diff options
Diffstat (limited to 'src/mainboard/via/epia')
-rw-r--r-- | src/mainboard/via/epia/Kconfig | 26 | ||||
-rw-r--r-- | src/mainboard/via/epia/board_info.txt | 2 | ||||
-rw-r--r-- | src/mainboard/via/epia/cmos.layout | 72 | ||||
-rw-r--r-- | src/mainboard/via/epia/devicetree.cb | 61 | ||||
-rw-r--r-- | src/mainboard/via/epia/irq_tables.c | 36 | ||||
-rw-r--r-- | src/mainboard/via/epia/romstage.c | 95 |
6 files changed, 0 insertions, 292 deletions
diff --git a/src/mainboard/via/epia/Kconfig b/src/mainboard/via/epia/Kconfig deleted file mode 100644 index 7ee1ed8dcd..0000000000 --- a/src/mainboard/via/epia/Kconfig +++ /dev/null @@ -1,26 +0,0 @@ -if BOARD_VIA_EPIA - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_VIA_C3 - select NORTHBRIDGE_VIA_VT8601 - select SOUTHBRIDGE_VIA_VT8231 - select SUPERIO_WINBOND_W83627HF - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select BOARD_ROMSIZE_KB_256 - select ROMCC - -config MAINBOARD_DIR - string - default via/epia - -config MAINBOARD_PART_NUMBER - string - default "EPIA" - -config IRQ_SLOT_COUNT - int - default 5 - -endif # BOARD_VIA_EPIA diff --git a/src/mainboard/via/epia/board_info.txt b/src/mainboard/via/epia/board_info.txt deleted file mode 100644 index d39a82d807..0000000000 --- a/src/mainboard/via/epia/board_info.txt +++ /dev/null @@ -1,2 +0,0 @@ -Category: mini -Board URL: http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_id=21 diff --git a/src/mainboard/via/epia/cmos.layout b/src/mainboard/via/epia/cmos.layout deleted file mode 100644 index 9050c3db7a..0000000000 --- a/src/mainboard/via/epia/cmos.layout +++ /dev/null @@ -1,72 +0,0 @@ -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -1008 16 h 0 check_sum - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM - -checksums - -checksum 392 1007 1008 diff --git a/src/mainboard/via/epia/devicetree.cb b/src/mainboard/via/epia/devicetree.cb deleted file mode 100644 index d5e16ac008..0000000000 --- a/src/mainboard/via/epia/devicetree.cb +++ /dev/null @@ -1,61 +0,0 @@ -chip northbridge/via/vt8601 - device domain 0 on - device pci 0.0 on end # Northbridge -# device pci 0.1 on # AGP bridge - # device pci 0.0 on end # Integrated VGA -# end - chip southbridge/via/vt8231 - register "enable_native_ide" = "0" - register "enable_com_ports" = "1" - register "enable_keyboard" = "0" - device pci 11.0 on # Southbrdge - chip superio/winbond/w83627hf - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - end - device pnp 2e.6 off end # CIR - device pnp 2e.7 off end # GAME_MIDI_GIPO1 - device pnp 2e.8 off end # GPIO2 - device pnp 2e.9 off end # GPIO3 - device pnp 2e.a off end # ACPI - device pnp 2e.b on # HW Monitor - io 0x60 = 0x290 - end - end - device pci 11.1 on end # Ide - device pci 11.2 off end # Usb port 0-1 - device pci 11.3 off end # Usb port 2-3 - device pci 11.4 off end # ACPI - device pci 11.5 off end # AC97 Audio - device pci 11.6 on end # AC97 Modem - device pci 12.0 on end # Ethernet - end - end - - device cpu_cluster 0 on - chip cpu/via/c3 - device lapic 0 on end - end - end -end diff --git a/src/mainboard/via/epia/irq_tables.c b/src/mainboard/via/epia/irq_tables.c deleted file mode 100644 index 94adba1e87..0000000000 --- a/src/mainboard/via/epia/irq_tables.c +++ /dev/null @@ -1,36 +0,0 @@ -/* This file was generated by getpir.c, do not modify! - (but if you do, please run checkpir on it to verify) - Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up - - Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM -*/ - -#include <arch/pirq_routing.h> - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32+16*CONFIG_IRQ_SLOT_COUNT, /* there