summaryrefslogtreecommitdiff
path: root/src/mainboard
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard')
-rw-r--r--src/mainboard/amd/dbm690t/Config.lb2
-rw-r--r--src/mainboard/amd/pistachio/Config.lb2
-rw-r--r--src/mainboard/gigabyte/m57sli/Config.lb428
-rw-r--r--src/mainboard/gigabyte/m57sli/devicetree.cb57
-rw-r--r--src/mainboard/technexion/tim8690/Config.lb2
5 files changed, 234 insertions, 257 deletions
diff --git a/src/mainboard/amd/dbm690t/Config.lb b/src/mainboard/amd/dbm690t/Config.lb
index a40bf65b7d..8fffd80411 100644
--- a/src/mainboard/amd/dbm690t/Config.lb
+++ b/src/mainboard/amd/dbm690t/Config.lb
@@ -136,7 +136,7 @@ config chip.h
#Define gpp_configuration, A=0, B=1, C=2, D=3, E=4(default)
#Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7)
#Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3,
-# 1: the system allows a PCIE link to be established on Dev2 or Dev3.
+# 1: the system allows a PCIE link to be established on Dev2 or Dev3.
#Define gfx_dual_slot, 0: single slot, 1: dual slot
#Define gfx_lane_reversal, 0: disable lane reversal, 1: enable
#Define gfx_tmds, 0: didn't support TMDS, 1: support
diff --git a/src/mainboard/amd/pistachio/Config.lb b/src/mainboard/amd/pistachio/Config.lb
index 146ab50bf9..93925fa9af 100644
--- a/src/mainboard/amd/pistachio/Config.lb
+++ b/src/mainboard/amd/pistachio/Config.lb
@@ -136,7 +136,7 @@ config chip.h
#Define gpp_configuration, A=0, B=1, C=2, D=3, E=4(default)
#Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7)
#Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3,
-# 1: the system allows a PCIE link to be established on Dev2 or Dev3.
+# 1: the system allows a PCIE link to be established on Dev2 or Dev3.
#Define gfx_dual_slot, 0: single slot, 1: dual slot
#Define gfx_lane_reversal, 0: disable lane reversal, 1: enable
#Define gfx_tmds, 0: didn't support TMDS, 1: support
diff --git a/src/mainboard/gigabyte/m57sli/Config.lb b/src/mainboard/gigabyte/m57sli/Config.lb
