diff options
Diffstat (limited to 'src/mainboard')
356 files changed, 1050 insertions, 999 deletions
diff --git a/src/mainboard/Makefile.romccboard.inc b/src/mainboard/Makefile.romccboard.inc index 71ad740589..fc25fda0d5 100644 --- a/src/mainboard/Makefile.romccboard.inc +++ b/src/mainboard/Makefile.romccboard.inc @@ -44,8 +44,8 @@ ldscript-y += ../../../../src/arch/i386/lib/failover.lds driver-y += mainboard.o -obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o ifdef POST_EVALUATION diff --git a/src/mainboard/a-trend/atc-6220/Config.lb b/src/mainboard/a-trend/atc-6220/Config.lb index 1d8635297e..b50b51637d 100644 --- a/src/mainboard/a-trend/atc-6220/Config.lb +++ b/src/mainboard/a-trend/atc-6220/Config.lb @@ -25,7 +25,7 @@ default CONFIG_XIP_ROM_BASE = 0xffffffff - CONFIG_XIP_ROM_SIZE + 1 arch i386 end driver mainboard.o -if CONFIG_HAVE_PIRQ_TABLE +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end makerule ./failover.E diff --git a/src/mainboard/a-trend/atc-6220/Options.lb b/src/mainboard/a-trend/atc-6220/Options.lb index 1f8e03beb4..68843932f1 100644 --- a/src/mainboard/a-trend/atc-6220/Options.lb +++ b/src/mainboard/a-trend/atc-6220/Options.lb @@ -18,8 +18,8 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -45,7 +45,7 @@ uses CONFIG_ROMBASE uses CONFIG_RAMBASE uses CONFIG_XIP_ROM_SIZE uses CONFIG_XIP_ROM_BASE -uses CONFIG_HAVE_MP_TABLE +uses CONFIG_GENERATE_MP_TABLE uses CONFIG_CROSS_COMPILE uses CC uses HOSTCC @@ -65,11 +65,11 @@ uses CONFIG_PCI_ROM_RUN default CONFIG_ROM_SIZE = 256 * 1024 default CONFIG_HAVE_FALLBACK_BOOT = 1 -default CONFIG_HAVE_MP_TABLE = 0 +default CONFIG_GENERATE_MP_TABLE = 0 default CONFIG_HAVE_HARD_RESET = 0 default CONFIG_UDELAY_TSC = 1 default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1 -default CONFIG_HAVE_PIRQ_TABLE = 1 +default CONFIG_GENERATE_PIRQ_TABLE = 1 default CONFIG_IRQ_SLOT_COUNT = 7 # Override this in targets/*/Config.lb. default CONFIG_MAINBOARD_VENDOR = "N/A" # Override this in targets/*/Config.lb. default CONFIG_MAINBOARD_PART_NUMBER = "N/A" # Override this in targets/*/Config.lb. diff --git a/src/mainboard/a-trend/atc-6240/Config.lb b/src/mainboard/a-trend/atc-6240/Config.lb index fdb4b0b468..420b0e1b4b 100644 --- a/src/mainboard/a-trend/atc-6240/Config.lb +++ b/src/mainboard/a-trend/atc-6240/Config.lb @@ -25,7 +25,7 @@ default CONFIG_XIP_ROM_BASE = 0xffffffff - CONFIG_XIP_ROM_SIZE + 1 arch i386 end driver mainboard.o -if CONFIG_HAVE_PIRQ_TABLE +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end makerule ./failover.E diff --git a/src/mainboard/a-trend/atc-6240/Options.lb b/src/mainboard/a-trend/atc-6240/Options.lb index 98b3a8cc15..7930819f12 100644 --- a/src/mainboard/a-trend/atc-6240/Options.lb +++ b/src/mainboard/a-trend/atc-6240/Options.lb @@ -18,8 +18,8 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -45,7 +45,7 @@ uses CONFIG_ROMBASE uses CONFIG_RAMBASE uses CONFIG_XIP_ROM_SIZE uses CONFIG_XIP_ROM_BASE -uses CONFIG_HAVE_MP_TABLE +uses CONFIG_GENERATE_MP_TABLE uses CONFIG_CROSS_COMPILE uses CC uses HOSTCC @@ -65,11 +65,11 @@ uses CONFIG_PCI_ROM_RUN default CONFIG_ROM_SIZE = 256 * 1024 default CONFIG_HAVE_FALLBACK_BOOT = 1 -default CONFIG_HAVE_MP_TABLE = 0 +default CONFIG_GENERATE_MP_TABLE = 0 default CONFIG_HAVE_HARD_RESET = 0 default CONFIG_UDELAY_TSC = 1 default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1 -default CONFIG_HAVE_PIRQ_TABLE = 1 +default CONFIG_GENERATE_PIRQ_TABLE = 1 default CONFIG_IRQ_SLOT_COUNT = 7 # Override this in targets/*/Config.lb. default CONFIG_MAINBOARD_VENDOR = "N/A" # Override this in targets/*/Config.lb. default CONFIG_MAINBOARD_PART_NUMBER = "N/A" # Override this in targets/*/Config.lb. diff --git a/src/mainboard/abit/be6-ii_v2_0/Config.lb b/src/mainboard/abit/be6-ii_v2_0/Config.lb index 86ebdc4c0c..5c8f8d0285 100644 --- a/src/mainboard/abit/be6-ii_v2_0/Config.lb +++ b/src/mainboard/abit/be6-ii_v2_0/Config.lb @@ -25,7 +25,7 @@ default CONFIG_XIP_ROM_BASE = 0xffffffff - CONFIG_XIP_ROM_SIZE + 1 arch i386 end driver mainboard.o -if CONFIG_HAVE_PIRQ_TABLE +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end makerule ./failover.E diff --git a/src/mainboard/abit/be6-ii_v2_0/Options.lb b/src/mainboard/abit/be6-ii_v2_0/Options.lb index 23b83f2016..c415fd21d0 100644 --- a/src/mainboard/abit/be6-ii_v2_0/Options.lb +++ b/src/mainboard/abit/be6-ii_v2_0/Options.lb @@ -18,8 +18,8 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -46,7 +46,7 @@ uses CONFIG_ROMBASE uses CONFIG_RAMBASE uses CONFIG_XIP_ROM_SIZE uses CONFIG_XIP_ROM_BASE -uses CONFIG_HAVE_MP_TABLE +uses CONFIG_GENERATE_MP_TABLE uses CONFIG_CROSS_COMPILE uses CC uses HOSTCC @@ -66,11 +66,11 @@ uses CONFIG_PCI_ROM_RUN default CONFIG_ROM_SIZE = 256 * 1024 # Override this in targets/*/Config.lb. default CONFIG_HAVE_FALLBACK_BOOT = 1 -default CONFIG_HAVE_MP_TABLE = 0 +default CONFIG_GENERATE_MP_TABLE = 0 default CONFIG_HAVE_HARD_RESET = 0 default CONFIG_UDELAY_TSC = 1 default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1 -default CONFIG_HAVE_PIRQ_TABLE = 1 +default CONFIG_GENERATE_PIRQ_TABLE = 1 default CONFIG_IRQ_SLOT_COUNT = 9 # Override this in targets/*/Config.lb. default CONFIG_MAINBOARD_VENDOR = "N/A" # Override this in targets/*/Config.lb. default CONFIG_MAINBOARD_PART_NUMBER = "N/A" # Override this in targets/*/Config.lb. diff --git a/src/mainboard/advantech/pcm-5820/Config.lb b/src/mainboard/advantech/pcm-5820/Config.lb index 3437d74b3f..96349a6d37 100644 --- a/src/mainboard/advantech/pcm-5820/Config.lb +++ b/src/mainboard/advantech/pcm-5820/Config.lb @@ -24,7 +24,7 @@ include /config/nofailovercalculation.lb arch i386 end driver mainboard.o -if CONFIG_HAVE_PIRQ_TABLE +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end makerule ./failover.E diff --git a/src/mainboard/advantech/pcm-5820/Options.lb b/src/mainboard/advantech/pcm-5820/Options.lb index 6fbde48591..684e4dce30 100644 --- a/src/mainboard/advantech/pcm-5820/Options.lb +++ b/src/mainboard/advantech/pcm-5820/Options.lb @@ -18,8 +18,8 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -72,11 +72,11 @@ default CONFIG_SPLASH_GRAPHIC = 1 default CONFIG_VIDEO_MB = 2 default CONFIG_ROM_SIZE = 256 * 1024 -default CONFIG_HAVE_PIRQ_TABLE = 1 +default CONFIG_GENERATE_PIRQ_TABLE = 1 default CONFIG_IRQ_SLOT_COUNT = 2 # Override this in targets/*/Config.lb. default CONFIG_PIRQ_ROUTE = 1 default CONFIG_HAVE_FALLBACK_BOOT = 1 -default CONFIG_HAVE_MP_TABLE = 0 +default CONFIG_GENERATE_MP_TABLE = 0 default CONFIG_HAVE_HARD_RESET = 0 default CONFIG_UDELAY_TSC = 1 default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1 diff --git a/src/mainboard/amd/db800/Config.lb b/src/mainboard/amd/db800/Config.lb index c82c664a7c..23da49ee0a 100644 --- a/src/mainboard/amd/db800/Config.lb +++ b/src/mainboard/amd/db800/Config.lb @@ -14,7 +14,7 @@ arch i386 end driver mainboard.o -if CONFIG_HAVE_PIRQ_TABLE +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end diff --git a/src/mainboard/amd/db800/Makefile.inc b/src/mainboard/amd/db800/Makefile.inc index eac4755d28..af947942fb 100644 --- a/src/mainboard/amd/db800/Makefile.inc +++ b/src/mainboard/amd/db800/Makefile.inc @@ -1,7 +1,7 @@ driver-y += mainboard.o # Needed by irq_tables and mptable and acpi_tables. -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o # This is part of the conversion to init-obj and away from included code. diff --git a/src/mainboard/amd/db800/Options.lb b/src/mainboard/amd/db800/Options.lb index 5452ad90da..236dd05a65 100644 --- a/src/mainboard/amd/db800/Options.lb +++ b/src/mainboard/amd/db800/Options.lb @@ -1,5 +1,5 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -27,7 +27,7 @@ uses CONFIG_ROMBASE uses CONFIG_RAMBASE uses CONFIG_XIP_ROM_SIZE uses CONFIG_XIP_ROM_BASE -uses CONFIG_HAVE_MP_TABLE +uses CONFIG_GENERATE_MP_TABLE uses CONFIG_CROSS_COMPILE uses CC uses HOSTCC @@ -67,7 +67,7 @@ default CONFIG_HAVE_FALLBACK_BOOT=1 ## ## no MP table ## -default CONFIG_HAVE_MP_TABLE=0 +default CONFIG_GENERATE_MP_TABLE=0 ## ## Build code to reset the motherboard from coreboot @@ -82,7 +82,7 @@ default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=4 default CONFIG_PIRQ_ROUTE=1 #object irq_tables.o diff --git a/src/mainboard/amd/dbm690t/Config.lb b/src/mainboard/amd/dbm690t/Config.lb index 9a3b6d93ad..68255eee8c 100644 --- a/src/mainboard/amd/dbm690t/Config.lb +++ b/src/mainboard/amd/dbm690t/Config.lb @@ -33,13 +33,13 @@ driver mainboard.o #dir /drivers/si/3114 -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object get_bus_conf.o object irq_tables.o end -if CONFIG_HAVE_ACPI_TABLES +if CONFIG_GENERATE_ACPI_TABLES object acpi_tables.o object fadt.o makerule dsdt.c diff --git a/src/mainboard/amd/dbm690t/Kconfig b/src/mainboard/amd/dbm690t/Kconfig index 75f9692665..f497bbac77 100644 --- a/src/mainboard/amd/dbm690t/Kconfig +++ b/src/mainboard/amd/dbm690t/Kconfig @@ -9,6 +9,7 @@ config BOARD_AMD_DBM690T select SOUTHBRIDGE_AMD_SB600 select SUPERIO_ITE_IT8712F select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE select USE_PRINTK_IN_CAR select USE_DCACHE_RAM select HAVE_HARD_RESET diff --git a/src/mainboard/amd/dbm690t/Makefile.inc b/src/mainboard/amd/dbm690t/Makefile.inc index 0a2460d166..317f9ca1c5 100644 --- a/src/mainboard/amd/dbm690t/Makefile.inc +++ b/src/mainboard/amd/dbm690t/Makefile.inc @@ -23,11 +23,11 @@ driver-y += mainboard.o # Needed by irq_tables and mptable and acpi_tables. obj-y += get_bus_conf.o -obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += dsdt.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += acpi_tables.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += fadt.o +obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += dsdt.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += acpi_tables.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += fadt.o # This is part of the conversion to init-obj and away from included code. diff --git a/src/mainboard/amd/dbm690t/Options.lb b/src/mainboard/amd/dbm690t/Options.lb index 467c91ea36..92378ebb10 100644 --- a/src/mainboard/amd/dbm690t/Options.lb +++ b/src/mainboard/amd/dbm690t/Options.lb @@ -19,9 +19,9 @@ ## ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE -uses CONFIG_HAVE_ACPI_TABLES +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE +uses CONFIG_GENERATE_ACPI_TABLES uses CONFIG_HAVE_ACPI_RESUME uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -120,17 +120,17 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=11 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ACPI tables will be included -default CONFIG_HAVE_ACPI_TABLES=1 +default CONFIG_GENERATE_ACPI_TABLES=1 ## ## Build code to export a CMOS option table diff --git a/src/mainboard/amd/dbm690t/mptable.c b/src/mainboard/amd/dbm690t/mptable.c index daaf4d2daa..4c71776931 100644 --- a/src/mainboard/amd/dbm690t/mptable.c +++ b/src/mainboard/amd/dbm690t/mptable.c @@ -142,7 +142,7 @@ void *smp_write_config_table(void *v) /* PCI interrupts are level triggered, and are * associated with a specific bus/device/function tuple. */ -#if CONFIG_HAVE_ACPI_TABLES == 0 +#if CONFIG_GENERATE_ACPI_TABLES == 0 #define PCI_INT(bus, dev, fn, pin) \ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), apicid_sb600, (pin)) #else diff --git a/src/mainboard/amd/norwich/Config.lb b/src/mainboard/amd/norwich/Config.lb index a92120e7c9..c49caf96e5 100644 --- a/src/mainboard/amd/norwich/Config.lb +++ b/src/mainboard/amd/norwich/Config.lb @@ -14,7 +14,7 @@ arch i386 end driver mainboard.o -if CONFIG_HAVE_PIRQ_TABLE +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end diff --git a/src/mainboard/amd/norwich/Makefile.inc b/src/mainboard/amd/norwich/Makefile.inc index eac4755d28..af947942fb 100644 --- a/src/mainboard/amd/norwich/Makefile.inc +++ b/src/mainboard/amd/norwich/Makefile.inc @@ -1,7 +1,7 @@ driver-y += mainboard.o # Needed by irq_tables and mptable and acpi_tables. -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o # This is part of the conversion to init-obj and away from included code. diff --git a/src/mainboard/amd/norwich/Options.lb b/src/mainboard/amd/norwich/Options.lb index f0ec118c6f..0ca20260f2 100644 --- a/src/mainboard/amd/norwich/Options.lb +++ b/src/mainboard/amd/norwich/Options.lb @@ -1,5 +1,5 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -27,7 +27,7 @@ uses CONFIG_ROMBASE uses CONFIG_RAMBASE uses CONFIG_XIP_ROM_SIZE uses CONFIG_XIP_ROM_BASE -uses CONFIG_HAVE_MP_TABLE +uses CONFIG_GENERATE_MP_TABLE uses CONFIG_CROSS_COMPILE uses CC uses HOSTCC @@ -67,7 +67,7 @@ default CONFIG_HAVE_FALLBACK_BOOT=1 ## ## no MP table ## -default CONFIG_HAVE_MP_TABLE=0 +default CONFIG_GENERATE_MP_TABLE=0 ## ## Build code to reset the motherboard from coreboot @@ -82,7 +82,7 @@ default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=6 default CONFIG_PIRQ_ROUTE=1 #object irq_tables.o diff --git a/src/mainboard/amd/pistachio/Config.lb b/src/mainboard/amd/pistachio/Config.lb index 33079a2607..e0458d3609 100644 --- a/src/mainboard/amd/pistachio/Config.lb +++ b/src/mainboard/amd/pistachio/Config.lb @@ -33,13 +33,13 @@ driver mainboard.o #dir /drivers/si/3114 -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object get_bus_conf.o object irq_tables.o end -if CONFIG_HAVE_ACPI_TABLES +if CONFIG_GENERATE_ACPI_TABLES object acpi_tables.o object fadt.o makerule dsdt.c diff --git a/src/mainboard/amd/pistachio/Kconfig b/src/mainboard/amd/pistachio/Kconfig index 170d1212eb..c8adde9ce1 100644 --- a/src/mainboard/amd/pistachio/Kconfig +++ b/src/mainboard/amd/pistachio/Kconfig @@ -8,6 +8,7 @@ config BOARD_AMD_PISTACHIO select SOUTHBRIDGE_AMD_RS690 select SOUTHBRIDGE_AMD_SB600 select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE select USE_PRINTK_IN_CAR select USE_DCACHE_RAM select HAVE_HARD_RESET diff --git a/src/mainboard/amd/pistachio/Makefile.inc b/src/mainboard/amd/pistachio/Makefile.inc index 0a2460d166..317f9ca1c5 100644 --- a/src/mainboard/amd/pistachio/Makefile.inc +++ b/src/mainboard/amd/pistachio/Makefile.inc @@ -23,11 +23,11 @@ driver-y += mainboard.o # Needed by irq_tables and mptable and acpi_tables. obj-y += get_bus_conf.o -obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += dsdt.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += acpi_tables.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += fadt.o +obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += dsdt.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += acpi_tables.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += fadt.o # This is part of the conversion to init-obj and away from included code. diff --git a/src/mainboard/amd/pistachio/Options.lb b/src/mainboard/amd/pistachio/Options.lb index 3260e65ac5..0082151c7d 100644 --- a/src/mainboard/amd/pistachio/Options.lb +++ b/src/mainboard/amd/pistachio/Options.lb @@ -19,9 +19,9 @@ ## ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE -uses CONFIG_HAVE_ACPI_TABLES +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE +uses CONFIG_GENERATE_ACPI_TABLES uses CONFIG_HAVE_ACPI_RESUME uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -118,17 +118,17 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=11 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ACPI tables will be included -default CONFIG_HAVE_ACPI_TABLES=1 +default CONFIG_GENERATE_ACPI_TABLES=1 ## ## Build code to export a CMOS option table diff --git a/src/mainboard/amd/pistachio/mptable.c b/src/mainboard/amd/pistachio/mptable.c index 23b38ca846..80ff410a7c 100644 --- a/src/mainboard/amd/pistachio/mptable.c +++ b/src/mainboard/amd/pistachio/mptable.c @@ -142,7 +142,7 @@ void *smp_write_config_table(void *v) /* PCI interrupts are level triggered, and are * associated with a specific bus/device/function tuple. */ -#if CONFIG_HAVE_ACPI_TABLES == 0 +#if CONFIG_GENERATE_ACPI_TABLES == 0 #define PCI_INT(bus, dev, fn, pin) \ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), apicid_sb600, (pin)) #else diff --git a/src/mainboard/amd/rumba/Config.lb b/src/mainboard/amd/rumba/Config.lb index 466703fcc3..56011ade44 100644 --- a/src/mainboard/amd/rumba/Config.lb +++ b/src/mainboard/amd/rumba/Config.lb @@ -14,7 +14,7 @@ arch i386 end driver mainboard.o -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end #object reset.o ## diff --git a/src/mainboard/amd/rumba/Options.lb b/src/mainboard/amd/rumba/Options.lb index a6549dcd75..e6a9b48cad 100644 --- a/src/mainboard/amd/rumba/Options.lb +++ b/src/mainboard/amd/rumba/Options.lb @@ -1,5 +1,5 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -26,7 +26,7 @@ uses CONFIG_ROMBASE uses CONFIG_RAMBASE uses CONFIG_XIP_ROM_SIZE uses CONFIG_XIP_ROM_BASE -uses CONFIG_HAVE_MP_TABLE +uses CONFIG_GENERATE_MP_TABLE uses CONFIG_CROSS_COMPILE uses CC uses HOSTCC @@ -55,7 +55,7 @@ default CONFIG_HAVE_FALLBACK_BOOT=1 ## ## no MP table ## -default CONFIG_HAVE_MP_TABLE=0 +default CONFIG_GENERATE_MP_TABLE=0 ## ## Build code to reset the motherboard from coreboot @@ -70,7 +70,7 @@ default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=2 #object irq_tables.o diff --git a/src/mainboard/amd/serengeti_cheetah/Config.lb b/src/mainboard/amd/serengeti_cheetah/Config.lb index 80d6318792..1e2f1b2046 100644 --- a/src/mainboard/amd/serengeti_cheetah/Config.lb +++ b/src/mainboard/amd/serengeti_cheetah/Config.lb @@ -15,15 +15,15 @@ driver mainboard.o #needed by irq_tables and mptable and acpi_tables object get_bus_conf.o -if CONFIG_HAVE_MP_TABLE +if CONFIG_GENERATE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end -#if CONFIG_HAVE_ACPI_TABLES +#if CONFIG_GENERATE_ACPI_TABLES # object acpi_tables.o # object fadt.o # if CONFIG_SB_HT_CHAIN_ON_BUS0 @@ -41,7 +41,7 @@ end # end #end -if CONFIG_HAVE_ACPI_TABLES +if CONFIG_GENERATE_ACPI_TABLES object acpi_tables.o object fadt.o makerule dsdt.c diff --git a/src/mainboard/amd/serengeti_cheetah/Kconfig b/src/mainboard/amd/serengeti_cheetah/Kconfig index dd2b105d8b..287d3d2156 100644 --- a/src/mainboard/amd/serengeti_cheetah/Kconfig +++ b/src/mainboard/amd/serengeti_cheetah/Kconfig @@ -9,6 +9,7 @@ config BOARD_AMD_SERENGETI_CHEETAH select SOUTHBRIDGE_AMD_AMD8131 select SUPERIO_WINBOND_W83627HF select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE select USE_PRINTK_IN_CAR select USE_DCACHE_RAM select HAVE_HARD_RESET diff --git a/src/mainboard/amd/serengeti_cheetah/Makefile.inc b/src/mainboard/amd/serengeti_cheetah/Makefile.inc index 19e58bd8ae..64797b1af0 100644 --- a/src/mainboard/amd/serengeti_cheetah/Makefile.inc +++ b/src/mainboard/amd/serengeti_cheetah/Makefile.inc @@ -23,11 +23,11 @@ driver-y += mainboard.o # Needed by irq_tables and mptable and acpi_tables. obj-y += get_bus_conf.o -obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += dsdt.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += acpi_tables.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += fadt.o +obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += dsdt.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += acpi_tables.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += fadt.o # ./ssdt.o is in northbridge/amd/amdk8/Config.lb obj-$(CONFIG_ACPI_SSDTX_NUM) += ssdt2.o diff --git a/src/mainboard/amd/serengeti_cheetah/Options.lb b/src/mainboard/amd/serengeti_cheetah/Options.lb index 9338e509e3..dc57febc81 100644 --- a/src/mainboard/amd/serengeti_cheetah/Options.lb +++ b/src/mainboard/amd/serengeti_cheetah/Options.lb @@ -1,6 +1,6 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE -uses CONFIG_HAVE_ACPI_TABLES +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE +uses CONFIG_GENERATE_ACPI_TABLES uses CONFIG_HAVE_ACPI_RESUME uses CONFIG_ACPI_SSDTX_NUM uses CONFIG_USE_FALLBACK_IMAGE @@ -123,17 +123,17 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=11 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ACPI tables will be included -default CONFIG_HAVE_ACPI_TABLES=1 +default CONFIG_GENERATE_ACPI_TABLES=1 ## extra SSDT num default CONFIG_ACPI_SSDTX_NUM=1 diff --git a/src/mainboard/amd/serengeti_cheetah_fam10/Config.lb b/src/mainboard/amd/serengeti_cheetah_fam10/Config.lb index 456ad0ecfd..da52d4d69a 100644 --- a/src/mainboard/amd/serengeti_cheetah_fam10/Config.lb +++ b/src/mainboard/amd/serengeti_cheetah_fam10/Config.lb @@ -33,15 +33,15 @@ driver mainboard.o #needed by irq_tables and mptable and acpi_tables object get_bus_conf.o -if CONFIG_HAVE_MP_TABLE +if CONFIG_GENERATE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end -if CONFIG_HAVE_ACPI_TABLES +if CONFIG_GENERATE_ACPI_TABLES object acpi_tables.o object fadt.o makerule dsdt.c diff --git a/src/mainboard/amd/serengeti_cheetah_fam10/Kconfig b/src/mainboard/amd/serengeti_cheetah_fam10/Kconfig index 1feca96edb..df024f5c2b 100644 --- a/src/mainboard/amd/serengeti_cheetah_fam10/Kconfig +++ b/src/mainboard/amd/serengeti_cheetah_fam10/Kconfig @@ -9,6 +9,7 @@ config BOARD_AMD_SERENGETI_CHEETAH_FAM10 select SOUTHBRIDGE_AMD_AMD8132 select SUPERIO_WINBOND_W83627HF select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE select USE_PRINTK_IN_CAR select USE_DCACHE_RAM select HAVE_HARD_RESET diff --git a/src/mainboard/amd/serengeti_cheetah_fam10/Makefile.inc b/src/mainboard/amd/serengeti_cheetah_fam10/Makefile.inc index 0966e03501..617750e905 100644 --- a/src/mainboard/amd/serengeti_cheetah_fam10/Makefile.inc +++ b/src/mainboard/amd/serengeti_cheetah_fam10/Makefile.inc @@ -23,17 +23,17 @@ driver-y += mainboard.o # Needed by irq_tables and mptable and acpi_tables. obj-y += get_bus_conf.o -obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += dsdt.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += acpi_tables.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += fadt.o +obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += dsdt.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += acpi_tables.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += fadt.o # ./ssdt.o is in northbridge/amd/amdfam10/Makefile.inc -obj-$(CONFIG_HAVE_ACPI_TABLES) += ssdt2.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += ssdt3.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += ssdt4.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += ssdt5.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += ssdt2.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += ssdt3.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += ssdt4.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += ssdt5.o driver-y += ../../../drivers/i2c/i2cmux2/i2cmux2.o diff --git a/src/mainboard/amd/serengeti_cheetah_fam10/Options.lb b/src/mainboard/amd/serengeti_cheetah_fam10/Options.lb index 986722376f..a5ba422069 100644 --- a/src/mainboard/amd/serengeti_cheetah_fam10/Options.lb +++ b/src/mainboard/amd/serengeti_cheetah_fam10/Options.lb @@ -17,9 +17,9 @@ # Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA # -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE -uses CONFIG_HAVE_ACPI_TABLES +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE +uses CONFIG_GENERATE_ACPI_TABLES uses CONFIG_HAVE_ACPI_RESUME uses CONFIG_ACPI_SSDTX_NUM uses CONFIG_USE_FALLBACK_IMAGE @@ -151,17 +151,17 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=11 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ACPI tables will be included -default CONFIG_HAVE_ACPI_TABLES=1 +default CONFIG_GENERATE_ACPI_TABLES=1 ## extra SSDT num default CONFIG_ACPI_SSDTX_NUM=31 diff --git a/src/mainboard/arima/hdama/Config.lb b/src/mainboard/arima/hdama/Config.lb index 89174f1a2a..276b4704b3 100644 --- a/src/mainboard/arima/hdama/Config.lb +++ b/src/mainboard/arima/hdama/Config.lb @@ -13,8 +13,8 @@ arch i386 end ## driver mainboard.o -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end if CONFIG_USE_INIT diff --git a/src/mainboard/arima/hdama/Kconfig b/src/mainboard/arima/hdama/Kconfig index 25a277a013..7c2e6c26c1 100644 --- a/src/mainboard/arima/hdama/Kconfig +++ b/src/mainboard/arima/hdama/Kconfig @@ -9,6 +9,7 @@ config BOARD_ARIMA_HDAMA select SOUTHBRIDGE_AMD_AMD8131 select SUPERIO_NSC_PC87360 select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE select USE_PRINTK_IN_CAR select USE_DCACHE_RAM select HAVE_HARD_RESET diff --git a/src/mainboard/arima/hdama/Makefile.inc b/src/mainboard/arima/hdama/Makefile.inc index 5ad2d55673..9727e0058c 100644 --- a/src/mainboard/arima/hdama/Makefile.inc +++ b/src/mainboard/arima/hdama/Makefile.inc @@ -22,8 +22,8 @@ driver-y += mainboard.o # Needed by irq_tables and mptable. -obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o # This is part of the conversion to init-obj and away from included code. diff --git a/src/mainboard/arima/hdama/Options.lb b/src/mainboard/arima/hdama/Options.lb index b88764ea75..c047282de6 100644 --- a/src/mainboard/arima/hdama/Options.lb +++ b/src/mainboard/arima/hdama/Options.lb @@ -1,5 +1,5 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -88,14 +88,14 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=9 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ## Build code to export a CMOS option table diff --git a/src/mainboard/artecgroup/dbe61/Config.lb b/src/mainboard/artecgroup/dbe61/Config.lb index 41c77e0243..0288c988db 100644 --- a/src/mainboard/artecgroup/dbe61/Config.lb +++ b/src/mainboard/artecgroup/dbe61/Config.lb @@ -14,7 +14,7 @@ arch i386 end driver mainboard.o -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end #object reset.o #compile cache_as_ram.c to auto.inc diff --git a/src/mainboard/artecgroup/dbe61/Makefile.inc b/src/mainboard/artecgroup/dbe61/Makefile.inc index 90b154a4e1..4a26b97508 100644 --- a/src/mainboard/artecgroup/dbe61/Makefile.inc +++ b/src/mainboard/artecgroup/dbe61/Makefile.inc @@ -1,7 +1,7 @@ driver-y += mainboard.o # Needed by irq_tables and mptable and acpi_tables. -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o # This is part of the conversion to init-obj and away from included code. diff --git a/src/mainboard/artecgroup/dbe61/Options.lb b/src/mainboard/artecgroup/dbe61/Options.lb index 07325a1df0..3aebf7446c 100644 --- a/src/mainboard/artecgroup/dbe61/Options.lb +++ b/src/mainboard/artecgroup/dbe61/Options.lb @@ -1,5 +1,5 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -27,7 +27,7 @@ uses CONFIG_ROMBASE uses CONFIG_RAMBASE uses CONFIG_XIP_ROM_SIZE uses CONFIG_XIP_ROM_BASE -uses CONFIG_HAVE_MP_TABLE +uses CONFIG_GENERATE_MP_TABLE uses CONFIG_CROSS_COMPILE uses CC uses HOSTCC @@ -67,7 +67,7 @@ default CONFIG_HAVE_FALLBACK_BOOT=1 ## ## no MP table ## -default CONFIG_HAVE_MP_TABLE=0 +default CONFIG_GENERATE_MP_TABLE=0 ## ## Build code to reset the motherboard from coreboot @@ -82,7 +82,7 @@ default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=3 default CONFIG_PIRQ_ROUTE=1 #object irq_tables.o diff --git a/src/mainboard/asi/mb_5blgp/Config.lb b/src/mainboard/asi/mb_5blgp/Config.lb index 08010fa236..1049f338d0 100644 --- a/src/mainboard/asi/mb_5blgp/Config.lb +++ b/src/mainboard/asi/mb_5blgp/Config.lb @@ -24,7 +24,7 @@ include /config/nofailovercalculation.lb arch i386 end driver mainboard.o -if CONFIG_HAVE_PIRQ_TABLE +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end makerule ./failover.E diff --git a/src/mainboard/asi/mb_5blgp/Options.lb b/src/mainboard/asi/mb_5blgp/Options.lb index 968ec2f92a..7865fa3251 100644 --- a/src/mainboard/asi/mb_5blgp/Options.lb +++ b/src/mainboard/asi/mb_5blgp/Options.lb @@ -18,8 +18,8 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -72,11 +72,11 @@ default CONFIG_SPLASH_GRAPHIC = 1 default CONFIG_VIDEO_MB = 2 default CONFIG_ROM_SIZE = 256 * 1024 -default CONFIG_HAVE_PIRQ_TABLE = 1 +default CONFIG_GENERATE_PIRQ_TABLE = 1 default CONFIG_IRQ_SLOT_COUNT = 3 # Override this in targets/*/Config.lb. default CONFIG_PIRQ_ROUTE = 1 default CONFIG_HAVE_FALLBACK_BOOT = 1 -default CONFIG_HAVE_MP_TABLE = 0 +default CONFIG_GENERATE_MP_TABLE = 0 default CONFIG_HAVE_HARD_RESET = 0 default CONFIG_UDELAY_TSC = 1 default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1 diff --git a/src/mainboard/asi/mb_5blmp/Config.lb b/src/mainboard/asi/mb_5blmp/Config.lb index f0008f7a65..7a065091df 100644 --- a/src/mainboard/asi/mb_5blmp/Config.lb +++ b/src/mainboard/asi/mb_5blmp/Config.lb @@ -14,7 +14,7 @@ arch i386 end driver mainboard.o -if CONFIG_HAVE_PIRQ_TABLE +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end diff --git a/src/mainboard/asi/mb_5blmp/Options.lb b/src/mainboard/asi/mb_5blmp/Options.lb index dbc0de1531..571ec06518 100644 --- a/src/mainboard/asi/mb_5blmp/Options.lb +++ b/src/mainboard/asi/mb_5blmp/Options.lb @@ -1,4 +1,4 @@ -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -67,7 +67,7 @@ default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=5 default CONFIG_PIRQ_ROUTE=1 diff --git a/src/mainboard/asus/a8n_e/Config.lb b/src/mainboard/asus/a8n_e/Config.lb index 72380d9e8a..b49951400f 100644 --- a/src/mainboard/asus/a8n_e/Config.lb +++ b/src/mainboard/asus/a8n_e/Config.lb @@ -29,8 +29,8 @@ arch i386 end driver mainboard.o # Needed by irq_tables and mptable and acpi_tables. object get_bus_conf.o -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end if CONFIG_USE_INIT makerule ./auto.o depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h" diff --git a/src/mainboard/asus/a8n_e/Kconfig b/src/mainboard/asus/a8n_e/Kconfig index b495ad5e29..08321ae3a2 100644 --- a/src/mainboard/asus/a8n_e/Kconfig +++ b/src/mainboard/asus/a8n_e/Kconfig @@ -8,6 +8,7 @@ config BOARD_ASUS_A8N_E select SOUTHBRIDGE_NVIDIA_CK804 select SUPERIO_ITE_IT8712F select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE select USE_PRINTK_IN_CAR select USE_DCACHE_RAM select HAVE_HARD_RESET diff --git a/src/mainboard/asus/a8n_e/Makefile.inc b/src/mainboard/asus/a8n_e/Makefile.inc index bfba66832d..6bbef3cfff 100644 --- a/src/mainboard/asus/a8n_e/Makefile.inc +++ b/src/mainboard/asus/a8n_e/Makefile.inc @@ -23,8 +23,8 @@ driver-y += mainboard.o # Needed by irq_tables and mptable and acpi_tables. obj-y += get_bus_conf.o -obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o # This is part of the conversion to init-obj and away from included code. diff --git a/src/mainboard/asus/a8n_e/Options.lb b/src/mainboard/asus/a8n_e/Options.lb index 71607d87fc..50a15848a8 100644 --- a/src/mainboard/asus/a8n_e/Options.lb +++ b/src/mainboard/asus/a8n_e/Options.lb @@ -19,8 +19,8 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_USE_FAILOVER_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -103,9 +103,9 @@ default CONFIG_FAILOVER_SIZE = 4 * 1024 default CONFIG_HAVE_FALLBACK_BOOT = 1 default CONFIG_HAVE_FAILOVER_BOOT = 1 default CONFIG_HAVE_HARD_RESET = 1 -default CONFIG_HAVE_PIRQ_TABLE = 1 +default CONFIG_GENERATE_PIRQ_TABLE = 1 default CONFIG_IRQ_SLOT_COUNT = 13 -default CONFIG_HAVE_MP_TABLE = 1 +default CONFIG_GENERATE_MP_TABLE = 1 default CONFIG_HAVE_OPTION_TABLE = 1 # Move the default coreboot CMOS range off of AMD RTC registers. default CONFIG_LB_CKS_RANGE_START = 49 diff --git a/src/mainboard/asus/a8v-e_se/Config.lb b/src/mainboard/asus/a8v-e_se/Config.lb index 242c104eac..0b10bb91b1 100644 --- a/src/mainboard/asus/a8v-e_se/Config.lb +++ b/src/mainboard/asus/a8v-e_se/Config.lb @@ -28,7 +28,7 @@ default CONFIG_ROM_PAYLOAD = 1 arch i386 end driver mainboard.o -if CONFIG_HAVE_ACPI_TABLES +if CONFIG_GENERATE_ACPI_TABLES object acpi_tables.o makerule dsdt.c depends "$(CONFIG_MAINBOARD)/dsdt.asl" @@ -37,8 +37,8 @@ if CONFIG_HAVE_ACPI_TABLES end object ./dsdt.o end -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end # object reset.o if CONFIG_USE_INIT diff --git a/src/mainboard/asus/a8v-e_se/Kconfig b/src/mainboard/asus/a8v-e_se/Kconfig index bf23b81255..b25a8b6577 100644 --- a/src/mainboard/asus/a8v-e_se/Kconfig +++ b/src/mainboard/asus/a8v-e_se/Kconfig @@ -12,6 +12,7 @@ config BOARD_ASUS_A8V_E_SE select HAVE_HARD_RESET select IOAPIC select HAVE_ACPI_TABLES + select HAVE_MP_TABLE config MAINBOARD_DIR string diff --git a/src/mainboard/asus/a8v-e_se/Makefile.inc b/src/mainboard/asus/a8v-e_se/Makefile.inc index 77348fd79f..ab30fbcfc1 100644 --- a/src/mainboard/asus/a8v-e_se/Makefile.inc +++ b/src/mainboard/asus/a8v-e_se/Makefile.inc @@ -1,10 +1,10 @@ driver-y += mainboard.o # Needed by irq_tables and mptable and acpi_tables. -obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += dsdt.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += acpi_tables.o +obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += dsdt.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += acpi_tables.o # This is part of the conversion to init-obj and away from included code. diff --git a/src/mainboard/asus/a8v-e_se/Options.lb b/src/mainboard/asus/a8v-e_se/Options.lb index cecf43970a..bdf0972612 100644 --- a/src/mainboard/asus/a8v-e_se/Options.lb +++ b/src/mainboard/asus/a8v-e_se/Options.lb @@ -17,8 +17,8 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -42,7 +42,7 @@ uses CONFIG_STACK_SIZE uses CONFIG_HEAP_SIZE # uses CONFIG_USE_OPTION_TABLE # uses CONFIG_LB_MEM_TOPK -uses CONFIG_HAVE_ACPI_TABLES +uses CONFIG_GENERATE_ACPI_TABLES uses CONFIG_HAVE_ACPI_RESUME uses CONFIG_LB_CKS_RANGE_START uses CONFIG_LB_CKS_RANGE_END @@ -94,8 +94,8 @@ default CONFIG_ROM_SIZE = 512 * 1024 default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE default CONFIG_HAVE_FALLBACK_BOOT = 1 default CONFIG_HAVE_HARD_RESET = 0 -default CONFIG_HAVE_PIRQ_TABLE = 0 -default CONFIG_HAVE_MP_TABLE = 1 +default CONFIG_GENERATE_PIRQ_TABLE = 0 +default CONFIG_GENERATE_MP_TABLE = 1 default CONFIG_HAVE_OPTION_TABLE = 0 # FIXME # Move the default coreboot CMOS range off of AMD RTC registers. default CONFIG_LB_CKS_RANGE_START = 49 @@ -105,7 +105,7 @@ default CONFIG_SMP = 1 default CONFIG_MAX_CPUS = 2 default CONFIG_MAX_PHYSICAL_CPUS = 1 default CONFIG_LOGICAL_CPUS = 1 -default CONFIG_HAVE_ACPI_TABLES = 1 +default CONFIG_GENERATE_ACPI_TABLES = 1 # 1G memory hole # bx_b001- default K8_HW_MEM_HOLE_SIZEK = 0x100000 diff --git a/src/mainboard/asus/m2v-mx_se/Config.lb b/src/mainboard/asus/m2v-mx_se/Config.lb index c7f7d6e51a..908d1b7309 100644 --- a/src/mainboard/asus/m2v-mx_se/Config.lb +++ b/src/mainboard/asus/m2v-mx_se/Config.lb @@ -27,7 +27,7 @@ include /config/nofailovercalculation.lb arch i386 end driver mainboard.o -if CONFIG_HAVE_ACPI_TABLES +if CONFIG_GENERATE_ACPI_TABLES object acpi_tables.o makerule dsdt.c depends "$(CONFIG_MAINBOARD)/dsdt.asl" diff --git a/src/mainboard/asus/m2v-mx_se/Makefile.inc b/src/mainboard/asus/m2v-mx_se/Makefile.inc index 24b2680c3e..4ae1e1f6ce 100644 --- a/src/mainboard/asus/m2v-mx_se/Makefile.inc +++ b/src/mainboard/asus/m2v-mx_se/Makefile.inc @@ -23,8 +23,8 @@ driver-y += mainboard.o #needed by irq_tables and mptable and acpi_tables -obj-$(CONFIG_HAVE_ACPI_TABLES) += dsdt.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += acpi_tables.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += dsdt.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += acpi_tables.o # This is part of the conversion to init-obj and away from included code. diff --git a/src/mainboard/asus/m2v-mx_se/Options.lb b/src/mainboard/asus/m2v-mx_se/Options.lb index c8e6c98787..94e57f941b 100644 --- a/src/mainboard/asus/m2v-mx_se/Options.lb +++ b/src/mainboard/asus/m2v-mx_se/Options.lb @@ -17,8 +17,8 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -42,7 +42,7 @@ uses CONFIG_STACK_SIZE uses CONFIG_HEAP_SIZE uses CONFIG_USE_OPTION_TABLE uses CONFIG_LB_MEM_TOPK -uses CONFIG_HAVE_ACPI_TABLES +uses CONFIG_GENERATE_ACPI_TABLES uses CONFIG_HAVE_MAINBOARD_RESOURCES uses CONFIG_HAVE_ACPI_RESUME uses CONFIG_HAVE_LOW_TABLES @@ -95,8 +95,8 @@ uses CONFIG_USE_PRINTK_IN_CAR default CONFIG_HAVE_FALLBACK_BOOT = 1 default CONFIG_HAVE_HARD_RESET = 1 -default CONFIG_HAVE_PIRQ_TABLE = 0 -default CONFIG_HAVE_MP_TABLE = 0 +default CONFIG_GENERATE_PIRQ_TABLE = 0 +default CONFIG_GENERATE_MP_TABLE = 0 default CONFIG_HAVE_OPTION_TABLE = 1 # FIXME # Move the default coreboot CMOS range off of AMD RTC registers. default CONFIG_LB_CKS_RANGE_START = 49 @@ -106,7 +106,7 @@ default CONFIG_SMP = 1 default CONFIG_MAX_CPUS = 2 default CONFIG_MAX_PHYSICAL_CPUS = 1 default CONFIG_LOGICAL_CPUS = 1 -default CONFIG_HAVE_ACPI_TABLES = 1 +default CONFIG_GENERATE_ACPI_TABLES = 1 default CONFIG_HAVE_MAINBOARD_RESOURCES = 1 default CONFIG_HAVE_LOW_TABLES = 0 default CONFIG_HAVE_ACPI_RESUME = 1 diff --git a/src/mainboard/asus/mew-am/Config.lb b/src/mainboard/asus/mew-am/Config.lb index c6486831df..21264881a5 100644 --- a/src/mainboard/asus/mew-am/Config.lb +++ b/src/mainboard/asus/mew-am/Config.lb @@ -24,7 +24,7 @@ include /config/nofailovercalculation.lb arch i386 end driver mainboard.o -if CONFIG_HAVE_PIRQ_TABLE +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end makerule ./failover.E diff --git a/src/mainboard/asus/mew-am/Options.lb b/src/mainboard/asus/mew-am/Options.lb index ce98c2f47c..c62bf48e49 100644 --- a/src/mainboard/asus/mew-am/Options.lb +++ b/src/mainboard/asus/mew-am/Options.lb @@ -18,8 +18,8 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -45,7 +45,7 @@ uses CONFIG_ROMBASE uses CONFIG_RAMBASE uses CONFIG_XIP_ROM_SIZE uses CONFIG_XIP_ROM_BASE -uses CONFIG_HAVE_MP_TABLE +uses CONFIG_GENERATE_MP_TABLE uses CONFIG_CROSS_COMPILE uses CC uses HOSTCC @@ -65,11 +65,11 @@ uses CONFIG_PCI_ROM_RUN default CONFIG_ROM_SIZE = 512 * 1024 # Override this in targets/*/Config.lb. default CONFIG_HAVE_FALLBACK_BOOT = 1 -default CONFIG_HAVE_MP_TABLE = 0 +default CONFIG_GENERATE_MP_TABLE = 0 default CONFIG_HAVE_HARD_RESET = 0 default CONFIG_UDELAY_TSC = 1 default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1 -default CONFIG_HAVE_PIRQ_TABLE = 1 +default CONFIG_GENERATE_PIRQ_TABLE = 1 default CONFIG_IRQ_SLOT_COUNT = 8 # Override this in targets/*/Config.lb. default CONFIG_MAINBOARD_VENDOR = "N/A" # Override this in targets/*/Config.lb. default CONFIG_MAINBOARD_PART_NUMBER = "N/A" # Override this in targets/*/Config.lb. diff --git a/src/mainboard/asus/mew-vm/Config.lb b/src/mainboard/asus/mew-vm/Config.lb index 60f4e152b6..4f748b74ea 100644 --- a/src/mainboard/asus/mew-vm/Config.lb +++ b/src/mainboard/asus/mew-vm/Config.lb @@ -14,7 +14,7 @@ arch i386 end driver mainboard.o -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end #object reset.o ## diff --git a/src/mainboard/asus/mew-vm/Options.lb b/src/mainboard/asus/mew-vm/Options.lb index 72488a2f32..779f0ed89b 100644 --- a/src/mainboard/asus/mew-vm/Options.lb +++ b/src/mainboard/asus/mew-vm/Options.lb @@ -1,5 +1,5 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -26,7 +26,7 @@ uses CONFIG_ROMBASE uses CONFIG_RAMBASE uses CONFIG_XIP_ROM_SIZE uses CONFIG_XIP_ROM_BASE -uses CONFIG_HAVE_MP_TABLE +uses CONFIG_GENERATE_MP_TABLE uses CONFIG_CROSS_COMPILE uses CC uses HOSTCC @@ -55,7 +55,7 @@ default CONFIG_HAVE_FALLBACK_BOOT = 1 ## ## no MP table ## -default CONFIG_HAVE_MP_TABLE = 0 +default CONFIG_GENERATE_MP_TABLE = 0 ## ## Build code to reset the motherboard from coreboot @@ -65,7 +65,7 @@ default CONFIG_HAVE_HARD_RESET = 0 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE = 1 +default CONFIG_GENERATE_PIRQ_TABLE = 1 default CONFIG_IRQ_SLOT_COUNT = 11 ## diff --git a/src/mainboard/asus/p2b-d/Config.lb b/src/mainboard/asus/p2b-d/Config.lb index 6e4989e9aa..744860b889 100644 --- a/src/mainboard/asus/p2b-d/Config.lb +++ b/src/mainboard/asus/p2b-d/Config.lb @@ -25,8 +25,8 @@ default CONFIG_XIP_ROM_BASE = 0xffffffff - CONFIG_XIP_ROM_SIZE + 1 arch i386 end driver mainboard.o -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end makerule ./failover.E depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc" action "../romcc -E -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@" diff --git a/src/mainboard/asus/p2b-d/Options.lb b/src/mainboard/asus/p2b-d/Options.lb index 5239f7e9b0..2ccd3a9d26 100644 --- a/src/mainboard/asus/p2b-d/Options.lb +++ b/src/mainboard/asus/p2b-d/Options.lb @@ -18,8 +18,8 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -46,7 +46,7 @@ uses CONFIG_ROMBASE uses CONFIG_RAMBASE uses CONFIG_XIP_ROM_SIZE uses CONFIG_XIP_ROM_BASE -uses CONFIG_HAVE_MP_TABLE +uses CONFIG_GENERATE_MP_TABLE uses CONFIG_CROSS_COMPILE uses CC uses HOSTCC @@ -69,11 +69,11 @@ uses CONFIG_IOAPIC default CONFIG_ROM_SIZE = 256 * 1024 default CONFIG_HAVE_FALLBACK_BOOT = 1 -default CONFIG_HAVE_MP_TABLE = 1 +default CONFIG_GENERATE_MP_TABLE = 1 default CONFIG_HAVE_HARD_RESET = 0 default CONFIG_UDELAY_TSC = 1 default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1 -default CONFIG_HAVE_PIRQ_TABLE = 1 +default CONFIG_GENERATE_PIRQ_TABLE = 1 default CONFIG_IRQ_SLOT_COUNT = 6 # Override this in targets/*/Config.lb. default CONFIG_MAINBOARD_VENDOR = "N/A" # Override this in targets/*/Config.lb. default CONFIG_MAINBOARD_PART_NUMBER = "N/A" # Override this in targets/*/Config.lb. diff --git a/src/mainboard/asus/p2b-ds/Config.lb b/src/mainboard/asus/p2b-ds/Config.lb index bd84903ed2..2e48b71bd0 100644 --- a/src/mainboard/asus/p2b-ds/Config.lb +++ b/src/mainboard/asus/p2b-ds/Config.lb @@ -25,8 +25,8 @@ default CONFIG_XIP_ROM_BASE = 0xffffffff - CONFIG_XIP_ROM_SIZE + 1 arch i386 end driver mainboard.o -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end makerule ./failover.E depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc" action "../romcc -E -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@" diff --git a/src/mainboard/asus/p2b-ds/Options.lb b/src/mainboard/asus/p2b-ds/Options.lb index b30daf8c92..45214cf0a3 100644 --- a/src/mainboard/asus/p2b-ds/Options.lb +++ b/src/mainboard/asus/p2b-ds/Options.lb @@ -18,8 +18,8 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -46,7 +46,7 @@ uses CONFIG_ROMBASE uses CONFIG_RAMBASE uses CONFIG_XIP_ROM_SIZE uses CONFIG_XIP_ROM_BASE -uses CONFIG_HAVE_MP_TABLE +uses CONFIG_GENERATE_MP_TABLE uses CONFIG_CROSS_COMPILE uses CC uses HOSTCC @@ -69,11 +69,11 @@ uses CONFIG_IOAPIC default CONFIG_ROM_SIZE = 256 * 1024 default CONFIG_HAVE_FALLBACK_BOOT = 1 -default CONFIG_HAVE_MP_TABLE = 1 +default CONFIG_GENERATE_MP_TABLE = 1 default CONFIG_HAVE_HARD_RESET = 0 default CONFIG_UDELAY_TSC = 1 default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1 -default CONFIG_HAVE_PIRQ_TABLE = 1 +default CONFIG_GENERATE_PIRQ_TABLE = 1 default CONFIG_IRQ_SLOT_COUNT = 7 # Override this in targets/*/Config.lb. default CONFIG_MAINBOARD_VENDOR = "N/A" # Override this in targets/*/Config.lb. default CONFIG_MAINBOARD_PART_NUMBER = "N/A" # Override this in targets/*/Config.lb. diff --git a/src/mainboard/asus/p2b-f/Config.lb b/src/mainboard/asus/p2b-f/Config.lb index d4a1e8600e..5813cca2a2 100644 --- a/src/mainboard/asus/p2b-f/Config.lb +++ b/src/mainboard/asus/p2b-f/Config.lb @@ -25,7 +25,7 @@ default CONFIG_XIP_ROM_BASE = 0xffffffff - CONFIG_XIP_ROM_SIZE + 1 arch i386 end driver mainboard.o -if CONFIG_HAVE_PIRQ_TABLE +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end makerule ./failover.E diff --git a/src/mainboard/asus/p2b-f/Options.lb b/src/mainboard/asus/p2b-f/Options.lb index 1f8e03beb4..68843932f1 100644 --- a/src/mainboard/asus/p2b-f/Options.lb +++ b/src/mainboard/asus/p2b-f/Options.lb @@ -18,8 +18,8 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -45,7 +45,7 @@ uses CONFIG_ROMBASE uses CONFIG_RAMBASE uses CONFIG_XIP_ROM_SIZE uses CONFIG_XIP_ROM_BASE -uses CONFIG_HAVE_MP_TABLE +uses CONFIG_GENERATE_MP_TABLE uses CONFIG_CROSS_COMPILE uses CC uses HOSTCC @@ -65,11 +65,11 @@ uses CONFIG_PCI_ROM_RUN default CONFIG_ROM_SIZE = 256 * 1024 default CONFIG_HAVE_FALLBACK_BOOT = 1 -default CONFIG_HAVE_MP_TABLE = 0 +default CONFIG_GENERATE_MP_TABLE = 0 default CONFIG_HAVE_HARD_RESET = 0 default CONFIG_UDELAY_TSC = 1 default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1 -default CONFIG_HAVE_PIRQ_TABLE = 1 +default CONFIG_GENERATE_PIRQ_TABLE = 1 default CONFIG_IRQ_SLOT_COUNT = 7 # Override this in targets/*/Config.lb. default CONFIG_MAINBOARD_VENDOR = "N/A" # Override this in targets/*/Config.lb. default CONFIG_MAINBOARD_PART_NUMBER = "N/A" # Override this in targets/*/Config.lb. diff --git a/src/mainboard/asus/p2b/Config.lb b/src/mainboard/asus/p2b/Config.lb index b91b3f87c6..86bb2a3a0c 100644 --- a/src/mainboard/asus/p2b/Config.lb +++ b/src/mainboard/asus/p2b/Config.lb @@ -25,7 +25,7 @@ default CONFIG_XIP_ROM_BASE = 0xffffffff - CONFIG_XIP_ROM_SIZE + 1 arch i386 end driver mainboard.o -if CONFIG_HAVE_PIRQ_TABLE +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end makerule ./failover.E diff --git a/src/mainboard/asus/p2b/Options.lb b/src/mainboard/asus/p2b/Options.lb index 5535514ff2..0d1bb91ca8 100644 --- a/src/mainboard/asus/p2b/Options.lb +++ b/src/mainboard/asus/p2b/Options.lb @@ -18,8 +18,8 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -46,7 +46,7 @@ uses CONFIG_ROMBASE uses CONFIG_RAMBASE uses CONFIG_XIP_ROM_SIZE uses CONFIG_XIP_ROM_BASE -uses CONFIG_HAVE_MP_TABLE +uses CONFIG_GENERATE_MP_TABLE uses CONFIG_CROSS_COMPILE uses CC uses HOSTCC @@ -66,11 +66,11 @@ uses CONFIG_PCI_ROM_RUN default CONFIG_ROM_SIZE = 256 * 1024 default CONFIG_HAVE_FALLBACK_BOOT = 1 -default CONFIG_HAVE_MP_TABLE = 0 +default CONFIG_GENERATE_MP_TABLE = 0 default CONFIG_HAVE_HARD_RESET = 0 default CONFIG_UDELAY_TSC = 1 default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1 -default CONFIG_HAVE_PIRQ_TABLE = 1 +default CONFIG_GENERATE_PIRQ_TABLE = 1 default CONFIG_IRQ_SLOT_COUNT = 6 # Override this in targets/*/Config.lb. default CONFIG_MAINBOARD_VENDOR = "N/A" # Override this in targets/*/Config.lb. default CONFIG_MAINBOARD_PART_NUMBER = "N/A" # Override this in targets/*/Config.lb. diff --git a/src/mainboard/asus/p3b-f/Config.lb b/src/mainboard/asus/p3b-f/Config.lb index 61d715bc44..dd95736389 100644 --- a/src/mainboard/asus/p3b-f/Config.lb +++ b/src/mainboard/asus/p3b-f/Config.lb @@ -25,7 +25,7 @@ default CONFIG_XIP_ROM_BASE = 0xffffffff - CONFIG_XIP_ROM_SIZE + 1 arch i386 end driver mainboard.o -if CONFIG_HAVE_PIRQ_TABLE +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end makerule ./failover.E diff --git a/src/mainboard/asus/p3b-f/Options.lb b/src/mainboard/asus/p3b-f/Options.lb index e7ac071833..1320c2612d 100644 --- a/src/mainboard/asus/p3b-f/Options.lb +++ b/src/mainboard/asus/p3b-f/Options.lb @@ -18,8 +18,8 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -45,7 +45,7 @@ uses CONFIG_ROMBASE uses CONFIG_RAMBASE uses CONFIG_XIP_ROM_SIZE uses CONFIG_XIP_ROM_BASE -uses CONFIG_HAVE_MP_TABLE +uses CONFIG_GENERATE_MP_TABLE uses CONFIG_CROSS_COMPILE uses CC uses HOSTCC @@ -65,11 +65,11 @@ uses CONFIG_PCI_ROM_RUN default CONFIG_ROM_SIZE = 256 * 1024 default CONFIG_HAVE_FALLBACK_BOOT = 1 -default CONFIG_HAVE_MP_TABLE = 0 +default CONFIG_GENERATE_MP_TABLE = 0 default CONFIG_HAVE_HARD_RESET = 0 default CONFIG_UDELAY_TSC = 1 default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1 -default CONFIG_HAVE_PIRQ_TABLE = 1 +default CONFIG_GENERATE_PIRQ_TABLE = 1 default CONFIG_IRQ_SLOT_COUNT = 8 # Override this in targets/*/Config.lb. default CONFIG_MAINBOARD_VENDOR = "N/A" # Override this in targets/*/Config.lb. default CONFIG_MAINBOARD_PART_NUMBER = "N/A" # Override this in targets/*/Config.lb. diff --git a/src/mainboard/axus/tc320/Config.lb b/src/mainboard/axus/tc320/Config.lb index 54aae5352e..5425def5fd 100644 --- a/src/mainboard/axus/tc320/Config.lb +++ b/src/mainboard/axus/tc320/Config.lb @@ -24,7 +24,7 @@ include /config/nofailovercalculation.lb arch i386 end driver mainboard.o -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end makerule ./failover.E depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc" action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@" diff --git a/src/mainboard/axus/tc320/Options.lb b/src/mainboard/axus/tc320/Options.lb index b5d873ea1a..b0fd16ebca 100644 --- a/src/mainboard/axus/tc320/Options.lb +++ b/src/mainboard/axus/tc320/Options.lb @@ -18,8 +18,8 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -75,11 +75,11 @@ default CONFIG_ROM_SIZE = 256 * 1024 default CONFIG_MAINBOARD_VENDOR = "AXUS" default CONFIG_MAINBOARD_PART_NUMBER = "TC320" default CONFIG_HAVE_FALLBACK_BOOT = 1 -default CONFIG_HAVE_MP_TABLE = 0 +default CONFIG_GENERATE_MP_TABLE = 0 default CONFIG_HAVE_HARD_RESET = 0 default CONFIG_UDELAY_TSC = 1 default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1 -default CONFIG_HAVE_PIRQ_TABLE = 1 +default CONFIG_GENERATE_PIRQ_TABLE = 1 default CONFIG_IRQ_SLOT_COUNT = 2 # Soldered NIC, internal USB, no real slots default CONFIG_PIRQ_ROUTE = 1 default CONFIG_HAVE_OPTION_TABLE = 0 diff --git a/src/mainboard/azza/pt-6ibd/Config.lb b/src/mainboard/azza/pt-6ibd/Config.lb index 2fa229966f..fc19d85866 100644 --- a/src/mainboard/azza/pt-6ibd/Config.lb +++ b/src/mainboard/azza/pt-6ibd/Config.lb @@ -24,7 +24,7 @@ include /config/nofailovercalculation.lb default CONFIG_XIP_ROM_BASE = 0xffffffff - CONFIG_XIP_ROM_SIZE + 1 arch i386 end driver mainboard.o -if CONFIG_HAVE_PIRQ_TABLE +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end makerule ./failover.E diff --git a/src/mainboard/azza/pt-6ibd/Options.lb b/src/mainboard/azza/pt-6ibd/Options.lb index 1f8e03beb4..68843932f1 100644 --- a/src/mainboard/azza/pt-6ibd/Options.lb +++ b/src/mainboard/azza/pt-6ibd/Options.lb @@ -18,8 +18,8 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -45,7 +45,7 @@ uses CONFIG_ROMBASE uses CONFIG_RAMBASE uses CONFIG_XIP_ROM_SIZE uses CONFIG_XIP_ROM_BASE -uses CONFIG_HAVE_MP_TABLE +uses CONFIG_GENERATE_MP_TABLE uses CONFIG_CROSS_COMPILE uses CC uses HOSTCC @@ -65,11 +65,11 @@ uses CONFIG_PCI_ROM_RUN default CONFIG_ROM_SIZE = 256 * 1024 default CONFIG_HAVE_FALLBACK_BOOT = 1 -default CONFIG_HAVE_MP_TABLE = 0 +default CONFIG_GENERATE_MP_TABLE = 0 default CONFIG_HAVE_HARD_RESET = 0 default CONFIG_UDELAY_TSC = 1 default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1 -default CONFIG_HAVE_PIRQ_TABLE = 1 +default CONFIG_GENERATE_PIRQ_TABLE = 1 default CONFIG_IRQ_SLOT_COUNT = 7 # Override this in targets/*/Config.lb. default CONFIG_MAINBOARD_VENDOR = "N/A" # Override this in targets/*/Config.lb. default CONFIG_MAINBOARD_PART_NUMBER = "N/A" # Override this in targets/*/Config.lb. diff --git a/src/mainboard/bcom/winnet100/Config.lb b/src/mainboard/bcom/winnet100/Config.lb index 7ea700dcfa..81f49c2fb1 100644 --- a/src/mainboard/bcom/winnet100/Config.lb +++ b/src/mainboard/bcom/winnet100/Config.lb @@ -24,7 +24,7 @@ include /config/nofailovercalculation.lb arch i386 end driver mainboard.o -if CONFIG_HAVE_PIRQ_TABLE +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end makerule ./failover.E diff --git a/src/mainboard/bcom/winnet100/Options.lb b/src/mainboard/bcom/winnet100/Options.lb index 614140e89e..d241356d54 100644 --- a/src/mainboard/bcom/winnet100/Options.lb +++ b/src/mainboard/bcom/winnet100/Options.lb @@ -18,8 +18,8 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -75,11 +75,11 @@ default CONFIG_ROM_SIZE = 256 * 1024 default CONFIG_MAINBOARD_VENDOR = "BCOM" default CONFIG_MAINBOARD_PART_NUMBER = "WinNET100" default CONFIG_HAVE_FALLBACK_BOOT = 1 -default CONFIG_HAVE_MP_TABLE = 0 +default CONFIG_GENERATE_MP_TABLE = 0 default CONFIG_HAVE_HARD_RESET = 0 default CONFIG_UDELAY_TSC = 1 default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1 -default CONFIG_HAVE_PIRQ_TABLE = 1 +default CONFIG_GENERATE_PIRQ_TABLE = 1 default CONFIG_IRQ_SLOT_COUNT = 2 # Soldered NIC, internal USB, no real slots default CONFIG_PIRQ_ROUTE = 1 default CONFIG_HAVE_OPTION_TABLE = 0 diff --git a/src/mainboard/bcom/winnetp680/Config.lb b/src/mainboard/bcom/winnetp680/Config.lb index 850f8e1326..89ab9929c4 100644 --- a/src/mainboard/bcom/winnetp680/Config.lb +++ b/src/mainboard/bcom/winnetp680/Config.lb @@ -25,9 +25,9 @@ include /config/nofailovercalculation.lb arch i386 end driver mainboard.o -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_ACPI_TABLES +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_ACPI_TABLES object fadt.o object dsdt.o object acpi_tables.o diff --git a/src/mainboard/bcom/winnetp680/Makefile.inc b/src/mainboard/bcom/winnetp680/Makefile.inc index eb24017e8e..61c662d784 100644 --- a/src/mainboard/bcom/winnetp680/Makefile.inc +++ b/src/mainboard/bcom/winnetp680/Makefile.inc @@ -21,12 +21,12 @@ initobj-y += crt0.o obj-y += mainboard.o -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o -obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += fadt.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += dsdt.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += acpi_tables.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += fadt.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += dsdt.