diff options
Diffstat (limited to 'src/mainboard')
| -rw-r--r-- | src/mainboard/google/brya/Kconfig.name | 2 | ||||
| -rw-r--r-- | src/mainboard/google/brya/variants/vell/gpio.c | 2 | ||||
| -rw-r--r-- | src/mainboard/google/brya/variants/vell/overridetree.cb | 69 |
3 files changed, 73 insertions, 0 deletions
diff --git a/src/mainboard/google/brya/Kconfig.name b/src/mainboard/google/brya/Kconfig.name index bbecefeb07..6128050c55 100644 --- a/src/mainboard/google/brya/Kconfig.name +++ b/src/mainboard/google/brya/Kconfig.name @@ -132,6 +132,8 @@ config BOARD_GOOGLE_VELL select BOARD_GOOGLE_BASEBOARD_BRYA select DRIVERS_GFX_GENERIC select SOC_INTEL_ENABLE_USB4_PCIE_RESOURCES + select DRIVERS_INTEL_MIPI_CAMERA + select SOC_INTEL_COMMON_BLOCK_IPU config BOARD_GOOGLE_TANIKS bool "-> Taniks" diff --git a/src/mainboard/google/brya/variants/vell/gpio.c b/src/mainboard/google/brya/variants/vell/gpio.c index 9e139d3285..b7ade2e14a 100644 --- a/src/mainboard/google/brya/variants/vell/gpio.c +++ b/src/mainboard/google/brya/variants/vell/gpio.c @@ -55,6 +55,8 @@ static const struct pad_config override_gpio_table[] = { PAD_CFG_NF(GPP_H15, NONE, DEEP, NF6), /* H17 : DDPB_CTRLDATA ==> USB_C3_AUX_DC_N */ PAD_CFG_NF(GPP_H17, NONE, DEEP, NF6), + /* H21 : IMGCLKOUT2 ==> UCAM_MCLK_R */ + PAD_CFG_NF(GPP_H21, NONE, DEEP, NF1), /* R4 : HDA_RST# ==> DMIC_CLK0_R */ PAD_CFG_NF(GPP_R4, NONE, DEEP, NF3), diff --git a/src/mainboard/google/brya/variants/vell/overridetree.cb b/src/mainboard/google/brya/variants/vell/overridetree.cb index 6ad37e076d..fff53b6972 100644 --- a/src/mainboard/google/brya/variants/vell/overridetree.cb +++ b/src/mainboard/google/brya/variants/vell/overridetree.cb @@ -137,6 +137,19 @@ chip soc/intel/alderlake device generic 0 on end end end + device ref ipu on + chip drivers/intel/mipi_camera + register "acpi_uid" = "0x50000" + register "acpi_name" = ""IPU0"" + register "device_type" = "INTEL_ACPI_CAMERA_CIO2" + + register "cio2_num_ports" = "1" + register "cio2_lanes_used" = "{4}" # 4 CSI Camera lanes are used + register "cio2_lane_endpoint[0]" = ""^I2C2.CAM0"" + register "cio2_prt[0]" = "2" + device generic 0 on end + end + end device ref pcie4_0 on # Enable CPU PCIE RP 1 using CLK 1 register "cpu_pcie_rp[CPU_RP(1)]" = "{ @@ -240,6 +253,62 @@ chip soc/intel/alderlake device i2c 40 on end end end + device ref i2c2 on + chip drivers/intel/mipi_camera + register "acpi_hid" = ""OVTI8856"" + register "acpi_uid" = "0" + register "acpi_name" = ""CAM0"" + register "chip_name" = ""Ov 8856 Camera"" + register "device_type" = "INTEL_ACPI_CAMERA_SENSOR" + register "has_power_resource" = "1" + + register "ssdb.lanes_used" = "4" + register "ssdb.link_used" = "0" + register "num_freq_entries" = "2" + register "link_freq[0]" = "360000000" + register "link_freq[1]" = "180000000" + register "remote_name" = ""IPU0"" + + #Controls + register "clk_panel.clks[0].clknum" = "IMGCLKOUT_2" + register "clk_panel.clks[0].freq" = "FREQ_19_2_MHZ" + + register "gpio_panel.gpio[0].gpio_num" = "GPP_F20" #reset + register "gpio_panel.gpio[1].gpio_num" = "GPP_C4" #power + + #_ON + register "on_seq.ops_cnt" = "5" + register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)" + register "on_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(1, 5)" + register "on_seq.ops[2]" = "SEQ_OPS_GPIO_ENABLE(1, 5)" + register "on_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(0, 5)" + register "on_seq.ops[4]" = "SEQ_OPS_GPIO_ENABLE(0, 5)" + + #_OFF + register "off_seq.ops_cnt" = "3" + register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" + register "off_seq.ops[1]" = "SEQ_OPS_CLK_DISABLE(0, 0)" + register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 0)" + + device i2c 36 on end + end + chip drivers/intel/mipi_camera + register "acpi_uid" = "1" + register "acpi_name" = ""NVM0"" + register "chip_name" = ""GT24C08"" + register "device_type" = "INTEL_ACPI_CAMERA_NVM" + + register "pr0" = ""\\_SB.PCI0.I2C2.CAM0.PRIC"" + register "nvm_compat" = ""atmel,24c1024"" + + register "nvm_size" = "0x2000" + register "nvm_pagesize" = "0x01" + register "nvm_readonly" = "0x01" + register "nvm_width" = "0x10" + + device i2c 50 on end + end + end device ref i2c5 on chip drivers/i2c/hid register "generic.hid" = ""ELAN2703"" |