summaryrefslogtreecommitdiff
path: root/src/mainboard
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard')
-rw-r--r--src/mainboard/lippert/Kconfig7
-rw-r--r--src/mainboard/lippert/toucan-af/BiosCallOuts.c67
-rw-r--r--src/mainboard/lippert/toucan-af/BiosCallOuts.h10
-rw-r--r--src/mainboard/lippert/toucan-af/Kconfig24
-rw-r--r--src/mainboard/lippert/toucan-af/PlatformGnbPcie.c10
-rw-r--r--src/mainboard/lippert/toucan-af/PlatformGnbPcieComplex.h2
-rw-r--r--src/mainboard/lippert/toucan-af/acpi/superio.asl39
-rw-r--r--src/mainboard/lippert/toucan-af/buildOpts.c1
-rw-r--r--src/mainboard/lippert/toucan-af/devicetree.cb113
-rw-r--r--src/mainboard/lippert/toucan-af/dsdt.asl2
-rw-r--r--src/mainboard/lippert/toucan-af/mainboard.c72
-rw-r--r--src/mainboard/lippert/toucan-af/platform_cfg.h40
-rw-r--r--src/mainboard/lippert/toucan-af/romstage.c6
13 files changed, 231 insertions, 162 deletions
diff --git a/src/mainboard/lippert/Kconfig b/src/mainboard/lippert/Kconfig
index 8797a14241..cf5288e9da 100644
--- a/src/mainboard/lippert/Kconfig
+++ b/src/mainboard/lippert/Kconfig
@@ -15,10 +15,12 @@ config BOARD_LIPPERT_ROADRUNNER_LX
bool "Cool RoadRunner-LX"
config BOARD_LIPPERT_SPACERUNNER_LX
bool "Cool SpaceRunner-LX"
+config BOARD_LIPPERT_TOUCAN_AF
+ bool "Toucan-AF (+W83627DHG SIO)"
endchoice
-if BOARD_LIPPERT_FRONTRUNNER_AF
+if BOARD_LIPPERT_FRONTRUNNER_AF || BOARD_LIPPERT_TOUCAN_AF
# No code, but two Kconfig options need to know this ...
choice
prompt "AMD Fusion CPU model"
@@ -47,7 +49,7 @@ config FUSION_G_T56N
If unsure check with "grep model /proc/cpuinfo".
endchoice
-endif # BOARD_LIPPERT_FRONTRUNNER_AF
+endif # BOARD_LIPPERT_FRONTRUNNER_AF || BOARD_LIPPERT_TOUCAN_AF
source "src/mainboard/lippert/frontrunner/Kconfig"
source "src/mainboard/lippert/frontrunner-af/Kconfig"
@@ -55,6 +57,7 @@ source "src/mainboard/lippert/hurricane-lx/Kconfig"
source "src/mainboard/lippert/literunner-lx/Kconfig"
source "src/mainboard/lippert/roadrunner-lx/Kconfig"
source "src/mainboard/lippert/spacerunner-lx/Kconfig"
+source "src/mainboard/lippert/toucan-af/Kconfig"
config MAINBOARD_VENDOR
string
diff --git a/src/mainboard/lippert/toucan-af/BiosCallOuts.c b/src/mainboard/lippert/toucan-af/BiosCallOuts.c
index 9bad4f4490..936ce9bf78 100644
--- a/src/mainboard/lippert/toucan-af/BiosCallOuts.c
+++ b/src/mainboard/lippert/toucan-af/BiosCallOuts.c
@@ -22,7 +22,6 @@
#include "dimmSpd.h"
#include "BiosCallOuts.h"
#include "heapManager.h"
-#include "SB800.h"
STATIC BIOS_CALLOUT_STRUCT BiosCallouts[] =
{
@@ -445,9 +444,25 @@ AGESA_STATUS BiosHookBeforeDQSTraining (UINT32 Func, UINT32 Data, VOID *ConfigPt
/* Call the host environment interface to provide a user hook opportunity. */
AGESA_STATUS BiosHookBeforeDramInit (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
{
- // Unlike e.g. AMD Inagua, Persimmon is unable to vary the RAM voltage.
- // Make sure the right speed settings are selected.
