summaryrefslogtreecommitdiff
path: root/src/mainboard
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard')
-rw-r--r--src/mainboard/google/brya/Kconfig3
-rw-r--r--src/mainboard/google/brya/variants/xol/overridetree.cb428
2 files changed, 429 insertions, 2 deletions
diff --git a/src/mainboard/google/brya/Kconfig b/src/mainboard/google/brya/Kconfig
index dae3f16a4c..297e0b4db0 100644
--- a/src/mainboard/google/brya/Kconfig
+++ b/src/mainboard/google/brya/Kconfig
@@ -475,6 +475,8 @@ config BOARD_GOOGLE_XIVU
config BOARD_GOOGLE_XOL
select BOARD_GOOGLE_BASEBOARD_BRYA
+ select DRIVERS_I2C_DA7219
+ select DRIVERS_INTEL_ISH
select SOC_INTEL_RAPTORLAKE
config BOARD_GOOGLE_YAVIKS
@@ -583,6 +585,7 @@ config DRIVER_TPM_I2C_BUS
default 0x1 if BOARD_GOOGLE_DOCHI
default 0x0 if BOARD_GOOGLE_QUANDISO
default 0x0 if BOARD_GOOGLE_ANRAGGAR
+ default 0x1 if BOARD_GOOGLE_XOL
config DRIVER_TPM_I2C_ADDR
hex
diff --git a/src/mainboard/google/brya/variants/xol/overridetree.cb b/src/mainboard/google/brya/variants/xol/overridetree.cb
index 4f2c04a57a..205b43f54f 100644
--- a/src/mainboard/google/brya/variants/xol/overridetree.cb
+++ b/src/mainboard/google/brya/variants/xol/overridetree.cb
@@ -1,6 +1,430 @@
+
chip soc/intel/alderlake
+ register "domain_vr_config[VR_DOMAIN_IA]" = "{
+ .enable_fast_vmode = 1,
+ }"
+
+ register "sagv" = "SaGv_Enabled"
+
+ register "pch_slp_a_min_assertion_width" = "SLP_A_ASSERTION_DEFAULT"
+
+ # As per Intel Advisory doc#723158, the change is required to prevent possible
+ # display flickering issue.
+ register "disable_dynamic_tccold_handshake" = "true"
+
+ register "platform_pmax" = "145"
+
+ register "usb2_ports[0]" = "{
+ .enable = 1,
+ .ocpin = OC0,
+ .pre_emp_bias = USB2_BIAS_28P15MV,
+ .tx_bias = USB2_BIAS_0MV,
+ .tx_emp_enable = USB2_PRE_EMP_ON,
+ .pre_emp_bit = USB2_HALF_BIT_PRE_EMP,
+ .type_c = 1,
+ }" # USB2_C0
+ register "usb2_ports[1]" = "USB2_PORT_EMPTY"
+ register "usb2_ports[2]" = "{
+ .enable = 1,
+ .ocpin = OC_SKIP,
+ .pre_emp_bias = USB2_BIAS_28P15MV,
+ .tx_bias = USB2_BIAS_0MV,
+ .tx_emp_enable = USB2_PRE_EMP_ON,
+ .pre_emp_bit = USB2_HALF_BIT_PRE_EMP,
+ .type_c = 1,
+ }" # USB2_C2
+ register "usb2_ports[3]" = "{
+ .enable = 1,
+ .ocpin = OC_SKIP,
+ .pre_emp_bias = USB2_BIAS_28P15MV,
+ .tx_bias = USB2_BIAS_0MV,
+ .tx_emp_enable = USB2_DE_EMP_ON_PRE_EMP_ON,
+ .pre_emp_bit = USB2_FULL_BIT_PRE_EMP,
+ }" # uSD
+ register "usb2_ports[4]" = "{
+ .enable = 1,
+ .ocpin = OC_SKIP,
+ .pre_emp_bias = USB2_BIAS_28P15MV,
+ .tx_bias = USB2_BIAS_11P25MV,
+ .tx_emp_enable = USB2_DE_EMP_ON_PRE_EMP_ON,
+ .pre_emp_bit = USB2_FULL_BIT_PRE_EMP,
+ }" # USB2_A1
+ register "usb2_ports[5]" = "{
+ .enable = 1,
+ .ocpin = OC_SKIP,
+ .pre_emp_bias = USB2_BIAS_28P15MV,
+ .tx_bias = USB2_BIAS_0MV,
+ .tx_emp_enable = USB2_DE_EMP_ON_PRE_EMP_ON,
+ .pre_emp_bit = USB2_FULL_BIT_PRE_EMP,
+ }" # Camera
+ register "usb2_ports[6]" = "USB2_PORT_EMPTY"
+ register "usb2_ports[7]" = "USB2_PORT_EMPTY"
+ register "usb2_ports[8]" = "USB2_PORT_EMPTY"
+ register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth
+
+ register "usb3_ports[0]" = "USB3_PORT_EMPTY"
+ register "usb3_ports[1]" = "USB3_PORT_EMPTY"
+ register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB3_A1
+ register "usb3_ports[3]" = "USB3_PORT_EMPTY"
+
+ register "tcss_ports[0]" = "TCSS_PORT_DEFAULT(OC0)"
+ register "tcss_ports[1]" = "TCSS_PORT_EMPTY"
+ register "tcss_ports[2]" = "TCSS_PORT_DEFAULT(OC_SKIP)"
