summaryrefslogtreecommitdiff
path: root/src/mainboard
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard')
-rw-r--r--src/mainboard/tyan/s2880/Config.lb22
-rw-r--r--src/mainboard/tyan/s2880/auto.c8
-rw-r--r--src/mainboard/tyan/s2882/Config.lb23
-rw-r--r--src/mainboard/tyan/s2882/auto.c8
-rw-r--r--src/mainboard/tyan/s2882/mptable.c4
-rw-r--r--src/mainboard/tyan/s2885/Config.lb30
-rw-r--r--src/mainboard/tyan/s2885/auto.c5
-rw-r--r--src/mainboard/tyan/s2885/resourcemap.c2
-rw-r--r--src/mainboard/via/epia/auto.c4
9 files changed, 63 insertions, 43 deletions
diff --git a/src/mainboard/tyan/s2880/Config.lb b/src/mainboard/tyan/s2880/Config.lb
index d05f4e6967..87f54b925b 100644
--- a/src/mainboard/tyan/s2880/Config.lb
+++ b/src/mainboard/tyan/s2880/Config.lb
@@ -142,20 +142,24 @@ northbridge amd/amdk8 "mc0"
pci 0:18.1
pci 0:18.2
pci 0:18.3
- southbridge amd/amd8131 "amd8131"
+ southbridge amd/amd8131 "amd8131" link 0
pci 0:0.0
pci 0:0.1
pci 0:1.0
pci 0:1.1
end
- southbridge amd/amd8111 "amd8111"
+ southbridge amd/amd8111 "amd8111" link 0
pci 0:0.0
- pci 0:1.0
- pci 0:1.1
- pci 0:1.2
- pci 0:1.3
- pci 0:1.5
- pci 0:1.6
+ pci 0:1.0 on
+ pci 0:1.1 on
+ pci 0:1.2 on
+ pci 0:1.3 on
+ pci 0:1.5 off
+ pci 0:1.6 off
+ pci 1:0.0 on
+ pci 1:0.1 on
+ pci 1:0.2 on
+ pci 1:1.0 off
end
end
@@ -182,7 +186,7 @@ end
#end
dir /pc80
##dir /src/superio/winbond/w83627hf
-dir /bioscall
+#dir /bioscall
#dir /cpu/k8
cpu k8 "cpu0"
register "up" = "{.chip = &amd8131, .ht_width=16, .ht_speed=600}"
diff --git a/src/mainboard/tyan/s2880/auto.c b/src/mainboard/tyan/s2880/auto.c
index 07bcc1d92f..b5135d1a5c 100644
--- a/src/mainboard/tyan/s2880/auto.c
+++ b/src/mainboard/tyan/s2880/auto.c
@@ -15,6 +15,8 @@
#include "cpu/p6/boot_cpu.c"
#include "northbridge/amd/amdk8/reset_test.c"
#include "debug.c"
+#include "northbridge/amd/amdk8/cpu_rev.c"
+
#define REV_B_RESET 0
static void memreset_setup(void)
@@ -88,8 +90,8 @@ static inline int spd_read_byte(unsigned device, unsigned address)
/* include mainboard specific ht code */
#include "hypertransport.c"
-#include "northbridge/amd/amdk8/cpu_ldtstop.c"
-#include "southbridge/amd/amd8111/amd8111_ldtstop.c"
+//#include "northbridge/amd/amdk8/cpu_ldtstop.c"
+//#include "southbridge/amd/amd8111/amd8111_ldtstop.c"
#include "northbridge/amd/amdk8/raminit.c"
#include "northbridge/amd/amdk8/coherent_ht.c"
@@ -162,7 +164,7 @@ static void main(void)
enable_lapic();
init_timer();
if (!boot_cpu() ) {
- notify_bsp_ap_is_stopped();
+// notify_bsp_ap_is_stopped();
stop_this_cpu();
}
uart_init();
diff --git a/src/mainboard/tyan/s2882/Config.lb b/src/mainboard/tyan/s2882/Config.lb