- ((MEM_DATA_STRUCT*)ConfigPtr)->ParameterListPtr->DDR3Voltage = VOLT1_5;
+ MEM_DATA_STRUCT *MemData = ConfigPtr;
+
+ printk(BIOS_INFO, "Setting DDR3 voltage: ");
+ FCH_IOMUX(65) = 1; // GPIO65: VMEM_LV_EN# lowers VMEM from 1.5 to 1.35V
+ switch (MemData->ParameterListPtr->DDR3Voltage) {
+ case VOLT1_25: // board is not able to provide this
+ MemData->ParameterListPtr->DDR3Voltage = VOLT1_35; // sorry
+ printk(BIOS_INFO, "can't provide 1.25 V, using ");
+ // fall through
+ default: // AGESA.h says in mixed case 1.5V DIMMs get excluded
+ case VOLT1_35:
+ FCH_GPIO(65) = 0x08; // = output, disable PU, set to 0
+ printk(BIOS_INFO, "1.35 V\n");
+ break;
+ case VOLT1_5:
+ FCH_GPIO(65) = 0xC8; // = output, disable PU, set to 1
+ printk(BIOS_INFO, "1.5 V\n");
+ }
+
return AGESA_SUCCESS;
}
@@ -465,45 +480,7 @@ AGESA_STATUS BiosHookBeforeExitSelfRefresh (UINT32 Func, UINT32 Data, VOID *Conf
/* PCIE slot reset control */
AGESA_STATUS BiosGnbPcieSlotReset (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
{
- AGESA_STATUS Status;
- UINTN FcnData;
- PCIe_SLOT_RESET_INFO *ResetInfo;
-
- UINT32 GpioMmioAddr;
- UINT32 AcpiMmioAddr;
- UINT8 Data8;
- UINT16 Data16;
-
- FcnData = Data;
- ResetInfo = ConfigPtr;
- // Get SB800 MMIO Base (AcpiMmioAddr)
- WriteIo8(0xCD6, 0x27);
- Data8 = ReadIo8(0xCD7);
- Data16=Data8<<8;
- WriteIo8(0xCD6, 0x26);
- Data8 = ReadIo8(0xCD7);
- Data16|=Data8;
- AcpiMmioAddr = (UINT32)Data16 << 16;
- Status = AGESA_UNSUPPORTED;
- GpioMmioAddr = AcpiMmioAddr + GPIO_BASE;
- switch (ResetInfo->ResetId)
- {
- case 46: // GPIO50 = SBGPIO_PCIE_RST# affects LAN0, LAN1, PCIe slot
- switch (ResetInfo->ResetControl) {
- case AssertSlotReset:
- Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG50);
- Data8 &= ~(UINT8)BIT6 ;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG50, Data8);
- Status = AGESA_SUCCESS;
- break;
- case DeassertSlotReset:
- Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG50);
- Data8 |= BIT6 ;
- Write64Mem8 (GpioMmioAddr+SB_GPIO_REG50, Data8);
- Status = AGESA_SUCCESS;
- break;
- }
- break;
- }
- return Status;
+ // COM Express doesn't provide dedicated resets for individual lanes
+ // and it's not needed for the on-board Intel I210 GbE controller.
+ return AGESA_UNSUPPORTED;
}
diff --git a/src/mainboard/lippert/toucan-af/BiosCallOuts.h b/src/mainboard/lippert/toucan-af/BiosCallOuts.h
index c4f4f709d4..48ee595fa7 100644
--- a/src/mainboard/lippert/toucan-af/BiosCallOuts.h
+++ b/src/mainboard/lippert/toucan-af/BiosCallOuts.h
@@ -22,6 +22,7 @@
#include "Porting.h"
#include "AGESA.h"
+#include "SB800.h"
#define BIOS_HEAP_START_ADDRESS 0x10000 /* HEAP during cold boot */
#define BIOS_HEAP_SIZE 0x20000
@@ -70,4 +71,13 @@ AGESA_STATUS BiosHookBeforeExitSelfRefresh (UINT32 Func, UINT32 Data, VOID *Conf
/* PCIE slot reset control */
AGESA_STATUS BiosGnbPcieSlotReset (UINT32 Func, UINT32 Data, VOID *ConfigPtr);
+/* FCH GPIO access helpers */
+#define FCH_IOMUX(gpio_nr) (*(u8*)(ACPI_MMIO_BASE+IOMUX_BASE+(gpio_nr)))
+#define FCH_PMIO(reg_nr) (*(u8*)(ACPI_MMIO_BASE+PMIO_BASE+(reg_nr)))
+#define FCH_GPIO(gpio_nr) (*(volatile u8*)(ACPI_MMIO_BASE+GPIO_BASE+(gpio_nr)))
+static inline u8 fch_gpio_state(unsigned int gpio_nr)
+{
+ return FCH_GPIO(gpio_nr) >> 7;
+}
+
#endif //_BIOS_CALLOUT_H_
diff --git a/src/mainboard/lippert/toucan-af/Kconfig b/src/mainboard/lippert/toucan-af/Kconfig
index f3f9aa964a..72e6a3bf9a 100644
--- a/src/mainboard/lippert/toucan-af/Kconfig
+++ b/src/mainboard/lippert/toucan-af/Kconfig
@@ -17,7 +17,7 @@
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
#
-if BOARD_AMD_PERSIMMON
+if BOARD_LIPPERT_TOUCAN_AF
config BOARD_SPECIFIC_OPTIONS # dummy
def_bool y
@@ -26,11 +26,17 @@ config BOARD_SPECIFIC_OPTIONS # dummy
select NORTHBRIDGE_AMD_AGESA_FAMILY14_ROOT_COMPLEX
select NORTHBRIDGE_AMD_AGESA_FAMILY14
select SOUTHBRIDGE_AMD_CIMX_SB800
- select SUPERIO_FINTEK_F81865F
+ # The Toucan-AF is meant to work on any COM Express Type 6 baseboard.
