summaryrefslogtreecommitdiff
path: root/src/mainboard
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard')
-rw-r--r--src/mainboard/siemens/mc_apl1/brd_gpio.h38
-rw-r--r--src/mainboard/siemens/mc_apl1/devicetree.cb227
-rw-r--r--src/mainboard/siemens/mc_apl1/mc_apl1.fmd20
-rw-r--r--src/mainboard/siemens/mc_apl1/romstage.c75
4 files changed, 93 insertions, 267 deletions
diff --git a/src/mainboard/siemens/mc_apl1/brd_gpio.h b/src/mainboard/siemens/mc_apl1/brd_gpio.h
index 33b839bbca..564ee69504 100644
--- a/src/mainboard/siemens/mc_apl1/brd_gpio.h
+++ b/src/mainboard/siemens/mc_apl1/brd_gpio.h
@@ -2,6 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2015-2016 Intel Corporation. All Rights Reserved.
+ * Copyright (C) 2017 Siemens AG
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -18,11 +19,7 @@
#if ENV_ROMSTAGE
static const struct pad_config gpio_table[] = {
- PAD_CFG_NF(GPIO_134, NATIVE, DEEP, NF2), /* ISH_I2C0_SDA/IO-OD */
- PAD_CFG_NF(GPIO_135, NATIVE, DEEP, NF2), /* ISH_I2C0_SCL/IO-OD */
- PAD_CFG_NF(GPIO_136, NATIVE, DEEP, NF2), /* ISH_I2C1_SDA/IO-OD */
- PAD_CFG_NF(GPIO_137, NATIVE, DEEP, NF2), /* ISH_I2C1_SCL/IO-OD */
-
+ /* Debug tracing. */
PAD_CFG_NF(GPIO_0, NATIVE, DEEP, NF1),
PAD_CFG_NF(GPIO_1, NATIVE, DEEP, NF1),
PAD_CFG_NF(GPIO_2, NATIVE, DEEP, NF1),
@@ -33,30 +30,25 @@ static const struct pad_config gpio_table[] = {
PAD_CFG_NF(GPIO_7, NATIVE, DEEP, NF1),
PAD_CFG_NF(GPIO_8, NATIVE, DEEP, NF1),
- /* EXP_I2C_SDA and I2C_PSS_SDA and I2C_2_SDA_IOEXP */
- PAD_CFG_NF(GPIO_7, NATIVE, DEEP, NF1),
- /* EXP_I2C_SCL and I2C_PSS_SCL and I2C_2_SCL_IOEXP */
- PAD_CFG_NF(GPIO_8, NATIVE, DEEP, NF1),
-
- PAD_CFG_GPO(GPIO_152, 0, DEEP), /* PERST# */
- PAD_CFG_GPO(GPIO_19, 1, DEEP), /* PFET */
- PAD_CFG_GPO(GPIO_13, 0, DEEP), /* PERST# */
- PAD_CFG_GPO(GPIO_17, 1, DEEP), /* PFET */
- PAD_CFG_GPO(GPIO_15, 0, DEEP), /* PERST# */
+ PAD_CFG_GPI(GPIO_152, DN_20K, DEEP), /* Unused */
+ PAD_CFG_GPI(GPIO_19, UP_20K, DEEP), /* Unused */
+ PAD_CFG_GPI(GPIO_13, UP_20K, DEEP), /* Unused */
+ PAD_CFG_GPI(GPIO_17, UP_20K, DEEP), /* Unused */
+ PAD_CFG_GPI(GPIO_15, UP_20K, DEEP), /* Unused */
PAD_CFG_NF(GPIO_210, NATIVE, DEEP, NF1), /* CLKREQ# */
PAD_CFG_NF(SMB_CLK, NATIVE, DEEP, NF1),
PAD_CFG_NF(SMB_DATA, NATIVE, DEEP, NF1),
- PAD_CFG_NF(LPC_ILB_SERIRQ, NATIVE, DEEP, NF1),
+ PAD_CFG_NF(LPC_ILB_SERIRQ, UP_20K, DEEP, NF1),