index 50ecab2ab4..cabb1b29f9 100644
--- a/src/mainboard/gigabyte/m57sli/Config.lb
+++ b/src/mainboard/gigabyte/m57sli/Config.lb
@@ -1,29 +1,29 @@
-##
+##
## This file is part of the coreboot project.
-##
+##
## Copyright (C) 2007 AMD
## Written by Yinghai Lu <yinghailu@amd.com> for AMD.
-##
+##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
-##
+##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
-##
+##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
+##
## CONFIG_XIP_ROM_SIZE must be a power of 2.
default CONFIG_XIP_ROM_SIZE = 64 * 1024
include /config/failovercalculation.lb
-arch i386 end
+arch i386 end
##
## Build the objects we have code for in this directory.
@@ -36,28 +36,28 @@ object get_bus_conf.o
if CONFIG_GENERATE_MP_TABLE object mptable.o end
if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
- if CONFIG_USE_INIT
+ if CONFIG_USE_INIT
makerule ./cache_as_ram_auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
+ depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
+ action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
end
else
makerule ./cache_as_ram_auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
+ depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
+ action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
+ action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
+ action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
end
end
if CONFIG_USE_FAILOVER_IMAGE
else
if CONFIG_AP_CODE_IN_CAR
- makerule ./apc_auto.o
- depends "$(CONFIG_MAINBOARD)/apc_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/apc_auto.c -o $@"
- end
- ldscript /arch/i386/init/ldscript_apc.lb
+ makerule ./apc_auto.o
+ depends "$(CONFIG_MAINBOARD)/apc_auto.c option_table.h"
+ action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/apc_auto.c -o $@"
+ end
+ ldscript /arch/i386/init/ldscript_apc.lb
end
end
@@ -79,32 +79,32 @@ end
mainboardinit cpu/x86/32bit/entry32.inc
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
+ if CONFIG_USE_INIT
+ ldscript /cpu/x86/32bit/entry32.lds
+ end
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
+ if CONFIG_USE_INIT
+ ldscript /cpu/amd/car/cache_as_ram.lds
+ end
##
## Build our reset vector (This is where coreboot is entered)
##
if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
+ if CONFIG_USE_FAILOVER_IMAGE
+ mainboardinit cpu/x86/16bit/reset16.inc
+ ldscript /cpu/x86/16bit/reset16.lds
else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
+ mainboardinit cpu/x86/32bit/reset32.inc
+ ldscript /cpu/x86/32bit/reset32.lds
end
else
- if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
+ if CONFIG_USE_FALLBACK_IMAGE
+ mainboardinit cpu/x86/16bit/reset16.inc
+ ldscript /cpu/x86/16bit/reset16.lds
else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
+ mainboardinit cpu/x86/32bit/reset32.inc
+ ldscript /cpu/x86/32bit/reset32.lds
end
end
@@ -118,12 +118,12 @@ ldscript /southbridge/nvidia/mcp55/id.lds
## ROMSTRAP table for MCP55
##
if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
+ if CONFIG_USE_FAILOVER_IMAGE
mainboardinit southbridge/nvidia/mcp55/romstrap.inc
ldscript /southbridge/nvidia/mcp55/romstrap.lds
end
else
- if CONFIG_USE_FALLBACK_IMAGE
+ if CONFIG_USE_FALLBACK_IMAGE
mainboardinit southbridge/nvidia/mcp55/romstrap.inc
ldscript /southbridge/nvidia/mcp55/romstrap.lds