+ register "tcss_ports[3]" = "TCSS_PORT_EMPTY"
+
+ register "tcss_aux_ori" = "0x11"
+
+ register "typec_aux_bias_pads[0]" = "{.pad_auxp_dc = GPP_E22, .pad_auxn_dc = GPP_E23}"
+ register "typec_aux_bias_pads[2]" = "{.pad_auxp_dc = GPP_A19, .pad_auxn_dc = GPP_A20}"
+
+ register "serial_io_i2c_mode" = "{
+ [PchSerialIoIndexI2C0] = PchSerialIoPci,
+ [PchSerialIoIndexI2C1] = PchSerialIoPci,
+ [PchSerialIoIndexI2C2] = PchSerialIoDisabled,
+ [PchSerialIoIndexI2C3] = PchSerialIoDisabled,
+ [PchSerialIoIndexI2C4] = PchSerialIoDisabled,
+ [PchSerialIoIndexI2C5] = PchSerialIoPci,
+ }"
+
+ register "serial_io_gspi_mode" = "{
+ [PchSerialIoIndexGSPI0] = PchSerialIoDisabled,
+ [PchSerialIoIndexGSPI1] = PchSerialIoDisabled,
+ }"
+
+ # Intel Common SoC Config
+ #+-------------------+---------------------------+
+ #| Field | Value |
+ #+-------------------+---------------------------+
+ #| I2C0 | Audio |
+ #| I2C1 | cr50 TPM. Early init is |
+ #| | required to set up a BAR |
+ #| | for TPM communication |
+ #| I2C5 | Trackpad |
+ #+-------------------+---------------------------+
+ register "common_soc_config" = "{
+ .i2c[0]= {
+ .speed = I2C_SPEED_FAST,
+ .rise_time_ns = 175,
+ .fall_time_ns = 8,
+ },
+ .i2c[1] = {
+ .early_init = 1,
+ .speed = I2C_SPEED_FAST,
+ .rise_time_ns = 600,
+ .fall_time_ns = 400,
+ .data_hold_time_ns = 50,
+ },
+ .i2c[5] = {
+ .speed = I2C_SPEED_FAST,
+ .rise_time_ns = 650,
+ .fall_time_ns = 400,
+ .data_hold_time_ns = 50,
+ },
+ }"
+
+ device domain 0 on
+ device ref igpu on
+ chip drivers/gfx/generic
+ register "device_count" = "6"
+ # DDIA for eDP
+ register "device[0].name" = ""LCD""
+ # DDIB for HDMI
+ register "device[1].name" = ""DD01""
+ # TCP0 (DP-1) for port C0
+ register "device[2].name" = ""DD02""
+ register "device[2].use_pld" = "true"
+ register "device[2].pld" = "ACPI_PLD_TYPE_C(LEFT, RIGHT, ACPI_PLD_GROUP(1, 1))"
+ # TCP1 (DP-2) is unused for any ports but still enumerated in the kernel, so GFX device is added for TCP1
+ register "device[3].name" = ""DD03""
+ # TCP2 (DP-3) for port C2
+ register "device[4].name" = ""DD04""
+ register "device[4].use_pld" = "true"
+ register "device[4].pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(2, 1))"
+ # TCP3 (DP-4) is unused for any ports but still enumerated in the kernel, so GFX device is added for TCP3
+ register "device[5].name" = ""DD05""
+ device generic 0 on end
+ end
+ end # Integrated Graphics Device
+ device ref dtt on
+ chip drivers/intel/dptf
+ ## sensor information
+ register "options.tsr[0].desc" = ""DRAM_SOC""
+ register "options.tsr[1].desc" = ""Ambient""
+ register "options.tsr[2].desc" = ""Charger""
+
+ # TODO: below values are initial reference values only
+ ## Active Policy
+ register "policies.active" = "{
+ [0] = {
+ .target = DPTF_TEMP_SENSOR_0,
+ .thresholds = {
+ TEMP_PCT(75, 97),
+ TEMP_PCT(70, 93),
+ TEMP_PCT(60, 86),
+ TEMP_PCT(52, 80),
+ TEMP_PCT(47, 64),
+ TEMP_PCT(43, 52),
+ TEMP_PCT(40, 40),
+ }
+ },
+ [1] = {
+ .target = DPTF_TEMP_SENSOR_1,
+ .thresholds = {
+ TEMP_PCT(75, 97),
+ TEMP_PCT(70, 93),
+ TEMP_PCT(60, 86),
+ TEMP_PCT(52, 80),
+ TEMP_PCT(47, 64),
+ TEMP_PCT(43, 52),
+ TEMP_PCT(40, 40),
+ }
+ },
+ [2] = {
+ .target = DPTF_TEMP_SENSOR_2,
+ .thresholds = {
+ TEMP_PCT(82, 97),
+ TEMP_PCT(78, 93),
+ TEMP_PCT(72, 86),
+ TEMP_PCT(60, 80),
+ }
+ }
+ }"
+
+ ## Passive Policy
+ register "policies.passive" = "{
+ [0] = DPTF_PASSIVE(CPU, CPU, 95, 5000),
+ [1] = DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 80, 5000),