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += acpi_tables.o ldscript-y += ../../../../src/arch/i386/init/ldscript_fallback_cbfs.lb ldscript-y += ../../../../src/cpu/x86/16bit/entry16.lds diff --git a/src/mainboard/bcom/winnetp680/Options.lb b/src/mainboard/bcom/winnetp680/Options.lb index 187fc52986..255fd643a3 100644 --- a/src/mainboard/bcom/winnetp680/Options.lb +++ b/src/mainboard/bcom/winnetp680/Options.lb @@ -19,8 +19,8 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -47,8 +47,8 @@ uses CONFIG_ROMBASE uses CONFIG_RAMBASE uses CONFIG_XIP_ROM_SIZE uses CONFIG_XIP_ROM_BASE -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_ACPI_TABLES +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_ACPI_TABLES uses CONFIG_HAVE_ACPI_RESUME uses CONFIG_CROSS_COMPILE uses CC @@ -72,13 +72,13 @@ default CONFIG_CONSOLE_SERIAL8250 = 1 default CONFIG_PCI_ROM_RUN = 0 default CONFIG_CONSOLE_VGA = 0 default CONFIG_HAVE_FALLBACK_BOOT = 1 -default CONFIG_HAVE_MP_TABLE = 0 +default CONFIG_GENERATE_MP_TABLE = 0 default CONFIG_UDELAY_TSC = 1 default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1 default CONFIG_HAVE_HARD_RESET = 0 -default CONFIG_HAVE_PIRQ_TABLE = 1 +default CONFIG_GENERATE_PIRQ_TABLE = 1 default CONFIG_IRQ_SLOT_COUNT = 10 -default CONFIG_HAVE_ACPI_TABLES = 0 +default CONFIG_GENERATE_ACPI_TABLES = 0 default CONFIG_HAVE_OPTION_TABLE = 1 default CONFIG_ROM_IMAGE_SIZE = 64 * 1024 default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE diff --git a/src/mainboard/biostar/m6tba/Config.lb b/src/mainboard/biostar/m6tba/Config.lb index 1ca8a5093d..420ecf0c98 100644 --- a/src/mainboard/biostar/m6tba/Config.lb +++ b/src/mainboard/biostar/m6tba/Config.lb @@ -25,7 +25,7 @@ default CONFIG_XIP_ROM_BASE = 0xffffffff - CONFIG_XIP_ROM_SIZE + 1 arch i386 end driver mainboard.o -if CONFIG_HAVE_PIRQ_TABLE +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end makerule ./failover.E diff --git a/src/mainboard/biostar/m6tba/Options.lb b/src/mainboard/biostar/m6tba/Options.lb index 1f8e03beb4..68843932f1 100644 --- a/src/mainboard/biostar/m6tba/Options.lb +++ b/src/mainboard/biostar/m6tba/Options.lb @@ -18,8 +18,8 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -45,7 +45,7 @@ uses CONFIG_ROMBASE uses CONFIG_RAMBASE uses CONFIG_XIP_ROM_SIZE uses CONFIG_XIP_ROM_BASE -uses CONFIG_HAVE_MP_TABLE +uses CONFIG_GENERATE_MP_TABLE uses CONFIG_CROSS_COMPILE uses CC uses HOSTCC @@ -65,11 +65,11 @@ uses CONFIG_PCI_ROM_RUN default CONFIG_ROM_SIZE = 256 * 1024 default CONFIG_HAVE_FALLBACK_BOOT = 1 -default CONFIG_HAVE_MP_TABLE = 0 +default CONFIG_GENERATE_MP_TABLE = 0 default CONFIG_HAVE_HARD_RESET = 0 default CONFIG_UDELAY_TSC = 1 default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1 -default CONFIG_HAVE_PIRQ_TABLE = 1 +default CONFIG_GENERATE_PIRQ_TABLE = 1 default CONFIG_IRQ_SLOT_COUNT = 7 # Override this in targets/*/Config.lb. default CONFIG_MAINBOARD_VENDOR = "N/A" # Override this in targets/*/Config.lb. default CONFIG_MAINBOARD_PART_NUMBER = "N/A" # Override this in targets/*/Config.lb. diff --git a/src/mainboard/broadcom/blast/Config.lb b/src/mainboard/broadcom/blast/Config.lb index e82bc9cf30..38375626e8 100644 --- a/src/mainboard/broadcom/blast/Config.lb +++ b/src/mainboard/broadcom/blast/Config.lb @@ -12,8 +12,8 @@ driver mainboard.o #dir /drivers/si/3114 -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object get_bus_conf.o object irq_tables.o end diff --git a/src/mainboard/broadcom/blast/Kconfig b/src/mainboard/broadcom/blast/Kconfig index 2cd56f1580..fb94ddc3ee 100644 --- a/src/mainboard/broadcom/blast/Kconfig +++ b/src/mainboard/broadcom/blast/Kconfig @@ -9,6 +9,7 @@ config BOARD_BROADCOM_BLAST select SOUTHBRIDGE_BROADCOM_BCM5785 select SUPERIO_NSC_PC87417 select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE select USE_PRINTK_IN_CAR select USE_DCACHE_RAM select HAVE_HARD_RESET diff --git a/src/mainboard/broadcom/blast/Makefile.inc b/src/mainboard/broadcom/blast/Makefile.inc index 09a594ee00..81e9def4eb 100644 --- a/src/mainboard/broadcom/blast/Makefile.inc +++ b/src/mainboard/broadcom/blast/Makefile.inc @@ -2,8 +2,8 @@ driver-y += mainboard.o # Needed by irq_tables and mptable and acpi_tables. obj-y += get_bus_conf.o -obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o driver-y += ../../../drivers/i2c/i2cmux2/i2cmux2.o diff --git a/src/mainboard/broadcom/blast/Options.lb b/src/mainboard/broadcom/blast/Options.lb index 76b369ecea..208a6c7433 100644 --- a/src/mainboard/broadcom/blast/Options.lb +++ b/src/mainboard/broadcom/blast/Options.lb @@ -1,6 +1,6 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE -uses CONFIG_HAVE_ACPI_TABLES +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE +uses CONFIG_GENERATE_ACPI_TABLES uses CONFIG_HAVE_ACPI_RESUME uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -93,14 +93,14 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=11 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ## Build code to export a CMOS option table diff --git a/src/mainboard/compaq/deskpro_en_sff_p600/Config.lb b/src/mainboard/compaq/deskpro_en_sff_p600/Config.lb index 40ce40b335..463598bb10 100644 --- a/src/mainboard/compaq/deskpro_en_sff_p600/Config.lb +++ b/src/mainboard/compaq/deskpro_en_sff_p600/Config.lb @@ -25,7 +25,7 @@ default CONFIG_XIP_ROM_BASE = 0xffffffff - CONFIG_XIP_ROM_SIZE + 1 arch i386 end driver mainboard.o -if CONFIG_HAVE_PIRQ_TABLE +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end makerule ./failover.E diff --git a/src/mainboard/compaq/deskpro_en_sff_p600/Options.lb b/src/mainboard/compaq/deskpro_en_sff_p600/Options.lb index 9e1c251135..dd8ab0256b 100644 --- a/src/mainboard/compaq/deskpro_en_sff_p600/Options.lb +++ b/src/mainboard/compaq/deskpro_en_sff_p600/Options.lb @@ -18,8 +18,8 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -45,7 +45,7 @@ uses CONFIG_ROMBASE uses CONFIG_RAMBASE uses CONFIG_XIP_ROM_SIZE uses CONFIG_XIP_ROM_BASE -uses CONFIG_HAVE_MP_TABLE +uses CONFIG_GENERATE_MP_TABLE uses CONFIG_CROSS_COMPILE uses CC uses HOSTCC @@ -65,11 +65,11 @@ uses CONFIG_PCI_ROM_RUN default CONFIG_ROM_SIZE = 256 * 1024 default CONFIG_HAVE_FALLBACK_BOOT = 1 -default CONFIG_HAVE_MP_TABLE = 0 +default CONFIG_GENERATE_MP_TABLE = 0 default CONFIG_HAVE_HARD_RESET = 0 default CONFIG_UDELAY_TSC = 1 default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1 -default CONFIG_HAVE_PIRQ_TABLE = 1 +default CONFIG_GENERATE_PIRQ_TABLE = 1 default CONFIG_IRQ_SLOT_COUNT = 5 # Override this in targets/*/Config.lb. default CONFIG_MAINBOARD_VENDOR = "N/A" # Override this in targets/*/Config.lb. default CONFIG_MAINBOARD_PART_NUMBER = "N/A" # Override this in targets/*/Config.lb. diff --git a/src/mainboard/dell/s1850/Config.lb b/src/mainboard/dell/s1850/Config.lb index 4eb4a026be..0f28b50b10 100644 --- a/src/mainboard/dell/s1850/Config.lb +++ b/src/mainboard/dell/s1850/Config.lb @@ -18,8 +18,8 @@ arch i386 end ## driver mainboard.o -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end object reset.o ## diff --git a/src/mainboard/dell/s1850/Kconfig b/src/mainboard/dell/s1850/Kconfig index 49c4ae86af..4466e44763 100644 --- a/src/mainboard/dell/s1850/Kconfig +++ b/src/mainboard/dell/s1850/Kconfig @@ -6,7 +6,8 @@ config BOARD_DELL_S1850 select SOUTHBRIDGE_INTEL_I82801ER select SOUTHBRIDGE_INTEL_PXHD select SUPERIO_NSC_PC8374 - select PIRQ_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE config MAINBOARD_DIR string diff --git a/src/mainboard/dell/s1850/Makefile.inc b/src/mainboard/dell/s1850/Makefile.inc index a3473c7e7e..ade0e18d4d 100644 --- a/src/mainboard/dell/s1850/Makefile.inc +++ b/src/mainboard/dell/s1850/Makefile.inc @@ -41,8 +41,8 @@ ldscript-y += ../../../../src/arch/i386/lib/failover.lds driver-y += mainboard.o -obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o ifdef POST_EVALUATION diff --git a/src/mainboard/dell/s1850/Options.lb b/src/mainboard/dell/s1850/Options.lb index 61ce744f6c..fb65f8d8e2 100644 --- a/src/mainboard/dell/s1850/Options.lb +++ b/src/mainboard/dell/s1850/Options.lb @@ -1,5 +1,5 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -80,14 +80,14 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=9 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ## Build code to export a CMOS option table diff --git a/src/mainboard/digitallogic/adl855pc/Config.lb b/src/mainboard/digitallogic/adl855pc/Config.lb index c6401dd299..8dd71330c9 100644 --- a/src/mainboard/digitallogic/adl855pc/Config.lb +++ b/src/mainboard/digitallogic/adl855pc/Config.lb @@ -13,7 +13,7 @@ arch i386 end ## driver mainboard.o -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end #object reset.o ## diff --git a/src/mainboard/digitallogic/adl855pc/Options.lb b/src/mainboard/digitallogic/adl855pc/Options.lb index 2ca09c8bf9..8d649bc0b1 100644 --- a/src/mainboard/digitallogic/adl855pc/Options.lb +++ b/src/mainboard/digitallogic/adl855pc/Options.lb @@ -1,5 +1,5 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -27,7 +27,7 @@ uses CONFIG_ROMBASE uses CONFIG_RAMBASE uses CONFIG_XIP_ROM_SIZE uses CONFIG_XIP_ROM_BASE -uses CONFIG_HAVE_MP_TABLE +uses CONFIG_GENERATE_MP_TABLE uses CONFIG_CROSS_COMPILE uses CC uses HOSTCC @@ -52,7 +52,7 @@ default CONFIG_HAVE_FALLBACK_BOOT=1 ## ## no MP table ## -default CONFIG_HAVE_MP_TABLE=0 +default CONFIG_GENERATE_MP_TABLE=0 ## ## Build code to reset the motherboard from coreboot @@ -67,7 +67,7 @@ default CONFIG_UDELAY_IO=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=5 #object irq_tables.o diff --git a/src/mainboard/digitallogic/msm586seg/Config.lb b/src/mainboard/digitallogic/msm586seg/Config.lb index 0a5ea954a6..178a7fc830 100644 --- a/src/mainboard/digitallogic/msm586seg/Config.lb +++ b/src/mainboard/digitallogic/msm586seg/Config.lb @@ -15,7 +15,7 @@ arch i386 end ## driver mainboard.o -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end # object reset.o ## diff --git a/src/mainboard/digitallogic/msm586seg/Options.lb b/src/mainboard/digitallogic/msm586seg/Options.lb index 27e5fd4b41..1bd5cae41a 100644 --- a/src/mainboard/digitallogic/msm586seg/Options.lb +++ b/src/mainboard/digitallogic/msm586seg/Options.lb @@ -1,5 +1,5 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -28,7 +28,7 @@ uses CONFIG_ROMBASE uses CONFIG_RAMBASE uses CONFIG_XIP_ROM_SIZE uses CONFIG_XIP_ROM_BASE -uses CONFIG_HAVE_MP_TABLE +uses CONFIG_GENERATE_MP_TABLE uses CONFIG_CROSS_COMPILE uses CC uses HOSTCC @@ -65,7 +65,7 @@ default CONFIG_HAVE_FALLBACK_BOOT=1 ## ## no MP table ## -default CONFIG_HAVE_MP_TABLE=0 +default CONFIG_GENERATE_MP_TABLE=0 ## ## Build code to reset the motherboard from coreboot @@ -75,7 +75,7 @@ default CONFIG_HAVE_HARD_RESET=0 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=2 #object irq_tables.o diff --git a/src/mainboard/digitallogic/msm800sev/Config.lb b/src/mainboard/digitallogic/msm800sev/Config.lb index f07835d7ce..7b7e2b5147 100644 --- a/src/mainboard/digitallogic/msm800sev/Config.lb +++ b/src/mainboard/digitallogic/msm800sev/Config.lb @@ -14,7 +14,7 @@ arch i386 end driver mainboard.o -if CONFIG_HAVE_PIRQ_TABLE +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end diff --git a/src/mainboard/digitallogic/msm800sev/Makefile.inc b/src/mainboard/digitallogic/msm800sev/Makefile.inc index eac4755d28..af947942fb 100644 --- a/src/mainboard/digitallogic/msm800sev/Makefile.inc +++ b/src/mainboard/digitallogic/msm800sev/Makefile.inc @@ -1,7 +1,7 @@ driver-y += mainboard.o # Needed by irq_tables and mptable and acpi_tables. -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o # This is part of the conversion to init-obj and away from included code. diff --git a/src/mainboard/digitallogic/msm800sev/Options.lb b/src/mainboard/digitallogic/msm800sev/Options.lb index 10e3bd0206..81c282238c 100644 --- a/src/mainboard/digitallogic/msm800sev/Options.lb +++ b/src/mainboard/digitallogic/msm800sev/Options.lb @@ -1,5 +1,5 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -27,7 +27,7 @@ uses CONFIG_ROMBASE uses CONFIG_RAMBASE uses CONFIG_XIP_ROM_SIZE uses CONFIG_XIP_ROM_BASE -uses CONFIG_HAVE_MP_TABLE +uses CONFIG_GENERATE_MP_TABLE uses CONFIG_CROSS_COMPILE uses CC uses HOSTCC @@ -67,7 +67,7 @@ default CONFIG_HAVE_FALLBACK_BOOT=1 ## ## no MP table ## -default CONFIG_HAVE_MP_TABLE=0 +default CONFIG_GENERATE_MP_TABLE=0 ## ## Build code to reset the motherboard from coreboot @@ -82,7 +82,7 @@ default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=9 default CONFIG_PIRQ_ROUTE=1 #object irq_tables.o diff --git a/src/mainboard/eaglelion/5bcm/Config.lb b/src/mainboard/eaglelion/5bcm/Config.lb index d1f02be8c5..3dfe6ab2dc 100644 --- a/src/mainboard/eaglelion/5bcm/Config.lb +++ b/src/mainboard/eaglelion/5bcm/Config.lb @@ -14,7 +14,7 @@ arch i386 end driver mainboard.o -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end #object reset.o ## diff --git a/src/mainboard/eaglelion/5bcm/Options.lb b/src/mainboard/eaglelion/5bcm/Options.lb index b60a9a7d6a..fb2bfae81e 100644 --- a/src/mainboard/eaglelion/5bcm/Options.lb +++ b/src/mainboard/eaglelion/5bcm/Options.lb @@ -1,5 +1,5 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -26,7 +26,7 @@ uses CONFIG_ROMBASE uses CONFIG_RAMBASE uses CONFIG_XIP_ROM_SIZE uses CONFIG_XIP_ROM_BASE -uses CONFIG_HAVE_MP_TABLE +uses CONFIG_GENERATE_MP_TABLE uses CONFIG_CROSS_COMPILE uses CC uses HOSTCC @@ -57,7 +57,7 @@ default CONFIG_HAVE_FALLBACK_BOOT=1 ## ## no MP table ## -default CONFIG_HAVE_MP_TABLE=0 +default CONFIG_GENERATE_MP_TABLE=0 ## ## Build code to reset the motherboard from coreboot @@ -72,7 +72,7 @@ default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=2 default CONFIG_PIRQ_ROUTE=1 #object irq_tables.o diff --git a/src/mainboard/emulation/qemu-x86/Config.lb b/src/mainboard/emulation/qemu-x86/Config.lb index 52d2e3e7de..d0f2005af7 100644 --- a/src/mainboard/emulation/qemu-x86/Config.lb +++ b/src/mainboard/emulation/qemu-x86/Config.lb @@ -34,7 +34,7 @@ arch i386 end ## driver mainboard.o -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end #object reset.o diff --git a/src/mainboard/emulation/qemu-x86/Kconfig b/src/mainboard/emulation/qemu-x86/Kconfig index fa7258b745..8054bc8432 100644 --- a/src/mainboard/emulation/qemu-x86/Kconfig +++ b/src/mainboard/emulation/qemu-x86/Kconfig @@ -4,6 +4,7 @@ config BOARD_EMULATION_QEMU_X86 select CPU_I586 select SOUTHBRIDGE_INTEL_I82371EB select CPU_EMULATION_QEMU_X86 + select HAVE_PIRQ_TABLE config MAINBOARD_DIR string diff --git a/src/mainboard/emulation/qemu-x86/Makefile.inc b/src/mainboard/emulation/qemu-x86/Makefile.inc index 1985b2e8b3..977cb4ad50 100644 --- a/src/mainboard/emulation/qemu-x86/Makefile.inc +++ b/src/mainboard/emulation/qemu-x86/Makefile.inc @@ -6,6 +6,7 @@ crt0-y += ../../../../src/arch/i386/lib/id.inc crt0-y += auto.inc obj-y += mainboard.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o ldscript-y += ../../../../src/arch/i386/init/ldscript_fallback_cbfs.lb ldscript-y += ../../../../src/cpu/x86/16bit/entry16.lds diff --git a/src/mainboard/emulation/qemu-x86/Options.lb b/src/mainboard/emulation/qemu-x86/Options.lb index e0e35ec84e..6cf0f76c97 100644 --- a/src/mainboard/emulation/qemu-x86/Options.lb +++ b/src/mainboard/emulation/qemu-x86/Options.lb @@ -1,5 +1,5 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -28,8 +28,8 @@ uses CONFIG_ROMBASE uses CONFIG_RAMBASE uses CONFIG_XIP_ROM_SIZE uses CONFIG_XIP_ROM_BASE -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_HIGH_TABLES +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_WRITE_HIGH_TABLES uses CONFIG_CROSS_COMPILE uses CC uses HOSTCC @@ -67,7 +67,7 @@ default CONFIG_HAVE_FALLBACK_BOOT=1 ## ## no MP table ## -default CONFIG_HAVE_MP_TABLE=0 +default CONFIG_GENERATE_MP_TABLE=0 ## ## Build code to reset the motherboard from coreboot @@ -77,10 +77,10 @@ default CONFIG_HAVE_HARD_RESET=0 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=6 -default CONFIG_HAVE_HIGH_TABLES=1 +default CONFIG_WRITE_HIGH_TABLES=1 ## ## Build code to export a CMOS option table diff --git a/src/mainboard/gigabyte/ga-6bxc/Config.lb b/src/mainboard/gigabyte/ga-6bxc/Config.lb index c6d1ab1fae..dcd4c79f7b 100644 --- a/src/mainboard/gigabyte/ga-6bxc/Config.lb +++ b/src/mainboard/gigabyte/ga-6bxc/Config.lb @@ -25,7 +25,7 @@ default CONFIG_XIP_ROM_BASE = 0xffffffff - CONFIG_XIP_ROM_SIZE + 1 arch i386 end driver mainboard.o -if CONFIG_HAVE_PIRQ_TABLE +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end makerule ./failover.E diff --git a/src/mainboard/gigabyte/ga-6bxc/Options.lb b/src/mainboard/gigabyte/ga-6bxc/Options.lb index 414611f7a9..8189979485 100644 --- a/src/mainboard/gigabyte/ga-6bxc/Options.lb +++ b/src/mainboard/gigabyte/ga-6bxc/Options.lb @@ -18,8 +18,8 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -45,7 +45,7 @@ uses CONFIG_ROMBASE uses CONFIG_RAMBASE uses CONFIG_XIP_ROM_SIZE uses CONFIG_XIP_ROM_BASE -uses CONFIG_HAVE_MP_TABLE +uses CONFIG_GENERATE_MP_TABLE uses CONFIG_CROSS_COMPILE uses CC uses HOSTCC @@ -65,11 +65,11 @@ uses CONFIG_PCI_ROM_RUN default CONFIG_ROM_SIZE = 256 * 1024 default CONFIG_HAVE_FALLBACK_BOOT = 1 -default CONFIG_HAVE_MP_TABLE = 0 +default CONFIG_GENERATE_MP_TABLE = 0 default CONFIG_HAVE_HARD_RESET = 0 default CONFIG_UDELAY_TSC = 1 default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1 -default CONFIG_HAVE_PIRQ_TABLE = 1 +default CONFIG_GENERATE_PIRQ_TABLE = 1 default CONFIG_IRQ_SLOT_COUNT = 6 # Override this in targets/*/Config.lb. default CONFIG_MAINBOARD_VENDOR = "N/A" # Override this in targets/*/Config.lb. default CONFIG_MAINBOARD_PART_NUMBER = "N/A" # Override this in targets/*/Config.lb. diff --git a/src/mainboard/gigabyte/ga_2761gxdk/Config.lb b/src/mainboard/gigabyte/ga_2761gxdk/Config.lb index 104ace034d..1cb39c685d 100644 --- a/src/mainboard/gigabyte/ga_2761gxdk/Config.lb +++ b/src/mainboard/gigabyte/ga_2761gxdk/Config.lb @@ -35,8 +35,8 @@ driver mainboard.o #needed by irq_tables and mptable and acpi_tables object get_bus_conf.o -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end #object reset.o if CONFIG_USE_INIT diff --git a/src/mainboard/gigabyte/ga_2761gxdk/Kconfig b/src/mainboard/gigabyte/ga_2761gxdk/Kconfig index a0f601bb0a..8726f685f9 100644 --- a/src/mainboard/gigabyte/ga_2761gxdk/Kconfig +++ b/src/mainboard/gigabyte/ga_2761gxdk/Kconfig @@ -7,11 +7,10 @@ config BOARD_GIGABYTE_GA_2761GXDK select NORTHBRIDGE_AMD_AMDK8_ROOT_COMPLEX select SOUTHBRIDGE_SIS_SIS966 select SUPERIO_ITE_IT8716F - select PIRQ_TABLE + select HAVE_PIRQ_TABLE select USE_PRINTK_IN_CAR select USE_DCACHE_RAM select HAVE_HARD_RESET - select HAVE_HIGH_TABLES select IOAPIC select MEM_TRAIN_SEQ select SB_HT_CHAIN_UNITID_OFFSET_ONLY diff --git a/src/mainboard/gigabyte/ga_2761gxdk/Makefile.inc b/src/mainboard/gigabyte/ga_2761gxdk/Makefile.inc index 8b29eba388..1130d0711b 100644 --- a/src/mainboard/gigabyte/ga_2761gxdk/Makefile.inc +++ b/src/mainboard/gigabyte/ga_2761gxdk/Makefile.inc @@ -23,8 +23,8 @@ driver-y += mainboard.o #needed by irq_tables and mptable and acpi_tables obj-y += get_bus_conf.o -obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o obj-$(CONFIG_USE_INIT) += cache_as_ram_auto.o obj-$(CONFIG_AP_CODE_IN_CAR) += apc_auto.o diff --git a/src/mainboard/gigabyte/ga_2761gxdk/Options.lb b/src/mainboard/gigabyte/ga_2761gxdk/Options.lb index aa533eebc4..2c18f9da2a 100644 --- a/src/mainboard/gigabyte/ga_2761gxdk/Options.lb +++ b/src/mainboard/gigabyte/ga_2761gxdk/Options.lb @@ -21,9 +21,9 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE -uses CONFIG_HAVE_ACPI_TABLES +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE +uses CONFIG_GENERATE_ACPI_TABLES uses CONFIG_HAVE_ACPI_RESUME uses CONFIG_ACPI_SSDTX_NUM uses CONFIG_USE_FALLBACK_IMAGE @@ -151,17 +151,17 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=11 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=0 +default CONFIG_GENERATE_MP_TABLE=0 ## ACPI tables will be included -default CONFIG_HAVE_ACPI_TABLES=0 +default CONFIG_GENERATE_ACPI_TABLES=0 ## ## Build code to export a CMOS option table diff --git a/src/mainboard/gigabyte/m57sli/Config.lb b/src/mainboard/gigabyte/m57sli/Config.lb index d3289427c0..6d5a13fb5c 100644 --- a/src/mainboard/gigabyte/m57sli/Config.lb +++ b/src/mainboard/gigabyte/m57sli/Config.lb @@ -33,8 +33,8 @@ driver mainboard.o #needed by irq_tables and mptable and acpi_tables object get_bus_conf.o -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end #object reset.o if CONFIG_USE_INIT @@ -166,7 +166,7 @@ end ## ## ACPI Support ## -if CONFIG_HAVE_ACPI_TABLES +if CONFIG_GENERATE_ACPI_TABLES object acpi_tables.o makerule dsdt.c depends "$(CONFIG_MAINBOARD)/dsdt.asl" diff --git a/src/mainboard/gigabyte/m57sli/Kconfig b/src/mainboard/gigabyte/m57sli/Kconfig index b67a792663..45359cb5e6 100644 --- a/src/mainboard/gigabyte/m57sli/Kconfig +++ b/src/mainboard/gigabyte/m57sli/Kconfig @@ -8,11 +8,11 @@ config BOARD_GIGABYTE_M57SLI select NORTHBRIDGE_AMD_AMDK8_ROOT_COMPLEX select SOUTHBRIDGE_NVIDIA_MCP55 select SUPERIO_ITE_IT8716F - select PIRQ_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE select USE_PRINTK_IN_CAR select USE_DCACHE_RAM select HAVE_HARD_RESET - select HAVE_HIGH_TABLES select IOAPIC select MEM_TRAIN_SEQ select SB_HT_CHAIN_UNITID_OFFSET_ONLY diff --git a/src/mainboard/gigabyte/m57sli/Makefile.inc b/src/mainboard/gigabyte/m57sli/Makefile.inc index 53f03d0278..62b7fd7a6e 100644 --- a/src/mainboard/gigabyte/m57sli/Makefile.inc +++ b/src/mainboard/gigabyte/m57sli/Makefile.inc @@ -23,12 +23,12 @@ driver-y += mainboard.o #needed by irq_tables and mptable and acpi_tables obj-y += get_bus_conf.o -obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o obj-$(CONFIG_USE_INIT) += cache_as_ram_auto.o obj-$(CONFIG_AP_CODE_IN_CAR) += apc_auto.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += dsdt.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += acpi_tables.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += dsdt.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += acpi_tables.o obj-$(CONFIG_HAVE_FANCTL) += fanctl.o # This is part of the conversion to init-obj and away from included code. diff --git a/src/mainboard/gigabyte/m57sli/Options.lb b/src/mainboard/gigabyte/m57sli/Options.lb index 0d42656a82..73b46894f5 100644 --- a/src/mainboard/gigabyte/m57sli/Options.lb +++ b/src/mainboard/gigabyte/m57sli/Options.lb @@ -19,9 +19,9 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE -uses CONFIG_HAVE_ACPI_TABLES +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE +uses CONFIG_GENERATE_ACPI_TABLES uses CONFIG_HAVE_ACPI_RESUME uses CONFIG_ACPI_SSDTX_NUM uses CONFIG_USE_FALLBACK_IMAGE @@ -84,7 +84,7 @@ uses CONFIG_HW_MEM_HOLE_SIZEK uses CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC uses CONFIG_K8_HT_FREQ_1G_SUPPORT -uses CONFIG_HAVE_HIGH_TABLES +uses CONFIG_WRITE_HIGH_TABLES uses CONFIG_HT_CHAIN_UNITID_BASE uses CONFIG_HT_CHAIN_END_UNITID_BASE @@ -157,20 +157,20 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=11 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## HIGH tables support -default CONFIG_HAVE_HIGH_TABLES=1 +default CONFIG_WRITE_HIGH_TABLES=1 ## ACPI tables will be included -default CONFIG_HAVE_ACPI_TABLES=1 +default CONFIG_GENERATE_ACPI_TABLES=1 ## ## Build code to export a CMOS option table diff --git a/src/mainboard/hp/dl145_g3/Config.lb b/src/mainboard/hp/dl145_g3/Config.lb index 12ea977bab..e0eb5d3ca8 100644 --- a/src/mainboard/hp/dl145_g3/Config.lb +++ b/src/mainboard/hp/dl145_g3/Config.lb @@ -40,8 +40,8 @@ driver mainboard.o #needed by irq_tables and mptable and acpi_tables object get_bus_conf.o -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end if CONFIG_USE_INIT makerule ./auto.o diff --git a/src/mainboard/hp/dl145_g3/Kconfig b/src/mainboard/hp/dl145_g3/Kconfig index 60cbcfe82a..512b443816 100644 --- a/src/mainboard/hp/dl145_g3/Kconfig +++ b/src/mainboard/hp/dl145_g3/Kconfig @@ -9,6 +9,7 @@ config BOARD_HP_DL145_G3 select SOUTHBRIDGE_BROADCOM_BCM5785 select SUPERIO_NSC_PC87417 select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE select USE_PRINTK_IN_CAR select USE_DCACHE_RAM select HAVE_HARD_RESET diff --git a/src/mainboard/hp/dl145_g3/Makefile.inc b/src/mainboard/hp/dl145_g3/Makefile.inc index e646f71f97..5942a752a3 100644 --- a/src/mainboard/hp/dl145_g3/Makefile.inc +++ b/src/mainboard/hp/dl145_g3/Makefile.inc @@ -2,8 +2,8 @@ driver-y += mainboard.o # Needed by irq_tables and mptable and acpi_tables. obj-y += get_bus_conf.o -obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o # This is part of the conversion to init-obj and away from included code. diff --git a/src/mainboard/hp/dl145_g3/Options.lb b/src/mainboard/hp/dl145_g3/Options.lb index 637cd0a0e5..2a598c35ea 100644 --- a/src/mainboard/hp/dl145_g3/Options.lb +++ b/src/mainboard/hp/dl145_g3/Options.lb @@ -24,9 +24,9 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE -uses CONFIG_HAVE_ACPI_TABLES +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE +uses CONFIG_GENERATE_ACPI_TABLES uses CONFIG_ACPI_SSDTX_NUM uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -136,14 +136,14 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=15 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## diff --git a/src/mainboard/ibm/e325/Config.lb b/src/mainboard/ibm/e325/Config.lb index 0c7cd33d89..dbf896a732 100644 --- a/src/mainboard/ibm/e325/Config.lb +++ b/src/mainboard/ibm/e325/Config.lb @@ -13,8 +13,8 @@ arch i386 end ## driver mainboard.o -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end #object reset.o if CONFIG_USE_INIT diff --git a/src/mainboard/ibm/e325/Kconfig b/src/mainboard/ibm/e325/Kconfig index d0e211f330..16e1570abb 100644 --- a/src/mainboard/ibm/e325/Kconfig +++ b/src/mainboard/ibm/e325/Kconfig @@ -9,6 +9,7 @@ config BOARD_IBM_E325 select SOUTHBRIDGE_AMD_AMD8131 select SUPERIO_NSC_PC87366 select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE select USE_PRINTK_IN_CAR select USE_DCACHE_RAM select HAVE_HARD_RESET diff --git a/src/mainboard/ibm/e325/Makefile.inc b/src/mainboard/ibm/e325/Makefile.inc index 0f9bd727b6..37671eafe7 100644 --- a/src/mainboard/ibm/e325/Makefile.inc +++ b/src/mainboard/ibm/e325/Makefile.inc @@ -22,8 +22,8 @@ driver-y += mainboard.o # Needed by irq_tables and mptable and acpi_tables. -obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o # This is part of the conversion to init-obj and away from included code. diff --git a/src/mainboard/ibm/e325/Options.lb b/src/mainboard/ibm/e325/Options.lb index 3c1aaff432..a745e187d1 100644 --- a/src/mainboard/ibm/e325/Options.lb +++ b/src/mainboard/ibm/e325/Options.lb @@ -1,5 +1,5 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -77,14 +77,14 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=12 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ## Build code to export a CMOS option table diff --git a/src/mainboard/ibm/e326/Config.lb b/src/mainboard/ibm/e326/Config.lb index 92a0c52145..0020fe3a3b 100644 --- a/src/mainboard/ibm/e326/Config.lb +++ b/src/mainboard/ibm/e326/Config.lb @@ -13,8 +13,8 @@ arch i386 end ## driver mainboard.o -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end #object reset.o if CONFIG_USE_INIT diff --git a/src/mainboard/ibm/e326/Kconfig b/src/mainboard/ibm/e326/Kconfig index 5d3496c44d..1a9e2891ff 100644 --- a/src/mainboard/ibm/e326/Kconfig +++ b/src/mainboard/ibm/e326/Kconfig @@ -9,6 +9,7 @@ config BOARD_IBM_E326 select SOUTHBRIDGE_AMD_AMD8131 select SUPERIO_NSC_PC87366 select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE select USE_PRINTK_IN_CAR select USE_DCACHE_RAM select HAVE_HARD_RESET diff --git a/src/mainboard/ibm/e326/Makefile.inc b/src/mainboard/ibm/e326/Makefile.inc index 0f9bd727b6..37671eafe7 100644 --- a/src/mainboard/ibm/e326/Makefile.inc +++ b/src/mainboard/ibm/e326/Makefile.inc @@ -22,8 +22,8 @@ driver-y += mainboard.o # Needed by irq_tables and mptable and acpi_tables. -obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o # This is part of the conversion to init-obj and away from included code. diff --git a/src/mainboard/ibm/e326/Options.lb b/src/mainboard/ibm/e326/Options.lb index 3ad4f38a41..265ae756da 100644 --- a/src/mainboard/ibm/e326/Options.lb +++ b/src/mainboard/ibm/e326/Options.lb @@ -1,5 +1,5 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -79,14 +79,14 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=12 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ## Build code to export a CMOS option table diff --git a/src/mainboard/iei/juki-511p/Config.lb b/src/mainboard/iei/juki-511p/Config.lb index 46c039bb35..a27f2ae183 100644 --- a/src/mainboard/iei/juki-511p/Config.lb +++ b/src/mainboard/iei/juki-511p/Config.lb @@ -31,7 +31,7 @@ arch i386 end driver mainboard.o -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end #object reset.o ## diff --git a/src/mainboard/iei/juki-511p/Kconfig b/src/mainboard/iei/juki-511p/Kconfig index 3852aa3e29..6d34a78a42 100644 --- a/src/mainboard/iei/juki-511p/Kconfig +++ b/src/mainboard/iei/juki-511p/Kconfig @@ -25,7 +25,6 @@ config BOARD_IEI_JUKI_511P select NORTHBRIDGE_AMD_GX1 select SOUTHBRIDGE_AMD_CS5530 select SUPERIO_WINBOND_W83977F - select HAVE_PIRQ_TABLE select PIRQ_ROUTE select HAVE_OPTION_TABLE select UDELAY_TSC diff --git a/src/mainboard/iei/juki-511p/Options.lb b/src/mainboard/iei/juki-511p/Options.lb index 16264f2754..d7fde57fd0 100644 --- a/src/mainboard/iei/juki-511p/Options.lb +++ b/src/mainboard/iei/juki-511p/Options.lb @@ -1,5 +1,5 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -29,7 +29,7 @@ uses CONFIG_ROMBASE uses CONFIG_RAMBASE uses CONFIG_XIP_ROM_SIZE uses CONFIG_XIP_ROM_BASE -uses CONFIG_HAVE_MP_TABLE +uses CONFIG_GENERATE_MP_TABLE uses CONFIG_CROSS_COMPILE uses CC uses HOSTCC @@ -58,7 +58,7 @@ default CONFIG_HAVE_FALLBACK_BOOT=1 ## ## no MP table ## -default CONFIG_HAVE_MP_TABLE=0 +default CONFIG_GENERATE_MP_TABLE=0 ## ## Build code to reset the motherboard from coreboot @@ -69,8 +69,8 @@ default CONFIG_UDELAY_IO=1 ## ## Build code to export a programmable irq routing table ## -# FIXME: There's an irq_tables.c file, but CONFIG_HAVE_PIRQ_TABLE is 0. -default CONFIG_HAVE_PIRQ_TABLE=0 +# FIXME: There's an irq_tables.c file, but CONFIG_GENERATE_PIRQ_TABLE is 0. +default CONFIG_GENERATE_PIRQ_TABLE=0 default CONFIG_IRQ_SLOT_COUNT=2 default CONFIG_PIRQ_ROUTE=1 diff --git a/src/mainboard/iei/nova4899r/Config.lb b/src/mainboard/iei/nova4899r/Config.lb index 321de6cbfa..fa21551919 100644 --- a/src/mainboard/iei/nova4899r/Config.lb +++ b/src/mainboard/iei/nova4899r/Config.lb @@ -15,7 +15,7 @@ arch i386 end driver mainboard.o -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end #object reset.o ## diff --git a/src/mainboard/iei/nova4899r/Options.lb b/src/mainboard/iei/nova4899r/Options.lb index 8ecef9c3f1..564a441836 100644 --- a/src/mainboard/iei/nova4899r/Options.lb +++ b/src/mainboard/iei/nova4899r/Options.lb @@ -1,5 +1,5 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -24,7 +24,7 @@ uses CONFIG_ROMBASE uses CONFIG_RAMBASE uses CONFIG_XIP_ROM_SIZE uses CONFIG_XIP_ROM_BASE -uses CONFIG_HAVE_MP_TABLE +uses CONFIG_GENERATE_MP_TABLE uses CONFIG_CROSS_COMPILE uses CC uses HOSTCC @@ -64,7 +64,7 @@ default CONFIG_HAVE_FALLBACK_BOOT=0 ## ## no MP table ## -default CONFIG_HAVE_MP_TABLE=0 +default CONFIG_GENERATE_MP_TABLE=0 ## ## Build code to reset the motherboard from coreboot @@ -79,7 +79,7 @@ default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=5 default CONFIG_PIRQ_ROUTE=1 #object irq_tables.o diff --git a/src/mainboard/iei/pcisa-lx-800-r10/Config.lb b/src/mainboard/iei/pcisa-lx-800-r10/Config.lb index e4ebbcb170..35da03a0d7 100644 --- a/src/mainboard/iei/pcisa-lx-800-r10/Config.lb +++ b/src/mainboard/iei/pcisa-lx-800-r10/Config.lb @@ -24,7 +24,7 @@ include /config/nofailovercalculation.lb arch i386 end driver mainboard.o -if CONFIG_HAVE_PIRQ_TABLE +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end # Compile cache_as_ram.c to auto.inc. diff --git a/src/mainboard/iei/pcisa-lx-800-r10/Makefile.inc b/src/mainboard/iei/pcisa-lx-800-r10/Makefile.inc index eac4755d28..af947942fb 100644 --- a/src/mainboard/iei/pcisa-lx-800-r10/Makefile.inc +++ b/src/mainboard/iei/pcisa-lx-800-r10/Makefile.inc @@ -1,7 +1,7 @@ driver-y += mainboard.o # Needed by irq_tables and mptable and acpi_tables. -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o # This is part of the conversion to init-obj and away from included code. diff --git a/src/mainboard/iei/pcisa-lx-800-r10/Options.lb b/src/mainboard/iei/pcisa-lx-800-r10/Options.lb index 4e3581b662..b3a6195c32 100644 --- a/src/mainboard/iei/pcisa-lx-800-r10/Options.lb +++ b/src/mainboard/iei/pcisa-lx-800-r10/Options.lb @@ -18,8 +18,8 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -48,7 +48,7 @@ uses CONFIG_ROMBASE uses CONFIG_RAMBASE uses CONFIG_XIP_ROM_SIZE uses CONFIG_XIP_ROM_BASE -uses CONFIG_HAVE_MP_TABLE +uses CONFIG_GENERATE_MP_TABLE uses CONFIG_CROSS_COMPILE uses CC uses HOSTCC @@ -74,10 +74,10 @@ default CONFIG_CONSOLE_VGA = 0 default CONFIG_VIDEO_MB = 8 default CONFIG_PCI_ROM_RUN = 0 default CONFIG_HAVE_FALLBACK_BOOT = 1 -default CONFIG_HAVE_MP_TABLE = 0 +default CONFIG_GENERATE_MP_TABLE = 0 default CONFIG_HAVE_HARD_RESET = 0 default CONFIG_UDELAY_IO = 1 -default CONFIG_HAVE_PIRQ_TABLE = 1 +default CONFIG_GENERATE_PIRQ_TABLE = 1 default CONFIG_IRQ_SLOT_COUNT = 9 default CONFIG_PIRQ_ROUTE = 1 default CONFIG_HAVE_OPTION_TABLE = 0 diff --git a/src/mainboard/intel/eagleheights/Config.lb b/src/mainboard/intel/eagleheights/Config.lb index a4e1ff3a20..9dac1fc76b 100644 --- a/src/mainboard/intel/eagleheights/Config.lb +++ b/src/mainboard/intel/eagleheights/Config.lb @@ -43,10 +43,10 @@ arch i386 end ## driver mainboard.o -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end -if CONFIG_HAVE_ACPI_TABLES +if CONFIG_GENERATE_ACPI_TABLES object fadt.o object acpi_tables.o makerule dsdt.c diff --git a/src/mainboard/intel/eagleheights/Kconfig b/src/mainboard/intel/eagleheights/Kconfig index c0ae121ca1..1255db7525 100644 --- a/src/mainboard/intel/eagleheights/Kconfig +++ b/src/mainboard/intel/eagleheights/Kconfig @@ -7,6 +7,7 @@ config BOARD_INTEL_EAGLEHEIGHTS select SUPERIO_INTEL_I3100 select SUPERIO_SMSC_SMSCSUPERIO select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE select MMCONF_SUPPORT select USE_PRINTK_IN_CAR select UDELAY_TSC diff --git a/src/mainboard/intel/eagleheights/Makefile.inc b/src/mainboard/intel/eagleheights/Makefile.inc index 110ee97c89..3421755c12 100644 --- a/src/mainboard/intel/eagleheights/Makefile.inc +++ b/src/mainboard/intel/eagleheights/Makefile.inc @@ -1,9 +1,9 @@ driver-y += mainboard.o -obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += fadt.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += acpi_tables.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += dsdt.o +obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += fadt.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += acpi_tables.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += dsdt.o obj-y += reset.o # This is part of the conversion to init-obj and away from included code. diff --git a/src/mainboard/intel/eagleheights/Options.lb b/src/mainboard/intel/eagleheights/Options.lb index 2b0441e9ff..3a2e7b68c6 100644 --- a/src/mainboard/intel/eagleheights/Options.lb +++ b/src/mainboard/intel/eagleheights/Options.lb @@ -20,15 +20,15 @@ ## # Tables -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_IRQ_SLOT_COUNT uses CONFIG_HAVE_OPTION_TABLE uses CONFIG_USE_OPTION_TABLE uses CONFIG_LB_CKS_RANGE_START uses CONFIG_LB_CKS_RANGE_END uses CONFIG_LB_CKS_LOC -uses CONFIG_HAVE_ACPI_TABLES +uses CONFIG_GENERATE_ACPI_TABLES uses CONFIG_HAVE_MAINBOARD_RESOURCES # SMP uses CONFIG_SMP @@ -153,19 +153,19 @@ default CONFIG_MMCONF_BASE_ADDRESS=0xE0000000 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=9 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ## Build code to provide ACPI support ## -default CONFIG_HAVE_ACPI_TABLES=1 +default CONFIG_GENERATE_ACPI_TABLES=1 default CONFIG_HAVE_MAINBOARD_RESOURCES=1 ## diff --git a/src/mainboard/intel/jarrell/Config.lb b/src/mainboard/intel/jarrell/Config.lb index 4fbd3fb22c..768c90b843 100644 --- a/src/mainboard/intel/jarrell/Config.lb +++ b/src/mainboard/intel/jarrell/Config.lb @@ -18,8 +18,8 @@ arch i386 end ## driver mainboard.o -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end object reset.o ## diff --git a/src/mainboard/intel/jarrell/Kconfig b/src/mainboard/intel/jarrell/Kconfig index 4ad4140bd8..7af03d12c1 100644 --- a/src/mainboard/intel/jarrell/Kconfig +++ b/src/mainboard/intel/jarrell/Kconfig @@ -7,6 +7,7 @@ config BOARD_INTEL_JARRELL select SOUTHBRIDGE_INTEL_I82801ER select SUPERIO_NSC_PC87427 select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE select UDELAY_TSC select ATI_RAGE_XL diff --git a/src/mainboard/intel/jarrell/Options.lb b/src/mainboard/intel/jarrell/Options.lb index 56096a32da..91927eee0d 100644 --- a/src/mainboard/intel/jarrell/Options.lb +++ b/src/mainboard/intel/jarrell/Options.lb @@ -1,5 +1,5 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -93,14 +93,14 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=18 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ## Build code to export a CMOS option table diff --git a/src/mainboard/intel/mtarvon/Config.lb b/src/mainboard/intel/mtarvon/Config.lb index e5e598214d..aa8391eb27 100644 --- a/src/mainboard/intel/mtarvon/Config.lb +++ b/src/mainboard/intel/mtarvon/Config.lb @@ -32,8 +32,8 @@ arch i386 end ## driver mainboard.o -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end ## ## Romcc output diff --git a/src/mainboard/intel/mtarvon/Kconfig b/src/mainboard/intel/mtarvon/Kconfig index 49efb3e298..9ee1559c87 100644 --- a/src/mainboard/intel/mtarvon/Kconfig +++ b/src/mainboard/intel/mtarvon/Kconfig @@ -6,6 +6,7 @@ config BOARD_INTEL_MTARVON select SOUTHBRIDGE_INTEL_I3100 select SUPERIO_INTEL_I3100 select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE select UDELAY_TSC config MAINBOARD_DIR diff --git a/src/mainboard/intel/mtarvon/Options.lb b/src/mainboard/intel/mtarvon/Options.lb index b30d963761..7d99620274 100644 --- a/src/mainboard/intel/mtarvon/Options.lb +++ b/src/mainboard/intel/mtarvon/Options.lb @@ -17,8 +17,8 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -95,14 +95,14 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=1 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ## Build code for SMP support diff --git a/src/mainboard/intel/truxton/Config.lb b/src/mainboard/intel/truxton/Config.lb index a297da1133..9a29d61c74 100644 --- a/src/mainboard/intel/truxton/Config.lb +++ b/src/mainboard/intel/truxton/Config.lb @@ -32,8 +32,8 @@ arch i386 end ## driver mainboard.o -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end ## ## Romcc output diff --git a/src/mainboard/intel/truxton/Kconfig b/src/mainboard/intel/truxton/Kconfig index 4aa96c4912..e21cff5157 100644 --- a/src/mainboard/intel/truxton/Kconfig +++ b/src/mainboard/intel/truxton/Kconfig @@ -7,6 +7,7 @@ config BOARD_INTEL_TRUXTON select SUPERIO_INTEL_I3100 select SUPERIO_SMSC_SMSCSUPERIO select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE select UDELAY_TSC config MAINBOARD_DIR diff --git a/src/mainboard/intel/truxton/Options.lb b/src/mainboard/intel/truxton/Options.lb index ea2f1e8f17..3815885005 100644 --- a/src/mainboard/intel/truxton/Options.lb +++ b/src/mainboard/intel/truxton/Options.lb @@ -17,8 +17,8 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -97,14 +97,14 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=1 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ## Build code for SMP support diff --git a/src/mainboard/intel/xe7501devkit/Config.lb b/src/mainboard/intel/xe7501devkit/Config.lb index 98a1414e46..b6404a7146 100644 --- a/src/mainboard/intel/xe7501devkit/Config.lb +++ b/src/mainboard/intel/xe7501devkit/Config.lb @@ -9,9 +9,9 @@ arch i386 end ## driver mainboard.o -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end -if CONFIG_HAVE_ACPI_TABLES object acpi_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_ACPI_TABLES object acpi_tables.o end object reset.o ## diff --git a/src/mainboard/intel/xe7501devkit/Kconfig b/src/mainboard/intel/xe7501devkit/Kconfig index f2b4c1ff0b..36166a3314 100644 --- a/src/mainboard/intel/xe7501devkit/Kconfig +++ b/src/mainboard/intel/xe7501devkit/Kconfig @@ -7,6 +7,7 @@ config BOARD_INTEL_XE7501DEVKIT select SOUTHBRIDGE_INTEL_I82801CA select SUPERIO_SMSC_LPC47B272 select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE select UDELAY_TSC select HAVE_OPTION_TABLE select HAVE_ACPI_TABLES diff --git a/src/mainboard/intel/xe7501devkit/Makefile.inc b/src/mainboard/intel/xe7501devkit/Makefile.inc index a40cb5a5ae..cd66339206 100644 --- a/src/mainboard/intel/xe7501devkit/Makefile.inc +++ b/src/mainboard/intel/xe7501devkit/Makefile.inc @@ -1,4 +1,4 @@ ROMCCFLAGS := -mcpu=p4 -O2 -obj-$(CONFIG_HAVE_ACPI_TABLES) += acpi_tables.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += acpi_tables.o include $(src)/mainboard/Makefile.romccboard.inc diff --git a/src/mainboard/intel/xe7501devkit/Options.lb b/src/mainboard/intel/xe7501devkit/Options.lb index 19ac7fedeb..0de6572398 100644 --- a/src/mainboard/intel/xe7501devkit/Options.lb +++ b/src/mainboard/intel/xe7501devkit/Options.lb @@ -1,7 +1,7 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_ACPI_TABLES +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_ACPI_TABLES uses CONFIG_HAVE_ACPI_RESUME -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_OPTION_TABLE uses CONFIG_IRQ_SLOT_COUNT @@ -85,17 +85,17 @@ default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=12 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## Build code to export ACPI tables? -default CONFIG_HAVE_ACPI_TABLES=1 +default CONFIG_GENERATE_ACPI_TABLES=1 ## ## Build code to export a CMOS option table? diff --git a/src/mainboard/iwill/dk8_htx/Config.lb b/src/mainboard/iwill/dk8_htx/Config.lb index 54a66c7939..b6ea0e291d 100644 --- a/src/mainboard/iwill/dk8_htx/Config.lb +++ b/src/mainboard/iwill/dk8_htx/Config.lb @@ -15,15 +15,15 @@ driver mainboard.o #needed by irq_tables and mptable and acpi_tables object get_bus_conf.o -if CONFIG_HAVE_MP_TABLE +if CONFIG_GENERATE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end -#if CONFIG_HAVE_ACPI_TABLES +#if CONFIG_GENERATE_ACPI_TABLES # object acpi_tables.o # object fadt.o # if CONFIG_SB_HT_CHAIN_ON_BUS0 @@ -41,7 +41,7 @@ end # end #end -if CONFIG_HAVE_ACPI_TABLES +if CONFIG_GENERATE_ACPI_TABLES object acpi_tables.o object fadt.o makerule dsdt.c diff --git a/src/mainboard/iwill/dk8_htx/Kconfig b/src/mainboard/iwill/dk8_htx/Kconfig index ace16502be..bfdd91b622 100644 --- a/src/mainboard/iwill/dk8_htx/Kconfig +++ b/src/mainboard/iwill/dk8_htx/Kconfig @@ -9,6 +9,7 @@ config BOARD_IWILL_DK8_HTX select SOUTHBRIDGE_AMD_AMD8131 select SUPERIO_WINBOND_W83627HF select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE select USE_PRINTK_IN_CAR select USE_DCACHE_RAM select HAVE_HARD_RESET diff --git a/src/mainboard/iwill/dk8_htx/Makefile.inc b/src/mainboard/iwill/dk8_htx/Makefile.inc index 6135e90b5a..c2a3adeaef 100644 --- a/src/mainboard/iwill/dk8_htx/Makefile.inc +++ b/src/mainboard/iwill/dk8_htx/Makefile.inc @@ -23,11 +23,11 @@ driver-y += mainboard.o # Needed by irq_tables and mptable and acpi_tables. obj-y += get_bus_conf.o -obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += dsdt.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += acpi_tables.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += fadt.o +obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += dsdt.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += acpi_tables.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += fadt.o # ./ssdt.o is in northbridge/amd/amdk8/Config.lb obj-$(CONFIG_ACPI_SSDTX_NUM) += ssdt2.o diff --git a/src/mainboard/iwill/dk8_htx/Options.lb b/src/mainboard/iwill/dk8_htx/Options.lb index 55fd1f0166..1e5484a81a 100644 --- a/src/mainboard/iwill/dk8_htx/Options.lb +++ b/src/mainboard/iwill/dk8_htx/Options.lb @@ -1,6 +1,6 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE -uses CONFIG_HAVE_ACPI_TABLES +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE +uses CONFIG_GENERATE_ACPI_TABLES uses CONFIG_HAVE_ACPI_RESUME uses CONFIG_ACPI_SSDTX_NUM uses CONFIG_USE_FALLBACK_IMAGE @@ -125,17 +125,17 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=11 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ACPI tables will be included -default CONFIG_HAVE_ACPI_TABLES=1 +default CONFIG_GENERATE_ACPI_TABLES=1 ## extra SSDT num default CONFIG_ACPI_SSDTX_NUM=3 diff --git a/src/mainboard/iwill/dk8s2/Config.lb b/src/mainboard/iwill/dk8s2/Config.lb index 8f34a30aa3..19fc42afa9 100644 --- a/src/mainboard/iwill/dk8s2/Config.lb +++ b/src/mainboard/iwill/dk8s2/Config.lb @@ -13,8 +13,8 @@ arch i386 end ## driver mainboard.o -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end #object reset.o ## ATI Rage XL framebuffering graphics driver diff --git a/src/mainboard/iwill/dk8s2/Kconfig b/src/mainboard/iwill/dk8s2/Kconfig index 32d2a2783a..4899127c8e 100644 --- a/src/mainboard/iwill/dk8s2/Kconfig +++ b/src/mainboard/iwill/dk8s2/Kconfig @@ -9,6 +9,7 @@ config BOARD_IWILL_DK8S2 select SOUTHBRIDGE_AMD_AMD8131 select SUPERIO_WINBOND_W83627HF select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE select USE_PRINTK_IN_CAR select USE_DCACHE_RAM select HAVE_HARD_RESET diff --git a/src/mainboard/iwill/dk8s2/Makefile.inc b/src/mainboard/iwill/dk8s2/Makefile.inc index 0f9bd727b6..37671eafe7 100644 --- a/src/mainboard/iwill/dk8s2/Makefile.inc +++ b/src/mainboard/iwill/dk8s2/Makefile.inc @@ -22,8 +22,8 @@ driver-y += mainboard.o # Needed by irq_tables and mptable and acpi_tables. -obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o # This is part of the conversion to init-obj and away from included code. diff --git a/src/mainboard/iwill/dk8s2/Options.lb b/src/mainboard/iwill/dk8s2/Options.lb index 208aeee735..911a54bc2c 100644 --- a/src/mainboard/iwill/dk8s2/Options.lb +++ b/src/mainboard/iwill/dk8s2/Options.lb @@ -1,5 +1,5 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -78,14 +78,14 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=12 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ## Build code to export a CMOS option table diff --git a/src/mainboard/iwill/dk8x/Config.lb b/src/mainboard/iwill/dk8x/Config.lb index 7e2dd6dbf5..1bd1cf198d 100644 --- a/src/mainboard/iwill/dk8x/Config.lb +++ b/src/mainboard/iwill/dk8x/Config.lb @@ -13,8 +13,8 @@ arch i386 end ## driver mainboard.o -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end #object reset.o if CONFIG_USE_INIT diff --git a/src/mainboard/iwill/dk8x/Kconfig b/src/mainboard/iwill/dk8x/Kconfig index a18152dc7b..ef07b166ba 100644 --- a/src/mainboard/iwill/dk8x/Kconfig +++ b/src/mainboard/iwill/dk8x/Kconfig @@ -9,6 +9,7 @@ config BOARD_IWILL_DK8X select SOUTHBRIDGE_AMD_AMD8131 select SUPERIO_WINBOND_W83627THF select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE select USE_PRINTK_IN_CAR select USE_DCACHE_RAM select HAVE_HARD_RESET diff --git a/src/mainboard/iwill/dk8x/Makefile.inc b/src/mainboard/iwill/dk8x/Makefile.inc index 86d71e152b..c382cc681d 100644 --- a/src/mainboard/iwill/dk8x/Makefile.inc +++ b/src/mainboard/iwill/dk8x/Makefile.inc @@ -21,8 +21,8 @@ driver-y += mainboard.o -obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o # This is part of the conversion to init-obj and away from included code. diff --git a/src/mainboard/iwill/dk8x/Options.lb b/src/mainboard/iwill/dk8x/Options.lb index a9e396d6ff..5cc8161ab1 100644 --- a/src/mainboard/iwill/dk8x/Options.lb +++ b/src/mainboard/iwill/dk8x/Options.lb @@ -1,5 +1,5 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -78,14 +78,14 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=9 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ## Build code to export a CMOS option table diff --git a/src/mainboard/jetway/j7f24/Config.lb b/src/mainboard/jetway/j7f24/Config.lb index bd33c3ffc1..1758d5d674 100644 --- a/src/mainboard/jetway/j7f24/Config.lb +++ b/src/mainboard/jetway/j7f24/Config.lb @@ -25,9 +25,9 @@ include /config/nofailovercalculation.lb arch i386 end driver mainboard.o -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_ACPI_TABLES +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_ACPI_TABLES object fadt.o object dsdt.o object acpi_tables.o diff --git a/src/mainboard/jetway/j7f24/Makefile.inc b/src/mainboard/jetway/j7f24/Makefile.inc index 2a637c8b0b..c21d6575fe 100644 --- a/src/mainboard/jetway/j7f24/Makefile.inc +++ b/src/mainboard/jetway/j7f24/Makefile.inc @@ -21,8 +21,8 @@ initobj-y += crt0.o obj-y += mainboard.o -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o -obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o ldscript-y += ../../../../src/arch/i386/init/ldscript_fallback_cbfs.lb ldscript-y += ../../../../src/cpu/x86/16bit/entry16.lds diff --git a/src/mainboard/jetway/j7f24/Options.lb b/src/mainboard/jetway/j7f24/Options.lb index 2f17f018c4..b53a62f6d4 100644 --- a/src/mainboard/jetway/j7f24/Options.lb +++ b/src/mainboard/jetway/j7f24/Options.lb @@ -19,8 +19,8 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -47,8 +47,8 @@ uses CONFIG_ROMBASE uses CONFIG_RAMBASE uses CONFIG_XIP_ROM_SIZE uses CONFIG_XIP_ROM_BASE -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_ACPI_TABLES +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_ACPI_TABLES uses CONFIG_HAVE_ACPI_RESUME uses CONFIG_CROSS_COMPILE uses CC @@ -73,13 +73,13 @@ default CONFIG_CONSOLE_SERIAL8250 = 1 default CONFIG_PCI_ROM_RUN = 0 default CONFIG_CONSOLE_VGA = 0 default CONFIG_HAVE_FALLBACK_BOOT = 1 -default CONFIG_HAVE_MP_TABLE = 0 +default CONFIG_GENERATE_MP_TABLE = 0 default CONFIG_UDELAY_TSC = 1 default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1 default CONFIG_HAVE_HARD_RESET = 0 -default CONFIG_HAVE_PIRQ_TABLE = 1 +default CONFIG_GENERATE_PIRQ_TABLE = 1 default CONFIG_IRQ_SLOT_COUNT = 10 -default CONFIG_HAVE_ACPI_TABLES = 0 +default CONFIG_GENERATE_ACPI_TABLES = 0 default CONFIG_HAVE_OPTION_TABLE = 0 default CONFIG_ROM_IMAGE_SIZE = 64 * 1024 default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE diff --git a/src/mainboard/kontron/986lcd-m/Config.lb b/src/mainboard/kontron/986lcd-m/Config.lb index 6b73f04ab7..4f9607685a 100644 --- a/src/mainboard/kontron/986lcd-m/Config.lb +++ b/src/mainboard/kontron/986lcd-m/Config.lb @@ -46,11 +46,11 @@ arch i386 end driver mainboard.o driver rtl8168.o -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end if CONFIG_HAVE_SMI_HANDLER smmobject mainboard_smi.o end -if CONFIG_HAVE_ACPI_TABLES +if CONFIG_GENERATE_ACPI_TABLES object fadt.o object acpi_tables.o makerule dsdt.c diff --git a/src/mainboard/kontron/986lcd-m/Kconfig b/src/mainboard/kontron/986lcd-m/Kconfig index 14442fb953..28d54dda7a 100644 --- a/src/mainboard/kontron/986lcd-m/Kconfig +++ b/src/mainboard/kontron/986lcd-m/Kconfig @@ -7,6 +7,7 @@ config BOARD_KONTRON_986LCD_M select SOUTHBRIDGE_INTEL_I82801GX select SUPERIO_WINBOND_W83627THG select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE select MMCONF_SUPPORT select USE_PRINTK_IN_CAR select AP_IN_SIPI_WAIT diff --git a/src/mainboard/kontron/986lcd-m/Makefile.inc b/src/mainboard/kontron/986lcd-m/Makefile.inc index bd3495ab77..b719b5836d 100644 --- a/src/mainboard/kontron/986lcd-m/Makefile.inc +++ b/src/mainboard/kontron/986lcd-m/Makefile.inc @@ -27,11 +27,11 @@ driver-y += mainboard.o driver-y += rtl8168.o #obj-y += ../../../southbridge/intel/i82801gx/i82801gx_reset.c -obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += dsdt.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += acpi_tables.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += fadt.o +obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += dsdt.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += acpi_tables.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += fadt.o smmobj-$(CONFIG_HAVE_SMI_HANDLER) += mainboard_smi.o diff --git a/src/mainboard/kontron/986lcd-m/Options.lb b/src/mainboard/kontron/986lcd-m/Options.lb index 2f42d5d404..feb26a666a 100644 --- a/src/mainboard/kontron/986lcd-m/Options.lb +++ b/src/mainboard/kontron/986lcd-m/Options.lb @@ -20,15 +20,15 @@ ## # Tables -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_IRQ_SLOT_COUNT uses CONFIG_HAVE_OPTION_TABLE uses CONFIG_USE_OPTION_TABLE uses CONFIG_LB_CKS_RANGE_START uses CONFIG_LB_CKS_RANGE_END uses CONFIG_LB_CKS_LOC -uses CONFIG_HAVE_ACPI_TABLES +uses CONFIG_GENERATE_ACPI_TABLES uses CONFIG_HAVE_ACPI_RESUME uses CONFIG_HAVE_MAINBOARD_RESOURCES # SMP @@ -156,19 +156,19 @@ default CONFIG_GFXUMA=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=18 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ## Build code to provide ACPI support ## -default CONFIG_HAVE_ACPI_TABLES=1 +default CONFIG_GENERATE_ACPI_TABLES=1 default CONFIG_HAVE_MAINBOARD_RESOURCES=1 default CONFIG_HAVE_ACPI_RESUME=1 diff --git a/src/mainboard/kontron/986lcd-m/acpi_tables.c b/src/mainboard/kontron/986lcd-m/acpi_tables.c index 0f5e704b1e..27942e3499 100644 --- a/src/mainboard/kontron/986lcd-m/acpi_tables.c +++ b/src/mainboard/kontron/986lcd-m/acpi_tables.c @@ -355,7 +355,7 @@ unsigned long write_acpi_tables(unsigned long start) printk_debug("ACPI: * DMI (Linux workaround)\n"); memcpy((void *)0xfff80, dmi_table, DMI_TABLE_SIZE); -#if CONFIG_HAVE_HIGH_TABLES == 1 +#if CONFIG_WRITE_HIGH_TABLES == 1 memcpy((void *)current, dmi_table, DMI_TABLE_SIZE); current += DMI_TABLE_SIZE; ALIGN_CURRENT; diff --git a/src/mainboard/kontron/kt690/Config.lb b/src/mainboard/kontron/kt690/Config.lb index 0f7577288e..1fb667deb9 100644 --- a/src/mainboard/kontron/kt690/Config.lb +++ b/src/mainboard/kontron/kt690/Config.lb @@ -33,13 +33,13 @@ driver mainboard.o #dir /drivers/si/3114 -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object get_bus_conf.o object irq_tables.o end -if CONFIG_HAVE_ACPI_TABLES +if CONFIG_GENERATE_ACPI_TABLES object acpi_tables.o object fadt.o makerule dsdt.c diff --git a/src/mainboard/kontron/kt690/Makefile.inc b/src/mainboard/kontron/kt690/Makefile.inc index 0a2460d166..317f9ca1c5 100644 --- a/src/mainboard/kontron/kt690/Makefile.inc +++ b/src/mainboard/kontron/kt690/Makefile.inc @@ -23,11 +23,11 @@ driver-y += mainboard.o # Needed by irq_tables and mptable and acpi_tables. obj-y += get_bus_conf.o -obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += dsdt.