+ # The ADLINK ExpressBase-6 baseboard happens to use this SIO:
+ select SUPERIO_WINBOND_W83627DHG
select HAVE_OPTION_TABLE
select HAVE_PIRQ_TABLE
select HAVE_MP_TABLE
- select HAVE_ACPI_RESUME
+ # S3 doesn't work yet, heapManager.c:576 failed last time I tried,
+ # couldn't figure out why. But s3_resume.c (look for "spi_flash_probe")
+ # erases 28 KB and writes 10 KB register dumps to SPI flash on every
+ # boot, wasting 3 s and causing wear! Therefore disable S3 for now.
+ #select HAVE_ACPI_RESUME
select HAVE_HARD_RESET
select SB_HT_CHAIN_UNITID_OFFSET_ONLY
select LIFT_BSP_APIC_ID
@@ -42,7 +48,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy
config MAINBOARD_DIR
string
- default amd/persimmon
+ default lippert/toucan-af
config APIC_ID_OFFSET
hex
@@ -50,7 +56,7 @@ config APIC_ID_OFFSET
config MAINBOARD_PART_NUMBER
string
- default "Persimmon"
+ default "Toucan-AF"
config HW_MEM_HOLE_SIZEK
hex
@@ -58,7 +64,8 @@ config HW_MEM_HOLE_SIZEK
config MAX_CPUS
int
- default 2
+ default 1 if FUSION_G_T40R
+ default 2 if FUSION_G_T56N
config MAX_PHYSICAL_CPUS
int
@@ -111,7 +118,8 @@ config VGA_BIOS
config VGA_BIOS_ID
string
- default "1002,9802"
+ default "1002,9804" if FUSION_G_T40R
+ default "1002,9806" if FUSION_G_T56N
config SB800_AHCI_ROM
bool
@@ -121,4 +129,4 @@ config DRIVERS_PS2_KEYBOARD
bool
default n
-endif # BOARD_AMD_PERSIMMON
+endif # BOARD_LIPPERT_TOUCAN_AF
diff --git a/src/mainboard/lippert/toucan-af/PlatformGnbPcie.c b/src/mainboard/lippert/toucan-af/PlatformGnbPcie.c
index 14839c7f24..ea59c4495e 100644
--- a/src/mainboard/lippert/toucan-af/PlatformGnbPcie.c
+++ b/src/mainboard/lippert/toucan-af/PlatformGnbPcie.c
@@ -60,19 +60,19 @@ PCIe_PORT_DESCRIPTOR PortList [] = {
{
0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array
PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 4, 4),
- PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT4_PORT_PRESENT, GNB_GPP_PORT4_CHANNEL_TYPE, 4, GNB_GPP_PORT4_HOTPLUG_SUPPORT, GNB_GPP_PORT4_SPEED_MODE, GNB_GPP_PORT4_SPEED_MODE, GNB_GPP_PORT4_LINK_ASPM, 46)
+ PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT4_PORT_PRESENT, GNB_GPP_PORT4_CHANNEL_TYPE, 4, GNB_GPP_PORT4_HOTPLUG_SUPPORT, GNB_GPP_PORT4_SPEED_MODE, GNB_GPP_PORT4_SPEED_MODE, GNB_GPP_PORT4_LINK_ASPM, 0)
},
// Initialize Port descriptor (PCIe port, Lanes 5, PCI Device Number 5, ...)
{
0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array
PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 5, 5),
- PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT5_PORT_PRESENT, GNB_GPP_PORT5_CHANNEL_TYPE, 5, GNB_GPP_PORT5_HOTPLUG_SUPPORT, GNB_GPP_PORT5_SPEED_MODE, GNB_GPP_PORT5_SPEED_MODE, GNB_GPP_PORT5_LINK_ASPM, 46)
+ PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT5_PORT_PRESENT, GNB_GPP_PORT5_CHANNEL_TYPE, 5, GNB_GPP_PORT5_HOTPLUG_SUPPORT, GNB_GPP_PORT5_SPEED_MODE, GNB_GPP_PORT5_SPEED_MODE, GNB_GPP_PORT5_LINK_ASPM, 0)
},
// Initialize Port descriptor (PCIe port, Lanes 6, PCI Device Number 6, ...)