+ [2] = DPTF_PASSIVE(CPU, TEMP_SENSOR_1, 80, 5000),
+ [3] = DPTF_PASSIVE(CHARGER, TEMP_SENSOR_2, 75, 5000),
+ }"
+
+ ## Critical Policy
+ register "policies.critical" = "{
+ [0] = DPTF_CRITICAL(CPU, 105, SHUTDOWN),
+ [1] = DPTF_CRITICAL(TEMP_SENSOR_0, 85, SHUTDOWN),
+ [2] = DPTF_CRITICAL(TEMP_SENSOR_1, 85, SHUTDOWN),
+ [3] = DPTF_CRITICAL(TEMP_SENSOR_2, 85, SHUTDOWN),
+ }"
+
+ register "controls.power_limits" = "{
+ .pl1 = {
+ .min_power = 15000,
+ .max_power = 15000,
+ .time_window_min = 28 * MSECS_PER_SEC,
+ .time_window_max = 32 * MSECS_PER_SEC,
+ .granularity = 200,
+ },
+ .pl2 = {
+ .min_power = 55000,
+ .max_power = 55000,
+ .time_window_min = 28 * MSECS_PER_SEC,
+ .time_window_max = 32 * MSECS_PER_SEC,
+ .granularity = 1000,
+ }
+ }"
+
+ ## Charger Performance Control (Control, mA)
+ register "controls.charger_perf" = "{
+ [0] = { 255, 1700 },
+ [1] = { 24, 1500 },
+ [2] = { 16, 1000 },
+ [3] = { 8, 500 }
+ }"
+
+ ## Fan Performance Control (Percent, Speed, Noise, Power)
+ register "controls.fan_perf" = "{
+ [0] = { 90, 6700, 220, 2200, },
+ [1] = { 80, 5800, 180, 1800, },
+ [2] = { 70, 5000, 145, 1450, },
+ [3] = { 60, 4900, 115, 1150, },
+ [4] = { 50, 3838, 90, 900, },
+ [5] = { 40, 2904, 55, 550, },
+ [6] = { 30, 2337, 30, 300, },
+ [7] = { 20, 1608, 15, 150, },
+ [8] = { 10, 800, 10, 100, },
+ [9] = { 0, 0, 0, 50, }
+ }"
+
+ ## Fan options
+ register "options.fan.fine_grained_control" = "1"
+ register "options.fan.step_size" = "2"
- device domain 0 on
- end
+ device generic 0 alias dptf_policy on end
+ end
+ end
+ device ref pcie4_0 on
+ # Enable CPU PCIE RP 1 using CLK 1
+ register "cpu_pcie_rp[CPU_RP(1)]" = "{
+ .clk_req = 1,
+ .clk_src = 1,
+ .flags = PCIE_RP_LTR | PCIE_RP_AER,
+ }"
+ end # SSD
+ device ref tbt_pcie_rp0 off end
+ device ref tbt_pcie_rp1 off end
+ device ref tbt_pcie_rp2 off end
+ device ref tbt_pcie_rp3 off end
+ device ref tcss_dma0 off end
+ device ref tcss_dma1 off end
+ device ref ish on
+ chip drivers/intel/ish
+ register "add_acpi_dma_property" = "true"
+ device generic 0 on end
+ end
+ end
+ device ref ufs on end
+ device ref cnvi_wifi on
+ chip drivers/wifi/generic
+ register "wake" = "GPE0_PME_B0"
+ register "enable_cnvi_ddr_rfim" = "true"
+ device generic 0 on end
+ end
+ end
+ device ref i2c0 on
+ chip drivers/i2c/da7219
+ register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_A23)"
+ register "btn_cfg" = "50"
+ register "mic_det_thr" = "200"
+ register "jack_ins_deb" = "20"
+ register "jack_det_rate" = ""32ms_64ms""
+ register "jack_rem_deb" = "1"
+ register "a_d_btn_thr" = "0xa"
+ register "d_b_btn_thr" = "0x16"
+ register "b_c_btn_thr" = "0x21"
+ register "c_mic_btn_thr" = "0x3e"
+ register "btn_avg" = "4"
+ register "adc_1bit_rpt" = "1"
+ register "micbias_lvl" = "2600"
+ register "mic_amp_in_sel" = ""diff""
+ device i2c 1a on end
+ end
+ end #I2C0
+ device ref i2c1 on
+ chip drivers/i2c/tpm
+ register "hid" = ""GOOG0005""
+ register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_A13_IRQ)"
+ device i2c 50 on end
+ end
+ end #I2C1
+ device ref i2c5 on
+ chip drivers/i2c/hid
+ register "generic.hid" = ""ZNT0000""
+ register "generic.desc" = ""Zinitix Touchpad""
+ register "generic.irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F14_IRQ)"
+ register "generic.wake" = "GPE0_DW2_14"
+ register "generic.detect" = "1"
+ register "hid_desc_reg_offset" = "0xE"
+ device i2c 40 on end
+ end
