diff options
Diffstat (limited to 'src/mainboard')
4 files changed, 6 insertions, 111 deletions
diff --git a/src/mainboard/google/brya/Kconfig.name b/src/mainboard/google/brya/Kconfig.name index 97cfc9a09f..ee3987be27 100644 --- a/src/mainboard/google/brya/Kconfig.name +++ b/src/mainboard/google/brya/Kconfig.name @@ -293,7 +293,6 @@ config BOARD_GOOGLE_QUANDISO select BOARD_GOOGLE_BASEBOARD_NISSA select CHROMEOS_WIFI_SAR if CHROMEOS select DRIVERS_GENERIC_GPIO_KEYS - select DRIVERS_INTEL_MIPI_CAMERA select HAVE_WWAN_POWER_SEQUENCE config BOARD_GOOGLE_REDRIX diff --git a/src/mainboard/google/brya/variants/quandiso/fw_config.c b/src/mainboard/google/brya/variants/quandiso/fw_config.c index 0f08a43b83..5efde122d3 100644 --- a/src/mainboard/google/brya/variants/quandiso/fw_config.c +++ b/src/mainboard/google/brya/variants/quandiso/fw_config.c @@ -17,21 +17,6 @@ static const struct pad_config lte_disable_pads[] = { PAD_NC(GPP_H23, NONE), }; -static const struct pad_config wfc_disable_pads[] = { - /* D3 : WCAM_RST_L */ - PAD_NC_LOCK(GPP_D3, NONE, LOCK_CONFIG), - /* D15 : EN_PP2800_WCAM_X */ - PAD_NC_LOCK(GPP_D15, NONE, LOCK_CONFIG), - /* D16 : EN_PP1800_PP1200_WCAM_X */ - PAD_NC_LOCK(GPP_D16, NONE, LOCK_CONFIG), - /* H22 : WCAM_MCLK_R */ - PAD_NC(GPP_H22, NONE), - /* R6 : DMIC_WCAM_CLK_R */ - PAD_NC(GPP_R6, NONE), - /* R7 : DMIC_WCAM_DATA */ - PAD_NC(GPP_R7, NONE), -}; - static const struct pad_config emmc_disable_pads[] = { /* I7 : EMMC_CMD */ PAD_NC(GPP_I7, NONE), @@ -78,11 +63,6 @@ void fw_config_gpio_padbased_override(struct pad_config *padbased_table) gpio_padbased_override(padbased_table, lte_disable_pads, ARRAY_SIZE(lte_disable_pads)); } - if (fw_config_probe(FW_CONFIG(WFC, WFC_ABSENT))) { - printk(BIOS_INFO, "Disable MIPI WFC GPIO pins.\n"); - gpio_padbased_override(padbased_table, wfc_disable_pads, - ARRAY_SIZE(wfc_disable_pads)); - } if (fw_config_is_provisioned() && !fw_config_probe(FW_CONFIG(STORAGE, STORAGE_EMMC))) { printk(BIOS_INFO, "Disable eMMC GPIO pins.\n"); gpio_padbased_override(padbased_table, emmc_disable_pads, diff --git a/src/mainboard/google/brya/variants/quandiso/gpio.c b/src/mainboard/google/brya/variants/quandiso/gpio.c index e2f2aca857..ab0a876d7b 100644 --- a/src/mainboard/google/brya/variants/quandiso/gpio.c +++ b/src/mainboard/google/brya/variants/quandiso/gpio.c @@ -16,10 +16,16 @@ static const struct pad_config override_gpio_table[] = { /* A22 : GPP_A22 ==> USB_C1_AUX_DC_N */ PAD_CFG_GPO(GPP_A22, 1, DEEP), + /* D3 : WCAM_RST_L ==> NC */ + PAD_NC_LOCK(GPP_D3, NONE, LOCK_CONFIG), /* D6 : WWAN_EN */ PAD_CFG_GPO(GPP_D6, 1, DEEP), /* D8 : SD_CLKREQ_ODL ==> NC */ PAD_NC(GPP_D8, NONE), + /* D15 : EN_PP2800_WCAM_X ==> NC */ + PAD_NC_LOCK(GPP_D15, NONE, LOCK_CONFIG), + /* D16 : EN_PP1800_PP1200_WCAM_X ==> NC */ + PAD_NC_LOCK(GPP_D16, NONE, LOCK_CONFIG), /* F6 : CNV_PA_BLANKING ==> NC */ PAD_NC(GPP_F6, NONE), diff --git a/src/mainboard/google/brya/variants/quandiso/overridetree.cb b/src/mainboard/google/brya/variants/quandiso/overridetree.cb index 6d2b47f918..2ff69fb923 100644 --- a/src/mainboard/google/brya/variants/quandiso/overridetree.cb +++ b/src/mainboard/google/brya/variants/quandiso/overridetree.cb @@ -222,20 +222,6 @@ chip soc/intel/alderlake device generic 0 on end end end - device ref ipu on - chip drivers/intel/mipi_camera - register "acpi_uid" = "0x50000" - register "acpi_name" = ""IPU0"" - register "device_type" = "INTEL_ACPI_CAMERA_CIO2" - - register "cio2_num_ports" = "1" - register "cio2_lanes_used" = "{4}" # 4 CSI Camera lanes are used - register "cio2_lane_endpoint[0]" = ""^I2C2.CAM0"" - register "cio2_prt[0]" = "1" - device generic 0 on end - end - probe WFC WFC_MIPI_OVTI8856 - end device ref cnvi_wifi on chip drivers/wifi/generic register "enable_cnvi_ddr_rfim" = "true" @@ -304,82 +290,6 @@ chip soc/intel/alderlake end end end - device ref i2c2 on - chip drivers/intel/mipi_camera - register "acpi_hid" = ""OVTI8856"" - register "acpi_uid" = "0" - register "acpi_name" = ""CAM0"" - register "chip_name" = ""Ov 8856 Camera"" - register "device_type" = "INTEL_ACPI_CAMERA_SENSOR" - register "has_power_resource" = "1" - register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD" - - register "ssdb.lanes_used" = "4" - register "ssdb.link_used" = "1" - register "ssdb.vcm_type" = "0x0C" - register "vcm_name" = ""VCM0"" - register "num_freq_entries" = "2" - register "link_freq[0]" = "360000000" - register "link_freq[1]" = "180000000" - register "remote_name" = ""IPU0"" - - #Controls - register "clk_panel.clks[0].clknum" = "IMGCLKOUT_3" - register "clk_panel.clks[0].freq" = "FREQ_19_2_MHZ" - - register "gpio_panel.gpio[0].gpio_num" = "GPP_D15" # EN_PP2800_WCAM_X - register "gpio_panel.gpio[1].gpio_num" = "GPP_D16" # EN_PP1800_PP1200_WCAM_X - register "gpio_panel.gpio[2].gpio_num" = "GPP_D3" # WCAM_RST_L - - #_ON - register "on_seq.ops_cnt" = "5" - register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)" - register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 5)" - register "on_seq.ops[2]" = "SEQ_OPS_GPIO_ENABLE(1, 5)" - register "on_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(2, 5)" - register "on_seq.ops[4]" = "SEQ_OPS_GPIO_ENABLE(2, 5)" - - #_OFF - register "off_seq.ops_cnt" = "4" - register "off_seq.ops[0]" = "SEQ_OPS_CLK_DISABLE(0, 0)" - register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(2, 0)" - register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 0)" - register "off_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" - - device i2c 36 on - probe WFC WFC_MIPI_OVTI8856 - end - end - chip drivers/intel/mipi_camera - register "acpi_uid" = "3" - register "acpi_name" = ""VCM0"" - register "chip_name" = ""DW AF DAC"" - register "device_type" = "INTEL_ACPI_CAMERA_VCM" - - register "vcm_compat" = ""dongwoon,dw9714"" - - device i2c 0C on - probe WFC WFC_MIPI_OVTI8856 - end - end - chip drivers/intel/mipi_camera - register "acpi_hid" = "ACPI_DT_NAMESPACE_HID" - register "acpi_uid" = "1" - register "acpi_name" = ""NVM0"" - register "chip_name" = ""GT24C08"" - register "device_type" = "INTEL_ACPI_CAMERA_NVM" - - register "nvm_size" = "0x400" - register "nvm_pagesize" = "1" - register "nvm_readonly" = "1" - register "nvm_width" = "0x08" - register "nvm_compat" = ""atmel,24c08"" - - device i2c 50 on - probe WFC WFC_MIPI_OVTI8856 - end - end - end device ref i2c3 on chip drivers/i2c/generic register "hid" = ""RTL5682"" |