{
0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array
PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 6, 6),
- PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT6_PORT_PRESENT, GNB_GPP_PORT6_CHANNEL_TYPE, 6, GNB_GPP_PORT6_HOTPLUG_SUPPORT, GNB_GPP_PORT6_SPEED_MODE, GNB_GPP_PORT6_SPEED_MODE, GNB_GPP_PORT6_LINK_ASPM, 46)
+ PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT6_PORT_PRESENT, GNB_GPP_PORT6_CHANNEL_TYPE, 6, GNB_GPP_PORT6_HOTPLUG_SUPPORT, GNB_GPP_PORT6_SPEED_MODE, GNB_GPP_PORT6_SPEED_MODE, GNB_GPP_PORT6_LINK_ASPM, 0)
},
// Initialize Port descriptor (PCIe port, Lanes 7, PCI Device Number 7, ...)
{
@@ -94,14 +94,14 @@ PCIe_DDI_DESCRIPTOR DdiList [] = {
0, //Descriptor flags
PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 8, 11),
//PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux1, Hdp1)
- {ConnectorTypeLvds, Aux1, Hdp1}
+ {ConnectorTypeAutoDetect, Aux1, Hdp1}
},
// Initialize Ddi descriptor (DDI interface Lanes 12:15, DdB, ...)
{
DESCRIPTOR_TERMINATE_LIST, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array
PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 12, 15),
//PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux2, Hdp2)
- {ConnectorTypeDP, Aux2, Hdp2}
+ {ConnectorTypeAutoDetect, Aux2, Hdp2}
}
};
diff --git a/src/mainboard/lippert/toucan-af/PlatformGnbPcieComplex.h b/src/mainboard/lippert/toucan-af/PlatformGnbPcieComplex.h
index ec8a6e3648..69e26152c4 100644
--- a/src/mainboard/lippert/toucan-af/PlatformGnbPcieComplex.h
+++ b/src/mainboard/lippert/toucan-af/PlatformGnbPcieComplex.h
@@ -50,7 +50,7 @@
#define GNB_GPP_PORT6_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced
//GNB GPP Port7
-#define GNB_GPP_PORT7_PORT_PRESENT 0 //0:Disable 1:Enable
+#define GNB_GPP_PORT7_PORT_PRESENT 1 //0:Disable 1:Enable
#define GNB_GPP_PORT7_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2
#define GNB_GPP_PORT7_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1
#define GNB_GPP_PORT7_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db)
diff --git a/src/mainboard/lippert/toucan-af/acpi/superio.asl b/src/mainboard/lippert/toucan-af/acpi/superio.asl
new file mode 100644
index 0000000000..9be7492f3b
--- /dev/null
+++ b/src/mainboard/lippert/toucan-af/acpi/superio.asl
@@ -0,0 +1,39 @@
+/*
+ * SuperI/O devices
+ *
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 LiPPERT ADLINK Technology GmbH
+ * (Written by Jens Rottmann <JRottmann@LiPPERTembedded.de> for LiPPERT)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* PS/2 Keyboard */
+Device(KBC) {
+ Name(_HID, EISAID("PNP0303"))
+ Name(_CRS, ResourceTemplate() {
+ IO(Decode16, 0x0060, 0x0060, 1, 1)
+ IO(Decode16, 0x0064, 0x0064, 1, 1)
+ IRQNoFlags(){1}
+ })
+}
+
+/* PS/2 Mouse */
+Device(PS2M) {
+ Name(_HID, EISAID("PNP0F13"))
+ Name(_CRS, ResourceTemplate() {
+ IRQNoFlags(){12}
+ })
+}
diff --git a/src/mainboard/lippert/toucan-af/buildOpts.c b/src/mainboard/lippert/toucan-af/buildOpts.c
index c6383a231e..45ffac6413 100644
--- a/src/mainboard/lippert/toucan-af/buildOpts.c
+++ b/src/mainboard/lippert/toucan-af/buildOpts.c
@@ -385,6 +385,7 @@ CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = {
// Byte6Seed, Byte7Seed, ByteEccSeed)
// Specifies the write leveling seed for a channel of a socket.