+ end #I2C5
+ device ref hda on
+ chip drivers/generic/max98357a
+ register "hid" = ""MX98360A""
+ register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A11)"
+ register "sdmode_delay" = "5"
+ device generic 0 on end
+ end
+ chip drivers/sof
+ register "spkr_tplg" = "max98360a"
+ register "jack_tplg" = "da7219"
+ register "mic_tplg" = "_2ch_pdm0"
+ device generic 0 on end
+ end
+ end
+ device ref pch_espi on
+ chip ec/google/chromeec
+ use conn0 as mux_conn[0]
+ use conn1 as mux_conn[1]
+ device pnp 0c09.0 on end
+ end
+ end
+ device ref pmc hidden
+ chip drivers/intel/pmc_mux
+ device generic 0 on
+ chip drivers/intel/pmc_mux/conn
+ use usb2_port1 as usb2_port
+ use tcss_usb3_port1 as usb3_port
+ device generic 0 alias conn0 on end
+ end
+ chip drivers/intel/pmc_mux/conn
+ use usb2_port3 as usb2_port
+ use tcss_usb3_port3 as usb3_port
+ device generic 1 alias conn1 on end
+ end
+ end
+ end
+ end
+ device ref tcss_xhci on
+ chip drivers/usb/acpi
+ device ref tcss_root_hub on
+ chip drivers/usb/acpi
+ register "desc" = ""USB3 Type-C Port C0 (MLB)""
+ register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+ register "use_custom_pld" = "true"
+ register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, RIGHT, ACPI_PLD_GROUP(1, 1))"
+ device ref tcss_usb3_port1 on end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""USB3 Type-C Port C2 (MLB)""
+ register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+ register "use_custom_pld" = "true"
+ register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(2, 1))"
+ device ref tcss_usb3_port3 on end
+ end
+ end
+ end
+ end
+ device ref xhci on
+ chip drivers/usb/acpi
+ device ref xhci_root_hub on
+ chip drivers/usb/acpi
+ register "desc" = ""USB2 Type-C Port C0 (MLB)""
+ register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+ register "use_custom_pld" = "true"
+ register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, RIGHT, ACPI_PLD_GROUP(1, 1))"
+ device ref usb2_port1 on end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""USB2 Type-C Port C2 (MLB)""
+ register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+ register "use_custom_pld" = "true"
+ register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(2, 1))"
+ device ref usb2_port3 on end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""USB2 MMC""
+ register "type" = "UPC_TYPE_EXPRESSCARD"
+ device ref usb2_port4 on end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""USB2 Type-A Port A1 (DB)""
+ register "type" = "UPC_TYPE_A"
+ register "use_custom_pld" = "true"
+ register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, RIGHT, ACPI_PLD_GROUP(1, 2))"
+ device ref usb2_port5 on end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""USB2 Camera""
+ register "type" = "UPC_TYPE_INTERNAL"
+ device ref usb2_port6 on end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""USB2 Bluetooth""
+ register "type" = "UPC_TYPE_INTERNAL"
+ register "reset_gpio" =
+ "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D4)"
+ device ref usb2_port10 on end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""USB3 Type-A Port A1 (DB)""
+ register "type" = "UPC_TYPE_USB3_A"
+ register "use_custom_pld" = "true"
+ register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, RIGHT, ACPI_PLD_GROUP(1, 2))"
+ device ref usb3_port3 on end
+ end
+ end
+ end
+ end
+ end
end
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-28 06:46:08 +0000