned long acpi_fill_ssdt_generator(unsigned long current, char *oem_table_id) {
+ k8acpi_write_vars();
+ amd_model_fxx_generate_powernow(0, 0, 0);
+ return (unsigned long) (acpigen_get_current());
+}
+
+unsigned long write_acpi_tables(unsigned long start)
+{
+ unsigned long current;
+ acpi_rsdp_t *rsdp;
+ acpi_srat_t *srat;
+ acpi_rsdt_t *rsdt;
+ acpi_hpet_t *hpet;
+ acpi_madt_t *madt;
+ acpi_fadt_t *fadt;
+ acpi_facs_t *facs;
+ acpi_slit_t *slit;
+ acpi_header_t *ssdt;
+ acpi_header_t *dsdt;
+
+ /* Align ACPI tables to 16 byte. */
+ start = (start + 0x0f) & -0x10;
+ current = start;
+
+ printk_info("ACPI: Writing ACPI tables at %lx.\n", start);
+
+ /* We need at least an RSDP and an RSDT Table */
+ rsdp = (acpi_rsdp_t *) current;
+ current += sizeof(acpi_rsdp_t);
+
+ current = ALIGN(current, 16);
+ rsdt = (acpi_rsdt_t *) current;
+ current += sizeof(acpi_rsdt_t);
+
+ /* Clear all table memory. */
+ memset((void *) start, 0, current - start);
+
+ acpi_write_rsdp(rsdp, rsdt);
+ acpi_write_rsdt(rsdt);
+
+ current = ALIGN(current, 64);
+ facs = (acpi_facs_t *) current;
+ printk_debug("ACPI: * FACS %p\n", facs);
+ current += sizeof(acpi_facs_t);
+ acpi_create_facs(facs);
+
+ /* DSDT */
+ current = ALIGN(current, 16);
+ dsdt = (acpi_header_t *) current;
+ printk_debug("ACPI: * DSDT %p\n", dsdt);
+ current += ((acpi_header_t *) AmlCode)->length;
+ memcpy((void*) dsdt, (void*)AmlCode, ((acpi_header_t*)AmlCode)->length);
+ printk_debug("ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length);
+
+ current = ALIGN(current, 16);
+ fadt = (acpi_fadt_t *) current;
+ printk_debug("ACPI: * FACP (FADT) @ %p\n", fadt);
+ current += sizeof(acpi_fadt_t);
+
+ /* Add FADT now that we have facs and dsdt. */
+ acpi_create_fadt(fadt, facs, dsdt);
+ acpi_add_table(rsdt, fadt);
+
+ current = ALIGN(current, 16);
+ hpet = (acpi_hpet_t *) current;
+ printk_debug("ACPI: * HPET @ %p\n", hpet);
+ current += sizeof(acpi_hpet_t);
+ acpi_create_hpet(hpet);
+ acpi_add_table(rsdt, hpet);
+
+ current = ALIGN(current, 16);
+ madt = (acpi_madt_t *) current;
+ printk_debug("ACPI: * APIC/MADT @ %p\n", madt);
+ acpi_create_madt(madt);
+ current += madt->header.length;
+ acpi_add_table(rsdt, madt);
+
+ current = ALIGN(current, 16);
+ srat = (acpi_srat_t *) current;
+ printk_debug("ACPI: * SRAT @ %p\n", srat);
+ acpi_create_srat(srat);
+ current += srat->header.length;
+ acpi_add_table(rsdt, srat);
+
+ /* SLIT */
+ current = ALIGN(current, 16);
+ slit = (acpi_slit_t *) current;
+ printk_debug("ACPI: * SLIT @ %p\n", slit);
+ acpi_create_slit(slit);
+ current+=slit->header.length;
+ acpi_add_table(rsdt,slit);
+
+ /* SSDT */
+ current = ALIGN(current, 16);
+ ssdt = (acpi_header_t *)current;
+ printk_debug("ACPI: * SSDT @ %p\n", ssdt);
+ acpi_create_ssdt_generator(ssdt, "DYNADATA");
+ current += ssdt->length;
+ acpi_add_table(rsdt, ssdt);
+
+ printk_info("ACPI: done %p.\n", (void *)current);
+ return current;
+}
diff --git a/src/mainboard/tyan/s2891/dsdt.dsl b/src/mainboard/tyan/s2891/dsdt.dsl
new file mode 100644
index 0000000000..f6a8505481
--- /dev/null
+++ b/src/mainboard/tyan/s2891/dsdt.dsl
@@ -0,0 +1,280 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * (C) Copyright 2004 Nick Barker <Nick.Barker9@btinternet.com>
+ * (C) Copyright 2007, 2008 Rudolf Marek <r.marek@assembler.cz>
+ *
+ * ISA portions taken from QEMU acpi-dsdt.dsl.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License v2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+DefinitionBlock ("DSDT.aml", "DSDT", 1, "CORE ", "CB-DSDT ", 1)
+{
+ Include ("../../../../src/northbridge/amd/amdk8/amdk8_util.asl")
+
+ /* For now only define 2 power states:
+ * - S0 which is fully on
+ * - S5 which is soft off
+ * Any others would involve declaring the wake up methods.
+ */
+ Name (\_S0, Package () { 0x00, 0x00, 0x00, 0x00 })
+ Name (\_S5, Package () { 0x02, 0x02, 0x00, 0x00 })
+
+ /* Root of the bus hierarchy */
+ Scope (\_SB)
+ {
+ /* Top PCI device (CK804) */
+ Device (PCI0)
+ {
+ Name (_HID, EisaId ("PNP0A03"))
+ Name (_ADR, 0x00)
+ Name (_UID, 0x00)
+ Name (_BBN, 0x00)
+
+ External (BUSN)
+ External (MMIO)
+ External (PCIO)
+ External (SBLK)
+ External (TOM1)
+ External (HCLK)
+ External (SBDN)
+ External (HCDN)
+
+ Method (_CRS, 0, NotSerialized)
+ {
+ Name (BUF0, ResourceTemplate ()
+ {
+ IO (Decode16,
+ 0x0CF8, // Address Range Minimum
+ 0x0CF8, // Address Range Maximum
+ 0x01, // Address Alignment
+ 0x08, // Address Length
+ )
+ WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+ 0x0000, // Address Space Granularity
+ 0x0000, // Address Range Minimum
+ 0x0CF7, // Address Range Maximum
+ 0x0000, // Address Translation Offset
+ 0x0CF8, // Address Length
+ ,, , TypeStatic)
+ })
+ /* Methods bellow use SSDT to get actual MMIO regs
+ The IO ports are from 0xd00, optionally an VGA,
+ otherwise the info from MMIO is used.