PAD_CFG_NF(LPC_CLKOUT0, NATIVE, DEEP, NF1),
- PAD_CFG_NF(LPC_CLKOUT1, NATIVE, DEEP, NF1),
- PAD_CFG_NF(LPC_AD0, NATIVE, DEEP, NF1),
- PAD_CFG_NF(LPC_AD1, NATIVE, DEEP, NF1),
- PAD_CFG_NF(LPC_AD2, NATIVE, DEEP, NF1),
- PAD_CFG_NF(LPC_AD3, NATIVE, DEEP, NF1),
- PAD_CFG_NF(LPC_CLKRUNB, NATIVE, DEEP, NF1),
- PAD_CFG_NF(LPC_FRAMEB, NATIVE, DEEP, NF1),
+ PAD_CFG_GPI(LPC_CLKOUT1, UP_20K, DEEP), /* LPC_CLKOUT1 -- unused */
+ PAD_CFG_NF(LPC_AD0, UP_20K, DEEP, NF1),
+ PAD_CFG_NF(LPC_AD1, UP_20K, DEEP, NF1),
+ PAD_CFG_NF(LPC_AD2, UP_20K, DEEP, NF1),
+ PAD_CFG_NF(LPC_AD3, UP_20K, DEEP, NF1),
+ PAD_CFG_NF(LPC_CLKRUNB, UP_20K, DEEP, NF1),
+ PAD_CFG_NF(LPC_FRAMEB, UP_20K, DEEP, NF1),
};
#endif
diff --git a/src/mainboard/siemens/mc_apl1/devicetree.cb b/src/mainboard/siemens/mc_apl1/devicetree.cb
index ce01a8b82b..c82896c7fc 100644
--- a/src/mainboard/siemens/mc_apl1/devicetree.cb
+++ b/src/mainboard/siemens/mc_apl1/devicetree.cb
@@ -4,221 +4,54 @@ chip soc/intel/apollolake
device lapic 0 on end
end
- register "pcie_rp0_clkreq_pin" = "0" # wifi/bt
# Disable unused clkreq of PCIe root ports
+ register "pcie_rp0_clkreq_pin" = "3" # PCIe-PCI-Bridge
register "pcie_rp1_clkreq_pin" = "CLKREQ_DISABLED"
- register "pcie_rp2_clkreq_pin" = "CLKREQ_DISABLED"
- register "pcie_rp3_clkreq_pin" = "CLKREQ_DISABLED"
+ register "pcie_rp2_clkreq_pin" = "0" # MACPHY
+ register "pcie_rp3_clkreq_pin" = "1" # MACPHY
register "pcie_rp4_clkreq_pin" = "CLKREQ_DISABLED"
register "pcie_rp5_clkreq_pin" = "CLKREQ_DISABLED"
- # GPIO for PERST_0
- # If the Board has PERST_0 signal, assign the GPIO
- # If the Board does not have PERST_0, assign GPIO_PRT0_UDEF
- register "prt0_gpio" = "GPIO_122"
-
- # EMMC TX DATA Delay 1
- # Refer to EDS-Vol2-22.3.
- # [14:8] steps of delay for HS400, each 125ps.
- # [6:0] steps of delay for SDR104/HS200, each 125ps.
- register "emmc_tx_data_cntl1" = "0x0C16"
-
- # EMMC TX DATA Delay 2
- # Refer to EDS-Vol2-22.3.
- # [30:24] steps of delay for SDR50, each 125ps.
- # [22:16] steps of delay for DDR50, each 125ps.
- # [14:8] steps of delay for SDR25/HS50, each 125ps.
- # [6:0] steps of delay for SDR12, each 125ps.
- register "emmc_tx_data_cntl2" = "0x28162828"
-
- # EMMC RX CMD/DATA Delay 1
- # Refer to EDS-Vol2-22.3.
- # [30:24] steps of delay for SDR50, each 125ps.
- # [22:16] steps of delay for DDR50, each 125ps.