index 9c9fc016b5..7f06909c66 100644
--- a/src/mainboard/tyan/s2882/Config.lb
+++ b/src/mainboard/tyan/s2882/Config.lb
@@ -13,6 +13,7 @@ uses ARCH
###
### Build the objects we have code for in this directory.
###
+##object mainboard.o
config chip.h
register "fixup_scsi" = "1"
register "fixup_vga" = "1"
@@ -140,20 +141,24 @@ northbridge amd/amdk8 "mc0"
pci 0:18.1
pci 0:18.2
pci 0:18.3
- southbridge amd/amd8131 "amd8131"
+ southbridge amd/amd8131 "amd8131" link 0
pci 0:0.0
pci 0:0.1
pci 0:1.0
pci 0:1.1
end
- southbridge amd/amd8111 "amd8111"
+ southbridge amd/amd8111 "amd8111" link 0
pci 0:0.0
- pci 0:1.0
- pci 0:1.1
- pci 0:1.2
- pci 0:1.3
- pci 0:1.5
- pci 0:1.6
+ pci 0:1.0 on
+ pci 0:1.1 on
+ pci 0:1.2 on
+ pci 0:1.3 on
+ pci 0:1.5 off
+ pci 0:1.6 off
+ pci 1:0.0 on
+ pci 1:0.1 on
+ pci 1:0.2 on
+ pci 1:1.0 off
end
end
@@ -179,7 +184,7 @@ end
#end
dir /pc80
##dir /src/superio/winbond/w83627hf
-dir /bioscall
+#dir /bioscall
#dir /cpu/k8
cpu k8 "cpu0"
register "up" = "{.chip = &amd8131, .ht_width=16, .ht_speed=600}"
diff --git a/src/mainboard/tyan/s2882/auto.c b/src/mainboard/tyan/s2882/auto.c
index 2de3c2f5c4..cbd54c348c 100644
--- a/src/mainboard/tyan/s2882/auto.c
+++ b/src/mainboard/tyan/s2882/auto.c
@@ -15,6 +15,8 @@
#include "cpu/p6/boot_cpu.c"
#include "northbridge/amd/amdk8/reset_test.c"
#include "debug.c"
+#include "northbridge/amd/amdk8/cpu_rev.c"
+
static void memreset_setup(void)
{
@@ -84,8 +86,8 @@ static inline int spd_read_byte(unsigned device, unsigned address)
/* include mainboard specific ht code */
#include "hypertransport.c"
-#include "northbridge/amd/amdk8/cpu_ldtstop.c"
-#include "southbridge/amd/amd8111/amd8111_ldtstop.c"
+//#include "northbridge/amd/amdk8/cpu_ldtstop.c"
+//#include "southbridge/amd/amd8111/amd8111_ldtstop.c"
#include "northbridge/amd/amdk8/raminit.c"
#include "northbridge/amd/amdk8/coherent_ht.c"
@@ -182,7 +184,7 @@ static void main(void)
memreset_setup();
sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu);
-#if 1
+#if 0
dump_pci_devices();
#endif
#if 0
diff --git a/src/mainboard/tyan/s2882/mptable.c b/src/mainboard/tyan/s2882/mptable.c
index 01cabe127c..6f1ce50602 100644
--- a/src/mainboard/tyan/s2882/mptable.c
+++ b/src/mainboard/tyan/s2882/mptable.c
@@ -88,7 +88,7 @@ void *smp_write_config_table(void *v, unsigned long * processor_map)
#endif
//Onboard SI Serial ATA
// smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, 0x14, 0x2, 0x11);
-#if 0
+#if 1
//Slot 3 PCIX 100/66
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, 0x20, 0x3, 0x3);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, 0x21, 0x3, 0x0);
@@ -107,7 +107,7 @@ void *smp_write_config_table(void *v, unsigned long * processor_map)
//On Board NIC
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, 0x24, 0x3, 0x0);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, 0x25, 0x3, 0x1);
-#if 0
+#if 1
//Slot 1 PCI-X 133/100/66
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, 0xc, 0x4, 0x0);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, 0xd, 0x4, 0x1);
diff --git a/src/mainboard/tyan/s2885/Config.lb b/src/mainboard/tyan/s2885/Config.lb
