diff options
Diffstat (limited to 'src/mainboard')
| -rw-r--r-- | src/mainboard/google/brya/variants/skolas/overridetree.cb | 87 |
1 files changed, 81 insertions, 6 deletions
diff --git a/src/mainboard/google/brya/variants/skolas/overridetree.cb b/src/mainboard/google/brya/variants/skolas/overridetree.cb index 388ea4f053..bb6d1eac08 100644 --- a/src/mainboard/google/brya/variants/skolas/overridetree.cb +++ b/src/mainboard/google/brya/variants/skolas/overridetree.cb @@ -132,7 +132,7 @@ chip soc/intel/alderlake # TCP1 (DP-2) for port C1 register "device[3].name" = ""DD03"" register "device[3].use_pld" = "true" - register "device[3].pld" = "ACPI_PLD_TYPE_C(RIGHT, LEFT, ACPI_PLD_GROUP(2, 1))" + register "device[3].pld" = "ACPI_PLD_TYPE_C(RIGHT, LEFT, ACPI_PLD_GROUP(2, 1))" # TCP2 (DP-3) for port C2 register "device[4].name" = ""DD04"" register "device[4].use_pld" = "true" @@ -548,7 +548,9 @@ chip soc/intel/alderlake register "link_freq[1]" = "180 * MHz" # 180 MHz register "remote_name" = ""IPU0"" + register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD" register "has_power_resource" = "1" + #Controls register "clk_panel.clks[0].clknum" = "IMGCLKOUT_3" register "clk_panel.clks[0].freq" = "FREQ_19_2_MHZ" @@ -582,9 +584,23 @@ chip soc/intel/alderlake register "chip_name" = ""DW9768 VCM"" register "device_type" = "INTEL_ACPI_CAMERA_VCM" - register "pr0" = ""\\_SB.PCI0.I2C0.CAM0.PRIC"" register "vcm_compat" = ""dongwoon,dw9768"" + register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D0" + + register "has_power_resource" = "1" + + #Controls + register "gpio_panel.gpio[0].gpio_num" = "GPP_D16" #EN_WCAM_PWR + + #_ON + register "on_seq.ops_cnt" = "1" + register "on_seq.ops[0]" = "SEQ_OPS_GPIO_ENABLE(0, 0)" + + #_OFF + register "off_seq.ops_cnt" = "1" + register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" + device i2c 0C on probe WFC WFC_MIPI_OVTI8856 end @@ -595,7 +611,6 @@ chip soc/intel/alderlake register "chip_name" = ""AT24 EEPROM"" register "device_type" = "INTEL_ACPI_CAMERA_NVM" - register "pr0" = ""\\_SB.PCI0.I2C0.CAM0.PRIC"" register "nvm_compat" = ""atmel,24c1024"" register "nvm_size" = "0x2800" @@ -603,6 +618,21 @@ chip soc/intel/alderlake register "nvm_readonly" = "0x01" register "nvm_width" = "0x10" + register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D0" + + register "has_power_resource" = "1" + + #Controls + register "gpio_panel.gpio[0].gpio_num" = "GPP_D16" #EN_WCAM_PWR + + #_ON + register "on_seq.ops_cnt" = "1" + register "on_seq.ops[0]" = "SEQ_OPS_GPIO_ENABLE(0, 0)" + + #_OFF + register "off_seq.ops_cnt" = "1" + register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" + device i2c 58 on probe WFC WFC_MIPI_OVTI8856 end @@ -623,6 +653,8 @@ chip soc/intel/alderlake register "link_freq[1]" = "180 * MHz" # 180 MHz register "remote_name" = ""IPU0"" + register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD" + register "has_power_resource" = "1" #Controls register "clk_panel.clks[0].clknum" = "IMGCLKOUT_3" @@ -657,9 +689,23 @@ chip soc/intel/alderlake register "chip_name" = ""DW AF DAC"" register "device_type" = "INTEL_ACPI_CAMERA_VCM" - register "pr0" = ""\\_SB.PCI0.I2C0.CAM0.PRIC"" register "vcm_compat" = ""dongwoon,dw9714"" + register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D0" + + register "has_power_resource" = "1" + + #Controls + register "gpio_panel.gpio[0].gpio_num" = "GPP_D16" #EN_WCAM_PWR + + #_ON + register "on_seq.ops_cnt" = "1" + register "on_seq.ops[0]" = "SEQ_OPS_GPIO_ENABLE(0, 0)" + + #_OFF + register "off_seq.ops_cnt" = "1" + register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" + device i2c 0C on probe WFC WFC_MIPI_KBAE350 end @@ -670,7 +716,6 @@ chip soc/intel/alderlake register "chip_name" = ""GT24C08"" register "device_type" = "INTEL_ACPI_CAMERA_NVM" - register "pr0" = ""\\_SB.PCI0.I2C0.CAM0.PRIC"" register "nvm_compat" = ""atmel,24c08"" register "nvm_size" = "0x2000" @@ -678,6 +723,21 @@ chip soc/intel/alderlake register "nvm_readonly" = "0x01" register "nvm_width" = "0x10" + register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D0" + + register "has_power_resource" = "1" + + #Controls + register "gpio_panel.gpio[0].gpio_num" = "GPP_D16" #EN_WCAM_PWR + + #_ON + register "on_seq.ops_cnt" = "1" + register "on_seq.ops[0]" = "SEQ_OPS_GPIO_ENABLE(0, 0)" + + #_OFF + register "off_seq.ops_cnt" = "1" + register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" + device i2c 50 on probe WFC WFC_MIPI_KBAE350 end @@ -800,6 +860,7 @@ chip soc/intel/alderlake register "link_freq[0]" = "384 * MHz" # 384 MHz register "link_freq[1]" = "96 * MHz" # 96 MHz register "remote_name" = ""IPU0"" + register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD" register "has_power_resource" = "1" #Controls @@ -834,7 +895,6 @@ chip soc/intel/alderlake register "chip_name" = ""GT24C16S"" register "device_type" = "INTEL_ACPI_CAMERA_NVM" - register "pr0" = ""\\_SB.PCI0.I2C2.CAM1.PRIC"" register "nvm_compat" = ""atmel,24c1024"" register "nvm_size" = "0x800" @@ -842,6 +902,21 @@ chip soc/intel/alderlake register "nvm_readonly" = "0x01" register "nvm_width" = "0x08" + register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D0" + + register "has_power_resource" = "1" + + #Controls + register "gpio_panel.gpio[0].gpio_num" = "GPP_C3" #PP3300_FCAM_X + + #_ON + register "on_seq.ops_cnt" = "1" + register "on_seq.ops[0]" = "SEQ_OPS_GPIO_ENABLE(0, 0)" + + #_OFF + register "off_seq.ops_cnt" = "1" + register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" + device i2c 50 on probe UFC UFC_MIPI_IMX208 end |