diff options
Diffstat (limited to 'src/mainboard')
27 files changed, 3012 insertions, 0 deletions
diff --git a/src/mainboard/google/Kconfig b/src/mainboard/google/Kconfig index cf2fad3f71..0603566a7e 100644 --- a/src/mainboard/google/Kconfig +++ b/src/mainboard/google/Kconfig @@ -21,11 +21,14 @@ if VENDOR_GOOGLE choice prompt "Mainboard model" +config BOARD_GOOGLE_PARROT + bool "Parrot" config BOARD_GOOGLE_SNOW bool "Snow" endchoice +source "src/mainboard/google/parrot/Kconfig" source "src/mainboard/google/snow/Kconfig" config MAINBOARD_VENDOR diff --git a/src/mainboard/google/parrot/Kconfig b/src/mainboard/google/parrot/Kconfig new file mode 100644 index 0000000000..e1410335f8 --- /dev/null +++ b/src/mainboard/google/parrot/Kconfig @@ -0,0 +1,57 @@ +if BOARD_GOOGLE_PARROT + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select ARCH_X86 + select CPU_INTEL_SOCKET_RPGA989 + select NORTHBRIDGE_INTEL_IVYBRIDGE + select SOUTHBRIDGE_INTEL_C216 + select EC_COMPAL_ENE932 + select BOARD_HAS_FADT + select BOARD_ROMSIZE_KB_8192 + select HAVE_ACPI_TABLES + select HAVE_OPTION_TABLE + select HAVE_ACPI_RESUME + select HAVE_MAINBOARD_RESOURCES + select MMCONF_SUPPORT + select HAVE_SMI_HANDLER + select GFXUMA + select CHROMEOS + select EXTERNAL_MRC_BLOB + + # Workaround for EC/KBC IRQ1. + select SERIRQ_CONTINUOUS_MODE + +config MAINBOARD_DIR + string + default google/parrot + +config MAINBOARD_PART_NUMBER + string + default "Parrot" + +config MMCONF_BASE_ADDRESS + hex + default 0xf0000000 + +config IRQ_SLOT_COUNT + int + default 18 + +config MAX_CPUS + int + default 8 + +config VGA_BIOS_FILE + string + default "pci8086,0106.rom" + +config MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID + hex + default 0x1ae0 + +config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID + hex + default 0xc000 + +endif # BOARD_GOOGLE_PARROT diff --git a/src/mainboard/google/parrot/Makefile.inc b/src/mainboard/google/parrot/Makefile.inc new file mode 100644 index 0000000000..c4fb74dcd6 --- /dev/null +++ b/src/mainboard/google/parrot/Makefile.inc @@ -0,0 +1,27 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +ramstage-y += ec.c + +romstage-$(CONFIG_CHROMEOS) += chromeos.c +ramstage-$(CONFIG_CHROMEOS) += chromeos.c + +smm-$(CONFIG_HAVE_SMI_HANDLER) += mainboard_smi.c + +SRC_ROOT = $(src)/mainboard/google/parrot diff --git a/src/mainboard/google/parrot/acpi/chromeos.asl b/src/mainboard/google/parrot/acpi/chromeos.asl new file mode 100644 index 0000000000..622b5d9404 --- /dev/null +++ b/src/mainboard/google/parrot/acpi/chromeos.asl @@ -0,0 +1,25 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +Name(OIPG, Package() { + Package() { 0x001, 1, 0xFF, "PantherPoint" }, // recovery button + Package() { 0x002, 1, 0xFF, "PantherPoint" }, // developer button + Package() { 0x003, 0, 70, "PantherPoint" }, // firmware write protect +}) + diff --git a/src/mainboard/google/parrot/acpi/ec.asl b/src/mainboard/google/parrot/acpi/ec.asl new file mode 100644 index 0000000000..522a0b9a98 --- /dev/null +++ b/src/mainboard/google/parrot/acpi/ec.asl @@ -0,0 +1,25 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 The ChromiumOS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* mainboard configuration */ +#include "../ec.h" +#define EC_SCI 23 // GPIO7 << 16 to GPE bit for Runtime SCI + +/* ACPI code for EC functions */ +#include "../../../../ec/compal/ene932/acpi/ec.asl" diff --git a/src/mainboard/google/parrot/acpi/ivybridge_pci_irqs.asl b/src/mainboard/google/parrot/acpi/ivybridge_pci_irqs.asl new file mode 100644 index 0000000000..dd32379fac --- /dev/null +++ b/src/mainboard/google/parrot/acpi/ivybridge_pci_irqs.asl @@ -0,0 +1,69 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This is board specific information: IRQ routing for IvyBridge */ + +// PCI Interrupt Routing +Method(_PRT) +{ + If (PICM) { + Return (Package() { + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, 0, 16 }, + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, 0, 22 }, + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 0, 0, 19 }, + Package() { 0x001cffff, 1, 0, 20 }, + Package() { 0x001cffff, 2, 0, 17 }, + Package() { 0x001cffff, 3, 0, 18 }, + // EHCI #1 0:1d.0 + Package() { 0x001dffff, 0, 0, 19 }, + // EHCI #2 0:1a.0 + Package() { 0x001affff, 0, 0, 20 }, + // LPC devices 0:1f.0 + Package() { 0x001fffff, 0, 0, 21 }, + Package() { 0x001fffff, 1, 0, 22 }, + Package() { 0x001fffff, 2, 0, 23 }, + Package() { 0x001fffff, 3, 0, 16 }, + }) + } Else { + Return (Package() { + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, \_SB.PCI0.LPCB.LNKG, 0 }, + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 0, \_SB.PCI0.LPCB.LNKD, 0 }, + Package() { 0x001cffff, 1, \_SB.PCI0.LPCB.LNKE, 0 }, + Package() { 0x001cffff, 2, \_SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x001cffff, 3, \_SB.PCI0.LPCB.LNKC, 0 }, + // EHCI #1 0:1d.0 + Package() { 0x001dffff, 0, \_SB.PCI0.LPCB.LNKD, 0 }, + // EHCI #2 0:1a.0 + Package() { 0x001affff, 0, \_SB.PCI0.LPCB.LNKE, 0 }, + // LPC device 0:1f.0 + Package() { 0x001fffff, 0, \_SB.PCI0.LPCB.LNKF, 0 }, + Package() { 0x001fffff, 1, \_SB.PCI0.LPCB.LNKG, 0 }, + Package() { 0x001fffff, 2, \_SB.PCI0.LPCB.LNKH, 0 }, + Package() { 0x001fffff, 3, \_SB.PCI0.LPCB.LNKA, 0 }, + }) + } +} + diff --git a/src/mainboard/google/parrot/acpi/mainboard.asl b/src/mainboard/google/parrot/acpi/mainboard.asl new file mode 100644 index 0000000000..7b9aef0e91 --- /dev/null +++ b/src/mainboard/google/parrot/acpi/mainboard.asl @@ -0,0 +1,71 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011-2012 Google Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +Scope (\_GPE) { + Method(_L1F, 0x0, NotSerialized) + { + Notify(\_SB.LID0,0x80) + } +} + +Scope (\_SB) { + Device (LID0) + { + Name(_HID, EisaId("PNP0C0D")) + Method(_LID, 0) + { + Store (GP15, \LIDS) + Return (\LIDS) + } + } + + Device (PWRB) + { + Name(_HID, EisaId("PNP0C0C")) + } + + Device (TPAD) + { + Name (_ADR, 0x0) + Name (_UID, 1) + + // Report as a Sleep Button device so Linux will + // automatically enable it as a wake source + Name(_HID, EisaId("PNP0C0E")) + + // Trackpad Wake is GPIO12, wake from S3 + Name(_PRW, Package(){0x1c, 0x03}) + + Name(_CRS, ResourceTemplate() + { + + // PIRQA -> GSI16 + Interrupt (ResourceConsumer, Level, ActiveLow) {16} + + // PIRQE -> GSI20 + Interrupt (ResourceConsumer, Edge, ActiveLow) {20} + + // SMBUS Address 0x67 + VendorShort (ADDR) {0x67} + }) + } + +} diff --git a/src/mainboard/google/parrot/acpi/platform.asl b/src/mainboard/google/parrot/acpi/platform.asl new file mode 100644 index 0000000000..2d59ebe3c4 --- /dev/null +++ b/src/mainboard/google/parrot/acpi/platform.asl @@ -0,0 +1,88 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011-2012 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* The APM port can be used for generating software SMIs */ + +OperationRegion (APMP, SystemIO, 0xb2, 2) +Field (APMP, ByteAcc, NoLock, Preserve) +{ + APMC, 8, // APM command + APMS, 8 // APM status +} + +/* Port 80 POST */ + +OperationRegion (POST, SystemIO, 0x80, 1) +Field (POST, ByteAcc, Lock, Preserve) +{ + DBG0, 8 +} + +/* SMI I/O Trap */ +Method(TRAP, 1, Serialized) +{ + Store (Arg0, SMIF) // SMI Function + Store (0, TRP0) // Generate trap + Return (SMIF) // Return value of SMI handler +} + +/* The _PIC method is called by the OS to choose between interrupt + * routing via the i8259 interrupt controller or the APIC. + * + * _PIC is called with a parameter of 0 for i8259 configuration and + * with a parameter of 1 for Local Apic/IOAPIC configuration. + */ + +Method(_PIC, 1) +{ + // Remember the OS' IRQ routing choice. + Store(Arg0, PICM) +} + +/* The _PTS method (Prepare To Sleep) is called before the OS is + * entering a sleep state. The sleep state number is passed in Arg0 + */ + +Method(_PTS,1) +{ + +} + +/* The _WAK method is called on system wakeup */ + +Method(_WAK,1) +{ + /* Update in case state changed while asleep */ + /* Update AC status */ + Store (\_SB.PCI0.LPCB.EC0.ADPT, Local0) + if (LNotEqual (Local0, \PWRS)) { + Store (Local0, \PWRS) + Notify (\_SB.PCI0.LPCB.EC0.AC, 0x80) + } + + /* Update LID status */ + Store (GP15, Local0) + if (LNotEqual (Local0, \LIDS)) { + Store (Local0, \LIDS) + Notify (\_SB.LID0, 0x80) + } + + Return(Package(){0,0}) +} + diff --git a/src/mainboard/google/parrot/acpi/sandybridge_pci_irqs.asl b/src/mainboard/google/parrot/acpi/sandybridge_pci_irqs.asl new file mode 100644 index 0000000000..ee4221a03e --- /dev/null +++ b/src/mainboard/google/parrot/acpi/sandybridge_pci_irqs.asl @@ -0,0 +1,69 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This is board specific information: IRQ routing for Sandybridge */ + +// PCI Interrupt Routing +Method(_PRT) +{ + If (PICM) { + Return (Package() { + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, 0, 16 }, + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, 0, 16 }, + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 0, 0, 19 }, + Package() { 0x001cffff, 1, 0, 20 }, + Package() { 0x001cffff, 2, 0, 17 }, + Package() { 0x001cffff, 3, 0, 18 }, + // EHCI #1 0:1d.0 + Package() { 0x001dffff, 0, 0, 19 }, + // EHCI #2 0:1a.0 + Package() { 0x001affff, 