diff options
Diffstat (limited to 'src/mainboard')
| -rw-r--r-- | src/mainboard/intel/galileo/Makefile.inc | 3 | ||||
| -rw-r--r-- | src/mainboard/intel/galileo/gen1.h | 46 | ||||
| -rw-r--r-- | src/mainboard/intel/galileo/gen2.h | 25 | ||||
| -rw-r--r-- | src/mainboard/intel/galileo/gpio.c | 21 | ||||
| -rw-r--r-- | src/mainboard/intel/galileo/reg_access.c | 93 | ||||
| -rw-r--r-- | src/mainboard/intel/galileo/reg_access.h | 97 |
6 files changed, 284 insertions, 1 deletions
diff --git a/src/mainboard/intel/galileo/Makefile.inc b/src/mainboard/intel/galileo/Makefile.inc index 382f8b99fb..4db9e31943 100644 --- a/src/mainboard/intel/galileo/Makefile.inc +++ b/src/mainboard/intel/galileo/Makefile.inc @@ -16,3 +16,6 @@ CPPFLAGS_common += -I$(src)/vendorcode/intel/fsp/fsp1_1/quark romstage-y += gpio.c + +ramstage-y += gpio.c +ramstage-y += reg_access.c diff --git a/src/mainboard/intel/galileo/gen1.h b/src/mainboard/intel/galileo/gen1.h index c718b617a8..26335dad61 100644 --- a/src/mainboard/intel/galileo/gen1.h +++ b/src/mainboard/intel/galileo/gen1.h @@ -13,6 +13,9 @@ * GNU General Public License for more details. */ +/* Jumper J2 determines the slave address of Cypress I/O GPIO expander */ +#define GALILEO_DETERMINE_IOEXP_SLA_RESUMEWELL_GPIO 5 + static const struct reg_script gen1_gpio_init[] = { /* Initialize the legacy GPIO controller */ REG_LEG_GPIO_WRITE(R_QNC_GPIO_CGEN_CORE_WELL, 0x03), @@ -49,5 +52,48 @@ static const struct reg_script gen1_gpio_init[] = { /* Toggle the Cypress reset line */ REG_GPIO_OR(GPIO_SWPORTA_DR, BIT4), REG_GPIO_AND(GPIO_SWPORTA_DR, ~BIT4), + + REG_SCRIPT_END +}; + +static const struct reg_script gen1_i2c_0x20_init[] = { + /* Route I2C pins to Arduino header: + * Clear I2C_MUX (GPORT1_BIT5) to route I2C to Arduino Shield connector + * + * I2C_SDA -> ANALOG_A4 + * I2C_SCL -> ANALOG_A5 + */ + REG_I2C_WRITE(GEN1_I2C_GPIO_EXP_0x20, GEN1_GPIO_EXP_PORT_SELECT, 1), + REG_I2C_AND(GEN1_I2C_GPIO_EXP_0x20, GEN1_GPIO_EXP_PORT_DIR, ~BIT5), + REG_I2C_WRITE(GEN1_I2C_GPIO_EXP_0x20, GEN1_GPIO_EXP_OUTPUT1, ~BIT5), + + /* Set all GPIO expander pins connected to the Reset Button as inputs + * Configure RESET_N_SHLD (GPORT5_BIT0) and SW_RESET_N_SHLD + * (GPORT5_BIT1) as inputs + */ + REG_I2C_WRITE(GEN1_I2C_GPIO_EXP_0x20, GEN1_GPIO_EXP_PORT_SELECT, 5), + REG_I2C_OR(GEN1_I2C_GPIO_EXP_0x20, GEN1_GPIO_EXP_PORT_DIR, BIT1 | BIT0), + + REG_SCRIPT_END +}; + +static const struct reg_script gen1_i2c_0x21_init[] = { + /* Route I2C pins to Arduino header: + * Clear I2C_MUX (GPORT1_BIT5) to route I2C to Arduino Shield connector + * + * I2C_SDA -> ANALOG_A4 + * I2C_SCL -> ANALOG_A5 + */ + REG_I2C_WRITE(GEN1_I2C_GPIO_EXP_0x21, GEN1_GPIO_EXP_PORT_SELECT, 