- # [14:8] steps of delay for SDR25/HS50, each 125ps.
- # [6:0] steps of delay for SDR12, each 125ps.
- register "emmc_rx_cmd_data_cntl1" = "0x00181717"
-
- # EMMC RX CMD/DATA Delay 2
- # Refer to EDS-Vol2-22.3.
- # [17:16] stands for Rx Clock before Output Buffer
- # [14:8] steps of delay for Auto Tuning Mode, each 125ps.
- # [6:0] steps of delay for HS200, each 125ps.
- register "emmc_rx_cmd_data_cntl2" = "0x10008"
-
- # Enable DPTF
- register "dptf_enable" = "1"
-
- # PL1 override 12000 mW: the energy calculation is wrong with the
- # current VR solution. Experiments show that SoC TDP max (6W) can
- # be reached when RAPL PL1 is set to 12W.
- register "tdp_pl1_override_mw" = "12000"
- # Set RAPL PL2 to 15W.
- register "tdp_pl2_override_mw" = "15000"
-
- # Enable Audio Clock and Power gating
- register "hdaudio_clk_gate_enable" = "1"
- register "hdaudio_pwr_gate_enable" = "1"
- register "hdaudio_bios_config_lockdown" = "1"
-
- # Enable lpss s0ix
- register "lpss_s0ix_enable" = "1"
-
- # GPE configuration
- # Note that GPE events called out in ASL code rely on this
- # route, i.e., if this route changes then the affected GPE
- # offset bits also need to be changed. This sets the PMC register
- # GPE_CFG fields.
- register "gpe0_dw1" = "PMC_GPE_N_31_0"
- register "gpe0_dw2" = "PMC_GPE_N_63_32"
- register "gpe0_dw3" = "PMC_GPE_SW_31_0"
-
- # Enable I2C0 for audio codec at 400kHz
- register "i2c[0]" = "{
- .speed = I2C_SPEED_FAST,
- .rise_time_ns = 104,
- .fall_time_ns = 52,
- }"
-
- # Enable I2C2 bus early for TPM at 400kHz
- register "i2c[2]" = "{
- .early_init = 1,
- .speed = I2C_SPEED_FAST,
- .rise_time_ns = 57,
- .fall_time_ns = 28,
- }"
-
- # touchscreen at 400kHz
- register "i2c[3]" = "{
- .speed = I2C_SPEED_FAST,
- .rise_time_ns = 76,
- .fall_time_ns = 164,
- }"
-
- # trackpad at 400kHz
- register "i2c[4]" = "{
- .speed = I2C_SPEED_FAST,
- .rise_time_ns = 114,
- .fall_time_ns = 164,
- }"
-
- # digitizer at 400kHz
- register "i2c[5]" = "{
- .speed = I2C_SPEED_FAST,
- .rise_time_ns = 152,
- .fall_time_ns = 30,
- }"
-
- # Minimum SLP S3 assertion width 28ms.