0, 0, 21 }, + // LPC devices 0:1f.0 + Package() { 0x001fffff, 0, 0, 17 }, + Package() { 0x001fffff, 1, 0, 23 }, + Package() { 0x001fffff, 2, 0, 16 }, + Package() { 0x001fffff, 3, 0, 18 }, + }) + } Else { + Return (Package() { + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 0, \_SB.PCI0.LPCB.LNKD, 0 }, + Package() { 0x001cffff, 1, \_SB.PCI0.LPCB.LNKE, 0 }, + Package() { 0x001cffff, 2, \_SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x001cffff, 3, \_SB.PCI0.LPCB.LNKC, 0 }, + // EHCI #1 0:1d.0 + Package() { 0x001dffff, 0, \_SB.PCI0.LPCB.LNKD, 0 }, + // EHCI #2 0:1a.0 + Package() { 0x001affff, 0, \_SB.PCI0.LPCB.LNKF, 0 }, + // LPC device 0:1f.0 + Package() { 0x001fffff, 0, \_SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x001fffff, 1, \_SB.PCI0.LPCB.LNKH, 0 }, + Package() { 0x001fffff, 2, \_SB.PCI0.LPCB.LNKA, 0 }, + Package() { 0x001fffff, 3, \_SB.PCI0.LPCB.LNKC, 0 }, + }) + } +} + diff --git a/src/mainboard/google/parrot/acpi/superio.asl b/src/mainboard/google/parrot/acpi/superio.asl new file mode 100644 index 0000000000..e4856fcddb --- /dev/null +++ b/src/mainboard/google/parrot/acpi/superio.asl @@ -0,0 +1,27 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 The ChromiumOS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* mainboard configuration */ +#include "../ec.h" + + +#define SIO_EC_ENABLE_PS2K // Enable PS/2 Keyboard + +/* ACPI code for EC SuperIO functions */ +#include "../../../../ec/compal/ene932/acpi/superio.asl" diff --git a/src/mainboard/google/parrot/acpi/thermal.asl b/src/mainboard/google/parrot/acpi/thermal.asl new file mode 100644 index 0000000000..440612c54a --- /dev/null +++ b/src/mainboard/google/parrot/acpi/thermal.asl @@ -0,0 +1,98 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +// Thermal Zone + +Scope (\_TZ) +{ + ThermalZone (THRM) + { + Name (_TC1, 0x02) + Name (_TC2, 0x05) + + // Ignore critical temps for the first few reads + // at boot to prevent unexpected shutdown + Name (IRDC, 4) + Name (CRDC, 0) + + // Thermal zone polling frequency: 10 seconds + Name (_TZP, 100) + + // Thermal sampling period for passive cooling: 2 seconds + Name (_TSP, 20) + + // Convert from Degrees C to 1/10 Kelvin for ACPI + Method (CTOK, 1) { + // 10th of Degrees C + Multiply (Arg0, 10, Local0) + + // Convert to Kelvin + Add (Local0, 2732, Local0) + + Return (Local0) + } + + // Threshold for OS to shutdown + Method (_CRT, 0, Serialized) + { + Return (CTOK (\TCRT)) + } + + // Threshold for passive cooling + Method (_PSV, 0, Serialized) + { + Return (CTOK (\TPSV)) + } + + // Processors used for passive cooling + Method (_PSL, 0, Serialized) + { + Return (\PPKG ()) + } + + Method (_TMP, 0, Serialized) + { + // Get CPU Temperature from the Embedded Controller + Store (\_SB.PCI0.LPCB.EC0.CTMP, Local0) + + // Re-read from EC if the temperature is very high to + // avoid OS shutdown if we got a bad reading. + If (LGreaterEqual (Local0, \TCRT)) { + Store (\_SB.PCI0.LPCB.EC0.CTMP, Local0) + If (LGreaterEqual (Local0, \TCRT)) { + // Check if this is an early read + If (LLess (CRDC, IRDC)) { + Store (0, Local0) + } + } + } + + // Keep track of first few reads by the OS + If (LLess (CRDC, IRDC)) { + Increment (CRDC) + } + + Return (CTOK (Local0)) + } + +// The EC does all fan control. The is no Active Cooling Fan control (_ACx). + + } +} + diff --git a/src/mainboard/google/parrot/acpi/video.asl b/src/mainboard/google/parrot/acpi/video.asl new file mode 100644 index 0000000000..3ececa912b --- /dev/null +++ b/src/mainboard/google/parrot/acpi/video.asl @@ -0,0 +1,43 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +// Brightness write +Method (BRTW, 1, Serialized) +{ + // TODO +} + +// Hot Key Display Switch +Method (HKDS, 1, Serialized) +{ + // TODO +} + +// Lid Switch Display Switch +Method (LSDS, 1, Serialized) +{ + // TODO +} + +// Brightness Notification +Method(BRTN,1,Serialized) +{ + // TODO (no displays defined yet) +} + diff --git a/src/mainboard/google/parrot/acpi_tables.c b/src/mainboard/google/parrot/acpi_tables.c new file mode 100644 index 0000000000..8308c01131 --- /dev/null +++ b/src/mainboard/google/parrot/acpi_tables.c @@ -0,0 +1,268 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <types.h> +#include <string.h> +#include <cbmem.h> +#include <console/console.h> +#include <arch/acpi.h> +#include <arch/ioapic.h> +#include <arch/acpigen.h> +#include <arch/smp/mpspec.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <cpu/cpu.h> +#include <cpu/x86/msr.h> +#include <vendorcode/google/chromeos/gnvs.h> +#include <ec/compal/ene932/ec.h> +#include "ec.h" + +extern const unsigned char AmlCode[]; +#if CONFIG_HAVE_ACPI_SLIC +unsigned long acpi_create_slic(unsigned long current); +#endif + +#include <southbridge/intel/bd82x6x/pch.h> +#include <southbridge/intel/bd82x6x/nvs.h> +#include "thermal.h" + +static void acpi_update_thermal_table(global_nvs_t *gnvs) +{ + /* EC handles all active thermal and fan control on Parrot. */ + gnvs->tcrt = CRITICAL_TEMPERATURE; + gnvs->tpsv = PASSIVE_TEMPERATURE; +} + +static void acpi_create_gnvs(global_nvs_t *gnvs) +{ + memset((void *)gnvs, 0, sizeof(*gnvs)); + gnvs->apic = 1; + gnvs->mpen = 1; /* Enable Multi Processing */ + gnvs->pcnt = dev_count_cpu(); + + /* Disable USB ports in S3 by default */ + gnvs->s3u0 = 0; + gnvs->s3u1 = 0; + + /* Disable USB ports in S5 by default */ + gnvs->s5u0 = 0; + gnvs->s5u1 = 0; + + /* CBMEM TOC */ + gnvs->cmem = (u32)get_cbmem_toc(); + + /* IGD Displays */ + gnvs->ndid = 3; + gnvs->did[0] = 0x80000100; + gnvs->did[1] = 0x80000240; + gnvs->did[2] = 0x80000410; + gnvs->did[3] = 0x80000410; + gnvs->did[4] = 0x00000005; + +#if CONFIG_CHROMEOS + // TODO(reinauer) this could move elsewhere? + chromeos_init_vboot(&(gnvs->chromeos)); + + gnvs->chromeos.vbt2 = parrot_ec_running_ro() ? + ACTIVE_ECFW_RO : ACTIVE_ECFW_RW; +#endif + + acpi_update_thermal_table(gnvs); + + // the lid is open by default. + gnvs->lids = 1; +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* Local APICs */ + current = acpi_create_madt_lapics(current); + + /* IOAPIC */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + 2, IO_APIC_ADDR, 0); + + /* INT_SRC_OVR */ + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0); + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_HIGH); + + return current; +} + +unsigned long acpi_fill_ssdt_generator(unsigned long current, + const char *oem_table_id) +{ + generate_cpu_entries(); + return (unsigned long) (acpigen_get_current()); +} + +unsigned long acpi_fill_slit(unsigned long current) +{ + // Not implemented + return current; +} + +unsigned long acpi_fill_srat(unsigned long current) +{ + /* No NUMA, no SRAT */ + return current; +} + +#define ALIGN_CURRENT current = ((current + 0x0f) & -0x10) +unsigned long write_acpi_tables(unsigned long start) +{ + unsigned long current; + int i; + acpi_rsdp_t *rsdp; + acpi_rsdt_t *rsdt; + acpi_xsdt_t *xsdt; + acpi_hpet_t *hpet; + acpi_madt_t *madt; + acpi_mcfg_t *mcfg; + acpi_fadt_t *fadt; + acpi_facs_t *facs; +#if CONFIG_HAVE_ACPI_SLIC + acpi_header_t *slic; +#endif + acpi_header_t *ssdt; + acpi_header_t *dsdt; + + current = start; + + /* Align ACPI tables to 16byte */ + ALIGN_CURRENT; + + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx.\n", start); + + /* We need at least an RSDP and an RSDT Table */ + rsdp = (acpi_rsdp_t *) current; + current += sizeof(acpi_rsdp_t); + ALIGN_CURRENT; + rsdt = (acpi_rsdt_t *) current; + current += sizeof(acpi_rsdt_t); + ALIGN_CURRENT; + xsdt = (acpi_xsdt_t *) current; + current += sizeof(acpi_xsdt_t); + ALIGN_CURRENT; + + /* clear all table memory */ + memset((void *) start, 0, current - start); + + acpi_write_rsdp(rsdp, rsdt, xsdt); + acpi_write_rsdt(rsdt); + acpi_write_xsdt(xsdt); + + printk(BIOS_DEBUG, "ACPI: * FACS\n"); + facs = (acpi_facs_t *) current; + current += sizeof(acpi_facs_t); + ALIGN_CURRENT; + acpi_create_facs(facs); + + printk(BIOS_DEBUG, "ACPI: * DSDT\n"); + dsdt = (acpi_header_t *) current; + memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); + current += dsdt->length; + memcpy(dsdt, &AmlCode, dsdt->length); + + ALIGN_CURRENT; + + printk(BIOS_DEBUG, "ACPI: * FADT\n"); + fadt = (acpi_fadt_t *) current; + current += sizeof(acpi_fadt_t); + ALIGN_CURRENT; + + acpi_create_fadt(fadt, facs, dsdt); + acpi_add_table(rsdp, fadt); + + /* + * We explicitly add these tables later on: + */ + printk(BIOS_DEBUG, "ACPI: * HPET\n"); + + hpet = (acpi_hpet_t *) current; + current += sizeof(acpi_hpet_t); + ALIGN_CURRENT; + acpi_create_hpet(hpet); + acpi_add_table(rsdp, hpet); + + /* If we want to use HPET Timers Linux wants an MADT */ + printk(BIOS_DEBUG, "ACPI: * MADT\n"); + + madt = (acpi_madt_t *) current; + acpi_create_madt(madt); + current += madt->header.length; + ALIGN_CURRENT; + acpi_add_table(rsdp, madt); + + printk(BIOS_DEBUG, "ACPI: * MCFG\n"); + mcfg = (acpi_mcfg_t *) current; + acpi_create_mcfg(mcfg); + current += mcfg->header.length; + ALIGN_CURRENT; + acpi_add_table(rsdp, mcfg); + + /* Pack GNVS into the ACPI table area */ + for (i=0; i < dsdt->length; i++) { + if (*(u32*)(((u32)dsdt) + i) == 0xC0DEBABE) { + printk(BIOS_DEBUG, "ACPI: Patching up global NVS in " + "DSDT at offset 0x%04x -> 0x%08lx\n", i, current); + *(u32*)(((u32)dsdt) + i) = current; // 0x92 bytes + acpi_save_gnvs(current); + break; + } + } + + /* And fill it */ + acpi_create_gnvs((global_nvs_t *)current); + + /* And tell SMI about it */ + smm_setup_structures((void *)current, NULL, NULL); + + current += sizeof(global_nvs_t); + ALIGN_CURRENT; + + /* We patched up the DSDT, so we need to recalculate the checksum */ + dsdt->checksum = 0; + dsdt->checksum = acpi_checksum((void *)dsdt, dsdt->length); + + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n", dsdt, + dsdt->length); + +#if CONFIG_HAVE_ACPI_SLIC + printk(BIOS_DEBUG, "ACPI: * SLIC\n"); + slic = (acpi_header_t *)current; + current += acpi_create_slic(current); + ALIGN_CURRENT; + acpi_add_table(rsdp, slic); +#endif + + printk(BIOS_DEBUG, "ACPI: * SSDT\n"); + ssdt = (acpi_header_t *)current; + acpi_create_ssdt_generator(ssdt, ACPI_TABLE_CREATOR); + current += ssdt->length; + acpi_add_table(rsdp, ssdt); + ALIGN_CURRENT; + + printk(BIOS_DEBUG, "current = %lx\n", current); + printk(BIOS_INFO, "ACPI: done.