summaryrefslogtreecommitdiff
path: root/src/mainboard/via
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard/via')
-rw-r--r--src/mainboard/via/epia-m/Config.lb14
-rw-r--r--src/mainboard/via/epia-m/Options.lb8
-rw-r--r--src/mainboard/via/epia-m/acpi_tables.c2
-rw-r--r--src/mainboard/via/epia-m/mainboard.c2
-rw-r--r--src/mainboard/via/epia-m/vgabios.c6
-rw-r--r--src/mainboard/via/epia/Config.lb14
-rw-r--r--src/mainboard/via/epia/Options.lb8
7 files changed, 27 insertions, 27 deletions
diff --git a/src/mainboard/via/epia-m/Config.lb b/src/mainboard/via/epia-m/Config.lb
index a3e4b41486..c8537e0425 100644
--- a/src/mainboard/via/epia-m/Config.lb
+++ b/src/mainboard/via/epia-m/Config.lb
@@ -1,6 +1,6 @@
##
## Compute the location and size of where this firmware image
-## (linuxBIOS plus bootloader) will live in the boot rom chip.
+## (coreboot plus bootloader) will live in the boot rom chip.
##
if USE_FALLBACK_IMAGE
default ROM_SECTION_SIZE = FALLBACK_SIZE
@@ -12,18 +12,18 @@ end
##
## Compute the start location and size size of
-## The linuxBIOS bootloader.
+## The coreboot bootloader.
##
default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
##
-## Compute where this copy of linuxBIOS will start in the boot rom
+## Compute where this copy of coreboot will start in the boot rom
##
default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE )
##
-## Compute a range of ROM that can cached to speed up linuxBIOS,
+## Compute a range of ROM that can cached to speed up coreboot,
## execution speed.
##
## XIP_ROM_SIZE must be a power of 2.
@@ -76,7 +76,7 @@ makerule ./auto.inc
end
##
-## Build our 16 bit and 32 bit linuxBIOS entry code
+## Build our 16 bit and 32 bit coreboot entry code
##
mainboardinit cpu/x86/16bit/entry16.inc
mainboardinit cpu/x86/32bit/entry32.inc
@@ -84,7 +84,7 @@ ldscript /cpu/x86/16bit/entry16.lds
ldscript /cpu/x86/32bit/entry32.lds
##
-## Build our reset vector (This is where linuxBIOS is entered)
+## Build our reset vector (This is where coreboot is entered)
##
if USE_FALLBACK_IMAGE
mainboardinit cpu/x86/16bit/reset16.inc
@@ -104,7 +104,7 @@ mainboardinit arch/i386/lib/id.inc
ldscript /arch/i386/lib/id.lds
###
-### This is the early phase of linuxBIOS startup
+### This is the early phase of coreboot startup
### Things are delicate and we test to see if we should
### failover to another image.
###
diff --git a/src/mainboard/via/epia-m/Options.lb b/src/mainboard/via/epia-m/Options.lb
index 5c88e5f817..575cc5eeb3 100644
--- a/src/mainboard/via/epia-m/Options.lb
+++ b/src/mainboard/via/epia-m/Options.lb
@@ -10,7 +10,7 @@ uses IRQ_SLOT_COUNT
uses MAINBOARD
uses MAINBOARD_VENDOR
uses MAINBOARD_PART_NUMBER
-uses LINUXBIOS_EXTRA_VERSION
+uses COREBOOT_EXTRA_VERSION
uses ARCH
uses FALLBACK_SIZE
uses STACK_SIZE
@@ -71,7 +71,7 @@ default CONFIG_UDELAY_TSC=1
default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1
##
-## Build code to reset the motherboard from linuxBIOS
+## Build code to reset the motherboard from coreboot
##
default HAVE_HARD_RESET=0
@@ -94,10 +94,10 @@ default HAVE_ACPI_TABLES=1
default HAVE_OPTION_TABLE=1
###
-### LinuxBIOS layout values
+### coreboot layout values
###
-## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
+## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
default ROM_IMAGE_SIZE = 65536
default FALLBACK_SIZE = 131072
diff --git a/src/mainboard/via/epia-m/acpi_tables.c b/src/mainboard/via/epia-m/acpi_tables.c
index 209434415b..fbe859d3d2 100644
--- a/src/mainboard/via/epia-m/acpi_tables.c
+++ b/src/mainboard/via/epia-m/acpi_tables.c
@@ -1,5 +1,5 @@
/*
- * LinuxBIOS ACPI Table support
+ * coreboot ACPI Table support
* written by Stefan Reinauer <stepan@openbios.org>
* ACPI FADT, FACS, and DSDT table support added by
* Nick Barker <nick.barker9@btinternet.com>, and those portions
diff --git a/src/mainboard/via/epia-m/mainboard.c b/src/mainboard/via/epia-m/mainboard.c
index d48330ff4b..8f2ee10f02 100644
--- a/src/mainboard/via/epia-m/mainboard.c
+++ b/src/mainboard/via/epia-m/mainboard.c
@@ -13,7 +13,7 @@ static void vga_fixup(void) {
// we do this right here because:
// - all the hardware is working, and some VGA bioses seem to need
// that
- // - we need page 0 below for linuxbios tables.