can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ - 0, /* Where the interrupt router lies (bus) */ - 0x88, /* Where the interrupt router lies (dev) */ - 0x1c20, /* IRQs devoted exclusively to PCI usage */ - 0x1106, /* Vendor */ - 0x8231, /* Device */ - 0, /* Miniport data */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0x5e, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ - { - /* 8231 ethernet */ - {0,0x90, {{0x1, 0xdeb8}, {0x2, 0xdeb8}, {0x3, 0xdeb8}, {0x4, 0xdeb8}}, 0x1, 0}, - /* 8231 internal */ - {0,0x88, {{0x2, 0xdeb8}, {0x3, 0xdeb8}, {0x4, 0xdeb8}, {0x1, 0xdeb8}}, 0x2, 0}, - /* PCI slot */ - {0,0xa0, {{0x3, 0xdeb8}, {0x4, 0xdeb8}, {0x1, 0xdeb8}, {0x2, 0xdeb8}}, 0, 0}, - {0,0x50, {{0x4, 0xdeb8}, {0x3, 0xdeb8}, {0x2, 0xdeb8}, {0x1, 0xdeb8}}, 0x3, 0}, - {0,0x98, {{0x4, 0xdeb8}, {0x3, 0xdeb8}, {0x2, 0xdeb8}, {0x1, 0xdeb8}}, 0x4, 0}, - } -}; -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/via/epia/romstage.c b/src/mainboard/via/epia/romstage.c deleted file mode 100644 index 5e209409f4..0000000000 --- a/src/mainboard/via/epia/romstage.c +++ /dev/null @@ -1,95 +0,0 @@ -#include <stdint.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <stdlib.h> -#include <console/console.h> -#include "northbridge/via/vt8601/raminit.h" -#include "cpu/x86/mtrr/earlymtrr.c" -#include "cpu/x86/bist.h" -#include "drivers/pc80/udelay_io.c" -#include "lib/delay.c" -#include "lib/debug.c" -#include "southbridge/via/vt8231/early_smbus.c" -#include "southbridge/via/vt8231/early_serial.c" -#include "southbridge/via/vt8231/enable_rom.c" - -static inline int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include "northbridge/via/vt8601/raminit.c" - -static void enable_mainboard_devices(void) -{ - device_t dev; - /* dev 0 for southbridge */ - - dev = pci_locate_device(PCI_ID(0x1106,0x8231), 0); - - if (dev == PCI_DEV_INVALID) - die("Southbridge not found!!!\n"); - - pci_write_config8(dev, 0x50, 7); - pci_write_config8(dev, 0x51, 0xff); -#if 0 - // This early setup switches IDE into compatibility mode before PCI gets - // a chance to assign I/Os - // movl $CONFIG_ADDR(0, 0x89, 0x42), %eax - // movb $0x09, %dl - // movb $0x00, %dl - // PCI_WRITE_CONFIG_BYTE - // -#endif - /* we do this here as in V2, we can not yet do raw operations - * to pci! - */ - /* changed this to work correctly on later revisions of LB. - * The original dev += 0x100; stopped working. It also appears - * that if this is not set here, but in ide_init() only, the IDE - * does not work at all. I assume it needs to be set before something else, - * possibly before enabling the IDE peripheral, or it is a timing issue. - * Ben Hewson 29 Apr 2007. - */ - - dev = pci_locate_device(PCI_ID(0x1106,0x0571), 0); - pci_write_config8(dev, 0x42, 0); -} - -static void enable_shadow_ram(void) -{ - device_t dev = 0; - unsigned char shadowreg; - - shadowreg = pci_read_config8(dev, 0x63); - /* 0xf0000-0xfffff */ - shadowreg |= 0x30; - pci_write_config8(dev, 0x63, shadowreg); -} - -#include <cpu/intel/romstage.h> -static void main(unsigned long bist) -{ - if (bist == 0) - early_mtrr_init(); - - enable_vt8231_serial(); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - vt8231_enable_rom(); - enable_mainboard_devices(); - enable_smbus(); - enable_shadow_ram(); - - /* - this is way more generic than we need. - sdram_initialize(ARRAY_SIZE(cpu), cpu); - */ - sdram_set_registers((const struct mem_controller *) 0); - sdram_set_spd_registers((const struct mem_controller *) 0); - sdram_enable(0, (const struct mem_controller *) 0); -} |