diff options
Diffstat (limited to 'src/mainboard')
| -rw-r--r-- | src/mainboard/emulation/qemu-armv7/ramstage.c | 2 | ||||
| -rw-r--r-- | src/mainboard/google/snow/Makefile.inc | 2 | ||||
| -rw-r--r-- | src/mainboard/google/snow/mainboard.c | 279 | ||||
| -rw-r--r-- | src/mainboard/google/snow/mainboard.h | 16 | ||||
| -rw-r--r-- | src/mainboard/google/snow/memory.c | 64 | ||||
| -rw-r--r-- | src/mainboard/google/snow/ramstage.c | 244 |
6 files changed, 299 insertions, 308 deletions
diff --git a/src/mainboard/emulation/qemu-armv7/ramstage.c b/src/mainboard/emulation/qemu-armv7/ramstage.c index 5fce9fa68c..32e6cab95a 100644 --- a/src/mainboard/emulation/qemu-armv7/ramstage.c +++ b/src/mainboard/emulation/qemu-armv7/ramstage.c @@ -13,8 +13,6 @@ * GNU General Public License for more details. */ -#include <console/console.h> - void hardwaremain(void); void main(void) { diff --git a/src/mainboard/google/snow/Makefile.inc b/src/mainboard/google/snow/Makefile.inc index 84a8c054d6..190bb36154 100644 --- a/src/mainboard/google/snow/Makefile.inc +++ b/src/mainboard/google/snow/Makefile.inc @@ -19,11 +19,11 @@ bootblock-y += wakeup.c -romstage-y += mainboard.c romstage-y += memory.c romstage-y += romstage.c romstage-y += wakeup.c # ramstage-y += ec.c +ramstage-y += mainboard.c ramstage-y += ramstage.c ramstage-y += chromeos.c diff --git a/src/mainboard/google/snow/mainboard.c b/src/mainboard/google/snow/mainboard.c index 4a0d181cd0..f4c8e6cf13 100644 --- a/src/mainboard/google/snow/mainboard.c +++ b/src/mainboard/google/snow/mainboard.c @@ -17,60 +17,255 @@ * MA 02111-1307 USA */ -#include <stdlib.h> -#include <gpio.h> -#include <device/device.h> #include <console/console.h> - -#include <cpu/samsung/exynos5-common/gpio.h> +#include <device/device.h> +#include <device/i2c.h> +#include <drivers/ti/tps65090/tps65090.h> +#include <cbmem.h> +#include <delay.h> +#include <edid.h> +#include <vbe.h> +#include <boot/coreboot_tables.h> +#include <arch/cache.h> +#include <arch/exception.h> +#include <arch/gpio.h> +#include <cpu/samsung/exynos5-common/exynos-tmu.h> +#include <cpu/samsung/exynos5250/clk.h> +#include <cpu/samsung/exynos5250/cpu.h> #include <cpu/samsung/exynos5250/gpio.h> +#include <cpu/samsung/exynos5250/power.h> + +#include <cpu/samsung/exynos5-common/i2c.h> +#include <cpu/samsung/exynos5-common/s5p-dp-core.h> + + +/* convenient shorthand (in MB) */ +#define DRAM_START (CONFIG_SYS_SDRAM_BASE >> 20) +#define DRAM_SIZE CONFIG_DRAM_SIZE_MB +#define DRAM_END (DRAM_START + DRAM_SIZE) /* plus one... */ + +static struct edid snow_edid = { + .ha = 1366, + .va = 768, + .bpp = 16, +}; + +/* TODO: transplanted DP stuff, clean up once we have something that works */ +static enum exynos5_gpio_pin dp_pd_l = GPIO_Y25; /* active low */ +static enum exynos5_gpio_pin dp_rst_l = GPIO_X15; /* active low */ +static enum exynos5_gpio_pin dp_hpd = GPIO_X07; /* active high */ + +static void exynos_dp_bridge_setup(void) +{ + exynos_pinmux_config(PERIPH_ID_DPHPD, 0); + + gpio_set_value(dp_pd_l, 1); + gpio_cfg_pin(dp_pd_l, EXYNOS_GPIO_OUTPUT); + gpio_set_pull(dp_pd_l, EXYNOS_GPIO_PULL_NONE); + + gpio_set_value(dp_rst_l, 0); + gpio_cfg_pin(dp_rst_l, EXYNOS_GPIO_OUTPUT); + gpio_set_pull(dp_rst_l, EXYNOS_GPIO_PULL_NONE); + udelay(10); + gpio_set_value(dp_rst_l, 1); +} + +static void exynos_dp_bridge_init(void) +{ + /* De-assert PD (and possibly RST) to power up the bridge */ + gpio_set_value(dp_pd_l, 1); + gpio_set_value(dp_rst_l, 1); + + /* + * We need to wait for 90ms after bringing up the bridge since + * there is a phantom "high" on the HPD chip during its + * bootup. The phantom high comes within 7ms of de-asserting + * PD and persists for at least 15ms. The real high comes + * roughly 50ms after PD is de-asserted. The phantom high + * makes it hard for us to know when the NXP chip is up. + */ + udelay(90000); +} + +static int exynos_dp_hotplug(void) +{ + /* Check HPD. If it's high, we're all good. */ + return gpio_get_value(dp_hpd) ? 0 : 1; +} + +static void exynos_dp_reset(void) +{ + gpio_set_value(dp_pd_l, 0); + gpio_set_value(dp_rst_l, 0); + /* paranoid delay period (300ms) */ + udelay(300 * 1000); +} + +/* + * This delay is T3 in the LCD timing spec (defined as >200ms). We set + * this down to 60ms since that's the approximate maximum amount of time + * it'll take a bridge to start outputting LVDS data. The delay of + * >200ms is just a conservative value to avoid turning on the backlight + * when there's random LCD data on the screen. Shaving 140ms off the + * boot is an acceptable trade-off. + */ +#define LCD_T3_DELAY_MS 60 + +#define LCD_T5_DELAY_MS 10 +#define LCD_T6_DELAY_MS 10 + +static void snow_backlight_pwm(void) +{ + /*Configure backlight PWM as a simple output high (100% brightness) */ + gpio_direction_output(GPIO_B20, 1); + udelay(LCD_T6_DELAY_MS * 1000); +} + +static void snow_backlight_en(void) +{ + /* * Configure GPIO for LCD_BL_EN */ + gpio_direction_output(GPIO_X30, 1); +} + +#define TPS69050_BUS 4 /* Snow-specific */ -#include "mainboard.h" - -#define SNOW_BOARD_ID0_GPIO 88 /* GPD0, pin 0 */ -#define SNOW_BOARD_ID1_GPIO 89 /* GPD0, pin 1 */ - -struct { - enum mvl3 id0, id1; - enum snow_board_config config; -} snow_id_map[] = { - /* ID0 ID1 config */ - { LOGIC_0, LOGIC_0, SNOW_CONFIG_SAMSUNG_MP }, - { LOGIC_0, LOGIC_1, SNOW_CONFIG_ELPIDA_MP }, - { LOGIC_1, LOGIC_0, SNOW_CONFIG_SAMSUNG_DVT }, - { LOGIC_1, LOGIC_1, SNOW_CONFIG_ELPIDA_DVT }, - { LOGIC_0, LOGIC_Z, SNOW_CONFIG_SAMSUNG_PVT }, - { LOGIC_1, LOGIC_Z, SNOW_CONFIG_ELPIDA_PVT }, - { LOGIC_Z, LOGIC_0, SNOW_CONFIG_SAMSUNG_MP }, - { LOGIC_Z, LOGIC_Z, SNOW_CONFIG_ELPIDA_MP }, - { LOGIC_Z, LOGIC_1, SNOW_CONFIG_RSVD }, +#define FET1_CTRL 0x0f +#define FET6_CTRL 0x14 + +static void snow_lcd_vdd(void) +{ + /* Enable FET6, lcd panel */ + tps65090_fet_enable(TPS69050_BUS, FET6_CTRL); +} + +static void snow_backlight_vdd(void) +{ + /* Enable FET1, backlight */ + tps65090_fet_enable(TPS69050_BUS, FET1_CTRL); + udelay(LCD_T5_DELAY_MS * 1000); +} + +//static struct video_info smdk5250_dp_config = { +static struct video_info snow_dp_video_info = { + /* FIXME: fix video_info struct to use const for name */ + .name = (char *)"eDP-LVDS NXP PTN3460", + + .h_sync_polarity = 0, + .v_sync_polarity = 0, + .interlaced = 0, + + .color_space = COLOR_RGB, + .dynamic_range = VESA, + .ycbcr_coeff = COLOR_YCBCR601, + .color_depth = COLOR_8, + + .link_rate = LINK_RATE_2_70GBPS, + .lane_count = LANE_COUNT2, }; -int board_get_config(void) +/* FIXME: move some place more appropriate */ +#define EXYNOS5250_DP1_BASE 0x145b0000 +#define SNOW_MAX_DP_TRIES 5 + +/* + * This function disables the USB3.0 PLL to save power + */ +static void disable_usb30_pll(void) { - int i; - int id0, id1; - enum snow_board_config config = SNOW_CONFIG_UNKNOWN; - - id0 = gpio_read_mvl3(SNOW_BOARD_ID0_GPIO); - id1 = gpio_read_mvl3(SNOW_BOARD_ID1_GPIO); - if (id0 < 0 || id1 < 0) - return -1; - printk(BIOS_DEBUG, "%s: id0: %u, id1: %u\n", __func__, id0, id1); - - for (i = 0; i < ARRAY_SIZE(snow_id_map); i++) { - if (id0 == snow_id_map[i].id0 && id1 == snow_id_map[i].id1) { - config = snow_id_map[i].config; - break; + enum exynos5_gpio_pin usb3_pll_l = GPIO_Y11; + + gpio_direction_output(usb3_pll_l, 0); +} + +/* this happens after cpu_init where exynos resources are set */ +static void mainboard_init(device_t dev) +{ + int dp_tries; + struct s5p_dp_device dp_device = { + .base = (struct exynos5_dp *)EXYNOS5250_DP1_BASE, + .video_info = &snow_dp_video_info, + }; + void *fb_addr; + + i2c_init(TPS69050_BUS, CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + i2c_init(7, CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + + tmu_init(&exynos5250_tmu_info); + + /* Clock Gating all the unused IP's to save power */ + clock_gate(); + + /* Disable USB3.0 PLL to save 250mW of power */ + disable_usb30_pll(); + + fb_addr = cbmem_find(CBMEM_ID_CONSOLE); + set_vbe_mode_info_valid(&snow_edid, (uintptr_t)(fb_addr) + 64*KiB); + + snow_lcd_vdd(); + do { + udelay(50); + } while (!exynos_dp_hotplug()); + + exynos_dp_bridge_setup(); + for (dp_tries = 1; dp_tries <= SNOW_MAX_DP_TRIES; dp_tries++) { + exynos_dp_bridge_init(); + if (exynos_dp_hotplug()) { + exynos_dp_reset(); + continue; } + + if (dp_controller_init(&dp_device)) + continue; + + udelay(LCD_T3_DELAY_MS * 1000); + + snow_backlight_vdd(); + snow_backlight_pwm(); + snow_backlight_en(); + /* if we're here, we're successful */ + break; } - return config; + if (dp_tries > SNOW_MAX_DP_TRIES) + printk(BIOS_ERR, "%s: Failed to set up displayport\n", __func__); +} + +static void mainboard_enable(device_t dev) +{ + dev->ops->init = &mainboard_init; + + /* set up coreboot tables */ + high_tables_size = CONFIG_COREBOOT_TABLES_SIZE; + high_tables_base = CONFIG_SYS_SDRAM_BASE + + ((unsigned)CONFIG_DRAM_SIZE_MB << 20ULL) - + CONFIG_COREBOOT_TABLES_SIZE; + cbmem_init(high_tables_base, high_tables_size); + + /* set up dcache and MMU */ + /* FIXME: this should happen via resource allocator */ + exynos5250_config_l2_cache(); + mmu_init(); + mmu_config_range(0, DRAM_START, DCACHE_OFF); + mmu_config_range(DRAM_START, DRAM_SIZE, DCACHE_WRITEBACK); + mmu_config_range(DRAM_END, 4096 - DRAM_END, DCACHE_OFF); + dcache_invalidate_all(); + dcache_mmu_enable(); + + /* this is going to move, but we must have it now and we're + * not sure where */ + exception_init(); + + const unsigned epll_hz = 192000000; + const unsigned sample_rate = 48000; + const unsigned lr_frame_size = 256; + clock_epll_set_rate(epll_hz); + clock_select_i2s_clk_source(); + clock_set_i2s_clk_prescaler(epll_hz, sample_rate * lr_frame_size); + + power_enable_xclkout(); } -#if 0 struct chip_operations mainboard_ops = { .name = "Samsung/Google ARM Chromebook", .enable_dev = mainboard_enable, }; -#endif diff --git a/src/mainboard/google/snow/mainboard.h b/src/mainboard/google/snow/mainboard.h index 5060b720f3..a91bed49da 100644 --- a/src/mainboard/google/snow/mainboard.h +++ b/src/mainboard/google/snow/mainboard.h @@ -19,22 +19,6 @@ #ifndef MAINBOARD_H #define MAINBOARD_H - -enum snow_board_config { - SNOW_CONFIG_UNKNOWN = -1, - SNOW_CONFIG_SAMSUNG_EVT, - SNOW_CONFIG_ELPIDA_EVT, - SNOW_CONFIG_SAMSUNG_DVT, - SNOW_CONFIG_ELPIDA_DVT, - SNOW_CONFIG_SAMSUNG_PVT, - SNOW_CONFIG_ELPIDA_PVT, - SNOW_CONFIG_SAMSUNG_MP, - SNOW_CONFIG_ELPIDA_MP, - SNOW_CONFIG_RSVD, -}; - -int board_get_config(void); - enum { SNOW_IS_NOT_WAKEUP, // A normal boot (not suspend/resume). SNOW_WAKEUP_DIRECT, // A wake up event that can be resumed any time. diff --git a/src/mainboard/google/snow/memory.c b/src/mainboard/google/snow/memory.c index ba8c91fd6e..0f72e69ff8 100644 --- a/src/mainboard/google/snow/memory.c +++ b/src/mainboard/google/snow/memory.c @@ -23,13 +23,16 @@ #include <stdlib.h> #include <console/console.h> +#include <gpio.h> +#include <cpu/samsung/exynos5-common/gpio.h> +#include <cpu/samsung/exynos5250/gpio.h> #include <cpu/samsung/exynos5250/setup.h> #include <cpu/samsung/exynos5250/dmc.h> #include <cpu/samsung/exynos5250/clock_init.h> #include "mainboard.h" -struct mem_timings mem_timings[] = { +const struct mem_timings mem_timings[] = { { .mem_manuf = MEM_MANUF_ELPIDA, .mem_type = DDR_MODE_DDR3, @@ -450,6 +453,61 @@ struct mem_timings mem_timings[] = { } }; +#define SNOW_BOARD_ID0_GPIO 88 /* GPD0, pin 0 */ +#define SNOW_BOARD_ID1_GPIO 89 /* GPD0, pin 1 */ + +enum snow_board_config { + SNOW_CONFIG_UNKNOWN = -1, + SNOW_CONFIG_SAMSUNG_EVT, + SNOW_CONFIG_ELPIDA_EVT, + SNOW_CONFIG_SAMSUNG_DVT, + SNOW_CONFIG_ELPIDA_DVT, + SNOW_CONFIG_SAMSUNG_PVT, + SNOW_CONFIG_ELPIDA_PVT, + SNOW_CONFIG_SAMSUNG_MP, + SNOW_CONFIG_ELPIDA_MP, + SNOW_CONFIG_RSVD, +}; + +struct { + enum mvl3 id0, id1; + enum snow_board_config config; +} snow_id_map[] = { + /* ID0 ID1 config */ + { LOGIC_0, LOGIC_0, SNOW_CONFIG_SAMSUNG_MP }, + { LOGIC_0, LOGIC_1, SNOW_CONFIG_ELPIDA_MP }, + { LOGIC_1, LOGIC_0, SNOW_CONFIG_SAMSUNG_DVT }, + { LOGIC_1, LOGIC_1, SNOW_CONFIG_ELPIDA_DVT }, + { LOGIC_0, LOGIC_Z, SNOW_CONFIG_SAMSUNG_PVT }, + { LOGIC_1, LOGIC_Z, SNOW_CONFIG_ELPIDA_PVT }, + { LOGIC_Z, LOGIC_0, SNOW_CONFIG_SAMSUNG_MP }, + { LOGIC_Z, LOGIC_Z, SNOW_CONFIG_ELPIDA_MP }, + { LOGIC_Z, LOGIC_1, SNOW_CONFIG_RSVD }, +}; + +static int board_get_config(void) +{ + int i; + int id0, id1; + enum snow_board_config config = SNOW_CONFIG_UNKNOWN; + + id0 = gpio_read_mvl3(SNOW_BOARD_ID0_GPIO); + id1 = gpio_read_mvl3(SNOW_BOARD_ID1_GPIO); + if (id0 < 0 || id1 < 0) + return -1; + printk(BIOS_DEBUG, "%s: id0: %u, id1: %u\n", __func__, id0, id1); + + for (i = 0; i < ARRAY_SIZE(snow_id_map); i++) { + if (id0 == snow_id_map[i].id0 && id1 == snow_id_map[i].id1) { + config = snow_id_map[i].config; + break; + } + } + + return config; +} + + struct mem_timings *get_mem_timings(void) { int i; @@ -457,7 +515,7 @@ struct mem_timings *get_mem_timings(void) enum ddr_mode mem_type; unsigned int frequency_mhz; enum mem_manuf mem_manuf; - struct mem_timings *mem; + const struct mem_timings *mem; board_config = board_get_config(); switch (board_config) { @@ -487,7 +545,7 @@ struct mem_timings *get_mem_timings(void) if (mem->mem_type == mem_type && mem->frequency_mhz == frequency_mhz && mem->mem_manuf == mem_manuf) - return mem; + return (struct mem_timings *)mem; } return NULL; diff --git a/src/mainboard/google/snow/ramstage.c b/src/mainboard/google/snow/ramstage.c index 93979b2a60..6aa6082fcf 100644 --- a/src/mainboard/google/snow/ramstage.c +++ b/src/mainboard/google/snow/ramstage.c @@ -17,252 +17,8 @@ * MA 02111-1307 USA */ -#include <console/console.h> -#include <device/device.h> -#include <device/i2c.h> -#include <drivers/ti/tps65090/tps65090.h> -#include <cbmem.h> -#include <delay.h> -#include <boot/coreboot_tables.h> -#include <arch/cache.h> -#include <arch/exception.h> -#include <arch/gpio.h> -#include <cpu/samsung/exynos5-common/exynos-tmu.h> -#include <cpu/samsung/exynos5250/clk.h> -#include <cpu/samsung/exynos5250/cpu.h> -#include <cpu/samsung/exynos5250/gpio.h> -#include <cpu/samsung/exynos5250/power.h> - -#include <cpu/samsung/exynos5-common/i2c.h> -#include <cpu/samsung/exynos5-common/s5p-dp-core.h> - - -/* convenient shorthand (in MB) */ -#define DRAM_START (CONFIG_SYS_SDRAM_BASE >> 20) -#define DRAM_SIZE CONFIG_DRAM_SIZE_MB -#define DRAM_END (DRAM_START + DRAM_SIZE) /* plus one... */ - - void hardwaremain(void); void main(void) { - /* FIXME this should be moved elsewhere. We don't want ramstage.c */ - - /* set up coreboot tables */ - high_tables_size = CONFIG_COREBOOT_TABLES_SIZE; - high_tables_base = CONFIG_SYS_SDRAM_BASE + - ((unsigned)CONFIG_DRAM_SIZE_MB << 20ULL) - - CONFIG_COREBOOT_TABLES_SIZE; - cbmem_init(high_tables_base, high_tables_size); - - /* set up dcache and MMU */ - /* FIXME: this should happen via resource allocator */ - exynos5250_config_l2_cache(); - mmu_init(); - mmu_config_range(0, DRAM_START, DCACHE_OFF); - mmu_config_range(DRAM_START, DRAM_SIZE, DCACHE_WRITEBACK); - mmu_config_range(DRAM_END, 4096 - DRAM_END, DCACHE_OFF); - dcache_invalidate_all(); - dcache_mmu_enable(); - - /* this is going to move, but we must have it now and we're - * not sure where */ - exception_init(); - - const unsigned epll_hz = 192000000; - const unsigned sample_rate = 48000; - const unsigned lr_frame_size = 256; - clock_epll_set_rate(epll_hz); - clock_select_i2s_clk_source(); - clock_set_i2s_clk_prescaler(epll_hz, sample_rate * lr_frame_size); - - power_enable_xclkout(); - hardwaremain(); } - -/* TODO: transplanted DP stuff, clean up once we have something that works */ -static enum exynos5_gpio_pin dp_pd_l = GPIO_Y25; /* active low */ -static enum exynos5_gpio_pin dp_rst_l = GPIO_X15; /* active low */ -static enum exynos5_gpio_pin dp_hpd = GPIO_X07; /* active high */ - -static void exynos_dp_bridge_setup(void) -{ - exynos_pinmux_config(PERIPH_ID_DPHPD, 0); - - gpio_set_value(dp_pd_l, 1); - gpio_cfg_pin(dp_pd_l, EXYNOS_GPIO_OUTPUT); - gpio_set_pull(dp_pd_l, EXYNOS_GPIO_PULL_NONE); - - gpio_set_value(dp_rst_l, 0); - gpio_cfg_pin(dp_rst_l, EXYNOS_GPIO_OUTPUT); - gpio_set_pull(dp_rst_l, EXYNOS_GPIO_PULL_NONE); - udelay(10); - gpio_set_value(dp_rst_l, 1); -} - -static void exynos_dp_bridge_init(void) -{ - /* De-assert PD (and possibly RST) to power up the bridge */ - gpio_set_value(dp_pd_l, 1); - gpio_set_value(dp_rst_l, 1); - - /* - * We need to wait for 90ms after bringing up the bridge since - * there is a phantom "high" on the HPD chip during its - * bootup. The phantom high comes within 7ms of de-asserting - * PD and persists for at least 15ms. The real high comes - * roughly 50ms after PD is de-asserted. The phantom high - * makes it hard for us to know when the NXP chip is up. - */ - udelay(90000); -} - -static int exynos_dp_hotplug(void) -{ - /* Check HPD. If it's high, we're all good. */ - return gpio_get_value(dp_hpd) ? 0 : 1; -} - -static void exynos_dp_reset(void) -{ - gpio_set_value(dp_pd_l, 0); - gpio_set_value(dp_rst_l, 0); - /* paranoid delay period (300ms) */ - udelay(300 * 1000); -} - -/* - * This delay is T3 in the LCD timing spec (defined as >200ms). We set - * this down to 60ms since that's the approximate maximum amount of time - * it'll take a bridge to start outputting LVDS data. The delay of - * >200ms is just a conservative value to avoid turning on the backlight - * when there's random LCD data on the screen. Shaving 140ms off the - * boot is an acceptable trade-off. - */ -#define LCD_T3_DELAY_MS 60 - -#define LCD_T5_DELAY_MS 