diff options
Diffstat (limited to 'src/mainboard/via')
| -rw-r--r-- | src/mainboard/via/Kconfig | 37 | ||||
| -rw-r--r-- | src/mainboard/via/epia-cn/devicetree.cb | 61 | ||||
| -rw-r--r-- | src/mainboard/via/epia-m/devicetree.cb | 57 | ||||
| -rw-r--r-- | src/mainboard/via/epia-m700/devicetree.cb | 24 | ||||
| -rw-r--r-- | src/mainboard/via/epia/devicetree.cb | 65 | ||||
| -rw-r--r-- | src/mainboard/via/pc2500e/devicetree.cb | 88 | ||||
| -rw-r--r-- | src/mainboard/via/vt8454c/Makefile.inc | 64 | ||||
| -rw-r--r-- | src/mainboard/via/vt8454c/devicetree.cb | 59 |
8 files changed, 455 insertions, 0 deletions
diff --git a/src/mainboard/via/Kconfig b/src/mainboard/via/Kconfig new file mode 100644 index 0000000000..ba0f11b082 --- /dev/null +++ b/src/mainboard/via/Kconfig @@ -0,0 +1,37 @@ +choice + prompt "Mainboard model" + depends on VENDOR_VIA + +config BOARD_VIA_VT8454C + bool "vt8454c" + select ARCH_X86 + select CPU_VIA_C7 + select NORTHBRIDGE_VIA_CX700 +# select SOUTHBRIDGE_INTEL_I82801GX + select SUPERIO_VIA_VT1211 + select PIRQ_TABLE +# select MMCONF_SUPPORT + select USE_PRINTK_IN_CAR + help + Kontron 986LCD-M Series mainboards +endchoice + +config MAINBOARD_DIR + string + default via/vt8454c + depends on BOARD_VIA_VT8454C + +config DCACHE_RAM_BASE + hex + default 0xffef0000 + depends on BOARD_VIA_VT8454C + +config DCACHE_RAM_SIZE + hex + default 0x8000 + depends on BOARD_VIA_VT8454C + +config MAINBOARD_PART_NUMBER + string + default "VT8454C" + depends on BOARD_VIA_VT8454C diff --git a/src/mainboard/via/epia-cn/devicetree.cb b/src/mainboard/via/epia-cn/devicetree.cb new file mode 100644 index 0000000000..64252394b2 --- /dev/null +++ b/src/mainboard/via/epia-cn/devicetree.cb @@ -0,0 +1,61 @@ +chip northbridge/via/cn700 # Northbridge + device pci_domain 0 on # PCI domain + device pci 0.0 on end # AGP Bridge + device pci 0.1 on end # Error Reporting + device pci 0.2 on end # Host Bus Control + device pci 0.3 on end # Memory Controller + device pci 0.4 on end # Power Management + device pci 0.7 on end # V-Link Controller + device pci 1.0 on end # PCI Bridge + chip southbridge/via/vt8237r # Southbridge + # Enable both IDE channels. + register "ide0_enable" = "1" + register "ide1_enable" = "1" + # Both cables are 40pin. + register "ide0_80pin_cable" = "0" + register "ide1_80pin_cable" = "0" + device pci f.0 on end # IDE + register "fn_ctrl_lo" = "0x80" + register "fn_ctrl_hi" = "0x1d" + device pci 10.0 on end # OHCI + device pci 10.1 on end # OHCI + device pci 10.2 on end # OHCI + device pci 10.3 on end # OHCI + device pci 10.4 on end # EHCI + device pci 10.5 on end # UDCI + device pci 11.0 on # Southbridge LPC + chip superio/via/vt1211 # Super I/O + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 3 + end + device pnp 2e.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.b on # HWM + io 0x60 = 0xec00 + end + end + end + device pci 11.5 on end # AC'97 audio + # device pci 11.6 off end # AC'97 Modem + device pci 12.0 on end # Ethernet + end + end + device apic_cluster 0 on # APIC cluster + chip cpu/via/model_c7 # VIA C7 + device apic 0 on end # APIC + end + end +end diff --git a/src/mainboard/via/epia-m/devicetree.cb b/src/mainboard/via/epia-m/devicetree.cb new file mode 100644 index 0000000000..2b9abec3da --- /dev/null +++ b/src/mainboard/via/epia-m/devicetree.cb @@ -0,0 +1,57 @@ +chip northbridge/via/vt8623 + + device apic_cluster 0 on + chip cpu/via/model_c3 + device apic 0 on end + end + end + + device pci_domain 0 on + chip southbridge/via/vt8235 + + device pci 10.0 on end # USB 1.1 + device pci 10.1 on end # USB 1.1 + device pci 10.2 on end # USB 1.1 + device pci 10.3 on end # USB 2 + + device pci 11.0 on # Southbridge + chip superio/via/vt1211 + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 3 + end + device pnp 2e.