- register "slp_s3_assertion_width_usecs" = "28000"
-
device domain 0 on
device pci 00.0 on end # - Host Bridge
- device pci 00.1 on end # - DPTF
- device pci 00.2 on end # - NPK
- device pci 02.0 on end # - Gen
- device pci 03.0 on end # - Iunit
+ device pci 00.1 off end # - DPTF
+ device pci 00.2 off end # - NPK
+ device pci 02.0 on end # - Gen - Display
+ device pci 03.0 off end # - Iunit
device pci 0d.0 on end # - P2SB
- device pci 0d.1 on end # - PMC
+ device pci 0d.1 off end # - PMC
device pci 0d.2 on end # - SPI
- device pci 0d.3 on end # - Shared SRAM
- device pci 0e.0 on # - Audio
- chip drivers/generic/max98357a
- register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_76)"
- register "sdmode_delay" = "5"
- device generic 0 on end
- end
- end
- device pci 11.0 off end # - ISH
- device pci 12.0 off end # - SATA
- device pci 13.0 off end # - Root Port 2 - PCIe-A 0
- device pci 13.1 off end # - Root Port 3 - PCIe-A 1
- device pci 13.2 off end # - Root Port 4 - PCIe-A 2
- device pci 13.3 off end # - Root Port 5 - PCIe-A 3
- device pci 14.0 on
- chip drivers/intel/wifi
- register "wake" = "GPE0_DW3_00"
- device pci 00.0 on end
- end
- end # - Root Port 0 - PCIe-B 0 - Wifi
- device pci 14.1 off end # - Root Port 1 - PCIe-B 1
+ device pci 0d.3 off end # - Shared SRAM
+ device pci 0e.0 off end # - Audio
+ device pci 11.0 on end # - ISH
+ device pci 12.0 on end # - SATA
+ device pci 13.0 on end # - RP 2 - PCIe A 0 - MACPHY
+ device pci 13.1 on end # - RP 3 - PCIe A 1 - MACPHY
+ device pci 13.2 off end # - RP 4 - PCIe-A 2
+ device pci 13.3 off end # - RP 5 - PCIe-A 3
+ device pci 14.0 on end # - RP 0 - PCIe-B 0 - PCIe-PCI-Bridge
+ device pci 14.1 off end # - RP 1 - PCIe-B 1
device pci 15.0 on end # - XHCI
- device pci 15.1 off end # - XDCI
- device pci 16.0 on # - I2C 0
- chip drivers/i2c/da7219
- register "irq" = "IRQ_LEVEL_LOW(GPIO_116_IRQ)"
- register "btn_cfg" = "50"
- register "mic_det_thr" = "500"
- register "jack_ins_deb" = "20"
- register "jack_det_rate" = ""32ms_64ms""
- register "jack_rem_deb" = "1"
- register "a_d_btn_thr" = "0xa"
- register "d_b_btn_thr" = "0x16"
- register "b_c_btn_thr" = "0x21"
- register "c_mic_btn_thr" = "0x3e"
- register "btn_avg" = "4"
- register "adc_1bit_rpt" = "1"
- register "micbias_lvl" = "2600"
- register "mic_amp_in_sel" = ""diff""
- device i2c 1a on end
- end
- end
- device pci 16.1 on end # - I2C 1
- device pci 16.2 on
- chip drivers/i2c/tpm
- register "hid" = ""GOOG0005""
- register "irq" = "IRQ_EDGE_LOW(GPIO_28_IRQ)"
- device i2c 50 on end
- end
- end # - I2C 2
- device pci 16.3 on
- chip drivers/i2c/generic
- register "hid" = ""ELAN0001""
- register "desc" = ""ELAN Touchscreen""
- register "irq" = "IRQ_EDGE_LOW(GPIO_21_IRQ)"
- register "probed" = "1"
- register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_36)"
- register "reset_delay_ms" = "20"
- register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_152)"
- register "enable_delay_ms" = "1"
- register "has_power_resource" = "1"
- device i2c 10 on end
- end
- end # - I2C 3