+ \_SB.GXXX(node, link)
+ */
+ Concatenate (\_SB.GMEM (0x00, \_SB.PCI0.SBLK), BUF0, Local1)
+ Concatenate (\_SB.GIOR (0x00, \_SB.PCI0.SBLK), Local1, Local2)
+ Concatenate (\_SB.GWBN (0x00, \_SB.PCI0.SBLK), Local2, Local3)
+ Return (Local3)
+ }
+
+ /* PCI Routing Table */
+ Name (_PRT, Package () {
+ /* Since source is 0, index is IRQ. */
+ /* in ABCD, A=0, B=1, C=2, D=3 */
+ /* SlotFFFF, ABCD, source, index */
+ Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x0A }, /* 0x1 SMBUS IRQ 10 */
+ Package (0x04) { 0x0002FFFF, 0x00, 0x00, 0x15 }, /* 0x2 USB IRQ 21 */
+ Package (0x04) { 0x0002FFFF, 0x01, 0x00, 0x14 }, /* 0x2 USB IRQ 20 */
+ Package (0x04) { 0x0007FFFF, 0x00, 0x00, 0x17 }, /* 0x7 SATA 0 IRQ 23 */
+ Package (0x04) { 0x0008FFFF, 0x00, 0x00, 0x16 }, /* 0x8 SATA 1 IRQ 22 */
+ })
+
+ Device (PCIL)
+ {
+ Name (_ADR, 0x00090000)
+ Name (_UID, 0x00)
+ Name (_BBN, 0x01)
+ Name (_PRT, Package () {
+ Package (0x04) { 0x0007FFFF, 0x00, 0x00, 0x12 }, /* 1:06 Onboard ATI Rage IRQ 18 */
+ })
+ }
+
+ /* 2:00 PCIe x16 SB IRQ 18 */
+ Device (PE16)
+ {
+ Name (_ADR, 0x000e0000)
+ Name (_UID, 0x00)
+ Name (_BBN, 0x02)
+ Name (_PRT, Package () {
+ Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x12 }, /* PCIE IRQ16-IRQ19 */
+ Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x13 },
+ Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x10 },
+ Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x11 },
+ })
+ }
+
+ /* 2:00 PCIe x4 SB IRQ 17 */
+ Device (PE4)
+ {
+ Name (_ADR, 0x000e0000)
+ Name (_UID, 0x00)
+ Name (_BBN, 0x02)
+ Name (_PRT, Package () {
+ Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x11 }, /* PCIE IRQ16-IRQ19 */
+ Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x12 },
+ Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x13 },
+ Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x10 },
+ })
+ }
+
+ Device (ISA) {
+ Name (_HID, EisaId ("PNP0A05"))
+ Name (_ADR, 0x00010000)
+
+ /* PS/2 keyboard (seems to be important for WinXP install) */
+ Device (KBD)
+ {
+ Name (_HID, EisaId ("PNP0303"))
+ Method (_STA, 0, NotSerialized)
+ {
+ Return (0x0f)
+ }
+ Method (_CRS, 0, NotSerialized)
+ {
+ Name (TMP, ResourceTemplate () {
+ IO (Decode16, 0x0060, 0x0060, 0x01, 0x01)
+ IO (Decode16, 0x0064, 0x0064, 0x01, 0x01)
+ IRQNoFlags () {1}
+ })
+ Return (TMP)
+ }
+ }
+
+ /* PS/2 mouse */
+ Device (MOU)
+ {
+ Name (_HID, EisaId ("PNP0F13"))
+ Method (_STA, 0, NotSerialized)
+ {
+ Return (0x0f)
+ }
+ Method (_CRS, 0, NotSerialized)
+ {
+ Name (TMP, ResourceTemplate () {
+ IRQNoFlags () {12}
+ })
+ Return (TMP)
+ }
+ }
+
+ /* Parallel port */
+ Device (LP0)
+ {
+ Name (_HID, EisaId ("PNP0400")) // "PNP0401" for ECP
+ Method (_STA, 0, NotSerialized)
+ {
+ Return (0x0f)
+ }
+ Method (_CRS, 0, NotSerialized)
+ {
+ Name (TMP, ResourceTemplate () {
+ FixedIO (0x0378, 0x10)
+ IRQNoFlags () {7}
+ })
+ Return (TMP)
+ }
+ }
+
+ /* Floppy controller */
+ Device (FDC0)
+ {
+ Name (_HID, EisaId ("PNP0700"))
+ Method (_STA, 0, NotSerialized)
+ {
+ Return (0x0f)
+ }
+ Method (_CRS, 0, NotSerialized)
+ {
+ Name (BUF0, ResourceTemplate () {
+ FixedIO (0x03F0, 0x08)
+ IRQNoFlags () {6}
+ DMA (Compatibility, NotBusMaster, Transfer8) {2}
+ })
+ Return (BUF0)
+ }
+ }
+ }
+ }
+
+ /* AMD 8131 PCI-X tunnel */
+ Device (PCI2)
+ {
+ Name (_HID, EisaId ("PNP0A03"))
+ Name (_ADR, 0x00)
+ Name (_UID, 0x00)
+ Name (_BBN, 0x40)
+
+ /* There is no _PRT Here because I don't know what to
+ * put in it. Since the 8131 has its own APIC, it
+ * isn't wired to other IRQs. */
+
+ Method (_CRS, 0, NotSerialized)
+ {
+ Name (BUF0, ResourceTemplate ()
+ {
+ IO (Decode16,
+ 0x0CF8, // Address Range Minimum
+ 0x0CF8, // Address Range Maximum
+ 0x01, // Address Alignment
+ 0x08, // Address Length
+ )
+ })
+ /* Methods bellow use SSDT to get actual MMIO regs
+ The IO ports are from 0xd00, optionally an VGA,
+ otherwise the info from MMIO is used.
+ \_SB.GXXX(node, link)
+ */
+ Concatenate (\_SB.GMEM (0x00, 0x02), BUF0, Local1)
+ Concatenate (\_SB.GIOR (0x00, 0x02), Local1, Local2)
+ Concatenate (\_SB.GWBN (0x00, 0x02), Local2, Local3)
+ Return (Local3)
+ }
+
+ /* Channel A PCIX 133 */
+ Device (PCXF)
+ {
+ Name (_ADR, 0x00000000)
+ Name (_UID, 0x00)
+ Name (_BBN, 0x41)
+ Name (_PRT, Package () {
+ Package (0x04) { 0x0008FFFF, 0x00, 0x00, 0x18 }, /* PCIE IRQ24-IRQ27 shifted 3*/
+ Package (0x04) { 0x0008FFFF, 0x01, 0x00, 0x10 },
+ Package (0x04) { 0x0008FFFF, 0x02, 0x00, 0x1a },
+ Package (0x04) { 0x0008FFFF, 0x03, 0x00, 0x1b },
+ Package (0x04) { 0x000aFFFF, 0x00, 0x00, 0x1a }, /* PCIE IRQ24-IRQ27 shifted 2*/
+ Package (0x04) { 0x000aFFFF, 0x01, 0x00, 0x1b },
+ Package (0x04) { 0x000aFFFF, 0x02, 0x00, 0x18 },
+ Package (0x04) { 0x000aFFFF, 0x03, 0x00, 0x19 },
+ })
+ }
+
+ /* Channel B PCIX 100 */
+ Device (PCXS) /* Onboard NIC */
+ {
+ Name (_ADR, 0x00010000)
+ Name (_UID, 0x00)
+ Name (_BBN, 0x42)
+ Name (_PRT, Package () {
+ Package (0x04) { 0x0009FFFF, 0x00, 0x00, 0x1c }, /* PCIE IRQ28-IRQ31 */
+ Package (0x04) { 0x0009FFFF, 0x01, 0x00, 0x1d },
+ Package (0x04) { 0x0009FFFF, 0x02, 0x00, 0x1e },
+ Package (0x04) { 0x0009FFFF, 0x03, 0x00, 0x1f },
+ })
+ }
+ }
+ }
+}
diff --git a/src/mainboard/tyan/s2891/mainboard.c b/src/mainboard/tyan/s2891/mainboard.c
index d1c7be1b5e..df0f0068e3 100644
--- a/src/mainboard/tyan/s2891/mainboard.c
+++ b/src/mainboard/tyan/s2891/mainboard.c
@@ -1,6 +1,22 @@
#include <device/device.h>
+#include <console/console.h>
+#include <boot/tables.h>
#include "chip.h"
+/* in arch/i386/boot/tables.c */
+extern uint64_t high_tables_base, high_tables_size;
+
+int add_mainboard_resources(struct lb_memory *mem)
+{
+#if HAVE_HIGH_TABLES == 1
+ printk_debug("Adding high table area\n");
+ lb_add_memory_range(mem, LB_MEM_TABLE,
+ high_tables_base, high_tables_size);
+#endif
+ return 0;
+}
+
+
#if CONFIG_CHIP_NAME == 1
struct chip_operations mainboard_ops = {
CHIP_NAME("Tyan S2891 Mainboard")
diff --git a/src/mainboard/tyan/s2891/mptable.c b/src/mainboard/tyan/s2891/mptable.c
index cf917eeb8e..a03f117325 100644
--- a/src/mainboard/tyan/s2891/mptable.c
+++ b/src/mainboard/tyan/s2891/mptable.c
@@ -122,8 +122,7 @@ void *smp_write_config_table(void *v)
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xf, apicid_ck804, 0xf);
// Onboard ck804 smbus
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+1)<<2)|1, apicid_ck804, 0xa);
-// 10
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+1)<<2)|1, apicid_ck804, 0xa); // 10
// Onboard ck804 USB 1.1
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+2)<<2)|0, apicid_ck804, 0x15); // 21
@@ -137,7 +136,7 @@ void *smp_write_config_table(void *v)
// Onboard ck804 SATA 1
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn +8)<<2)|0, apicid_ck804, 0x16); // 22
-//Slot PCIE x16
+//Slot PCIE x16
for(i=0;i<4;i++) {
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_5, (0x00<<2)|i, apicid_ck804, 0x10 + (2+i+4-sbdn%4)%4);
}
diff --git a/src/mainboard/tyan/s2892/Config.lb b/src/mainboard/tyan/s2892/Config.lb
index 4b3f668e50..8663ab698e 100644
--- a/src/mainboard/tyan/s2892/Config.lb
+++ b/src/mainboard/tyan/s2892/Config.lb
@@ -51,6 +51,18 @@ if HAVE_MP_TABLE object mptable.o end
if HAVE_PIRQ_TABLE object irq_tables.o end
#object reset.o
+if HAVE_ACPI_TABLES
+ object acpi_tables.o
+ makerule dsdt.c
+ depends "$(MAINBOARD)/dsdt.dsl"
+ action "iasl -p $(PWD)/dsdt -tc $(MAINBOARD)/dsdt.dsl"
+ action "mv dsdt.hex dsdt.c"
+ end
+ object ./dsdt.o
+ #./ssdt.o is moved to northbridge/amd/amdk8/Config.lb
+ #./fadt.o is moved to southbridge/nvidia/ck804/Config.lb
+end
+
if USE_DCACHE_RAM
if CONFIG_USE_INIT
@@ -218,9 +230,10 @@ chip northbridge/amd/amdk8/root_complex
irq 0x70 = 6
drq 0x74 = 2
end
- device pnp 2e.1 off # Parallel Port
+ device pnp 2e.1 on # Parallel Port
io 0x60 = 0x378
irq 0x70 = 7
+ drq 0x74 = 3
end
device pnp 2e.2 on # Com1
io 0x60 = 0x3f8
diff --git a/src/mainboard/tyan/s2892/Options.lb b/src/mainboard/tyan/s2892/Options.lb
