diff options
Diffstat (limited to 'src/mainboard')
3 files changed, 227 insertions, 12 deletions
diff --git a/src/mainboard/google/volteer/variants/halvor/gpio.c b/src/mainboard/google/volteer/variants/halvor/gpio.c index a54aeca16a..2a986882e6 100644 --- a/src/mainboard/google/volteer/variants/halvor/gpio.c +++ b/src/mainboard/google/volteer/variants/halvor/gpio.c @@ -1,15 +1,152 @@ /* SPDX-License-Identifier: GPL-2.0-only */ -#include <baseboard/gpio.h> +#include <variant/gpio.h> #include <baseboard/variants.h> #include <commonlib/helpers.h> /* Pad configuration in ramstage */ +/* Leave eSPI pins untouched from default settings */ static const struct pad_config gpio_table[] = { + /* A0 thru A6 come configured out of reset, do not touch */ + /* A0 : ESPI_IO0 ==> ESPI_IO_0 */ + /* A1 : ESPI_IO1 ==> ESPI_IO_1 */ + /* A2 : ESPI_IO2 ==> ESPI_IO_2 */ + /* A3 : ESPI_IO3 ==> ESPI_IO_3 */ + /* A4 : ESPI_CS# ==> ESPI_CS_L */ + /* A5 : ESPI_CLK ==> ESPI_CLK */ + /* A6 : ESPI_RESET# ==> NC(TP764) */ + /* A7 : I2S2_SCLK ==> I2S1_SCLK */ + PAD_CFG_NF(GPP_A7, NONE, DEEP, NF1), + /* A8 : I2S2_SFRM ==> I2S1_SFRM */ + PAD_CFG_NF(GPP_A8, NONE, DEEP, NF1), + /* A9 : I2S2_TXD ==> I2S1_TXD */ + PAD_CFG_NF(GPP_A9, NONE, DEEP, NF1), + /* A10 : I2S2_RXD ==> I2S1_RXD */ + PAD_CFG_NF(GPP_A10, NONE, DEEP, NF1), + /* A18 : DDSP_HPDB ==> NC */ + PAD_NC(GPP_A18, NONE), + /* A22 : DDPC_CTRLDATA ==> NC */ + PAD_NC(GPP_A22, NONE), + /* A23 : I2S1_SCLK ==> HP_INT_L */ + PAD_CFG_GPI_INT(GPP_A23, NONE, PLTRST, EDGE_BOTH), + /* B2 : VRALERT# ==> NC */ + PAD_NC(GPP_B2, NONE), + /* B3 : CPU_GP2 ==> NC */ + PAD_NC(GPP_B3, NONE), + /* B5 : ISH_I2C0_CVF_SDA ==> NC */ + PAD_NC(GPP_B5, NONE), + /* B6 : ISH_I2C0_CVF_SCL ==> NC */ + PAD_NC(GPP_B6, NONE), + /* B7 : ISH_12C1_SDA ==> I2C_SENSOR_SDA */ + PAD_CFG_NF(GPP_B7, NONE, DEEP, NF1), + /* B8 : ISH_I2C1_SCL ==> I2C_SENSOR_SCL */ + PAD_CFG_NF(GPP_B8, NONE, DEEP, NF1), + + /* C1 : SMBDATA ==> FPMCU_BOOT1 */ + PAD_CFG_GPO(GPP_C1, 0, DEEP), + /* C7 : SML1DATA ==> NC */ + PAD_NC(GPP_C7, NONE), + /* C10 : UART0_RTS# ==> USI_RST_L */ + PAD_CFG_GPO(GPP_C10, 1, DEEP), + /* C11 : UART0_CTS# ==> NC */ + PAD_NC(GPP_C11, NONE), + /* C13 : UART1_TXD ==> NC */ + PAD_NC(GPP_C13, NONE), + + /* D7 : SRCCLKREQ2# ==> NC */ + PAD_NC(GPP_D7, NONE), + /* D9 : ISH_SPI_CS# ==> TBT_LSX2_TXD */ + PAD_CFG_NF(GPP_D9, NONE, DEEP, NF4), + /* D10 : ISH_SPI_CLK ==> TBT_LSX2_RXD */ + PAD_CFG_NF(GPP_D10, NONE, DEEP, NF4), + /* D11 : ISH_SPI_MISO ==> NC */ + PAD_NC(GPP_D11, NONE), + /* D12 : ISH_SPI_MOSI ==> NC */ + PAD_NC(GPP_D12, NONE), + + /* E0 : SATAXPCIE0 ==> NC */ + PAD_NC(GPP_E0, NONE), + /* E1 : SPI1_IO2 ==> NC */ + PAD_NC(GPP_E1, NONE), + /* E2 : SPI1_IO3 ==> NC */ + PAD_NC(GPP_E2, NONE), + /* E5 : SATA_DEVSLP1 ==> NC */ + PAD_NC(GPP_E5, NONE), + /* E10 : SPI1_CS# ==> NC */ + PAD_NC(GPP_E10, NONE), + /* E12 : SPI1_MISO_IO1 ==> NC */ + PAD_NC(GPP_E12, NONE), + /* E13 : SPI1_MOSI_IO0 ==> NC */ + PAD_NC(GPP_E13, NONE), + /* E16 : ISH_GP7 ==> SD_PRSNT# */ + PAD_CFG_GPI(GPP_E16, NONE, DEEP), + /* E17 : THC0_SPI1_INT# ==> NC */ + PAD_NC(GPP_E17, NONE), + /* E22 : DDPA_CTRLCLK ==> NC */ + PAD_NC(GPP_E22, NONE), + /* E23 : DDPA_CTRLDATA ==> NC */ + PAD_NC(GPP_E23, NONE), + + /* F8 : I2S_MCLK2_INOUT ==> NC */ + PAD_NC(GPP_F8, NONE), + /* F10 : GPPF10_STRAP */ + PAD_NC(GPP_F10, NONE), + /* F11 : THC1_SPI2_CLK ==> NC */ + PAD_NC(GPP_F11, NONE), + /* F12 : GSXDOUT ==> EN_PP3300_TRACKPAD */ + PAD_CFG_GPO(GPP_F12, 1, DEEP), + /* F14 : GSXDIN ==> NC */ + PAD_NC(GPP_F14, NONE), + /* F15 : GSXSRESET# ==> NC */ + PAD_NC(GPP_F15, NONE), + /* F16 : GSXCLK ==> EN_PP3300_TOUCHSCREEN */ + PAD_CFG_GPO(GPP_F16, 1, DEEP), + /* F17 : WWAN_RF_DISABLE_ODL ==> EC_IN_RW_OD */ + PAD_CFG_GPI(GPP_F17, NONE, DEEP), + /* F18 : THC1_SPI2_INT# ==> EN_SPKR_PA */ + PAD_CFG_GPO(GPP_F18, 1, DEEP), + /* F19 : SRCCLKREQ6# ==> NC */ + PAD_NC(GPP_F19, NONE), + + /* H6 : I2C3_SDA */ + PAD_CFG_NF(GPP_H6, NONE, DEEP, NF1), + /* H7 : I2C3_SCL */ + PAD_CFG_NF(GPP_H7, NONE, DEEP, NF1), + /* H12 : M2_SKT2_CFG0 ==> NC */ + PAD_NC(GPP_H12, NONE), + /* H13 : M2_SKT2_CFG1 # ==> SPKR_INT# */ + PAD_CFG_GPI(GPP_H13, NONE, DEEP), + /* H14 : M2_SKT2_CFG2 # ==> NC */ + PAD_NC(GPP_H14, NONE), + /* H15 : M2_SKT2_CFG3 # ==> NC */ + PAD_NC(GPP_H15, NONE), + /* H16 : DDPB_CTRLCLK ==> NC */ + PAD_NC(GPP_H16, NONE), + /* H17 : DDPB_CTRLDATA ==> NC */ + PAD_NC(GPP_H17, NONE), + /* H23 : IMGCLKOUT4 ==> NC */ + PAD_NC(GPP_H23, NONE), + + /* R4 : HDA_RST# ==> NC */ + PAD_NC(GPP_R4, NONE), + /* R5 : HDA_SDI1 ==> NC */ + PAD_NC(GPP_R5, NONE), + /* R6 : I2S1_TXD ==> NC */ + PAD_NC(GPP_R6, NONE), + /* R7 : I2S1_SFRM ==> NC */ + PAD_NC(GPP_R7, NONE), + + /* S4 : SNDW2_CLK ==> SOC_DMIC_CLK1 */ + PAD_CFG_NF(GPP_S4, NONE, DEEP, NF2), + /* S5 : SNDW2_DATA ==> SOC_DMIC_DATA1 */ + PAD_CFG_NF(GPP_S5, NONE, DEEP, NF2), + + /* GPD11: LANPHYC ==> NC */ + PAD_NC(GPD11, NONE), }; -const struct