end
@@ -135,7 +135,7 @@ end
mainboardinit cpu/amd/car/cache_as_ram.inc
###
-### This is the early phase of coreboot startup
+### This is the early phase of coreboot startup
### Things are delicate and we test to see if we should
### failover to another image.
###
@@ -176,209 +176,187 @@ if CONFIG_GENERATE_ACPI_TABLES
end
##
-## Include the secondary Configuration files
+## Include the secondary Configuration files
##
config chip.h
chip northbridge/amd/amdk8/root_complex
- device apic_cluster 0 on
- chip cpu/amd/socket_AM2
- device apic 0 on end
- end
- end
- device pci_domain 0 on
- chip northbridge/amd/amdk8 #mc0
- device pci 18.0 on
- # devices on link 0, link 0 == LDT 0
- chip southbridge/nvidia/mcp55
- device pci 0.0 on end # HT
- device pci 1.0 on # LPC
- chip superio/ite/it8716f
- # Floppy and any LDN
- device pnp 2e.0 on
- # Watchdog from CLKIN, CLKIN = 24 MHz
- irq 0x23 = 0x11
+ device apic_cluster 0 on
+ chip cpu/amd/socket_AM2
+ device apic 0 on end
+ end
+end
+device pci_domain 0 on
+ chip northbridge/amd/amdk8 #mc0
+ device pci 18.0 on # devices on link 0, link 0 == LDT 0
+ chip southbridge/nvidia/mcp55
+ device pci 0.0 on end # HT
+ device pci 1.0 on # LPC
+ chip superio/ite/it8716f
+ # Floppy and any LDN
+ device pnp 2e.0 on
+ # Watchdog from CLKIN, CLKIN = 24 MHz
+ irq 0x23 = 0x11
# Serial Flash (SPI only)
- #0x24 = 0x1a
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.2 off # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.3 on # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.4 on # EC
- io 0x60 = 0x290
- io 0x62 = 0x230
- irq 0x70 = 9
- end
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- end
- device pnp 2e.6 on # Mouse
- irq 0x70 = 12
- end
- device pnp 2e.7 on # GPIO, SPI flash
- # pin 84 is not GP10
- irq 0x25 = 0x0
- # pin 21 is GP26, pin 26 is GP21, pin 27 is GP20
- irq 0x26 = 0x43
- # pin 13 is GP35
- irq 0x27 = 0x20
- # pin 70 is not GP46
- #irq 0x28 = 0x0
- # pin 6,3,128,127,126 is GP63,64,65,66,67
- irq 0x29 = 0x81
- # Enable FAN_CTL/FAN_TAC set to 5 (pin 21,23), enable FAN_CTL/FAN_TAC set to 4 (pin 20,22), pin 48 is PCIRST5#, pin91 is PCIRSTIN#, VIN7 is internal voltage divider for VCCH5V, pin 95 is ATXPG, VIN3 is internal voltage divider for VCC5V
- #irq 0x2c = 0x1f
- # Simple I/O base
- io 0x62 = 0x800
- # Serial Flash I/O (SPI only)
- io 0x64 = 0x820
- # watch dog force timeout (parallel flash only)
- #irq 0x71 = 0x1
- # No WDT interrupt
- irq 0x72 = 0x0
- # GPIO pin set 1 disable internal pullup
- irq 0xb8 = 0x0
- # GPIO pin set 5 enable internal pullup
- irq 0xbc = 0x01
- # SIO pin set 1 alternate function
- #irq 0xc0 = 0x0
- # SIO pin set 2 mixed function
- irq 0xc1 = 0x43
- # SIO pin set 3 mixed function
- irq 0xc2 = 0x20
- # SIO pin set 4 alternate function
- #irq 0xc3 = 0x0
- # SIO pin set 1 input mode
- #irq 0xc8 = 0x0
- # SIO pin set 2 input mode
- irq 0xc9 = 0x0
- # SIO pin set 4 input mode
- #irq 0xcb = 0x0
- # Generate SMI# on EC IRQ
- #irq 0xf0 = 0x10
- # SMI# level trigger
- #irq 0xf1 = 0x40
- # HWMON alert beep pin location
- irq 0xf6 = 0x28
- end
- device pnp 2e.8 off # MIDI
- io 0x60 = 0x300
- irq 0x70 = 10
- end
- device pnp 2e.9 off # GAME
- io 0x60 = 0x220
- end
- device pnp 2e.a off end # CIR
+ #0x24 = 0x1a
+ io 0x60 = 0x3f0
+ irq 0x70 = 6
+ drq 0x74 = 2
+ end
+ device pnp 2e.1 on # Com1