//
+ HW_RXEN_SEED (ANY_SOCKET, ANY_CHANNEL, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B),
NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2),
NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 1),
PSO_END
diff --git a/src/mainboard/lippert/toucan-af/devicetree.cb b/src/mainboard/lippert/toucan-af/devicetree.cb
index d108a11e5d..fbe2a2caf1 100644
--- a/src/mainboard/lippert/toucan-af/devicetree.cb
+++ b/src/mainboard/lippert/toucan-af/devicetree.cb
@@ -29,10 +29,11 @@ chip northbridge/amd/agesa/family14/root_complex
chip northbridge/amd/agesa/family14 # PCI side of HT root complex
device pci 0.0 on end # Root Complex
device pci 1.0 on end # Internal Graphics P2P bridge 0x980[2456]
- device pci 4.0 on end # PCIE P2P bridge on-board NIC
- device pci 5.0 off end # PCIE P2P bridge
- device pci 6.0 on end # PCIE P2P bridge PCIe slot
- device pci 7.0 off end # PCIE P2P bridge
+ #device pci 1.1 on end # Internal HDMI Audio
+ device pci 4.0 on end # PCIE P2P bridge
+ device pci 5.0 on end # PCIE P2P bridge
+ device pci 6.0 on end # PCIE P2P bridge
+ device pci 7.0 on end # PCIE P2P bridge on-board NIC
device pci 8.0 off end # NB/SB Link P2P bridge
end # agesa northbridge
@@ -47,97 +48,51 @@ chip northbridge/amd/agesa/family14/root_complex
device i2c 50 on end
end
chip drivers/generic/generic #dimm 0-0-1
- device i2c 51 on end
+ device i2c 51 off end
end
end # SM
- device pci 14.1 on end # IDE 0x439c
+ device pci 14.1 off end # IDE 0x439c
device pci 14.2 on end # HDA 0x4383
device pci 14.3 on # LPC 0x439d
- chip superio/fintek/f81865f
- device pnp 4e.0 off # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 4e.3 off end # Parallel Port
- device pnp 4e.4 off end # Hardware Monitor
- device pnp 4e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- end
- device pnp 4e.6 off end # GPIO
- device pnp 4e.a off end # PME
- device pnp 4e.10 on # COM1
+ chip superio/winbond/w83627dhg
+ device pnp 4e.0 off end # Floppy
+ device pnp 4e.1 off end # Parallel Port
+ device pnp 4e.2 on # COM1
io 0x60 = 0x3f8
irq 0x70 = 4
end
- device pnp 4e.11 on # COM2
+ device pnp 4e.3 on # COM2
io 0x60 = 0x2f8
irq 0x70 = 3
end
- end # f81865f
+ device pnp 4e.5 on # Keyboard, Mouse
+ io 0x60 = 0x60
+ io 0x62 = 0x64
+ irq 0x70 = 1
+ irq 0x72 = 12
+ end
+ #device pnp 4e.6 off end # SPI
+ device pnp 4e.307 off end # GPIO6
+ device pnp 4e.8 off end # WDTO, PLED
+ device pnp 4e.009 off end # GPIO2
+ device pnp 4e.109 off end # GPIO3
+ device pnp 4e.209 off end # GPIO4
+ device pnp 4e.309 off end # GPIO5
+ device pnp 4e.A off end # ACPI
+ device pnp 4e.B off end # HW Monitor
+ end # w83627dhg
end #LPC
- device pci 14.4 on end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0}
+ device pci 14.4 off end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0}
device pci 14.5 off end # OHCI FS/LS USB
device pci 14.6 off end # Hudson-E1 GbE MAC: Broadcom BCM5785 (14E4:1699)
- device pci 15.0 off end # PCIe PortA
- device pci 15.1 off end # PCIe PortB
- device pci 15.2 off end # PCIe PortC
- device pci 15.3 off end # PCIe PortD
+ device pci 15.0 on end # PCIe PortA
+ device pci 15.1 on end # PCIe PortB
+ device pci 15.2 on end # PCIe PortC
+ device pci 15.3 on end # PCIe PortD
device pci 16.0 off end # OHCI USB 10-13
device pci 16.2 off end # EHCI USB 10-13