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.b on # HWM + io 0x60 = 0xec00 + end + + end + end + + device pci 11.1 on end # IDE + # 2-4 non existant? + device pci 11.5 on end # AC97 Audio + device pci 11.6 off end # AC97 Modem + device pci 12.0 on end # Ethernet + end +# This is on the EPIA MII, not the M. + chip southbridge/ricoh/rl5c476 + register "enable_cf" = "1" + device pci 0a.0 on end + device pci 0a.1 on end + end + end +end diff --git a/src/mainboard/via/epia-m700/devicetree.cb b/src/mainboard/via/epia-m700/devicetree.cb new file mode 100644 index 0000000000..008399a94f --- /dev/null +++ b/src/mainboard/via/epia-m700/devicetree.cb @@ -0,0 +1,24 @@ +chip northbridge/via/vx800 # Northbridge + device pci_domain 0 on + device pci 0.0 on end # AGP Bridge + device pci 0.1 on end # Error Reporting + device pci 0.2 on end # Host Bus Control + device pci 0.3 on end # Memory Controller + device pci 0.4 on end # Power Management + device pci 0.7 on end # V-Link Controller + device pci 1.0 on end # PCI Bridge + # device pci f.0 on end # IDE/SATA + # device pci f.1 on end # IDE + # device pci 10.0 on end # USB 1.1 + # device pci 10.1 on end # USB 1.1 + # device pci 10.2 on end # USB 1.1 + # device pci 10.4 on end # USB 2.0 + # device pci 11.0 on # Southbridge LPC + # end + end + device apic_cluster 0 on # APIC cluster + chip cpu/via/model_c7 # VIA C7 + device apic 0 on end # APIC + end + end +end diff --git a/src/mainboard/via/epia/devicetree.cb b/src/mainboard/via/epia/devicetree.cb new file mode 100644 index 0000000000..b75ee5881a --- /dev/null +++ b/src/mainboard/via/epia/devicetree.cb @@ -0,0 +1,65 @@ +chip northbridge/via/vt8601 + device pci_domain 0 on + device pci 0.0 on end # Northbridge +# device pci 0.1 on # AGP bridge + # chip drivers/pci/onboard # Integrated VGA + # device pci 0.0 on end + # register "rom_adress" = "0xfff80000" + # end +# end + chip southbridge/via/vt8231 + register "enable_native_ide" = "0" + register "enable_com_ports" = "1" + register "enable_keyboard" = "0" + device pci 11.0 on # Southbrdge + chip superio/winbond/w83627hf + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + register "com1" = "{CONFIG_TTYS0_BAUD}" + end + device pnp 2e.6 off end # CIR + device pnp 2e.7 off end # GAME_MIDI_GIPO1 + device pnp 2e.8 off end # GPIO2 + device pnp 2e.9 off end # GPIO3 + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 + end + end + device pci 11.1 on end # Ide + device pci 11.2 off end # Usb port 0-1 + device pci 11.3 off end # Usb port 2-3 + device pci 11.4 off end # ACPI + device pci 11.5 off end # AC97 Audio + device pci 11.6 on end # AC97 Modem + device pci 12.0 on end # Ethernet + end + end + + device apic_cluster 0 on + chip cpu/via/model_c3 + device apic 0 on end + end + end +end diff --git a/src/mainboard/via/pc2500e/devicetree.cb b/src/mainboard/via/pc2500e/devicetree.cb new file mode 100644 index 0000000000..c03d00072a --- /dev/null +++ b/src/mainboard/via/pc2500e/devicetree.cb @@ -0,0 +1,88 @@ +chip northbridge/via/cn700 # Northbridge + device pci_domain 0 on # PCI domain + device pci 0.0 on end # AGP Bridge + device pci 0.1 on end # Error Reporting + device pci 0.2 on end # Host Bus Control + device pci 0.3 on end # Memory Controller + device pci 0.4 on end # Power Management + device pci 0.7 on end # V-Link Controller + device pci 1.0 on end # PCI Bridge + chip southbridge/via/vt8237r # Southbridge + # Enable both IDE channels. + register "ide0_enable" = "1" + register "ide1_enable" = "1" + # Both cables are 40pin. + register "ide0_80pin_cable" = "0" + register "ide1_80pin_cable" = "0" + device pci f.0 on end # SATA + device pci f.1 on end # IDE + register "fn_ctrl_lo" = "0x80" + register "fn_ctrl_hi" = "0x1d" + device pci 10.0 on end # UHCI + device pci 10.1 on end # UHCI + device pci 10.2 on end # UHCI + device pci 10.3 on end # UHCI + device pci 10.4 on end # EHCI + device pci 10.5 on end # UDCI + device pci 11.0 on # Southbridge LPC + chip superio/ite/it8716f # Super I/O + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.2 off # COM2 (N/A on this board) + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 3 + end + device pnp 2e.4 on # Environment controller + io 0x60 = 0x290 + io 0x62 = 0x0000 + irq 0x70 = 9 + end + device pnp 2e.5 off # PS/2 keyboard (not used) + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 2e.6 off # PS/2 mouse (not used) + irq 0x70 = 12 + end + device pnp 2e.7 on # GPIO + io 0x60 = 0x0000 + io 0x62 = 0x0800 + io 0x64 = 0x0000 + end + device pnp 2e.8 off # MIDI port (N/A) + io 