- device pci 17.0 on
- chip drivers/i2c/generic
- register "hid" = ""ELAN0000""
- register "desc" = ""ELAN Touchpad""
- register "irq" = "IRQ_EDGE_LOW(GPIO_18_IRQ)"
- register "wake" = "GPE0_DW1_15"
- register "probed" = "1"
- device i2c 15 on end
- end
- end # - I2C 4
- device pci 17.1 on
- chip drivers/i2c/wacom
- register "generic" = "{
- .hid = WCOM50C1_HID,
- .cid = PNP0C50_CID,
- .desc = WCOM_DT_DESC,
- .irq = IRQ_LEVEL_LOW(GPIO_13_IRQ),
- }"
- register "hid_desc_reg_offset" = "0x1"
- device i2c 0x9 on end
- end
- end # - I2C 5
+ device pci 15.1 on end # - XDCI
+ device pci 16.0 on end # - I2C 0
+ device pci 16.1 off end # - I2C 1
+ device pci 16.2 off end # - I2C 2
+ device pci 16.3 off end # - I2C 3
+ device pci 17.0 off end # - I2C 4
+ device pci 17.1 off end # - I2C 5
device pci 17.2 off end # - I2C 6
- device pci 17.3 off end # - I2C 7
+ device pci 17.3 on end # - I2C 7
device pci 18.0 on end # - UART 0
device pci 18.1 on end # - UART 1
device pci 18.2 on end # - UART 2
- device pci 18.3 off end # - UART 3
- device pci 19.0 on end # - SPI 0
+ device pci 18.3 on end # - UART 3
+ device pci 19.0 off end # - SPI 0
device pci 19.1 off end # - SPI 1
device pci 19.2 off end # - SPI 2
- device pci 1a.0 on end # - PWM
+ device pci 1a.0 off end # - PWM
device pci 1b.0 on end # - SDCARD
device pci 1c.0 on end # - eMMC
+ device pci 1d.0 off end # - UFS
device pci 1e.0 off end # - SDIO
device pci 1f.0 on end # - LPC
device pci 1f.1 on end # - SMBUS
diff --git a/src/mainboard/siemens/mc_apl1/mc_apl1.fmd b/src/mainboard/siemens/mc_apl1/mc_apl1.fmd
index 3da8467431..432e8de284 100644
--- a/src/mainboard/siemens/mc_apl1/mc_apl1.fmd
+++ b/src/mainboard/siemens/mc_apl1/mc_apl1.fmd
@@ -1,15 +1,16 @@
FLASH 16M {
- WP_RO@0x0 0x400000 {
+ WP_RO@0x0 0xe00000 {
SI_DESC@0x0 0x1000
- IFWI@0x1000 0x1ff000
- RO_VPD@0x200000 0x4000
- RO_SECTION@0x204000 0x1fc000 {
+ IFWI@0x1000 0x23f000
+ RO_VPD@0x240000 0x4000
+ RO_SECTION@0x244000 0xbbc000 {
FMAP@0x0 0x800
- COREBOOT(CBFS)@0x1000 0x1bb000
- RO_UNUSED@0x1bc000 0x40000
+ RO_UNUSED_1@0x800 0x800
+ COREBOOT(CBFS)@0x1000 0xbb9000
+ RO_UNUSED_2@0xbba000 0x1000
}
}
- MISC_RW@0x400000 0x30000 {
+ MISC_RW@0xe00000 0x30000 {
UNIFIED_MRC_CACHE@0x0 0x21000 {
RECOVERY_MRC_CACHE@0x0 0x10000
RW_MRC_CACHE@0x10000 0x10000
@@ -23,9 +24,8 @@ FLASH 16M {
RW_VPD@0x28000 0x2000
RW_NVRAM@0x2a000 0x6000
}
- RW_LEGACY(CBFS)@0xd30000 0x200000
- BIOS_UNUSABLE@0xf30000 0x4f000
- DEVICE_EXTENSION@0xf7f000 0x80000
+ BIOS_UNUSABLE@0xe30000 0xcf000
+ DEVICE_EXTENSION@0xeff000 0x100000
# Currently, it is required that the BIOS region be a multiple of 8KiB.
# This is required so that the recovery mechanism can find SIGN_CSE
# region aligned to 4K at the center of BIOS region. Since the
diff --git a/src/mainboard/siemens/mc_apl1/romstage.c b/src/mainboard/siemens/mc_apl1/romstage.c
index 5c784ba629..9dd42bcfec 100644
--- a/src/mainboard/siemens/mc_apl1/romstage.c
+++ b/src/mainboard/siemens/mc_apl1/romstage.c
@@ -2,6 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright 2016 Google Inc.