index 37b9b5baa2..67937e0b18 100644
--- a/src/mainboard/tyan/s2892/Options.lb
+++ b/src/mainboard/tyan/s2892/Options.lb
@@ -30,6 +30,12 @@ uses USE_OPTION_TABLE
uses LB_CKS_RANGE_START
uses LB_CKS_RANGE_END
uses LB_CKS_LOC
+uses HAVE_ACPI_TABLES
+uses HAVE_MAINBOARD_RESOURCES
+uses HAVE_HIGH_TABLES
+uses HAVE_LOW_TABLES
+uses CONFIG_MULTIBOOT
+uses HAVE_SMI_HANDLER
uses MAINBOARD
uses MAINBOARD_PART_NUMBER
uses MAINBOARD_VENDOR
@@ -54,6 +60,7 @@ uses HAVE_INIT_TIMER
uses CONFIG_GDB_STUB
uses CONFIG_CHIP_NAME
uses CONFIG_CONSOLE_VGA
+uses CONFIG_VGA_ROM_RUN
uses CONFIG_PCI_ROM_RUN
uses HW_MEM_HOLE_SIZEK
@@ -71,11 +78,7 @@ uses SB_HT_CHAIN_UNITID_OFFSET_ONLY
uses CONFIG_LB_MEM_TOPK
## ROM_SIZE is the size of boot ROM that this board will use.
-#512K bytes
-default ROM_SIZE=524288
-
-#1M bytes
-#default ROM_SIZE=1048576
+default ROM_SIZE=1024*1024
##
## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
@@ -99,6 +102,11 @@ default HAVE_FALLBACK_BOOT=1
default HAVE_HARD_RESET=1
##
+## Build SMI handler
+##
+default HAVE_SMI_HANDLER=0
+
+##
## Build code to export a programmable irq routing table
##
default HAVE_PIRQ_TABLE=1
@@ -111,6 +119,15 @@ default IRQ_SLOT_COUNT=11
default HAVE_MP_TABLE=1
##
+## Build code to provide ACPI support
+##
+default HAVE_ACPI_TABLES=1
+default HAVE_LOW_TABLES=1
+default HAVE_MAINBOARD_RESOURCES=1
+default HAVE_HIGH_TABLES=0
+default CONFIG_MULTIBOOT=0
+
+##
## Build code to export a CMOS option table
##
default HAVE_OPTION_TABLE=1
@@ -122,6 +139,11 @@ default LB_CKS_RANGE_START=49
default LB_CKS_RANGE_END=122
default LB_CKS_LOC=123
+#VGA Console
+default CONFIG_CONSOLE_VGA=1
+default CONFIG_PCI_ROM_RUN=1
+default CONFIG_VGA_ROM_RUN=1
+
##
## Build code for SMP support
## Only worry about 2 micro processors
diff --git a/src/mainboard/tyan/s2892/acpi_tables.c b/src/mainboard/tyan/s2892/acpi_tables.c
new file mode 100644
index 0000000000..cc3b5c2364
--- /dev/null
+++ b/src/mainboard/tyan/s2892/acpi_tables.c
@@ -0,0 +1,180 @@
+/*
+ * Island Aruma ACPI support
+ * written by Stefan Reinauer <stepan@openbios.org>
+ * (C) 2005 Stefan Reinauer
+ *
+ *
+ * Copyright 2005 AMD
+ * 2005.9 yhlu modify that to more dynamic for AMD Opteron Based MB
+ */
+
+#include <console/console.h>
+#include <string.h>
+#include <arch/acpi.h>
+#include <arch/smp/mpspec.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <cpu/x86/msr.h>
+#include <cpu/amd/mtrr.h>
+#include <cpu/amd/amdk8_sysconf.h>
+#include <../../../northbridge/amd/amdk8/amdk8_acpi.h>
+#include <cpu/amd/model_fxx_powernow.h>
+
+extern unsigned char AmlCode[];
+
+unsigned long acpi_fill_mcfg(unsigned long current)
+{
+ return current;
+}
+
+/* APIC */
+unsigned long acpi_fill_madt(unsigned long current)
+{
+ unsigned long apic_addr;
+ device_t dev;
+
+ /* create all subtables for processors */
+ current = acpi_create_madt_lapics(current);
+
+ /* Write NVIDIA CK804 IOAPIC. */
+ dev = dev_find_slot(0x0, PCI_DEVFN(0x1,0));
+ if (dev) {
+ apic_addr = pci_read_config32(dev, PCI_BASE_ADDRESS_1) & ~0xf;
+ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 4,
+ apic_addr, 0);
+ }
+
+ /* Write AMD 8131 two IOAPICs. */
+ dev = dev_find_slot(0x40, PCI_DEVFN(0x0,1));
+ if (dev) {
+ apic_addr = pci_read_config32(dev, PCI_BASE_ADDRESS_0) & ~0xf;
+ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 5,
+ apic_addr, 0x18);
+ }
+
+ dev = dev_find_slot(0x40, PCI_DEVFN(0x1, 1));
+ if (dev) {
+ apic_addr = pci_read_config32(dev, PCI_BASE_ADDRESS_0) & ~0xf;
+ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 6,
+ apic_addr, 0x1C);
+ }
+
+ /* IRQ9 ACPI active low. */
+ current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
+ current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW);
+
+ /* 0: mean bus 0--->ISA */
+ /* 0: PIC 0 */
+ /* 2: APIC 2 */
+ /* 5 mean: 0101 --> Edge-triggered, Active high */
+
+ /* create all subtables for processors */
+ /* acpi_create_madt_lapic_nmis returns current, not size. */
+ current = acpi_create_madt_lapic_nmis(current, 5, 1);
+
+ return current;
+}
+
+unsigned long acpi_fill_ssdt_generator(unsigned long current, char *oem_table_id) {
+ k8acpi_write_vars();
+ amd_model_fxx_generate_powernow(0, 0, 0);
+ return (unsigned long) (acpigen_get_current());
+}
+
+unsigned long write_acpi_tables(unsigned long start)
+{
+ unsigned long current;
+ acpi_rsdp_t *rsdp;
+ acpi_srat_t *srat;
+ acpi_rsdt_t *rsdt;
+ acpi_hpet_t *hpet;
+ acpi_madt_t *madt;
+ acpi_fadt_t *fadt;
+ acpi_facs_t *facs;
+ acpi_slit_t *slit;
+ acpi_header_t *ssdt;
+ acpi_header_t *dsdt;
+
+ /* Align ACPI tables to 16 byte. */
+ start = (start + 0x0f) & -0x10;
+ current = start;
+
+ printk_info("ACPI: Writing ACPI tables at %lx.\n", start);
+
+ /* We need at least an RSDP and an RSDT Table */
+ rsdp = (acpi_rsdp_t *) current;
+ current += sizeof(acpi_rsdp_t);
+
+ current = ALIGN(current, 16);
+ rsdt = (acpi_rsdt_t *) current;
+ current += sizeof(acpi_rsdt_t);
+
+ /* Clear all table memory. */
+ memset((void *) start, 0, current - start);
+
+ acpi_write_rsdp(rsdp, rsdt);
+ acpi_write_rsdt(rsdt);
+
+ current = ALIGN(current, 64);
+ facs = (acpi_facs_t *) current;
+ printk_debug("ACPI: * FACS %p\n", facs);
+ current += sizeof(acpi_facs_t);
+ acpi_create_facs(facs);
+
+ /* DSDT */
+ current = ALIGN(current, 16);
+ dsdt = (acpi_header_t *) current;
+ printk_debug("ACPI: * DSDT %p\n", dsdt);
+ current += ((acpi_header_t *) AmlCode)->length;
+ memcpy((void*) dsdt, (void*)AmlCode, ((acpi_header_t*)AmlCode)->length);
+ printk_debug("ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length);
+
+ current = ALIGN(current, 16);
+ fadt = (acpi_fadt_t *) current;
+ printk_debug("ACPI: * FACP (FADT) @ %p\n", fadt);
+ current += sizeof(acpi_fadt_t);
+
+ /* Add FADT now that we have facs and dsdt. */
+ acpi_create_fadt(fadt, facs, dsdt);
+ acpi_add_table(rsdt, fadt);
+
+ current = ALIGN(current, 16);
+ hpet = (acpi_hpet_t *) current;
+ printk_debug("ACPI: * HPET @ %p\n", hpet);
+ current += sizeof(acpi_hpet_t);
+ acpi_create_hpet(hpet);
+ acpi_add_table(rsdt, hpet);
+
+ current = ALIGN(current, 16);
+ madt = (acpi_madt_t *) current;
+ printk_debug("ACPI: * APIC/MADT @ %p\n", madt);
+ acpi_create_madt(madt);
+ current += madt->header.length;
+ acpi_add_table(rsdt, madt);
+
+ current = ALIGN(current, 16);
+ srat = (acpi_srat_t *) current;
+ printk_debug("ACPI: * SRAT @ %p\n", srat);
+ acpi_create_srat(srat);
+ current += srat->header.length;
+ acpi_add_table(rsdt, srat);
+
+ /* SLIT */
+ current = ALIGN(current, 16);
+ slit = (acpi_slit_t *) current;
+ printk_debug("ACPI: * SLIT @ %p\n", slit);
+ acpi_create_slit(slit);
+ current+=slit->header.length;
+ acpi_add_table(rsdt,slit);
+
+ /* SSDT */
+ current = ALIGN(current, 16);
+ ssdt = (acpi_header_t *)current;
+ printk_debug("ACPI: * SSDT @ %p\n", ssdt);
+ acpi_create_ssdt_generator(ssdt, "DYNADATA");
+ current += ssdt->length;
+ acpi_add_table(rsdt, ssdt);
+
+ printk_info("ACPI: done %p.\n", (void *)current);
+ return current;
+}
diff --git a/src/mainboard/tyan/s2892/dsdt.dsl b/src/mainboard/tyan/s2892/dsdt.dsl
new file mode 100644
index 0000000000..95bd9b9611
--- /dev/null
+++ b/src/mainboard/tyan/s2892/dsdt.dsl
@@ -0,0 +1,293 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * (C) Copyright 2004 Nick Barker <Nick.Barker9@btinternet.com>
+ * (C) Copyright 2007, 2008 Rudolf Marek <r.marek@assembler.cz>
+ *
+ * ISA portions taken from QEMU acpi-dsdt.dsl.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License v2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+DefinitionBlock ("DSDT.aml", "DSDT", 1, "CORE ", "CB-DSDT ", 1)
+{
+ Include ("../../../../src/northbridge/amd/amdk8/amdk8_util.asl")
+
+ /* For now only define 2 power states:
+ * - S0 which is fully on
+ * - S5 which is soft off
+ * Any others would involve declaring the wake up methods.