+ io 0x60 = 0x3f8
+ irq 0x70 = 4
+ end
+ device pnp 2e.2 off # Com2
+ io 0x60 = 0x2f8
+ irq 0x70 = 3
end
+ device pnp 2e.3 on # Parallel Port
+ io 0x60 = 0x378
+ irq 0x70 = 7
+ end
+ device pnp 2e.4 on # EC
+ io 0x60 = 0x290
+ io 0x62 = 0x230
+ irq 0x70 = 9
+ end
+ device pnp 2e.5 on # Keyboard
+ io 0x60 = 0x60
+ io 0x62 = 0x64
+ irq 0x70 = 1
+ end
+ device pnp 2e.6 on # Mouse
+ irq 0x70 = 12
+ end
+ device pnp 2e.7 on # GPIO, SPI flash
+ # pin 84 is not GP10
+ irq 0x25 = 0x0
+ # pin 21 is GP26, pin 26 is GP21, pin 27 is GP20
+ irq 0x26 = 0x43
+ # pin 13 is GP35
+ irq 0x27 = 0x20
+ # pin 70 is not GP46
+ #irq 0x28 = 0x0
+ # pin 6,3,128,127,126 is GP63,64,65,66,67
+ irq 0x29 = 0x81
+ # Enable FAN_CTL/FAN_TAC set to 5 (pin 21,23), enable FAN_CTL/FAN_TAC set to 4 (pin 20,22), pin 48 is PCIRST5#, pin91 is PCIRSTIN#, VIN7 is internal voltage divider for VCCH5V, pin 95 is ATXPG, VIN3 is internal voltage divider for VCC5V
+ #irq 0x2c = 0x1f
+ # Simple I/O base
+ io 0x62 = 0x800
+ # Serial Flash I/O (SPI only)
+ io 0x64 = 0x820
+ # watch dog force timeout (parallel flash only)
+ #irq 0x71 = 0x1
+ # No WDT interrupt
+ irq 0x72 = 0x0
+ # GPIO pin set 1 disable internal pullup
+ irq 0xb8 = 0x0
+ # GPIO pin set 5 enable internal pullup
+ irq 0xbc = 0x01
+ # SIO pin set 1 alternate function
+ #irq 0xc0 = 0x0
+ # SIO pin set 2 mixed function
+ irq 0xc1 = 0x43
+ # SIO pin set 3 mixed function
+ irq 0xc2 = 0x20
+ # SIO pin set 4 alternate function
+ #irq 0xc3 = 0x0
+ # SIO pin set 1 input mode
+ #irq 0xc8 = 0x0
+ # SIO pin set 2 input mode
+ irq 0xc9 = 0x0
+ # SIO pin set 4 input mode
+ #irq 0xcb = 0x0
+ # Generate SMI# on EC IRQ
+ #irq 0xf0 = 0x10
+ # SMI# level trigger
+ #irq 0xf1 = 0x40
+ # HWMON alert beep pin location
+ irq 0xf6 = 0x28
+ end
+ device pnp 2e.8 off # MIDI
+ io 0x60 = 0x300
+ irq 0x70 = 10
+ end
+ device pnp 2e.9 off # GAME
+ io 0x60 = 0x220
+ end
+ device pnp 2e.a off end # CIR
+ end
+ end
+ device pci 1.1 on # SM 0
+ chip drivers/generic/generic #dimm 0-0-0
+ device i2c 50 on end
+ end
+ chip drivers/generic/generic #dimm 0-0-1
+ device i2c 51 on end
end
- device pci 1.1 on # SM 0
- chip drivers/generic/generic #dimm 0-0-0
- device i2c 50 on end
- end
- chip drivers/generic/generic #dimm 0-0-1
- device i2c 51 on end
- end
- chip drivers/generic/generic #dimm 0-1-0
- device i2c 52 on end
- end
- chip drivers/generic/generic #dimm 0-1-1
- device i2c 53 on end
- end
- chip drivers/generic/generic #dimm 1-0-0
- device i2c 54 on end
- end
- chip drivers/generic/generic #dimm 1-0-1
- device i2c 55 on end
- end
- chip drivers/generic/generic #dimm 1-1-0
- device i2c 56 on end
- end
- chip drivers/generic/generic #dimm 1-1-1
- device i2c 57 on end
- end
- end # SM
+ chip drivers/generic/generic #dimm 0-1-0
+ device i2c 52 on end
+ end
+ chip drivers/generic/generic #dimm 0-1-1
+ device i2c 53 on end
+ end
+ chip drivers/generic/generic #dimm 1-0-0
+ device i2c 54 on end
+ end
+ chip drivers/generic/generic #dimm 1-0-1
+ device i2c 55 on end
+ end
+ chip drivers/generic/generic #dimm 1-1-0
+ device i2c 56 on end
+ end
+ chip drivers/generic/generic #dimm 1-1-1
+ device i2c 57 on end
+ end
+ end # SM
#WTF?!? We already have device pci 1.1 in the section above
- device pci 1.1 on # SM 1
-#PCI device smbus address will depend on addon pci device, do we need to scan_smbus_bus?