- register "gpp_configuration" = "0" #4:0:0:0 (really need to disable all 4 somehow)
+ register "gpp_configuration" = "4" #1:1:1:1
register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE
-
- #set up SB800 Fan control registers and IMC fan controls
- register "imc_port_address" = "0x6E" # 0x2E and 0x6E are common
- register "fan0_enabled" = "1"
- register "fan1_enabled" = "1"
- register "imc_fan_zone0_enabled" = "1"
- register "imc_fan_zone1_enabled" = "1"
-
- register "fan0_config_vals" = "{ \
- FAN_INPUT_INTERNAL_DIODE, FAN_POLARITY_HIGH, \
- FREQ_25KHZ, 0x08, 0x00, 0x00, 0x00, 0x00,\
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }"
- register "fan1_config_vals" = "{ \
- FAN_INPUT_INTERNAL_DIODE, FAN_POLARITY_HIGH, \
- FREQ_25KHZ, 0x10, 0x00, 0x00, 0x00, 0x00, \
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }"
-
- register "imc_zone0_mode1" = " \
- IMC_MODE1_FAN_ENABLED | IMC_MODE1_FAN_IMC_CONTROLLED | \
- IMC_MODE1_FAN_STEP_MODE | IMC_MODE1_FANOUT0"
- register "imc_zone0_mode2" = " IMC_MODE2_TEMPIN_SB_TSI | \
- IMC_MODE2_FANIN0 | IMC_MODE2_TEMP_AVERAGING_DISABLED"
- register "imc_zone0_temp_offset" = "0x00" # No temp offset
- register "imc_zone0_hysteresis" = "0x05" # Degrees C Hysteresis
- register "imc_zone0_smbus_addr" = "0x98" # Temp Sensor SMBus address
- register "imc_zone0_smbus_num" = "IMC_TEMP_SENSOR_ON_SMBUS_3" # SMBUS number
- register "imc_zone0_pwm_step" = "0x01" # Fan PWM stepping rate
- register "imc_zone0_ramping" = "0x00" # Disable Fan PWM ramping and stepping
-
- register "imc_zone1_mode1" = " \
- IMC_MODE1_FAN_ENABLED | IMC_MODE1_FAN_IMC_CONTROLLED | \
- IMC_MODE1_FAN_STEP_MODE | IMC_MODE1_FANOUT1"
- register "imc_zone1_mode2" = " IMC_MODE2_TEMPIN_SB_TSI | \
- IMC_MODE2_FANIN1 | IMC_MODE2_TEMP_AVERAGING_DISABLED"
- register "imc_zone1_temp_offset" = "0x00" # No temp offset
- register "imc_zone1_hysteresis" = "0x05" # Degrees C Hysteresis
- register "imc_zone1_smbus_addr" = "0x98" # Temp Sensor SMBus address
- register "imc_zone1_smbus_num" = "IMC_TEMP_SENSOR_ON_SMBUS_3" # SMBUS number
- register "imc_zone1_pwm_step" = "0x01" # Fan PWM stepping rate
- register "imc_zone1_ramping" = "0x00" # Disable Fan PWM ramping and stepping
-
- # T56N has a Maximum operating temperature of 90C
- # ZONEX_THRESHOLDS - _AC0 - _AC7, _CRT - Temp Threshold in degrees C
- # ZONEX_FANSPEEDS - Fan speeds as a "percentage"
- register "imc_zone0_thresholds" = "{ 87, 82, 77, 72, 65, 1, 0, 0, 90 }"
- register "imc_zone0_fanspeeds" = "{100, 7, 5, 4, 3, 2, 0, 0 }"
- register "imc_zone1_thresholds" = "{ 85, 80, 75, 65, 1, 0, 0, 0, 90 }"
- register "imc_zone1_fanspeeds" = "{100, 10, 6, 4, 3, 0, 0, 0 }"
-
end #southbridge/amd/cimx/sb800
# end # device pci 18.0
# These seem unnecessary
diff --git a/src/mainboard/lippert/toucan-af/dsdt.asl b/src/mainboard/lippert/toucan-af/dsdt.asl
index 582ab7fa64..cde41b41bb 100644
--- a/src/mainboard/lippert/toucan-af/dsdt.asl
+++ b/src/mainboard/lippert/toucan-af/dsdt.asl
@@ -1462,6 +1462,7 @@ DefinitionBlock (
}
} /* End Device(_SB.PCI0.LpcIsaBr.COPR) */
#endif
+ #include "acpi/superio.asl"
} /* end LIBR */
Device(HPBR) {
@@ -1477,6 +1478,7 @@ DefinitionBlock (
} /* end Ac97modem */
Name(CRES, ResourceTemplate() {
+ IO(Decode16, 0x004E, 0x004E, 1, 2) /* SIO config regs */