+ * Copyright (C) 2017 Siemens AG
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -20,28 +21,28 @@
#include "brd_gpio.h"
static const uint8_t Ch0_Bit_swizzling[] = {
- 0x09, 0x0e, 0x0c, 0x0d, 0x0a, 0x0b, 0x08, 0x0f,
- 0x05, 0x06, 0x01, 0x00, 0x02, 0x07, 0x04, 0x03,
- 0x1a, 0x1f, 0x1c, 0x1b, 0x1d, 0x19, 0x18, 0x1e,
- 0x14, 0x16, 0x17, 0x11, 0x12, 0x13, 0x10, 0x15
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
static const uint8_t Ch1_Bit_swizzling[] = {
- 0x06, 0x07, 0x05, 0x04, 0x03, 0x01, 0x00, 0x02,
- 0x0c, 0x0a, 0x0b, 0x0d, 0x0e, 0x08, 0x09, 0x0f,
- 0x14, 0x10, 0x16, 0x15, 0x12, 0x11, 0x13, 0x17,
- 0x1e, 0x1c, 0x1d, 0x19, 0x18, 0x1a, 0x1b, 0x1f
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
static const uint8_t Ch2_Bit_swizzling[] = {
- 0x0f, 0x09, 0x08, 0x0b, 0x0c, 0x0d, 0x0e, 0x0a,
- 0x05, 0x02, 0x00, 0x03, 0x06, 0x07, 0x01, 0x04,
- 0x19, 0x1c, 0x1e, 0x1f, 0x1a, 0x1b, 0x18, 0x1d,
- 0x14, 0x17, 0x16, 0x15, 0x12, 0x13, 0x10, 0x11
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
static const uint8_t Ch3_Bit_swizzling[] = {
- 0x03, 0x04, 0x06, 0x05, 0x00, 0x01, 0x02, 0x07,
- 0x0b, 0x0a, 0x08, 0x09, 0x0e, 0x0c, 0x0f, 0x0d,
- 0x11, 0x17, 0x13, 0x10, 0x15, 0x16, 0x14, 0x12,
- 0x1c, 0x1d, 0x1a, 0x19, 0x1e, 0x1b, 0x18, 0x1f
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
void mainboard_memory_init_params(FSPM_UPD *memupd)
@@ -51,59 +52,59 @@ void mainboard_memory_init_params(FSPM_UPD *memupd)
/* DRAM Config settings */
memupd->FspmConfig.Package = 0x1;
- memupd->FspmConfig.Profile = 0xB;
+ memupd->FspmConfig.Profile = 0x19;
memupd->FspmConfig.MemoryDown = 0x1;
- memupd->FspmConfig.DDR3LPageSize = 0x0;
+ memupd->FspmConfig.DDR3LPageSize = 0x2;
memupd->FspmConfig.DDR3LASR = 0x0;
- memupd->FspmConfig.ScramblerSupport = 0x1;
- memupd->FspmConfig.ChannelHashMask = 0x36;
- memupd->FspmConfig.SliceHashMask = 0x9;
- memupd->FspmConfig.InterleavedMode = 0x2;
+ memupd->FspmConfig.ScramblerSupport = 0x0;
+ memupd->FspmConfig.ChannelHashMask = 0x0;
+ memupd->FspmConfig.SliceHashMask = 0x0;
+ memupd->FspmConfig.InterleavedMode = 0x0;
memupd->FspmConfig.ChannelsSlicesEnable = 0x0;
- memupd->FspmConfig.MinRefRate2xEnable = 0x0;
+ memupd->FspmConfig.MinRefRate2xEnable = 0x1;
memupd->FspmConfig.DualRankSupportEnable = 0x1;
memupd->FspmConfig.RmtMode = 0x0;
- memupd->FspmConfig.MemorySizeLimit = 0x1800;
+ memupd->FspmConfig.MemorySizeLimit = 0x1000;
memupd->FspmConfig.LowMemoryMaxValue = 0x0;
memupd->FspmConfig.DisableFastBoot = 0x0;
memupd->FspmConfig.HighMemoryMaxValue = 0x0;