-# chip drivers/generic/generic #PCIXA Slot1
-# device i2c 50 on end
-# end
-# chip drivers/generic/generic #PCIXB Slot1
-# device i2c 51 on end
-# end
-# chip drivers/generic/generic #PCIXB Slot2
-# device i2c 52 on end
-# end
-# chip drivers/generic/generic #PCI Slot1
-# device i2c 53 on end
-# end
-# chip drivers/generic/generic #Master MCP55 PCI-E
-# device i2c 54 on end
-# end
-# chip drivers/generic/generic #Slave MCP55 PCI-E
-# device i2c 55 on end
-# end
- chip drivers/generic/generic #MAC EEPROM
- device i2c 51 on end
- end
-
- end # SM
- device pci 2.0 on end # USB 1.1
- device pci 2.1 on end # USB 2
- device pci 4.0 on end # IDE
- device pci 5.0 on end # SATA 0
- device pci 5.1 on end # SATA 1
- device pci 5.2 on end # SATA 2
- device pci 6.0 on end # PCI
- device pci 6.1 on end # AZA
- device pci 8.0 on end # NIC
- device pci 9.0 off end # NIC
- device pci a.0 on end # PCI E 5
- device pci b.0 on end # PCI E 4
- device pci c.0 on end # PCI E 3
- device pci d.0 on end # PCI E 2
- device pci e.0 on end # PCI E 1
- device pci f.0 on end # PCI E 0
- register "ide0_enable" = "1"
- register "sata0_enable" = "1"
- register "sata1_enable" = "1"
+ device pci 1.1 on # SM 1
+ chip drivers/generic/generic #MAC EEPROM
+ device i2c 51 on end
+ end
+ end # SM
+ device pci 2.0 on end # USB 1.1
+ device pci 2.1 on end # USB 2
+ device pci 4.0 on end # IDE
+ device pci 5.0 on end # SATA 0
+ device pci 5.1 on end # SATA 1
+ device pci 5.2 on end # SATA 2
+ device pci 6.0 on end # PCI
+ device pci 6.1 on end # AZA
+ device pci 8.0 on end # NIC
+ device pci 9.0 off end # NIC
+ device pci a.0 on end # PCI E 5
+ device pci b.0 on end # PCI E 4
+ device pci c.0 on end # PCI E 3
+ device pci d.0 on end # PCI E 2
+ device pci e.0 on end # PCI E 1
+ device pci f.0 on end # PCI E 0
+ register "ide0_enable" = "1"
+ register "sata0_enable" = "1"
+ register "sata1_enable" = "1"
register "mac_eeprom_smbus" = "3" # 1: smbus under 2e.8, 2: SM0 3: SM1
register "mac_eeprom_addr" = "0x51"
end
- end # device pci 18.0
+ end #device pci 18.0
device pci 18.0 on end # Link 1
device pci 18.0 on end
device pci 18.1 on end
device pci 18.2 on end
device pci 18.3 on end
end # mc0
-
end # PCI domain
-
-# chip drivers/generic/debug
-# device pnp 0.0 off end # chip name
-# device pnp 0.1 on end # pci_regs_all
-# device pnp 0.2 on end # mem
-# device pnp 0.3 off end # cpuid
-# device pnp 0.4 on end # smbus_regs_all
-# device pnp 0.5 off end # dual core msr
-# device pnp 0.6 off end # cache size
-# device pnp 0.7 off end # tsc
-# device pnp 0.8 off end # io
-# device pnp 0.9 off end # io
-# end
+
+# chip drivers/generic/debug
+# device pnp 0.0 off end # chip name
+# device pnp 0.1 on end # pci_regs_all
+# device pnp 0.2 on end # mem
+# device pnp 0.3 off end # cpuid
+# device pnp 0.4 on end # smbus_regs_all
+# device pnp 0.5 off end # dual core msr
+# device pnp 0.6 off end # cache size
+# device pnp 0.7 off end # tsc
+# device pnp 0.8 off end # io
+# device pnp 0.9 off end # io
+# end
end #root_complex
diff --git a/src/mainboard/gigabyte/m57sli/devicetree.cb b/src/mainboard/gigabyte/m57sli/devicetree.cb
index 0c5dd3b09f..b403ef890a 100644
--- a/src/mainboard/gigabyte/m57sli/devicetree.cb
+++ b/src/mainboard/gigabyte/m57sli/devicetree.cb
@@ -5,11 +5,11 @@ chip northbridge/amd/amdk8/root_complex
end
end
device pci_domain 0 on
- chip northbridge/amd/amdk8
- device pci 18.0 on
- chip southbridge/nvidia/mcp55
- device pci 0.0 on end
- device pci 1.0 on
+ chip northbridge/amd/amdk8 #mc0
+ device pci 18.0 on # devices on link 0, link 0 == LDT 0