+ */
+ Name (\_S0, Package () { 0x00, 0x00, 0x00, 0x00 })
+ Name (\_S5, Package () { 0x02, 0x02, 0x00, 0x00 })
+
+ /* Root of the bus hierarchy */
+ Scope (\_SB)
+ {
+ /* Top PCI device (CK804) */
+ Device (PCI0)
+ {
+ Name (_HID, EisaId ("PNP0A03"))
+ Name (_ADR, 0x00)
+ Name (_UID, 0x00)
+ Name (_BBN, 0x00)
+
+ External (BUSN)
+ External (MMIO)
+ External (PCIO)
+ External (SBLK)
+ External (TOM1)
+ External (HCLK)
+ External (SBDN)
+ External (HCDN)
+
+ Method (_CRS, 0, NotSerialized)
+ {
+ Name (BUF0, ResourceTemplate ()
+ {
+ IO (Decode16,
+ 0x0CF8, // Address Range Minimum
+ 0x0CF8, // Address Range Maximum
+ 0x01, // Address Alignment
+ 0x08, // Address Length
+ )
+ WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+ 0x0000, // Address Space Granularity
+ 0x0000, // Address Range Minimum
+ 0x0CF7, // Address Range Maximum
+ 0x0000, // Address Translation Offset
+ 0x0CF8, // Address Length
+ ,, , TypeStatic)
+ })
+ /* Methods bellow use SSDT to get actual MMIO regs
+ The IO ports are from 0xd00, optionally an VGA,
+ otherwise the info from MMIO is used.
+ \_SB.GXXX(node, link)
+ */
+ Concatenate (\_SB.GMEM (0x00, \_SB.PCI0.SBLK), BUF0, Local1)
+ Concatenate (\_SB.GIOR (0x00, \_SB.PCI0.SBLK), Local1, Local2)
+ Concatenate (\_SB.GWBN (0x00, \_SB.PCI0.SBLK), Local2, Local3)
+ Return (Local3)
+ }
+
+ /* PCI Routing Table */
+ Name (_PRT, Package () {
+ /* Since source is 0, index is IRQ. */
+ /* in ABCD, A=0, B=1, C=2, D=3 */
+ /* SlotFFFF, ABCD, source, index */
+ Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x0A }, /* 0x1 SMBUS IRQ 10 */
+ Package (0x04) { 0x0002FFFF, 0x00, 0x00, 0x15 }, /* 0x2 USB IRQ 21 */
+ Package (0x04) { 0x0002FFFF, 0x01, 0x00, 0x14 }, /* 0x2 USB IRQ 20 */
+ Package (0x04) { 0x0007FFFF, 0x00, 0x00, 0x17 }, /* 0x7 SATA 0 IRQ 23 */
+ Package (0x04) { 0x0008FFFF, 0x00, 0x00, 0x16 }, /* 0x8 SATA 1 IRQ 22 */
+ })
+
+ Device (PCIL)
+ {
+ Name (_ADR, 0x00090000)
+ Name (_UID, 0x00)
+ Name (_BBN, 0x01)
+ Name (_PRT, Package () {
+ Package (0x04) { 0x0004FFFF, 0x00, 0x00, 0x10 }, /* 1:04 PCI 32 IRQ16-IRQ19 */
+ Package (0x04) { 0x0004FFFF, 0x01, 0x00, 0x11 },
+ Package (0x04) { 0x0004FFFF, 0x02, 0x00, 0x12 },
+ Package (0x04) { 0x0004FFFF, 0x03, 0x00, 0x13 },
+ Package (0x04) { 0x0006FFFF, 0x00, 0x00, 0x12 }, /* 1:06 Onboard ATI Rage IRQ 18 */
+ Package (0x04) { 0x0008FFFF, 0x00, 0x00, 0x12 }, /* 1:08 Onboard Intel NIC IRQ 18 */
+ })
+ }
+
+ /* 2:00 PCIe x16 SB IRQ 18 */
+ Device (PE16)
+ {
+ Name (_ADR, 0x000e0000)
+ Name (_UID, 0x00)
+ Name (_BBN, 0x02)
+ Name (_PRT, Package () {
+ Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x12 }, /* PCIE IRQ16-IRQ19 */
+ Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x13 },
+ Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x10 },
+ Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x11 },
+ })
+ }
+
+ /* 2:00 PCIe x4 SB IRQ 17 */
+ Device (PE4)
+ {
+ Name (_ADR, 0x000e0000)
+ Name (_UID, 0x00)
+ Name (_BBN, 0x02)
+ Name (_PRT, Package () {
+ Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x11 }, /* PCIE IRQ16-IRQ19 */
+ Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x12 },
+ Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x13 },
+ Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x10 },
+ })
+ }
+
+ Device (ISA) {
+ Name (_HID, EisaId ("PNP0A05"))
+ Name (_ADR, 0x00010000)
+
+ /* PS/2 keyboard (seems to be important for WinXP install) */
+ Device (KBD)
+ {
+ Name (_HID, EisaId ("PNP0303"))
+ Method (_STA, 0, NotSerialized)
+ {
+ Return (0x0f)
+ }
+ Method (_CRS, 0, NotSerialized)
+ {
+ Name (TMP, ResourceTemplate () {
+ IO (Decode16, 0x0060, 0x0060, 0x01, 0x01)
+ IO (Decode16, 0x0064, 0x0064, 0x01, 0x01)
+ IRQNoFlags () {1}
+ })
+ Return (TMP)
+ }
+ }
+
+ /* PS/2 mouse */
+ Device (MOU)
+ {
+ Name (_HID, EisaId ("PNP0F13"))
+ Method (_STA, 0, NotSerialized)
+ {
+ Return (0x0f)
+ }
+ Method (_CRS, 0, NotSerialized)
+ {
+ Name (TMP, ResourceTemplate () {
+ IRQNoFlags () {12}
+ })
+ Return (TMP)
+ }
+ }
+
+ /* Parallel port */
+ Device (LP0)
+ {
+ Name (_HID, EisaId ("PNP0400")) // "PNP0401" for ECP
+ Method (_STA, 0, NotSerialized)
+ {
+ Return (0x0f)
+ }
+ Method (_CRS, 0, NotSerialized)
+ {
+ Name (TMP, ResourceTemplate () {
+ FixedIO (0x0378, 0x10)
+ IRQNoFlags () {7}
+ })
+ Return (TMP)
+ }
+ }
+
+ /* Floppy controller */
+ Device (FDC0)
+ {
+ Name (_HID, EisaId ("PNP0700"))
+ Method (_STA, 0, NotSerialized)
+ {
+ Return (0x0f)
+ }
+ Method (_CRS, 0, NotSerialized)
+ {
+ Name (BUF0, ResourceTemplate () {
+ FixedIO (0x03F0, 0x08)
+ IRQNoFlags () {6}
+ DMA (Compatibility, NotBusMaster, Transfer8) {2}
+ })
+ Return (BUF0)
+ }
+ }
+ }
+ }
+
+ /* AMD 8131 PCI-X tunnel */
+ Device (PCI2)
+ {
+ Name (_HID, EisaId ("PNP0A03"))
+ Name (_ADR, 0x00)
+ Name (_UID, 0x00)
+ Name (_BBN, 0x40)
+
+ /* There is no _PRT Here because I don't know what to
+ * put in it. Since the 8131 has its own APIC, it
+ * isn't wired to other IRQs. */
+
+ Method (_CRS, 0, NotSerialized)
+ {
+ Name (BUF0, ResourceTemplate ()
+ {
+ IO (Decode16,
+ 0x0CF8, // Address Range Minimum
+ 0x0CF8, // Address Range Maximum
+ 0x01, // Address Alignment
+ 0x08, // Address Length
+ )
+ })
+ /* Methods bellow use SSDT to get actual MMIO regs
+ The IO ports are from 0xd00, optionally an VGA,
+ otherwise the info from MMIO is used.