pad_config *variant_base_gpio_table(size_t *num) +const struct pad_config *variant_override_gpio_table(size_t *num) { *num = ARRAY_SIZE(gpio_table); return gpio_table; @@ -17,7 +154,38 @@ const struct pad_config *variant_base_gpio_table(size_t *num) /* Early pad configuration in bootblock */ static const struct pad_config early_gpio_table[] = { + /* A12 : SATAXPCIE1 ==> M2_SSD_PEDET */ + PAD_CFG_NF(GPP_A12, NONE, DEEP, NF1), + + /* A17 : DDSP_HPDC ==> MEM_CH_SEL */ + PAD_CFG_GPI(GPP_A17, NONE, DEEP), + + /* B11 : PMCALERT# ==> PCH_WP_OD */ + PAD_CFG_GPI_GPIO_DRIVER(GPP_B11, NONE, DEEP), + + /* B15 : GSPI0_CS0# ==> PCH_GSPI0_H1_TPM_CS_L */ + PAD_CFG_NF(GPP_B15, NONE, DEEP, NF1), + /* B16 : GSPI0_CLK ==> PCH_GSPI0_H1_TPM_CLK */ + PAD_CFG_NF(GPP_B16, NONE, DEEP, NF1), + + /* B17 : GSPI0_MISO ==> PCH_GSPIO_H1_TPM_MISO */ + PAD_CFG_NF(GPP_B17, NONE, DEEP, NF1), + + /* B18 : GSPI0_MOSI ==> PCH_GSPI0_H1_TPM_MOSI_STRAP */ + PAD_CFG_NF(GPP_B18, NONE, DEEP, NF1), + + /* C0 : SMBCLK ==> EN_PP3300_WLAN */ + PAD_CFG_GPO(GPP_C0, 1, DEEP), + + /* C21 : UART2_TXD ==> H1_PCH_INT_ODL */ + PAD_CFG_GPI_APIC(GPP_C21, NONE, PLTRST, LEVEL, INVERT), + + /* C22 : UART2_RTS# ==> PCH_FPMCU_BOOT0 */ + PAD_CFG_GPO(GPP_C22, 0, DEEP), + + /* H11 : SRCCLKREQ5# ==> WLAN_PERST_L */ + PAD_CFG_GPO(GPP_H11, 1, DEEP), }; const struct pad_config *variant_early_gpio_table(size_t *num) @@ -25,12 +193,3 @@ const struct pad_config *variant_early_gpio_table(size_t *num) *num = ARRAY_SIZE(early_gpio_table); return early_gpio_table; } - -static const struct cros_gpio cros_gpios[] = { -}; - -const struct cros_gpio *variant_cros_gpios(size_t *num) -{ - *num = ARRAY_SIZE(cros_gpios); - return cros_gpios; -} diff --git a/src/mainboard/google/volteer/variants/halvor/include/variant/gpio.h b/src/mainboard/google/volteer/variants/halvor/include/variant/gpio.h index 0075826350..fe512d8c4a 100644 --- a/src/mainboard/google/volteer/variants/halvor/include/variant/gpio.h +++ b/src/mainboard/google/volteer/variants/halvor/include/variant/gpio.h @@ -5,6 +5,8 @@ #include <baseboard/gpio.h> -/* Copied from baseboard and may need to change for the new variant. */ +#undef GPIO_EC_IN_RW +/* EC in RW */ +#define GPIO_EC_IN_RW GPP_F17 #endif diff --git a/src/mainboard/google/volteer/variants/halvor/overridetree.cb b/src/mainboard/google/volteer/variants/halvor/overridetree.cb index 75422d80bb..20a90cc6ba 100644 --- a/src/mainboard/google/volteer/variants/halvor/overridetree.cb +++ b/src/mainboard/google/volteer/variants/halvor/overridetree.cb @@ -1,4 +1,58 @@ chip soc/intel/tigerlake + register "usb2_ports[0]" = "USB2_PORT_EMPTY" # Type-A / Type-C Not Used + register "usb2_ports[1]" = "USB2_PORT_TYPE_C(OC0)" # Type-A / Type-C Port 0 + register "usb2_ports[2]" = "USB2_PORT_EMPTY" # Type-A / Type-C Not Used + register "usb2_ports[3]" = "USB2_PORT_TYPE_C(OC1)" # Type-A / Type-C Port 1 + register "usb2_ports[4]" = "USB2_PORT_MID(OC_SKIP)" # Front Camera + register "usb2_ports[5]" = "USB2_PORT_TYPE_C(OC2)" # Type-A / Type-C Port 2 + register "usb2_ports[6]" = "USB2_PORT_EMPTY" # Type-A / Type-C Not Used + register "usb2_ports[7]" = "USB2_PORT_EMPTY" # Type-A / Type-C Not Used + register "usb2_ports[8]" = "USB2_PORT_EMPTY" # Type-A / Type-C Not Used + register "usb2_ports[9]" = "USB2_PORT_EMPTY" # Type-A / Type-C Not Used + + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # Type-A / Type-C Port 0 + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC1)" # Type-A / Type-C Port 1 + register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC2)" # Type-A / Type-C Port 2 + register "usb3_ports[3]" = "USB3_PORT_EMPTY" # Type-A / Type-C Not Used + device domain 0 on + device pci 15.0 on + chip drivers/i2c/generic + register "hid" = ""10EC5682"" + register "name" = ""RT58"" + register "desc" = ""Headset Codec"" + register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_A23)" + # Set the jd_src to RT5668_JD1 for jack detection + register "property_count" = "1" + register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER" + register "property_list[0].name" = ""realtek,jd-src"" + register "property_list[0].integer" = "1" + device i2c 1a on end + end + chip drivers/i2c/max98373 + register "vmon_slot_no" = "0" + register "imon_slot_no" = "1" + register "uid" = "0" + register "desc" = ""Right Speaker Amp"" + register "name" = ""MAXR"" + device i2c 31 on end + end + chip drivers/i2c/max98373 + register "vmon_slot_no" = "2" + register "imon_slot_no" = "3" + register "uid" = "1" + register "desc" = ""Left Speaker Amp"" + register "name" = ""MAXL"" + device i2c 32 on end + end + end # I2C #0 0xA0E8 + device pci 1f.3 on + chip drivers/generic/max98357a + register "hid" = ""MX98357A"" + register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_F18)" + register "sdmode_delay" = "5" + device generic 0 on end + end + end # Intel HD audio 0xA0C8-A0CF end end |