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += acpi_tables.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += fadt.o +obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += dsdt.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += acpi_tables.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += fadt.o # This is part of the conversion to init-obj and away from included code. diff --git a/src/mainboard/kontron/kt690/Options.lb b/src/mainboard/kontron/kt690/Options.lb index 1ca2dfb906..6e3ad131eb 100644 --- a/src/mainboard/kontron/kt690/Options.lb +++ b/src/mainboard/kontron/kt690/Options.lb @@ -20,9 +20,9 @@ ## ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE -uses CONFIG_HAVE_ACPI_TABLES +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE +uses CONFIG_GENERATE_ACPI_TABLES uses CONFIG_HAVE_ACPI_RESUME uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -121,17 +121,17 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=11 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ACPI tables will be included -default CONFIG_HAVE_ACPI_TABLES=1 +default CONFIG_GENERATE_ACPI_TABLES=1 ## ## Build code to export a CMOS option table diff --git a/src/mainboard/kontron/kt690/mptable.c b/src/mainboard/kontron/kt690/mptable.c index f629e55962..06926bdad4 100644 --- a/src/mainboard/kontron/kt690/mptable.c +++ b/src/mainboard/kontron/kt690/mptable.c @@ -142,7 +142,7 @@ void *smp_write_config_table(void *v) /* PCI interrupts are level triggered, and are * associated with a specific bus/device/function tuple. */ -#if CONFIG_HAVE_ACPI_TABLES == 0 +#if CONFIG_GENERATE_ACPI_TABLES == 0 #define PCI_INT(bus, dev, fn, pin) \ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), apicid_sb600, (pin)) #else diff --git a/src/mainboard/lippert/frontrunner/Config.lb b/src/mainboard/lippert/frontrunner/Config.lb index daf513380f..f5513a3f11 100644 --- a/src/mainboard/lippert/frontrunner/Config.lb +++ b/src/mainboard/lippert/frontrunner/Config.lb @@ -14,7 +14,7 @@ arch i386 end driver mainboard.o -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end #object reset.o ## diff --git a/src/mainboard/lippert/frontrunner/Options.lb b/src/mainboard/lippert/frontrunner/Options.lb index a6549dcd75..e6a9b48cad 100644 --- a/src/mainboard/lippert/frontrunner/Options.lb +++ b/src/mainboard/lippert/frontrunner/Options.lb @@ -1,5 +1,5 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -26,7 +26,7 @@ uses CONFIG_ROMBASE uses CONFIG_RAMBASE uses CONFIG_XIP_ROM_SIZE uses CONFIG_XIP_ROM_BASE -uses CONFIG_HAVE_MP_TABLE +uses CONFIG_GENERATE_MP_TABLE uses CONFIG_CROSS_COMPILE uses CC uses HOSTCC @@ -55,7 +55,7 @@ default CONFIG_HAVE_FALLBACK_BOOT=1 ## ## no MP table ## -default CONFIG_HAVE_MP_TABLE=0 +default CONFIG_GENERATE_MP_TABLE=0 ## ## Build code to reset the motherboard from coreboot @@ -70,7 +70,7 @@ default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=2 #object irq_tables.o diff --git a/src/mainboard/lippert/roadrunner-lx/Config.lb b/src/mainboard/lippert/roadrunner-lx/Config.lb index 00b6713896..8e52fa57c5 100644 --- a/src/mainboard/lippert/roadrunner-lx/Config.lb +++ b/src/mainboard/lippert/roadrunner-lx/Config.lb @@ -36,7 +36,7 @@ arch i386 end driver mainboard.o -if CONFIG_HAVE_PIRQ_TABLE +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end diff --git a/src/mainboard/lippert/roadrunner-lx/Makefile.inc b/src/mainboard/lippert/roadrunner-lx/Makefile.inc index eac4755d28..af947942fb 100644 --- a/src/mainboard/lippert/roadrunner-lx/Makefile.inc +++ b/src/mainboard/lippert/roadrunner-lx/Makefile.inc @@ -1,7 +1,7 @@ driver-y += mainboard.o # Needed by irq_tables and mptable and acpi_tables. -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o # This is part of the conversion to init-obj and away from included code. diff --git a/src/mainboard/lippert/roadrunner-lx/Options.lb b/src/mainboard/lippert/roadrunner-lx/Options.lb index 486f23979c..b9ca9db796 100644 --- a/src/mainboard/lippert/roadrunner-lx/Options.lb +++ b/src/mainboard/lippert/roadrunner-lx/Options.lb @@ -20,8 +20,8 @@ ## Based on Options.lb from AMD's DB800 mainboard. -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -50,7 +50,7 @@ uses CONFIG_ROMBASE uses CONFIG_RAMBASE uses CONFIG_XIP_ROM_SIZE uses CONFIG_XIP_ROM_BASE -uses CONFIG_HAVE_MP_TABLE +uses CONFIG_GENERATE_MP_TABLE uses CONFIG_CROSS_COMPILE uses CC uses HOSTCC @@ -91,7 +91,7 @@ default CONFIG_HAVE_FALLBACK_BOOT = 1 ## ## no MP table ## -default CONFIG_HAVE_MP_TABLE = 0 +default CONFIG_GENERATE_MP_TABLE = 0 ## ## Build code to reset the motherboard from coreboot @@ -106,7 +106,7 @@ default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE = 1 +default CONFIG_GENERATE_PIRQ_TABLE = 1 default CONFIG_IRQ_SLOT_COUNT = 7 default CONFIG_PIRQ_ROUTE = 1 diff --git a/src/mainboard/lippert/spacerunner-lx/Config.lb b/src/mainboard/lippert/spacerunner-lx/Config.lb index b74ce8b911..7b4d9b4311 100644 --- a/src/mainboard/lippert/spacerunner-lx/Config.lb +++ b/src/mainboard/lippert/spacerunner-lx/Config.lb @@ -35,7 +35,7 @@ arch i386 end driver mainboard.o -if CONFIG_HAVE_PIRQ_TABLE +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end diff --git a/src/mainboard/lippert/spacerunner-lx/Makefile.inc b/src/mainboard/lippert/spacerunner-lx/Makefile.inc index eac4755d28..af947942fb 100644 --- a/src/mainboard/lippert/spacerunner-lx/Makefile.inc +++ b/src/mainboard/lippert/spacerunner-lx/Makefile.inc @@ -1,7 +1,7 @@ driver-y += mainboard.o # Needed by irq_tables and mptable and acpi_tables. -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o # This is part of the conversion to init-obj and away from included code. diff --git a/src/mainboard/lippert/spacerunner-lx/Options.lb b/src/mainboard/lippert/spacerunner-lx/Options.lb index f0048739b6..5bb104bf9a 100644 --- a/src/mainboard/lippert/spacerunner-lx/Options.lb +++ b/src/mainboard/lippert/spacerunner-lx/Options.lb @@ -20,8 +20,8 @@ ## Based on Options.lb from AMD's DB800 mainboard. -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -50,7 +50,7 @@ uses CONFIG_ROMBASE uses CONFIG_RAMBASE uses CONFIG_XIP_ROM_SIZE uses CONFIG_XIP_ROM_BASE -uses CONFIG_HAVE_MP_TABLE +uses CONFIG_GENERATE_MP_TABLE uses CONFIG_CROSS_COMPILE uses CC uses HOSTCC @@ -91,7 +91,7 @@ default CONFIG_HAVE_FALLBACK_BOOT = 1 ## ## no MP table ## -default CONFIG_HAVE_MP_TABLE = 0 +default CONFIG_GENERATE_MP_TABLE = 0 ## ## Build code to reset the motherboard from coreboot @@ -106,7 +106,7 @@ default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE = 1 +default CONFIG_GENERATE_PIRQ_TABLE = 1 default CONFIG_IRQ_SLOT_COUNT = 7 default CONFIG_PIRQ_ROUTE = 1 diff --git a/src/mainboard/mitac/6513wu/Config.lb b/src/mainboard/mitac/6513wu/Config.lb index 5c9a63fe1f..0d22324174 100644 --- a/src/mainboard/mitac/6513wu/Config.lb +++ b/src/mainboard/mitac/6513wu/Config.lb @@ -24,7 +24,7 @@ include /config/nofailovercalculation.lb arch i386 end driver mainboard.o -if CONFIG_HAVE_PIRQ_TABLE +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end makerule ./failover.E diff --git a/src/mainboard/mitac/6513wu/Options.lb b/src/mainboard/mitac/6513wu/Options.lb index ed08ab49d2..0dac44bb03 100644 --- a/src/mainboard/mitac/6513wu/Options.lb +++ b/src/mainboard/mitac/6513wu/Options.lb @@ -27,9 +27,9 @@ uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL uses CONFIG_FALLBACK_SIZE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET -uses CONFIG_HAVE_MP_TABLE +uses CONFIG_GENERATE_MP_TABLE uses CONFIG_HAVE_OPTION_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_HEAP_SIZE uses CONFIG_IRQ_SLOT_COUNT uses CONFIG_MAINBOARD @@ -64,8 +64,8 @@ uses HOSTCC default CONFIG_MAINBOARD_VENDOR = "Mitac" default CONFIG_MAINBOARD_PART_NUMBER = "6513WU" default CONFIG_IRQ_SLOT_COUNT = 8 -default CONFIG_HAVE_PIRQ_TABLE = 1 -default CONFIG_HAVE_MP_TABLE = 0 +default CONFIG_GENERATE_PIRQ_TABLE = 1 +default CONFIG_GENERATE_MP_TABLE = 0 default CONFIG_HAVE_OPTION_TABLE = 0 default CONFIG_USE_OPTION_TABLE = 0 diff --git a/src/mainboard/msi/ms6119/Config.lb b/src/mainboard/msi/ms6119/Config.lb index 3836ca8bba..2a5fb79126 100644 --- a/src/mainboard/msi/ms6119/Config.lb +++ b/src/mainboard/msi/ms6119/Config.lb @@ -25,7 +25,7 @@ default CONFIG_XIP_ROM_BASE = 0xffffffff - CONFIG_XIP_ROM_SIZE + 1 arch i386 end driver mainboard.o -if CONFIG_HAVE_PIRQ_TABLE +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end makerule ./failover.E diff --git a/src/mainboard/msi/ms6119/Options.lb b/src/mainboard/msi/ms6119/Options.lb index 98b3a8cc15..7930819f12 100644 --- a/src/mainboard/msi/ms6119/Options.lb +++ b/src/mainboard/msi/ms6119/Options.lb @@ -18,8 +18,8 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -45,7 +45,7 @@ uses CONFIG_ROMBASE uses CONFIG_RAMBASE uses CONFIG_XIP_ROM_SIZE uses CONFIG_XIP_ROM_BASE -uses CONFIG_HAVE_MP_TABLE +uses CONFIG_GENERATE_MP_TABLE uses CONFIG_CROSS_COMPILE uses CC uses HOSTCC @@ -65,11 +65,11 @@ uses CONFIG_PCI_ROM_RUN default CONFIG_ROM_SIZE = 256 * 1024 default CONFIG_HAVE_FALLBACK_BOOT = 1 -default CONFIG_HAVE_MP_TABLE = 0 +default CONFIG_GENERATE_MP_TABLE = 0 default CONFIG_HAVE_HARD_RESET = 0 default CONFIG_UDELAY_TSC = 1 default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1 -default CONFIG_HAVE_PIRQ_TABLE = 1 +default CONFIG_GENERATE_PIRQ_TABLE = 1 default CONFIG_IRQ_SLOT_COUNT = 7 # Override this in targets/*/Config.lb. default CONFIG_MAINBOARD_VENDOR = "N/A" # Override this in targets/*/Config.lb. default CONFIG_MAINBOARD_PART_NUMBER = "N/A" # Override this in targets/*/Config.lb. diff --git a/src/mainboard/msi/ms6147/Config.lb b/src/mainboard/msi/ms6147/Config.lb index 31b5bf2b62..c63f59aceb 100644 --- a/src/mainboard/msi/ms6147/Config.lb +++ b/src/mainboard/msi/ms6147/Config.lb @@ -26,7 +26,7 @@ default CONFIG_XIP_ROM_BASE = 0xffffffff - CONFIG_XIP_ROM_SIZE + 1 arch i386 end driver mainboard.o -if CONFIG_HAVE_PIRQ_TABLE +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end diff --git a/src/mainboard/msi/ms6147/Options.lb b/src/mainboard/msi/ms6147/Options.lb index 318017d45e..e6ccb87bd8 100644 --- a/src/mainboard/msi/ms6147/Options.lb +++ b/src/mainboard/msi/ms6147/Options.lb @@ -18,8 +18,8 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -45,7 +45,7 @@ uses CONFIG_ROMBASE uses CONFIG_RAMBASE uses CONFIG_XIP_ROM_SIZE uses CONFIG_XIP_ROM_BASE -uses CONFIG_HAVE_MP_TABLE +uses CONFIG_GENERATE_MP_TABLE uses CONFIG_CROSS_COMPILE uses CC uses HOSTCC @@ -65,11 +65,11 @@ uses CONFIG_PCI_ROM_RUN default CONFIG_ROM_SIZE = 256 * 1024 default CONFIG_HAVE_FALLBACK_BOOT = 1 -default CONFIG_HAVE_MP_TABLE = 0 +default CONFIG_GENERATE_MP_TABLE = 0 default CONFIG_HAVE_HARD_RESET = 0 default CONFIG_UDELAY_TSC = 1 default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1 -default CONFIG_HAVE_PIRQ_TABLE = 1 +default CONFIG_GENERATE_PIRQ_TABLE = 1 default CONFIG_IRQ_SLOT_COUNT = 8 # Override this in targets/*/Config.lb. default CONFIG_MAINBOARD_VENDOR = "N/A" # Override this in targets/*/Config.lb. default CONFIG_MAINBOARD_PART_NUMBER = "N/A" # Override this in targets/*/Config.lb. diff --git a/src/mainboard/msi/ms6156/Config.lb b/src/mainboard/msi/ms6156/Config.lb index 3f0862f773..cbb02e409c 100644 --- a/src/mainboard/msi/ms6156/Config.lb +++ b/src/mainboard/msi/ms6156/Config.lb @@ -25,7 +25,7 @@ default CONFIG_XIP_ROM_BASE = 0xffffffff - CONFIG_XIP_ROM_SIZE + 1 arch i386 end driver mainboard.o -if CONFIG_HAVE_PIRQ_TABLE +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end makerule ./failover.E diff --git a/src/mainboard/msi/ms6156/Options.lb b/src/mainboard/msi/ms6156/Options.lb index fa5d142443..8d6de68a61 100644 --- a/src/mainboard/msi/ms6156/Options.lb +++ b/src/mainboard/msi/ms6156/Options.lb @@ -18,8 +18,8 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -45,7 +45,7 @@ uses CONFIG_ROMBASE uses CONFIG_RAMBASE uses CONFIG_XIP_ROM_SIZE uses CONFIG_XIP_ROM_BASE -uses CONFIG_HAVE_MP_TABLE +uses CONFIG_GENERATE_MP_TABLE uses CONFIG_CROSS_COMPILE uses CC uses HOSTCC @@ -65,11 +65,11 @@ uses CONFIG_PCI_ROM_RUN default CONFIG_ROM_SIZE = 256 * 1024 default CONFIG_HAVE_FALLBACK_BOOT = 1 -default CONFIG_HAVE_MP_TABLE = 0 +default CONFIG_GENERATE_MP_TABLE = 0 default CONFIG_HAVE_HARD_RESET = 0 default CONFIG_UDELAY_TSC = 1 default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1 -default CONFIG_HAVE_PIRQ_TABLE = 1 +default CONFIG_GENERATE_PIRQ_TABLE = 1 default CONFIG_IRQ_SLOT_COUNT = 7 default CONFIG_MAINBOARD_VENDOR = "MSI" default CONFIG_MAINBOARD_PART_NUMBER = "MS-6156" diff --git a/src/mainboard/msi/ms6178/Config.lb b/src/mainboard/msi/ms6178/Config.lb index 8ca226dd47..755144dfa6 100644 --- a/src/mainboard/msi/ms6178/Config.lb +++ b/src/mainboard/msi/ms6178/Config.lb @@ -24,7 +24,7 @@ include /config/nofailovercalculation.lb arch i386 end driver mainboard.o -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end # object reset.o makerule ./failover.E depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc" diff --git a/src/mainboard/msi/ms6178/Options.lb b/src/mainboard/msi/ms6178/Options.lb index 11259499fa..04660f0c55 100644 --- a/src/mainboard/msi/ms6178/Options.lb +++ b/src/mainboard/msi/ms6178/Options.lb @@ -18,8 +18,8 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -46,7 +46,7 @@ uses CONFIG_ROMBASE uses CONFIG_RAMBASE uses CONFIG_XIP_ROM_SIZE uses CONFIG_XIP_ROM_BASE -uses CONFIG_HAVE_MP_TABLE +uses CONFIG_GENERATE_MP_TABLE uses CONFIG_CROSS_COMPILE uses CC uses HOSTCC @@ -61,14 +61,14 @@ uses CONFIG_UDELAY_TSC uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN -uses CONFIG_HAVE_HIGH_TABLES +uses CONFIG_WRITE_HIGH_TABLES uses CONFIG_VIDEO_MB default CONFIG_ROM_SIZE = 512 * 1024 default CONFIG_HAVE_FALLBACK_BOOT = 1 -default CONFIG_HAVE_MP_TABLE = 0 +default CONFIG_GENERATE_MP_TABLE = 0 default CONFIG_HAVE_HARD_RESET = 0 -default CONFIG_HAVE_PIRQ_TABLE = 1 +default CONFIG_GENERATE_PIRQ_TABLE = 1 default CONFIG_IRQ_SLOT_COUNT = 4 # Override this in targets/*/Config.lb. default CONFIG_MAINBOARD_VENDOR = "N/A" # Override this in targets/*/Config.lb. default CONFIG_MAINBOARD_PART_NUMBER = "N/A" # Override this in targets/*/Config.lb. @@ -94,6 +94,6 @@ default CONFIG_UDELAY_TSC = 1 default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1 default CONFIG_CONSOLE_VGA = 1 default CONFIG_PCI_ROM_RUN = 1 -default CONFIG_HAVE_HIGH_TABLES = 1 +default CONFIG_WRITE_HIGH_TABLES = 1 default CONFIG_VIDEO_MB = 1 end diff --git a/src/mainboard/msi/ms7135/Config.lb b/src/mainboard/msi/ms7135/Config.lb index 5bd867b888..ce8565cd87 100644 --- a/src/mainboard/msi/ms7135/Config.lb +++ b/src/mainboard/msi/ms7135/Config.lb @@ -39,11 +39,11 @@ driver mainboard.o # Needed by irq_tables and mptable and acpi_tables. object get_bus_conf.o -if CONFIG_HAVE_MP_TABLE +if CONFIG_GENERATE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end diff --git a/src/mainboard/msi/ms7135/Kconfig b/src/mainboard/msi/ms7135/Kconfig index fef2cf0aac..da72601b00 100644 --- a/src/mainboard/msi/ms7135/Kconfig +++ b/src/mainboard/msi/ms7135/Kconfig @@ -7,7 +7,8 @@ config BOARD_MSI_MS7135 select NORTHBRIDGE_AMD_AMDK8_ROOT_COMPLEX select SOUTHBRIDGE_NVIDIA_CK804 select SUPERIO_WINBOND_W83627THF - select PIRQ_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE select USE_DCACHE_RAM select USE_PRINTK_IN_CAR select SERIAL_CPU_INIT diff --git a/src/mainboard/msi/ms7135/Options.lb b/src/mainboard/msi/ms7135/Options.lb index 4a3809d4ab..2d09cd026b 100644 --- a/src/mainboard/msi/ms7135/Options.lb +++ b/src/mainboard/msi/ms7135/Options.lb @@ -20,8 +20,8 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_USE_FAILOVER_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -132,14 +132,14 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=13 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ## Build code to export a CMOS option table diff --git a/src/mainboard/msi/ms7260/Config.lb b/src/mainboard/msi/ms7260/Config.lb index d17e0973f2..24e803934c 100644 --- a/src/mainboard/msi/ms7260/Config.lb +++ b/src/mainboard/msi/ms7260/Config.lb @@ -26,8 +26,8 @@ arch i386 end driver mainboard.o object get_bus_conf.o # Needed by irq_tables and mptable (and acpi_tables). -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end # object reset.o if CONFIG_USE_INIT diff --git a/src/mainboard/msi/ms7260/Kconfig b/src/mainboard/msi/ms7260/Kconfig index 9ccce1ffdf..6890108c4e 100644 --- a/src/mainboard/msi/ms7260/Kconfig +++ b/src/mainboard/msi/ms7260/Kconfig @@ -7,11 +7,11 @@ config BOARD_MSI_MS7260 select NORTHBRIDGE_AMD_AMDK8_ROOT_COMPLEX select SOUTHBRIDGE_NVIDIA_MCP55 select SUPERIO_WINBOND_W83627EHG - select PIRQ_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE select USE_PRINTK_IN_CAR select USE_DCACHE_RAM select HAVE_HARD_RESET - select HAVE_HIGH_TABLES select IOAPIC select MEM_TRAIN_SEQ select SB_HT_CHAIN_UNITID_OFFSET_ONLY diff --git a/src/mainboard/msi/ms7260/Makefile.inc b/src/mainboard/msi/ms7260/Makefile.inc index dcc633156c..f10f36c128 100644 --- a/src/mainboard/msi/ms7260/Makefile.inc +++ b/src/mainboard/msi/ms7260/Makefile.inc @@ -23,8 +23,8 @@ driver-y += mainboard.o #needed by irq_tables and mptable and acpi_tables obj-y += get_bus_conf.o -obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o obj-$(CONFIG_USE_INIT) += cache_as_ram_auto.o obj-$(CONFIG_AP_CODE_IN_CAR) += apc_auto.o diff --git a/src/mainboard/msi/ms7260/Options.lb b/src/mainboard/msi/ms7260/Options.lb index 5affc40c28..8e52def02a 100644 --- a/src/mainboard/msi/ms7260/Options.lb +++ b/src/mainboard/msi/ms7260/Options.lb @@ -18,8 +18,8 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_USE_FAILOVER_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -104,9 +104,9 @@ default CONFIG_LB_MEM_TOPK = 2048 # 1MB more for pgtbl. default CONFIG_HAVE_FALLBACK_BOOT = 1 default CONFIG_HAVE_FAILOVER_BOOT = 1 default CONFIG_HAVE_HARD_RESET = 1 -default CONFIG_HAVE_PIRQ_TABLE = 1 +default CONFIG_GENERATE_PIRQ_TABLE = 1 default CONFIG_IRQ_SLOT_COUNT = 11 # TODO: Check if correct. -default CONFIG_HAVE_MP_TABLE = 1 # TODO: Check if correct. +default CONFIG_GENERATE_MP_TABLE = 1 # TODO: Check if correct. default CONFIG_HAVE_OPTION_TABLE = 1 default CONFIG_SMP = 1 default CONFIG_MAX_CPUS = 2 diff --git a/src/mainboard/msi/ms9185/Config.lb b/src/mainboard/msi/ms9185/Config.lb index 99b86007af..c02f260fe9 100644 --- a/src/mainboard/msi/ms9185/Config.lb +++ b/src/mainboard/msi/ms9185/Config.lb @@ -39,11 +39,11 @@ driver mainboard.o #needed by irq_tables and mptable and acpi_tables object get_bus_conf.o -if CONFIG_HAVE_MP_TABLE +if CONFIG_GENERATE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end diff --git a/src/mainboard/msi/ms9185/Kconfig b/src/mainboard/msi/ms9185/Kconfig index c2dcd9d1e9..6dc605d1ac 100644 --- a/src/mainboard/msi/ms9185/Kconfig +++ b/src/mainboard/msi/ms9185/Kconfig @@ -9,9 +9,11 @@ config BOARD_MSI_MS9185 select SOUTHBRIDGE_BROADCOM_BCM5785 select SUPERIO_NSC_PC87417 select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE select USE_PRINTK_IN_CAR select USE_DCACHE_RAM select HAVE_HARD_RESET + select HAVE_ACPI_TABLES select IOAPIC config MAINBOARD_DIR diff --git a/src/mainboard/msi/ms9185/Makefile.inc b/src/mainboard/msi/ms9185/Makefile.inc index e646f71f97..5942a752a3 100644 --- a/src/mainboard/msi/ms9185/Makefile.inc +++ b/src/mainboard/msi/ms9185/Makefile.inc @@ -2,8 +2,8 @@ driver-y += mainboard.o # Needed by irq_tables and mptable and acpi_tables. obj-y += get_bus_conf.o -obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o # This is part of the conversion to init-obj and away from included code. diff --git a/src/mainboard/msi/ms9185/Options.lb b/src/mainboard/msi/ms9185/Options.lb index 1f36498c00..41bbc995aa 100644 --- a/src/mainboard/msi/ms9185/Options.lb +++ b/src/mainboard/msi/ms9185/Options.lb @@ -22,9 +22,9 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE -uses CONFIG_HAVE_ACPI_TABLES +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE +uses CONFIG_GENERATE_ACPI_TABLES uses CONFIG_HAVE_ACPI_RESUME uses CONFIG_ACPI_SSDTX_NUM uses CONFIG_USE_FALLBACK_IMAGE @@ -133,17 +133,17 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=11 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ACPI tables will be included -#default CONFIG_HAVE_ACPI_TABLES=1 +#default CONFIG_GENERATE_ACPI_TABLES=1 ## extra SSDT num #default CONFIG_ACPI_SSDTX_NUM=1 diff --git a/src/mainboard/msi/ms9282/Config.lb b/src/mainboard/msi/ms9282/Config.lb index 056f7ad16c..af320ea189 100644 --- a/src/mainboard/msi/ms9282/Config.lb +++ b/src/mainboard/msi/ms9282/Config.lb @@ -41,8 +41,8 @@ driver mainboard.o object get_bus_conf.o -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end #object reset.o if CONFIG_USE_INIT diff --git a/src/mainboard/msi/ms9282/Kconfig b/src/mainboard/msi/ms9282/Kconfig index 8b6e0c1470..ce574994ab 100644 --- a/src/mainboard/msi/ms9282/Kconfig +++ b/src/mainboard/msi/ms9282/Kconfig @@ -7,11 +7,11 @@ config BOARD_MSI_MS9282 select NORTHBRIDGE_AMD_AMDK8_ROOT_COMPLEX select SOUTHBRIDGE_NVIDIA_MCP55 select SUPERIO_WINBOND_W83627EHG - select PIRQ_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE select USE_PRINTK_IN_CAR select USE_DCACHE_RAM select HAVE_HARD_RESET - select HAVE_HIGH_TABLES select IOAPIC select MEM_TRAIN_SEQ select SB_HT_CHAIN_UNITID_OFFSET_ONLY diff --git a/src/mainboard/msi/ms9282/Makefile.inc b/src/mainboard/msi/ms9282/Makefile.inc index 7be20a2698..510ee6f046 100644 --- a/src/mainboard/msi/ms9282/Makefile.inc +++ b/src/mainboard/msi/ms9282/Makefile.inc @@ -25,8 +25,8 @@ driver-y += ../../../drivers/i2c/adm1027/adm1027.o #needed by irq_tables and mptable and acpi_tables obj-y += get_bus_conf.o -obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o obj-$(CONFIG_USE_INIT) += cache_as_ram_auto.o obj-$(CONFIG_AP_CODE_IN_CAR) += apc_auto.o diff --git a/src/mainboard/msi/ms9282/Options.lb b/src/mainboard/msi/ms9282/Options.lb index 6ed187a8b2..146cc217e0 100644 --- a/src/mainboard/msi/ms9282/Options.lb +++ b/src/mainboard/msi/ms9282/Options.lb @@ -22,8 +22,8 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -128,14 +128,14 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=11 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ## Build code to export a CMOS option table diff --git a/src/mainboard/nec/powermate2000/Config.lb b/src/mainboard/nec/powermate2000/Config.lb index 118d61554c..c7a8615983 100644 --- a/src/mainboard/nec/powermate2000/Config.lb +++ b/src/mainboard/nec/powermate2000/Config.lb @@ -24,7 +24,7 @@ include /config/nofailovercalculation.lb arch i386 end driver mainboard.o -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end # object reset.o makerule ./failover.E depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc" diff --git a/src/mainboard/nec/powermate2000/Options.lb b/src/mainboard/nec/powermate2000/Options.lb index 38d87f11b0..735f30c7de 100644 --- a/src/mainboard/nec/powermate2000/Options.lb +++ b/src/mainboard/nec/powermate2000/Options.lb @@ -18,8 +18,8 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -46,7 +46,7 @@ uses CONFIG_ROMBASE uses CONFIG_RAMBASE uses CONFIG_XIP_ROM_SIZE uses CONFIG_XIP_ROM_BASE -uses CONFIG_HAVE_MP_TABLE +uses CONFIG_GENERATE_MP_TABLE uses CONFIG_CROSS_COMPILE uses CC uses HOSTCC @@ -64,9 +64,9 @@ uses CONFIG_PCI_ROM_RUN default CONFIG_ROM_SIZE = 512 * 1024 default CONFIG_HAVE_FALLBACK_BOOT = 1 -default CONFIG_HAVE_MP_TABLE = 0 +default CONFIG_GENERATE_MP_TABLE = 0 default CONFIG_HAVE_HARD_RESET = 0 -default CONFIG_HAVE_PIRQ_TABLE = 1 +default CONFIG_GENERATE_PIRQ_TABLE = 1 default CONFIG_IRQ_SLOT_COUNT = 5 # Override this in targets/*/Config.lb. default CONFIG_MAINBOARD_VENDOR = "N/A" # Override this in targets/*/Config.lb. default CONFIG_MAINBOARD_PART_NUMBER = "N/A" # Override this in targets/*/Config.lb. diff --git a/src/mainboard/newisys/khepri/Config.lb b/src/mainboard/newisys/khepri/Config.lb index f24c351130..72ded47327 100644 --- a/src/mainboard/newisys/khepri/Config.lb +++ b/src/mainboard/newisys/khepri/Config.lb @@ -13,8 +13,8 @@ arch i386 end ## driver mainboard.o -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end #object reset.o if CONFIG_USE_INIT diff --git a/src/mainboard/newisys/khepri/Kconfig b/src/mainboard/newisys/khepri/Kconfig index 84285ff322..350d583baf 100644 --- a/src/mainboard/newisys/khepri/Kconfig +++ b/src/mainboard/newisys/khepri/Kconfig @@ -9,6 +9,7 @@ config BOARD_NEWISYS_KHEPRI select SOUTHBRIDGE_AMD_AMD8131 select SUPERIO_WINBOND_W83627HF select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE select USE_PRINTK_IN_CAR select USE_DCACHE_RAM select HAVE_HARD_RESET diff --git a/src/mainboard/newisys/khepri/Makefile.inc b/src/mainboard/newisys/khepri/Makefile.inc index 86d71e152b..c382cc681d 100644 --- a/src/mainboard/newisys/khepri/Makefile.inc +++ b/src/mainboard/newisys/khepri/Makefile.inc @@ -21,8 +21,8 @@ driver-y += mainboard.o -obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o # This is part of the conversion to init-obj and away from included code. diff --git a/src/mainboard/newisys/khepri/Options.lb b/src/mainboard/newisys/khepri/Options.lb index 266f7ba266..ad54dc6037 100644 --- a/src/mainboard/newisys/khepri/Options.lb +++ b/src/mainboard/newisys/khepri/Options.lb @@ -1,5 +1,5 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -85,14 +85,14 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=9 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ## Build code to export a CMOS option table diff --git a/src/mainboard/nvidia/l1_2pvv/Config.lb b/src/mainboard/nvidia/l1_2pvv/Config.lb index 978e88f795..eab69e6114 100644 --- a/src/mainboard/nvidia/l1_2pvv/Config.lb +++ b/src/mainboard/nvidia/l1_2pvv/Config.lb @@ -33,11 +33,11 @@ driver mainboard.o #needed by irq_tables and mptable and acpi_tables object get_bus_conf.o -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end #object reset.o -if CONFIG_HAVE_ACPI_TABLES +if CONFIG_GENERATE_ACPI_TABLES object acpi_tables.o object fadt.o makerule dsdt.c diff --git a/src/mainboard/nvidia/l1_2pvv/Kconfig b/src/mainboard/nvidia/l1_2pvv/Kconfig index a153993f09..4e9dc600c1 100644 --- a/src/mainboard/nvidia/l1_2pvv/Kconfig +++ b/src/mainboard/nvidia/l1_2pvv/Kconfig @@ -7,11 +7,11 @@ config BOARD_NVIDIA_L1_2PVV select NORTHBRIDGE_AMD_AMDK8_ROOT_COMPLEX select