\n"); + return current; +} diff --git a/src/mainboard/google/parrot/chromeos.c b/src/mainboard/google/parrot/chromeos.c new file mode 100644 index 0000000000..d4054ef864 --- /dev/null +++ b/src/mainboard/google/parrot/chromeos.c @@ -0,0 +1,167 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011-2012 The ChromiumOS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <string.h> +#include <vendorcode/google/chromeos/chromeos.h> +#include <arch/io.h> + +#ifdef __PRE_RAM__ +#include <arch/romcc_io.h> +#else +#include <device/device.h> +#include <device/pci.h> +#endif + +#include <southbridge/intel/bd82x6x/pch.h> +#include <ec/compal/ene932/ec.h> +#include "ec.h" + +#define ACTIVE_LOW 0 +#define ACTIVE_HIGH 1 + +#ifndef __PRE_RAM__ +#include <boot/coreboot_tables.h> +#include <arch/coreboot_tables.h> + +#define GPIO_COUNT 6 + +void fill_lb_gpios(struct lb_gpios *gpios) +{ + device_t dev = dev_find_slot(0, PCI_DEVFN(0x1f,0)); + u16 gpio_base = pci_read_config32(dev, GPIOBASE) & 0xfffe; + u16 gen_pmcon_1 = pci_read_config32(dev, GEN_PMCON_1); + + if (!gpio_base) + return; + + u32 gp_lvl = inl(gpio_base + GP_LVL); + u32 gp_lvl3 = inl(gpio_base + GP_LVL3); + + gpios->size = sizeof(*gpios) + (GPIO_COUNT * sizeof(struct lb_gpio)); + gpios->count = GPIO_COUNT; + + /* Write Protect: GPIO70 active high */ + gpios->gpios[0].port = 70; + gpios->gpios[0].polarity = ACTIVE_LOW; + gpios->gpios[0].value = (gp_lvl3 >> (70 - 64)) & 1; + strncpy((char *)gpios->gpios[0].name,"write protect", GPIO_MAX_NAME_LENGTH); + + /* Recovery: Virtual GPIO in the EC (Servo GPIO68 active low) */ + gpios->gpios[1].port = -1; + gpios->gpios[1].polarity = ACTIVE_HIGH; + gpios->gpios[1].value = get_recovery_mode_switch(); + strncpy((char *)gpios->gpios[1].name,"recovery", GPIO_MAX_NAME_LENGTH); + + /* Developer: Virtual GPIO in the EC ( Servo GPIO17 active low) */ + gpios->gpios[2].port = -1; + gpios->gpios[2].polarity = ACTIVE_HIGH; + gpios->gpios[2].value = get_developer_mode_switch(); + strncpy((char *)gpios->gpios[2].name,"developer", GPIO_MAX_NAME_LENGTH); + + /* Lid switch GPIO active high (open). */ + gpios->gpios[3].port = 15; + gpios->gpios[3].polarity = ACTIVE_HIGH; + gpios->gpios[3].value = ((gp_lvl >> 15) & 1);; + strncpy((char *)gpios->gpios[3].name,"lid", GPIO_MAX_NAME_LENGTH); + + /* Power Button */ + gpios->gpios[4].port = 101; + gpios->gpios[4].polarity = ACTIVE_LOW; + gpios->gpios[4].value = (gen_pmcon_1 >> 9) & 1; + strncpy((char *)gpios->gpios[4].name,"power", GPIO_MAX_NAME_LENGTH); + + /* Did we load the VGA Option ROM? */ + gpios->gpios[5].port = -1; /* Indicate that this is a pseudo GPIO */ + gpios->gpios[5].polarity = ACTIVE_HIGH; + gpios->gpios[5].value = oprom_is_loaded; + strncpy((char *)gpios->gpios[5].name,"oprom", GPIO_MAX_NAME_LENGTH); + +} +#endif + + +int get_developer_mode_switch(void) +{ + device_t dev; +#ifdef __PRE_RAM__ + dev = PCI_DEV(0, 0x1f, 0); +#else + dev = dev_find_slot(0, PCI_DEVFN(0x1f,0)); +#endif + u16 gpio_base = pci_read_config32(dev, GPIOBASE) & 0xfffe; + + if (!gpio_base) + return(0); + +/* + * Dev mode is controled by EC and uboot stores a flag in TPM. This GPIO is only + * for the debug header. It is AND'd to the EC request. + */ + + u32 gp_lvl = inl(gpio_base + GP_LVL); + printk(BIOS_DEBUG,"DEV MODE GPIO 17: %x\n", !((gp_lvl >> 17) & 1)); + + /* GPIO17, active low -- return active high reading and let + * it be inverted by the caller if needed. */ + return !((gp_lvl >> 17) & 1); +} + +int get_recovery_mode_switch(void) +{ + u8 rec_mode; + + device_t dev; +#ifdef __PRE_RAM__ + dev = PCI_DEV(0, 0x1f, 0); +#else + dev = dev_find_slot(0, PCI_DEVFN(0x1f,0)); +#endif + u16 gpio_base = pci_read_config32(dev, GPIOBASE) & 0xfffe; + + if (!gpio_base) + return(0); + + /* GPIO68, active low. For Servo support + * Treat as active high and let the caller invert if needed. */ + u32 gp_lvl3 = inl(gpio_base + GP_LVL3); + rec_mode = !((gp_lvl3 >> (68 - 64)) & 1); + printk(BIOS_DEBUG,"REC MODE GPIO 68: %x\n", rec_mode); + + return (rec_mode); +} + +int parrot_ec_running_ro(void) +{ + device_t dev; +#ifdef __PRE_RAM__ + dev = PCI_DEV(0, 0x1f, 0); +#else + dev = dev_find_slot(0, PCI_DEVFN(0x1f,0)); +#endif + u16 gpio_base = pci_read_config32(dev, GPIOBASE) & 0xfffe; + + if (!gpio_base) + return(0); + + /* GPIO68 EC_RW is active low. + * Treat as active high and let the caller invert if needed. */ + u32 gp_lvl3 = inl(gpio_base + GP_LVL3); + return !((gp_lvl3 >> (68 - 64)) & 1); +} diff --git a/src/mainboard/google/parrot/cmos.layout b/src/mainboard/google/parrot/cmos.layout new file mode 100644 index 0000000000..afdd3c66ca --- /dev/null +++ b/src/mainboard/google/parrot/cmos.layout @@ -0,0 +1,139 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007-2008 coresystems GmbH +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +# ----------------------------------------------------------------- +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +# ----------------------------------------------------------------- +# Status Register A +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +# ----------------------------------------------------------------- +# Status Register B +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +# ----------------------------------------------------------------- +# Status Register C +#96 4 r 0 status_c_rsvd +#100 1 r 0 uf_flag +#101 1 r 0 af_flag +#102 1 r 0 pf_flag +#103 1 r 0 irqf_flag +# ----------------------------------------------------------------- +# Status Register D +#104 7 r 0 status_d_rsvd +#111 1 r 0 valid_cmos_ram +# ----------------------------------------------------------------- +# Diagnostic Status Register +#112 8 r 0 diag_rsvd1 + +# ----------------------------------------------------------------- +0 120 r 0 reserved_memory +#120 264 r 0 unused + +# ----------------------------------------------------------------- +# RTC_BOOT_BYTE (coreboot hardcoded) +384 1 e 4 boot_option +385 1 e 4 last_boot +388 4 r 0 reboot_bits +#390 2 r 0 unused? + +# ----------------------------------------------------------------- +# coreboot config options: console +392 3 e 5 baud_rate +395 4 e 6 debug_level +#399 1 r 0 unused + +# coreboot config options: cpu +400 1 e 2 hyper_threading +#401 7 r 0 unused + +# coreboot config options: southbridge +408 1 e 1 nmi +409 2 e 7 power_on_after_fail +#411 5 r 0 unused + +# coreboot config options: bootloader +#Used by ChromeOS: +416 128 r 0 vbnv +#544 440 r 0 unused + +# SandyBridge MRC Scrambler Seed values +896 32 r 0 mrc_scrambler_seed +928 32 r 0 mrc_scrambler_seed_s3 + +# coreboot config options: check sums +984 16 h 0 check_sum +#1000 24 r 0 amd_reserved + +# ----------------------------------------------------------------- + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 1 Emergency +6 2 Alert +6 3 Critical +6 4 Error +6 5 Warning +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Disable +7 1 Enable +7 2 Keep +# ----------------------------------------------------------------- +checksums + +checksum 392 415 984 + + diff --git a/src/mainboard/google/parrot/devicetree.cb b/src/mainboard/google/parrot/devicetree.cb new file mode 100644 index 0000000000..d93c021326 --- /dev/null +++ b/src/mainboard/google/parrot/devicetree.cb @@ -0,0 +1,105 @@ +chip northbridge/intel/sandybridge + + # Enable DisplayPort B Hotplug with 6ms pulse + register "gpu_dp_b_hotplug" = "0x06" + + # Enable Panel as eDP and configure power delays + register "gpu_panel_port_select" = "0" # LVDS + register "gpu_panel_power_cycle_delay" = "5" # 400ms + register "gpu_panel_power_up_delay" = "500" # 50ms + register "gpu_panel_power_down_delay" = "150" # 15ms + register "gpu_panel_power_backlight_on_delay" = "2100" # 210ms + register "gpu_panel_power_backlight_off_delay" = "2100" # 210ms + + # Set backlight PWM values + register "gpu_cpu_backlight" = "0x000001d4" + register "gpu_pch_backlight" = "0x03aa0000" + + device lapic_cluster 0 on + chip cpu/intel/socket_rPGA989 + device lapic 0 on end + end + chip cpu/intel/model_206ax + # Magic APIC ID to locate this chip + device lapic 