1), + REG_I2C_AND(GEN1_I2C_GPIO_EXP_0x21, GEN1_GPIO_EXP_PORT_DIR, ~BIT5), + REG_I2C_AND(GEN1_I2C_GPIO_EXP_0x21, GEN1_GPIO_EXP_OUTPUT1, ~BIT5), + + /* Set all GPIO expander pins connected to the Reset Button as inputs + * Configure RESET_N_SHLD (GPORT5_BIT0) and SW_RESET_N_SHLD + * (GPORT5_BIT1) as inputs + */ + REG_I2C_WRITE(GEN1_I2C_GPIO_EXP_0x21, GEN1_GPIO_EXP_PORT_SELECT, 5), + REG_I2C_OR(GEN1_I2C_GPIO_EXP_0x21, GEN1_GPIO_EXP_PORT_DIR, BIT1 | BIT0), + REG_SCRIPT_END }; diff --git a/src/mainboard/intel/galileo/gen2.h b/src/mainboard/intel/galileo/gen2.h index dc8b6f5d6f..108971b8ba 100644 --- a/src/mainboard/intel/galileo/gen2.h +++ b/src/mainboard/intel/galileo/gen2.h @@ -48,3 +48,28 @@ static const struct reg_script gen2_gpio_init[] = { REG_SCRIPT_END }; + +static const struct reg_script gen2_i2c_init[] = { + /* Route I2C to Arduino Shield connector: + * Set AMUX1_IN (EXP2.P1_4) low + * Configure AMUX1_IN (EXP2.P1_4) as an output + * + * I2C_SDA -> ANALOG_A4 + * I2C_SCL -> ANALOG_A5 + */ + REG_I2C_AND(GEN2_I2C_GPIO_EXP2, GEN2_GPIO_EXP_OUTPUT1, ~BIT4), + REG_I2C_AND(GEN2_I2C_GPIO_EXP2, GEN2_GPIO_EXP_CONFIG1, ~BIT4), + + /* Set all GPIO expander pins connected to the Reset Button as inputs + * Configure Reset Button(EXP1.P1_7) as an input + * Disable pullup on Reset Button(EXP1.P1_7) + * Configure Reset Button(EXP2.P1_7) as an input + * Disable pullup on Reset Button(EXP2.P1_7) + */ + REG_I2C_OR(GEN2_I2C_GPIO_EXP1, GEN2_GPIO_EXP_CONFIG1, BIT7), + REG_I2C_AND(GEN2_I2C_GPIO_EXP1, GEN2_GPIO_EXP_PULL_UP_DOWN_EN1, ~BIT7), + REG_I2C_OR(GEN2_I2C_GPIO_EXP2, GEN2_GPIO_EXP_CONFIG1, BIT7), + REG_I2C_AND(GEN2_I2C_GPIO_EXP2, GEN2_GPIO_EXP_PULL_UP_DOWN_EN1, ~BIT7), + + REG_SCRIPT_END +}; diff --git a/src/mainboard/intel/galileo/gpio.c b/src/mainboard/intel/galileo/gpio.c index 00b42403d1..a411c5a0ff 100644 --- a/src/mainboard/intel/galileo/gpio.c +++ b/src/mainboard/intel/galileo/gpio.c @@ -16,10 +16,29 @@ #include <arch/io.h> #include <console/console.h> #include <soc/ramstage.h> -#include <soc/reg_access.h> +#include "reg_access.h" #include "gen1.h" #include "gen2.h" +void mainboard_gpio_i2c_init(device_t dev) +{ + const struct reg_script *script; + + printk(BIOS_INFO, "Galileo I2C chip initialization\n"); + + /* Determine the correct script for the board */ + if (IS_ENABLED(CONFIG_GALILEO_GEN2)) + script = gen2_i2c_init; + else + /* Determine which I2C address is in use */ + script = (reg_legacy_gpio_read (R_QNC_GPIO_RGLVL_RESUME_WELL) + & GALILEO_DETERMINE_IOEXP_SLA_RESUMEWELL_GPIO) + ? gen1_i2c_0x20_init : gen1_i2c_0x21_init; + + /* Initialize the I2C chips */ + reg_script_run(script); +} + void mainboard_gpio_init(void) { const struct reg_script *script; diff --git a/src/mainboard/intel/galileo/reg_access.c b/src/mainboard/intel/galileo/reg_access.c new file mode 100644 index 