SOUTHBRIDGE_NVIDIA_MCP55 select SUPERIO_WINBOND_W83627EHG - select PIRQ_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE select USE_PRINTK_IN_CAR select USE_DCACHE_RAM select HAVE_HARD_RESET - select HAVE_HIGH_TABLES select IOAPIC select MEM_TRAIN_SEQ select SB_HT_CHAIN_UNITID_OFFSET_ONLY diff --git a/src/mainboard/nvidia/l1_2pvv/Makefile.inc b/src/mainboard/nvidia/l1_2pvv/Makefile.inc index 56cbf31bf0..66cc3e6cb0 100644 --- a/src/mainboard/nvidia/l1_2pvv/Makefile.inc +++ b/src/mainboard/nvidia/l1_2pvv/Makefile.inc @@ -23,8 +23,8 @@ driver-y += mainboard.o #needed by irq_tables and mptable and acpi_tables obj-y += get_bus_conf.o -obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o obj-$(CONFIG_USE_INIT) += cache_as_ram_auto.o obj-$(CONFIG_AP_CODE_IN_CAR) += apc_auto.o diff --git a/src/mainboard/nvidia/l1_2pvv/Options.lb b/src/mainboard/nvidia/l1_2pvv/Options.lb index 3b86621304..a3d8f8e3ee 100644 --- a/src/mainboard/nvidia/l1_2pvv/Options.lb +++ b/src/mainboard/nvidia/l1_2pvv/Options.lb @@ -19,9 +19,9 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE -uses CONFIG_HAVE_ACPI_TABLES +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE +uses CONFIG_GENERATE_ACPI_TABLES uses CONFIG_HAVE_ACPI_RESUME uses CONFIG_ACPI_SSDTX_NUM uses CONFIG_USE_FALLBACK_IMAGE @@ -149,17 +149,17 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=11 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ACPI tables will be included -default CONFIG_HAVE_ACPI_TABLES=0 +default CONFIG_GENERATE_ACPI_TABLES=0 ## ## Build code to export a CMOS option table diff --git a/src/mainboard/olpc/btest/Config.lb b/src/mainboard/olpc/btest/Config.lb index c35fb90a69..cc9c07306e 100644 --- a/src/mainboard/olpc/btest/Config.lb +++ b/src/mainboard/olpc/btest/Config.lb @@ -14,7 +14,7 @@ arch i386 end driver mainboard.o -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end #object reset.o ## diff --git a/src/mainboard/olpc/btest/Options.lb b/src/mainboard/olpc/btest/Options.lb index c80ce54bfc..ab05e04e5c 100644 --- a/src/mainboard/olpc/btest/Options.lb +++ b/src/mainboard/olpc/btest/Options.lb @@ -1,5 +1,5 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -27,7 +27,7 @@ uses CONFIG_ROMBASE uses CONFIG_RAMBASE uses CONFIG_XIP_ROM_SIZE uses CONFIG_XIP_ROM_BASE -uses CONFIG_HAVE_MP_TABLE +uses CONFIG_GENERATE_MP_TABLE uses CONFIG_CROSS_COMPILE uses CC uses HOSTCC @@ -56,7 +56,7 @@ default CONFIG_HAVE_FALLBACK_BOOT=1 ## ## no MP table ## -default CONFIG_HAVE_MP_TABLE=0 +default CONFIG_GENERATE_MP_TABLE=0 ## ## Build code to reset the motherboard from coreboot @@ -71,7 +71,7 @@ default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=2 #object irq_tables.o diff --git a/src/mainboard/olpc/rev_a/Config.lb b/src/mainboard/olpc/rev_a/Config.lb index c35fb90a69..cc9c07306e 100644 --- a/src/mainboard/olpc/rev_a/Config.lb +++ b/src/mainboard/olpc/rev_a/Config.lb @@ -14,7 +14,7 @@ arch i386 end driver mainboard.o -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end #object reset.o ## diff --git a/src/mainboard/olpc/rev_a/Options.lb b/src/mainboard/olpc/rev_a/Options.lb index c80ce54bfc..ab05e04e5c 100644 --- a/src/mainboard/olpc/rev_a/Options.lb +++ b/src/mainboard/olpc/rev_a/Options.lb @@ -1,5 +1,5 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -27,7 +27,7 @@ uses CONFIG_ROMBASE uses CONFIG_RAMBASE uses CONFIG_XIP_ROM_SIZE uses CONFIG_XIP_ROM_BASE -uses CONFIG_HAVE_MP_TABLE +uses CONFIG_GENERATE_MP_TABLE uses CONFIG_CROSS_COMPILE uses CC uses HOSTCC @@ -56,7 +56,7 @@ default CONFIG_HAVE_FALLBACK_BOOT=1 ## ## no MP table ## -default CONFIG_HAVE_MP_TABLE=0 +default CONFIG_GENERATE_MP_TABLE=0 ## ## Build code to reset the motherboard from coreboot @@ -71,7 +71,7 @@ default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=2 #object irq_tables.o diff --git a/src/mainboard/pcengines/alix1c/Config.lb b/src/mainboard/pcengines/alix1c/Config.lb index 0580d746d9..579397d88b 100644 --- a/src/mainboard/pcengines/alix1c/Config.lb +++ b/src/mainboard/pcengines/alix1c/Config.lb @@ -34,7 +34,7 @@ arch i386 end driver mainboard.o -if CONFIG_HAVE_PIRQ_TABLE +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end diff --git a/src/mainboard/pcengines/alix1c/Makefile.inc b/src/mainboard/pcengines/alix1c/Makefile.inc index 90b154a4e1..4a26b97508 100644 --- a/src/mainboard/pcengines/alix1c/Makefile.inc +++ b/src/mainboard/pcengines/alix1c/Makefile.inc @@ -1,7 +1,7 @@ driver-y += mainboard.o # Needed by irq_tables and mptable and acpi_tables. -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o # This is part of the conversion to init-obj and away from included code. diff --git a/src/mainboard/pcengines/alix1c/Options.lb b/src/mainboard/pcengines/alix1c/Options.lb index dab333d653..37fa14a317 100644 --- a/src/mainboard/pcengines/alix1c/Options.lb +++ b/src/mainboard/pcengines/alix1c/Options.lb @@ -18,8 +18,8 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -47,7 +47,7 @@ uses CONFIG_ROMBASE uses CONFIG_RAMBASE uses CONFIG_XIP_ROM_SIZE uses CONFIG_XIP_ROM_BASE -uses CONFIG_HAVE_MP_TABLE +uses CONFIG_GENERATE_MP_TABLE uses CONFIG_CROSS_COMPILE uses CC uses HOSTCC @@ -87,7 +87,7 @@ default CONFIG_HAVE_FALLBACK_BOOT=1 ## ## no MP table ## -default CONFIG_HAVE_MP_TABLE=0 +default CONFIG_GENERATE_MP_TABLE=0 ## ## Build code to reset the motherboard from coreboot @@ -102,7 +102,7 @@ default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=5 default CONFIG_PIRQ_ROUTE=1 ## diff --git a/src/mainboard/rca/rm4100/Config.lb b/src/mainboard/rca/rm4100/Config.lb index ce254cd252..125117e78d 100644 --- a/src/mainboard/rca/rm4100/Config.lb +++ b/src/mainboard/rca/rm4100/Config.lb @@ -24,9 +24,9 @@ include /config/nofailovercalculation.lb arch i386 end driver mainboard.o -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end # object reset.o -if CONFIG_HAVE_ACPI_TABLES +if CONFIG_GENERATE_ACPI_TABLES object fadt.o object dsdt.o object acpi_tables.o diff --git a/src/mainboard/rca/rm4100/Options.lb b/src/mainboard/rca/rm4100/Options.lb index bd9fc038a1..c9b28ce388 100644 --- a/src/mainboard/rca/rm4100/Options.lb +++ b/src/mainboard/rca/rm4100/Options.lb @@ -32,12 +32,12 @@ uses CONFIG_VIDEO_MB uses CONFIG_CROSS_COMPILE uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL uses CONFIG_FALLBACK_SIZE -uses CONFIG_HAVE_ACPI_TABLES +uses CONFIG_GENERATE_ACPI_TABLES uses CONFIG_HAVE_ACPI_RESUME uses CONFIG_HAVE_FALLBACK_BOOT -uses CONFIG_HAVE_MP_TABLE +uses CONFIG_GENERATE_MP_TABLE uses CONFIG_HAVE_OPTION_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_HEAP_SIZE uses HOSTCC uses CONFIG_IRQ_SLOT_COUNT @@ -68,10 +68,10 @@ default CONFIG_HAVE_FALLBACK_BOOT = 1 default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE default CONFIG_UDELAY_TSC = 1 default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1 -default CONFIG_HAVE_PIRQ_TABLE = 1 +default CONFIG_GENERATE_PIRQ_TABLE = 1 default CONFIG_IRQ_SLOT_COUNT = 7 -default CONFIG_HAVE_MP_TABLE = 0 -default CONFIG_HAVE_ACPI_TABLES = 0 +default CONFIG_GENERATE_MP_TABLE = 0 +default CONFIG_GENERATE_ACPI_TABLES = 0 default CONFIG_IOAPIC = 0 default CONFIG_HAVE_OPTION_TABLE = 0 default CONFIG_CONSOLE_VGA = 0 diff --git a/src/mainboard/soyo/sy-6ba-plus-iii/Config.lb b/src/mainboard/soyo/sy-6ba-plus-iii/Config.lb index 87a9c7dc1f..5f008461dc 100644 --- a/src/mainboard/soyo/sy-6ba-plus-iii/Config.lb +++ b/src/mainboard/soyo/sy-6ba-plus-iii/Config.lb @@ -25,7 +25,7 @@ default CONFIG_XIP_ROM_BASE = 0xffffffff - CONFIG_XIP_ROM_SIZE + 1 arch i386 end driver mainboard.o -if CONFIG_HAVE_PIRQ_TABLE +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end makerule ./failover.E diff --git a/src/mainboard/soyo/sy-6ba-plus-iii/Options.lb b/src/mainboard/soyo/sy-6ba-plus-iii/Options.lb index 3f668631af..61b24fc566 100644 --- a/src/mainboard/soyo/sy-6ba-plus-iii/Options.lb +++ b/src/mainboard/soyo/sy-6ba-plus-iii/Options.lb @@ -18,8 +18,8 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -45,7 +45,7 @@ uses CONFIG_ROMBASE uses CONFIG_RAMBASE uses CONFIG_XIP_ROM_SIZE uses CONFIG_XIP_ROM_BASE -uses CONFIG_HAVE_MP_TABLE +uses CONFIG_GENERATE_MP_TABLE uses CONFIG_CROSS_COMPILE uses CC uses HOSTCC @@ -65,11 +65,11 @@ uses CONFIG_PCI_ROM_RUN default CONFIG_ROM_SIZE = 256 * 1024 default CONFIG_HAVE_FALLBACK_BOOT = 1 -default CONFIG_HAVE_MP_TABLE = 0 +default CONFIG_GENERATE_MP_TABLE = 0 default CONFIG_HAVE_HARD_RESET = 0 default CONFIG_UDELAY_TSC = 1 default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1 -default CONFIG_HAVE_PIRQ_TABLE = 1 +default CONFIG_GENERATE_PIRQ_TABLE = 1 default CONFIG_IRQ_SLOT_COUNT = 7 # Override this in targets/*/Config.lb. default CONFIG_MAINBOARD_VENDOR = "N/A" # Override this in targets/*/Config.lb. default CONFIG_MAINBOARD_PART_NUMBER = "N/A" # Override this in targets/*/Config.lb. diff --git a/src/mainboard/sunw/ultra40/Config.lb b/src/mainboard/sunw/ultra40/Config.lb index 450b293a1c..908b9774d1 100644 --- a/src/mainboard/sunw/ultra40/Config.lb +++ b/src/mainboard/sunw/ultra40/Config.lb @@ -14,8 +14,8 @@ driver mainboard.o #needed by irq_tables and mptable and acpi_tables object get_bus_conf.o -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end #object reset.o if CONFIG_USE_INIT makerule ./auto.o diff --git a/src/mainboard/sunw/ultra40/Kconfig b/src/mainboard/sunw/ultra40/Kconfig index bc4513b09a..5e09db747a 100644 --- a/src/mainboard/sunw/ultra40/Kconfig +++ b/src/mainboard/sunw/ultra40/Kconfig @@ -8,6 +8,7 @@ config BOARD_SUNW_ULTRA40 select SOUTHBRIDGE_NVIDIA_CK804 select SUPERIO_SMSC_LPC47M10X select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE select USE_PRINTK_IN_CAR select USE_DCACHE_RAM select HAVE_HARD_RESET diff --git a/src/mainboard/sunw/ultra40/Makefile.inc b/src/mainboard/sunw/ultra40/Makefile.inc index bfba66832d..6bbef3cfff 100644 --- a/src/mainboard/sunw/ultra40/Makefile.inc +++ b/src/mainboard/sunw/ultra40/Makefile.inc @@ -23,8 +23,8 @@ driver-y += mainboard.o # Needed by irq_tables and mptable and acpi_tables. obj-y += get_bus_conf.o -obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o # This is part of the conversion to init-obj and away from included code. diff --git a/src/mainboard/sunw/ultra40/Options.lb b/src/mainboard/sunw/ultra40/Options.lb index 8c0fef5fa9..c9d550ed8d 100644 --- a/src/mainboard/sunw/ultra40/Options.lb +++ b/src/mainboard/sunw/ultra40/Options.lb @@ -1,5 +1,5 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -98,14 +98,14 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=11 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ## Build code to export a CMOS option table diff --git a/src/mainboard/supermicro/h8dme/Config.lb b/src/mainboard/supermicro/h8dme/Config.lb index 9c07ae9b6f..330980514e 100644 --- a/src/mainboard/supermicro/h8dme/Config.lb +++ b/src/mainboard/supermicro/h8dme/Config.lb @@ -30,8 +30,8 @@ driver mainboard.o #needed by irq_tables and mptable and acpi_tables object get_bus_conf.o -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end #object reset.o if CONFIG_USE_INIT diff --git a/src/mainboard/supermicro/h8dme/Kconfig b/src/mainboard/supermicro/h8dme/Kconfig index e07614b952..ccf07ebfcd 100644 --- a/src/mainboard/supermicro/h8dme/Kconfig +++ b/src/mainboard/supermicro/h8dme/Kconfig @@ -8,6 +8,7 @@ config BOARD_SUPERMICRO_H8DME select SOUTHBRIDGE_NVIDIA_MCP55 select SUPERIO_WINBOND_W83627HF select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE select USE_PRINTK_IN_CAR select USE_DCACHE_RAM select HAVE_HARD_RESET diff --git a/src/mainboard/supermicro/h8dme/Makefile.inc b/src/mainboard/supermicro/h8dme/Makefile.inc index d8864fe1b7..8075ba2a34 100644 --- a/src/mainboard/supermicro/h8dme/Makefile.inc +++ b/src/mainboard/supermicro/h8dme/Makefile.inc @@ -24,8 +24,8 @@ driver-y += ../../../drivers/i2c/i2cmux2/i2cmux2.o # Needed by irq_tables and mptable and acpi_tables. obj-y += get_bus_conf.o -obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o # This is part of the conversion to init-obj and away from included code. diff --git a/src/mainboard/supermicro/h8dme/Options.lb b/src/mainboard/supermicro/h8dme/Options.lb index 8737537318..9f7095c43c 100644 --- a/src/mainboard/supermicro/h8dme/Options.lb +++ b/src/mainboard/supermicro/h8dme/Options.lb @@ -19,9 +19,9 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE -uses CONFIG_HAVE_ACPI_TABLES +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE +uses CONFIG_GENERATE_ACPI_TABLES uses CONFIG_HAVE_ACPI_RESUME uses CONFIG_ACPI_SSDTX_NUM uses CONFIG_USE_FALLBACK_IMAGE @@ -153,17 +153,17 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=11 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ACPI tables will be included -default CONFIG_HAVE_ACPI_TABLES=0 +default CONFIG_GENERATE_ACPI_TABLES=0 ## ## Build code to export a CMOS option table diff --git a/src/mainboard/supermicro/h8dmr/Config.lb b/src/mainboard/supermicro/h8dmr/Config.lb index 2aca572d6c..05f4514ed2 100644 --- a/src/mainboard/supermicro/h8dmr/Config.lb +++ b/src/mainboard/supermicro/h8dmr/Config.lb @@ -33,8 +33,8 @@ driver mainboard.o #needed by irq_tables and mptable and acpi_tables object get_bus_conf.o -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end #object reset.o if CONFIG_USE_INIT diff --git a/src/mainboard/supermicro/h8dmr/Kconfig b/src/mainboard/supermicro/h8dmr/Kconfig index 4cb20f4c60..3a359af61d 100644 --- a/src/mainboard/supermicro/h8dmr/Kconfig +++ b/src/mainboard/supermicro/h8dmr/Kconfig @@ -8,6 +8,7 @@ config BOARD_SUPERMICRO_H8DMR select SOUTHBRIDGE_NVIDIA_MCP55 select SUPERIO_WINBOND_W83627HF select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE select USE_PRINTK_IN_CAR select USE_DCACHE_RAM select HAVE_HARD_RESET diff --git a/src/mainboard/supermicro/h8dmr/Makefile.inc b/src/mainboard/supermicro/h8dmr/Makefile.inc index 085b7d0df3..8b64208a18 100644 --- a/src/mainboard/supermicro/h8dmr/Makefile.inc +++ b/src/mainboard/supermicro/h8dmr/Makefile.inc @@ -23,8 +23,8 @@ driver-y += mainboard.o # Needed by irq_tables and mptable and acpi_tables. obj-y += get_bus_conf.o -obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o # This is part of the conversion to init-obj and away from included code. diff --git a/src/mainboard/supermicro/h8dmr/Options.lb b/src/mainboard/supermicro/h8dmr/Options.lb index 739fe16905..f95c63c4ba 100644 --- a/src/mainboard/supermicro/h8dmr/Options.lb +++ b/src/mainboard/supermicro/h8dmr/Options.lb @@ -19,9 +19,9 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE -uses CONFIG_HAVE_ACPI_TABLES +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE +uses CONFIG_GENERATE_ACPI_TABLES uses CONFIG_HAVE_ACPI_RESUME uses CONFIG_ACPI_SSDTX_NUM uses CONFIG_USE_FALLBACK_IMAGE @@ -146,17 +146,17 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=11 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ACPI tables will be included -default CONFIG_HAVE_ACPI_TABLES=0 +default CONFIG_GENERATE_ACPI_TABLES=0 ## ## Build code to export a CMOS option table diff --git a/src/mainboard/supermicro/h8dmr_fam10/Config.lb b/src/mainboard/supermicro/h8dmr_fam10/Config.lb index c6a8c531bb..d3d8fa83ac 100644 --- a/src/mainboard/supermicro/h8dmr_fam10/Config.lb +++ b/src/mainboard/supermicro/h8dmr_fam10/Config.lb @@ -35,8 +35,8 @@ driver mainboard.o #needed by irq_tables and mptable and acpi_tables object get_bus_conf.o -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end #object reset.o if CONFIG_USE_INIT diff --git a/src/mainboard/supermicro/h8dmr_fam10/Kconfig b/src/mainboard/supermicro/h8dmr_fam10/Kconfig index 3d6b375a7c..67ec6824fd 100644 --- a/src/mainboard/supermicro/h8dmr_fam10/Kconfig +++ b/src/mainboard/supermicro/h8dmr_fam10/Kconfig @@ -8,6 +8,7 @@ config BOARD_SUPERMICRO_H8DMR_FAM10 select SOUTHBRIDGE_NVIDIA_MCP55 select SUPERIO_WINBOND_W83627HF select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE select USE_PRINTK_IN_CAR select USE_DCACHE_RAM select HAVE_HARD_RESET diff --git a/src/mainboard/supermicro/h8dmr_fam10/Makefile.inc b/src/mainboard/supermicro/h8dmr_fam10/Makefile.inc index 085b7d0df3..8b64208a18 100644 --- a/src/mainboard/supermicro/h8dmr_fam10/Makefile.inc +++ b/src/mainboard/supermicro/h8dmr_fam10/Makefile.inc @@ -23,8 +23,8 @@ driver-y += mainboard.o # Needed by irq_tables and mptable and acpi_tables. obj-y += get_bus_conf.o -obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o # This is part of the conversion to init-obj and away from included code. diff --git a/src/mainboard/supermicro/h8dmr_fam10/Options.lb b/src/mainboard/supermicro/h8dmr_fam10/Options.lb index f7b602af0c..2ad708a813 100644 --- a/src/mainboard/supermicro/h8dmr_fam10/Options.lb +++ b/src/mainboard/supermicro/h8dmr_fam10/Options.lb @@ -19,9 +19,9 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE -uses CONFIG_HAVE_ACPI_TABLES +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE +uses CONFIG_GENERATE_ACPI_TABLES uses CONFIG_HAVE_ACPI_RESUME uses CONFIG_ACPI_SSDTX_NUM uses CONFIG_USE_FALLBACK_IMAGE @@ -148,17 +148,17 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=11 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ACPI tables will be included -default CONFIG_HAVE_ACPI_TABLES=0 +default CONFIG_GENERATE_ACPI_TABLES=0 ## ## Build code to export a CMOS option table diff --git a/src/mainboard/supermicro/x6dai_g/Config.lb b/src/mainboard/supermicro/x6dai_g/Config.lb index 3e9a87eb77..2756977d8e 100644 --- a/src/mainboard/supermicro/x6dai_g/Config.lb +++ b/src/mainboard/supermicro/x6dai_g/Config.lb @@ -18,8 +18,8 @@ arch i386 end ## driver mainboard.o -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end object reset.o ## diff --git a/src/mainboard/supermicro/x6dai_g/Kconfig b/src/mainboard/supermicro/x6dai_g/Kconfig index 4c965749eb..c6f73347bf 100644 --- a/src/mainboard/supermicro/x6dai_g/Kconfig +++ b/src/mainboard/supermicro/x6dai_g/Kconfig @@ -5,7 +5,8 @@ config BOARD_SUPERMICRO_X6DAI_G select NORTHBRIDGE_INTEL_E7525 select SOUTHBRIDGE_INTEL_ESB6300 select SUPERIO_WINBOND_W83627HF - select PIRQ_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE config MAINBOARD_DIR string diff --git a/src/mainboard/supermicro/x6dai_g/Options.lb b/src/mainboard/supermicro/x6dai_g/Options.lb index e3c9912495..626f0bebb3 100644 --- a/src/mainboard/supermicro/x6dai_g/Options.lb +++ b/src/mainboard/supermicro/x6dai_g/Options.lb @@ -1,5 +1,5 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -80,14 +80,14 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=15 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ## Build code to export a CMOS option table diff --git a/src/mainboard/supermicro/x6dhe_g/Config.lb b/src/mainboard/supermicro/x6dhe_g/Config.lb index 2c34ff390d..deaee0416a 100644 --- a/src/mainboard/supermicro/x6dhe_g/Config.lb +++ b/src/mainboard/supermicro/x6dhe_g/Config.lb @@ -17,8 +17,8 @@ arch i386 end ## driver mainboard.o -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end object reset.o ## diff --git a/src/mainboard/supermicro/x6dhe_g/Kconfig b/src/mainboard/supermicro/x6dhe_g/Kconfig index ecbe7d7905..467859a5dc 100644 --- a/src/mainboard/supermicro/x6dhe_g/Kconfig +++ b/src/mainboard/supermicro/x6dhe_g/Kconfig @@ -6,7 +6,8 @@ config BOARD_SUPERMICRO_X6DHE_G select SOUTHBRIDGE_INTEL_ESB6300 select SOUTHBRIDGE_INTEL_PXHD select SUPERIO_WINBOND_W83627HF - select PIRQ_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE config MAINBOARD_DIR string diff --git a/src/mainboard/supermicro/x6dhe_g/Options.lb b/src/mainboard/supermicro/x6dhe_g/Options.lb index fcc68a2968..87be848afb 100644 --- a/src/mainboard/supermicro/x6dhe_g/Options.lb +++ b/src/mainboard/supermicro/x6dhe_g/Options.lb @@ -1,5 +1,5 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -80,14 +80,14 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=15 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ## Build code to export a CMOS option table diff --git a/src/mainboard/supermicro/x6dhe_g2/Config.lb b/src/mainboard/supermicro/x6dhe_g2/Config.lb index 722a02077a..3d7ed96543 100644 --- a/src/mainboard/supermicro/x6dhe_g2/Config.lb +++ b/src/mainboard/supermicro/x6dhe_g2/Config.lb @@ -17,8 +17,8 @@ arch i386 end ## driver mainboard.o -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end object reset.o ## diff --git a/src/mainboard/supermicro/x6dhe_g2/Kconfig b/src/mainboard/supermicro/x6dhe_g2/Kconfig index d0eb1ed260..c651cc0c69 100644 --- a/src/mainboard/supermicro/x6dhe_g2/Kconfig +++ b/src/mainboard/supermicro/x6dhe_g2/Kconfig @@ -6,7 +6,8 @@ config BOARD_SUPERMICRO_X6DHE_G2 select SOUTHBRIDGE_INTEL_I82801ER select SOUTHBRIDGE_INTEL_PXHD select SUPERIO_NSC_PC87427 - select PIRQ_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE config MAINBOARD_DIR string diff --git a/src/mainboard/supermicro/x6dhe_g2/Options.lb b/src/mainboard/supermicro/x6dhe_g2/Options.lb index fcc68a2968..87be848afb 100644 --- a/src/mainboard/supermicro/x6dhe_g2/Options.lb +++ b/src/mainboard/supermicro/x6dhe_g2/Options.lb @@ -1,5 +1,5 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -80,14 +80,14 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=15 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ## Build code to export a CMOS option table diff --git a/src/mainboard/supermicro/x6dhr_ig/Config.lb b/src/mainboard/supermicro/x6dhr_ig/Config.lb index e2d37dc7ca..1dfafd51cb 100644 --- a/src/mainboard/supermicro/x6dhr_ig/Config.lb +++ b/src/mainboard/supermicro/x6dhr_ig/Config.lb @@ -18,8 +18,8 @@ arch i386 end ## driver mainboard.o -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end object reset.o ## diff --git a/src/mainboard/supermicro/x6dhr_ig/Kconfig b/src/mainboard/supermicro/x6dhr_ig/Kconfig index 32a8183d46..c5d6cf3856 100644 --- a/src/mainboard/supermicro/x6dhr_ig/Kconfig +++ b/src/mainboard/supermicro/x6dhr_ig/Kconfig @@ -6,7 +6,8 @@ config BOARD_SUPERMICRO_X6DHR_IG select SOUTHBRIDGE_INTEL_I82801ER select SOUTHBRIDGE_INTEL_PXHD select SUPERIO_WINBOND_W83627HF - select PIRQ_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE config MAINBOARD_DIR string diff --git a/src/mainboard/supermicro/x6dhr_ig/Options.lb b/src/mainboard/supermicro/x6dhr_ig/Options.lb index 2698b3b418..d8b836bfc4 100644 --- a/src/mainboard/supermicro/x6dhr_ig/Options.lb +++ b/src/mainboard/supermicro/x6dhr_ig/Options.lb @@ -1,5 +1,5 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -80,14 +80,14 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=15 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ## Build code to export a CMOS option table diff --git a/src/mainboard/supermicro/x6dhr_ig2/Config.lb b/src/mainboard/supermicro/x6dhr_ig2/Config.lb index 566b776c15..09147e4c8f 100644 --- a/src/mainboard/supermicro/x6dhr_ig2/Config.lb +++ b/src/mainboard/supermicro/x6dhr_ig2/Config.lb @@ -18,8 +18,8 @@ arch i386 end ## driver mainboard.o -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end object reset.o ## diff --git a/src/mainboard/supermicro/x6dhr_ig2/Kconfig b/src/mainboard/supermicro/x6dhr_ig2/Kconfig index eee564050e..8d88331cdc 100644 --- a/src/mainboard/supermicro/x6dhr_ig2/Kconfig +++ b/src/mainboard/supermicro/x6dhr_ig2/Kconfig @@ -6,7 +6,8 @@ config BOARD_SUPERMICRO_X6DHR_IG2 select SOUTHBRIDGE_INTEL_I82801ER select SOUTHBRIDGE_INTEL_PXHD select SUPERIO_WINBOND_W83627HF - select PIRQ_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE config MAINBOARD_DIR string diff --git a/src/mainboard/supermicro/x6dhr_ig2/Options.lb b/src/mainboard/supermicro/x6dhr_ig2/Options.lb index 2698b3b418..d8b836bfc4 100644 --- a/src/mainboard/supermicro/x6dhr_ig2/Options.lb +++ b/src/mainboard/supermicro/x6dhr_ig2/Options.lb @@ -1,5 +1,5 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -80,14 +80,14 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=15 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ## Build code to export a CMOS option table diff --git a/src/mainboard/technexion/tim5690/Config.lb b/src/mainboard/technexion/tim5690/Config.lb index 96fe267d25..3e69acc0ff 100644 --- a/src/mainboard/technexion/tim5690/Config.lb +++ b/src/mainboard/technexion/tim5690/Config.lb @@ -33,13 +33,13 @@ driver mainboard.o #dir /drivers/si/3114 -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object get_bus_conf.o object irq_tables.o end -if CONFIG_HAVE_ACPI_TABLES +if CONFIG_GENERATE_ACPI_TABLES object acpi_tables.o object fadt.o makerule dsdt.c diff --git a/src/mainboard/technexion/tim5690/Kconfig b/src/mainboard/technexion/tim5690/Kconfig index 2e4ea5f973..20194a1dbb 100644 --- a/src/mainboard/technexion/tim5690/Kconfig +++ b/src/mainboard/technexion/tim5690/Kconfig @@ -9,6 +9,7 @@ config BOARD_TECHNEXION_TIM5690 select SOUTHBRIDGE_AMD_SB600 select SUPERIO_ITE_IT8712F select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE select USE_PRINTK_IN_CAR select USE_DCACHE_RAM select HAVE_HARD_RESET diff --git a/src/mainboard/technexion/tim5690/Makefile.inc b/src/mainboard/technexion/tim5690/Makefile.inc index 0a2460d166..317f9ca1c5 100644 --- a/src/mainboard/technexion/tim5690/Makefile.inc +++ b/src/mainboard/technexion/tim5690/Makefile.inc @@ -23,11 +23,11 @@ driver-y += mainboard.o # Needed by irq_tables and mptable and acpi_tables. obj-y += get_bus_conf.o -obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += dsdt.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += acpi_tables.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += fadt.o +obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += dsdt.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += acpi_tables.