0xACAC off end + + # Coordinate with HW_ALL + register "pstate_coord_type" = "0xfe" + + register "c1_acpower" = "1" # ACPI(C1) = MWAIT(C1) + register "c2_acpower" = "3" # ACPI(C2) = MWAIT(C3) + register "c3_acpower" = "5" # ACPI(C3) = MWAIT(C7) + + register "c1_battery" = "1" # ACPI(C1) = MWAIT(C1) + register "c2_battery" = "3" # ACPI(C2) = MWAIT(C3) + register "c3_battery" = "5" # ACPI(C3) = MWAIT(C7) + end + end + + device pci_domain 0 on + device pci 00.0 on end # host bridge + device pci 02.0 on end # vga controller + + chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH + register "pirqa_routing" = "0x8b" + register "pirqb_routing" = "0x8a" + register "pirqc_routing" = "0x8b" + register "pirqd_routing" = "0x8b" + register "pirqe_routing" = "0x8b" + register "pirqf_routing" = "0x80" + register "pirqg_routing" = "0x80" + register "pirqh_routing" = "0x80" + + # GPI routing + # 0 No effect (default) + # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) + # 2 SCI (if corresponding GPIO_EN bit is also set) + # Set Lid Switch to SMI to capture in recovery mode. It gets reset to + # SCI mode when we go to ACPI mode. + register "alt_gp_smi_en" = "0x8100" + register "gpi7_routing" = "2" + register "gpi8_routing" = "1" + register "gpi15_routing" = "1" #lid switch gpe + + register "ide_legacy_combined" = "0x0" + register "sata_ahci" = "0x1" + register "sata_port_map" = "0x1" + + # EC range is 0xFD60 (EC_IO) and 0x68/0x6C + register "gen1_dec" = "0x0004fd61" + register "gen2_dec" = "0x00040069" + + # Enable zero-based linear PCIe root port functions + register "pcie_port_coalesce" = "1" + + device pci 16.0 on end # Management Engine Interface 1 + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT + device pci 19.0 off end # Intel Gigabit Ethernet + device pci 1a.0 on end # USB2 EHCI #2 + device pci 1b.0 on end # High Definition Audio + device pci 1c.0 off end # PCIe Port #1 + device pci 1c.1 on end # PCIe Port #2 (WLAN) + device pci 1c.2 on end # PCIe Port #3 (ETH0) + device pci 1c.3 off end # PCIe Port #4 + device pci 1c.4 off end # PCIe Port #5 + device pci 1c.5 off end # PCIe Port #6 + device pci 1c.6 off end # PCIe Port #7 + device pci 1c.7 off end # PCIe Port #8 + device pci 1d.0 on end # USB2 EHCI #1 + device pci 1e.0 off end # PCI bridge + device pci 1f.0 on + chip ec/compal/ene932 + # 60/64 KBC + device pnp ff.1 on # dummy address + end + end + end # LPC bridge + device pci 1f.2 on end # SATA Controller 1 + device pci 1f.3 on end # SMBus + device pci 1f.5 off end # SATA Controller 2 + device pci 1f.6 on end # Thermal + end + end +end diff --git a/src/mainboard/google/parrot/dsdt.asl b/src/mainboard/google/parrot/dsdt.asl new file mode 100644 index 0000000000..608827aac1 --- /dev/null +++ b/src/mainboard/google/parrot/dsdt.asl @@ -0,0 +1,57 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +DefinitionBlock( + "dsdt.aml", + "DSDT", + 0x02, // DSDT revision: ACPI v2.0 + "COREv4", // OEM id + "COREBOOT", // OEM table id + 0x20110725 // OEM revision +) +{ + // Some generic macros + #include "acpi/platform.asl" + #include "acpi/mainboard.asl" + + // global NVS and variables + #include <southbridge/intel/bd82x6x/acpi/globalnvs.asl> + + // General Purpose Events + //#include "acpi/gpe.asl" + + #include "acpi/thermal.asl" + + #include <cpu/intel/model_206ax/acpi/cpu.asl> + + Scope (\_SB) { + Device (PCI0) + { + #include <northbridge/intel/sandybridge/acpi/sandybridge.asl> + #include <southbridge/intel/bd82x6x/acpi/pch.asl> + } + } + + #include "acpi/chromeos.asl" + #include <vendorcode/google/chromeos/acpi/chromeos.asl> + + /* Chipset specific sleep states */ + #include <southbridge/intel/bd82x6x/acpi/sleepstates.asl> +} diff --git a/src/mainboard/google/parrot/ec.c b/src/mainboard/google/parrot/ec.c new file mode 100644 index 0000000000..e6d2d38b13 --- /dev/null +++ b/src/mainboard/google/parrot/ec.c @@ -0,0 +1,82 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/acpi.h> +#include <vendorcode/google/chromeos/chromeos.h> +#include <types.h> +#include <console/console.h> +#include <device/device.h> +#include <arch/io.h> +#include <ec/compal/ene932/ec.h> +#include "ec.h" + + +void parrot_ec_init(void) +{ + printk(BIOS_DEBUG, "Parrot EC Init\n"); + + /* Clean up the buffers. We don't know the initial condition. */ + kbc_cleanup_buffers(); + + /* Report EC info */ + /* EC version: cmd 0x51 - returns three bytes */ + ec_kbc_write_cmd(0x51); + printk(BIOS_DEBUG," EC version %x.%x.%x\n", + ec_kbc_read_ob(), ec_kbc_read_ob(), ec_kbc_read_ob()); + + /* EC Project name: cmd 0x52, 0xA0 - returns five bytes */ + ec_kbc_write_cmd(0x52); + ec_kbc_write_ib(0xA0); + printk(BIOS_DEBUG," EC Project: %c%c%c%c%c\n", + ec_kbc_read_ob(),ec_kbc_read_ob(),ec_kbc_read_ob(), + ec_kbc_read_ob(), ec_kbc_read_ob()); + + /* Print the hardware revision */ + printk(BIOS_DEBUG," Parrot Revision %x\n", parrot_rev()); + + /* US Keyboard */ + ec_kbc_write_cmd(0x59); + ec_kbc_write_ib(0xE5); + + /* Enable IRQ1 */ + ec_kbc_write_cmd(0x59); + ec_kbc_write_ib(0xD1); + + /* TODO - Do device detection and device maintain state (nvs) */ + /* Enable Wireless and Bluetooth */ + ec_kbc_write_cmd(0x45); + ec_kbc_write_ib(0xAD); + + /* Set Wireless and Bluetooth Available */ + ec_kbc_write_cmd(0x45); + ec_kbc_write_ib(0xA8); + + /* Set Wireless and Bluetooth Enable */ + ec_kbc_write_cmd(0x45); + ec_kbc_write_ib(0xA2); +} + + +/* Parrot Hardware Revision */ +u8 parrot_rev(void) +{ + ec_kbc_write_cmd(0x45); + ec_kbc_write_ib(0x40); + return ec_kbc_read_ob(); +} diff --git a/src/mainboard/google/parrot/ec.h b/src/mainboard/google/parrot/ec.h new file mode 100644 index 0000000000..5245920ec1 --- /dev/null +++ b/src/mainboard/google/parrot/ec.h @@ -0,0 +1,66 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef PARROT_EC_H +#define PARROT_EC_H + +#define EC_SCI_GPI 7 /* GPIO7 is EC_SCI# */ +#define EC_SMI_GPI 8 /* GPIO8 is EC_SMI# */ +#define EC_LID_GPI 15 /* GPIO15 is EC_LID_OUT# */ + +/* EC SMI sources TODO - make defines + * No event 80h +*/ +#define EC_NO_EVENT 0x80 +/* + * DTS temperature update A0h + * Decrease brightness event A1h + * Increase brightness event A2h + * Lid open A5h + * Lid closed A6h + */ +#define EC_LID_CLOSE 0xA6 + /* Bluetooth wake up event A9h + * Display change (LCD , CRT) ACh + * Cpu fast event ADh + * Cpu slow event ADh + * Battery life in critical low state (LLB) B2h + */ +#define EC_BATTERY_CRITICAL 0xB2 +/* + * Battery life in low power state (LB) B3h + * Battery Plug-In B5h + * Docked in request BAh + * Undock request BBh + * Power button pressed C2h + * AC power plug-in C7h + * AC power plug-out C8h + * Modem Ring In CAh + * PME signal active CEh + * Acer Hotkey Function – Make event D5h + * Acer Hotkey Function – Break event D6h + */ + +#ifndef __ACPI__ +extern void parrot_ec_init(void); +u8 parrot_rev(void); +int parrot_ec_running_ro(void); +#endif + +#endif // PARROT_EC_H diff --git a/src/mainboard/google/parrot/fadt.c b/src/mainboard/google/parrot/fadt.c new file mode 100644 index 0000000000..5ce9ab11db --- /dev/null +++ b/src/mainboard/google/parrot/fadt.c @@ -0,0 +1,166 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <string.h> +#include <device/pci.h> +#include <arch/acpi.h> + +/* FIXME: This needs to go into a separate .h file + * to be included by the ich7 smi handler, ich7 smi init + * code and the mainboard fadt. + */ +#define APM_CNT 0xb2 +#define CST_CONTROL 0x85 +#define PST_CONTROL 0x80 +#define ACPI_DISABLE 0x1e +#define ACPI_ENABLE 0xe1 +#define GNVS_UPDATE 0xea + +void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) +{ + acpi_header_t *header = &(fadt->header); + u16 pmbase = pci_read_config16(dev_find_slot(0, PCI_DEVFN(0x1f,0)), + 0x40) & 0xfffe; + + memset((void *) fadt, 0, sizeof(acpi_fadt_t)); + memcpy(header->signature, "FACP", 4); + header->length = sizeof(acpi_fadt_t); + header->revision = 3; + memcpy(header->oem_id, OEM_ID, 6); + memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); + memcpy(header->asl_compiler_id, "CORE", 4); + header->asl_compiler_revision = 1; + + fadt->firmware_ctrl = (unsigned long) facs; + fadt->dsdt = (unsigned long) dsdt; + fadt->model = 1; + fadt->preferred_pm_profile = PM_DESKTOP; + + fadt->sci_int = 0x9; + fadt->smi_cmd = APM_CNT; + fadt->acpi_enable = ACPI_ENABLE; + fadt->acpi_disable = ACPI_DISABLE; + fadt->s4bios_req = 0x0; + fadt->pstate_cnt = 0; + + fadt->pm1a_evt_blk = pmbase; + fadt->pm1b_evt_blk = 0x0; + fadt->pm1a_cnt_blk = pmbase + 0x4; + fadt->pm1b_cnt_blk = 0x0; + fadt->pm2_cnt_blk = pmbase + 0x50; + fadt->pm_tmr_blk = pmbase + 0x8; + fadt->gpe0_blk = pmbase + 0x20; + fadt->gpe1_blk = 0; + + fadt->pm1_evt_len = 4; + fadt->pm1_cnt_len = 2; + fadt->pm2_cnt_len = 1; + fadt->pm_tmr_len = 4; + fadt->gpe0_blk_len = 16; + fadt->gpe1_blk_len = 0; + fadt->gpe1_base = 0; + fadt->cst_cnt = 0; + fadt->p_lvl2_lat = 1; + fadt->p_lvl3_lat = 87; + fadt->flush_size = 1024; + fadt->flush_stride = 16; + fadt->duty_offset = 1; + fadt->duty_width = 0; + fadt->day_alrm = 0xd; + fadt->mon_alrm = 0x00; + fadt->century = 0x00; + fadt->iapc_boot_arch = ACPI_FADT_LEGACY_DEVICES | ACPI_FADT_8042; + + fadt->flags = ACPI_FADT_WBINVD | ACPI_FADT_C1_SUPPORTED | + ACPI_FADT_C2_MP_SUPPORTED | ACPI_FADT_SLEEP_BUTTON | + ACPI_FADT_RESET_REGISTER | ACPI_FADT_SEALED_CASE | + ACPI_FADT_S4_RTC_WAKE | ACPI_FADT_PLATFORM_CLOCK; + + fadt->reset_reg.space_id = 1; + fadt->reset_reg.bit_width = 8; + fadt->reset_reg.bit_offset = 0; + fadt->reset_reg.resv = 0; + fadt->reset_reg.addrl = 0xcf9; + fadt->reset_reg.addrh = 0; + + fadt->reset_value = 6; + fadt->x_firmware_ctl_l = (unsigned long)facs; + fadt->x_firmware_ctl_h = 0; + fadt->x_dsdt_l = (unsigned long)dsdt; + fadt->x_dsdt_h = 0; + + fadt->x_pm1a_evt_blk.space_id = 1; + fadt->x_pm1a_evt_blk.bit_width = 32; + fadt->x_pm1a_evt_blk.bit_offset = 0; + fadt->x_pm1a_evt_blk.resv = 0; + fadt->x_pm1a_evt_blk.addrl = pmbase; + fadt->x_pm1a_evt_blk.addrh = 0x0; + + fadt->x_pm1b_evt_blk.space_id = 1; + fadt->x_pm1b_evt_blk.bit_width = 0; + fadt->x_pm1b_evt_blk.bit_offset = 0; + fadt->x_pm1b_evt_blk.resv = 0; + fadt->x_pm1b_evt_blk.addrl = 0x0; + fadt->x_pm1b_evt_blk.addrh = 0x0; + + fadt->x_pm1a_cnt_blk.space_id = 1; + fadt->x_pm1a_cnt_blk.bit_width = 16; + fadt->x_pm1a_cnt_blk.bit_offset = 0; + fadt->x_pm1a_cnt_blk.resv = 0; + fadt->x_pm1a_cnt_blk.addrl = pmbase + 0x4; + fadt->x_pm1a_cnt_blk.addrh = 0x0; + + fadt->x_pm1b_cnt_blk.space_id = 1; + fadt->x_pm1b_cnt_blk.bit_width = 0; + fadt->x_pm1b_cnt_blk.bit_offset = 0; + fadt->x_pm1b_cnt_blk.resv = 0; + fadt->x_pm1b_cnt_blk.addrl = 0x0; + fadt->x_pm1b_cnt_blk.addrh = 0x0; + + fadt->x_pm2_cnt_blk.space_id = 1; + fadt->x_pm2_cnt_blk.bit_width = 8; + fadt->x_pm2_cnt_blk.bit_offset = 0; + fadt->x_pm2_cnt_blk.resv = 0; + fadt->x_pm2_cnt_blk.addrl = pmbase + 0x50; + fadt->x_pm2_cnt_blk.addrh = 0x0; + + fadt->x_pm_tmr_blk.space_id = 1; + fadt->x_pm_tmr_blk.bit_width = 32; + fadt->x_pm_tmr_blk.bit_offset = 0; + fadt->x_pm_tmr_blk.resv = 0; + fadt->x_pm_tmr_blk.addrl = pmbase + 0x8; + fadt->x_pm_tmr_blk.addrh = 0x0; + + fadt->x_gpe0_blk.space_id = 1; + fadt->x_gpe0_blk.bit_width = 64; + fadt->x_gpe0_blk.bit_offset = 0; + fadt->x_gpe0_blk.resv = 0; + fadt->x_gpe0_blk.addrl = pmbase + 0x20; + fadt->x_gpe0_blk.addrh = 0x0; + + fadt->x_gpe1_blk.space_id = 1; + fadt->x_gpe1_blk.bit_width = 0; + fadt->x_gpe1_blk.bit_offset = 0; + fadt->x_gpe1_blk.resv = 0; + fadt->x_gpe1_blk.addrl = 0x0; + fadt->x_gpe1_blk.addrh = 0x0; + + header->checksum = + acpi_checksum((void *) fadt, header->length); +} diff --git a/src/mainboard/google/parrot/gpio.h b/src/mainboard/google/parrot/gpio.h new file mode 100644 index 0000000000..a9eb99b93b --- /dev/null +++ b/src/mainboard/google/parrot/gpio.h @@ -0,0 +1,279 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef PARROT_GPIO_H +#define PARROT_GPIO_H + +#include "southbridge/intel/bd82x6x/gpio.h" + +const struct pch_gpio_set1 pch_gpio_set1_mode = { + .gpio0 = GPIO_MODE_NONE, /* NOT USED */ + .gpio1 = GPIO_MODE_NONE, /* NOT USED */ + .gpio2 = GPIO_MODE_NATIVE, /* NOT USED / PIRQE# */ + .gpio3 = GPIO_MODE_NONE, /* NOT USED / PIRQ#F */ + .gpio4 = GPIO_MODE_NONE, /* NOT USED / PIRQG# */ + .gpio5 = GPIO_MODE_NONE, /* NOT USED / PIRQH# */ + .gpio6 = GPIO_MODE_NONE, /* NOT USED / FAN TACH2 */ + .gpio7 = GPIO_MODE_GPIO, /* EC_SCI# */ + .gpio8 = GPIO_MODE_GPIO, /* EC SMI# */ + .gpio9 = GPIO_MODE_NATIVE, /* NOT USED / OC5# USB */ + .gpio10 = GPIO_MODE_NATIVE, /* NOT USED / OC6# USB */ + .gpio11 = GPIO_MODE_NONE, /* NOT USED / SMB_ALERT*/ + .gpio12 = GPIO_MODE_GPIO, /* Track Pad IRQ / LAN_PHY_PWR_CTRL / SMB_ALERT */ + .gpio13 = GPIO_MODE_NONE, /* NOT USED / HDA_DOCK_RST */ + .gpio14 = GPIO_MODE_NATIVE, /* NOT USED / OC7# USB */ + .gpio15 = GPIO_MODE_GPIO, /* EC_LID_OUT (INPUT to PantherPoint) */ + .gpio16 = GPIO_MODE_NONE, /* NOT USED / SATA4GP */ + .gpio17 = GPIO_MODE_GPIO, /* DEV MODE */ + .gpio18 = GPIO_MODE_NATIVE, /* PCIECLKRQ1# */ + .gpio19 = GPIO_MODE_NONE, /* BIOS BOOT STRAP (NOT USED)/ SATA1GP */ + .gpio20 = GPIO_MODE_NONE, /* NOT USED / PCIECLKRQ2# */ + .gpio21 = GPIO_MODE_NONE, /* NOT USED / SATA0GP */ + .gpio22 = GPIO_MODE_NONE, /* NOT USED */ + .gpio23 = GPIO_MODE_NONE, /* NOT USED */ + .gpio24 = GPIO_MODE_NONE, /* NOT USED / MEM_LED */ + .gpio25 = GPIO_MODE_NATIVE, /* PCIECLKRQ3# */ + .gpio26 = GPIO_MODE_NONE, /* NOT USED / PCIECLKRQ4# */ + .gpio27 = GPIO_MODE_NONE, /* S4,S5 WAKE? */ + .gpio28 = GPIO_MODE_NONE, /* On-Die PLL Voltage Regulator */ + .gpio29 = GPIO_MODE_NONE, /* NOT USED / SLP_LAN# */ + .gpio30 = GPIO_MODE_NATIVE, /* SUS_WARN# */ + .gpio31 = GPIO_MODE_NATIVE, /* ACPRESENT */ +}; + +const struct pch_gpio_set1 pch_gpio_set1_direction = { + .gpio0 = GPIO_DIR_INPUT, + .gpio1 = GPIO_DIR_INPUT, + .gpio2 = GPIO_DIR_INPUT, + .gpio3 = GPIO_DIR_INPUT, + .gpio4 = GPIO_DIR_INPUT, + .gpio5 = GPIO_DIR_INPUT, + .gpio6 = GPIO_DIR_INPUT, + .gpio7 = GPIO_DIR_INPUT, + .gpio8 = GPIO_DIR_INPUT, + .gpio9 = GPIO_DIR_INPUT, + .gpio10 = GPIO_DIR_INPUT, + .gpio11 = GPIO_DIR_INPUT, + .gpio12 = GPIO_DIR_INPUT, + .gpio13 = GPIO_DIR_INPUT, + .gpio14 = GPIO_DIR_INPUT, + .gpio15 = GPIO_DIR_INPUT, + .gpio16 = GPIO_DIR_INPUT, + .gpio17 = GPIO_DIR_INPUT, + .gpio18 = GPIO_DIR_INPUT, + .gpio19 = GPIO_DIR_INPUT, + .gpio20 = GPIO_DIR_INPUT, + .gpio21 = GPIO_DIR_INPUT, + .gpio22 = GPIO_DIR_INPUT, + .gpio23 = GPIO_DIR_INPUT, + .gpio24 = GPIO_DIR_INPUT, + .gpio25 = GPIO_DIR_INPUT, + .gpio26 = GPIO_DIR_INPUT, + .gpio27 = GPIO_DIR_INPUT, + .gpio28 = GPIO_DIR_INPUT, + .gpio29 = GPIO_DIR_INPUT, + .gpio30 = GPIO_DIR_OUTPUT, + .gpio31 = GPIO_DIR_INPUT, +}; + +const struct pch_gpio_set1 pch_gpio_set1_level = { + .gpio0 = GPIO_LEVEL_LOW, + .gpio1 = GPIO_LEVEL_LOW, + .gpio2 = GPIO_LEVEL_LOW, + .gpio3 = GPIO_LEVEL_LOW, + .gpio4 = GPIO_LEVEL_LOW, + .gpio5 = GPIO_LEVEL_LOW, + .gpio6 = GPIO_LEVEL_LOW, + .gpio7 = GPIO_LEVEL_LOW, + .gpio8 = GPIO_LEVEL_LOW, + .gpio9 = GPIO_LEVEL_LOW, + .gpio10 = GPIO_LEVEL_LOW, + .gpio11 = GPIO_LEVEL_LOW, + .gpio12 = GPIO_LEVEL_LOW, + .gpio13 = GPIO_LEVEL_LOW, + .gpio14 = GPIO_LEVEL_LOW, + .gpio15 = GPIO_LEVEL_LOW, + .gpio16 = GPIO_LEVEL_LOW, + .gpio17 = GPIO_LEVEL_LOW, + .gpio18 = GPIO_LEVEL_LOW, + .gpio19 = GPIO_LEVEL_LOW, + .gpio20 = GPIO_LEVEL_LOW, + .gpio21 = GPIO_LEVEL_LOW, + .gpio22 = GPIO_LEVEL_LOW, + .gpio23 = GPIO_LEVEL_LOW, + .gpio24 = GPIO_LEVEL_LOW, + .gpio25 = GPIO_LEVEL_LOW, + .gpio26 = GPIO_LEVEL_LOW, + .gpio27 = GPIO_LEVEL_LOW, + .gpio28 = GPIO_LEVEL_LOW, + .gpio29 = GPIO_LEVEL_LOW, + .gpio30 = GPIO_LEVEL_LOW, + .gpio31 = GPIO_LEVEL_LOW, +}; + +const struct pch_gpio_set1 pch_gpio_set1_invert = { + .gpio7 = GPIO_INVERT, + .gpio8 = GPIO_INVERT, + .gpio12 = GPIO_INVERT, + .gpio15 = GPIO_INVERT, +}; + +const struct pch_gpio_set2 pch_gpio_set2_mode = { + .gpio36 = GPIO_MODE_GPIO, /* W_DISABLE_L */ + .gpio41 = GPIO_MODE_GPIO, /* SPD vector D0 */ + .gpio42 = GPIO_MODE_GPIO, /* SPD vector D1 */ + .gpio43 = GPIO_MODE_GPIO, /* SPD vector D2 */ + .gpio57 = GPIO_MODE_GPIO, /* PCH_SPI_WP_D */ + .gpio60 = GPIO_MODE_GPIO, /* DRAMRST_CNTRL_PCH */ +}; + +const struct pch_gpio_set2 pch_gpio_set2_direction = { + .gpio32 = GPIO_DIR_INPUT, + .gpio33 = GPIO_DIR_INPUT, + .gpio34 = GPIO_DIR_INPUT, + .gpio35 = GPIO_DIR_INPUT, + .gpio36 = GPIO_DIR_INPUT, + .gpio37 = GPIO_DIR_INPUT, + .gpio38 = GPIO_DIR_INPUT, + .gpio39 = GPIO_DIR_INPUT, + .gpio40 = GPIO_DIR_INPUT, + .gpio41 = GPIO_DIR_INPUT, + .gpio42 = GPIO_DIR_INPUT, + .gpio43 = GPIO_DIR_INPUT, + .gpio44 = GPIO_DIR_INPUT, + .gpio45 = GPIO_DIR_INPUT, + .gpio46 = GPIO_DIR_INPUT, + .gpio47 = GPIO_DIR_INPUT, + .gpio48 = GPIO_DIR_INPUT, + .gpio49 = GPIO_DIR_INPUT, + .gpio50 = GPIO_DIR_INPUT, + .gpio51 = GPIO_DIR_INPUT, + .gpio52 = GPIO_DIR_INPUT, + .gpio53 = GPIO_DIR_INPUT, + .gpio54 = GPIO_DIR_INPUT, + .gpio55 = GPIO_DIR_INPUT, + .gpio56 = GPIO_DIR_INPUT, + .gpio57 = GPIO_DIR_INPUT, + .gpio58 = GPIO_DIR_INPUT, + .gpio59 = GPIO_DIR_INPUT, + .gpio60 = GPIO_DIR_INPUT, + .gpio61 = GPIO_DIR_INPUT, + .gpio62 = GPIO_DIR_INPUT, + .gpio63 = GPIO_DIR_INPUT, +}; + +const struct pch_gpio_set2 pch_gpio_set2_level = { + .gpio32 = GPIO_LEVEL_LOW, + .gpio33 = GPIO_LEVEL_LOW, + .gpio34 = GPIO_LEVEL_LOW, + .gpio35 = GPIO_LEVEL_LOW, + .gpio36 = GPIO_LEVEL_LOW, + .gpio37 = GPIO_LEVEL_LOW, + .gpio38 = GPIO_LEVEL_LOW, + .gpio39 = GPIO_LEVEL_LOW, + .gpio40 = GPIO_LEVEL_LOW, + .gpio41 = GPIO_LEVEL_LOW, + .gpio42 = GPIO_LEVEL_LOW, + .gpio43 = GPIO_LEVEL_LOW, + .gpio44 = GPIO_LEVEL_LOW, + .gpio45 = GPIO_LEVEL_LOW, + .gpio46 = GPIO_LEVEL_LOW, + .gpio47 = GPIO_LEVEL_LOW, + .gpio48 = GPIO_LEVEL_LOW, + .gpio49 = GPIO_LEVEL_LOW, + .gpio50 = GPIO_LEVEL_LOW, + .gpio51 = GPIO_LEVEL_LOW, + .gpio52 = GPIO_LEVEL_LOW, + .gpio53 = GPIO_LEVEL_LOW, + .gpio54 = GPIO_LEVEL_LOW, + .gpio55 = GPIO_LEVEL_LOW, + .gpio56 = GPIO_LEVEL_LOW, + .gpio57 = GPIO_LEVEL_LOW, + .gpio58 = GPIO_LEVEL_LOW, + .gpio59 = GPIO_LEVEL_LOW, + .gpio60 = GPIO_LEVEL_LOW, + .gpio61 = GPIO_LEVEL_LOW, + .gpio62 = GPIO_LEVEL_LOW, + .gpio63 = GPIO_LEVEL_LOW, +}; + +const struct pch_gpio_set3 pch_gpio_set3_mode = { + .gpio64 = GPIO_MODE_NONE, /* NOT USED / CLK_FLEX0 */ + .gpio65 = GPIO_MODE_NONE, /* NOT USED / CLK_FLEX1 */ + .gpio66 = GPIO_MODE_NONE, /* NOT USED / CLK_FLEX2 */ + .gpio67 = GPIO_MODE_NONE, /* NOT USED / CLK_FLEX3 */ + .gpio68 = GPIO_MODE_NONE, /* NOT USED / FAN TACK4 */ + .gpio69 = GPIO_MODE_GPIO, /* REC_MODE_L / FAN TACK5 */ + .gpio70 = GPIO_MODE_GPIO, /* SPI_WP1#_RPCH / FAN TACK7 */ + .gpio71 = GPIO_MODE_GPIO, /* LVDS/eDP / FAN TACK8 */ + .gpio72 = GPIO_MODE_NONE, /* NOT USED / BATLOW# */ + .gpio73 = GPIO_MODE_NONE, /* NOT USED / PCIECLKRQ0#*/ + .gpio74 = GPIO_MODE_NONE, /* NOT USED / SML1ALERT# /PCHHOT# */ + .gpio75 = GPIO_MODE_NATIVE, /* SML1DATA */ +}; + +const struct pch_gpio_set3 pch_gpio_set3_direction = { + .gpio64 = GPIO_DIR_INPUT, + .gpio65 = GPIO_DIR_INPUT, + .gpio66 = GPIO_DIR_INPUT, + .gpio67 = GPIO_DIR_INPUT, + .gpio68 = GPIO_DIR_INPUT, + .gpio69 = GPIO_DIR_INPUT, + .gpio70 = GPIO_DIR_INPUT, + .gpio71 = GPIO_DIR_INPUT, + .gpio72 = GPIO_DIR_INPUT, + .gpio73 = GPIO_DIR_INPUT, + .gpio74 = GPIO_DIR_INPUT, + .gpio75 = GPIO_DIR_INPUT, +}; + +const struct pch_gpio_set3 pch_gpio_set3_level = { + .gpio64 = GPIO_LEVEL_LOW, + .gpio65 = GPIO_LEVEL_LOW, + .gpio66 = GPIO_LEVEL_LOW, + .gpio67 = GPIO_LEVEL_LOW, + .gpio68 = GPIO_LEVEL_LOW, + .gpio69 = GPIO_LEVEL_LOW, + .gpio70 = GPIO_LEVEL_LOW, + .gpio71 = GPIO_LEVEL_LOW, + .gpio72 = GPIO_LEVEL_LOW, + .gpio73 = GPIO_LEVEL_LOW, + .gpio74 = GPIO_LEVEL_LOW, + .gpio75 = GPIO_LEVEL_LOW, +}; + +const struct pch_gpio_map parrot_gpio_map = { + .set1 = { + .mode = &pch_gpio_set1_mode, + .direction = &pch_gpio_set1_direction, + .level = &pch_gpio_set1_level, + .invert = &pch_gpio_set1_invert, + }, + .set2 = { + .mode = &pch_gpio_set2_mode, + .direction = &pch_gpio_set2_direction, + .level = &pch_gpio_set2_level, + }, + .set3 = { + .mode = &pch_gpio_set3_mode, + .direction = &pch_gpio_set3_direction, + .level = &pch_gpio_set3_level, + }, +}; +#endif diff --git a/src/mainboard/google/parrot/hda_verb.h b/src/mainboard/google/parrot/hda_verb.h new file mode 100644 index 0000000000..18d42c2eed --- /dev/null +++ b/src/mainboard/google/parrot/hda_verb.h @@ -0,0 +1,169 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* + * Parrot audio ports: + * ALC269: + * out: + * Internal Speaker: PORT D (0x14) + * Headphone: PORT A - (0x21) (SenseA) + * + * in: + * Mic2: PORT F (0x19) (SenseB) + * Line2 (internal Mic): PORT E (0x1B) + * PCBeep + * + * HDMI PatherPoint + */ + +static const u32 mainboard_cim_verb_data[] = { + /* coreboot specific header */ + 0x10ec0269, // Codec Vendor / Device ID: Realtek ALC269 + 0x10250742, // Subsystem ID + 0x0000000E, // Number of jacks (NID entries) + + + /* NID 0x01, HDA Codec Subsystem ID Verb Table: 0x10250742 */ + 0x00172042, + 0x00172107, + 0x00172225, + 0x00172310, + + /* Pin Widget Verb Table */ + + /* Pin Complex (NID 0x12) DMIC */ + 0x01271cf0, + 0x01271d11, + 0x01271e11, + 0x01271f41, + + /* Pin Complex (NID 0x14) SPKR-OUT PORTD */ + 0x01471c10, // group 1, front left/right + 0x01471d01, // no connector, no jack detect + 0x01471e17, // speaker out, analog + 0x01471f90, // fixed function, internal + + /* Pin Complex (NID 0x17) */ + 0x01771cf0, + 0x01771d11, + 0x01771e11, + 0x01771f41, + + /* Pin Complex (NID 0x18) MIC1 PORTB */ + 0x01871cf0, + 0x01871d11, + 0x01871e11, + 0x01871f41, + + /* Pin Complex (NID 0x19) MIC2 PORTF */ + 0x01971c21, // group 2, cap 1 + 0x01971d10, // black, jack detect + 0x01971ea7, // mic in, analog + 0x01971f04, // connector, right panel + + /* Pin Complex (NID 0x1A) LINE1 PORTC */ + 0x01a71cf0, + 0x01a71d11, + 0x01a71e11, + 0x01a71f41, + + /* Pin Complex (NID 0x1B) LINE2 PORTE */ + 0x01b71c20, // group 2, cap 0 + 0x01b71d01, // no connector, no jack detect + 0x01b71ea7, // mic in, analog + 0x01b71f90, // fixed function, internal + + /* Pin Complex (NID 0x1d) PCBeep */ + 0x01d71c2d, // eapd low on ex-amp, laptop, custom enable + 0x01d71d81, // mute spkr on hpout + 0x01d71e15, // pcbeep en able, checksum + 0x01d71f40, // no physical, internal + + /* Pin Complex (NID 0x1E) SPDIF-OUT */ + 0x01e71cf0, + 0x01e71d11, + 0x01e71e11, + 0x01e71f41, + + /* Pin Complex (NID 0x21) HPOUT PORTA? */ + 0x02171c1f, // group1, + 0x02171d10, // black, jack detect + 0x02171e21, // HPOut, 1/8 stereo + 0x02171f04, // connector, right panel + + /* Undocumented speaker output volume settings from Compal and Realtek */ + /* Widget node 0x20 */ + 0x02050011, + 0x02040710, + 0x02050012, + 0x02041901, + + 0x02050002, + 0x0204AAB8, + 0x0205000D, + 0x02044440, + + 0x02050008, + 0x02040300, + 0x02050017, + 0x020400AF, + + /* --- Next Codec --- */ + + /* coreboot specific header */ + 0x80862806, // Codec Vendor / Device ID: Intel PantherPoint HDMI + 0x80860101, // Subsystem ID + 0x00000004, // Number of jacks + + /* NID 0x01, HDA Codec Subsystem ID Verb Table: 0x80860101 */ + 0x00172001, + 0x00172101, + 0x00172286, + 0x00172380, + + /* Pin Complex (NID 0x05) Digital Out at Int HDMI */ + 0x30571c10, + 0x30571d00, + 0x30571e56, + 0x30571f18, + + /* Pin Complex (NID 0x06) Digital Out at Int HDMI */ + 0x30671c20, + 0x30671d00, + 0x30671e56, + 0x30671f18, + + /* Pin Complex (NID 0x07) Digital Out at Int HDMI */ + 0x30771c30, + 0x30771d00, + 0x30771e56, + 0x30771f18 +}; + +static const u32 mainboard_pc_beep_verbs[] = { + 0x00170500, /* power up everything (codec, dac, adc, mixers) */ + 0x01470740, /* enable speaker out */ + 0x01470c02, /* set speaker EAPD pin */ + 0x0143b01f, /* unmute speaker */ + 0x00c37100, /* unmute mixer nid 0xc input 1 */ + 0x00b37410, /* unmute mixer nid 0xb beep input and set volume */ +}; + +static const u32 mainboard_pc_beep_verbs_size = + sizeof(mainboard_pc_beep_verbs) / sizeof(mainboard_pc_beep_verbs[0]); diff --git a/src/mainboard/google/parrot/mainboard.c b/src/mainboard/google/parrot/mainboard.c new file mode 100644 index 0000000000..32a79d92c2 --- /dev/null +++ b/src/mainboard/google/parrot/mainboard.c @@ -0,0 +1,328 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <types.h> +#include <string.h> +#include <device/device.h> +#include <device/pci_def.h> +#include <device/pci_ops.h> +#include <console/console.h> +#if defined(CONFIG_PCI_OPTION_ROM_RUN_YABEL) && CONFIG_PCI_OPTION_ROM_RUN_YABEL +#include <x86emu/x86emu.h> +#endif +#include <pc80/mc146818rtc.h> +#include <arch/acpi.h> +#include <arch/io.h> +#include <arch/interrupt.h> +#include <arch/coreboot_tables.h> +#include "hda_verb.h" +#include "onboard.h" +#include "ec.h" +#include <southbridge/intel/bd82x6x/pch.h> +#include <smbios.h> +#include <device/pci.h> +#include <ec/compal/ene932/ec.h> + +void mainboard_suspend_resume(void) +{ + /* Call SMM finalize() handlers before resume */ + outb(0xcb, 0xb2); + + /* Enable ACPI mode before OS resume */ + outb(0xe1, 0xb2); +} + +#if defined(CONFIG_PCI_OPTION_ROM_RUN_REALMODE) && CONFIG_PCI_OPTION_ROM_RUN_REALMODE +static int int15_handler(struct eregs *regs) +{ + int res=-1; + + printk(BIOS_DEBUG, "%s: INT15 function %04x!\n", + __func__, regs->eax & 0xffff); + + switch(regs->eax & 0xffff) { + case 0x5f34: + /* + * Set Panel Fitting Hook: + * bit 2 = Graphics Stretching + * bit 1 = Text Stretching + * bit 0 = Centering (do not set with bit1 or bit2) + * 0 = video bios default + */ + regs->eax &= 0xffff0000; + regs->eax |= 0x005f; + regs->ecx &= 0xffffff00; + regs->ecx |= 0x00; /* Use video bios default */ + res = 0; + break; + case 0x5f35: + /* + * Boot Display Device Hook: + * bit 0 = CRT + * bit 1 = TV (eDP) + * bit 2 = EFP + * bit 3 = LFP + * bit 4 = CRT2 + * bit 5 = TV2 (eDP) + * bit 6 = EFP2 + * bit 7 = LFP2 + */ + regs->eax &= 0xffff0000; + regs->eax |= 0x005f; + regs->ecx &= 0xffff0000; + regs->ecx |= 0x0000; /* Use video bios default */ + res = 0; + break; + case 0x5f51: + /* + * Hook to select active LFP configuration: + * 00h = No LVDS, VBIOS does not enable LVDS + * 01h = Int-LVDS, LFP driven by integrated LVDS decoder + * 02h = SVDO-LVDS, LFP driven by SVDO decoder + * 03h = eDP, LFP Driven by Int-DisplayPort encoder + */ + regs->eax &= 0xffff0000; + regs->eax |= 0x005f; + regs->ecx &= 0xffff0000; + regs->ecx |= 0x0003; /* eDP */ + res = 0; + break; + case 0x5f70: + switch ((regs->ecx >> 8) & 0xff) { + case 0: + /* Get Mux */ + regs->eax &= 0xffff0000; + regs->eax |= 0x005f; + regs->ecx &= 0xffff0000; + regs->ecx |= 0x0000; + res = 0; + break; + case 1: + /* Set Mux */ + regs->eax &= 0xffff0000; + regs->eax |= 0x005f; + regs->ecx &= 0xffff0000; + regs->ecx |= 0x0000; + res = 0; + break; + case 2: + /* Get SG/Non-SG mode */ + regs->eax &= 0xffff0000; + regs->eax |= 0x005f; + regs->ecx &= 0xffff0000; + regs->ecx |= 0x0000; + res = 0; + break; + default: + /* Interrupt was not handled */ + printk(BIOS_DEBUG, "Unknown INT15 5f70 function: 0x%02x\n", + ((regs->ecx >> 8) & 0xff)); + return 0; + } + break; + + default: + printk(BIOS_DEBUG, "Unknown INT15 function %04x!