+ \_SB.GXXX(node, link)
+ */
+ Concatenate (\_SB.GMEM (0x00, 0x02), BUF0, Local1)
+ Concatenate (\_SB.GIOR (0x00, 0x02), Local1, Local2)
+ Concatenate (\_SB.GWBN (0x00, 0x02), Local2, Local3)
+ Return (Local3)
+ }
+
+ /* Channel A PCIX 133 */
+ Device (PCXF)
+ {
+ Name (_ADR, 0x00000000)
+ Name (_UID, 0x00)
+ Name (_BBN, 0x41)
+ Name (_PRT, Package () {
+ Package (0x04) { 0x0003FFFF, 0x00, 0x00, 0x1b }, /* PCIE IRQ24-IRQ27 shifted 3*/
+ Package (0x04) { 0x0003FFFF, 0x01, 0x00, 0x18 },
+ Package (0x04) { 0x0003FFFF, 0x02, 0x00, 0x19 },
+ Package (0x04) { 0x0003FFFF, 0x03, 0x00, 0x1a },
+ Package (0x04) { 0x0002FFFF, 0x00, 0x00, 0x1a }, /* PCIE IRQ24-IRQ27 shifted 2*/
+ Package (0x04) { 0x0002FFFF, 0x01, 0x00, 0x1b },
+ Package (0x04) { 0x0002FFFF, 0x02, 0x00, 0x18 },
+ Package (0x04) { 0x0002FFFF, 0x03, 0x00, 0x19 },
+ })
+ }
+
+ /* Channel B PCIX 100 */
+ Device (PCXS) /* Onboard NIC, SO-DIMM, Slot 4 */
+ {
+ Name (_ADR, 0x00010000)
+ Name (_UID, 0x00)
+ Name (_BBN, 0x42)
+ Name (_PRT, Package () {
+ Package (0x04) { 0x0009FFFF, 0x00, 0x00, 0x1c }, /* PCIE IRQ28-IRQ31 */
+ Package (0x04) { 0x0009FFFF, 0x01, 0x00, 0x1d },
+ Package (0x04) { 0x0009FFFF, 0x02, 0x00, 0x1e },
+ Package (0x04) { 0x0009FFFF, 0x03, 0x00, 0x1f },
+ Package (0x04) { 0x0007FFFF, 0x00, 0x00, 0x1c }, /* PCIE IRQ28-IRQ31 */
+ Package (0x04) { 0x0007FFFF, 0x01, 0x00, 0x1d },
+ Package (0x04) { 0x0007FFFF, 0x02, 0x00, 0x1e },
+ Package (0x04) { 0x0007FFFF, 0x03, 0x00, 0x1f },
+ Package (0x04) { 0x0003FFFF, 0x00, 0x00, 0x1d }, /* PCIE IRQ28-IRQ31 shifted 2 */
+ Package (0x04) { 0x0003FFFF, 0x01, 0x00, 0x1e },
+ Package (0x04) { 0x0003FFFF, 0x02, 0x00, 0x1f },
+ Package (0x04) { 0x0003FFFF, 0x03, 0x00, 0x1c },
+ })
+ }
+ }
+ }
+}
diff --git a/src/mainboard/tyan/s2892/mainboard.c b/src/mainboard/tyan/s2892/mainboard.c
index a1f3e04340..26fb8f0894 100644
--- a/src/mainboard/tyan/s2892/mainboard.c
+++ b/src/mainboard/tyan/s2892/mainboard.c
@@ -1,6 +1,22 @@
#include <device/device.h>
+#include <console/console.h>
+#include <boot/tables.h>
#include "chip.h"
+/* in arch/i386/boot/tables.c */
+extern uint64_t high_tables_base, high_tables_size;
+
+int add_mainboard_resources(struct lb_memory *mem)
+{
+#if HAVE_HIGH_TABLES == 1
+ printk_debug("Adding high table area\n");
+ lb_add_memory_range(mem, LB_MEM_TABLE,
+ high_tables_base, high_tables_size);
+#endif
+ return 0;
+}
+
+
#if CONFIG_CHIP_NAME == 1
struct chip_operations mainboard_ops = {
CHIP_NAME("Tyan S2892 Mainboard")
diff --git a/src/mainboard/tyan/s2892/mptable.c b/src/mainboard/tyan/s2892/mptable.c
index c46fa9add8..da2daac85e 100644
--- a/src/mainboard/tyan/s2892/mptable.c
+++ b/src/mainboard/tyan/s2892/mptable.c
@@ -122,8 +122,7 @@ void *smp_write_config_table(void *v)
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xf, apicid_ck804, 0xf);
// Onboard ck804 smbus
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+1)<<2)|1, apicid_ck804, 0xa);
-// 10
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+1)<<2)|1, apicid_ck804, 0xa); // 10
// Onboard ck804 USB 1.1
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+2)<<2)|0, apicid_ck804, 0x15); // 21
@@ -137,7 +136,7 @@ void *smp_write_config_table(void *v)
// Onboard ck804 SATA 1
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn +8)<<2)|0, apicid_ck804, 0x16); // 22
-//Slot PCIE x16
+//Slot PCIE x16
for(i=0;i<4;i++) {
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_5, (0x00<<2)|i, apicid_ck804, 0x10 + (2+i+4-sbdn%4)%4);
}
@@ -150,7 +149,7 @@ void *smp_write_config_table(void *v)
//Slot 2 PCI 32
for(i=0;i<4;i++) {
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_1, (4<<2)|i, apicid_ck804, 0x10+(0+i)%4); //16
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_1, (0x04<<2)|i, apicid_ck804, 0x10 + (0+i)%4); //16
}
diff --git a/src/mainboard/tyan/s2895/Config.lb b/src/mainboard/tyan/s2895/Config.lb
index c87a530852..1ac890c00d 100644
--- a/src/mainboard/tyan/s2895/Config.lb
+++ b/src/mainboard/tyan/s2895/Config.lb
@@ -60,6 +60,18 @@ if HAVE_MP_TABLE object mptable.o end
if HAVE_PIRQ_TABLE object irq_tables.o end
#object reset.o
+if HAVE_ACPI_TABLES
+ object acpi_tables.o
+ makerule dsdt.c
+ depends "$(MAINBOARD)/dsdt.dsl"
+ action "iasl -p $(PWD)/dsdt -tc $(MAINBOARD)/dsdt.dsl"
+ action "mv dsdt.hex dsdt.c"
+ end
+ object ./dsdt.o
+ #./ssdt.o is moved to northbridge/amd/amdk8/Config.lb
+ #./fadt.o is moved to southbridge/nvidia/ck804/Config.lb
+end
+
if USE_DCACHE_RAM
if CONFIG_USE_INIT
@@ -254,9 +266,10 @@ chip northbridge/amd/amdk8/root_complex
irq 0x70 = 6
drq 0x74 = 2
end
- device pnp 2e.3 off # Parallel Port
+ device pnp 2e.3 on # Parallel Port
io 0x60 = 0x378
irq 0x70 = 7
+ drq 0x74 = 3
end
device pnp 2e.4 on # Com1
io 0x60 = 0x3f8
@@ -282,7 +295,8 @@ chip northbridge/amd/amdk8/root_complex
end
end
device pnp 2e.a on # RT
- io 0x60 = 0x400
+ io 0x60 = 0x90
+ irq 0x70 = 8
end
end
end
diff --git a/src/mainboard/tyan/s2895/Options.lb b/src/mainboard/tyan/s2895/Options.lb