0000000000..f19f5269d7 --- /dev/null +++ b/src/mainboard/intel/galileo/reg_access.c @@ -0,0 +1,93 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2016 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied wacbmem_entryanty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define __SIMPLE_DEVICE__ + +#include <arch/io.h> +#include <console/console.h> +#include <device/i2c.h> +#include <soc/pci_devs.h> +#include <soc/reg_access.h> +#include "reg_access.h" + +#if ENV_RAMSTAGE +static uint64_t reg_read(struct reg_script_context *ctx) +{ + int ret_code; + const struct reg_script *step; + uint8_t value = 0; + + step = ctx->step; + switch (step->id) { + default: + printk(BIOS_ERR, + "ERROR - Unknown register set (0x%08x)!\n", + step->id); + ctx->display_features = REG_SCRIPT_DISPLAY_NOTHING; + break; + + case GEN1_I2C_GPIO_EXP_0x20: + case GEN1_I2C_GPIO_EXP_0x21: + case GEN2_I2C_GPIO_EXP0: + case GEN2_I2C_GPIO_EXP1: + case GEN2_I2C_GPIO_EXP2: + case GEN2_I2C_LED_PWM: + if (ctx->display_features) + printk(BIOS_INFO, "I2C chip 0x%02x: ", step->id); + ret_code = i2c_readb(0, step->id, (UINT8)step->reg, &value); + ASSERT(ret_code == 2); + break; + } + return value; +} + +static void reg_write(struct reg_script_context *ctx) +{ + int ret_code; + const struct reg_script *step; + uint8_t value; + + step = ctx->step; + switch (step->id) { + default: + printk(BIOS_ERR, + "ERROR - Unknown register set (0x%08x)!\n", + step->id); + ctx->display_features = REG_SCRIPT_DISPLAY_NOTHING; + break; + + case GEN1_I2C_GPIO_EXP_0x20: + case GEN1_I2C_GPIO_EXP_0x21: + case GEN2_I2C_GPIO_EXP0: + case GEN2_I2C_GPIO_EXP1: + case GEN2_I2C_GPIO_EXP2: + case GEN2_I2C_LED_PWM: + case RMU_TEMP_REGS: + if (ctx->display_features) + printk(BIOS_INFO, "I2C chip 0x%02x: ", step->id); + value = (UINT8)step->value; + ret_code = i2c_writeb(0, step->id, (UINT8)step->reg, value); + ASSERT(ret_code == 2); + break; + } +} + +const struct reg_script_bus_entry mainboard_reg_script_bus_table = { + MAINBOARD_TYPE, reg_read, reg_write +}; + +REG_SCRIPT_BUS_ENTRY(mainboard_reg_script_bus_table); + +#endif /* ENV_RAMSTAGE */ diff --git a/src/mainboard/intel/galileo/reg_access.h b/src/mainboard/intel/galileo/reg_access.h new file mode 100644 index 0000000000..451dc877a4 --- /dev/null +++ b/src/mainboard/intel/galileo/reg_access.h @@ -0,0 +1,97 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2016 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _GALILEO_REG_ACCESS_H_ +#define _GALILEO_REG_ACCESS_H_ + +#include <fsp/util.h> +#include <reg_script.h> +#include <soc/IntelQNCConfig.h> +#include <soc/QuarkNcSocId.h> +#include <soc/reg_access.h> + +enum { + MAINBOARD_TYPE = REG_SCRIPT_TYPE_MAINBOARD_BASE, + /* Add additional mainboard access types here*/ +}; + +enum { + GEN1_I2C_GPIO_EXP_0x20 = 0x20, /* Cypress CY8C9540A */ + GEN1_I2C_GPIO_EXP_0x21 = 0x21, /* Cypress CY8C9540A */ + + GEN2_I2C_GPIO_EXP0 = 0x25, /* NXP PCAL9535A */ + GEN2_I2C_GPIO_EXP1 = 0x26, /* NXP PCAL9535A */ + GEN2_I2C_GPIO_EXP2 = 0x27, /* NXP PCAL9535A */ + GEN2_I2C_LED_PWM = 0x47, /* NXP PCAL9685 */ +}; + +/* Cypress CY8C9548A registers */ +#define GEN1_GPIO_EXP_INPUT0 0x00 +#define GEN1_GPIO_EXP_INPUT1 0x01 +#define GEN1_GPIO_EXP_INPUT2 0x02 +#define GEN1_GPIO_EXP_INPUT3 0x03 +#define GEN1_GPIO_EXP_INPUT4 0x04 +#define GEN1_GPIO_EXP_INPUT5 0x05 +#define GEN1_GPIO_EXP_OUTPUT0 0x08 +#define GEN1_GPIO_EXP_OUTPUT1 0x09 +#define GEN1_GPIO_EXP_OUTPUT2 0x0a +#define GEN1_GPIO_EXP_OUTPUT3 0x0b +#define GEN1_GPIO_EXP_OUTPUT4 0x0c +#define GEN1_GPIO_EXP_OUTPUT5 0x0d +#define GEN1_GPIO_EXP_PORT_SELECT 0x18 +#define GEN1_GPIO_EXP_PORT_DIR 0x1c + +/* NXP PCAL9535A registers */ +#define GEN2_GPIO_EXP_INPUT0 0x00 +#define GEN2_GPIO_EXP_INPUT1 0x01 +#define GEN2_GPIO_EXP_OUTPUT0 0x02 +#define GEN2_GPIO_EXP_OUTPUT1 0x03 +#define GEN2_GPIO_EXP_POLARITY0 0x04 +#define GEN2_GPIO_EXP_POLARITY1 0x05 +#define GEN2_GPIO_EXP_CONFIG0 0x06 +#define GEN2_GPIO_EXP_CONFIG1 0x07 +#define GEN2_GPIO_EXP_INPUT_LATCH0 0x44 +#define GEN2_GPIO_EXP_INPUT_LATCH1 0x45 +#define GEN2_GPIO_EXP_PULL_UP_DOWN_EN0 0x46 +#define GEN2_GPIO_EXP_PULL_UP_DOWN_EN1 0x47 +#define GEN2_GPIO_EXP_PULL_UP_DOWN_SEL0 0x46 +#define GEN2_GPIO_EXP_PULL_UP_DOWN_SEL1 0x47 + +#define MAINBOARD_ACCESS(cmd_, reg_, size_, mask_, value_, timeout_, reg_set_) \ + _REG_SCRIPT_ENCODE_RAW(REG_SCRIPT_COMMAND_##cmd_, MAINBOARD_TYPE, \ + size_, reg_, mask_, value_, timeout_, reg_set_) + +/* I2C chip register access macros */ +#define REG_I2C_ACCESS(cmd_, reg_, mask_, value_, timeout_, slave_addr_) \ + MAINBOARD_ACCESS(cmd_, reg_, REG_SCRIPT_SIZE_8, mask_, value_, \ + timeout_, slave_addr_) +#define REG_I2C_READ(slave_addr_, reg_) \ + REG_I2C_ACCESS(READ, reg_, 0, 0, 0, slave_addr_) +#define REG_I2C_WRITE(slave_addr_, reg_, value_) \ + REG_I2C_ACCESS(WRITE, reg_, 0, value_, 0, slave_addr_) +#define REG_I2C_AND(slave_addr_, reg_, value_) \ + REG_I2C_RMW(slave_addr_, reg_, value_, 0) +#define REG_I2C_RMW(slave_addr_, reg_, mask_, value_) \ + REG_I2C_ACCESS(RMW, reg_, mask_, value_, 0, slave_addr_) +#define REG_I2C_RXW(slave_addr_, reg_, mask_, value_) \ + REG_I2C_ACCESS(RXW, reg_, mask_, value_, 0, slave_addr_) +#define REG_I2C_OR(slave_addr_, reg_, value_) \ + REG_I2C_RMW(slave_addr_, reg_, 0xff, value_) +#define REG_I2C_POLL(slave_addr_, reg_, mask_, value_, timeout_) \ + REG_I2C_ACCESS(POLL, reg_, mask_, value_, timeout_, slave_addr_) +#define REG_I2C_XOR(slave_addr_, reg_, value_) \ + REG_I2C_RXW(slave_addr_, reg_, 0xff, value_) + +#endif /* _GALILEO_REG_ACCESS_H_ */ |