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += fadt.o # This is part of the conversion to init-obj and away from included code. diff --git a/src/mainboard/technexion/tim5690/Options.lb b/src/mainboard/technexion/tim5690/Options.lb index 83174c3867..ad1e80aae5 100644 --- a/src/mainboard/technexion/tim5690/Options.lb +++ b/src/mainboard/technexion/tim5690/Options.lb @@ -19,9 +19,9 @@ ## ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE -uses CONFIG_HAVE_ACPI_TABLES +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE +uses CONFIG_GENERATE_ACPI_TABLES uses CONFIG_HAVE_ACPI_RESUME uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -119,17 +119,17 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=11 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ACPI tables will be included -default CONFIG_HAVE_ACPI_TABLES=1 +default CONFIG_GENERATE_ACPI_TABLES=1 ## ## Build code to export a CMOS option table diff --git a/src/mainboard/technexion/tim5690/mptable.c b/src/mainboard/technexion/tim5690/mptable.c index 7d7b3440fc..ee4a2ff761 100644 --- a/src/mainboard/technexion/tim5690/mptable.c +++ b/src/mainboard/technexion/tim5690/mptable.c @@ -142,7 +142,7 @@ void *smp_write_config_table(void *v) /* PCI interrupts are level triggered, and are * associated with a specific bus/device/function tuple. */ -#if CONFIG_HAVE_ACPI_TABLES == 0 +#if CONFIG_GENERATE_ACPI_TABLES == 0 #define PCI_INT(bus, dev, fn, pin) \ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), apicid_sb600, (pin)) #else diff --git a/src/mainboard/technexion/tim8690/Config.lb b/src/mainboard/technexion/tim8690/Config.lb index 9ee9be4289..904958fb2d 100644 --- a/src/mainboard/technexion/tim8690/Config.lb +++ b/src/mainboard/technexion/tim8690/Config.lb @@ -33,13 +33,13 @@ driver mainboard.o #dir /drivers/si/3114 -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object get_bus_conf.o object irq_tables.o end -if CONFIG_HAVE_ACPI_TABLES +if CONFIG_GENERATE_ACPI_TABLES object acpi_tables.o object fadt.o makerule dsdt.c diff --git a/src/mainboard/technexion/tim8690/Kconfig b/src/mainboard/technexion/tim8690/Kconfig index 8bc3b65887..d0a9e419c9 100644 --- a/src/mainboard/technexion/tim8690/Kconfig +++ b/src/mainboard/technexion/tim8690/Kconfig @@ -9,6 +9,7 @@ config BOARD_TECHNEXION_TIM8690 select SOUTHBRIDGE_AMD_SB600 select SUPERIO_ITE_IT8712F select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE select USE_PRINTK_IN_CAR select USE_DCACHE_RAM select HAVE_HARD_RESET diff --git a/src/mainboard/technexion/tim8690/Makefile.inc b/src/mainboard/technexion/tim8690/Makefile.inc index 0a2460d166..317f9ca1c5 100644 --- a/src/mainboard/technexion/tim8690/Makefile.inc +++ b/src/mainboard/technexion/tim8690/Makefile.inc @@ -23,11 +23,11 @@ driver-y += mainboard.o # Needed by irq_tables and mptable and acpi_tables. obj-y += get_bus_conf.o -obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += dsdt.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += acpi_tables.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += fadt.o +obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += dsdt.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += acpi_tables.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += fadt.o # This is part of the conversion to init-obj and away from included code. diff --git a/src/mainboard/technexion/tim8690/Options.lb b/src/mainboard/technexion/tim8690/Options.lb index d784ac1ce1..9589fcd97b 100644 --- a/src/mainboard/technexion/tim8690/Options.lb +++ b/src/mainboard/technexion/tim8690/Options.lb @@ -19,9 +19,9 @@ ## ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE -uses CONFIG_HAVE_ACPI_TABLES +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE +uses CONFIG_GENERATE_ACPI_TABLES uses CONFIG_HAVE_ACPI_RESUME uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -118,17 +118,17 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=11 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ACPI tables will be included -default CONFIG_HAVE_ACPI_TABLES=1 +default CONFIG_GENERATE_ACPI_TABLES=1 ## ## Build code to export a CMOS option table diff --git a/src/mainboard/technexion/tim8690/mptable.c b/src/mainboard/technexion/tim8690/mptable.c index fb990fd9df..6359c09934 100644 --- a/src/mainboard/technexion/tim8690/mptable.c +++ b/src/mainboard/technexion/tim8690/mptable.c @@ -142,7 +142,7 @@ void *smp_write_config_table(void *v) /* PCI interrupts are level triggered, and are * associated with a specific bus/device/function tuple. */ -#if CONFIG_HAVE_ACPI_TABLES == 0 +#if CONFIG_GENERATE_ACPI_TABLES == 0 #define PCI_INT(bus, dev, fn, pin) \ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), apicid_sb600, (pin)) #else diff --git a/src/mainboard/technologic/ts5300/Config.lb b/src/mainboard/technologic/ts5300/Config.lb index 525f82e3ef..13b0a783b4 100644 --- a/src/mainboard/technologic/ts5300/Config.lb +++ b/src/mainboard/technologic/ts5300/Config.lb @@ -16,7 +16,7 @@ arch i386 end ## driver mainboard.o -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end # object reset.o ## diff --git a/src/mainboard/technologic/ts5300/Options.lb b/src/mainboard/technologic/ts5300/Options.lb index f01cde68dc..1028c980a0 100644 --- a/src/mainboard/technologic/ts5300/Options.lb +++ b/src/mainboard/technologic/ts5300/Options.lb @@ -1,5 +1,5 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -28,7 +28,7 @@ uses CONFIG_ROMBASE uses CONFIG_RAMBASE uses CONFIG_XIP_ROM_SIZE uses CONFIG_XIP_ROM_BASE -uses CONFIG_HAVE_MP_TABLE +uses CONFIG_GENERATE_MP_TABLE uses CONFIG_CROSS_COMPILE uses CC uses HOSTCC @@ -80,7 +80,7 @@ default CONFIG_HAVE_FALLBACK_BOOT=1 ## ## no MP table ## -default CONFIG_HAVE_MP_TABLE=0 +default CONFIG_GENERATE_MP_TABLE=0 ## ## Build code to reset the motherboard from coreboot @@ -90,7 +90,7 @@ default CONFIG_HAVE_HARD_RESET=0 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=2 #object irq_tables.o diff --git a/src/mainboard/televideo/tc7020/Config.lb b/src/mainboard/televideo/tc7020/Config.lb index 66b1914ef7..114f435481 100644 --- a/src/mainboard/televideo/tc7020/Config.lb +++ b/src/mainboard/televideo/tc7020/Config.lb @@ -24,7 +24,7 @@ include /config/nofailovercalculation.lb arch i386 end driver mainboard.o -if CONFIG_HAVE_PIRQ_TABLE +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end makerule ./failover.E diff --git a/src/mainboard/televideo/tc7020/Options.lb b/src/mainboard/televideo/tc7020/Options.lb index 683b19b2ab..9b0cfb833c 100644 --- a/src/mainboard/televideo/tc7020/Options.lb +++ b/src/mainboard/televideo/tc7020/Options.lb @@ -18,8 +18,8 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -75,11 +75,11 @@ default CONFIG_ROM_SIZE = 256 * 1024 default CONFIG_MAINBOARD_VENDOR = "TeleVideo" default CONFIG_MAINBOARD_PART_NUMBER = "TC7020" default CONFIG_HAVE_FALLBACK_BOOT = 1 -default CONFIG_HAVE_MP_TABLE = 0 +default CONFIG_GENERATE_MP_TABLE = 0 default CONFIG_HAVE_HARD_RESET = 0 default CONFIG_UDELAY_TSC = 1 default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1 -default CONFIG_HAVE_PIRQ_TABLE = 1 +default CONFIG_GENERATE_PIRQ_TABLE = 1 default CONFIG_PIRQ_ROUTE=1 default CONFIG_IRQ_SLOT_COUNT = 3 # Soldered NIC, internal USB, mini PCI slot default CONFIG_HAVE_OPTION_TABLE = 0 diff --git a/src/mainboard/thomson/ip1000/Config.lb b/src/mainboard/thomson/ip1000/Config.lb index 59e4f7705c..2ee6f9605f 100644 --- a/src/mainboard/thomson/ip1000/Config.lb +++ b/src/mainboard/thomson/ip1000/Config.lb @@ -24,9 +24,9 @@ include /config/nofailovercalculation.lb arch i386 end driver mainboard.o -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end # object reset.o -if CONFIG_HAVE_ACPI_TABLES +if CONFIG_GENERATE_ACPI_TABLES object fadt.o object dsdt.o object acpi_tables.o diff --git a/src/mainboard/thomson/ip1000/Options.lb b/src/mainboard/thomson/ip1000/Options.lb index 955d4e25d0..655d94fae7 100644 --- a/src/mainboard/thomson/ip1000/Options.lb +++ b/src/mainboard/thomson/ip1000/Options.lb @@ -32,12 +32,12 @@ uses CONFIG_VIDEO_MB uses CONFIG_CROSS_COMPILE uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL uses CONFIG_FALLBACK_SIZE -uses CONFIG_HAVE_ACPI_TABLES +uses CONFIG_GENERATE_ACPI_TABLES uses CONFIG_HAVE_ACPI_RESUME uses CONFIG_HAVE_FALLBACK_BOOT -uses CONFIG_HAVE_MP_TABLE +uses CONFIG_GENERATE_MP_TABLE uses CONFIG_HAVE_OPTION_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_HEAP_SIZE uses HOSTCC uses CONFIG_IRQ_SLOT_COUNT @@ -68,10 +68,10 @@ default CONFIG_HAVE_FALLBACK_BOOT = 1 default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE default CONFIG_UDELAY_TSC = 1 default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1 -default CONFIG_HAVE_PIRQ_TABLE = 1 +default CONFIG_GENERATE_PIRQ_TABLE = 1 default CONFIG_IRQ_SLOT_COUNT = 7 -default CONFIG_HAVE_MP_TABLE = 0 -default CONFIG_HAVE_ACPI_TABLES = 0 +default CONFIG_GENERATE_MP_TABLE = 0 +default CONFIG_GENERATE_ACPI_TABLES = 0 default CONFIG_IOAPIC = 0 default CONFIG_HAVE_OPTION_TABLE = 0 default CONFIG_CONSOLE_VGA = 0 diff --git a/src/mainboard/tyan/Makefile.s289x.inc b/src/mainboard/tyan/Makefile.s289x.inc index fc78b661fb..4c0ea9829d 100644 --- a/src/mainboard/tyan/Makefile.s289x.inc +++ b/src/mainboard/tyan/Makefile.s289x.inc @@ -27,10 +27,10 @@ driver-y += mainboard.o #needed by irq_tables and mptable and acpi_tables obj-y += get_bus_conf.o -obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += dsdt.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += acpi_tables.o +obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += dsdt.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += acpi_tables.o #driver-y += ../../../drivers/i2c/i2cmux/i2cmux.o diff --git a/src/mainboard/tyan/s1846/Config.lb b/src/mainboard/tyan/s1846/Config.lb index 2a5c8b26ec..d98368b1cf 100644 --- a/src/mainboard/tyan/s1846/Config.lb +++ b/src/mainboard/tyan/s1846/Config.lb @@ -25,7 +25,7 @@ default CONFIG_XIP_ROM_BASE = 0xffffffff - CONFIG_XIP_ROM_SIZE + 1 arch i386 end driver mainboard.o -if CONFIG_HAVE_PIRQ_TABLE +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end makerule ./failover.E diff --git a/src/mainboard/tyan/s1846/Options.lb b/src/mainboard/tyan/s1846/Options.lb index 6a56131e91..bf30506261 100644 --- a/src/mainboard/tyan/s1846/Options.lb +++ b/src/mainboard/tyan/s1846/Options.lb @@ -18,8 +18,8 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -45,7 +45,7 @@ uses CONFIG_ROMBASE uses CONFIG_RAMBASE uses CONFIG_XIP_ROM_SIZE uses CONFIG_XIP_ROM_BASE -uses CONFIG_HAVE_MP_TABLE +uses CONFIG_GENERATE_MP_TABLE uses CONFIG_CROSS_COMPILE uses CC uses HOSTCC @@ -65,11 +65,11 @@ uses CONFIG_PCI_ROM_RUN default CONFIG_ROM_SIZE = 256 * 1024 default CONFIG_HAVE_FALLBACK_BOOT = 1 -default CONFIG_HAVE_MP_TABLE = 0 +default CONFIG_GENERATE_MP_TABLE = 0 default CONFIG_HAVE_HARD_RESET = 0 default CONFIG_UDELAY_TSC = 1 default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1 -default CONFIG_HAVE_PIRQ_TABLE = 0 +default CONFIG_GENERATE_PIRQ_TABLE = 0 default CONFIG_MAINBOARD_VENDOR = "N/A" # Override this in targets/*/Config.lb. default CONFIG_MAINBOARD_PART_NUMBER = "N/A" # Override this in targets/*/Config.lb. default CONFIG_ROM_IMAGE_SIZE = 36 * 1024 diff --git a/src/mainboard/tyan/s2735/Config.lb b/src/mainboard/tyan/s2735/Config.lb index 9cc0bc3aea..c15d0917a3 100644 --- a/src/mainboard/tyan/s2735/Config.lb +++ b/src/mainboard/tyan/s2735/Config.lb @@ -10,8 +10,8 @@ arch i386 end ## driver mainboard.o -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end object reset.o if CONFIG_USE_INIT diff --git a/src/mainboard/tyan/s2735/Kconfig b/src/mainboard/tyan/s2735/Kconfig index e39c5ea98a..33107762f8 100644 --- a/src/mainboard/tyan/s2735/Kconfig +++ b/src/mainboard/tyan/s2735/Kconfig @@ -7,6 +7,7 @@ config BOARD_TYAN_S2735 select SOUTHBRIDGE_INTEL_I82801ER select SUPERIO_WINBOND_W83627HF select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE select UDELAY_TSC select HAVE_OPTION_TABLE select USE_DCACHE_RAM diff --git a/src/mainboard/tyan/s2735/Makefile.inc b/src/mainboard/tyan/s2735/Makefile.inc index 0d3f8965e8..3b05dac815 100644 --- a/src/mainboard/tyan/s2735/Makefile.inc +++ b/src/mainboard/tyan/s2735/Makefile.inc @@ -25,8 +25,8 @@ driver-y += mainboard.o -obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o #driver-y += ../../../drivers/i2c/i2cmux/i2cmux.o diff --git a/src/mainboard/tyan/s2735/Options.lb b/src/mainboard/tyan/s2735/Options.lb index 55c625ab4f..61933d2233 100644 --- a/src/mainboard/tyan/s2735/Options.lb +++ b/src/mainboard/tyan/s2735/Options.lb @@ -1,5 +1,5 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -97,14 +97,14 @@ default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=15 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ## Build code to export a CMOS option table diff --git a/src/mainboard/tyan/s2850/Config.lb b/src/mainboard/tyan/s2850/Config.lb index 59dcd8e557..19f637fd29 100644 --- a/src/mainboard/tyan/s2850/Config.lb +++ b/src/mainboard/tyan/s2850/Config.lb @@ -12,8 +12,8 @@ driver mainboard.o #dir /drivers/si/3114 -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end if CONFIG_USE_INIT diff --git a/src/mainboard/tyan/s2850/Kconfig b/src/mainboard/tyan/s2850/Kconfig index 6103be8826..bb36edc650 100644 --- a/src/mainboard/tyan/s2850/Kconfig +++ b/src/mainboard/tyan/s2850/Kconfig @@ -7,7 +7,8 @@ config BOARD_TYAN_S2850 select NORTHBRIDGE_AMD_AMDK8_ROOT_COMPLEX select SOUTHBRIDGE_AMD_AMD8111 select SUPERIO_WINBOND_W83627HF - select PIRQ_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE config MAINBOARD_DIR string diff --git a/src/mainboard/tyan/s2850/Options.lb b/src/mainboard/tyan/s2850/Options.lb index 41590cc3e9..a53d5b7272 100644 --- a/src/mainboard/tyan/s2850/Options.lb +++ b/src/mainboard/tyan/s2850/Options.lb @@ -1,5 +1,5 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -86,14 +86,14 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=12 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ## Build code to export a CMOS option table diff --git a/src/mainboard/tyan/s2875/Config.lb b/src/mainboard/tyan/s2875/Config.lb index 73481883f8..63ea6be2cb 100644 --- a/src/mainboard/tyan/s2875/Config.lb +++ b/src/mainboard/tyan/s2875/Config.lb @@ -12,8 +12,8 @@ driver mainboard.o #dir /drivers/si/3114 -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end if CONFIG_USE_INIT diff --git a/src/mainboard/tyan/s2875/Kconfig b/src/mainboard/tyan/s2875/Kconfig index 0e04059031..15fb3c6d74 100644 --- a/src/mainboard/tyan/s2875/Kconfig +++ b/src/mainboard/tyan/s2875/Kconfig @@ -8,7 +8,8 @@ config BOARD_TYAN_S2875 select SOUTHBRIDGE_AMD_AMD8151 select SOUTHBRIDGE_AMD_AMD8111 select SUPERIO_WINBOND_W83627HF - select PIRQ_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE config MAINBOARD_DIR string diff --git a/src/mainboard/tyan/s2875/Options.lb b/src/mainboard/tyan/s2875/Options.lb index df3a035d49..51913e30fb 100644 --- a/src/mainboard/tyan/s2875/Options.lb +++ b/src/mainboard/tyan/s2875/Options.lb @@ -1,5 +1,5 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -87,14 +87,14 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=13 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ## Build code to export a CMOS option table diff --git a/src/mainboard/tyan/s2880/Config.lb b/src/mainboard/tyan/s2880/Config.lb index 3ca46b67bb..692184b18e 100644 --- a/src/mainboard/tyan/s2880/Config.lb +++ b/src/mainboard/tyan/s2880/Config.lb @@ -12,8 +12,8 @@ driver mainboard.o #dir /drivers/si/3114 -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end if CONFIG_USE_INIT diff --git a/src/mainboard/tyan/s2880/Kconfig b/src/mainboard/tyan/s2880/Kconfig index 01fbdf8340..0caae162d1 100644 --- a/src/mainboard/tyan/s2880/Kconfig +++ b/src/mainboard/tyan/s2880/Kconfig @@ -8,7 +8,8 @@ config BOARD_TYAN_S2880 select SOUTHBRIDGE_AMD_AMD8131 select SOUTHBRIDGE_AMD_AMD8111 select SUPERIO_WINBOND_W83627HF - select PIRQ_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE select SERIAL_CPU_INIT select AP_CODE_IN_CAR diff --git a/src/mainboard/tyan/s2880/Makefile.inc b/src/mainboard/tyan/s2880/Makefile.inc index d6fcb7b33a..9398e1912c 100644 --- a/src/mainboard/tyan/s2880/Makefile.inc +++ b/src/mainboard/tyan/s2880/Makefile.inc @@ -26,10 +26,10 @@ driver-y += mainboard.o #needed by irq_tables and mptable and acpi_tables -obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += dsdt.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += acpi_tables.o +obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += dsdt.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += acpi_tables.o #driver-y += ../../../drivers/i2c/i2cmux/i2cmux.o diff --git a/src/mainboard/tyan/s2880/Options.lb b/src/mainboard/tyan/s2880/Options.lb index 4255614e97..c41e03f356 100644 --- a/src/mainboard/tyan/s2880/Options.lb +++ b/src/mainboard/tyan/s2880/Options.lb @@ -1,5 +1,5 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -86,14 +86,14 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=13 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ## Build code to export a CMOS option table diff --git a/src/mainboard/tyan/s2881/Config.lb b/src/mainboard/tyan/s2881/Config.lb index 6480067300..92f50f8eff 100644 --- a/src/mainboard/tyan/s2881/Config.lb +++ b/src/mainboard/tyan/s2881/Config.lb @@ -12,8 +12,8 @@ driver mainboard.o #dir /drivers/si/3114 object get_bus_conf.o -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end if CONFIG_USE_INIT diff --git a/src/mainboard/tyan/s2881/Kconfig b/src/mainboard/tyan/s2881/Kconfig index cf236b3034..1a2bb09a36 100644 --- a/src/mainboard/tyan/s2881/Kconfig +++ b/src/mainboard/tyan/s2881/Kconfig @@ -8,7 +8,8 @@ config BOARD_TYAN_S2881 select SOUTHBRIDGE_AMD_AMD8131 select SOUTHBRIDGE_AMD_AMD8111 select SUPERIO_WINBOND_W83627HF - select PIRQ_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE select SERIAL_CPU_INIT select AP_CODE_IN_CAR diff --git a/src/mainboard/tyan/s2881/Options.lb b/src/mainboard/tyan/s2881/Options.lb index c65ef5f2fe..cde6d5adf1 100644 --- a/src/mainboard/tyan/s2881/Options.lb +++ b/src/mainboard/tyan/s2881/Options.lb @@ -1,5 +1,5 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -91,14 +91,14 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=9 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ## Build code to export a CMOS option table diff --git a/src/mainboard/tyan/s2882/Config.lb b/src/mainboard/tyan/s2882/Config.lb index 687169622a..34b2e82a74 100644 --- a/src/mainboard/tyan/s2882/Config.lb +++ b/src/mainboard/tyan/s2882/Config.lb @@ -12,8 +12,8 @@ driver mainboard.o #dir /drivers/si/3114 -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end if CONFIG_USE_INIT diff --git a/src/mainboard/tyan/s2882/Kconfig b/src/mainboard/tyan/s2882/Kconfig index db8e17c79d..84c9a75b72 100644 --- a/src/mainboard/tyan/s2882/Kconfig +++ b/src/mainboard/tyan/s2882/Kconfig @@ -8,7 +8,8 @@ config BOARD_TYAN_S2882 select SOUTHBRIDGE_AMD_AMD8131 select SOUTHBRIDGE_AMD_AMD8111 select SUPERIO_WINBOND_W83627HF - select PIRQ_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE select SERIAL_CPU_INIT select AP_CODE_IN_CAR diff --git a/src/mainboard/tyan/s2882/Makefile.inc b/src/mainboard/tyan/s2882/Makefile.inc index d6fcb7b33a..9398e1912c 100644 --- a/src/mainboard/tyan/s2882/Makefile.inc +++ b/src/mainboard/tyan/s2882/Makefile.inc @@ -26,10 +26,10 @@ driver-y += mainboard.o #needed by irq_tables and mptable and acpi_tables -obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += dsdt.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += acpi_tables.o +obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += dsdt.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += acpi_tables.o #driver-y += ../../../drivers/i2c/i2cmux/i2cmux.o diff --git a/src/mainboard/tyan/s2882/Options.lb b/src/mainboard/tyan/s2882/Options.lb index b17bc6b9c0..d4ff6fef88 100644 --- a/src/mainboard/tyan/s2882/Options.lb +++ b/src/mainboard/tyan/s2882/Options.lb @@ -1,5 +1,5 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -86,14 +86,14 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=15 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ## Build code to export a CMOS option table diff --git a/src/mainboard/tyan/s2885/Config.lb b/src/mainboard/tyan/s2885/Config.lb index 74f9c53e65..012b09774b 100644 --- a/src/mainboard/tyan/s2885/Config.lb +++ b/src/mainboard/tyan/s2885/Config.lb @@ -12,8 +12,8 @@ driver mainboard.o #dir /drivers/si/3114 object get_bus_conf.o -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end if CONFIG_USE_INIT diff --git a/src/mainboard/tyan/s2885/Kconfig b/src/mainboard/tyan/s2885/Kconfig index 89a86a9b06..1f868bc645 100644 --- a/src/mainboard/tyan/s2885/Kconfig +++ b/src/mainboard/tyan/s2885/Kconfig @@ -8,7 +8,8 @@ config BOARD_TYAN_S2885 select SOUTHBRIDGE_AMD_AMD8131 select SOUTHBRIDGE_AMD_AMD8111 select SUPERIO_WINBOND_W83627HF - select PIRQ_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE select SERIAL_CPU_INIT select AP_CODE_IN_CAR diff --git a/src/mainboard/tyan/s2885/Options.lb b/src/mainboard/tyan/s2885/Options.lb index cacfc725ea..df76f5c93c 100644 --- a/src/mainboard/tyan/s2885/Options.lb +++ b/src/mainboard/tyan/s2885/Options.lb @@ -1,5 +1,5 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -97,14 +97,14 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=11 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ## Build code to export a CMOS option table diff --git a/src/mainboard/tyan/s2891/Config.lb b/src/mainboard/tyan/s2891/Config.lb index 2266929db5..3f051a0da4 100644 --- a/src/mainboard/tyan/s2891/Config.lb +++ b/src/mainboard/tyan/s2891/Config.lb @@ -16,11 +16,11 @@ driver mainboard.o #needed by irq_tables and mptable and acpi_tables object get_bus_conf.o -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end #object reset.o -if CONFIG_HAVE_ACPI_TABLES +if CONFIG_GENERATE_ACPI_TABLES object acpi_tables.o makerule dsdt.c depends "$(CONFIG_MAINBOARD)/dsdt.dsl" diff --git a/src/mainboard/tyan/s2891/Kconfig b/src/mainboard/tyan/s2891/Kconfig index 98defd5d41..535b0f23f4 100644 --- a/src/mainboard/tyan/s2891/Kconfig +++ b/src/mainboard/tyan/s2891/Kconfig @@ -8,7 +8,8 @@ config BOARD_TYAN_S2891 select SOUTHBRIDGE_NVIDIA_CK804 select SOUTHBRIDGE_AMD_AMD8131 select SUPERIO_WINBOND_W83627HF - select PIRQ_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE select SERIAL_CPU_INIT select AP_CODE_IN_CAR select HAVE_ACPI_TABLES diff --git a/src/mainboard/tyan/s2891/Options.lb b/src/mainboard/tyan/s2891/Options.lb index 9822e394d6..08a1a081f1 100644 --- a/src/mainboard/tyan/s2891/Options.lb +++ b/src/mainboard/tyan/s2891/Options.lb @@ -1,5 +1,5 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -28,7 +28,7 @@ uses CONFIG_USE_OPTION_TABLE uses CONFIG_LB_CKS_RANGE_START uses CONFIG_LB_CKS_RANGE_END uses CONFIG_LB_CKS_LOC -uses CONFIG_HAVE_ACPI_TABLES +uses CONFIG_GENERATE_ACPI_TABLES uses CONFIG_HAVE_ACPI_RESUME uses CONFIG_HAVE_LOW_TABLES uses CONFIG_MULTIBOOT @@ -109,19 +109,19 @@ default CONFIG_HAVE_SMI_HANDLER=0 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=11 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ## Build code to provide ACPI support ## -default CONFIG_HAVE_ACPI_TABLES=1 +default CONFIG_GENERATE_ACPI_TABLES=1 default CONFIG_HAVE_LOW_TABLES=1 default CONFIG_MULTIBOOT=0 diff --git a/src/mainboard/tyan/s2892/Config.lb b/src/mainboard/tyan/s2892/Config.lb index 3779de2849..9dcb7dae55 100644 --- a/src/mainboard/tyan/s2892/Config.lb +++ b/src/mainboard/tyan/s2892/Config.lb @@ -17,11 +17,11 @@ driver mainboard.o #needed by irq_tables and mptable and acpi_tables object get_bus_conf.o -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end #object reset.o -if CONFIG_HAVE_ACPI_TABLES +if CONFIG_GENERATE_ACPI_TABLES object acpi_tables.o makerule dsdt.c depends "$(CONFIG_MAINBOARD)/dsdt.dsl" diff --git a/src/mainboard/tyan/s2892/Kconfig b/src/mainboard/tyan/s2892/Kconfig index 72986e57ec..421dc2e937 100644 --- a/src/mainboard/tyan/s2892/Kconfig +++ b/src/mainboard/tyan/s2892/Kconfig @@ -8,7 +8,8 @@ config BOARD_TYAN_S2892 select SOUTHBRIDGE_NVIDIA_CK804 select SOUTHBRIDGE_AMD_AMD8131 select SUPERIO_WINBOND_W83627HF - select PIRQ_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE select SERIAL_CPU_INIT select AP_CODE_IN_CAR select HAVE_ACPI_TABLES diff --git a/src/mainboard/tyan/s2892/Options.lb b/src/mainboard/tyan/s2892/Options.lb index 5079f543e1..4ec42e5932 100644 --- a/src/mainboard/tyan/s2892/Options.lb +++ b/src/mainboard/tyan/s2892/Options.lb @@ -1,5 +1,5 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -28,7 +28,7 @@ uses CONFIG_USE_OPTION_TABLE uses CONFIG_LB_CKS_RANGE_START uses CONFIG_LB_CKS_RANGE_END uses CONFIG_LB_CKS_LOC -uses CONFIG_HAVE_ACPI_TABLES +uses CONFIG_GENERATE_ACPI_TABLES uses CONFIG_HAVE_ACPI_RESUME uses CONFIG_HAVE_LOW_TABLES uses CONFIG_MULTIBOOT @@ -103,19 +103,19 @@ default CONFIG_HAVE_SMI_HANDLER=0 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=11 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ## Build code to provide ACPI support ## -default CONFIG_HAVE_ACPI_TABLES=1 +default CONFIG_GENERATE_ACPI_TABLES=1 default CONFIG_HAVE_LOW_TABLES=1 default CONFIG_MULTIBOOT=0 diff --git a/src/mainboard/tyan/s2895/Config.lb b/src/mainboard/tyan/s2895/Config.lb index 911e279383..c4f24f4e8d 100644 --- a/src/mainboard/tyan/s2895/Config.lb +++ b/src/mainboard/tyan/s2895/Config.lb @@ -12,11 +12,11 @@ driver mainboard.o #needed by irq_tables and mptable and acpi_tables object get_bus_conf.o -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end #object reset.o -if CONFIG_HAVE_ACPI_TABLES +if CONFIG_GENERATE_ACPI_TABLES object acpi_tables.o makerule dsdt.c depends "$(CONFIG_MAINBOARD)/dsdt.dsl" diff --git a/src/mainboard/tyan/s2895/Kconfig b/src/mainboard/tyan/s2895/Kconfig index e34ed1d3d9..12427418be 100644 --- a/src/mainboard/tyan/s2895/Kconfig +++ b/src/mainboard/tyan/s2895/Kconfig @@ -8,7 +8,8 @@ config BOARD_TYAN_S2895 select SOUTHBRIDGE_NVIDIA_CK804 select SOUTHBRIDGE_AMD_AMD8131 select SUPERIO_SMSC_LPC47B397 - select PIRQ_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE select SERIAL_CPU_INIT select AP_CODE_IN_CAR select HAVE_ACPI_TABLES diff --git a/src/mainboard/tyan/s2895/Options.lb b/src/mainboard/tyan/s2895/Options.lb index 499f269c19..de9e136f2d 100644 --- a/src/mainboard/tyan/s2895/Options.lb +++ b/src/mainboard/tyan/s2895/Options.lb @@ -1,5 +1,5 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_USE_FAILOVER_IMAGE @@ -31,7 +31,7 @@ uses CONFIG_USE_OPTION_TABLE uses CONFIG_LB_CKS_RANGE_START uses CONFIG_LB_CKS_RANGE_END uses CONFIG_LB_CKS_LOC -uses CONFIG_HAVE_ACPI_TABLES +uses CONFIG_GENERATE_ACPI_TABLES uses CONFIG_HAVE_ACPI_RESUME uses CONFIG_HAVE_LOW_TABLES uses CONFIG_MULTIBOOT @@ -116,19 +116,19 @@ default CONFIG_HAVE_SMI_HANDLER=0 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=11 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ## Build code to provide ACPI support ## -default CONFIG_HAVE_ACPI_TABLES=1 +default CONFIG_GENERATE_ACPI_TABLES=1 default CONFIG_HAVE_LOW_TABLES=1 default CONFIG_MULTIBOOT=0 diff --git a/src/mainboard/tyan/s2912/Config.lb b/src/mainboard/tyan/s2912/Config.lb index c8f3a8f041..a52a70b235 100644 --- a/src/mainboard/tyan/s2912/Config.lb +++ b/src/mainboard/tyan/s2912/Config.lb @@ -33,8 +33,8 @@ driver mainboard.o #needed by irq_tables and mptable and acpi_tables object get_bus_conf.o -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end #object reset.o if CONFIG_USE_INIT diff --git a/src/mainboard/tyan/s2912/Kconfig b/src/mainboard/tyan/s2912/Kconfig index ff05979f74..f85fc02f79 100644 --- a/src/mainboard/tyan/s2912/Kconfig +++ b/src/mainboard/tyan/s2912/Kconfig @@ -8,11 +8,11 @@ config BOARD_TYAN_S2912 select NORTHBRIDGE_AMD_AMDK8_ROOT_COMPLEX