+ // - we need page 0 below for coreboot tables.
printk_debug("INSTALL REAL-MODE IDT\n");
setup_realmode_idt();
diff --git a/src/mainboard/via/epia-m/vgabios.c b/src/mainboard/via/epia-m/vgabios.c
index 8565ba2236..6d588a7021 100644
--- a/src/mainboard/via/epia-m/vgabios.c
+++ b/src/mainboard/via/epia-m/vgabios.c
@@ -66,7 +66,7 @@
*--------------------------------------------------------------------*/
/* Modified to be a self sufficient plug in so that it can be used
- without reliance on other parts of core Linuxbios
+ without reliance on other parts of core coreboot
(C) 2005 Nick.Barker9@btinternet.com
Used initially for epia-m where there are problems getting the bios
@@ -399,10 +399,10 @@ struct realidt {
// that simplifies a lot of things ...
// we'll just push all the registers on the stack as longwords,
// and pop to protected mode.
-// second, since this only ever runs as part of linuxbios,
+// second, since this only ever runs as part of coreboot,
// we know all the segment register values -- so we don't save any.
// keep the handler that calls things small. It can do a call to
-// more complex code in linuxbios itself. This helps a lot as we don't
+// more complex code in coreboot itself. This helps a lot as we don't
// have to do address fixup in this little stub, and calls are absolute
// so the handler is relocatable.
void handler(void)
diff --git a/src/mainboard/via/epia/Config.lb b/src/mainboard/via/epia/Config.lb
index 4dc9511990..9c354f7350 100644
--- a/src/mainboard/via/epia/Config.lb
+++ b/src/mainboard/via/epia/Config.lb
@@ -1,6 +1,6 @@
##
## Compute the location and size of where this firmware image
-## (linuxBIOS plus bootloader) will live in the boot rom chip.
+## (coreboot plus bootloader) will live in the boot rom chip.
##
if USE_FALLBACK_IMAGE
default ROM_SECTION_SIZE = FALLBACK_SIZE
@@ -12,18 +12,18 @@ end
##
## Compute the start location and size size of
-## The linuxBIOS bootloader.
+## The coreboot bootloader.
##
default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
##
-## Compute where this copy of linuxBIOS will start in the boot rom
+## Compute where this copy of coreboot will start in the boot rom
##
default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE )
##
-## Compute a range of ROM that can cached to speed up linuxBIOS,
+## Compute a range of ROM that can cached to speed up coreboot,
## execution speed.
##
## XIP_ROM_SIZE must be a power of 2.
@@ -69,7 +69,7 @@ makerule ./auto.inc
end
##
-## Build our 16 bit and 32 bit linuxBIOS entry code
+## Build our 16 bit and 32 bit coreboot entry code
##
mainboardinit cpu/x86/16bit/entry16.inc
mainboardinit cpu/x86/32bit/entry32.inc
@@ -77,7 +77,7 @@ ldscript /cpu/x86/16bit/entry16.lds
ldscript /cpu/x86/32bit/entry32.lds
##
-## Build our reset vector (This is where linuxBIOS is entered)
+## Build our reset vector (This is where coreboot is entered)
##
if USE_FALLBACK_IMAGE
mainboardinit cpu/x86/16bit/reset16.inc
@@ -97,7 +97,7 @@ mainboardinit arch/i386/lib/id.inc
ldscript /arch/i386/lib/id.lds
###
-### This is the early phase of linuxBIOS startup
+### This is the early phase of coreboot startup
### Things are delicate and we test to see if we should
### failover to another image.
###
diff --git a/src/mainboard/via/epia/Options.lb b/src/mainboard/via/epia/Options.lb
index 218f20d86a..d58be818b1 100644
--- a/src/mainboard/via/epia/Options.lb
+++ b/src/mainboard/via/epia/Options.lb
@@ -20,7 +20,7 @@ uses IRQ_SLOT_COUNT
uses MAINBOARD
uses MAINBOARD_VENDOR
uses MAINBOARD_PART_NUMBER
-uses LINUXBIOS_EXTRA_VERSION
+uses COREBOOT_EXTRA_VERSION
uses ARCH
uses FALLBACK_SIZE
uses STACK_SIZE
@@ -82,7 +82,7 @@ default HAVE_FALLBACK_BOOT=1
default HAVE_MP_TABLE=0
##
-## Build code to reset the motherboard from linuxBIOS
+## Build code to reset the motherboard from coreboot
##
default HAVE_HARD_RESET=0
@@ -107,10 +107,10 @@ default IRQ_SLOT_COUNT=5
default HAVE_OPTION_TABLE=1
###
-### LinuxBIOS layout values
+### coreboot layout values
###
-## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
+## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
default ROM_IMAGE_SIZE = 65536
default FALLBACK_SIZE = 131072