index 55bef9597c..9949c679a5 100644
--- a/src/mainboard/tyan/s2895/Options.lb
+++ b/src/mainboard/tyan/s2895/Options.lb
@@ -33,6 +33,12 @@ uses USE_OPTION_TABLE
uses LB_CKS_RANGE_START
uses LB_CKS_RANGE_END
uses LB_CKS_LOC
+uses HAVE_ACPI_TABLES
+uses HAVE_MAINBOARD_RESOURCES
+uses HAVE_HIGH_TABLES
+uses HAVE_LOW_TABLES
+uses CONFIG_MULTIBOOT
+uses HAVE_SMI_HANDLER
uses MAINBOARD
uses MAINBOARD_PART_NUMBER
uses MAINBOARD_VENDOR
@@ -56,6 +62,7 @@ uses HAVE_INIT_TIMER
uses CONFIG_GDB_STUB
uses CONFIG_CHIP_NAME
uses CONFIG_CONSOLE_VGA
+uses CONFIG_VGA_ROM_RUN
uses CONFIG_PCI_ROM_RUN
uses HW_MEM_HOLE_SIZEK
uses K8_HT_FREQ_1G_SUPPORT
@@ -80,11 +87,7 @@ uses SB_HT_CHAIN_UNITID_OFFSET_ONLY
uses CONFIG_LB_MEM_TOPK
## ROM_SIZE is the size of boot ROM that this board will use.
-#512K bytes
-default ROM_SIZE=524288
-
-#1M bytes
-#default ROM_SIZE=1048576
+default ROM_SIZE=1024*1024
##
## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
@@ -112,6 +115,11 @@ default HAVE_FAILOVER_BOOT=1
default HAVE_HARD_RESET=1
##
+## Build SMI handler
+##
+default HAVE_SMI_HANDLER=0
+
+##
## Build code to export a programmable irq routing table
##
default HAVE_PIRQ_TABLE=1
@@ -124,6 +132,15 @@ default IRQ_SLOT_COUNT=11
default HAVE_MP_TABLE=1
##
+## Build code to provide ACPI support
+##
+default HAVE_ACPI_TABLES=1
+default HAVE_LOW_TABLES=1
+default HAVE_MAINBOARD_RESOURCES=1
+default HAVE_HIGH_TABLES=0
+default CONFIG_MULTIBOOT=0
+
+##
## Build code to export a CMOS option table
##
default HAVE_OPTION_TABLE=1
@@ -135,6 +152,11 @@ default LB_CKS_RANGE_START=49
default LB_CKS_RANGE_END=122
default LB_CKS_LOC=123
+#VGA Console
+default CONFIG_CONSOLE_VGA=1
+default CONFIG_PCI_ROM_RUN=1
+default CONFIG_VGA_ROM_RUN=1
+
##
## Build code for SMP support
## Only worry about 2 micro processors
diff --git a/src/mainboard/tyan/s2895/acpi_tables.c b/src/mainboard/tyan/s2895/acpi_tables.c
new file mode 100644
index 0000000000..5072326455
--- /dev/null
+++ b/src/mainboard/tyan/s2895/acpi_tables.c
@@ -0,0 +1,191 @@
+/*
+ * Island Aruma ACPI support
+ * written by Stefan Reinauer <stepan@openbios.org>
+ * (C) 2005 Stefan Reinauer
+ *
+ *
+ * Copyright 2005 AMD
+ * 2005.9 yhlu modify that to more dynamic for AMD Opteron Based MB
+ */
+
+#include <console/console.h>
+#include <string.h>
+#include <arch/acpi.h>
+#include <arch/smp/mpspec.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <cpu/x86/msr.h>
+#include <cpu/amd/mtrr.h>
+#include <cpu/amd/amdk8_sysconf.h>
+#include <../../../northbridge/amd/amdk8/amdk8_acpi.h>
+#include <cpu/amd/model_fxx_powernow.h>
+
+extern unsigned char AmlCode[];
+
+unsigned long acpi_fill_mcfg(unsigned long current)
+{
+ return current;
+}
+
+/* APIC */
+unsigned long acpi_fill_madt(unsigned long current)
+{
+ unsigned long apic_addr;
+ device_t dev;
+
+ /* create all subtables for processors */
+ current = acpi_create_madt_lapics(current);
+
+ /* Write NVIDIA CK804 IOAPIC. */
+ dev = dev_find_slot(0x0, PCI_DEVFN(0x1,0));
+ if (dev) {
+ apic_addr = pci_read_config32(dev, PCI_BASE_ADDRESS_1) & ~0xf;
+ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 4,
+ apic_addr, 0);
+ }
+
+ /* Write AMD 8131 two IOAPICs. */
+ dev = dev_find_slot(0x40, PCI_DEVFN(0x0,1));
+ if (dev) {
+ apic_addr = pci_read_config32(dev, PCI_BASE_ADDRESS_0) & ~0xf;
+ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 5,
+ apic_addr, 0x18);
+ }
+
+ dev = dev_find_slot(0x40, PCI_DEVFN(0x1, 1));
+ if (dev) {
+ apic_addr = pci_read_config32(dev, PCI_BASE_ADDRESS_0) & ~0xf;
+ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 6,
+ apic_addr, 0x1C);
+ }
+
+ /* Write second NVIDIA CK804 IOAPIC. */
+ dev = dev_find_slot(0x80, PCI_DEVFN(0x1, 0));
+ if (dev) {
+ apic_addr = pci_read_config32(dev, PCI_BASE_ADDRESS_1) & ~0xf;
+ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 7,
+ apic_addr, 0x20);
+ }
+
+ /* IRQ9 ACPI active low. */
+ current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
+ current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW);
+
+ /* IRQ0 -> APIC IRQ2. */
+ /* Doesn't work on this board. */
+
+ /* 0: mean bus 0--->ISA */
+ /* 0: PIC 0 */
+ /* 2: APIC 2 */
+ /* 5 mean: 0101 --> Edge-triggered, Active high */
+
+ /* create all subtables for processors */
+ /* acpi_create_madt_lapic_nmis returns current, not size. */
+ current = acpi_create_madt_lapic_nmis(current, 5, 1);
+
+ return current;
+}
+
+unsigned long acpi_fill_ssdt_generator(unsigned long current, char *oem_table_id) {
+ k8acpi_write_vars();
+ amd_model_fxx_generate_powernow(0, 0, 0);
+ return (unsigned long) (acpigen_get_current());
+}
+
+unsigned long write_acpi_tables(unsigned long start)
+{
+ unsigned long current;
+ acpi_rsdp_t *rsdp;
+ acpi_srat_t *srat;
+ acpi_rsdt_t *rsdt;
+ acpi_hpet_t *hpet;
+ acpi_madt_t *madt;
+ acpi_fadt_t *fadt;
+ acpi_facs_t *facs;
+ acpi_slit_t *slit;
+ acpi_header_t *ssdt;
+ acpi_header_t *dsdt;
+
+ /* Align ACPI tables to 16 byte. */
+ start = (start + 0x0f) & -0x10;
+ current = start;
+
+ printk_info("ACPI: Writing ACPI tables at %lx.\n", start);
+
+ /* We need at least an RSDP and an RSDT Table */
+ rsdp = (acpi_rsdp_t *) current;
+ current += sizeof(acpi_rsdp_t);
+
+ current = ALIGN(current, 16);
+ rsdt = (acpi_rsdt_t *) current;
+ current += sizeof(acpi_rsdt_t);
+
+ /* Clear all table memory. */
+ memset((void *) start, 0, current - start);
+
+ acpi_write_rsdp(rsdp, rsdt);
+ acpi_write_rsdt(rsdt);
+
+ current = ALIGN(current, 64);
+ facs = (acpi_facs_t *) current;
+ printk_debug("ACPI: * FACS %p\n", facs);
+ current += sizeof(acpi_facs_t);
+ acpi_create_facs(facs);
+
+ /* DSDT */
+ current = ALIGN(current, 16);
+ dsdt = (acpi_header_t *) current;
+ printk_debug("ACPI: * DSDT %p\n", dsdt);
+ current += ((acpi_header_t *) AmlCode)->length;
+ memcpy((void*) dsdt, (void*)AmlCode, ((acpi_header_t*)AmlCode)->length);
+ printk_debug("ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length);
+
+ current = ALIGN(current, 16);
+ fadt = (acpi_fadt_t *) current;
+ printk_debug("ACPI: * FACP (FADT) @ %p\n", fadt);
+ current += sizeof(acpi_fadt_t);
+
+ /* Add FADT now that we have facs and dsdt. */
+ acpi_create_fadt(fadt, facs, dsdt);
+ acpi_add_table(rsdt, fadt);
+
+ current = ALIGN(current, 16);
+ hpet = (acpi_hpet_t *) current;
+ printk_debug("ACPI: * HPET @ %p\n", hpet);
+ current += sizeof(acpi_hpet_t);
+ acpi_create_hpet(hpet);
+ acpi_add_table(rsdt, hpet);
+
+ current = ALIGN(current, 16);
+ madt = (acpi_madt_t *) current;
+ printk_debug("ACPI: * APIC/MADT @ %p\n", madt);
+ acpi_create_madt(madt);
+ current += madt->header.length;
+ acpi_add_table(rsdt, madt);
+
+ current = ALIGN(current, 16);
+ srat = (acpi_srat_t *) current;
+ printk_debug("ACPI: * SRAT @ %p\n", srat);
+ acpi_create_srat(srat);
+ current += srat->header.length;
+ acpi_add_table(rsdt, srat);
+
+ /* SLIT */
+ current = ALIGN(current, 16);
+ slit = (acpi_slit_t *) current;
+ printk_debug("ACPI: * SLIT @ %p\n", slit);
+ acpi_create_slit(slit);
+ current+=slit->header.length;
+ acpi_add_table(rsdt,slit);
+
+ /* SSDT */
+ current = ALIGN(current, 16);
+ ssdt = (acpi_header_t *)current;
+ printk_debug("ACPI: * SSDT @ %p\n", ssdt);
+ acpi_create_ssdt_generator(ssdt, "DYNADATA");
+ current += ssdt->length;
+ acpi_add_table(rsdt, ssdt);
+
+ printk_info("ACPI: done %p.\n", (void *)current);
+ return current;
+}
diff --git a/src/mainboard/tyan/s2895/dsdt.dsl b/src/mainboard/tyan/s2895/dsdt.dsl
new file mode 100644
index 0000000000..b449064954
--- /dev/null
+++ b/src/mainboard/tyan/s2895/dsdt.dsl
@@ -0,0 +1,344 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * (C) Copyright 2004 Nick Barker <Nick.Barker9@btinternet.com>
+ * (C) Copyright 2007, 2008 Rudolf Marek <r.marek@assembler.cz>
+ *
+ * ISA portions taken from QEMU acpi-dsdt.dsl.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License v2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+DefinitionBlock ("DSDT.aml", "DSDT", 1, "CORE ", "CB-DSDT ", 1)
+{
+ Include ("../../../../src/northbridge/amd/amdk8/amdk8_util.asl")
+
+ /* For now only define 2 power states:
+ * - S0 which is fully on
+ * - S5 which is soft off
+ * Any others would involve declaring the wake up methods.