0x60 = 0x300 + irq 0x70 = 10 + end + device pnp 2e.9 off # Game port (N/A) + io 0x60 = 0x201 + end + device pnp 2e.a on # Consumer IR + io 0x60 = 0x310 + irq 0x70 = 11 + end + end + end + device pci 11.5 on end # AC'97 audio + # device pci 11.6 off end # AC'97 modem (N/A) + device pci 12.0 on end # Ethernet + end + end + device apic_cluster 0 on # APIC cluster + chip cpu/via/model_c7 # VIA C7 + device apic 0 on end # APIC + end + end +end diff --git a/src/mainboard/via/vt8454c/Makefile.inc b/src/mainboard/via/vt8454c/Makefile.inc new file mode 100644 index 0000000000..d74c632497 --- /dev/null +++ b/src/mainboard/via/vt8454c/Makefile.inc @@ -0,0 +1,64 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007-2009 coresystems GmbH +## +## This program is free software; you can redistribute it and/or +## modify it under the terms of the GNU General Public License as +## published by the Free Software Foundation; version 2 of +## the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, +## MA 02110-1301 USA +## + +## +## This mainboard requires DCACHE_AS_RAM enabled. It won't work without. +## + +driver-y += mainboard.o + +obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o +obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_HAVE_ACPI_TABLES) += dsdt.o +obj-$(CONFIG_HAVE_ACPI_TABLES) += acpi_tables.o +obj-$(CONFIG_HAVE_ACPI_TABLES) += fadt.o + +initobj-y += crt0.o +# FIXME in $(top)/Makefile +crt0-y += ../../../../src/cpu/x86/16bit/entry16.inc +crt0-y += ../../../../src/cpu/x86/32bit/entry32.inc +crt0-y += ../../../../src/cpu/x86/16bit/reset16.inc +crt0-y += ../../../../src/arch/i386/lib/id.inc +crt0-y += ../../../../src/cpu/via/car/cache_as_ram.inc +crt0-y += auto.inc + +ldscript-y += ../../../../src/arch/i386/init/ldscript_fallback_cbfs.lb +ldscript-y += ../../../../src/cpu/x86/16bit/entry16.lds +ldscript-y += ../../../../src/cpu/x86/16bit/reset16.lds +ldscript-y += ../../../../src/arch/i386/lib/id.lds +ldscript-y += ../../../../src/arch/i386/lib/failover.lds + +ifdef POST_EVALUATION + +$(obj)/dsdt.c: $(src)/mainboard/$(MAINBOARDDIR)/dsdt.asl + iasl -p dsdt -tc $(src)/mainboard/$(MAINBOARDDIR)/dsdt.asl + mv dsdt.hex $@ + +$(obj)/mainboard/$(MAINBOARDDIR)/dsdt.o: $(obj)/dsdt.c + $(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(src) -I. -c $< -o $@ + +$(obj)/mainboard/$(MAINBOARDDIR)/auto.inc: $(src)/mainboard/$(MAINBOARDDIR)/auto.c $(obj)/option_table.h + $(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(src) -I. -c -S $(src)/mainboard/$(MAINBOARDDIR)/auto.c -o $@ + perl -e 's/\.rodata/.rom.data/g' -pi $@ + perl -e 's/\.text/.section .rom.text/g' -pi $@ + +endif + diff --git a/src/mainboard/via/vt8454c/devicetree.cb b/src/mainboard/via/vt8454c/devicetree.cb new file mode 100644 index 0000000000..02f9514984 --- /dev/null +++ b/src/mainboard/via/vt8454c/devicetree.cb @@ -0,0 +1,59 @@ +chip northbridge/via/cx700 + device apic_cluster 0 on + chip cpu/via/model_c7 + device apic 0 on end + end + end + device pci_domain 0 on + device pci 0.0 on end # AGP Bridge + device pci 0.1 on end # Error Reporting + device pci 0.2 on end # Host Bus Control + device pci 0.3 on end # Memory Controller + device pci 0.4 on end # Power Management + device pci 0.7 on end # V-Link Controller + device pci 1.0 on # PCI Bridge + chip drivers/pci/onboard + device pci 0.0 on end + #register "rom_address" = "0xfffc0000" #256k image + register "rom_address" = "0xfff80000" #512k image + #register "rom_address" = "0xfff00000" #1024k image + end # Onboard Video + end # PCI Bridge + device pci f.0 on end # IDE/SATA + #device pci f.1 on end # IDE + device pci 10.0 on end # USB 1.1 + device pci 10.1 on end # USB 1.1 + device pci 10.2 on end # USB 1.1 + device pci 10.4 on end # USB 2.0 + device pci 11.0 on # Southbridge LPC + chip superio/via/vt1211 + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 3 + end + device pnp 2e.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.b on # HWM + io 0x60 = 0xec00 + end + end # superio + end # pci 11.0 + # 1-4 non existant + #device pci 11.5 on end # AC97 Audio + #device pci 11.6 off end # AC97 Modem + #device pci 12.0 on end # Ethernet + end # pci domain 0 +end # cx700 + |