index a234b03841..ba172926b2 100644
--- a/src/mainboard/tyan/s2885/Config.lb
+++ b/src/mainboard/tyan/s2885/Config.lb
@@ -13,6 +13,7 @@ uses ARCH
###
### Build the objects we have code for in this directory.
###
+##object mainboard.o
config chip.h
register "fixup_scsi" = "1"
register "fixup_vga" = "1"
@@ -141,24 +142,29 @@ northbridge amd/amdk8 "mc0"
pci 0:18.1
pci 0:18.2
pci 0:18.3
- southbridge amd/amd8131 "amd8131"
+ southbridge amd/amd8131 "amd8131" link 2
pci 0:0.0
pci 0:0.1
pci 0:1.0
pci 0:1.1
end
- southbridge amd/amd8111 "amd8111"
+ southbridge amd/amd8111 "amd8111" link 2
pci 0:0.0
- pci 0:1.0
- pci 0:1.1
- pci 0:1.2
- pci 0:1.3
- pci 0:1.5
- pci 0:1.6
+ pci 0:1.0 on
+ pci 0:1.1 on
+ pci 0:1.2 on
+ pci 0:1.3 on
+ pci 0:1.5 on
+ pci 0:1.6 off
+ pci 1:0.0 on
+ pci 1:0.1 on
+ pci 1:0.2 on
+ pci 1:1.0 off
+
end
- southbridge amd/amd8151 "amd8151"
- pci 2:0.0
- pci 2:1.0
+ southbridge amd/amd8151 "amd8151" link 0
+ pci 0:0.0
+ pci 0:1.0
end
end
@@ -187,7 +193,7 @@ end
#end
dir /pc80
##dir /src/superio/winbond/w83627hf
-dir /bioscall
+#dir /bioscall
#dir /cpu/k8
cpu k8 "cpu0"
register "up" = "{.chip = &amd8151, .ht_width=16, .ht_speed=600}"
diff --git a/src/mainboard/tyan/s2885/auto.c b/src/mainboard/tyan/s2885/auto.c
index 30e3c22097..4d8ba2176b 100644
--- a/src/mainboard/tyan/s2885/auto.c
+++ b/src/mainboard/tyan/s2885/auto.c
@@ -16,6 +16,8 @@
#include "cpu/p6/boot_cpu.c"
#include "northbridge/amd/amdk8/reset_test.c"
#include "debug.c"
+#include "northbridge/amd/amdk8/cpu_rev.c"
+
#define REV_B_RESET 0
static void memreset_setup(void)
@@ -89,9 +91,6 @@ static inline int spd_read_byte(unsigned device, unsigned address)
/* include mainboard specific ht code */
#include "hypertransport.c"
-#include "northbridge/amd/amdk8/cpu_ldtstop.c"
-#include "southbridge/amd/amd8111/amd8111_ldtstop.c"
-
#include "northbridge/amd/amdk8/raminit.c"
#include "northbridge/amd/amdk8/coherent_ht.c"
#include "sdram/generic_sdram.c"
diff --git a/src/mainboard/tyan/s2885/resourcemap.c b/src/mainboard/tyan/s2885/resourcemap.c
index db5957ec07..f2535bf02f 100644
--- a/src/mainboard/tyan/s2885/resourcemap.c
+++ b/src/mainboard/tyan/s2885/resourcemap.c
@@ -254,6 +254,8 @@ static void setup_s2885_resource_map(void)
*/
PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x04000203,
PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x06050003,
+// PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x00000203,
+// PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000,
};
diff --git a/src/mainboard/via/epia/auto.c b/src/mainboard/via/epia/auto.c
index fa83d5c3c1..4b6632d196 100644
--- a/src/mainboard/via/epia/auto.c
+++ b/src/mainboard/via/epia/auto.c
@@ -26,8 +26,8 @@ void udelay(int usecs)
#include "southbridge/via/vt8231/vt8231_early_smbus.c"
-#define MAXIMUM_CONSOLE_LOGLEVEL 9
-#define DEFAULT_CONSOLE_LOGLEVEL 9
+#define MAXIMUM_CONSOLE_LOGLEVEL 6
+#define DEFAULT_CONSOLE_LOGLEVEL 6
#include "southbridge/via/vt8231/vt8231_early_serial.c"
static void memreset_setup(void)
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 06:44:41 +0000