IO(Decode16, 0x0CF8, 0x0CF8, 1, 8)
WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
diff --git a/src/mainboard/lippert/toucan-af/mainboard.c b/src/mainboard/lippert/toucan-af/mainboard.c
index 99e1c306a2..27952fa33d 100644
--- a/src/mainboard/lippert/toucan-af/mainboard.c
+++ b/src/mainboard/lippert/toucan-af/mainboard.c
@@ -17,6 +17,7 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
+#include <stdlib.h>
#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
@@ -29,6 +30,76 @@
#include <cpu/amd/agesa/s3_resume.h>
#include <cpu/amd/mtrr.h>
#include "SBPLATFORM.h"
+#include "OEM.h" /* SMBUS0_BASE_ADDRESS */
+
+/* Write data block to slave on SMBUS0. */
+#define SMB0_STATUS ((SMBUS0_BASE_ADDRESS) + 0)
+#define SMB0_CONTROL ((SMBUS0_BASE_ADDRESS) + 2)
+#define SMB0_HOSTCMD ((SMBUS0_BASE_ADDRESS) + 3)
+#define SMB0_ADDRESS ((SMBUS0_BASE_ADDRESS) + 4)
+#define SMB0_DATA0 ((SMBUS0_BASE_ADDRESS) + 5)
+#define SMB0_BLOCKDATA ((SMBUS0_BASE_ADDRESS) + 7)
+static int smb_write_blk(u8 slave, u8 command, u8 length, const u8 *data)
+{
+ __outbyte(SMB0_STATUS, 0x1E); // clear error status
+ __outbyte(SMB0_ADDRESS, slave & ~1); // slave addr + direction=out
+ __outbyte(SMB0_HOSTCMD, command); // or destination offset
+ __outbyte(SMB0_DATA0, length); // sent before data
+ __inbyte(SMB0_CONTROL); // reset block data array
+ while (length--)
+ __outbyte(SMB0_BLOCKDATA, *(data++));
+ __outbyte(SMB0_CONTROL, 0x54); // execute block write, no IRQ
+
+ while (__inbyte(SMB0_STATUS) == 0x01) ; // busy, no errors
+ return __inbyte(SMB0_STATUS) ^ 0x02; // 0x02 = completed, no errors
+}
+
+static void init(struct device *dev)
+{
+ int i;
+ printk(BIOS_DEBUG, CONFIG_MAINBOARD_PART_NUMBER " ENTER %s\n", __func__);
+
+ /* Init Hudson GPIOs. */
+ printk(BIOS_DEBUG, "Init FCH GPIOs @ 0x%08x\n", ACPI_MMIO_BASE+GPIO_BASE);
+ FCH_IOMUX( 50) = 2; // GPIO50: FCH_ARST#_GATE resets stuck PCIe devices
+ FCH_GPIO ( 50) = 0xC0; // = output set to 1 as it's never needed
+ FCH_IOMUX(197) = 2; // GPIO197: BIOS_DEFAULTS#
+ FCH_GPIO (197) = 0x28; // = input, disable int. pull-up
+ FCH_IOMUX( 56) = 1; // GPIO58-56: REV_ID2-0
+ FCH_GPIO ( 56) = 0x28; // = inputs, disable int. pull-ups
+ FCH_IOMUX( 57) = 1;
+ FCH_GPIO ( 57) = 0x28;
+ FCH_IOMUX( 58) = 1;
+ FCH_GPIO ( 58) = 0x28;
+ FCH_IOMUX(187) = 2; // GPIO187,188,166,GPO160: GPO0-3 on COM Express connector
+ FCH_GPIO (187) = 0x08; // = outputs, disable PUs, default to 0
+ FCH_IOMUX(188) = 2;
+ FCH_GPIO (188) = 0x08;
+ FCH_IOMUX(166) = 2;
+ FCH_GPIO (166) = 0x08;
+ // needed to make GPO160 work (Hudson Register Reference section 2.3.6.1)
+ FCH_PMIO(0xDC) &= ~0x80; FCH_PMIO(0xE6) = (FCH_PMIO(0xE6) & ~0x02) | 0x01;
+ FCH_IOMUX(160) = 1;
+ FCH_GPIO (160) = 0x08;
+ FCH_IOMUX(189) = 1; // GPIO189-192: GPI0-3 on COM Express connector
+ FCH_IOMUX(190) = 1; // default to inputs with int. PU
+ FCH_IOMUX(191) = 1;
+ FCH_IOMUX(192) = 1;
+ if (!fch_gpio_state(197)) // just in case anyone cares
+ printk(BIOS_INFO, "BIOS_DEFAULTS jumper is present.\n");
+ printk(BIOS_INFO, "Board revision ID: %u\n",
+ fch_gpio_state(58)<<2 | fch_gpio_state(57)<<1 | fch_gpio_state(56));
+
+ /* Notify the SMC we're alive and kicking, or after a while it will
+ * effect a power cycle and switch to the alternate BIOS chip.