+ */
+ Name (\_S0, Package () { 0x00, 0x00, 0x00, 0x00 })
+ Name (\_S5, Package () { 0x02, 0x02, 0x00, 0x00 })
+
+ /* Root of the bus hierarchy */
+ Scope (\_SB)
+ {
+ /* Top PCI device (CK804) */
+ Device (PCI0)
+ {
+ Name (_HID, EisaId ("PNP0A03"))
+ Name (_ADR, 0x00)
+ Name (_UID, 0x00)
+ Name (_BBN, 0x00)
+
+ External (BUSN)
+ External (MMIO)
+ External (PCIO)
+ External (SBLK)
+ External (TOM1)
+ External (HCLK)
+ External (SBDN)
+ External (HCDN)
+
+ Method (_CRS, 0, NotSerialized)
+ {
+ Name (BUF0, ResourceTemplate ()
+ {
+ IO (Decode16,
+ 0x0CF8, // Address Range Minimum
+ 0x0CF8, // Address Range Maximum
+ 0x01, // Address Alignment
+ 0x08, // Address Length
+ )
+ WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+ 0x0000, // Address Space Granularity
+ 0x0000, // Address Range Minimum
+ 0x0CF7, // Address Range Maximum
+ 0x0000, // Address Translation Offset
+ 0x0CF8, // Address Length
+ ,, , TypeStatic)
+ })
+ /* Methods bellow use SSDT to get actual MMIO regs
+ The IO ports are from 0xd00, optionally an VGA,
+ otherwise the info from MMIO is used.
+ \_SB.GXXX(node, link)
+ */
+ Concatenate (\_SB.GMEM (0x00, \_SB.PCI0.SBLK), BUF0, Local1)
+ Concatenate (\_SB.GIOR (0x00, \_SB.PCI0.SBLK), Local1, Local2)
+ Concatenate (\_SB.GWBN (0x00, \_SB.PCI0.SBLK), Local2, Local3)
+ Return (Local3)
+ }
+
+ /* PCI Routing Table */
+ Name (_PRT, Package () {
+ /* Since source is 0, index is IRQ. */
+ /* in ABCD, A=0, B=1, C=2, D=3 */
+ /* SlotFFFF, ABCD, source, index */
+ Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x0A }, /* 0x1 SMBUS IRQ 10 */
+ Package (0x04) { 0x0002FFFF, 0x00, 0x00, 0x15 }, /* 0x2 USB IRQ 21 */
+ Package (0x04) { 0x0002FFFF, 0x01, 0x00, 0x14 }, /* 0x2 USB IRQ 20 */
+ Package (0x04) { 0x0004FFFF, 0x00, 0x00, 0x14 }, /* 0x2 AUDIO IRQ 20 */
+ Package (0x04) { 0x0007FFFF, 0x00, 0x00, 0x17 }, /* 0x7 SATA 0 IRQ 23 */
+ Package (0x04) { 0x0008FFFF, 0x00, 0x00, 0x16 }, /* 0x8 SATA 1 IRQ 22 */
+ Package (0x04) { 0x000aFFFF, 0x00, 0x00, 0x15 }, /* 0xa LAN IRQ 21 */
+ })
+
+ Device (PCIL)
+ {
+ Name (_ADR, 0x00090000)
+ Name (_UID, 0x00)
+ Name (_BBN, 0x01)
+ Name (_PRT, Package () {
+ Package (0x04) { 0x0004FFFF, 0x00, 0x00, 0x10 }, /* 1:04 PCI 32 IRQ16-IRQ19 */
+ Package (0x04) { 0x0004FFFF, 0x01, 0x00, 0x11 },
+ Package (0x04) { 0x0004FFFF, 0x02, 0x00, 0x12 },
+ Package (0x04) { 0x0004FFFF, 0x03, 0x00, 0x13 },
+ Package (0x04) { 0x0005FFFF, 0x00, 0x00, 0x13 }, /* 1:05 IEEE-1394 IRQ 19 */
+ })
+ }
+
+ /* 2:00 PCIe x16 SB IRQ 18 */
+ Device (PE16)
+ {
+ Name (_ADR, 0x000e0000)
+ Name (_UID, 0x00)
+ Name (_BBN, 0x02)
+ Name (_PRT, Package () {
+ Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x12 }, /* PCIE IRQ16-IRQ19 */
+ Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x13 },
+ Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x10 },
+ Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x11 },
+ })
+ }
+
+ Device (ISA) {
+ Name (_HID, EisaId ("PNP0A05"))
+ Name (_ADR, 0x00010000)
+
+ /* PS/2 keyboard (seems to be important for WinXP install) */
+ Device (KBD)
+ {
+ Name (_HID, EisaId ("PNP0303"))
+ Method (_STA, 0, NotSerialized)
+ {
+ Return (0x0f)
+ }
+ Method (_CRS, 0, NotSerialized)
+ {
+ Name (TMP, ResourceTemplate () {
+ IO (Decode16, 0x0060, 0x0060, 0x01, 0x01)
+ IO (Decode16, 0x0064, 0x0064, 0x01, 0x01)
+ IRQNoFlags () {1}
+ })
+ Return (TMP)
+ }
+ }
+
+ /* PS/2 mouse */
+ Device (MOU)
+ {
+ Name (_HID, EisaId ("PNP0F13"))
+ Method (_STA, 0, NotSerialized)
+ {
+ Return (0x0f)
+ }
+ Method (_CRS, 0, NotSerialized)
+ {
+ Name (TMP, ResourceTemplate () {
+ IRQNoFlags () {12}
+ })
+ Return (TMP)
+ }
+ }
+
+ /* Parallel port */
+ Device (LP0)
+ {
+ Name (_HID, EisaId ("PNP0400")) // "PNP0401" for ECP
+ Method (_STA, 0, NotSerialized)
+ {
+ Return (0x0f)
+ }
+ Method (_CRS, 0, NotSerialized)
+ {
+ Name (TMP, ResourceTemplate () {
+ FixedIO (0x0378, 0x10)
+ IRQNoFlags () {7}
+ })
+ Return (TMP)
+ }
+ }
+
+ /* RTC */
+ Device (RTC)
+ {
+ Name (_HID, EisaId ("PNP0B00"))
+ Method (_CRS, 0, NotSerialized)
+ {
+ Name (TMP, ResourceTemplate () {
+ FixedIO (0x0090, 0x02)
+ IRQNoFlags () {8}
+ })
+ Return (TMP)
+ }
+ }
+
+ /* Floppy controller */
+ Device (FDC0)
+ {
+ Name (_HID, EisaId ("PNP0700"))
+ Method (_STA, 0, NotSerialized)
+ {
+ Return (0x0f)
+ }
+ Method (_CRS, 0, NotSerialized)
+ {
+ Name (BUF0, ResourceTemplate () {
+ FixedIO (0x03F0, 0x08)
+ IRQNoFlags () {6}
+ DMA (Compatibility, NotBusMaster, Transfer8) {2}
+ })
+ Return (BUF0)
+ }
+ }
+ }
+ }
+
+ /* CK804 2050 */
+ Device (PCI1)
+ {
+ Name (_HID, EisaId ("PNP0A03"))
+ Name (_ADR, 0x00)
+ Name (_UID, 0x00)
+ Name (_BBN, 0x80)
+
+ Method (_CRS, 0, NotSerialized)
+ {
+ Name (BUF0, ResourceTemplate ()
+ {
+ IO (Decode16,
+ 0x0CF8, // Address Range Minimum
+ 0x0CF8, // Address Range Maximum
+ 0x01, // Address Alignment
+ 0x08, // Address Length
+ )
+ })
+ /* Methods bellow use SSDT to get actual MMIO regs
+ The IO ports are from 0xd00, optionally an VGA,
+ otherwise the info from MMIO is used.