memupd->FspmConfig.DIMM0SPDAddress = 0x0;
memupd->FspmConfig.DIMM1SPDAddress = 0x0;
- memupd->FspmConfig.Ch0_RankEnable = 0x3;
+ memupd->FspmConfig.Ch0_RankEnable = 0x1;
memupd->FspmConfig.Ch0_DeviceWidth = 0x1;
- memupd->FspmConfig.Ch0_DramDensity = 0x2;
+ memupd->FspmConfig.Ch0_DramDensity = 0x0;
memupd->FspmConfig.Ch0_Option = 0x3;
- memupd->FspmConfig.Ch0_OdtConfig = 0x0;
+ memupd->FspmConfig.Ch0_OdtConfig = 0x1;
memupd->FspmConfig.Ch0_TristateClk1 = 0x0;
memupd->FspmConfig.Ch0_Mode2N = 0x0;
memupd->FspmConfig.Ch0_OdtLevels = 0x0;
- memupd->FspmConfig.Ch1_RankEnable = 0x3;
+ memupd->FspmConfig.Ch1_RankEnable = 0x1;
memupd->FspmConfig.Ch1_DeviceWidth = 0x1;
- memupd->FspmConfig.Ch1_DramDensity = 0x2;
+ memupd->FspmConfig.Ch1_DramDensity = 0x0;
memupd->FspmConfig.Ch1_Option = 0x3;
- memupd->FspmConfig.Ch1_OdtConfig = 0x0;
+ memupd->FspmConfig.Ch1_OdtConfig = 0x1;
memupd->FspmConfig.Ch1_TristateClk1 = 0x0;
memupd->FspmConfig.Ch1_Mode2N = 0x0;
memupd->FspmConfig.Ch1_OdtLevels = 0x0;
- memupd->FspmConfig.Ch2_RankEnable = 0x3;
+ memupd->FspmConfig.Ch2_RankEnable = 0x0;
memupd->FspmConfig.Ch2_DeviceWidth = 0x1;
- memupd->FspmConfig.Ch2_DramDensity = 0x2;
+ memupd->FspmConfig.Ch2_DramDensity = 0x0;
memupd->FspmConfig.Ch2_Option = 0x3;
memupd->FspmConfig.Ch2_OdtConfig = 0x0;
memupd->FspmConfig.Ch2_TristateClk1 = 0x0;
memupd->FspmConfig.Ch2_Mode2N = 0x0;
memupd->FspmConfig.Ch2_OdtLevels = 0x0;
- memupd->FspmConfig.Ch3_RankEnable = 0x3;
+ memupd->FspmConfig.Ch3_RankEnable = 0x0;
memupd->FspmConfig.Ch3_DeviceWidth = 0x1;
- memupd->FspmConfig.Ch3_DramDensity = 0x2;
+ memupd->FspmConfig.Ch3_DramDensity = 0x0;
memupd->FspmConfig.Ch3_Option = 0x3;
memupd->FspmConfig.Ch3_OdtConfig = 0x0;
memupd->FspmConfig.Ch3_TristateClk1 = 0x0;
memupd->FspmConfig.Ch3_Mode2N = 0x0;
memupd->FspmConfig.Ch3_OdtLevels = 0x0;
- memupd->FspmConfig.RmtCheckRun = 0x0;
+ memupd->FspmConfig.RmtCheckRun = 0x3;
memupd->FspmConfig.MrcDataSaving = 0x0;
- memupd->FspmConfig.MrcFastBoot = 0x0;
+ memupd->FspmConfig.MrcFastBoot = 0x1;
memcpy(memupd->FspmConfig.Ch0_Bit_swizzling, &Ch0_Bit_swizzling,
sizeof(Ch0_Bit_swizzling));
@@ -114,6 +115,6 @@ void mainboard_memory_init_params(FSPM_UPD *memupd)
memcpy(memupd->FspmConfig.Ch3_Bit_swizzling, &Ch3_Bit_swizzling,
sizeof(Ch3_Bit_swizzling));
- memupd->FspmConfig.RmtMarginCheckScaleHighThreshold = 0x0;
+ memupd->FspmConfig.RmtMarginCheckScaleHighThreshold = 0xC8;
memupd->FspmConfig.MsgLevelMask = 0x0;
}
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-03 05:42:43 +0000