+ chip southbridge/nvidia/mcp55
+ device pci 0.0 on end # HT
+ device pci 1.0 on # LPC
chip superio/ite/it8716f
# Floppy and any LDN
device pnp 2e.0 on
@@ -52,7 +52,7 @@ device pci_domain 0 on
# pin 21 is GP26, pin 26 is GP21, pin 27 is GP20
irq 0x26 = 0x43
# pin 13 is GP35
- irq 0x27 = 0x20
+ irq 0x27 = 0x20
# pin 70 is not GP46
#irq 0x28 = 0x0
# pin 6,3,128,127,126 is GP63,64,65,66,67
@@ -66,7 +66,7 @@ device pci_domain 0 on
# watch dog force timeout (parallel flash only)
#irq 0x71 = 0x1
# No WDT interrupt
- irq 0x72 = 0x0
+ irq 0x72 = 0x0
# GPIO pin set 1 disable internal pullup
irq 0xb8 = 0x0
# GPIO pin set 5 enable internal pullup
@@ -99,11 +99,10 @@ device pci_domain 0 on
device pnp 2e.9 off # GAME
io 0x60 = 0x220
end
- device pnp 2e.a off # CIR
- end
+ device pnp 2e.a off end # CIR
end
end
- device pci 1.1 on
+ device pci 1.1 on # SM 0
chip drivers/generic/generic #dimm 0-0-0
device i2c 50 on end
end
@@ -129,22 +128,22 @@ device pci_domain 0 on
device i2c 57 on end
end
end # SM
- device pci 2.0 on end # USB 1.1
- device pci 2.1 on end # USB 2
- device pci 4.0 on end # IDE
- device pci 5.0 on end # SATA 0
- device pci 5.1 on end # SATA 1
- device pci 5.2 on end # SATA 2
- device pci 6.0 on end # PCI
- device pci 6.1 on end # AUDIO
- device pci 8.0 on end # NIC
- device pci 9.0 off end # N/A
- device pci a.0 on end # PCI E 5
- device pci b.0 on end # PCI E 4
- device pci c.0 on end # PCI E 3
- device pci d.0 on end # PCI E 2
- device pci e.0 on end # PCI E 1
- device pci f.0 on end # PCI E 0
+ device pci 2.0 on end # USB 1.1
+ device pci 2.1 on end # USB 2
+ device pci 4.0 on end # IDE
+ device pci 5.0 on end # SATA 0
+ device pci 5.1 on end # SATA 1
+ device pci 5.2 on end # SATA 2
+ device pci 6.0 on end # PCI
+ device pci 6.1 on end # AUDIO
+ device pci 8.0 on end # NIC
+ device pci 9.0 off end # N/A
+ device pci a.0 on end # PCI E 5
+ device pci b.0 on end # PCI E 4
+ device pci c.0 on end # PCI E 3
+ device pci d.0 on end # PCI E 2
+ device pci e.0 on end # PCI E 1
+ device pci f.0 on end # PCI E 0
register "ide0_enable" = "1"
register "sata0_enable" = "1"
register "sata1_enable" = "1"
@@ -153,13 +152,14 @@ device pci_domain 0 on
end
end #device pci 18.0
device pci 18.0 on end # Link 1
+ device pci 18.0 on end
device pci 18.1 on end
device pci 18.2 on end
device pci 18.3 on end
end # mc0
end # PCI domain
-# chip drivers/generic/debug
+# chip drivers/generic/debug
# device pnp 0.0 off end # chip name
# device pnp 0.1 on end # pci_regs_all
# device pnp 0.2 on end # mem
@@ -170,6 +170,5 @@ device pci_domain 0 on
# device pnp 0.7 off end # tsc
# device pnp 0.8 off end # io
# device pnp 0.9 off end # io
-# end
-
+# end
end #root_complex
diff --git a/src/mainboard/technexion/tim8690/Config.lb b/src/mainboard/technexion/tim8690/Config.lb
index a40bf65b7d..8fffd80411 100644
--- a/src/mainboard/technexion/tim8690/Config.lb
+++ b/src/mainboard/technexion/tim8690/Config.lb
@@ -136,7 +136,7 @@ config chip.h
#Define gpp_configuration, A=0, B=1, C=2, D=3, E=4(default)
#Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7)
#Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3,
-# 1: the system allows a PCIE link to be established on Dev2 or Dev3.
+# 1: the system allows a PCIE link to be established on Dev2 or Dev3.
#Define gfx_dual_slot, 0: single slot, 1: dual slot
#Define gfx_lane_reversal, 0: disable lane reversal, 1: enable
#Define gfx_tmds, 0: didn't support TMDS, 1: support
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 02:44:20 +0000