+ \_SB.GXXX(node, link)
+ */
+ Concatenate (\_SB.GMEM (0x01, 0x00), BUF0, Local1)
+ Concatenate (\_SB.GIOR (0x01, 0x00), Local1, Local2)
+ Concatenate (\_SB.GWBN (0x01, 0x00), Local2, Local3)
+ Return (Local3)
+ }
+
+ /* PCI Routing Table for this root bus */
+ Name (_PRT, Package () {
+ /* Since source is 0, index is IRQ. */
+ /* in ABCD, A=0, B=1, C=2, D=3 */
+ /* SlotFFFF, ABCD, source, index */
+ Package (0x04) { 0x000aFFFF, 0x00, 0x00, 0x35 }, /* 0xa LAN IRQ 53 */
+ })
+
+ /* PCIe x16 SB2 IRQ 18 */
+ Device (PE16)
+ {
+ Name (_ADR, 0x000e0000)
+ Name (_UID, 0x00)
+ Name (_BBN, 0x81)
+ Name (_PRT, Package () {
+ Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x32 }, /* PCIE IRQ48-IRQ51 */
+ Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x33 },
+ Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x30 },
+ Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x31 },
+ })
+ }
+
+ }
+
+ /* AMD 8131 PCI-X tunnel */
+ Device (PCI2)
+ {
+ Name (_HID, EisaId ("PNP0A03"))
+ Name (_ADR, 0x00)
+ Name (_UID, 0x00)
+ Name (_BBN, 0x40)
+
+ /* There is no _PRT Here because I don't know what to
+ * put in it. Since the 8131 has its own APIC, it
+ * isn't wired to other IRQs. */
+
+ Method (_CRS, 0, NotSerialized)
+ {
+ Name (BUF0, ResourceTemplate ()
+ {
+ IO (Decode16,
+ 0x0CF8, // Address Range Minimum
+ 0x0CF8, // Address Range Maximum
+ 0x01, // Address Alignment
+ 0x08, // Address Length
+ )
+ })
+ /* Methods bellow use SSDT to get actual MMIO regs
+ The IO ports are from 0xd00, optionally an VGA,
+ otherwise the info from MMIO is used.
+ \_SB.GXXX(node, link)
+ */
+ Concatenate (\_SB.GMEM (0x00, 0x02), BUF0, Local1)
+ Concatenate (\_SB.GIOR (0x00, 0x02), Local1, Local2)
+ Concatenate (\_SB.GWBN (0x00, 0x02), Local2, Local3)
+ Return (Local3)
+ }
+
+ /* Channel A PCIX 133 */
+ Device (PCXF)
+ {
+ Name (_ADR, 0x00000000)
+ Name (_UID, 0x00)
+ Name (_BBN, 0x41)
+ Name (_PRT, Package () {
+ Package (0x04) { 0x0004FFFF, 0x00, 0x00, 0x18 }, /* PCIE IRQ24-IRQ27 */
+ Package (0x04) { 0x0004FFFF, 0x01, 0x00, 0x19 },
+ Package (0x04) { 0x0004FFFF, 0x02, 0x00, 0x1a },
+ Package (0x04) { 0x0004FFFF, 0x03, 0x00, 0x1b },
+ })
+ }
+
+ /* Channel B PCIX 100 */
+ Device (PCXS) /* Slot 4, Onboard SCSI, Slot 5 */
+ {
+ Name (_ADR, 0x00010000)
+ Name (_UID, 0x00)
+ Name (_BBN, 0x42)
+ Name (_PRT, Package () {
+ Package (0x04) { 0x0004FFFF, 0x00, 0x00, 0x1c }, /* PCIE IRQ28-IRQ31 */
+ Package (0x04) { 0x0004FFFF, 0x01, 0x00, 0x1d },
+ Package (0x04) { 0x0004FFFF, 0x02, 0x00, 0x1e },
+ Package (0x04) { 0x0004FFFF, 0x03, 0x00, 0x1f },
+ Package (0x04) { 0x0006FFFF, 0x00, 0x00, 0x1e }, /* PCIE IRQ28-IRQ31 shifted 2 */
+ Package (0x04) { 0x0006FFFF, 0x01, 0x00, 0x1f },
+ Package (0x04) { 0x0006FFFF, 0x02, 0x00, 0x1c },
+ Package (0x04) { 0x0006FFFF, 0x03, 0x00, 0x1d },
+ Package (0x04) { 0x0009FFFF, 0x00, 0x00, 0x1d }, /* PCIE IRQ28-IRQ31 shifted 1 */
+ Package (0x04) { 0x0009FFFF, 0x01, 0x00, 0x1e },
+ Package (0x04) { 0x0009FFFF, 0x02, 0x00, 0x1f },
+ Package (0x04) { 0x0009FFFF, 0x03, 0x00, 0x1c },
+ })
+ }
+ }
+ }
+}
diff --git a/src/mainboard/tyan/s2895/mainboard.c b/src/mainboard/tyan/s2895/mainboard.c
index f615b1fd0a..5f38556467 100644
--- a/src/mainboard/tyan/s2895/mainboard.c
+++ b/src/mainboard/tyan/s2895/mainboard.c
@@ -1,6 +1,22 @@
#include <device/device.h>
+#include <console/console.h>
+#include <boot/tables.h>
#include "chip.h"
+/* in arch/i386/boot/tables.c */
+extern uint64_t high_tables_base, high_tables_size;
+
+int add_mainboard_resources(struct lb_memory *mem)
+{
+#if HAVE_HIGH_TABLES == 1
+ printk_debug("Adding high table area\n");
+ lb_add_memory_range(mem, LB_MEM_TABLE,
+ high_tables_base, high_tables_size);
+#endif
+ return 0;
+}
+
+
#if CONFIG_CHIP_NAME == 1
struct chip_operations mainboard_ops = {
CHIP_NAME("Tyan S2895 Mainboard")
diff --git a/src/mainboard/tyan/s2895/mptable.c b/src/mainboard/tyan/s2895/mptable.c
index 1591ec9e64..6036cf0c30 100644
--- a/src/mainboard/tyan/s2895/mptable.c
+++ b/src/mainboard/tyan/s2895/mptable.c
@@ -121,13 +121,13 @@ void *smp_write_config_table(void *v)
smp_write_ioapic(mc, apicid_ck804b, 0x11, res->base);
}
- dword = 0x0000d218;
+ dword = 0x0000d218; // Why does the factory BIOS have 0?
pci_write_config32(dev, 0x7c, dword);
dword = 0x00000000;
pci_write_config32(dev, 0x80, dword);
- dword = 0x00000d00;
+ dword = 0x00000d00; // Same here.
pci_write_config32(dev, 0x84, dword);
}
@@ -171,7 +171,7 @@ void *smp_write_config_table(void *v)
// Onboard ck804 NIC
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn +0x0a)<<2)|0, apicid_ck804, 0x15); // 21
-//Slot 1 PCIE x16
+//Slot PCIE x16
for(i=0;i<4;i++) {
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_5, (0x00<<2)|i, apicid_ck804, 0x10 + (2+i+4-sbdn%4)%4);
}
@@ -181,7 +181,7 @@ void *smp_write_config_table(void *v)
//Slot 2 PCI 32
for(i=0;i<4;i++) {
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_1, (0x04<<2)|i, apicid_ck804, 0x10 + (0+i)%4);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_1, (0x04<<2)|i, apicid_ck804, 0x10 + (0+i)%4); //16
}
if(sysconf.pci1234[2] & 0xf) {
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-28 11:51:19 +0000