10 -#define LCD_T6_DELAY_MS 10 - -static void snow_backlight_pwm(void) -{ - /*Configure backlight PWM as a simple output high (100% brightness) */ - gpio_direction_output(GPIO_B20, 1); - udelay(LCD_T6_DELAY_MS * 1000); -} - -static void snow_backlight_en(void) -{ - /* * Configure GPIO for LCD_BL_EN */ - gpio_direction_output(GPIO_X30, 1); -} - -#define TPS69050_BUS 4 /* Snow-specific */ - -#define FET1_CTRL 0x0f -#define FET6_CTRL 0x14 - -static void snow_lcd_vdd(void) -{ - /* Enable FET6, lcd panel */ - tps65090_fet_enable(TPS69050_BUS, FET6_CTRL); -} - -static void snow_backlight_vdd(void) -{ - /* Enable FET1, backlight */ - tps65090_fet_enable(TPS69050_BUS, FET1_CTRL); - udelay(LCD_T5_DELAY_MS * 1000); -} - -//static struct video_info smdk5250_dp_config = { -static struct video_info snow_dp_video_info = { - /* FIXME: fix video_info struct to use const for name */ - .name = (char *)"eDP-LVDS NXP PTN3460", - - .h_sync_polarity = 0, - .v_sync_polarity = 0, - .interlaced = 0, - - .color_space = COLOR_RGB, - .dynamic_range = VESA, - .ycbcr_coeff = COLOR_YCBCR601, - .color_depth = COLOR_8, - - .link_rate = LINK_RATE_2_70GBPS, - .lane_count = LANE_COUNT2, -}; - -/* FIXME: move some place more appropriate */ -#define EXYNOS5250_DP1_BASE 0x145b0000 -#define SNOW_MAX_DP_TRIES 5 - -/* - * This function disables the USB3.0 PLL to save power - */ -static void disable_usb30_pll(void) -{ - enum exynos5_gpio_pin usb3_pll_l = GPIO_Y11; - - gpio_direction_output(usb3_pll_l, 0); -} - -/* this happens after cpu_init where exynos resources are set */ -static void mainboard_init(device_t dev) -{ - int dp_tries; - struct s5p_dp_device dp_device = { - .base = (struct exynos5_dp *)EXYNOS5250_DP1_BASE, - .video_info = &snow_dp_video_info, - }; - - i2c_init(TPS69050_BUS, CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); - i2c_init(7, CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); - - tmu_init(&exynos5250_tmu_info); - - /* Clock Gating all the unused IP's to save power */ - clock_gate(); - - /* Disable USB3.0 PLL to save 250mW of power */ - disable_usb30_pll(); - - snow_lcd_vdd(); - do { - udelay(50); - } while (!exynos_dp_hotplug()); - - exynos_dp_bridge_setup(); - for (dp_tries = 1; dp_tries <= SNOW_MAX_DP_TRIES; dp_tries++) { - exynos_dp_bridge_init(); - if (exynos_dp_hotplug()) { - exynos_dp_reset(); - continue; - } - - if (dp_controller_init(&dp_device)) - continue; - - udelay(LCD_T3_DELAY_MS * 1000); - - snow_backlight_vdd(); - snow_backlight_pwm(); - snow_backlight_en(); - /* if we're here, we're successful */ - break; - } - - if (dp_tries > SNOW_MAX_DP_TRIES) - printk(BIOS_ERR, "%s: Failed to set up displayport\n", __func__); -} - -static void mainboard_enable(device_t dev) -{ - dev->ops->init = &mainboard_init; -} - -struct chip_operations mainboard_ops = { - .name = "Samsung/Google ARM Chromebook", - .enable_dev = mainboard_enable, -}; |