\n", + regs->eax & 0xffff); + break; + } + return res; +} +#endif + +#if defined(CONFIG_PCI_OPTION_ROM_RUN_YABEL) && CONFIG_PCI_OPTION_ROM_RUN_YABEL +static int int15_handler(void) +{ + printk(BIOS_DEBUG, "%s: AX=%04x BX=%04x CX=%04x DX=%04x\n", + __func__, M.x86.R_AX, M.x86.R_BX, M.x86.R_CX, M.x86.R_DX); + + switch (M.x86.R_AX) { + case 0x5f34: + /* + * Set Panel Fitting Hook: + * bit 2 = Graphics Stretching + * bit 1 = Text Stretching + * bit 0 = Centering (do not set with bit1 or bit2) + */ + M.x86.R_AX = 0x005f; + M.x86.R_CX = 0x00; + break; + case 0x5f35: + /* + * Boot Display Device Hook: + * bit 0 = CRT + * bit 1 = TV (eDP) + * bit 2 = EFP + * bit 3 = LFP + * bit 4 = CRT2 + * bit 5 = TV2 (eDP) + * bit 6 = EFP2 + * bit 7 = LFP2 + */ + M.x86.R_AX = 0x005f; + M.x86.R_CX = 0x0000; /* Use video bios default */ + break; + case 0x5f51: + /* + * Hook to select active LFP configuration: + * 00h = No LVDS, VBIOS does not enable LVDS + * 01h = Int-LVDS, LFP driven by integrated LVDS decoder + * 02h = SVDO-LVDS, LFP driven by SVDO decoder + * 03h = eDP, LFP Driven by Int-DisplayPort encoder + */ + M.x86.R_AX = 0x005f; + M.x86.R_CX = 3; /* eDP */ + break; + case 0x5f70: + switch (M.x86.R_CH) { + case 0: + /* Get Mux */ + M.x86.R_AX = 0x005f; + M.x86.R_CL = 0; + break; + case 1: + /* Set Mux */ + M.x86.R_AX = 0x005f; + M.x86.R_CX = 0; + break; + case 2: + /* Get SG/Non-SG mode */ + M.x86.R_AX = 0x005f; + M.x86.R_CX = 0; + break; + default: + /* Interrupt was not handled */ + printk(BIOS_DEBUG, "Unknown INT15 5f70 function: 0x%02x\n", + M.x86.R_CH); + return 0; + } + break; + default: + /* Interrupt was not handled */ + printk(BIOS_DEBUG, "Unknown INT15 function: 0x%04x\n", + M.x86.R_AX); + return 0; + } + + /* Interrupt handled */ + return 1; +} +#endif + +#if CONFIG_PCI_OPTION_ROM_RUN_YABEL || CONFIG_PCI_OPTION_ROM_RUN_REALMODE +static void int15_install(void) +{ +#if CONFIG_PCI_OPTION_ROM_RUN_YABEL + typedef int (* yabel_handleIntFunc)(void); + extern yabel_handleIntFunc yabel_intFuncArray[256]; + yabel_intFuncArray[0x15] = int15_handler; +#endif +#ifdef CONFIG_PCI_OPTION_ROM_RUN_REALMODE + mainboard_interrupt_handlers(0x15, &int15_handler); +#endif +} +#endif + +/* Audio Setup */ + +extern const u32 * cim_verb_data; +extern u32 cim_verb_data_size; +extern const u32 * pc_beep_verbs; +extern u32 pc_beep_verbs_size; + +static void verb_setup(void) +{ + cim_verb_data = mainboard_cim_verb_data; + cim_verb_data_size = sizeof(mainboard_cim_verb_data); + pc_beep_verbs = mainboard_pc_beep_verbs; + pc_beep_verbs_size = mainboard_pc_beep_verbs_size; + +} + +static void mainboard_init(device_t dev) +{ + /* Initialize the Embedded Controller */ + parrot_ec_init(); +} + +static int parrot_smbios_type41(int *handle, unsigned long *current, + const char *name, u8 irq, u8 addr) +{ + struct smbios_type41 *t = (struct smbios_type41 *)*current; + int len = sizeof(struct smbios_type41); + + memset(t, 0, sizeof(struct smbios_type41)); + t->type = SMBIOS_ONBOARD_DEVICES_EXTENDED_INFORMATION; + t->handle = *handle; + t->length = len - 2; + t->reference_designation = smbios_add_string(t->eos, name); + t->device_type = SMBIOS_DEVICE_TYPE_OTHER; + t->device_status = 1; + t->device_type_instance = irq; + t->segment_group_number = 0; + t->bus_number = addr; + t->function_number = 0; + t->device_number = 0; + + len = t->length + smbios_string_table_len(t->eos); + *current += len; + *handle += 1; + return len; +} + +static int parrot_onboard_smbios_data(device_t dev, int *handle, + unsigned long *current) +{ + int len = 0; + u8 hardware_version = parrot_rev(); + if (hardware_version < 0x2) { /* DVT vs PVT */ + len += parrot_smbios_type41(handle, current, + PARROT_TRACKPAD_NAME, + PARROT_TRACKPAD_IRQ_DVT, + PARROT_TRACKPAD_I2C_ADDR); + } else { + len += parrot_smbios_type41(handle, current, + PARROT_TRACKPAD_NAME, + PARROT_TRACKPAD_IRQ_PVT, + PARROT_TRACKPAD_I2C_ADDR); + } + + + return len; +} + +// mainboard_enable is executed as first thing after +// enumerate_buses(). + +static void mainboard_enable(device_t dev) +{ + dev->ops->init = mainboard_init; + dev->ops->get_smbios_data = parrot_onboard_smbios_data; +#if CONFIG_PCI_OPTION_ROM_RUN_YABEL || CONFIG_PCI_OPTION_ROM_RUN_REALMODE + /* Install custom int15 handler for VGA OPROM */ + int15_install(); +#endif + verb_setup(); +} + +struct chip_operations mainboard_ops = { + CHIP_NAME("Google Parrot ChromeBook") + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/google/parrot/mainboard_smi.c b/src/mainboard/google/parrot/mainboard_smi.c new file mode 100644 index 0000000000..6f83fd8f00 --- /dev/null +++ b/src/mainboard/google/parrot/mainboard_smi.c @@ -0,0 +1,217 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/io.h> +#include <arch/romcc_io.h> +#include <console/console.h> +#include <cpu/x86/smm.h> +#include <southbridge/intel/bd82x6x/nvs.h> +#include <southbridge/intel/bd82x6x/pch.h> +#include <southbridge/intel/bd82x6x/me.h> +#include <northbridge/intel/sandybridge/sandybridge.h> +#include <cpu/intel/model_206ax/model_206ax.h> +#include <elog.h> +#include <ec/compal/ene932/ec.h> +#include "ec.h" + +/* Power Management PCI Configuration Registers + * Bus 0, Device 31, Function 0, Offset 0xB8 + * 00 = No Effect + * 01 = SMI# + * 10 = SCI + * 11 = NMI + */ +#define GPI_ROUT 0x8000F8B8 +#define GPI_IS_SMI 0x01 +#define GPI_IS_SCI 0x02 + +static void set_lid_gpi_mode(u32 mode) +{ + u32 reg32 = 0; + u16 reg16 = 0; + + /* read the GPI register, clear the lid GPI's mode, write the new mode + * and write out the register. + */ + outl(GPI_ROUT, 0xcf8); + reg32 = inl(0xcfc); + reg32 &= ~(0x03 << (EC_LID_GPI * 2)); + reg32 |= (mode << (EC_LID_GPI * 2)); + outl(GPI_ROUT, 0xcf8); + outl(reg32, 0xcfc); + + /* Set or Disable Lid GPE as SMI source in the ALT_GPI_SMI_EN register. */ + reg16 = inw(smm_get_pmbase() + ALT_GP_SMI_EN); + if (mode == GPI_IS_SCI) { + reg16 &= ~(1 << EC_LID_GPI); + } else { + reg16 |= (1 << EC_LID_GPI); + } + outw(reg16, smm_get_pmbase() + ALT_GP_SMI_EN); + + return; +} + +int mainboard_io_trap_handler(int smif) +{ + printk(BIOS_DEBUG, "mainboard_io_trap_handler: %x\n", smif); + switch (smif) { + case 0x99: + printk(BIOS_DEBUG, "Sample\n"); + smm_get_gnvs()->smif = 0; + break; + default: + return 0; + } + + /* On success, the IO Trap Handler returns 0 + * On failure, the IO Trap Handler returns a value != 0 + * + * For now, we force the return value to 0 and log all traps to + * see what's going on. + */ + //gnvs->smif = 0; + return 1; +} + + +static u8 mainboard_smi_ec(void) +{ + u8 src; + u32 pm1_cnt; + static int battery_critical_logged; + + ec_kbc_write_cmd(0x56); + src = ec_kbc_read_ob(); + printk(BIOS_DEBUG, "mainboard_smi_ec src: %x\n", src); + + switch (src) { + case EC_BATTERY_CRITICAL: +#if CONFIG_ELOG_GSMI + if (!battery_critical_logged) + elog_add_event_byte(ELOG_TYPE_EC_EVENT, + EC_EVENT_BATTERY_CRITICAL); +#endif + battery_critical_logged = 1; + break; + case EC_LID_CLOSE: + printk(BIOS_DEBUG, "LID CLOSED, SHUTDOWN\n"); + +#if CONFIG_ELOG_GSMI + elog_add_event_byte(ELOG_TYPE_EC_EVENT, EC_EVENT_LID_CLOSED); +#endif + /* Go to S5 */ + pm1_cnt = inl(smm_get_pmbase() + PM1_CNT); + pm1_cnt |= (0xf << 10); + outl(pm1_cnt, smm_get_pmbase() + PM1_CNT); + break; + } + + return src; +} + +void mainboard_smi_gpi(u16 gpi_sts) +{ + u32 pm1_cnt; + + printk(BIOS_DEBUG, "mainboard_smi_gpi: %x\n", gpi_sts); + if (gpi_sts & (1 << EC_SMI_GPI)) { + /* Process all pending events from EC */ + while (mainboard_smi_ec() != EC_NO_EVENT); + } + else if (gpi_sts & (1 << EC_LID_GPI)) { + printk(BIOS_DEBUG, "LID CLOSED, SHUTDOWN\n"); + +#if CONFIG_ELOG_GSMI + elog_add_event_byte(ELOG_TYPE_EC_EVENT, EC_EVENT_LID_CLOSED); +#endif + /* Go to S5 */ + pm1_cnt = inl(smm_get_pmbase() + PM1_CNT); + pm1_cnt |= (0xf << 10); + outl(pm1_cnt, smm_get_pmbase() + PM1_CNT); + } +} + +void mainboard_smi_sleep(u8 slp_typ) +{ + printk(BIOS_DEBUG, "mainboard_smi_sleep: %x\n", slp_typ); + /* Disable SCI and SMI events */ + + + /* Clear pending events that may trigger immediate wake */ + + + /* Enable wake events */ + + + /* Tell the EC to Disable USB power */ + if (smm_get_gnvs()->s3u0 == 0 && smm_get_gnvs()->s3u1 == 0) { + ec_kbc_write_cmd(0x45); + ec_kbc_write_ib(0xF2); + } +} + +#define APMC_FINALIZE 0xcb +#define APMC_ACPI_EN 0xe1 +#define APMC_ACPI_DIS 0x1e + +static int mainboard_finalized = 0; + +int mainboard_smi_apmc(u8 apmc) +{ + printk(BIOS_DEBUG, "mainboard_smi_apmc: %x\n", apmc); + switch (apmc) { + case APMC_FINALIZE: + printk(BIOS_DEBUG, "APMC: FINALIZE\n"); + if (mainboard_finalized) { + printk(BIOS_DEBUG, "APMC#: Already finalized\n"); + return 0; + } + + intel_me_finalize_smm(); + intel_pch_finalize_smm(); + intel_sandybridge_finalize_smm(); + intel_model_206ax_finalize_smm(); + + mainboard_finalized = 1; + break; + case APMC_ACPI_EN: + printk(BIOS_DEBUG, "APMC: ACPI_EN\n"); + /* Clear all pending events */ + /* EC cmd:59 data:E8 */ + ec_kbc_write_cmd(0x59); + ec_kbc_write_ib(0xE8); + + /* Set LID GPI to generate SCIs */ + set_lid_gpi_mode(GPI_IS_SCI); + + break; + case APMC_ACPI_DIS: + printk(BIOS_DEBUG, "APMC: ACPI_DIS\n"); + /* Clear all pending events */ + /* EC cmd:59 data:e9 */ + ec_kbc_write_cmd(0x59); + ec_kbc_write_ib(0xE9); + + /* Set LID GPI to generate SMIs */ + set_lid_gpi_mode(GPI_IS_SMI); + break; + } + return 0; +} diff --git a/src/mainboard/google/parrot/onboard.h b/src/mainboard/google/parrot/onboard.h new file mode 100644 index 0000000000..f3d200d54e --- /dev/null +++ b/src/mainboard/google/parrot/onboard.h @@ -0,0 +1,29 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef PARROT_ONBOARD_H +#define PARROT_ONBOARD_H + +#include <arch/smp/mpspec.h> + +#define PARROT_TRACKPAD_NAME "trackpad" +#define PARROT_TRACKPAD_I2C_ADDR 0x67 +#define PARROT_TRACKPAD_IRQ_DVT 16 +#define PARROT_TRACKPAD_IRQ_PVT 20 +#endif diff --git