+ * Should be done as late as possible. */
+ printk(BIOS_INFO, "Sending BIOS alive message\n");
+ const u8 i_am_alive[] = { 0x03 }; //bit2=SEL_DP0: 0=DDI2, 1=LVDS
+ if ((i = smb_write_blk(0x50, 0x25, sizeof(i_am_alive), i_am_alive)))
+ printk(BIOS_ERR, "smb_write_blk failed: %d\n", i);
+
+ printk(BIOS_DEBUG, CONFIG_MAINBOARD_PART_NUMBER " EXIT %s\n", __func__);
+}
void set_pcie_reset(void);
void set_pcie_dereset(void);
@@ -56,6 +127,7 @@ void set_pcie_dereset(void)
static void mainboard_enable(device_t dev)
{
printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n");
+ dev->ops->init = init;
/*
* The mainboard is the first place that we get control in ramstage. Check
diff --git a/src/mainboard/lippert/toucan-af/platform_cfg.h b/src/mainboard/lippert/toucan-af/platform_cfg.h
index b0ac180420..3c09713ad4 100644
--- a/src/mainboard/lippert/toucan-af/platform_cfg.h
+++ b/src/mainboard/lippert/toucan-af/platform_cfg.h
@@ -77,7 +77,7 @@
* Usb Ehci3 Contoller (Bus 0 Dev 22 Func2) is define at BIT5
* Usb Ohci4 Contoller (Bus 0 Dev 20 Func5) is define at BIT6
*/
-#define USB_CONFIG 0x7F
+#define USB_CONFIG 0x0F
/**
* @def PCI_CLOCK_CTRL
@@ -90,7 +90,7 @@
* PCI SLOT 3 define at BIT3
* PCI SLOT 4 define at BIT4
*/
-#define PCI_CLOCK_CTRL 0x07
+#define PCI_CLOCK_CTRL 0x1E
/**
* @def SATA_CONTROLLER
@@ -180,7 +180,6 @@
* SDIN2 is define at BIT4 & BIT5
* SDIN3 is define at BIT6 & BIT7
*/
-//#define AZALIA_SDIN_PIN 0xAA
#define AZALIA_SDIN_PIN 0x2A
/**
@@ -225,29 +224,32 @@
* 0 - Enable
* 1 - Disable
*/
-#define GEC_CONFIG 0
+#define GEC_CONFIG 1
-static const CODECENTRY persimmon_codec_alc269[] =
+static const CODECENTRY sample_codec_alc886[] = /* Realtek ALC886/8 */
{
- /* NID, PinConfig */
- {0x12, 0x411111F0},
- {0x14, 0x99130110},
- {0x21, 0x0121401F},
- {0x17, 0x411111F0},
- {0x18, 0x01A19820},
- {0x19, 0x411111F0},
- {0x1A, 0x0181302F},
- {0x1B, 0x411111F0},
- {0x1D, 0x40069E05},
- {0x1E, 0x411111F0},
- {0x20, 0x0001FFFF},
+ /* NID, PinConfig (Verbs 71F..C) */
+ {0x11, 0x411111F0}, /* NPC */
+ {0x12, 0x411111F0}, /* DMIC */
+ {0x14, 0x01214110}, /* FRONT (Port-D) */
+ {0x15, 0x01011112}, /* SURR (Port-A) */
+ {0x16, 0x01016111}, /* CEN/LFE (Port-G) */
+ {0x17, 0x411111F0}, /* SIDESURR (Port-H) */
+ {0x18, 0x01A19930}, /* MIC1 (Port-B) */
+ {0x19, 0x411111F0}, /* MIC2 (Port-F) */
+ {0x1A, 0x0181313F}, /* LINE1 (Port-C) */
+ {0x1B, 0x411111F0}, /* LINE2 (Port-E) */
+ {0x1C, 0x411111F0}, /* CD-IN */
+ {0x1D, 0x40132601}, /* BEEP-IN */
+ {0x1E, 0x01441120}, /* S/PDIF-OUT */
+ {0x1F, 0x01C46140}, /* S/PDIF-IN */
{0xff, 0xffffffff} /* end of table */
};
static const CODECTBLLIST codec_tablelist[] =
{
- {0x010ec0269, (CODECENTRY*)&persimmon_codec_alc269[0]},
- {0x0FFFFFFFFUL, (CODECENTRY*)0x0FFFFFFFFUL}
+ {0x10ec0888, (CODECENTRY*)&sample_codec_alc886[0]},
+ {0xFFFFFFFF, (CODECENTRY*)0xFFFFFFFFL}
};
/**
diff --git a/src/mainboard/lippert/toucan-af/romstage.c b/src/mainboard/lippert/toucan-af/romstage.c
index 2ed4a77d25..7d1181383a 100644
--- a/src/mainboard/lippert/toucan-af/romstage.c
+++ b/src/mainboard/lippert/toucan-af/romstage.c
@@ -31,7 +31,7 @@
#include <console/loglevel.h>
#include "agesawrapper.h"
#include "cpu/x86/bist.h"
-#include "superio/fintek/f81865f/f81865f_early_serial.c"
+#include "superio/winbond/w83627dhg/w83627dhg.h"
#include "cpu/x86/lapic/boot_cpu.c"
#include "drivers/pc80/i8254.c"
#include "drivers/pc80/i8259.c"
@@ -45,7 +45,7 @@
void disable_cache_as_ram(void); /* cache_as_ram.inc */
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx);
-#define SERIAL_DEV PNP_DEV(0x4e, F81865F_SP1)
+#define SERIAL_DEV PNP_DEV(0x4e, W83627DHG_SP1)
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
@@ -70,7 +70,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
sb_Poweron_Init();
post_code(0x31);
- f81865f_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
+ w83627dhg_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
console_init();
}