select SOUTHBRIDGE_NVIDIA_MCP55 select SUPERIO_WINBOND_W83627HF - select PIRQ_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE select USE_PRINTK_IN_CAR select USE_DCACHE_RAM select HAVE_HARD_RESET - select HAVE_HIGH_TABLES select IOAPIC select MEM_TRAIN_SEQ select SB_HT_CHAIN_UNITID_OFFSET_ONLY diff --git a/src/mainboard/tyan/s2912/Makefile.inc b/src/mainboard/tyan/s2912/Makefile.inc index 83271c2a4c..acfa14f2e4 100644 --- a/src/mainboard/tyan/s2912/Makefile.inc +++ b/src/mainboard/tyan/s2912/Makefile.inc @@ -23,8 +23,8 @@ driver-y += mainboard.o #needed by irq_tables and mptable and acpi_tables obj-y += get_bus_conf.o -obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o obj-$(CONFIG_USE_INIT) += cache_as_ram_auto.o obj-$(CONFIG_AP_CODE_IN_CAR) += apc_auto.o diff --git a/src/mainboard/tyan/s2912/Options.lb b/src/mainboard/tyan/s2912/Options.lb index 83c7424a94..439c6cf3eb 100644 --- a/src/mainboard/tyan/s2912/Options.lb +++ b/src/mainboard/tyan/s2912/Options.lb @@ -19,9 +19,9 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE -uses CONFIG_HAVE_ACPI_TABLES +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE +uses CONFIG_GENERATE_ACPI_TABLES uses CONFIG_HAVE_ACPI_RESUME uses CONFIG_ACPI_SSDTX_NUM uses CONFIG_USE_FALLBACK_IMAGE @@ -149,17 +149,17 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=11 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ACPI tables will be included -default CONFIG_HAVE_ACPI_TABLES=0 +default CONFIG_GENERATE_ACPI_TABLES=0 ## extra SSDT num default CONFIG_ACPI_SSDTX_NUM=3 diff --git a/src/mainboard/tyan/s2912_fam10/Config.lb b/src/mainboard/tyan/s2912_fam10/Config.lb index be6662f889..84f6d1cde5 100644 --- a/src/mainboard/tyan/s2912_fam10/Config.lb +++ b/src/mainboard/tyan/s2912_fam10/Config.lb @@ -33,8 +33,8 @@ driver mainboard.o #needed by irq_tables and mptable and acpi_tables object get_bus_conf.o -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end #object reset.o if CONFIG_USE_INIT diff --git a/src/mainboard/tyan/s2912_fam10/Kconfig b/src/mainboard/tyan/s2912_fam10/Kconfig index 9b1eb2a7fa..c2e22024c8 100644 --- a/src/mainboard/tyan/s2912_fam10/Kconfig +++ b/src/mainboard/tyan/s2912_fam10/Kconfig @@ -8,7 +8,8 @@ config BOARD_TYAN_S2912_FAM10 select NORTHBRIDGE_AMD_AMDFAM10_ROOT_COMPLEX select SOUTHBRIDGE_NVIDIA_MCP55 select SUPERIO_WINBOND_W83627HF - select PIRQ_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE select USE_PRINTK_IN_CAR select USE_DCACHE_RAM select HAVE_HARD_RESET diff --git a/src/mainboard/tyan/s2912_fam10/Makefile.inc b/src/mainboard/tyan/s2912_fam10/Makefile.inc index 83271c2a4c..acfa14f2e4 100644 --- a/src/mainboard/tyan/s2912_fam10/Makefile.inc +++ b/src/mainboard/tyan/s2912_fam10/Makefile.inc @@ -23,8 +23,8 @@ driver-y += mainboard.o #needed by irq_tables and mptable and acpi_tables obj-y += get_bus_conf.o -obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o obj-$(CONFIG_USE_INIT) += cache_as_ram_auto.o obj-$(CONFIG_AP_CODE_IN_CAR) += apc_auto.o diff --git a/src/mainboard/tyan/s2912_fam10/Options.lb b/src/mainboard/tyan/s2912_fam10/Options.lb index 3c7cc8487d..61c647cb86 100644 --- a/src/mainboard/tyan/s2912_fam10/Options.lb +++ b/src/mainboard/tyan/s2912_fam10/Options.lb @@ -19,9 +19,9 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE -uses CONFIG_HAVE_ACPI_TABLES +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE +uses CONFIG_GENERATE_ACPI_TABLES uses CONFIG_HAVE_ACPI_RESUME uses CONFIG_ACPI_SSDTX_NUM uses CONFIG_USE_FALLBACK_IMAGE @@ -151,17 +151,17 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=11 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ACPI tables will be included -default CONFIG_HAVE_ACPI_TABLES=0 +default CONFIG_GENERATE_ACPI_TABLES=0 ## extra SSDT num default CONFIG_ACPI_SSDTX_NUM=31 diff --git a/src/mainboard/tyan/s4880/Config.lb b/src/mainboard/tyan/s4880/Config.lb index c85db4b9b2..1838733d7c 100644 --- a/src/mainboard/tyan/s4880/Config.lb +++ b/src/mainboard/tyan/s4880/Config.lb @@ -11,8 +11,8 @@ arch i386 end ## driver mainboard.o -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end if CONFIG_USE_INIT diff --git a/src/mainboard/tyan/s4880/Kconfig b/src/mainboard/tyan/s4880/Kconfig index 1a0c9fe4d7..bc68364a1f 100644 --- a/src/mainboard/tyan/s4880/Kconfig +++ b/src/mainboard/tyan/s4880/Kconfig @@ -9,6 +9,7 @@ config BOARD_TYAN_S4880 select SOUTHBRIDGE_AMD_AMD8131 select SUPERIO_WINBOND_W83627HF select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE select USE_PRINTK_IN_CAR select USE_DCACHE_RAM select HAVE_HARD_RESET diff --git a/src/mainboard/tyan/s4880/Makefile.inc b/src/mainboard/tyan/s4880/Makefile.inc index 86d71e152b..c382cc681d 100644 --- a/src/mainboard/tyan/s4880/Makefile.inc +++ b/src/mainboard/tyan/s4880/Makefile.inc @@ -21,8 +21,8 @@ driver-y += mainboard.o -obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o # This is part of the conversion to init-obj and away from included code. diff --git a/src/mainboard/tyan/s4880/Options.lb b/src/mainboard/tyan/s4880/Options.lb index a238c0aac1..05490b785f 100644 --- a/src/mainboard/tyan/s4880/Options.lb +++ b/src/mainboard/tyan/s4880/Options.lb @@ -1,5 +1,5 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -90,14 +90,14 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=22 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ## Build code to export a CMOS option table diff --git a/src/mainboard/tyan/s4882/Config.lb b/src/mainboard/tyan/s4882/Config.lb index 7da0a6773a..f28c752078 100644 --- a/src/mainboard/tyan/s4882/Config.lb +++ b/src/mainboard/tyan/s4882/Config.lb @@ -11,8 +11,8 @@ arch i386 end ## driver mainboard.o -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end if CONFIG_USE_INIT diff --git a/src/mainboard/tyan/s4882/Kconfig b/src/mainboard/tyan/s4882/Kconfig index af52ebd9a8..fc67007d78 100644 --- a/src/mainboard/tyan/s4882/Kconfig +++ b/src/mainboard/tyan/s4882/Kconfig @@ -9,6 +9,7 @@ config BOARD_TYAN_S4882 select SOUTHBRIDGE_AMD_AMD8131 select SUPERIO_WINBOND_W83627HF select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE select USE_PRINTK_IN_CAR select USE_DCACHE_RAM select HAVE_HARD_RESET diff --git a/src/mainboard/tyan/s4882/Makefile.inc b/src/mainboard/tyan/s4882/Makefile.inc index 86d71e152b..c382cc681d 100644 --- a/src/mainboard/tyan/s4882/Makefile.inc +++ b/src/mainboard/tyan/s4882/Makefile.inc @@ -21,8 +21,8 @@ driver-y += mainboard.o -obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o # This is part of the conversion to init-obj and away from included code. diff --git a/src/mainboard/tyan/s4882/Options.lb b/src/mainboard/tyan/s4882/Options.lb index 169b85c755..820fc3be2f 100644 --- a/src/mainboard/tyan/s4882/Options.lb +++ b/src/mainboard/tyan/s4882/Options.lb @@ -1,5 +1,5 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -90,14 +90,14 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=22 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ## Build code to export a CMOS option table diff --git a/src/mainboard/via/epia-cn/Config.lb b/src/mainboard/via/epia-cn/Config.lb index 5e3149eb7e..dbb9c32e6b 100644 --- a/src/mainboard/via/epia-cn/Config.lb +++ b/src/mainboard/via/epia-cn/Config.lb @@ -25,9 +25,9 @@ include /config/nofailovercalculation.lb arch i386 end driver mainboard.o -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_ACPI_TABLES +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_ACPI_TABLES object fadt.o object dsdt.o object acpi_tables.o diff --git a/src/mainboard/via/epia-cn/Makefile.inc b/src/mainboard/via/epia-cn/Makefile.inc index eb24017e8e..61c662d784 100644 --- a/src/mainboard/via/epia-cn/Makefile.inc +++ b/src/mainboard/via/epia-cn/Makefile.inc @@ -21,12 +21,12 @@ initobj-y += crt0.o obj-y += mainboard.o -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o -obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += fadt.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += dsdt.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += acpi_tables.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += fadt.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += dsdt.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += acpi_tables.o ldscript-y += ../../../../src/arch/i386/init/ldscript_fallback_cbfs.lb ldscript-y += ../../../../src/cpu/x86/16bit/entry16.lds diff --git a/src/mainboard/via/epia-cn/Options.lb b/src/mainboard/via/epia-cn/Options.lb index 427f438eff..700de54a8b 100644 --- a/src/mainboard/via/epia-cn/Options.lb +++ b/src/mainboard/via/epia-cn/Options.lb @@ -19,8 +19,8 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -47,8 +47,8 @@ uses CONFIG_ROMBASE uses CONFIG_RAMBASE uses CONFIG_XIP_ROM_SIZE uses CONFIG_XIP_ROM_BASE -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_ACPI_TABLES +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_ACPI_TABLES uses CONFIG_HAVE_ACPI_RESUME uses CONFIG_CROSS_COMPILE uses CC @@ -73,13 +73,13 @@ default CONFIG_CONSOLE_SERIAL8250 = 1 default CONFIG_PCI_ROM_RUN = 0 default CONFIG_CONSOLE_VGA = 0 default CONFIG_HAVE_FALLBACK_BOOT = 1 -default CONFIG_HAVE_MP_TABLE = 0 +default CONFIG_GENERATE_MP_TABLE = 0 default CONFIG_UDELAY_TSC = 1 default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1 default CONFIG_HAVE_HARD_RESET = 0 -default CONFIG_HAVE_PIRQ_TABLE = 1 +default CONFIG_GENERATE_PIRQ_TABLE = 1 default CONFIG_IRQ_SLOT_COUNT = 9 -default CONFIG_HAVE_ACPI_TABLES = 0 +default CONFIG_GENERATE_ACPI_TABLES = 0 default CONFIG_HAVE_OPTION_TABLE = 1 default CONFIG_ROM_IMAGE_SIZE = 64 * 1024 default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE diff --git a/src/mainboard/via/epia-m/Config.lb b/src/mainboard/via/epia-m/Config.lb index a81c758917..5d48aeb620 100644 --- a/src/mainboard/via/epia-m/Config.lb +++ b/src/mainboard/via/epia-m/Config.lb @@ -14,11 +14,11 @@ arch i386 end ## driver mainboard.o -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end #object reset.o object vgabios.o -if CONFIG_HAVE_ACPI_TABLES +if CONFIG_GENERATE_ACPI_TABLES object fadt.o object dsdt.o object acpi_tables.o diff --git a/src/mainboard/via/epia-m/Makefile.inc b/src/mainboard/via/epia-m/Makefile.inc index b029d1e733..b84a5bc76e 100644 --- a/src/mainboard/via/epia-m/Makefile.inc +++ b/src/mainboard/via/epia-m/Makefile.inc @@ -22,11 +22,11 @@ initobj-y += crt0.o obj-y += mainboard.o obj-y += vgabios.o -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += fadt.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += dsdt.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += acpi_tables.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += fadt.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += dsdt.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += acpi_tables.o ldscript-y += ../../../../src/arch/i386/init/ldscript_fallback_cbfs.lb ldscript-y += ../../../../src/cpu/x86/16bit/entry16.lds diff --git a/src/mainboard/via/epia-m/Options.lb b/src/mainboard/via/epia-m/Options.lb index 91669250fc..901da5b21a 100644 --- a/src/mainboard/via/epia-m/Options.lb +++ b/src/mainboard/via/epia-m/Options.lb @@ -1,5 +1,5 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -27,8 +27,8 @@ uses CONFIG_ROMBASE uses CONFIG_RAMBASE uses CONFIG_XIP_ROM_SIZE uses CONFIG_XIP_ROM_BASE -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_ACPI_TABLES +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_ACPI_TABLES uses CONFIG_HAVE_ACPI_RESUME uses CONFIG_CROSS_COMPILE uses CC @@ -61,7 +61,7 @@ default CONFIG_HAVE_FALLBACK_BOOT=1 ## ## no MP table ## -default CONFIG_HAVE_MP_TABLE=0 +default CONFIG_GENERATE_MP_TABLE=0 ## ## Use TSC for udelay. @@ -77,14 +77,14 @@ default CONFIG_HAVE_HARD_RESET=0 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=5 ## ## Build code to load acpi tables ## -default CONFIG_HAVE_ACPI_TABLES=1 +default CONFIG_GENERATE_ACPI_TABLES=1 ## diff --git a/src/mainboard/via/epia-m700/Config.lb b/src/mainboard/via/epia-m700/Config.lb index 06eb3d0972..edd246aaf4 100644 --- a/src/mainboard/via/epia-m700/Config.lb +++ b/src/mainboard/via/epia-m700/Config.lb @@ -25,9 +25,9 @@ include /config/nofailovercalculation.lb arch i386 end driver mainboard.o driver wakeup.o -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_ACPI_TABLES +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_ACPI_TABLES object fadt.o object dsdt.o # object ssdt.o diff --git a/src/mainboard/via/epia-m700/Kconfig b/src/mainboard/via/epia-m700/Kconfig index e31212c561..0d451c7141 100644 --- a/src/mainboard/via/epia-m700/Kconfig +++ b/src/mainboard/via/epia-m700/Kconfig @@ -4,7 +4,6 @@ config BOARD_VIA_EPIA_M700 select CPU_VIA_C7 select NORTHBRIDGE_VIA_VX800 select SUPERIO_WINBOND_W83697HF - select HAVE_PIRQ_TABLE select HAVE_ACPI_TABLES config MAINBOARD_DIR diff --git a/src/mainboard/via/epia-m700/Makefile.inc b/src/mainboard/via/epia-m700/Makefile.inc index dd8ab50202..e0528f6925 100644 --- a/src/mainboard/via/epia-m700/Makefile.inc +++ b/src/mainboard/via/epia-m700/Makefile.inc @@ -22,12 +22,12 @@ initobj-y += crt0.o obj-y += mainboard.o obj-y += wakeup.o -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o -obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += fadt.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += dsdt.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += acpi_tables.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += fadt.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += dsdt.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += acpi_tables.o ldscript-y += ../../../../src/arch/i386/init/ldscript_fallback_cbfs.lb ldscript-y += ../../../../src/cpu/x86/16bit/entry16.lds diff --git a/src/mainboard/via/epia-m700/Options.lb b/src/mainboard/via/epia-m700/Options.lb index f88cd928f7..5aa8473ec2 100644 --- a/src/mainboard/via/epia-m700/Options.lb +++ b/src/mainboard/via/epia-m700/Options.lb @@ -18,8 +18,8 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -46,8 +46,8 @@ uses CONFIG_ROMBASE uses CONFIG_RAMBASE uses CONFIG_XIP_ROM_SIZE uses CONFIG_XIP_ROM_BASE -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_ACPI_TABLES +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_ACPI_TABLES uses CONFIG_CROSS_COMPILE uses CC uses HOSTCC @@ -112,14 +112,14 @@ default CONFIG_CONSOLE_SERIAL8250 = 1 default CONFIG_PCI_ROM_RUN = 0 default CONFIG_CONSOLE_VGA = 0 default CONFIG_HAVE_FALLBACK_BOOT = 1 -default CONFIG_HAVE_MP_TABLE = 0 +default CONFIG_GENERATE_MP_TABLE = 0 default CONFIG_UDELAY_TSC = 1 default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1 default CONFIG_HAVE_HARD_RESET = 0 # TODO: There is an irq_tables.c file, should it be used? -default CONFIG_HAVE_PIRQ_TABLE = 0 +default CONFIG_GENERATE_PIRQ_TABLE = 0 default CONFIG_IRQ_SLOT_COUNT = 13 -default CONFIG_HAVE_ACPI_TABLES = 1 +default CONFIG_GENERATE_ACPI_TABLES = 1 default CONFIG_HAVE_OPTION_TABLE = 1 default CONFIG_ROM_IMAGE_SIZE = 128 * 1024 default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE diff --git a/src/mainboard/via/epia-m700/acpi_tables.c b/src/mainboard/via/epia-m700/acpi_tables.c index fefe7b6520..298dc19c96 100644 --- a/src/mainboard/via/epia-m700/acpi_tables.c +++ b/src/mainboard/via/epia-m700/acpi_tables.c @@ -43,9 +43,9 @@ extern u8 acpi_sleep_type; /* * These four macros are copied from <arch/smp/mpspec.h>, I have to do this - * since the "default CONFIG_HAVE_MP_TABLE = 0" in Options.lb, and also since + * since the "default CONFIG_GENERATE_MP_TABLE = 0" in Options.lb, and also since * mainboard/via/... have no mptable.c (so that I can not set - * CONFIG_HAVE_MP_TABLE = 1) as many other mainboards. + * CONFIG_GENERATE_MP_TABLE = 1) as many other mainboards. * So I have to copy these four to here. acpi_fill_madt() needs this. */ #define MP_IRQ_POLARITY_HIGH 0x1 diff --git a/src/mainboard/via/epia-n/Config.lb b/src/mainboard/via/epia-n/Config.lb index 473b0d4dc8..7237732aa5 100644 --- a/src/mainboard/via/epia-n/Config.lb +++ b/src/mainboard/via/epia-n/Config.lb @@ -34,13 +34,13 @@ arch i386 end ## driver mainboard.o -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end #object vgabios.o -if CONFIG_HAVE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end -if CONFIG_HAVE_ACPI_TABLES +if CONFIG_GENERATE_ACPI_TABLES #acpi_create_fadt is located in VT8237R code makerule dsdt.c depends "$(CONFIG_MAINBOARD)/dsdt.asl" diff --git a/src/mainboard/via/epia-n/Kconfig b/src/mainboard/via/epia-n/Kconfig index 4087336bc1..26593f183f 100644 --- a/src/mainboard/via/epia-n/Kconfig +++ b/src/mainboard/via/epia-n/Kconfig @@ -6,6 +6,7 @@ config BOARD_VIA_EPIA_N select SOUTHBRIDGE_VIA_VT8237R select SUPERIO_WINBOND_W83697HF select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE select EPIA_VT8237R_INIT select HAVE_ACPI_TABLES diff --git a/src/mainboard/via/epia-n/Makefile.inc b/src/mainboard/via/epia-n/Makefile.inc index a1576c80b3..0b4e3b1775 100644 --- a/src/mainboard/via/epia-n/Makefile.inc +++ b/src/mainboard/via/epia-n/Makefile.inc @@ -21,11 +21,11 @@ initobj-y += crt0.o obj-y += mainboard.o -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o -obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += dsdt.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += acpi_tables.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += dsdt.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += acpi_tables.o ldscript-y += ../../../../src/arch/i386/init/ldscript_fallback_cbfs.lb ldscript-y += ../../../../src/cpu/x86/16bit/entry16.lds diff --git a/src/mainboard/via/epia-n/Options.lb b/src/mainboard/via/epia-n/Options.lb index b1a14df8f6..e9dfad17cd 100644 --- a/src/mainboard/via/epia-n/Options.lb +++ b/src/mainboard/via/epia-n/Options.lb @@ -19,7 +19,7 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_HAVE_FAILOVER_BOOT uses CONFIG_USE_FAILOVER_IMAGE uses CONFIG_USE_FALLBACK_IMAGE @@ -50,8 +50,8 @@ uses CONFIG_RAMBASE uses CONFIG_XIP_ROM_SIZE uses CONFIG_XIP_ROM_BASE uses CONFIG_SMP -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_ACPI_TABLES +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_ACPI_TABLES uses CONFIG_HAVE_ACPI_RESUME uses CONFIG_CROSS_COMPILE uses CC @@ -85,13 +85,13 @@ default CONFIG_HAVE_FAILOVER_BOOT = 0 default CONFIG_USE_FAILOVER_IMAGE = 0 default CONFIG_HAVE_FALLBACK_BOOT = 1 default CONFIG_SMP = 1 -default CONFIG_HAVE_MP_TABLE = 1 +default CONFIG_GENERATE_MP_TABLE = 1 default CONFIG_UDELAY_TSC = 1 default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1 default CONFIG_HAVE_HARD_RESET = 0 -default CONFIG_HAVE_PIRQ_TABLE = 1 +default CONFIG_GENERATE_PIRQ_TABLE = 1 default CONFIG_IRQ_SLOT_COUNT = 7 -default CONFIG_HAVE_ACPI_TABLES = 1 +default CONFIG_GENERATE_ACPI_TABLES = 1 default CONFIG_HAVE_OPTION_TABLE = 1 #default CONFIG_ROM_IMAGE_SIZE = 67 * 1024 default CONFIG_ROM_IMAGE_SIZE = 128 * 1024 diff --git a/src/mainboard/via/epia-n/acpi_tables.c b/src/mainboard/via/epia-n/acpi_tables.c index 57e648f3eb..b5d19c8c20 100644 --- a/src/mainboard/via/epia-n/acpi_tables.c +++ b/src/mainboard/via/epia-n/acpi_tables.c @@ -39,9 +39,9 @@ extern unsigned char AmlCode[]; /* * These four macros are copied from <arch/smp/mpspec.h>, I have to do this - * since the "default CONFIG_HAVE_MP_TABLE = 0" in Options.lb, and also since + * since the "default CONFIG_GENERATE_MP_TABLE = 0" in Options.lb, and also since * mainboard/via/... have no mptable.c (so that I can not set - * CONFIG_HAVE_MP_TABLE = 1) as many other mainboards. + * CONFIG_GENERATE_MP_TABLE = 1) as many other mainboards. * So I have to copy these four to here. acpi_fill_madt() needs this. */ #define MP_IRQ_POLARITY_DEFAULT 0x0 diff --git a/src/mainboard/via/epia/Config.lb b/src/mainboard/via/epia/Config.lb index 40d88f943e..8c339b272f 100644 --- a/src/mainboard/via/epia/Config.lb +++ b/src/mainboard/via/epia/Config.lb @@ -13,7 +13,7 @@ arch i386 end ## driver mainboard.o -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end #object reset.o ## diff --git a/src/mainboard/via/epia/Makefile.inc b/src/mainboard/via/epia/Makefile.inc index cadb476a8a..0b1067d3b1 100644 --- a/src/mainboard/via/epia/Makefile.inc +++ b/src/mainboard/via/epia/Makefile.inc @@ -21,7 +21,7 @@ initobj-y += crt0.o obj-y += mainboard.o -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o ldscript-y += ../../../../src/arch/i386/init/ldscript_fallback_cbfs.lb ldscript-y += ../../../../src/cpu/x86/16bit/entry16.lds diff --git a/src/mainboard/via/epia/Options.lb b/src/mainboard/via/epia/Options.lb index 9dfb2b3e3a..1e0e178f06 100644 --- a/src/mainboard/via/epia/Options.lb +++ b/src/mainboard/via/epia/Options.lb @@ -4,8 +4,8 @@ uses CONFIG_CONSOLE_SERIAL8250 uses CONFIG_TTYS0_BAUD uses CONFIG_TTYS0_BASE uses CONFIG_TTYS0_LCS -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -35,7 +35,7 @@ uses CONFIG_ROMBASE uses CONFIG_RAMBASE uses CONFIG_XIP_ROM_SIZE uses CONFIG_XIP_ROM_BASE -uses CONFIG_HAVE_MP_TABLE +uses CONFIG_GENERATE_MP_TABLE uses CONFIG_CROSS_COMPILE uses CC uses HOSTCC @@ -75,7 +75,7 @@ default CONFIG_HAVE_FALLBACK_BOOT=1 ## ## no MP table ## -default CONFIG_HAVE_MP_TABLE=0 +default CONFIG_GENERATE_MP_TABLE=0 ## ## Build code to reset the motherboard from coreboot @@ -93,7 +93,7 @@ default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=0 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=5 #object irq_tables.o diff --git a/src/mainboard/via/pc2500e/Config.lb b/src/mainboard/via/pc2500e/Config.lb index 93ea99b489..09e3419b74 100644 --- a/src/mainboard/via/pc2500e/Config.lb +++ b/src/mainboard/via/pc2500e/Config.lb @@ -24,9 +24,9 @@ include /config/nofailovercalculation.lb arch i386 end driver mainboard.o -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_ACPI_TABLES +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_ACPI_TABLES object fadt.o object dsdt.o object acpi_tables.o diff --git a/src/mainboard/via/pc2500e/Kconfig b/src/mainboard/via/pc2500e/Kconfig index 475386f423..b0e18d2c4e 100644 --- a/src/mainboard/via/pc2500e/Kconfig +++ b/src/mainboard/via/pc2500e/Kconfig @@ -6,6 +6,7 @@ config BOARD_VIA_PC2500E select SOUTHBRIDGE_VIA_VT8237R select SUPERIO_ITE_IT8716F select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE config MAINBOARD_DIR string diff --git a/src/mainboard/via/pc2500e/Makefile.inc b/src/mainboard/via/pc2500e/Makefile.inc index eb24017e8e..61c662d784 100644 --- a/src/mainboard/via/pc2500e/Makefile.inc +++ b/src/mainboard/via/pc2500e/Makefile.inc @@ -21,12 +21,12 @@ initobj-y += crt0.o obj-y += mainboard.o -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o -obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += fadt.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += dsdt.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += acpi_tables.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += fadt.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += dsdt.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += acpi_tables.o ldscript-y += ../../../../src/arch/i386/init/ldscript_fallback_cbfs.lb ldscript-y += ../../../../src/cpu/x86/16bit/entry16.lds diff --git a/src/mainboard/via/pc2500e/Options.lb b/src/mainboard/via/pc2500e/Options.lb index 75dbecbd01..c71e792e24 100644 --- a/src/mainboard/via/pc2500e/Options.lb +++ b/src/mainboard/via/pc2500e/Options.lb @@ -19,8 +19,8 @@ ## uses CONFIG_SMP -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -48,8 +48,8 @@ uses CONFIG_ROMBASE uses CONFIG_RAMBASE uses CONFIG_XIP_ROM_SIZE uses CONFIG_XIP_ROM_BASE -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_ACPI_TABLES +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_ACPI_TABLES uses CONFIG_HAVE_ACPI_RESUME uses CONFIG_CROSS_COMPILE uses CC @@ -79,13 +79,13 @@ default CONFIG_PCI_ROM_RUN = 0 default CONFIG_CONSOLE_VGA = 0 default CONFIG_HAVE_FALLBACK_BOOT = 1 default CONFIG_SMP = 1 -default CONFIG_HAVE_MP_TABLE = 1 +default CONFIG_GENERATE_MP_TABLE = 1 default CONFIG_UDELAY_TSC = 1 default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1 default CONFIG_HAVE_HARD_RESET = 0 -default CONFIG_HAVE_PIRQ_TABLE = 1 +default CONFIG_GENERATE_PIRQ_TABLE = 1 default CONFIG_IRQ_SLOT_COUNT = 10 -default CONFIG_HAVE_ACPI_TABLES = 0 +default CONFIG_GENERATE_ACPI_TABLES = 0 default CONFIG_HAVE_OPTION_TABLE = 1 default CONFIG_USE_FALLBACK_IMAGE = 1 default CONFIG_MAINBOARD_VENDOR = "VIA" diff --git a/src/mainboard/via/vt8454c/Config.lb b/src/mainboard/via/vt8454c/Config.lb index 9860ba6676..ab4fc3cdbb 100644 --- a/src/mainboard/via/vt8454c/Config.lb +++ b/src/mainboard/via/vt8454c/Config.lb @@ -35,15 +35,15 @@ arch i386 end driver mainboard.o -if CONFIG_HAVE_MP_TABLE +if CONFIG_GENERATE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end -if CONFIG_HAVE_ACPI_TABLES +if CONFIG_GENERATE_ACPI_TABLES object fadt.o object acpi_tables.o makerule dsdt.c diff --git a/src/mainboard/via/vt8454c/Kconfig b/src/mainboard/via/vt8454c/Kconfig index 2f44226910..ca3650d39d 100644 --- a/src/mainboard/via/vt8454c/Kconfig +++ b/src/mainboard/via/vt8454c/Kconfig @@ -6,6 +6,7 @@ config BOARD_VIA_VT8454C # select SOUTHBRIDGE_INTEL_I82801GX select SUPERIO_VIA_VT1211 select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE # select MMCONF_SUPPORT select USE_PRINTK_IN_CAR select HAVE_ACPI_TABLES diff --git a/src/mainboard/via/vt8454c/Makefile.inc b/src/mainboard/via/vt8454c/Makefile.inc index f33336bd6c..318d81fe0b 100644 --- a/src/mainboard/via/vt8454c/Makefile.inc +++ b/src/mainboard/via/vt8454c/Makefile.inc @@ -19,11 +19,11 @@ driver-y += mainboard.o -obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += dsdt.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += acpi_tables.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += fadt.o +obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += dsdt.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += acpi_tables.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += fadt.o initobj-y += crt0.o # FIXME in $(top)/Makefile diff --git a/src/mainboard/via/vt8454c/Options.lb b/src/mainboard/via/vt8454c/Options.lb index 310235ae7b..0d84d5f357 100644 --- a/src/mainboard/via/vt8454c/Options.lb +++ b/src/mainboard/via/vt8454c/Options.lb @@ -19,10 +19,10 @@ ## MA 02110-1301 USA ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_IRQ_SLOT_COUNT -uses CONFIG_HAVE_ACPI_TABLES +uses CONFIG_GENERATE_ACPI_TABLES uses CONFIG_HAVE_OPTION_TABLE uses CONFIG_USE_OPTION_TABLE uses CONFIG_HAVE_LOW_TABLES @@ -118,19 +118,19 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=15 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ## Build code to load acpi tables ## -default CONFIG_HAVE_ACPI_TABLES=1 +default CONFIG_GENERATE_ACPI_TABLES=1 ## ## Build code to export a CMOS option table |