a/src/mainboard/google/parrot/romstage.c b/src/mainboard/google/parrot/romstage.c new file mode 100644 index 0000000000..58c3881f40 --- /dev/null +++ b/src/mainboard/google/parrot/romstage.c @@ -0,0 +1,307 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2010 coresystems GmbH + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <string.h> +#include <lib.h> +#include <timestamp.h> +#include <arch/io.h> +#include <arch/romcc_io.h> +#include <device/pci_def.h> +#include <device/pnp_def.h> +#include <cpu/x86/lapic.h> +#include <pc80/mc146818rtc.h> +#include <cbmem.h> +#include <console/console.h> +#include "northbridge/intel/sandybridge/sandybridge.h" +#include "northbridge/intel/sandybridge/raminit.h" +#include "southbridge/intel/bd82x6x/pch.h" +#include "southbridge/intel/bd82x6x/gpio.h" +#include <arch/cpu.h> +#include <cpu/x86/bist.h> +#include <cpu/x86/msr.h> +#include "gpio.h" +#if CONFIG_CHROMEOS +#include <vendorcode/google/chromeos/chromeos.h> +#endif +#include <cbfs.h> +#include "ec/compal/ene932/ec.h" + +static void pch_enable_lpc(void) +{ + /* Parrot EC Decode Range Port60/64, Port62/66 */ + /* Enable EC, PS/2 Keyboard/Mouse */ + pci_write_config16(PCH_LPC_DEV, LPC_EN, KBC_LPC_EN | MC_LPC_EN); + + /* Map EC_IO decode to the LPC bus */ + pci_write_config32(PCH_LPC_DEV, LPC_GEN1_DEC, (EC_IO & ~3) | 0x00040001); + + /* Map EC registers 68/6C decode to the LPC bus */ + pci_write_config32(PCH_LPC_DEV, LPC_GEN2_DEC, (68 & ~3) | 0x00040001); +} + +static void rcba_config(void) +{ + u32 reg32; + + /* + * GFX INTA -> PIRQA (MSI) + * D28IP_P2IP WLAN INTA -> PIRQB + * D28IP_P3IP ETH0 INTC -> PIRQD + * D29IP_E1P EHCI1 INTA -> PIRQE + * D26IP_E2P EHCI2 INTA -> PIRQE + * D31IP_SIP SATA INTA -> PIRQF (MSI) + * D31IP_SMIP SMBUS INTB -> PIRQG + * D31IP_TTIP THRT INTC -> PIRQH + * D27IP_ZIP HDA INTA -> PIRQG (MSI) + * + * Trackpad DVT PIRQA (16) + * Trackpad DVT PIRQE (20) + */ + + /* Device interrupt pin register (board specific) */ + RCBA32(D31IP) = (INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) | + (INTB << D31IP_SMIP) | (INTA << D31IP_SIP); + RCBA32(D30IP) = (NOINT << D30IP_PIP); + RCBA32(D29IP) = (INTA << D29IP_E1P); + RCBA32(D28IP) = (NOINT << D28IP_P1IP) | (INTA << D28IP_P2IP) | + (INTC << D28IP_P3IP) | (NOINT << D28IP_P4IP) | + (NOINT << D28IP_P5IP) | (NOINT << D28IP_P6IP) | + (NOINT << D28IP_P7IP) | (NOINT << D28IP_P8IP); + RCBA32(D27IP) = (INTA << D27IP_ZIP); + RCBA32(D26IP) = (INTA << D26IP_E2P); + RCBA32(D25IP) = (NOINT << D25IP_LIP); + RCBA32(D22IP) = (NOINT << D22IP_MEI1IP); + + /* Device interrupt route registers */ + DIR_ROUTE(D31IR, PIRQB, PIRQH, PIRQA, PIRQC); + DIR_ROUTE(D29IR, PIRQD, PIRQE, PIRQF, PIRQG); + DIR_ROUTE(D28IR, PIRQB, PIRQC, PIRQD, PIRQE); + DIR_ROUTE(D27IR, PIRQA, PIRQH, PIRQA, PIRQB); + DIR_ROUTE(D26IR, PIRQF, PIRQE, PIRQG, PIRQH); + DIR_ROUTE(D25IR, PIRQA, PIRQB, PIRQC, PIRQD); + DIR_ROUTE(D22IR, PIRQA, PIRQB, PIRQC, PIRQD); + + /* Enable IOAPIC (generic) */ + RCBA16(OIC) = 0x0100; + /* PCH BWG says to read back the IOAPIC enable register */ + (void) RCBA16(OIC); + + /* Disable unused devices (board specific) */ + reg32 = RCBA32(FD); + reg32 |= PCH_DISABLE_ALWAYS; + /* Disable PCI bridge so MRC does not probe this bus */ + reg32 |= PCH_DISABLE_P2P; + RCBA32(FD) = reg32; +} + +void main(unsigned long bist) +{ + int boot_mode = 0; + int cbmem_was_initted; + u32 pm1_cnt; + u16 pm1_sts; + +#if CONFIG_COLLECT_TIMESTAMPS + tsc_t start_romstage_time; + tsc_t before_dram_time; + tsc_t after_dram_time; + tsc_t base_time = { + .lo = pci_read_config32(PCI_DEV(0, 0x00, 0), 0xdc), + .hi = pci_read_config32(PCI_DEV(0, 0x1f, 2), 0xd0) + }; +#endif + struct pei_data pei_data = { + pei_version: PEI_VERSION, + mchbar: DEFAULT_MCHBAR, + dmibar: DEFAULT_DMIBAR, + epbar: DEFAULT_EPBAR, + pciexbar: CONFIG_MMCONF_BASE_ADDRESS, + smbusbar: SMBUS_IO_BASE, + wdbbar: 0x4000000, + wdbsize: 0x1000, + hpet_address: CONFIG_HPET_ADDRESS, + rcba: DEFAULT_RCBABASE, + pmbase: DEFAULT_PMBASE, + gpiobase: DEFAULT_GPIOBASE, + thermalbase: 0xfed08000, + system_type: 0, // 0 Mobile, 1 Desktop/Server + tseg_size: CONFIG_SMM_TSEG_SIZE, + spd_addresses: { 0xA0, 0x00,0xA4,0x00 }, + ts_addresses: { 0x00, 0x00, 0x00, 0x00 }, + ec_present: 1, + // 0 = leave channel enabled + // 1 = disable dimm 0 on channel + // 2 = disable dimm 1 on channel + // 3 = disable dimm 0+1 on channel + dimm_channel0_disabled: 2, + dimm_channel1_disabled: 2, + max_ddr3_freq: 1600, + usb_port_config: { + /* Empty and onboard Ports 0-7, set to un-used pin OC3 */ + { 0, 3, 0x0000 }, /* P0: Empty */ + { 1, 0, 0x0040 }, /* P1: Left USB 1 (OC0) */ + { 1, 1, 0x0040 }, /* P2: Left USB 2 (OC1) */ + { 1, 1, 0x0040 }, /* P3: Left USB 3 (OC1) */ + { 0, 3, 0x0000 }, /* P4: Empty */ + { 0, 3, 0x0000 }, /* P5: Empty */ + { 0, 3, 0x0000 }, /* P6: Empty */ + { 0, 3, 0x0000 }, /* P7: Empty */ + /* Empty and onboard Ports 8-13, set to un-used pin OC4 */ + { 1, 4, 0x0040 }, /* P8: MiniPCIe (WLAN) (no OC) */ + { 0, 4, 0x0000 }, /* P9: Empty */ + { 1, 4, 0x0040 }, /* P10: Camera (no OC) */ + { 0, 4, 0x0000 }, /* P11: Empty */ + { 0, 4, 0x0000 }, /* P12: Empty */ + { 0, 4, 0x0000 }, /* P13: Empty */ + }, + }; + +#if CONFIG_COLLECT_TIMESTAMPS + start_romstage_time = rdtsc(); +#endif + + if (bist == 0) + enable_lapic(); + + pch_enable_lpc(); + + /* Enable GPIOs */ + pci_write_config32(PCH_LPC_DEV, GPIO_BASE, DEFAULT_GPIOBASE|1); + pci_write_config8(PCH_LPC_DEV, GPIO_CNTL, 0x10); + setup_pch_gpios(&parrot_gpio_map); + + /* Initialize console device(s) */ + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + if (MCHBAR16(SSKPD) == 0xCAFE) { + printk(BIOS_DEBUG, "soft reset detected\n"); + boot_mode = 1; + + /* System is not happy after keyboard reset... */ + printk(BIOS_DEBUG, "Issuing CF9 warm reset\n"); + outb(0x6, 0xcf9); + hlt(); + } + + /* Perform some early chipset initialization required + * before RAM initialization can work + */ + sandybridge_early_initialization(SANDYBRIDGE_MOBILE); + printk(BIOS_DEBUG, "Back from sandybridge_early_initialization()\n"); + + /* Check PM1_STS[15] to see if we are waking from Sx */ + pm1_sts = inw(DEFAULT_PMBASE + PM1_STS); + + /* Read PM1_CNT[12:10] to determine which Sx state */ + pm1_cnt = inl(DEFAULT_PMBASE + PM1_CNT); + + if ((pm1_sts & WAK_STS) && ((pm1_cnt >> 10) & 7) == 5) { +#if CONFIG_HAVE_ACPI_RESUME + printk(BIOS_DEBUG, "Resume from S3 detected.\n"); + boot_mode = 2; + /* Clear SLP_TYPE. This will break stage2 but + * we care for that when we get there. + */ + outl(pm1_cnt & ~(7 << 10), DEFAULT_PMBASE + PM1_CNT); +#else + printk(BIOS_DEBUG, "Resume from S3 detected, but disabled.\n"); +#endif + } + + post_code(0x38); + /* Enable SPD ROMs and DDR-III DRAM */ + enable_smbus(); + + /* Prepare USB controller early in S3 resume */ + if (boot_mode == 2) + enable_usb_bar(); + + post_code(0x39); + + post_code(0x3a); + pei_data.boot_mode = boot_mode; +#if CONFIG_COLLECT_TIMESTAMPS + before_dram_time = rdtsc(); +#endif + sdram_initialize(&pei_data); + +#if CONFIG_COLLECT_TIMESTAMPS + after_dram_time = rdtsc(); +#endif + post_code(0x3c); + + rcba_config(); + post_code(0x3d); + + quick_ram_check(); + post_code(0x3e); + + MCHBAR16(SSKPD) = 0xCAFE; +#if CONFIG_EARLY_CBMEM_INIT + cbmem_was_initted = !cbmem_initialize(); +#else + cbmem_was_initted = cbmem_reinit((uint64_t) (get_top_of_ram() + - HIGH_MEMORY_SIZE)); +#endif + +#if CONFIG_HAVE_ACPI_RESUME + /* If there is no high memory area, we didn't boot before, so + * this is not a resume. In that case we just create the cbmem toc. + */ + + *(u32 *)CBMEM_BOOT_MODE = 0; + *(u32 *)CBMEM_RESUME_BACKUP = 0; + + if ((boot_mode == 2) && cbmem_was_initted) { + void *resume_backup_memory = cbmem_find(CBMEM_ID_RESUME); + if (resume_backup_memory) { + *(u32 *)CBMEM_BOOT_MODE = boot_mode; + *(u32 *)CBMEM_RESUME_BACKUP = (u32)resume_backup_memory; + } + /* Magic for S3 resume */ + pci_write_config32(PCI_DEV(0, 0x00, 0), SKPAD, 0xcafed00d); + } else if (boot_mode == 2) { + /* Failed S3 resume, reset to come up cleanly */ + outb(0x6, 0xcf9); + hlt(); + } else { + pci_write_config32(PCI_DEV(0, 0x00, 0), SKPAD, 0xcafebabe); + } +#endif + post_code(0x3f); +#if CONFIG_CHROMEOS + init_chromeos(boot_mode); +#endif +#if CONFIG_COLLECT_TIMESTAMPS + timestamp_init(base_time); + timestamp_add(TS_START_ROMSTAGE, start_romstage_time ); + timestamp_add(TS_BEFORE_INITRAM, before_dram_time ); + timestamp_add(TS_AFTER_INITRAM, after_dram_time ); + timestamp_add_now(TS_END_ROMSTAGE); +#endif +#if CONFIG_CONSOLE_CBMEM + /* Keep this the last thing this function does. */ + cbmemc_reinit(); +#endif +} diff --git a/src/mainboard/google/parrot/thermal.h b/src/mainboard/google/parrot/thermal.h new file mode 100644 index 0000000000..9154d0ab46 --- /dev/null +++ b/src/mainboard/google/parrot/thermal.h @@ -0,0 +1,31 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 - 2012 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef PARROT_THERMAL_H +#define PARROT_THERMAL_H + +/* Active Thermal and fans are controlled by the EC. */ + +/* Temperature which OS will shutdown at */ +#define CRITICAL_TEMPERATURE 100 + +/* Temperature which OS will throttle CPU */ +#define PASSIVE_TEMPERATURE 90 + +#endif |